Ion Coordination Research Articles

Structure-Based Design of Novel Thiazolone[3,2-a]pyrimidine Derivatives as Potent RNase H Inhibitors for HIV Therapy.

Ribonuclease H (RNase H) was identified as an important target for HIV therapy. Currently, no RNase H inhibitors have reached clinical status. Herein, a series of novel thiazolone[3,2-a]pyrimidine-containing RNase H inhibitors were developed, based on the hit compound 10i, identified from screening our in-house compound library. Some of these derivatives exhibited low micromolar inhibitory activity. Among them, compound 12b was identified as the most potent inhibitor of RNase H (IC50 = 2.98 μM). The experiment of magnesium ion coordination was performed to verify that this ligand could coordinate with magnesium ions, indicating its binding ability to the catalytic site of RNase H. Docking studies revealed the main interactions of this ligand with RNase H. A quantitative structure activity relationship (QSAR) was also conducted to disclose several predictive mathematic models. A molecular dynamics simulation was also conducted to determine the stability of the complex. Taken together, thiazolone[3,2-a]pyrimidine can be regarded as a potential scaffold for the further development of RNase H inhibitors.

A Computational and Spectroscopic Analysis of Solvate Ionic Liquids Containing Anions with Long and Short Perfluorinated Alkyl Chains.

Anion-driven, nanoscale polar-apolar structural organization is investigated in a solvate ionic liquid (SIL) setting by comparing sulfonate-based anions with long and short perfluorinated alkyl chains. Representative SILs are created from 1,2-bis(2-methoxyethoxy)ethane ("triglyme" or "G3"), lithium nonafluoro-1-butanesulfonate, and lithium trifluoromethanesulfonate. Molecular dynamics simulations, density functional theory computations, and vibrational spectroscopy provide insight into the overall liquid structure, cation-solvent interactions, and cation-anion association. Significant competition between G3 and anions for cation-binding sites characterizes the G3-LiC4F9SO3 mixtures. Only 50% of coordinating G3 molecules form tetradentate complexes with Li+ in [(G3)1Li][C4F9SO3]. Moreover, the SIL is characterized by extensive amounts of ion pairing. Based on these observations, [(G3)1Li][C4F9SO3] is classified as a "poor" SIL, similar to the analogous [(G3)1Li][CF3SO3] system. Even though the comparable basicity of the CF3SO3- and C4F9SO3- anions leads to similar SIL classifications, the hydrophobic fluorobutyl groups support extensive apolar domain formation. These apolar moieties permeate throughout [(G3)1Li][C4F9SO3] and persist even at relatively low dilution ratios of [(G3)10Li][C4F9SO3]. By way of comparison, the CF3 group is far too short to sustain polar-apolar segregation. This demonstrates how chemically modifying the anions to include hydrophobic groups can impart unique nanoscale organization to a SIL. Moreover, tuning these nano-segregated fluorinated domains could, in principle, control the presence of dimensionally ordered states in these mixtures without changing the coordination of the lithium ions.

RING 4.0: faster residue interaction networks with novel interaction types across over 35,000 different chemical structures.

Residue interaction networks (RINs) are a valuable approach for representing contacts in protein structures. RINs have been widely used in various research areas, including the analysis of mutation effects, domain-domain communication, catalytic activity, and molecular dynamics simulations. The RING server is a powerful tool to calculate non-covalent molecular interactions based on geometrical parameters, providing high-quality and reliable results. Here, we introduce RING 4.0, which includes significant enhancements for identifying both covalent and non-covalent bonds in protein structures. It now encompasses seven different interaction types, with the addition of π-hydrogen, halogen bonds and metal ion coordination sites. The definitions of all available bond types have also been refined and RING can now process the complete PDB chemical component dictionary (over 35000 different molecules) which provides atom names and covalent connectivity information for all known ligands. Optimization of the software has improved execution time by an order of magnitude. The RING web server has been redesigned to provide a more engaging and interactive user experience, incorporating new visualization tools. Users can now visualize all types of interactions simultaneously in the structure viewer and network component. The web server, including extensive help and tutorials, is available from URL: https://ring.biocomputingup.it/.

