Copper Atoms Research Articles

Microstructural and antibacterial properties of copper oxide deposited on polypropylene fabric by magnetron sputtering

In this study, antibacterial coatings composed of copper and its oxides were deposited on polypropylene (PP) fabrics using magnetron sputtering. The coatings were deposited under varying oxygen partial pressures to facilitate the formation of cupric and cuprous oxides in different quantities. The formation of these oxides was confirmed by the surface morphology (Scanning Electron Microscopy [SEM]) and X-Ray Diffraction (XRD) analysis. Additionally, the antibacterial properties of the coated fabrics were evaluated. The results show that both copper and copper oxides achieved a 4-log reduction in gram-positive bacteria. Inductively Coupled Plasma Mass Spectroscopy (ICPMS) results indicated that the release of copper atoms into water from the coated fabrics was minimal, even after 30 days of immersion.

Structural and computational insights into two completely unanticipated Cu(II) and Ni(II) complexes derived from a bifunctional salamo-type bis(pyridine)-arm ligand

A bifunctional Salamo-type bis(pyridine)-arm ligand H2L (4,4′-Methyl-6,6′-pyridinenitrilomethylidyne-2,2′-[ethylenedioxybis(nitrilomethylidyne)]diphenol) was designed and synthesized, which can react with Cu(II) and Ni(II) nitrates to hydrolyze & break the C = N double bonds of new ligand H2L′ (4,4′-Methyl-6,6′-formal-2,2′-[ethylenedioxybis(nitrilomethylidyne)]diphenol). The ligand reacted with Cu(II) and Ni(II) salts to form respectively complexes [Cu(L′)] (1) and [Ni2(L′)(H2O)2](NO3)2 (2). They were elucidated by single crystal X-ray method. Many important noncovalent interactions, such as intramolecular hydrogen bonding, intermolecular hydrogen bonding and π···π stacking interactions, can be observed in the crystal structures of the two complexes. IR & UV–Vis absorbent spectroscopic analysis showed that the ligand unit is involved in the coordination with copper(II) and nickel(II) atoms, and ultraviolet titration and fluorescence titration spectra verified that the coordinating radios of the two complexes formed in liquid phase are in accordance with those of single-crystal X-ray diffraction. Through DFT theoretical calculations and electrostatic potential analyses (MESP) of the ligand and its complexes, the configuration of the ligand at the lowest energy were deeply understood, and it was demonstrated that the coordination reaction at salamo sites requires a great torsional force, and the weak intermolecular interaction force and the energy gaps of HOMO-LUMO orbitals were profoundly discussed, and the Cu(II) and Ni(II) complexes exhibit anomalous fluorescence enhancement behaviors.

Copper (II) and cobalt (II) bis(hexafluoroacetylacetonate) coordination complexes with N-styrylbenzimidazole

The study considers metal complexes based on N-styrylbenzimidazole as compounds having significant pharmacological properties The work is aimed at examining the crystal structure and electronic structure of transition metal bis(hexafluoroacetylacetonate) complexes (copper (II) (complex A) and cobalt (II) (complex B)) with N-styrylbenzimidazole using X-ray diffraction analysis and ultraviolet spectroscopy. The X-ray diffraction analysis was used to prove bipyramidal coordination in copper (II) and cobalt (II) bis(hexafluoroacetylacetonate) complexes with N-styrylbenzimidazole. The atoms of copper (II) and cobalt (II) in the complexes exhibit an unusual for β-diketonate complexes distorted square-planar coordination, while the chelate cycles in M(hfacac)2L are characterized by anomalously large kink angles. Thus, for the copper (II) bis(hexafluoroacetylacetonate) complex, the kink angle of the O3∙∙∙O4 interaction for the equatorially positioned ligand is 29.47°, while for the axially positioned ligand, the kink angle of the O1∙∙∙O2 interaction is 19.13°. For the cobalt (II) bis(hexafluoroacetylacetonate) complex, these angles are 22.10 and 19.50°, respectively. Electron spectroscopy was used to examine the electronic structure of the specified complexes. The following types of electronic transitions were identified: π→π*-transitions primarily localized on ligands, as well as transitions caused by electron transfer from the p-orbital of the hetero nitrogen atom of the styrylbenzimidazole cycle to the d-orbital of metal ions, and n→π transition localized on the imidazole ring. For each of the complexes, d-d* transitions between the molecular orbitals of the corresponding metal ion were localized in the long wavelength part of the spectrum.

