Active Margin Research Articles

A heuristic-based benders decomposition for the hybrid relief distribution network minimizing deprivation cost of vulnerable areas

PurposeThe study aims to optimize truck routes by minimizing social and economic costs. It introduces a strategy involving diverse drones and their potential for reusing at DNs based on flight range. In HTDRP-DC, trucks can select and transport various drones to LDs to reduce deprivation time. This study estimates the nonlinear deprivation cost function using a linear two-piece-wise function, leading to MILP formulations. A heuristic-based Benders Decomposition approach is implemented to address medium and large instances. Valid inequalities and a heuristic method enhance convergence boundaries, ensuring an efficient solution methodology.Design/methodology/approachResearch has yet to address critical factors in disaster logistics: minimizing the social and economic costs simultaneously and using drones in relief distribution; deprivation as a social cost measures the human suffering from a shortage of relief supplies. The proposed hybrid truck-drone routing problem minimizing deprivation cost (HTDRP-DC) involves distributing relief supplies to dispersed demand nodes with undamaged (LDs) or damaged (DNs) access roads, utilizing multiple trucks and diverse drones. A Benders Decomposition approach is enhanced by accelerating techniques.FindingsIncorporating deprivation and economic costs results in selecting optimal routes, effectively reducing the time required to assist affected areas. Additionally, employing various drone types and their reuse in damaged nodes reduces deprivation time and associated deprivation costs. The study employs valid inequalities and the heuristic method to solve the master problem, substantially reducing computational time and iterations compared to GAMS and classical Benders Decomposition Algorithm. The proposed heuristic-based Benders Decomposition approach is applied to a disaster in Tehran, demonstrating efficient solutions for the HTDRP-DC regarding computational time and convergence rate.Originality/valueCurrent research introduces an HTDRP-DC problem that addresses minimizing deprivation costs considering the vehicle’s arrival time as the deprivation time, offering a unique solution to optimize route selection in relief distribution. Furthermore, integrating heuristic methods and valid inequalities into the Benders Decomposition approach enhances its effectiveness in solving complex routing challenges in disaster scenarios.

Chronological, Petrogenetic, and Tectonic Significance of Paleoproterozoic Continental Crust within the North China Craton during the Global Tectono-Magmatic Lull

Abstract The 2.45–2.20 Ga period during the early Paleoproterozoic era is considered to have witnessed a global “Tectono-Magmatic Lull (TML)” and thus marks a relatively quiescent period. Our study unveils a 2.45–2.20 Ga magmatic suite from the Xiong’ershan area in the southern North China Craton, offering some key constraints on localized active tectonics during the TML. Zircon U-Pb dating shows Paleoproterozoic ages for the meta-basalt (2.31, 2.28 Ga), Na-rich meta-andesite (~2.33 Ga), tonalite-trondhjemite-granodiorite (TTG) gneisses (2.36, 2.30 Ga), K-rich granodiorite (~2.29 Ga), and monzogranite (2.33, 2.27 Ga). The meta-basalts geochemically and petrographically belong to calc-alkaline basalts and show distinctive Nb, Ta, and Ti contents and primitive mantle normalized patterns from different places in the Xiong’ershan area. Combined with their enriched εHf(t) values, the magmas were derived from subduction-related enriched mantle sources within a convergent plate boundary. The meta-andesites display high MgO content (average 4.5 wt%) and Mg# (44–57), strongly fractionated rare-earth pattern, calc-alkaline affinity, and negative Nb, Ta, and Ti anomalies. The TTG gneisses are of high SiO2 type (>62 wt%), high (La/Yb)N (17.5, 39.2), and Sr/Y (50.2, 104.3) and mostly display positive Eu anomalies and high-pressure type. Zircons from these rocks show a relatively narrow range of δ18O isotope values (5.35‰, 6.79‰) with εHf(t) isotope characteristics (−9.3, −3.3), suggesting derivation from partial melting of a thickened mafic lower crust. The youngest K-rich granodiorite and monzogranite show high K2O/Na2O ratios (0.65, 2.45). Variable molar ratio Al2O3/(CaO+Na2O+K2O) (A/CNK) and low zircon εHf(t) values suggest that the K-rich granitoids formed from the partial melting of different levels of crust. The presence of meta-basalt to andesite assemblages and diverse intermediate to felsic magmatic rocks implies magmatic activity within a convergent plate boundary tectonic environment with potential influence from plume-triggered extensional processes, supported by evidence of slab rollback and upwelling of mantle material.

