Copolymer Films Research Articles

Effect of material properties and extrusion process parameters on permeability of etonogestrel in ethylene vinyl acetate copolymer (EVA) films

Ethylene vinyl acetate copolymers (EVA) have been extensively used in controlled drug delivery systems due to its good biocompatibility and tunable applicability based on simple variations in vinyl acetate (VA) content. We investigated impacts of material properties of EVA, including VA content and molecular weight, as well as extrusion process parameters, including draw down ratio and cooling rate, on permeability of etonogestrel in EVA films. Among all factors studied, the VA content was the most dominant factor that controls drug permeability by affecting crystallinity of EVA. MW, DDR, and cooling rate exhibited less significant effects. The impacts of these factors on crystallinity, crystallite size, and degree of crystalline orientation of EVA were characterized using polarized light microscope, differential scanning calorimetry (DSC) and wide-angle X-ray scattering (WAXS). Based on the solution-diffusion model, the mechanisms by which the crystalline properties controlled drug solubility and diffusivity in EVA were discussed. These results can be applied to investigate the effects of material properties of EVA and manufacturing process conditions on drug release properties of reservoir-type EVA-based drug delivery systems with a rate-controlling membrane.

Drop-Cast Hybrid Poly(styrene)-b-Poly(ethylene oxide) Metal Salt Films: Solvent Evaporation and Crystallinity-Dependent Evolution of Film Morphology.

Morphology templates of solution-based diblock copolymer (DBC) films with loading metal salts are widely applied in photocatalysts, photovoltaics, and sensors due to their adjustable characteristics based on surface (de-)wetting and microphase separation. The present work investigates the morphologies of drop-cast hybrid films based on poly(styrene)-b-poly(ethylene oxide) (PS-b-PEO) and the metal salts titanium isopropoxide (TTIP) and zinc acetate dehydrate (ZAD) in comparison to the pure DBC. By utilizing scanning electron microscopy, grazing-incidence small- and wide-angle X-ray scattering, and differential scanning calorimetry, we find that the resulting film morphologies depend not only on the presence of metal salts but also on solvent evaporation and crystalline formation. At 20 °C, additional TTIP and ZAD in the polymer template cause the morphology to change from packed globular structures to separated wormlike structures attributed to the changed polymer environment. Furthermore, additional tetrahydrofuran causes irregular structures at the precursor film part and the overlapped wormlike structures to transition into close-packed globular structures at the cap film parts of the pure DBC. In contrast, at 50 °C, the globular structures transit to fingerprint patterns due to the thermal behavior of the crystallizable PEO blocks, and the metal salt additives suppress crystalline structure formation in the PEO domains.

Highly Alternating Copolymer of [1.1.1]Propellane and Perfluoro Vinyl Ether: Forming a Hydrophobic and Oleophobic Surface with

Utilizing the unique properties of fluorine substitution is an effective strategy for constructing highly functional materials. Here, we synthesized a novel copolymer composed of [1.1.1]propellane and perfluoro(propyl vinyl ether) (PPVE), rich in alternating sequences. The spin-coated copolymer film was amorphous, and its surface exhibited an extremely low surface free energy (γ). The γ value was lower than that of polytetrafluoroethylene despite containing only 40 mol % PPVE units. This can be attributed to the cancellation of the C-F dipole moments by the entirely random orientation of the fluorine units.

A liquid static culture using a gas-permeable film bag contributes to microbiology

We propose a simple tool for liquid static culture using a copolymer film with high gas permeability. The film bags were successfully used to culture microorganisms Escherichia coli, Komagataella phaffii (methylotrophic) and Bacillus sp. (biofilm-forming), with cells cultured under physical stress-free conditions with sufficient oxygen supply. Similar growth curves and plasmid productivity were observed for liquid shake and film bag E. coli cultures. The early growth response of the film bag culture following colony inoculation of liquid media differed from conventional shake cultures. Our results indicate that a gas-permeable film bag is a promising liquid culture tool and provides novel microbiology materials.