A (2-(Pyrrolidin-1-yl)ethan-1-olate)(1-oxo-3-phenyl-1,4-dihydronaphthalen-2-olate) μ-Oxo-Bridged Dicopper(II) Dimeric Complex

The reaction of 2-(1H-pyrrol-1-yl)ethanol with 3-hydroxyflavone in the presence of copper(II) bromide yielded a dimeric copper(II) complex, [μ-O-(κ2-O,O-flav)(κ2-N,O-2PEO)Cu]2 (1) (flav = 3-hydroxyflavonolate; 2PEO = 2-(1H-pyrrol-1-yl)ethanolate) with both the flav and 2PEO ligands bound to the copper(II) atom in a κ2-bonding mode. The dimer is held electrostatically by bridging oxygen atoms between two copper atoms. Complex 1 was characterized by single-crystal X-ray diffraction, infrared, and UV-Vis spectroscopy, elemental analysis, and melting point determination. The complex crystallizes in the monoclinic space group P21/n (14) with cell values of a = 11.85340(10) Å, b = 8.51480(10) Å, c = 23.8453(2) Å; β = 99.3920(10)°.

Understanding the Adsorption Mechanism of BTPA, DEPA, and DPPA in the Separation of Malachite from Calcite and Quartz: DFT and Experimental Studies

The relationship between the structure of bis (2,4,4-trimethylpentyl) phosphinic acid (BTPA), diethyl phosphinic acid (DEPA), and diphenyl phosphinic acid (DPPA) on the flotation performance of malachite was investigated. Through a series of flotation experiments, density functional theory (DFT) calculations, and surface analysis methods, we aimed to deeply understand the microscopic mechanism of the interactions between these collectors and the malachite surface. The experimental results showed that BTPA exhibited excellent selectivity and flotation performance for malachite in the pH range of 5.0–11.0, significantly better than DEPA and DPPA. Surface analysis evidence from X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FT-IR) further confirmed the chemical adsorption characteristics of BTPA on the malachite surface. DFT calculations revealed that the adsorption capacity of BTPA on the malachite surface exceeds that of DEPA and DPPA. Electron transfer analysis, especially through frontier molecular orbital theory, differential charge density, PDOS, and COHP analysis, indicated that the charge transfer process from the s orbitals of oxygen atoms in the collectors to the d orbitals of copper atoms on the mineral surface is the decisive factor for the adsorption strength.

Critical Role of Cu Nanoparticle-Loaded Cu(100) Surface Structures on Structured Copper-Based Catalysts in Boosting Ethanol Generation in CO2 Electroreduction.

Presently, realizing high ethanol selectivity in CO2 electroreduction remains challenging due to difficult C-C coupling and fierce product competition. In this work, we report an innovative approach for improving the efficiency of Cu-based electrocatalysts in ethanol generation from electrocatalytic CO2 reduction using a crystal plane modification strategy. These novel Cu-based electrocatalysts were fabricated by electrochemically activating three-dimensional (3D) flower-like CuO micro/nanostructures grown in situ on copper foils and modifying with surfactants. It was demonstrated that the fabricated Cu-based electrocatalyst featured a predominantly exposed Cu(100) surface loaded with high-density Cu nanoparticles (NPs). The optimal Cu-based electrocatalyst displayed considerably improved CO2 electroreduction performance, with a Faraday efficiency of 37.9% for ethanol and a maximum Faraday efficiency of 68.0% for C2+ products at -1.4 V vs RHE in an H-cell, accompanied by a high current density of 69.9 mA·cm-2, much better than the particulate Cu-based electrocatalyst. It was unveiled that the Cu(100)-rich surface of nanoscale petals with abundant under-coordinated copper atoms from CuNPs was conducive to the formation and stabilization of key *CH3CHO and *OC2H5 intermediates, thereby promoting ethanol generation. This study highlighted the critical role of CuNP-loaded Cu(100) surface structures on structured Cu-based electrocatalysts in enhancing ethanol production for the CO2 electroreduction process.