Enrichment of arsenic in the Yarlung Tsangpo basin, Southern Tibetan Plateau: Provenance, process, and link with tectonic setting

Geogenic As enrichment is prevalent in freshwater systems worldwide, yet the connection between such enrichment and regional tectonics remains poorly understood, especially within orogenic environments like the Tibetan Plateau. To provide new insights into the sources and processes of arsenic, as well as its relationship with tectonics in the plateau basin, we selected the Yarlung Tsangpo basin, situated at the collision zone between the Indian (Himalaya block) and Eurasian plates (Lhasa block) as the study area. We analyzed and compared the chemical compositions of waters and sediments across various litho-tectonic domains. This also involved assessing arsenic concentrations in river waters, suspended particulate matter (SPM), sediments, geothermal waters, and rocks. The main findings are as follows: (a) High-arsenic geothermal waters and igneous rocks are common in the Lhasa block, and the discharge of these geothermal waters is the main source of dissolved As in river water, whereas erosion of igneous rocks contributes most of the As in sediments. (b) Metal oxides adsorb dissolved As, which leads to further As enrichment in the sediments. (c) The occurrence of high As concentrations in the southern Tibetan Plateau can be explained by a crustal cycling model. Arsenic likely originated in Neo-Tethys oceanic crustal rocks and was concentrated in the upper crust of the active continental margin (Lhasa block) during geological cycling at convergent plate boundaries. These studies highlight the role of tectonic settings on influencing arsenic enrichment in the plateau basin.

Intraplate thrust orogeny of the Altai Mountains revealed by deep seismic reflection

The Altai orogen is a typical intracontinental orogen in Central Asia that experienced far-field deformation associated with Indian-Eurasian plate convergence. This region is characterized by uplift comparable to that of the Tianshan Mountains but has a distinct strain rate. Half of the Indo-Asia strain is accommodated by the Tianshan Mountains, whereas the Altai Mountains accommodates only 10%. To elucidate how the Altai Mountains produced such a large amount of uplift with only one-fifth of the strain rate of the Tianshan Mountains, we constructed a detailed crustal image of the Altai Mountains based on a new 166.8-km deep seismic reflection profile. The prestack migration images reveal an antiform within the Erqis crust, an ∼10 km Moho offset between the Altai arc and the East Junggar area, and a major south-dipping (30° dip) thrust in the lower crust beneath the Altai Mountains, which is connected to the Moho offset. The south-dipping thrust not only records the southward subduction of the Ob-Zaisan Ocean in the Paleozoic but also controlled the Altai deformation pattern in the Cenozoic with the Erqis antiform. The Erqis antiform prevented the extension of deformation to the Junggar crust. The south-dipping thrust in the lower crust of the Altai area caused extrusion of the lower crust, generating uplift at the surface, thickening of the crust, and steep (∼10 km) Moho deepening in the Altai Mountains. This process significantly widened the deformation zone of the Altai Mountains. These findings provide a new geodynamic model for describing how inherited crustal structure controls intraplate deformation without strong horizontal stress.

Geology of the Asinara Island (Sardinia, Italy)

ABSTRACT Understanding how the lithosphere accommodates deformation along oblique convergent plate boundaries is an important issue for unveiling orogenic belt exhumation. The Variscan belt exposed in Sardinia represents an area where it is possible to investigate the inner part of this orogen and a km-scale transpressive shear zone, i.e. the Posada-Asinara shear zone, that drove the exhumation of the metamorphic core of the belt. Even though the Asinara island offers very good exposure of main tectonic units building up the Variscan belt of Sardinia, a detailed geological map of the island is still lacking, due to a former limitation of access that lasted for many years. In this contribution, we compile a new 1:25.000 geological-structural map of the entire Asinara island useful to better understand this key sector of the Variscan belt in Sardinia.