Fabrication and Thermoresponsive Properties of Thin Copolymer Films of N-Isopropylacrylamide and Acrylamide

Fabrication and Thermoresponsive Properties of Thin Copolymer Films of N-Isopropylacrylamide and Acrylamide

Polyetherimide copolymer film with room-temperature self-healing properties and high breakdown field strength

With the waste of resources caused by human activities, it has gradually become an increasingly prominent social problem. The development of self-healing polymers in the field of insulation has attracted widespread attention. Develop polymer matrices with efficient healing efficiency and sound insulation properties to achieve green and sustainable resource conservation. In addition, improving the dielectric properties of intrinsic self-healing matrices has been a hot topic. In this work, we developed a new PEI matrix-modified self-healing polymer substrate that provides a breakdown field strength of 240 kV/mm and self-healing properties at room temperature, this has significantly improved the dielectric properties over other previously reported self-healing polymers. In addition to the abovementioned performance, we found significant differences in thermodynamic behavior in the synthesized end-modified polymers. By dielectric characterization (LCR), the breakdown composite can be left at room temperature for 60 min, and the material can recover 80 % of the initial properties without external intervention(This is demonstrated by the fact that its DC conductivity at 60 min of autonomous healing was significantly changed from that of the freshly electrically pierced DC conductivity and remained around 5.38 × 10−11 S/cm for a longer period of time thereafter). The microscopic morphology of the modified PEI matrix was observed by scanning electron microscopy (SEM) and EDS surface elemental analysis, which further supports the existence of metal coordination structures. These findings can further deepen the thinking of self-healing dielectric composites. The work inspired by this may break the limits and take self-healing composite dielectric materials to a new height.

Bioactive modification of cyclic olefin copolymer (COC) film surfaces by hyaluronic acid and chitosan for enhanced cell adhesion

Cyclic olefin copolymer (COC) has recently emerged as an attractive material in biomedical fields for its high purity, excellent stability and chemical resistance, particularly in applications of microfluidic chips, prefilled syringes and bone regeneration. However, the high hydrophobicity of COC has inhibited the adhesion of cells and biological macromolecules, such as proteins, etc., significantly limiting its broader applications. In this study, we propose a new method to modify COC surfaces by sequential coating with polydopamine (PDA) followed by hyaluronic acid (HA) or O-carboxymethyl chitosan (CMC), while comparing the impacts of the positively charged HA and negatively charged CMC on protein adsorption and cell adhesion. FTIR and XPS measurements confirmed the successful modification on COC films, resulting in surfaces with highly increased hydrophilicity, anti-oxidative properties, and improved protein adsorption. Moreover, negatively charged HA, with signal transduction capabilities showed a greater effect in promoting cell adhesion. Thus, we present a straightforward strategy for enhancing the hydrophilicity of COC surfaces, offering new insights into COC modification and potential biomedical applications.

Engineering Thermoresponsive Poly(N-isopropylacrylamide)-Based Films with Enhanced Stability and Reusability for Efficient Bone Marrow Mesenchymal Stem Cell Culture and Harvesting.

Poly(N-isopropylacrylamide) (PNIPAM) offers a promising platform for non-invasive and gentle cell detachment. However, conventional PNIPAM-based substrates often suffer from limitations including limited stability and reduced reusability, which hinder their widespread adoption in biomedical applications. In this study, PNIPAM copolymer films were formed on the surfaces of glass slides or silicon wafers using a two-step film-forming method involving coating and grafting. Subsequently, a comprehensive analysis of the films' surface wettability, topography, and thickness was conducted using a variety of techniques, including contact angle analysis, atomic force microscopy (AFM), and ellipsometric measurements. Bone marrow mesenchymal stem cells (BMMSCs) were then seeded onto PNIPAM copolymer films prepared from different copolymer solution concentrations, ranging from 0.2 to 10 mg·mL-1, to select the optimal culture substrate that allowed for good cell growth at 37 °C and effective cell detachment through temperature reduction. Furthermore, the stability and reusability of the optimal copolymer films were assessed. Finally, AFM and X-ray photoelectron spectroscopy (XPS) were employed to examine the surface morphology and elemental composition of the copolymer films after two rounds of BMMSC adhesion and detachment. The findings revealed that the surface properties and overall characteristics of PNIPAM copolymer films varied significantly with the solution concentration. Based on the selection criteria, the copolymer films derived from 1 mg·mL-1 solution were identified as the optimal culture substrates for BMMSCs. After two rounds of cellular adhesion and detachment, some proteins remained on the film surfaces, acting as a foundation for subsequent cellular re-adhesion and growth, thereby implicitly corroborating the practicability and reusability of the copolymer films. This study not only introduces a stable and efficient platform for stem cell culture and harvesting but also represents a significant advance in the fabrication of smart materials tailored for biomedical applications.