Crystal structure, theoretical calculations, mechanoluminescence feature and antimicrobial activity based on a double-armed Salamo-type ligand and its trinuclear Cu(Ⅱ) complex

A double-armed salamo-type ligand H4L and its Cu(Ⅱ) complex have been designed and synthesized. The stoichiometric ratios of the prepared H4L and its Cu(Ⅱ) complex were structurally characterized by a variety of analytical and spectroscopic techniques, including elemental analysis, FT-IR, UV–visible, fluorescence spectroscopy, and X-ray crystal diffraction. The results showed that H4L is a linear molecule, while the Cu(Ⅱ) complex is a trinuclear structure with three copper atoms exhibiting different coordination modes due to varying coordination cavities and bridging atoms. The quantum chemical parameters and molecular structures of the H4L and the Cu(Ⅱ) complex have been theoretically calculated and studied. Using molecular electrostatic potential (MEP) and density functional theory (DFT) calculations to understand the selectivity of the H4L and the Cu(Ⅱ) complex chemistry and related reactions. Detailed energy level transitions of the H4L and the Cu(Ⅱ) complex can be determined through time-dependent density functional theory (TD-DFT) calculations. In studying the fluorescence properties of liquid and solid states, it was observed that increasing water content leads to the formation of excimer in both the H4L and its Cu(Ⅱ) complex, the ligand H4L shown good mechanoluminescence, but the Cu(Ⅱ) complex did not. We studied the antimicrobial effectiveness of the H4L and the Cu(Ⅱ) complex against E. coli., the Cu(Ⅱ) complex showed higher inhibition of the pathogenic microorganisms.

Microsolvation of cobalt, nickel, and copper atoms with ammonia: a theoretical study of the solvated electron precursors.

The s-block metals dissolved in ammonia form metal-ammonia complexes with diffuse electrons which could be used for redox catalysis. In this theoretical paper, we investigated the possibility of the d-bloc transition metals (Mn, Fe, Co, Ni, and Cu) solvated by ammonia. It has been demonstrated that both Mn and Fe atoms undergo into an oxidative reaction with NH3 forming an inserted species, HMNH2. On the contrary, the Co, Ni, and Cu atoms can accommodate four NH3, via the coordination bond, to form the first solvation sphere within C2v, D2d, and Td point groups, respectively. Addition of a fifth NH3 constitute the second solvation shell by forming hydrogen bond with the other NH3s. Interestingly, M(NH3)4 (M = Co, Ni, and Cu) is a so-called solvated electron precursor and should be considered as a monocation M(NH3)4+ kernel in tight contact with one electron distributed over its periphery. This nearly free electron could be used to capture a CO2 molecule and engages in a reduction reaction. Geometry optimization of the stationary points on the potential energy surface was performed using density functional theory - CAM-B3LYP functional including the GD3BJ dispersion contribution - in combination with the 6-311 + + G(2d, 2p) basis set for all the atoms. All first-principles calculations were performed using the Gaussian 09 quantum chemical packages. The natural electron configuration of transition atom engaged in the compounds has been found using the natural bond orbital (NBO) method. We used the EDR (electron delocalization range) approach to analyze the structure of solvated electrons in real space. We also used the electron localization function (ELF) to measure the degree of electronic localization within a chemical compound. The EDR and ELF analyses are done using the TopMod and Multiwfn packages, respectively.