Structural characteristics of alpha-fetoprotein, including N-glycosylation, metal ion and fatty acid binding sites

Alpha-fetoprotein (AFP), a serum glycoprotein, is expressed during embryonic development and the pathogenesis of liver cancer. It serves as a clinical tumor marker, function as a carcinogen, immune suppressor, and transport vehicle; but the detailed AFP structural information has not yet been reported. In this study, we used single-particle cryo-electron microscopy(cryo-EM) to analyze the structure of the recombinant AFP obtained a 3.31 Å cryo-EM structure and built an atomic model of AFP. We observed and identified certain structural features of AFP, including N-glycosylation at Asn251, four natural fatty acids bound to distinct domains, and the coordination of metal ions by residues His22, His264, His268, and Asp280. Furthermore, we compared the structural similarities and differences between AFP and human serum albumin. The elucidation of AFP’s structural characteristics not only contributes to a deeper understanding of its functional mechanisms, but also provides a structural basis for developing AFP-based drug vehicles.

An overview of Metal–Organic Frameworks as potential platform: Sensing for detection environmental pollutants and drug delivery applications

Metal Organic Frameworks (MOFs) represent a novel class of materials, characterized by their ability to form extended porous crystalline structures through the linkage of inorganic clusters or metallic ions with organic ligands. The availability of broad range of metal centres and type of organic linkers gives us opportunity for tailoring physical and chemical properties of MOFs. These modified MOFs opens up new channels for the customization of new devices needed for specific purposes. Though MOFs have been explored for significant applications in different sectors such as gas storage, proton conduction, biotechnological, biomedical sciences, catalysis, and separation, but drug delivery and the sensing applications has been taken exclusively at the manuscript. So, this article entails an overview of various synthetic methodology of low dimensional MOFs such as 1D and 2-D MOFs, and also focuses on their applications in sensing and drug delivery. This stems from their remarkable catalytic chemistry and their compatibility with a broad spectrum of materials. Furthermore, the 2-D layered structure of MOFs and their distinctive coordination of metal ions with organic ligands have emerging interest in the recent years.

Preorganization Effects on Eu(III) Ion Coordination by Dipyridyl-Phenanthroline Ligands: A Combined Experimental and Theoretical Analysis.

Although 1,10-phenanthroline has been proven to hold a strong complexing capacity for f-block elements and their derivatives have been applied in many fields, research on more highly or completely rigid phenanthroline ligands is still rare due to the challenging syntheses. Here, we reported three tetradentate ligands 2,9-di(pyridin-2-yl)-1,10-phenanthroline (L1), 12-(pyridin-2-yl)-5,6-dihydroquinolino[8,7b][1,10]phenanthroline (L2), and 5,6,11,12-tetrahydrobenzo[2,1-b:3,4-b']bis([1,10]phenanthroline) (L3) with increasing preorganization on the side chain; among which, L3 is fully preorganized. Their complexation reactions with Eu(III) were systematically investigated by electrospray ionization mass spectrometry (ESI-MS), UV-vis titrations, and single-crystal structures. It is found that all three ligands form only 1:1 M/L complexes with Eu(III). The single-crystal structures revealed that the three ligands hold similar coordination modes, while their stability constants determined by UV-vis titrations were L3 (4.80 ± 0.01) > L2 (4.38 ± 0.01) > L1 (3.88 ± 0.01). This trend is supported not only by the thermodynamic stability of rigid ligands compared to free ligands but also by the conclusion that rigid ligands exhibit faster reaction rates (lower energy barrier) than free ligands kinetically. This work is helpful in providing theoretical guidance for the subsequent development of highly preorganized chelating ligands with strong coordination ability and high selectivity for f-block elements.

Carbon Dot-Stabilized Hydrogel Composite: A New Adsorbent for Efficient and Sustainable Pb(II) Removal.

In this paper, a carbon dot hydrogel composite (CDs-Hy) capable of efficiently removing Pb(II) was prepared by hydrogen bonding self-assembly in combination with carbon dots and a hydrogel. CDs-Hy was characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS), and the effect of the adsorption conditions on the adsorption efficiency of CDs-Hy was studied. The results of the study showed that the incorporation of carbon dots, on the one hand, significantly increased the adsorption capacity of the material. On the other hand, it can increase the stability of hydrogels in aqueous solution. The possible adsorption mechanisms were further verified as ion exchange and coordination. CDs-Hy is a novel adsorbent material capable of removing Pb2+ efficiently, which can be reused several times with high stability.