Dilatational rheological studies on the surface micelles of Poly(styrene)-[formula omitted]-Poly(4-vinyl pyridine) block copolymer at the air-water interface

A thin film of an amphiphilic block copolymer, poly(styrene)-b-poly(4-vinyl pyridine), is investigated at the air–water interface. The surface pressure - area per molecule isotherm and the static compressional modulus provide evidence of two phases, assigned as L1 and L2, respectively. The surface topography and the phase images of these phases obtained using atomic force microscope reveal the presence of surface micelles of different sizes and densities. The dilatational rheology of these phases was investigated using the oscillatory barrier method for different strain amplitudes (1−5%) and qualitatively assessed using Lissajous–Bowditch curves. It points out the emergence of nonlinearity (asymmetric shape and distorted ellipse) with an increase in strain amplitude. Using a fast Fourier transform, the amplitudes and the phases of different harmonics of the stress–strain curves were extracted, and the total harmonic distortion was determined. In contrast to L1 phase, the total harmonic distortion for the L2 phase increases monotonically with strain amplitude. Fixing the strain amplitude at 1% (small amplitude regime), the temperature as well as frequency dependence studies of the dilatational moduli were carried out. The dynamic storage moduli of the L1 phase is found to be insensitive to temperature while it decreases for the L2 phase suggesting softening. Further, evidence for solid-like viscoelastic response emerges (explained using the Kelvin–Voigt model) for the L1 phase, whereas the L2 phase show a cross-over behaviour.

Overcoming strength-ductility and functional period-degradability tradeoffs: Multifunctional biodegradable polyesters with ionic cluster skeleton and PDMS skin

To overcome the strength-ductility and functional period-degradability tradeoffs of biodegradable polyesters, we proposed a nanophase structure design strategy to construct a soft-hard dual phase in poly(butylene succinate) (PBS) copolymers by simultaneously introducing polydimethylsiloxane (PDMS) and isophthalate-5-sulfonate (SIPM) on PBS macromolecular chains to improve the stiffness, toughness, and multifunctionality. The high-resolution transmission electron microscope (HR-TEM) and energy dispersive X-Ray spectroscopy (EDX) tests indicated that PBS copolymers possessed continuous “ionic cluster skeleton” and “PDMS skin”. The hybrid liquid state theory and self-consistent field approach for copolymers further demonstrated the mechanism of microphase separation for PDMS blocks and SIPM segments. The copolymers showed excellent yield strength of 52 MPa, great impact strength of 171 J/m, large extensibility of 491 %, and long functional period in the acidic environment. The novel stereo nanostructure endowed the materials with advanced multifunctions that can be applied in various applications, such as the biomedical field and flexible electronic devices. Compared with PBS, copolymers possessed excellent in vitro attachment and proliferation of MC3T3-E1 cells. Furthermore, the synergistic effect of the ionic skeleton and PDMS skin improved the ionic conductivity of the materials. The copolymer film was innovatively employed as anion-exchanging separators of supercapacitors with acid-organized electrolytes. It has been testified that this newly designed strategy of a novel stereo nanophase structure was efficient in endowing the biodegradable polyesters with excellent combined properties and multifunctions.

Preparation and characterization of crystalline poly(L‐lactic acid)/silica nanocomposite films with high ductility and gas barrier properties

AbstractIncorporating inorganic particles is a common approach to preparing polymeric materials with desirable physical properties and processability. However, this often results in increased brittleness, necessitating methods to improve melt strength and toughness. In this study, in situ polymerization was employed to functionalize silica nanoparticles with the silane coupling agent (3‐aminopropyl) triethoxysilane (APTES) as a core. A flexible chain segment, poly(butylene itaconate) (PBI), was then introduced as a “rubbery” intermediate layer, resulting in a core‐shell structure of poly(L‐lactic‐co‐butanediol itaconate) nano‐silica copolymer films (PLBISiO2) with both branched and “rubbery” structures. Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR) confirmed the formation of macromolecular chains, with the molecular weight (Mn) of PLBI increasing from 59,638 to 74,306 g/mol. This significant increase supports the “rubbery” core‐shell structure. When 0.5% SiO2 was added, the T5% of the film increased by 40°C, significantly improving thermal stability. Additionally, the elongation at break increased to 265.7%, while retaining the original tensile strength. Dynamic rheology experiments further confirmed the generation of branched or “rubbery” core‐shell structures, and a doubling of gas barrier properties was observed with increased silica nanoparticles, suggesting potential applications in food packaging or biopharmaceuticals.Highlights Nanocomposites with core‐shell structure and improved mechanical properties. Dynamic rheology experiments confirmed the formation of the core‐shell structure. Significantly improved gas barrier properties due to core‐shell structure.

