Conversion Rate Research Articles

Precisely Tuning Band Gaps of Hexabenzocoronene-Based MOFs Toward Enhanced Photocatalysis.

Precise adjusting the band gaps in metal-organic frameworks (MOFs) is crucial for improving their visible-light absorption capacity during photocatalysis, presenting both a formidable challenge and a charming opportunity. This present study employed a symmetry-reduction strategy to pre-design six novel 4-connected ligands with systematic substituents (-NO2, -H, -tBu, -OCH3, -OH and -NH2) and synthesized the corresponding pillared-layer Zr-MOFs (NKM-668) retaining the hexaphenylbenzene fragment. Subsequently, the NKM-668 MOFs were transformed into large-π-conjugated hexabenzocoronene-based MOFs (pNKM-668) via the Scholl reaction. These twelve MOFs exhibited broad and tunable band gaps over 1.41 eV (ranging from 3.25 eV to 1.84 eV), and the photocatalytic CO2 conversion rate raised by 33.2-fold. This study not only enriches the type of hexaphenylbenzene-based MOFs, but also paves the way for nanographene-containing MOFs in the further application of photocatalysis.

An analysis regarding the ultimate outcome of abstracts presented at the European Paediatric Surgeons' Association (EUPSA) Congresses.

The objective of this study is to analyze the conversion rate of abstracts presented at the European Paediatric Surgeons' Association (EUPSA) congress into full-text publications and to conduct a thorough analysis of the attributes and quality of the papers published. Abstract books including the years 2017 to 2022 were reviewed. Searches on PubMed and Google Scholar, utilizing keywords from the titles and the author names, were conducted to trace subsequent full-text publications. A categorical analysis detected variations and trends, with a significance threshold of P < 0.05. Quantitative data were presented as means ± standard deviations (SD), while categorical data were represented as counts (n) and percentages (%). A total of 2,139 abstracts were presented at the EUPSA annual meetings during five consecutive congresses. The average number of presented abstracts was 427.6 ± 20.4 per year from across 63 different countries. European countries contributed the majority (71%). The presentations included both oral (n=817, 38.2%) and poster presentations (n=1322, 61.8%). They predominantly focused on clinical topics (90.6%). Single-center retrospective studies were the most common study design (43.7%). Out of all abstracts presented, 1033 (48.3%) were published within an average time interval of 1.39 ± 1.19 years after presentation. Most journals had an impact factor (IF) between 1 and 5 (74.5%). There was no significant year-to-year variation in publication rates (p=1). Basic science studies were published in journals with significantly higher IF compared to clinical studies (p<0.001). The publication rate of abstracts presented at the EUPSA annual congress stands at 48.3%, aligning with the rates observed in other similar studies. This suggests that abstracts submitted to the EUPSA congresses were evaluated and scored rigorously, adhering to international selection criteria. Furthermore, the majority of these abstracts were published in journals with moderate to high impact factors, providing quantitative evidence of the scientific quality of research within the field of pediatric surgery.

Optical analysis of transesterification reaction assisted by ultrasound

Ultrasound can be used during the biodiesel production reaction, aiming to increase the efficiency of the reaction, as well as reduce the catalyst and alcohol content, facilitating the purification process and minimizing environmental impacts in the production of this biofuel. This work evaluated by optical means the influence of the use of ultrasound on the reaction dynamics of transesterification under different catalyst contents. Tests were conducted using a Langevin-type transducer (40 kHz x 20.5 W) to convert 270 mL of soybean oil per batch. Previous tests in the reactor used showed intense cavitation activity resulting in mass loss of up to 27.3% in erosion tests on aluminum foil. Optical transmittance and ester content evaluation analyzes of the samples showed that ultrasound was able to increase the conversion rate and reduce the optical stabilization time (up to 9.9%), suggesting a shorter reaction time, especially for lower ester contents. catalyst.