Direct formation of copper nanoparticles from atoms at graphitic step edges lowers overpotential and improves selectivity of electrocatalytic CO2 reduction

A key strategy for minimizing our reliance on precious metals is to increase the fraction of surface atoms and improve the metal-support interface. In this work, we employ a solvent/ligand/counterion-free method to deposit copper in the atomic form directly onto a nanotextured surface of graphitized carbon nanofibers (GNFs). Our results demonstrate that under these conditions, copper atoms coalesce into nanoparticles securely anchored to the graphitic step edges, limiting their growth to 2–5 nm. The resultant hybrid Cu/GNF material displays high selectivity in the CO2 reduction reaction (CO2RR) for formate production with a faradaic efficiency of ~94% at -0.38 V vs RHE and a high turnover frequency of 2.78 × 106 h-1. The Cu nanoparticles adhered to the graphitic step edges significantly enhance electron transfer to CO2. Long-term CO2RR tests coupled with atomic-scale elucidation of changes in Cu/GNF reveal nanoparticles coarsening, and a simultaneous increase in the fraction of single Cu atoms. These changes in the catalyst structure make the onset of the CO2 reduction potential more negative, leading to less formate production at -0.38 V vs RHE, correlating with a less efficient competition of CO2 with H2O for adsorption on single Cu atoms on the graphitic surfaces, revealed by density functional theory calculations.

Application, structure, salts and complexes of lidocaine: a review. Part V. structure of bis(lidocaine) tetrachloridocuprate(II)

The review focuses on lidocaine (2-(diethylamino)-N-(2,6-dimethylphenyl)acetamide): in the first part, its use in various branches of medicine, as well as the structure of lidocaine, its salts and molecular complexes was discussed; in the second part the use of lidocaine in the composition of deep-eutectic solvents (DES), DES-microemulsions and complexes of lidocaine with zinc, copper, cobalt, platinum and iron was considered; in the 3rd the structure of bis(lidocaine) tetrachlorido-zincate(II) was considered, in the 4th part the structure of bis(lidocaine) tetrachloridoferrate(III) chloride was discussed, this part reports on the synthesis and structure of bis(lidocaine) tetra-chloridocuprate(II), (LidH)2[CuCl4], which crystallizes in the monoclinic space group P21/c with a = 15.7831(2), b = 24.2992(2), c = 17.8748(2) Å, β = 104.874(1)°, V = 6625.58(13) Å3, Z = 8, and Dc = 1.355 Mg/m3. The coordination of the Cu2+ ions with chlorine atoms generates two differently distorted tetrahedral anions [CuCl4]2–, while four protonated cations LidH+ remain in an outer coordination sphere. Anions and cations are associated by hydrogen bonds of the N–H···Cl type to form the 2{(LidH)2[CuCl4]} dimer, in which the distance between two copper atoms is 8.95 Å (c/2). With the help of hydrogen bonds of the type N–H···O and N–H·Cl, each dimer is connected with four neighboring dimers, resulting in a three-dimensional structure in which dimers lie at an angle of 28.39° to the a crystallographic axis in the ab planes located at a distance of 10.67 Å from each other.

The mechanism of recrystallization of binary aluminum and tin bronzes

A nanostructural mechanism for recrystallization of binary aluminum and tin bronzes has been developed. First, structure-forming nanocrystals of α-phases, β-phases and γ-phases are formed from elementary nanocrystals of copper, aluminum, tin and their free atoms. The crystallization centers of microcrystals of phases are formed from them. From these centers, structure-forming nanocrystals of phases, free atoms of copper, aluminum, tin, microcrystals of α-phases, β-phases and γ-phases of binary aluminum and tin bronzes are formed.

A comparative DFT study of CO and NO capture by copper- and titanium-functionalized SiC and GeC monolayers

In this work, the interactions of NO and CO molecules with silicon carbide (SiC) and germanium carbide (GeC) graphene-like nanosheets, functionalized with titanium and copper atoms, are comparatively studied through density-functional calculations. The results indicate that NO and CO molecules are only slightly adsorbed on the pristine carbide nanosheets. Also, the copper and titanium adatoms are chemisorbed on the monolayers, leading to stable functionalized carbide nanosheets. These adatoms greatly enhance the binding energies of CO and NO. In particular, the titanium-functionalized GeC monolayers display the highest adsorption energies for CO and NO and also the largest changes in their work functions upon molecule adsorption, indicating that they could be useful for trapping or detecting these molecules.