Wound Closure Promotion by Leucine-Based Pseudo-Proteins: An In Vitro Study.

Our research explores leucine-based pseudo-proteins (LPPs) for advanced wound dressings, focusing on their effects on wound healing in an in vitro model. We assessed three types of LPP films for their ability to enhance wound closure rates and modulate cytokine production. They all significantly improved wound closure compared to traditional methods, with the 8L6 and copolymer films showing the most pronounced effects. Notably, the latter exhibited an optimal cytokine profile: an initial burst of pro-inflammatory TNF-α, followed by a controlled release of IL-6 during the proliferative phase and a significant increase in anti-inflammatory IL-10 during remodeling. This balanced cytokine response suggests that the copolymer film not only accelerates wound closure but also supports a well-regulated healing process, potentially reducing fibrosis and abnormal scarring, underscoring the potential of copolymer LPPs as advanced wound dressing materials. Future research will aim to elucidate the specific signaling pathways activated by the copolymer LPP to better understand its mechanism of action. Overall, LPP films offer a promising approach to improving wound care and could lead to more effective treatments for complex wounds.

Biodegradability of oxidized films of polyhydroxyalkanoate copolymers containing 2-hydroxy-4-methylthiobutyrate unit in seawater

Polyhydroxyalkanoate (PHA) copolymers consisting of 3-hydroxybutyrate, 2-hydroxy-4-methylthiobutyrate (2H4MTB), and 2-hydroxy-4-methylvalerate were biosynthesized by recombinant Escherichia coli using L-methionine as the 2H4MTB precursor. The 2H4MTB unit contains a sulfide group in its side chain that can be oxidized to sulfoxide and sulfone groups by oxidants, thereby increasing the hydrophilicity of the polymer. The PHAs were biosynthesized at 3.9, 9.2, and 13.9 mol% 2H4MTB, and their polymer films were oxidized with hydrogen peroxide. The surface of the oxidized film was characterized using Fourier-transform infrared spectroscopy, Raman spectroscopy, and contact angle analysis. The oxidized films with 13.9 mol% 2H4MTB showed a 30° lower water contact angle than the non-oxidized films. To assess their marine biodegradability, the PHA films were immersed for 114 days in seawater continuously pumped from two depths (24 and 397 m) in Suruga Bay, Shizuoka, Japan. The weight loss of the films immersed in deep seawater was higher than that of those immersed in surface seawater. Additionally, there was a tendency for higher degradation of the oxidized films than that of the non-oxidized films, which was also confirmed by the biochemical oxygen demand test. In the surface morphology analysis by scanning electron microscopy, irregularities were observed in the degraded films, but their morphologies differed between the oxidized and non-oxidized films. Based on these observations, the biodegradation of the PHA films in seawater is discussed.

Clicked into Place: Biomimetic Copolymer Adhesive for Covalent Conjugation of Functionalities.

Polydopamines (PDA) are a popular class of materials and promising candidates as adhesives for new fastening techniques. PDA layers can be formed on a wide range of substrates in various environments. Here, we present a novel method for functionalizing PDA-based copolymer films by using click chemistry. These copolymers adhere strongly to various surfaces and simultaneously have active groups that allow the attachment of functional groups. We discuss the coupling of two types of chitosan and a rhodamine B dye molecule to the alkyne groups of the copolymers by employing click reactions. Azidopropyl methacrylate (AzMA), methyl methacrylate (MMA), and dopamine methacrylamide (DOMA) are copolymerized and codeposited with (3-aminopropyl)triethoxysilane on silicon wafers, polyethylene (PE), and polytetrafluoroethylene (PTFE). AzMA provides the surfaces with azides for use in click reactions, MMA functions to control the polymer as a nonfunctional diluent, whereas DOMA provides adhesion, as well as cross-linking groups. After codeposition, the dyes are grafted to the copolymer to illustrate the ability of the films to link functional groups covalently. Fourier transform infrared spectroscopy confirms the successful click reaction in solution, and atomic force microscopy shows the surface morphologies following grafting. Fluorescence microscopy provides evidence of successful grafting. As an example of a possible application, layers exhibiting antifouling properties are prepared. Chitosan grafted to PE is tested for antifouling performance. These functionalized layers show nonspecific inhibition of protein adsorption. We find that chitosan can lower the adsorption of fluorescein-labeled bovine serum albumin (BSA) protein by more than 90% for the best performing fluorescein-labeled BSA protein and by more than 90% for the best-performing layer. These results demonstrate the viability of our PDA-based copolymers for surface functionalization through click chemistry grafting at challenging adhesion to surfaces.