Computer-Aided Flexible Loops Engineering of Glutamate Dehydrogenase for Asymmetric Synthesis of Chiral Pesticides l-phosphinothricin.

The access to the enantiopure noncanonical amino acid l-phosphinothricin (l-PPT) by applying biocatalysts is highly appealing in organic chemistry. In this study, a NADH-dependent glutamate dehydrogenase from Lachnospiraceae bacterium (LbGluDH) was chosen for the asymmetric synthesis of l-PPT. Three flexible loops undergoing big conformational shifts during the catalysis were identified and rationally engineered following the initial mutagenesis. The enzyme's specific activity toward the key precursor of l-PPT, 2-oxo-4-[(hydroxy) (methyl) phosphinyl] butyric acid (PPO), was improved from negligible to 9 U/mg, and the Km value was reduced to 17 mM. The computational analysis showed that the modified loops broadened the enzyme's narrow tunnels, allowing the substrate to access the binding pocket and get closer to the crucial residue D165, thereby enhancing the catalytic process. Utilizing the variant as the catalyst, the preparation of l-PPT achieved a 100% conversion rate within 60 min, coupled with a stereoselectivity exceeding 99.9%, demonstrating its practical capacity for industrial application. Similar enhancement in catalytic activity was obtained applying the same strategy to a typical NADH-dependent GluDH from Pyrobaculum islandicum (PisGluDH), indicating the effectiveness of our strategy for the protein engineering of GluDHs targeted to the biosynthesis of unnatural compounds.

Robotic Versus Laparoscopic Versus Open Surgery for Non-Metastatic Pancreatic Neuroendocrine Tumors (pNETs): A Systematic Review and Network Meta-Analysis.

Background: This systematic review, using pairwise and network meta-analyses, aimed to compare the intraoperative, short-term, and long-term postoperative outcomes of minimally invasive surgery (MIS) and open surgery (OS) for the management of pancreatic neuroendocrine tumors (pNETs). Methods: Studies reporting on the effects of robotic, laparoscopic, and open surgery on pNETs published before November 2023 on PubMed, Scopus, and CENTRAL were analyzed. Results: Thirty-two studies with 5379 patients were included in this review, encompassing 2251 patients undergoing MIS (1334 laparoscopic, 508 robotic, and 409 unspecified MIS) and 3128 patients undergoing OS for pNETs management. Pairwise meta-analysis revealed that the MIS group had a significantly shorter length of hospital stay ((a low certainty of evidence), MD of -4.87 (-6.19 to -3.56)); less intraoperative blood loss ((a low certainty of evidence), MD of -108.47 (-177.47 to -39.47)); and decreased tumor recurrence ((a high certainty of evidence), RR of 0.46, 95% CI (0.33 to 0.63)). Subgroup analysis indicated a higher R0 resection rate and prolonged operative time for laparoscopic surgery than for OS. The network meta-analysis ranked the robotic approach as superior in terms of the length of hospital stay, followed by the laparoscopic and OS arms. Furthermore, it favored both MIS approaches over OS in terms of the R0 resection rate. No significant differences were found in severe postoperative complications, postoperative fistula formation, mortality, readmission, reoperation, or conversion rates. Conclusions: This review supports the safety of MIS for the treatment of pNETs. However, the varying certainty of evidence emphasizes the need for higher-quality studies.

Association of Neurogranin and BACE1 With Clinical Cognitive Decline in Individuals With Subjective Cognitive Decline.