1D-Coordination Polymer of Copper(I) thiocyanate complex with metronidazole: Synthesis, crystal structure, Hirshfeld surface analysis, PXRD, Spectroscopic properties, MEP, QTAIM, π(CN)···tetrel interaction, RDG, and thermal analysis

Within 24 h of slow evaporation of the solution containing CuCl2·2H2O, metronidazole, and NH4SCN, a red-like crystalline Cu(I) complex titled [Cu(SCN)(mnz)]n (1), [where mnz = metronidazole; SCN = thiocyanate], was synthesized. The presence of SCN− during the synthesis induces reduction of the Cu(II) to Cu(I) giving rise to novel 1D coordination polymer. The compound was characterized by single crystal X-ray diffraction, powdered X-ray diffraction, spectroscopic proprieties, and Hirshfeld surface analysis. [Cu(SCN)(mnz)]n crystallizes in the monoclinic space group P21/c. The complex possesses a 1D layer structure constructed by linking the staircase-like [CuSCN]n chains. Intermolecular interactions in the crystals investigation via Hirshfeld surface analysis reveals the major contribution is from O···H/H···O interaction (22.9 %), which is due to the presence of hydrogen bonds of the O − H···O type. The thermal properties were investigated using DTA-TGA and DSC. The study comprises the interpretation of non-covalent interactions through Quantum Theory of Atoms in Molecules (QTAIM), Natural Bond Orbital (NBO) analyses, and Reduced Density Gradient (RDG). The results show the role of interactions between SCN− and mnz through multiple connections involving the oxygen, nitrogen, and sulfur lone pairs and π-bonds for constructing the unit cell. The non-covalent arrangements include very weak hydrogen bonds that cooperatively stabilize the crystal. Along with SCN− bridging copper atoms, growth in the ab plane is favored by an uncommon π···π interaction between SCN− and the imidazole ring of mnz. In this interaction, the π(SN) and π(CN) orbitals perturb the imidazole π(CN) orbital with energies of 0.36 and 0.22 kcal/mol, respectively. In the c direction, a hydrogen bond between the hydroxyl group and CH- fragment from different mnz molecules assists structure stabilization. It is accompanied by a rarely observed π(CN)···tetrel interaction, wherein SCN− donates π-electron density to the antibonding σ(CH) orbital of the methyl carbon.

Machining mechanism and residual stress of AlCuCrFeNi alloy

This investigation utilizes molecular dynamics simulations to explore the mechanical response of the AlCuCrFeNi high-entropy alloy to nano-scraping employing an abrasive tip traversing the workpiece surface. This study investigates the influence of various parameters, such as grain size, pressing depth, alloy composition, temperature, and sliding distance, on plastic deformation, frictional behavior, dislocation density, wear mechanisms, and von Mises stress. The results reveal that increasing grain size leads to augmented force and hardness, indicative of a reverse Hall-Petch relationship. Moreover, scraping and indentation forces escalate with decreasing aluminum concentration and temperature. The analysis underscores the pivotal role of grain boundaries in impeding stress and strain propagation. Stress and strain concentrations are particularly evident at the interface between the scraping tool and the substrate and near the grain boundaries. Grain boundary slipping, bending, and grain merging are pivotal mechanisms contributing to the distortion of polycrystalline materials, culminating in solid dislocations within grain boundaries. Furthermore, heightened compression depth and sliding distance exacerbate plastic deformation and subsurface damage. Notably, the presence of copper atoms enhances the HEA's resistance to deformation. This research enhances comprehension of the nano-scraping behavior and deformation mechanisms in AlCuCrFeNi HEA during ultra-precision processing.

