Abstract Elevated lactate levels have been shown to be an indicator of poor outcome in cardiovascular patients [1]. Moreover, continuous monitoring of lactate may be more clinically valuable than the absolute value of lactate for risk stratification [2]. A promising approach involves the implementation of a lactate monitoring system inspired by advanced continuous glucose monitoring [3] to provide real-time measurements of lactate in interstitial fluid (ISF) based on miniaturized lactate sensors with submillimeter dimensions. The proposed amperometric lactate sensor employs Pt electrodes (WE = 0.785 mm²) on which the enzyme lactate oxidase is immobilized to selectively detect lactate. The sensing mechanism, shown in Fig. 1a, is based on the conversion of lactate to hydrogen peroxide, which then undergoes oxidation at the electrode surface, generating a current proportional to the concentration of lactate. Amperometric measurements are performed with an applied potential of 0.5 V, a sample volume of 2 µL and a flow rate of 1 µL/min, respecting real-life conditions. The response of the sensor towards lactate is shown in Fig. 1c, demonstrating excellent reversibility, long-term stability over 8 hours and negligible cross sensitivity to glucose (G), ascorbic acid (AA) and uric acid (UA). In addition, the sensor linear range can be extended by 10x by incorporating an outer Nafion layer, acting as a diffusion-limiter. As shown in Fig. 1d, by adjusting the thickness of Nafion layer, the linear range increases up to 20 mM lactate, as per ICU specifications. The physiological challenges associated with ISF extraction prompted us to develop a minimally invasive, submillimeter-sized sensor for direct placement inside the body. To address the most critical step of miniaturization, we have successfully fabricated a three-electrode platform on a Si ribbon measuring 300x1500 µm² and a thickness of 100 µm (Fig. 2a). The sensor is also drastically scaled down, with smallest design having a total sensing area of 200x500 µm² (WE = 0.026 mm², Fig. 2b). Its response to lactate is displayed in Fig. 2c, confirming a reliable functionality. Fig. 2d presents the calibration curves obtained from sensors with different sizes, indicating that the reduction in size does not affect the sensitivity. The developed lactate sensor demonstrates excellent performance: high sensitivity, excellent reversibility, and high stability. In addition, the linear range of the sensor is tunable by integrating an outer Nafion membrane. Finally, we demonstrate the successful fabrication and characterization of submillimeter-sized sensors, opening up their potential for minimally invasive in-vivo measurements.Working principle and characterizationCharacterization miniaturized sensors