CSF biomarkers have immense diagnostic and prognostic potential for Alzheimer disease (AD). However, AD is still diagnosed relatively late in the disease process, sometimes even years after the initial manifestation of cognitive symptoms. Thus, further identification of biomarkers is required to detect related pathology in the preclinical stage and predict cognitive decline. Our study aimed to assess the association of neurogranin and β-site amyloid precursor protein-cleaving enzyme 1 (BACE1) with cognitive decline in individuals with subjective cognitive decline (SCD). We enrolled participants with available neurogranin and BACE1 measurements in CSF from the DELCODE (DZNE-Longitudinal Cognitive Impairment and Dementia, Germany) cohort. The longitudinal change of Preclinical Alzheimer's Cognitive Composite score was assessed as the primary outcome in participants with SCD and controls. The secondary outcome was defined as conversion of SCD to mild cognitive impairment (MCI) during follow-up. Levels of neurogranin, BACE1, and neurogranin/BACE1 ratio across groups were compared by analysis of covariance after adjustment for demographics. The linear mixed-effects model and Cox regression analysis were applied to evaluate their association with cognitive decline and progression of SCD to MCI, respectively. A total of 530 participants (mean age: 70.76 ± 6.01 years, 48.7% female) were analyzed in the study. The rate of cognitive decline was faster in individuals with SCD with higher neurogranin and neurogranin/BACE1 ratio (β = -0.138, SE = 0.065, p = 0.037, and β = -0.293, SE = 0.115, p = 0.013). Higher baseline neurogranin and neurogranin/BACE1 ratio were associated with an increased rate of conversion from SCD to MCI (hazard ratio [HR] 1.35 per SD, 95% CI 1.03-1.77, p = 0.028, and HR 1.53 per SD, 95% CI 1.13-2.07, p = 0.007). In addition, the impact of higher neurogranin levels on accelerating the rate of cognitive decline was more pronounced in the SCD group than in cognitively unimpaired controls (β = -0.077, SE = 0.033, p = 0.020). Our findings suggest that CSF neurogranin and BACE1 begin to change in the preclinical stage of AD and they are associated with clinical progression in individuals with SCD.

Development and performance evaluation of a novel solar mid-and-low temperature receiver/reactor with packed metal foam

Solar-driven hydrogen production from methanol decomposition (MD) is an important method of storing solar energy as clean fuels and improving the solar energy utilization efficiency. Catalyst preparation is one of the key steps, but conventional Cu-ZnO-Al2O3 particle catalysts lead to uneven reactor temperature, reducing the efficient conversion of solar energy into fuels. To alleviate this challenge, a monolithic catalyst utilizing packed foamy copper as a carrier is developed with exceptional thermal and mass transfer properties. The experimental results validate its excellent performance in hydrogen production using MD. The absolute conversion increases by an average of 12.11 % at 250 °C and further by 14.43 % at 270 °C compared to the particle catalyst. Based on these findings, a novel solar reactor is proposed, and a multi-field coupling model is built. The comparative results verify the performance advantage of the developed solar thermochemical receiver/reactor with packed metal foam-based catalyst. It maintains high conversion rates and solar-to-fuel energy efficiency, while alleviating overheating problems caused by traditional particle catalysts. Under the design conditions, the new reactor significantly improves the absolute conversion of methanol and the energy efficiency of solar-to-fuel conversion by 4.57 % and 3.00 %, respectively, resulting in 92.64 % and 67.56 %. This study provides a theoretical basis and technical solution for more stable and efficient use of mid-and-low temperature solar energy.

Improved catalytic stability of immobilized Candida antarctica lipase B on macroporous resin with organic polymer coating for biodiesel production.

Lipase is one of the most widely studied and applied biocatalysts. Due to the high enzyme leakage rate of the immobilization method of physical adsorption, we propose a new lipase immobilization method, based on the combination of macroporous resin adsorption and organic polymer coating. The immobilized Candida antarctica lipase B (CALB@resin-CAB) was prepared by combining the macroporous resin adsorption with cellulose acetate butyrate coating, and its structure was characterized by various analytic methods. Immobilized lipase was applied for biodiesel production using acidified palm oil as the starting material, the conversion rate achieved as high as 98.5% in two steps. Furthermore, the immobilized lipase displayed satisfactory stability and reusability in biodiesel production. When the aforementioned reaction was carried out in a continuous flow packed bed system, the yield of biodiesel was 94.8% and space-time yield was 2.88g/(mL∙h). The immobilized lipase CALB@resin-CAB showed high catalytic activity and stability, which has good potential for industrial application in the field of oil processing.