Linking Porphyry Cu Formation to Tectonic Change in Postsubduction Settings: A Case Study from the Giant Yulong Belt, Eastern Tibet

Abstract Porphyry deposits in magmatic arcs form coincident with changes to steady-state oceanic subduction conditions, such as changes in plate convergence rate and vector or angle of subduction. However, it remains unclear whether such processes also operated during formation of postsubduction porphyry deposits. The Yulong magmatic belt in the eastern Tibetan Plateau consists of middle to late Eocene igneous rocks (~51–35 Ma) that formed during the India-Asia collision, whereas all known porphyry deposits are associated with late Eocene rocks (43–35 Ma). A synthesis of new and published geochemical data shows marked variations from the middle to late Eocene, including increasing whole-rock La/Yb, Sr/Y, and EuN/EuN* values, as well as zircon EuN/EuN* values. These geochemical variations, together with petrographic observations, indicate a transition from plagioclase-dominated to amphibole-dominated fractionation from the middle to late Eocene. Coupled changes of magma compositions and porphyry Cu metallogeny from the middle to late Eocene coincided with, or were slightly preceded by, the onset of regional uplift and crustal thickening, triggered by the India-Asia hard collision and rapid deceleration of the India-Asia convergence rate at ca. 50 to 44 Ma. Crustal thickening may have caused prolonged magma differentiation at greater depths and accumulation of dissolved H2O, both of which contributed to amphibole-dominated fractionation and generation of hydrous melt that are prospective for porphyry Cu mineralization. Our study highlights the importance of tectonic changes in the formation of the Yulong and other postsubduction porphyry Cu belts—a scenario similar to that operated in subduction-related settings such as the Andes.

Extensional exhumation of cratons: insights from the Early Cretaceous Rio Negro–Juruena belt (Amazonian Craton, Colombia)

Abstract. This study presents results from apatite fission track (AFT) thermochronology to investigate the thermal history and exhumation dynamics of the Rio Negro–Juruena basement, situated within the western Guiana Shield of the Amazonian Craton. AFT dating and associated thermal history modeling in South America has largely been restricted to the plate's margins (e.g., Andean active margin, Brazilian passive margin, and others). Our paper reports on low-temperature thermochronological data from the internal part of the western Guiana Shield for the first time. This area is part of a vast cratonic lithosphere that is generally thought to be stable and little influenced by Mesozoic and Cenozoic tectonics. Our data, however, show AFT central ages ranging from 79.1 ± 3.2 to 177.1 ± 14.8 Ma, with mean confined track lengths of ca. 12 µm. Contrary to what might be expected of stable cratonic shields, inverse thermal history modeling indicates a rapid basement cooling event in the early Cretaceous. This cooling is interpreted as a significant exhumation event of the basement that was likely driven by the coeval extensional tectonics associated with back-arc rifts in the Llanos and Putumayo–Oriente–Maranon basins. The extensional tectonics facilitated both basement uplift and subsidence of the adjoining basins, increasing erosional dynamics and consequent exhumation of the basement rocks. The tectonic setting shifted in the late Cretaceous from extensional to contractional, resulting in reduced subsidence of the basins and consequential diminishing cooling rates of the Guiana Shield basement. Throughout the Cenozoic, only gradual, slow subsidence occurred in the study area due to regional flexure linked to the Andean orogeny. Comparative analysis with low-temperature thermochronology data from other west Gondwana cratonic segments highlights that exhumation episodes are highly controlled by tectonic inheritance, lithospheric strength, and proximity to rift zones. This study underscores the complex interplay between tectonic events and the response of cratonic lithosphere over geological timescales and highlights extensional settings as an important geological context for craton exhumation.