Endogenous Calcium-Supported dynamic Copper(II)-Crosslinked Gel depot for in situ disulfiram activation and synergistic cancer therapy

The development of smart therapeutic scaffolds to improve chemotherapeutic efficacy and enhance antitumor immunity remains a considerable challenge. In this study, we engineered a therapeutic copper ion-crosslinked gel depot based on alginate to enhance disulfiram (DSF)-mediated cancer chemoimmunotherapy. This gel depot maintained structural stability through ion coordination exchange with the calcium ions in body fluids and continuously created an antitumor diethyldithiocarbamate-copper complex (CuET), which led to the sustained release of various therapeutic agents in vivo. The generated CuET not only had a direct antitumor effect due to its cytotoxicity but also effectively induced the immunogenic death of cancer cells. These factors coregulated the immunosuppressed tumor microenvironment with the released DSF, thus sensitizing the systemic immune response and improving the efficacy of anti-programmed cell death-ligand 1 antibody (aPD-L1)-mediated immune checkpoint blockade. The results indicated that this endogenous calcium-supported therapeutic copper(II)-crosslinked gel depot could effectively improve the tumor immune microenvironment, leading to enhanced synergistic antitumor efficacy in vivo.

Ceramization of coordinated Zr4+ and Hf4+ in polysiloxane conferring silicone/phenolic hybrid resin with excellent thermal protection

Silicon/phenolic hybrid resins are one of the most commonly used materials for thermal protection. However, the weak ability of SiO2 generated by silicone during ablation to resist the impact of high-speed hot gas flow hinders further improvement of the performance. Therefore, in this work, the ultrahigh-temperature ceramic elements Zr4+ and Hf4+ were integrated into hyperbranched polysiloxanes in the form of coordination bond and then introduced into phenolic resin (PR), obtaining hybrid resin with excellent ablative resistance. During ablation, Zr4+ and Hf4+ will first undergo ceramization, producing ZrO2 and HfO2. Subsequently, they will undergo a solid solution sintering reaction to produce complex-phase ceramic particles (ZrxHf1-x)O2, which are embedded in the SiO2 liquid film and provide excellent pinning effect. This gives the hybrid resin excellent ablation resistance, whose linear ablation rate can be as low as 0.038 mm/s, a 58 % decrease compared to pure PR. This work not only provides a new pathway for ceramization through metal ion coordination bonding, but also provides a new way to prepare high-performance TPS materials.

Histidine–cysteine–copper hybrid nanoflowers as active site-inspired laccase mimics for the colorimetric detection of phenolic compounds in PDMS microfluidic devices

Although laccases are essential multicopper oxidases in biosensing and bioremediation, their widespread use is hindered by issues such as instability and high cost. In this study, drawing inspiration from the active site structure of laccase, we developed hybrid nanoflowers through the coordination of copper ions with histidine-cysteine dipeptides (HC–Cu NFs) as highly robust laccase-mimicking nanozymes. The HC–Cu NFs possessed higher laccase-like activity compared to free laccase, yielding an approximately five-fold higher Vmax with a similar Km at the same mass concentration. Additionally, HC–Cu NFs exhibited exceptional stability across diverse environments, including a broad range of pH, temperature, salinity, and extended storage periods. Notably, HC-Cu NFs catalyzed the decolorization of phenolic dyes more rapidly than natural laccase. Utilizing these beneficial features, HC–Cu NFs were incorporated in a polydimethylsiloxane-based microfluidic device, enabling the on-site colorimetric determination of phenolic compounds, such as p-aminophenol, catechol, and hydroquinone, with outstanding sensitivity. By injecting only 20 μL of the sample solution through the inlet of the device, the sample solution rapidly moves to the detection zones where the HC-Cu NFs are retained, followed by catalytic oxidation to further react with 4-aminoantipyrine to produce a colored adduct. Using the microfluidic device, the target phenolic compounds were successfully determined within 20 min at ambient conditions using an image acquired with a smartphone with the ImageJ software. This study unequivocally demonstrates that active site-mimicking dipeptide-incorporated hybrid nanoflowers have the potential to serve as nanozymes, to replace natural laccase. This lays the groundwork for the further advancement of hybrid nanoflower-type nanozymes and their applications, particularly in point-of-care testing environments.