Outcomes after revisional surgery for paraesophageal hernias at a high-volume tertiary care center.

Although recurrences after repair of giant paraesophageal hernias (PEH) are common, revisional procedures are challenging and associated with higher complication rates than primary repair. Therefore, repair of recurrent PEH is often avoided except in symptomatic patients. Data describing operative outcomes in these infrequent cases is lacking. Therefore, this study aimed to report and compare peri-operative outcomes of revisional PEH repair to similar patients undergoing primary surgery. A single-institution, retrospective cohort study was conducted on all adult patients undergoing primary repair of Type II-IV PEH and any revisional surgery for recurrent hiatal hernia after previous primary PEH repair (2012-2019). Patient and operative characteristics and post-operative outcomes were extracted from medical records. Patients were grouped into revisional (rPEH) and primary repair (pPEH). Coarsened exact matching was performed to create balanced cohorts. A total of 347 cases were identified. The matched cohort included 234 patients (rPEH: 46, pPEH: 188). Patient sex and comorbidities were well balanced, while those who underwent revisions were younger (64 ± 13 vs. 69 ± 11years; p = 0.01). Median time between primary and rPEH was 40[17-121] months. Incidence of emergency repair were similar among groups (rPEH: 9(15%), pPEH: 14(8%); p = 0.10). All revisional cases commenced laparoscopically with 7(15%) requiring conversion to open. The conversion rate was higher for rPEH than primary surgery (7(15%) vs. 3(2%); p < 0.01), with the most common reasons being adhesions and gastric fundus injury. Intra-operative complications occurred in 12(26%) revisional cases, of which 58% were gastric fundus injuries. Median length of stay was longer for rPEH than pPEH (2[1-5] vs. 1[1-2] day; p = 0.02). Incidence of severe complications (rPEH: 5(11%), pPEH: 11(6%); p = 0.23) and reoperations (rPEH: 2(4%), pPEH: 7(4%); p = 0.84) were similar between groups. There were no peri-operative deaths. In a high-volume tertiary care center, repair of recurrent giant paraesophageal hernias can be performed successfully laparoscopically in the majority of cases with acceptable morbidity and peri-operative outcomes in comparison to primary surgery.

Boosting SO2-tolerance of Mn-doped CeO2-ZrO2 for Hg catalytic oxidation via NaOH etching

Manganese-doped CeO2-ZrO2 solid solution (CZM) is a prominent sorbent for extracting Hg0 from flue gas, operating optimally around 150 °C, but impaired by SO2 exposure. In this research, we apply a hydrothermal method, employing a sodium hydroxide (NaOH) solution, to enhance CZM's SO2 resilience. The detrimental effect of SO2 on CZM primarily arises from the reduction of active oxygen species, diminishing Hg0 removal efficacy. After conducting a 10-hour test in the atmosphere comprising N2, 6 %O2, and 500ppmSO2, the mercury removal efficiency of the unmodified CZM significantly decreased from ∼99.5 % to ∼26.0 %. Conversely, the modified sorbents, designated as CZM-1M, demontrasted enhanced stability, with its mercury removal efficiency modestly reducing from ∼97 % to ∼60 %. We then conducted comprehensive characterizations of both sorbents to understand the mechanism behind this improved SO2 tolerance. In CZM-1M, we noted an enhanced conversion rate from Ce4+ to Ce3+, a key factor in boosting the production of active oxygen species, necessary for Hg0 oxidation. Additionally, the formation of SO3 - a result of the interaction between the abundant oxygen species and SO2 - emerged as a novel active site that further promoted Hg0 oxidation. This shift in active site offers a pathway for enhancing SO2 resistance in such material.