Seamount Subduction Dynamics and Long‐Term Evolution of the Franciscan Active Margin

AbstractThe Snow Mountain Volcanic Complex (SMVC; northern California, USA) is a well‐preserved example of a coherently‐exhumed subducted seamount. This study reappraises the genesis and evolution of this complex and surrounding units through detailed field, petro‐structural and geochronological analyses. This work demonstrates that the SMVC (a) erupted at ∼166 Ma as a hotspot volcano on the Farallon Plate, (b) entered the Franciscan subduction trench at ∼118 Ma, and (c) was subsequently subducted to a depth of ∼20 km (within the seismogenic zone), as shown by local blueschist‐facies assemblages formed at 0.6 GPa, 240°C. Transient subduction interfaces are preserved above, within, and below the SMVC, making it an exceptional target to study seamount subduction dynamics. Like other seamounts, the subduction‐related deformation was mainly accommodated along kilometer‐scale internal thrust zones lubricated by serpentinite/metasediments, and within centimeter‐thick crack‐seal veins recording pulsed fluid flow near peak metamorphism. No unequivocal proof of seismic activity was found. The integration of other seamounts (some potentially belonging to a former seamount chain) in the Franciscan Complex suggests that exhumed seamounts are more abundant than previously thought. Moreover, pressure‐temperature‐time estimates of subduction metamorphism for the surrounding units, combined with previous work constrain the thermal maturation of the subduction zone through time and the in‐sequence emplacement of the SMVC. Rapid changes in age of the subducted oceanic plate when subducted additionally hint to the subduction of large‐offset transform faults on the former Farallon plate. Such a process might have been linked to changes in accretion dynamics and magmatic flare‐ups in the arc.

Unveiling attenuation structures in the northern Taiwan volcanic zone.

This cutting-edge study delves into regional magmatism in northern Taiwan through advanced 3-D P- and S-wave frequency-dependent attenuation tomography. Positioned at the dynamic convergence boundary between the Philippine Sea Plate and the Eurasian Plate, Taiwan experiences moderate earthquakes and intriguing volcanic activity, with a focus on the Tatun volcano group. Employing the Formosa seismic array for high-resolution results, our research identifies high-attenuation anomalies (low Q) beneath the northern Taiwan volcanic zone (NTVZ) and offshore submarine volcanoes, indicative of potential hydrothermal activities and magma reservoirs at varying depths. Additionally, we explore low-attenuation anomalies (high Q) in the forearc region of the Ryukyu subduction zone, suggestive of partial saturation linked to serpentinization processes resulting from seawater infiltration or forearc mantle hydration. These findings shed light on the complex geological features and provide essential insights into the crustal properties of northern Taiwan, contributing to a deeper understanding of its magmatic evolution and tectonic processes.

Cretaceous stratigraphy of Antarctica and its global significance

Abstract The Cretaceous Period is particularly well represented by a thick sequence of clastic sedimentary rocks exposed in the Antarctic Peninsula region of western Antarctica. This was an active margin throughout the Late Mesozoic, and in total some 7 km+ of Cretaceous sedimentary rocks accumulated in a series of fore-, intra- and back-arc basins. The Fossil Bluff Group of eastern Alexander Island can be traced from the Jurassic–Cretaceous boundary into the Upper Albian and represents a broad-scale shallowing-upward sequence from deep marine to a prominent Upper Albian fluvial interval in which high-density forests developed at a palaeolatitude of 75° S. The Cretaceous sequence exposed in the James Ross Island group continues right through the Upper Cretaceous to the Cretaceous–Paleogene boundary. The Campanian–Maastrichtian succession in particular is over 2 km in total thickness and richly fossiliferous. The improved Cretaceous stratigraphy of Antarctica is an invaluable terrestrial record of climatic change at a high palaeolatitude. This includes a gradual increase in temperature to the Cretaceous Thermal Maximum, and then a decline to the Cretaceous–Paleogene boundary. There may be no simple link between these palaeotemperature changes and Cretaceous patterns of biotic radiation and extinction.

Onset of double subduction controls plate motion reorganisation

Face-to-face double subduction systems, in which two oceanic plates subduct toward each other, are essential elements of plate tectonics. Two subduction zones in such systems are typically uneven in age and their spatially and temporally variable dynamics remain enigmatic. Here, with 2D numerical modelling, we demonstrate that the onset of the younger subduction zone strongly changes the dynamics of the older subduction zone. The waxing younger subduction may gradually absorb plate convergence from the older one, resulting in older subduction waning featured by the dramatic decrease in subduction rate and trench retreat. The dynamical transformation of subduction predominance alters the intraplate stress and mantle flow, regulating the relative motion among the three different plates. The process of waxing and waning of subduction zones controls plate motion reorganisation, providing a reference to interpret the past, present, and future evolution of several key double subduction regions found on the modern Earth.