Redox Behavior and Kinetics of Hydroxo Ligand Exchange on Iron Tetraphenylporphyrin: Comparison with Chloro Exchange and Consequences for Its Role in Self-Modulation of Molecular Catalysis of Electrochemical Reactions.

Thermodynamics and kinetics of hydroxide ion binding to iron tetraphenylporphyrin (TPPFe) at different redox states is investigated by electrochemistry and UV-vis spectroscopy. The reduction of initial TPPFe(III) drastically decreases the binding affinity of hydroxide ions. An activation-driving force correlation is revealed showing that the strongest the binding affinity, the largest the association rate constant and vice versa. Comparison with chloride ions shows that hydroxide ions are stronger ligands for iron tetraphenylporphyrin. However, kinetic data indicate that coordination and decoordination of chloride ions is intrinsically faster than coordination and decoordination of hydroxide ions. Finally, the consequence of hydroxide ion binding dynamics when TPPFe is used as a molecular catalyst for electrochemical reactions liberating hydroxides is discussed in the framework of self-modulation of catalytic processes.

Shutters-Inspired metal ions coordination hydrogel Strain/Pressure sensor for joint behavior evaluation and flatfeet correction

The metal ions coordination hydrogels (MI-HG) that polymer gels serve as flexible substrates and metal ions as conductive media have emerged as flexible electronic sensor materials. Nevertheless, fabricating MI-HG by a traditional soaking method is difficult to guarantee the good permeation of metal ions, manifesting as the “core–shell” structure of MI-HG, which undoubtedly reduces their mechanical property, conductivity, and sensitivity. Inspired by the shutter opening and closing regulation mechanism, a strategy that completely opening the backbone layers of polymer gels facilitates metal ions permeation thus improving the whole performance of MI-HG, especially the mechanical property is proposed. Herein, poly(vinyl alcohol)(poly(acrylic acid)-polyacrylamide) (PVA(PAA-PAM)) is used as the typical polymer hydrogel (HG), trivalent aluminum ion (Al3+) as the metal salt, and N,N'-methylenebisacrylamide (MBAA) as the important regulation ‘rod’, fabricating a series of aluminum coordination hydrogels (Al-HGx%). The results indicate that the mechanical performances of Al-HG2% are significantly improved. For example, the toughness of Al-HG2% reaches 996.12 KJ/m3, approximately three times that of the Al-HG0% sample (354.45 KJ/m3). The combination of structural characterization as well as finite element analysis, the mechanism for the enhanced mechanical performances based on shutter’s completely open effect is elucidated, the product of which (Al-HG2%) has potential application in flexible strain/pressure sensor for joint behavior evaluation and flatfeet correction.

Inhibiting Photo-Oxidation and Enhancing Visible-Light-Driven Photocatalytic Water Oxidation over Covalent Organic Frameworks Through the Coordination of Cobalt with Bipyridine.

Photocatalytic water splitting using covalent organic frameworks (COFs) is a promising approach for harnessing solar energy. However, challenges such as slow kinetic dynamics in the photocatalytic oxygen evolution reaction (OER) and COFs' self-oxidation hinder its progress. In this study, an enamine-based COF coordinated is introduced with cobalt dichloride, CoCl2 (CoCl2-TpBPy). The coordination of cobalt ions with bipyridines in CoCl2-TpBPy enhances charge-carrier separation and migration, leading to effective photocatalytic OER. Under visible light irradiation, CoCl2-TpBPy achieves a notable OER rate of up to 1 mmol·g-1·h-1, surpassing the reported organic semiconductor analogs. Additionally, CoCl2-TpBPy shows minimal nitrogen evolution compared to TpBPy and ethanol-treated TpBPy (E-TpBPy), indicating cobalt plays a pivotal role in improving charge utilization and minimizing photo-oxidation. In situ X-ray photoelectron spectroscopy (XPS) and electron paramagnetic resonance (EPR) analyses revealed that Co(IV) species are key to the high OER efficiency. This work highlights Co(IV) species in the efficient OER and inhibiting photo-oxidation of CoCl2-TpBPy.