Kinetic Characterization of Pt/Al2O3 Catalyst for Hydrogen Production via Methanol Aqueous-Phase Reforming

Compared to steam reforming, methanol aqueous-phase reforming (APR) converts methanol to hydrogen and carbon dioxide at lower temperatures, but also displays lower conversion rates. Herein, methanol APR is studied over the active Pt/Al2O3 catalyst under different operating conditions. Studies were conducted at different temperatures, pressures, methanol mass fractions, and residence times. APR performance was evaluated in terms of methanol conversion, hydrogen production rate, hydrogen selectivity, and by-product formation. The results revealed that an increase in operating pressure and methanol mass fraction had an adverse effect on the APR performance. Conversely, it was found that hydrogen selectivity was unaffected by the operating pressure and residence time for the methanol feed mass fraction of 5%. For the methanol feed mass fraction of 55%, hydrogen selectivity was improved by operating pressure and residence time. The alumina support phase change to boehmite as well as sintering and leaching of the catalytic particles were observed during catalyst stability experiments. Additionally, a comparison between methanol steam reforming (MSR) and APR was also performed.

The presence of oligoclonal bands predicts conversion to multiple sclerosis in isolated myelitis

Acute transverse myelitis (ATM) is a disease characterized by inflammation of the spinal cord and may have various causes. In the context of this work, the distinction between isolated ATM and initial manifestation of autoimmune-mediated diseases of the central nervous system such as multiple sclerosis (MS) is crucial. Hence, the aim of this work was to identify predictive factors associated with the conversion to definite MS in a collective of individuals after their initial episode of isolated ATM (no initial identified cause). In this retrospective data analysis from the Vienna MS Database, all patients from Jan. 1, 1999, to Dec. 31, 2019, with a diagnosis of isolated ATM (according to the criteria of the Transverse Myelitis Consortium Working Group) who underwent lumbar puncture were extracted. Electronic medical records were reviewed on the availability of clinical data including therapy and follow-up, laboratory results including cerebrospinal fluid (CSF) analysis, evoked potentials (EP) as well as magnetic resonance imaging data. Among 42 patients with the diagnosis of isolated ATM, 12 (29%) were subsequently diagnosed with MS over a median follow-up period of 7.7 years. Univariately, MS converters were younger (32 years [25–39] vs. 42 years [31–50], p = 0.032), had a lower CSF/serum albumin ratio (29 [24–35] vs 37 [27–52], p = 0.037), lower CSF total protein (4.5 [2.8–4.8] vs. 5.5 [3.4–8.5], p = 0.023) and a higher proportion of CSF-specific oligoclonal bands (OCB; 83% vs. 30%, p = 0.002). In the multivariate regression analysis, the presence of CSF-specific OCB emerged as the sole predictive factor of subsequent MS diagnosis (OR: 14.42, 95% CI 1.39 to 149.48, p = 0.03). In a collective of 42 patients with isolated ATM and an MS conversion rate of nearly 30%, the only but highly predictive factor were CSF-specific OCB. This emphasizes the significance of conducting timely CSF analysis in such patients and underscores the need for tailored monitoring and follow-up strategies in this specific group.

Comparative Performance Analysis of Catalysts for Syngas Production from Biogas: A Simulation Study Using DWSIM