Properties of the ionization region in a magnetron plasma at gas-aggregation-source-relevant pressure regime explored using a global model

A global (volume averaged) model is developed for the ionization region (IR) of a gas aggregation source (GAS) plasma. The case of using argon gas and a copper target is considered. The model describes the densities of thermal and hot electrons, argon and copper ions, copper atoms and argon atoms in different excited states, the temperature of thermal electrons, the kinetic energies of the ions with which they bombard the target, the sheath width near the target cathode and the energy fluxes by different plasma species to a planar probe in the IR. Also, the fraction of input power is estimated which is dissipated to energize the thermal electrons in the IR. The gas discharge properties are analyzed for different pressures and discharge currents under conditions corresponding to the experimental conditions (Gauter et al 2018 J. Appl. Phys. 124 073301). The calculated pressure- and current-dependences for the GAS properties are used to explain the measured dependences for the deposition rate and the energy flux. It is found that the deposition rate increases with increasing discharge current because of the growth of currents of copper atoms and ions. With increasing pressure, the rate decreases due to drop of the densities of copper atoms and ions because of decreasing the kinetic energies of the ions with which they bombard the target. The model indicates that in the gas-aggregation-source relevant pressure regime, the energy flux by ions dominates over the energy fluxes of other plasma species.

Modelling on a Biomimetic [Cu-O-Cu]2+-mediated Methane-to-Methanol Conversion Unveils the Site for Methane Activation.

The Cu-O-Cu core exhibits methane-to-methanol conversion, mirroring the reactivity of the copper-containing enzyme pMMO. Herein, we computationally examined the reactivity of a biomimetic Cu-O-Cu core towards methane-to-methanol conversion. The oxygen atom of the Cu-O-Cu core abstracts hydrogen present in the C-H bond of methane. The spin density at the bridging oxygen helps to abstract hydrogen from the C-H bond. We modulated the spin density of the bridging oxygen by substituting only a single copper atom of the Cu-O-Cu core by metals (M) such as Fe, Co, and Ag. These substitutions result in bimetallic [Cu-O-M]2+ models. We observed that the energy barriers for the C-H activation step and the subsequent rebound step vary with the metal M. [Cu-O-Ag]2+ exhibits the highest reactivity for M2M conversion, while [Cu-O-Fe]2+ displays the lowest reactivity. To understand the different reactivity of these models towards M2M conversion, we employed distortion-interaction analysis, orbital analysis, spin density analysis, and quantum theory of atoms in molecules analysis. Orbital analysis reveals that all four adducts follow a hydrogen atom transfer mechanism for C-H activation. Further, spin density analysis reveals that a higher spin density on the bridging oxygen leads to a lower C-H activation barrier.

Elucidating atomic emission and molecular absorption spectra using a basic CD spectrometer: a pedagogical approach for secondary-level students

Abstract Spectroscopy has held a pivotal role in advancing our comprehension of chemistry, dating back to its inception by Robert Bunsen and Gustav Kirchhoff. Nonetheless, access to advanced spectrometers remains restricted, particularly in high schools within developing nations. In this laboratory experiment, students were guided to fashion a spectrometer using reusable materials. This uncomplicated contrivance facilitated the exploration of emission and absorption spectroscopy, acquainting students with atomic spectra marked by electronic transitions, yielding line spectra. Conversely, molecules display not solely electronic transitions, but also vibrational and rotational shifts within chemical bonds, culminating in band spectra. Mobile phone cameras were enlisted as detectors. Captures of sodium and copper atoms emitting light in the course of a flame test, as well as depictions of molecular entities (copper sulphate pentahydrate and potassium permanganate aqueous solutions) absorbing light, were transmuted into the RGB (Red-Green-Blue) color model channels. The learning outcomes exhibited that 86 % of the students successfully discerned between an atomic spectrum and a molecular spectrum. Furthermore, 93 % of the students indicated that the incorporation of mobile devices in fostering scientific comprehension effectively seized their attention, resulting in heightened levels of engagement.

Effect of arsenate and phosphate substitution on hydroxyl group in libethenite Cu2PO4OH - olivenite Cu2AsO4OH solid solution series