Theoretical Study on The Effect of Metal Ions on The Structural Properties of Base

Metal ions play an important role in living organisms, for example Mg2+ is a cofactor for many biological enzymes (including DNA and RNA synthesis), Ca2+ is an important component of bone composition, and metal ions such as Fe, Co, Zn, Ni and Cu also play an important role in the normal functioning of living organisms. One of the main targets of metal ions in living organisms is deoxyribonucleic acid (DNA), which is an important carrier of information stored and transmitted by organisms. The direct interaction between DNA base pairs and metal ions have a significant impact on the structure and function of DNA base pairs, which is demonstrated as following: the binding of metals to bases usually breaks the hydrogen bonds of the base pairs. The N7 atom of a purine residue or the N3 atom of a pyrimidine residue, as well as the outer ring O atom and the phosphate oxygen atom, are the preferred sites for metal binding. The binding of metals to DNA and RNA also indirectly affects the conformation of the sugar ring. REDOX active metal ions have the ability to bind to DNA and can mediate oxidative DNA damage by reacting with endogenous oxidants. According to studies of antioxidants in the field of metal-mediated oxidative DNA damage, metal ion coordination also plays a key role in the mechanism of some antioxidants. Also, metal-DNA interactions are the basis for many anti-cancer drugs, anti-viral drugs and anti-bacterial agents. Metal-mediated oxidative DNA damage is associated with a variety of diseases and conditions, and understanding the binding interactions and subsequent reactivity can facilitate the management or prevention of oxidative damage. It can be seen that the study of the effect of metal ions on the structural properties of DNA bases has far-reaching implications, providing a theoretical basis for the development of novel anticancer drugs, DNA-based metal nanodevice technologies and the fabrication of spectroscopic and reactive probes.

Effect of compression temperature on the structure and properties of hot compressed sodium borosilicate glasses from molecular dynamics simulations

Applying pressure during glass formation or annealing is an effective method to modify the properties of oxide glasses. The effect of compression temperature on the structure and properties of a sodium borosilicate glass has been investigated using molecular dynamics simulations. The connection between macroscopic properties (density and elastic moduli) and microscopic structures (short- and medium-range order) was investigated. Young’s modulus increased with the compression temperature and then reached a plateau at temperatures close to the glass transition temperature. The modulus increase was found to correlate linearly with glass density change. Correlations with structural changes, such as fraction of four-fold coordinated boron, oxygen triclusters, sodium ion coordination number and the Na–O and Na–Na distances were studied. The results suggest that the pressure-induced transformation from three-fold to four-fold coordinated boron was achieved through the formation of oxygen triclusters, which is different from the commonly observed mechanism involving nonbridging oxygen during the boron coordination change. In addition, the linear correlation between sodium coordination number and glass density suggests that change of sodium ion local environment and redistribution of sodium ions also play an important role in the property behaviour during pressure quenching of the glasses.

Tuning Surface, Phase, and Magnetization of Superparamagnetic Magnetite by Ionic Liquids: Single-Step Microwave-Assisted Synthesis.

Achieving colloidal and chemical stability in ferrofluids by surface modification requires multiple steps, including purification, ex situ modification steps, and operation at high temperatures. In this study, a single-step microwave-assisted methodology is developed for iron oxide nanoparticle (IONP) synthesis utilizing a series of imidazolium-based ionic liquids (ILs) with chloride, bis(trifluoromethylsulfonyl)imide, and pyrrolide anions as the reaction media, thus eliminating the use of volatile organics while enabling rapid synthesis at 80 °C as well as in situ surface functionalization. The characterized surface functionality, hydrodynamic particle size, magnetization, and colloidal stability of the IONPs demonstrate a strong dependence on the IL structure, ion coordination strength, reactivity, and hydrophilicity. The IONPs present primarily a magnetite (Fe3O4) phase with superparamagnetism with the highest saturation magnetization at 81 and 73 emu/g at 10 and 300 K, respectively. Depending on the IL coating, magnetization and exchange anisotropy decrease by 20 and 2-3 emu/g (at 35 wt % IL), respectively, but still represent the highest magnetization achieved for coated IONPs by a coprecipitation method. Further, the surface-functionalized superparamagnetic magnetite nanoparticles show good dispersibility and colloidal stability in water and dimethyl sulfoxide at 0.1 mg/mL concentration over the examined 3 month period. This study reports on the intermolecular and chemical interactions between the particle surface and the ILs under synthetic conditions as they relate to the magnetic and thermal properties of the resulting IONPs that are well suited for a variety of applications, including separation and catalysis.