This study explored how CH4/CO2 feed ratio, temperature, and pressure affect the conversion of carbon dioxide and methane and the H2/CO ratio of syngas using simulations for six catalysts: Rh/La2O3, Rh/La2O3-SiO2, Ru/La2O3, Ni-Co/Al-Mg-O, LaNiO3, and Ce-La-Ni-O2. Simulations with DWSIM© were conducted at CH4/CO2 feed ratios of 1–2, pressures of 1–5 bar, and temperatures of 550–750 °C. The effects showed that increasing the temperature by as much as 750 °C boosted the H2/CO ratio and improved CO2 and CH4 conversions because of the endothermic nature of the reactions. Higher pressure reduced conversion rates and H2/CO ratios across all catalysts, with a notable similarity between 2 and 5 bar, indicating thermodynamic limits. A higher feed ratio of CH4/CO2 decreased CH4 conversion while increasing the H2/CO ratio at the expense of reduced H2 yield. As the pressure decreases, the Ru/La2O3 and Rh/La2O3-SiO2 catalysts exhibited higher activity because of the kinetic factor. The current research focuses on the possibility of using dry reforming of biogas to synthesize syngas with suitable H2/CO ratios for different uses. The observations suggest that future studies should include techno-economic analysis to determine the least expensive catalysts that will ensure the dry reforming process yields the right composition of syngas.

Utilization of sterculia foetida oil as a sustainable feedstock for biodiesel production: optimization, performance, and emission analysis

This study examines the feasibility of employing Sterculia foetida oil as a sustainable feedstock for biodiesel production, offering an eco-friendly substitute for conventional diesel fuel without requiring engine alterations. The method employs a two-step catalytic process, first with acid esterification to reduce the free fatty acid (FFA) concentration, followed by alkaline esterification for biodiesel synthesis. Essential process parameters—such as reaction time, temperature, catalyst concentration, and molar ratio—are carefully optimized to improve biodiesel yield. Under optimal conditions, the process achieves an impressive conversion rate of 95.2 %, demonstrating the considerable potential of Sterculia foetida oil for biodiesel production. Furthermore, blends of Sterculia foetida biodiesel (SFB) and diesel demonstrate a notable decrease in harmful emissions, especially a 2.3 % reduction in carbon monoxide (CO), a 4.1 % reduction in hydrocarbons (HC), and a 1.9 % decrease in smoke emissions compared to pure diesel. This study highlights the innovative use of non-edible oil as feedstock, a customized optimization method, and a highly effective catalytic process, all while emphasizing environmental sustainability and reduced emissions.

Revision Surgeries After Proton vs Photon Postmastectomy Radiation Therapy in Prepectoral Implant-Based Breast Reconstruction.

Postmastectomy radiation therapy (PMRT) improves disease-free survival in breast cancer but reduces aesthetic satisfaction. Proton PMRT has gained popularity due to fewer systemic complications. There is a lack of data regarding revision surgeries for pre-pectoral implant-based breast reconstruction (PP-IBBR) following radiation. To compare the revision surgeries in PP-IBBR with photon versus proton PMRT. A single-institution retrospective cohort study included breast cancer patients undergoing mastectomy and PP-IBBR with PMRT (January 2020-October 2022) The mean follow-up duration for the cohort was 1056.4 days (2.89 years). Revision surgeries evaluated were fat grafting, conversion to autologous flaps, implant replacement, implant removal, capsulectomy, and scar revision. 116 PP-IBBR were divided into two cohorts: photon (75, 64.66%) and proton (41, 35.34%) radiation cohorts. Overall corrective surgeries were higher with photon (27.5% overall; 32.4% photon vs 19.5% proton, p=0.132). The odds of any revision surgery were nearly double with photon (OR=1.98), and the conversion to an autologous flap was significantly more likely with photon (OR=4.55, p=0.025). Multivariable analysis showed an increased tendency for photon therapy patients to require any revision surgeries (OR=1.62, p=0.359), autologous flaps (OR=5.97, p=0.049), fat grafting (OR=1.52, p=0.664) and scar revision (OR=4.51, p=0.273). Compared to proton therapy, traditional photon therapy has a higher conversion rate to autologous flaps with PP-IBBR. Photon therapy had higher rates of overall revision surgeries, however not statistically significant. Proton therapy is safer, with fewer revision surgeries, warranting larger studies and broader utilization.