Synthesis and characterization of stretchable isoprene-acrylic acid copolymer thin films

Copolymer thin films of isoprene with acrylic acid were synthesized using PECVD. In that way, the stretchable functionality of polyisoprene (PI) was combined with the hydrophilic functionality of poly(acrylic acid) (PAA) to obtain stretchable thin films with adjustable wettabilities. Deposition rates were found to change between 9 and 5.5 nm/min depending on the monomer flowrates. The analysis of water contact angle (WCA) values indicated that films having more AA units in their structures were more wettable. The stretchability of the films was assessed on laboratory gloves through stretch-release test and on PET sheet through bend-release test. No significant changes in the WCA values with no observable cracks and failures after successive tests were indication of stretchability of the copolymer films.

Role of Annealing with Electric Field Toward Improvement of Ferroelectric and Electroactive Properties of PVDF Copolymer and Terpolymer Thin Films.

The present study elucidates the role of annealing with electric field on lamellar crystalline structure and molecular orientation of polymer chains in ferroelectric copolymer (P(VDF-TrFE)) and ferroelectric terpolymer (P(VDF-TrFE-CFE)) spin-coated thin films. The ferroelectric polymer thin films annealed under an electric field support the growth of nanostructure with an "edge-on" lamellar crystalline structure having in-plane molecular chain orientation. The poled P(VDF-TrFE) thin films have higher remnant polarization (Pr) ≈6.2µCcm-2 and saturation polarization (Ps) ≈8.2µCcm-2 at an applied electric field of 250 MV/m compared to unpoled thin films having Pr ≈4.7 and Ps ≈6.2µCcm-2. Also, poled P(VDF-TrFE) thin films show lower coercive field (Ec) ≈94 MV/m compared to an unpoled thin film having Ec ≈105 MV/m. Similarly, poled PVDF-TrFE-CFE thin film shows better ferroelectric properties having Pr ≈0.4 and Ps ≈5.7µCcm-2 at an applied electric field of 200 MVm-1 compared to unpoled thin films having Pr ≈0.4 and Ps ≈4.1µCcm-2. The storage energy efficiency of unpoled and poled P(VDF-TrFE-CFE) thin films is measured to be ≈75% and 80%. Annealing of ferroelectric P(VDF-TrFE) polymer thin films under an electric field demonstrates improved ferroelectric and electroactive properties.

Mapping the Dynamics of Fluctuations and Defects in Confined Block Copolymer Films with High-Speed Atomic Force Microscopy

Mapping the Dynamics of Fluctuations and Defects in Confined Block Copolymer Films with High-Speed Atomic Force Microscopy

Stability Enhancement by Hydrophobic Anchoring and a Cross-Linked Structure of a Phospholipid Copolymer Film for Medical Devices.