Libethenite and olivenite have been regarded as intriguing photocatalysts because of their singular structures. Copper hydroxy-phosphates and -arsenates exhibit distinctive properties: they incorporate bridging hydroxyl (OH) groups shared by neighboring copper atoms. In materials employed for photoelectrochemical applications, the significance of surface OH groups and OH-related defects frequently varies and is contingent upon the specific material system and the reaction under consideration. Hydroxyl groups can enhance photocatalytic performance by generating OH radicals or serving as crucial agents in catalytic reactions. Therefore, the presence of an OH group within the crystal structure of the material can give rise to potentially interesting behaviors. Seven compounds within the solid solution series of libethenite Cu2PO4OH and olivenite Cu2AsO4OH with stoichiometric ratio (Cu2(Px,As1- xO4)OH, x = 0, 0.1, 0.3, 0.5, 0.7, 0.9, 1 were synthesized at 70 °C via aqueous solutions, and their properties were examined using X-ray diffraction (XRD), Scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS), Fourier-transform infrared spectroscopy (FTIR) and Raman spectroscopy. The effect of substituting (PO4)3– ions with (AsO4)3– ions on the alteration of the lattice parameters and spectral characteristics was elucidated by analyzing the correlation between the chemical composition and X-Ray diffraction peak positions. The substitution process leads to modifications in the unit cell parameters and volume. These isomorphic substitutions can be also discerned through alterations in the infrared and Raman spectra, which exhibit variations in the position and intensity of the bands corresponding to phosphates, arsenates, and hydroxyl ions. The incorporation of As into the solid solution resulted in altered bond lengths and geometries, which is consistent with the symmetry transition from orthorhombic libethenite to monoclinic olivenite. The variations in the unit cell parameters and the shifts in the peak position exhibited non-linear trends, and a discernible step was observed between the Cu2(P0·3As0.7)O4OH and Cu2(P0·5As0.5)O4OH intermediate phases. The findings of this study will prove beneficial in evaluating the feasibility of the libethenite-olivenite isometric series as a photocatalysts.

Combating Atherosclerosis with Chirality/Phase Dual-Engineered Nanozyme Featuring Microenvironment-Programmed Senolytic and Senomorphic Actions.

Senescence plays a critical role in the development and progression of various diseases. This study introduces an amorphous, high-entropy alloy (HEA)-based nanozyme designed to combat senescence. By adjusting the nanozyme's composition and surface properties, this work analyzes its catalytic performance under both normal and aging conditions, confirming that peroxide and superoxide dismutase (SOD) activity are crucial for its anti-aging therapeutic function. Subsequently, the chiral-dependent therapeutic effect is validated and the senolytic performance of D-handed PtPd2CuFe across several aging models is confirmed. Through multi-Omicsanalyses, this work explores the mechanism underlying the senolytic action exerted by nanozyme in depth. It isconfirm that exposure to senescent conditions leads to the enrichment of copper and iron atoms in their lower oxidation states, disrupting the iron-thiol cluster in mitochondria and lipoic acid transferase, as well as oxidizing unsaturated fatty acids, triggering a cascade of cuproptosis and ferroptosis. Additionally, the concentration-dependent anti-aging effects of nanozyme is validated. Even an ultralow dose, the therapeutic can still act as a senomorphic, reducing the effects of senescence. Given its broad-spectrum action and concentration-adjustable anti-aging potential, this work confirms the remarkable therapeutic capability of D-handed PtPd2CuFe in managing atherosclerosis, a disease involving various types of senescent cells.

Electrocatalytic Nitrate Reduction on Metallic CoNi-Terminated Catalyst with Industrial-Level Current Density in Neutral Medium.

Green ammonia synthesis through electrocatalytic nitrate reduction reaction (eNO3RR) can serve as an effective alternative to the traditional energy-intensive Haber-Bosch process. However, achieving high Faradaic efficiency (FE) at industrially relevant current density in neutral medium poses significant challenges in eNO3RR. Herein, with the guidance of theoretical calculation, a metallic CoNi-terminated catalyst is successfully designed and constructed on copper foam, which achieves an ammonia FE of up to 100% under industrial-level current density and very low overpotential (-0.15V versus reversible hydrogen electrode) in a neutral medium. Multiple characterization results have confirmed that the maintained metal atom-terminated surface through interaction with copper atoms plays a crucial role in reducing overpotential and achieving high current density. By constructing a homemade gas stripping and absorption device, the complete conversion process for high-purity ammonium nitrate products is demonstrated, displaying the potential for practical application. This work suggests a sustainable and promising process toward directly converting nitrate-containing pollutant solutions into practical nitrogen fertilizers.