Endoscopic Findings of a Patient Having Cholelithasis in SOMCH, Sylhet, Bangladesh

Introduction: Cholelithiasis is one of the most frequently encountered disease and one of the major causes of abdominal morbidity throughout world [1]. Cholelithiasis is one of the most common and costly of all digestive diseases. Common causes of upper abdominal symptoms are peptic ulcer, acute and chronic gastritis and gallstones. Objective: To assess the endoscopic findings of a patient having cholelithasis in SOMCH. Methods: This was Retrospective Hospital based study conducted at Department of Surgery, Sylhet MAG Osmani Medical College Hospital, Sylhet, Bangladesh from January to December 2022 were (One hundred patients were included). All patients underwent OGD after being diagnosed as having cholelithiasis proved by Endoscopic. All patients above 18 years of age presenting with upper abdominal pain, dyspepsia with or without jaundice diagnosed ultrasonically as cholelithiasis and choledocholithiasis with cholelithiasis were included in the study and patients managed conservatively, patients with primary choledocholithiasis and with asymptomatic gallstones were excluded from the study. Results: Out of 100 subjects evaluated during the study period, 58 were females and 42 males. The most common age group affected was between 31-50 years (65%), followed by less than 30 years of age being 18% and more than 50 years being 17%. It should also be noted the higher rate of incidence (65%) in the age group of 31-50 years. Associated symptoms with cholelithiasis were pain in abdomen, which was observed in all the patients (100%). Of these, 74 patients (74%) presented with chronic upper abdominal pain and 26 patients (26%) presented with acute upper abdominal pain. Remaining 56% of the subjects had positive endoscopic findings. Endoscopic findings were positive in 56 had hiatus hernia, duodinitis, duodenal ulcer or other positive findings. Among patients with positive findings 14 had both oeophagitis as well as gastritis while 12 had both gastritis as well as gastric ulcer. All the 56 patients (100%) underwent surgery. Forty patients (71.4%) underwent laparoscopic cholecystectomy, 14 (25.0%) open cholecystectomy and 2 cholecystostomy for empyema gall bladder. Of the 56 patients 40 patients (71.4%) patient had chronic cholecystitis, 9 patients (16.07%) had acute cholecystitis, 4 patients (7.14%) had carcinoma gall bladder, 2 (3.57%) had xanthogranulomatous cholecystitis and 1(1.78%) had cholesterolosis of gallbladder. Of the 4 patients diagnosed of carcinoma gallbladder, 1 patient had carcinoma confined to muscularis mucosa with negative margins and no metastasis, hence no further surgical management was advised and the rest of the 3 patients had either metastasis or positive margins which were managed as per standard guidelines. Conclusion: Cholelithiasis is commonly seen in females in 4th and 5th decade mainly presenting with abdominal pain and dyspepsia. Endoscopy the most common finding was gastritis, oesophagitis and gastric ulcer in decreasing order. There was no hiatus hernia, duodinitis or duodenal ulcer in our study. Patients presenting with dyspepsia and gall-stones in rural setup should be directly treated surgically. Multiple gallstones are common and Laparoscopic cholecystectomy offers best surgical management with 6.57% of conversion rate to open cholecystectomy, with lesser complications.

A Diketopinic Reagent for the Reversible Bioconjugation to Arginine Residues on Native Antibodies.

Arginine is one of the less commonly targeted amino acids in protein bioconjugation, despite its unique reactivity and abundance on the surface of proteins. In this work, a molecule containing diketopinic acid and an azide handle was developed for the chemo-selective bioconjugation to arginine. This compound proved to be efficient for bioconjugation to IgG1 and IgG4 antibodies, achieving mono- and double-label conversion rates of 37-44 and 12-30%, respectively. Mass spectrometry analysis confirmed the antibody modification at two conserved regions. The compound was also applied for the labeling of other proteins such as transferrin, BSA, and an EgA1 nanobody. The conjugation was shown to be reversible using an o-phenylenediamine-based alkaline solution. This novel conjugation method offers precise and stable bioconjugation to proteins, enhancing the potential for various biomedical applications.