Surface modification using zwitterionic 2-methacryloyloxyethylphosphorylcholine (MPC) polymers is one of the most reasonable ways to prepare medical devices that can suppress undesired biological reactions such as blood coagulation. Usable MPC polymers are hydrophilic and water soluble, and their surface modification strategy involves exploiting the copolymer structures by adding physical or chemical bonding moieties. In this study, we developed copolymers composed of MPC, hydrophobic anchoring moiety, and chemical cross-linking unit to clarify the role of hydrophobic interactions in achieving biocompatible and long-term stable coatings. The four kinds of MPC copolymers with cross-linking units, such as 3-methacryloxypropyl trimethoxysilane (MPTMSi), and four different hydrophobic anchoring moieties, such as 3-(methacryloyloxy)propyltris(trimethylsiloxy)silane (MPTSSi) named as PMMMSi, n-butyl methacrylate (BMA) as PMBSi, 2-ethylhexyl methacrylate (EHMA) as PMESi, and lauryl methacrylate as PMLSi, were synthesized and coated on polydimethylsiloxane, polypropylene (PP), and polymethyl pentene. These copolymers were uniformly coated on the substrate materials PP and poly(methyl pentene) (PMP), to achieve hydrophilic and electrically neutral coatings. The results of the antibiofouling test showed that PMBSi repelled the adsorption of fluorescence-labeled bovine serum albumin the most, whereas PMLSi repelled it the least. Notably, all four copolymers suppressed platelet adhesion similarly. The variations in protein adsorption quantities among the four copolymer coatings were attributed to their distinct swelling behaviors in aqueous environments. Further investigations, including 3D scanning force microscopy and neutron reflectivity measurements, revealed that the PMLSi coating exhibited a higher water intake under aqueous conditions in comparison to the other coatings. Consequently, all copolymer coatings effectively prevented the invasion of platelets but the proteins penetrated the PMLSi network. Subsequently, the dynamic stability required to induce shear stress was evaluated using a circulation system. The results demonstrated that the PMMMSi and PMLSi coatings on PMP and PP exhibited exceptional platelet repellency and maintained high stability during circulation. This study highlights the potential of hydrophobic moieties to improve hemocompatibility and stability, offering potential applications in medical devices.

Piezoelectric Enhancement in P(VDF-TrFE) Copolymer Films via Controlled and Template-Induced Epitaxy.

The surge in wearable electronics and Internet of Things technologies necessitates the development of both flexible sensors and a sustainable, efficient, and compact power source. The latter further challenges conventional batteries due to environmental pollution and compatibility issues. Addressing this gap, piezoelectric energy harvesters emerge as one kind of promising alternative to convert mechanical energy from ambient sources to electrical energy to charge those low-energy-consumption electronic devices. Despite slightly lower piezoelectric performance compared with those inorganic materials, piezoelectric polymers, notably poly(vinylidene fluoride-co-trifluoroethylene) P(VDF-TrFE), offer compelling properties for both flexible mechanical energy harvesting and self-powered strain/stress sensing, though their piezoelectric performance is expected to be further enhanced via varieties of modulation strategies of microstructures. Herein, we reported the controlled epitaxy process of micrometer-thick copolymer films with the cooperation of friction-transferred poly(tetrafluoroethylene) templates and precise modulation of the annealing conditions. Epitaxial P(VDF-TrFE) films present averaged d33 piezoelectric coefficient of -58.2 pC/N between 50 Hz and 1 kHz with good electromechanical and thermal stability. Owing to the nature of anisotropic crystallization, the epitaxial films exhibit an anisotropic transverse piezoelectric property. Epitaxial films were further utilized for mechanical energy harvesting and monitoring of human pulsation and respiration. This study provided a feasible route for the development of high-performance flexible piezoelectric devices to meet the requirement of flexible electronics.

Temperature-Sensitive Sensors Modified with Poly(N-isopropylacrylamide): Enhancing Performance through Tailored Thermoresponsiveness.

The development of temperature-sensitive sensors upgraded by poly(N-isopropylacrylamide) (PNIPAM) represents a significant stride in enhancing performance and tailoring thermoresponsiveness. In this study, an array of temperature-responsive electrochemical sensors modified with different PNIPAM-based copolymer films were fabricated via a "coating and grafting" two-step film-forming technique on screen-printed platinum electrodes (SPPEs). Chemical composition, grafting density, equilibrium swelling, surface wettability, surface morphology, amperometric response, cyclic voltammograms, and other properties were evaluated for the modified SPPEs, successively. The modified SPPEs exhibited significant changes in their properties depending on the preparation concentrations, but all the resulting sensors showed excellent stability and repeatability. The modified sensors demonstrated favorable sensitivity to hydrogen peroxide and L-ascorbic acid. Furthermore, notable temperature-induced variations in electrical signals were observed as the electrodes were subjected to temperature fluctuations above and below the lower critical solution temperature (LCST). The ability to reversibly respond to temperature variations, coupled with the tunability of PNIPAM's thermoresponsive properties, opens up new possibilities for the design of sensors that can adapt to changing environments and optimize their performance accordingly.