Weakening Ionic Coordination for High Ionic Conductivity Composite Solid Electrolytes

Weakening Ionic Coordination for High Ionic Conductivity Composite Solid Electrolytes

Degradable, anti-swelling, high-strength cellulosic hydrogels via salting-out and ionic coordination

Cellulosic hydrogels are widely used in various applications, as they are natural raw materials and have excellent degradability. However, their poor mechanical properties restrict their practical application. This study presents a facile approach for fabricating cellulosic hydrogels with high strength by synergistically utilizing salting-out and ionic coordination, thereby inducing the collapse and aggregation of cellulose chains to form a cross-linked network structure. Cellulosic hydrogels are prepared by soaking cellulose in an Al2(SO4)3 solution, which is both strong (compressive strength of up to 16.99 MPa) and tough (compressive toughness of up to 2.86 MJ/m3). The prepared cellulosic hydrogels exhibit resistance to swelling in different solutions and good biodegradability in soil. The cellulosic hydrogels are incorporated into strain sensors for human-motion monitoring by introducing AgNWs. Thus, the study offers a promising, simple, and scalable approach for preparing strong, degradable, and anti-swelling hydrogels using common biomass resources with considerable potential for various applications.

Potentiating Activity of GmhA Inhibitors on Gram-Negative Bacteria.

Inhibition of the biosynthesis of bacterial heptoses opens novel perspectives for antimicrobial therapies. The enzyme GmhA responsible for the first committed biosynthetic step catalyzes the conversion of sedoheptulose 7-phosphate into d-glycero-d-manno-heptose 7-phosphate and harbors a Zn2+ ion in the active site. A series of phosphoryl- and phosphonyl-substituted derivatives featuring a hydroxamate moiety were designed and prepared from suitably protected ribose or hexose derivatives. High-resolution crystal structures of GmhA complexed to two N-formyl hydroxamate inhibitors confirmed the binding interactions to a central Zn2+ ion coordination site. Some of these compounds were found to be nanomolar inhibitors of GmhA. While devoid of HepG2 cytotoxicity and antibacterial activity of their own, they demonstrated in vitro lipopolysaccharide heptosylation inhibition in Enterobacteriaceae as well as the potentiation of erythromycin and rifampicin in a wild-type Escherichia coli strain. These inhibitors pave the way for a novel treatment of Gram-negative infections.

Poly(vinyl benzoate)-b-poly(diallyldimethyl ammonium TFSI)-b-poly(vinyl benzoate) Triblock Copolymer Electrolytes for Sodium Batteries

Block copolymers (BCPs) as solid electrolytes for batteries are usually designed to have an ion-solvating block for ion conduction and an ionophobic block for providing mechanical strength. Here, we show a novel solid polymer electrolyte (SPE) for sodium batteries based on a poly(vinyl benzoate)-b-poly(diallyldimethyl ammonium bis(trifluoromethanesulfonyl)imide) PVBx-b-PDADMATFSIy-b-PVBx ABA triblock copolymer. The SPE triblock copolymer comprises a polymerized ionic liquid (PIL) ion-solvating block combined with NaFSI salt as an internal block and an ionophilic PVB as an external block. Four distinct compositions with varying chain lengths of the blocks were synthesized by reversible addition−fragmentation chain-transfer (RAFT) polymerization. The neat copolymers were subsequently mixed with NaFSI in a 2:1 mol ratio of Na to ionic monomer units. Through comprehensive analysis using differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FTIR), and nuclear magnetic resonance (NMR), it was revealed that the ion coordination within the polymer–salt mixtures undergoes changes based on the composition of the starting neat polymer. Electrochemical evaluations identified the optimal composition for practical application as PVB11.5K-b-PDADMATFSI33K-b-PVB11.5K, showing an ionic conductivity at 70 °C of 4.2 × 10−5 S cm−1. This polymer electrolyte formulation was investigated for sodium in Na|Na symmetrical cells, showing an overpotential of 200 mV at 70 °C at 0.1 mA cm−2. When applied in a sodium–air battery, the polymer electrolyte membrane achieved a discharge capacity of 1.59 mAh cm−2 at 50 °C.