Ni‐MOF‐74 Derived Carbon‐Based Ni Catalysts for Efficient Catalytic Ammonia Synthesis via Pulsed DBD Plasma

ABSTRACTDesigning efficient noble metal‐free catalysts for plasma‐catalytic ammonia synthesis is significant and challenging. Carbon‐based metal catalysts were prepared at different pyrolysis temperatures using the Ni‐MOF‐74 precursor. The effects of Ni‐MOF‐74 and its derived carbon‐based metal catalysts on pulsed dielectric barrier discharge (DBD) plasma ammonia synthesis were investigated. The results showed that Ni‐MOF‐74‐300 with both the MOF structure and nickel metal particles exhibited the best catalytic performance for ammonia synthesis. The ammonia synthesis rate reached 41.38 mmol g−1 h−1, whereas the nitrogen conversion rate was as high as 1.54% with an energy yield of 3.04 g kWh−1. Compared to the situation of plasma only, the ammonia synthesis rate, nitrogen conversion rate, and energy yield were increased by 28.46 times, 5.7 times, and 5.5 times, respectively.

Enhanced carbon sequestration via phosphogypsum utilization in conjunction with concrete wastewater treatment

The simultaneous utilization of concrete wastewater (CW) and phosphogypsum (PG) to mineralize CO2 for carbon reduction is a green and low-carbon treatment method. In this work, the combined carbonation process of CW and PG and the role of ammonia as an additive were investigated. The addition of ammonia balances the excess anions, inhibits CaCO3 resolvation, and enhances the gas–liquid mass transfer. The higher pH and ionic strength of CW help to accelerate the PG dissolution and increase the PG conversion rate. Simultaneously, a decalcification efficiency of 100 % for CW and a PG conversion rate of 98.00 % were achieved. This process resulted in a CO2 capture of 215.76 g CO2/kg PG, with the pH of the synergistically treated wastewater ranging from 6.43 to 7.54. Additionally, the common ionic effect of Ca2+ and SO42−, the salting effect of CW, and the salting-out effect of CO2 influenced the reaction. The formation of vaterite under pressurized conditions was primarily governed by pH, which played a key role in determining the crystal morphology. The interaction between CW and PG was further confirmed in 5 L scale-up experiments, during which ammonia recycling was also achieved. This study fully utilized CW, combining it with PG to efficiently repurpose wastewater and solid waste for resource recovery.

Modeling and Numerical Investigations of Flowing N-Decane Partial Catalytic Steam Reforming at Supercritical Pressure

Steam reforming is an effective method for improving heat sinks of hypersonic aircraft at high flight Mach numbers. However, unlike the industrial process of producing hydrogen with a high water content, the catalytic steam reforming mechanism for the regeneration cooling process of hydrocarbon fuels with a water content below 30% is still unclear. Catalytic steam reforming (CSR) and catalytic thermal cracking (CTC) reactions occur at low temperatures, with the main products being hydrogen and carbon oxides. Thermal cracking (TC) reactions occur at high temperatures, with the main products being alkanes and alkenes. The above reaction exists simultaneously in the regeneration cooling channel, which is referred to as partial catalytic steam reforming (PCSR). Based on the experimental measurement results, an improved neural network correction method was used to establish a four-step global reaction model for the PCSR of n-decane under low water conditions. The reliability of the four-step model was verified by combining the model with a numerical simulation program and comparing it with the experimental results obtained by electric heating hydrocarbon fuels with a pressure of 3 MPa and a water content of 5/10/15%. The experimental and predicted results using the developed kinetic model are consistent with an error of less than 5% in the decane conversion rate. The average absolute error between the fuel outlet temperature and total heat sink is less than 10%. Using the PCSR model to predict the heat transfer characteristics of mixed fuels with different water contents, the convective heat transfer coefficient is basically the same, and the Nu number is affected by the thermal conductivity coefficient, showing different patterns with changes in the water content.