The tectonic setting of the late Ediacaran eastern Arabian basement (ca. 550 Ma): New geochronological and geochemical constraints from the basements of Oman and the United Arab Emirates

The thick Phanerozoic sedimentary cover lying above the Arabian Platform conceals extensive basement between the western Neoproterozoic domains of the Arabian Nubian Shield (ANS) and of the eastern Omani basement. The Neoproterozoic rocks entrained within salt domes that crop out within the United Arab Emirates (UAE) and Qatar are the only direct samples that allow us to investigate the tectonic history of the concealed Arabian basement domains before c. 550 Ma. This study focuses on the U-Pb geochronological and REE geochemical analysis of detrital zircon, apatite, titanite and rutile grains from the Zirku turbidites brought to the surface by halokinetic movements offshore UAE. These data are compared with new U-Pb and REE data from detrital heavy minerals of three metasedimentary members of the Omani Neoproterozoic Hatat Formation collected in the Saih Hatat window. The Omani metasedimentary units yield detrital titanite, zircon and apatite U–Pb ages that span from c. 2500 to 690 Ma, with an age maxima at c. 850 Ma, while the UAE unit yield ages from c. 2550 to 550 Ma with major age peaks at c. 1000, 820, 650 Ma. The analysis of the Omani stratigraphic sequence in the Saih Hatat window revealed that the rocks of the Neoproterozoic Hatat Formation yield similar age distributions of the Abu Mahara Group (lower Huqf Supergroup, exposed in central and southern Oman), and that the REE geochemical composition of the Hatat detrital apatite grains shares akin REE signature with the c. 550 detrital apatite of the Zirku Formation, with both being sourced from volcanic-arcs. These new geochronological and geochemical data, together with recent geophysical evidences, suggest that the basement of the UAE is originally part of the Oman tectonic domain and evolved as part of a volcanic-arc in an active margin at c. 550 Ma, which we interpret as part of the retro-arc of the Cadomian collision in between the Arabian and the Cadomian Taurides, Iran and Afghanistan terranes.

Efficient convergent boundary integral methods for slender bodies

The interaction of fibers in a viscous (Stokes) fluid plays a crucial role in industrial and biological processes, such as sedimentation, rheology, transport, cell division, and locomotion. Numerical simulations generally rely on slender body theory (SBT), an asymptotic, nonconvergent approximation whose error blows up as fibers approach each other. Yet convergent boundary integral equation (BIE) methods which completely resolve the fiber surface have so far been impractical due to the prohibitive cost of layer-potential quadratures in such high aspect-ratio 3D geometries. We present a high-order Nyström quadrature scheme with aspect-ratio independent cost, making such BIEs practical. It combines centerline panels (each with a small number of poloidal Fourier modes), toroidal Green's functions, generalized Chebyshev quadratures, HPC parallel implementation, and FMM acceleration. We also present new BIE formulations for slender bodies that lead to well conditioned linear systems upon discretization. We test Laplace and Stokes Dirichlet problems, and Stokes mobility problems, for slender rigid closed fibers with (possibly varying) circular cross-section, at separations down to 1/20 of the slender radius, reporting convergence typically to at least 10 digits. We use this to quantify the breakdown of numerical SBT for close-to-touching rigid fibers. We also apply the methods to time-step the sedimentation of 512 loops with up to 1.65 million unknowns at around 7 digits of accuracy.

Complex Function Solution of Stratum Displacements and Stresses in Shallow Rectangular Pipe Jacking Excavation Considering the Convergence Boundary

The construction of pipe jacking has little impact on the environment and is usually used to build underground passages with shallow buried depths and short lengths. Compared with circular pipe jacking, rectangular pipe jacking has the advantages of shallow buried depth and high space utilization. Therefore, research on the excavation of rectangular pipe jacking is necessary. This paper establishes a cross-section model of shallow buried rectangular pipe jacking excavation. Taking advantage of complex functions for solving problems involving non-circular tunnels, an analytical solution is obtained using an approximate mapping function and potential functions in series forms for the stress and displacement of the stratum with a displacement condition at the excavation boundary and a stress condition at the ground surface boundary. The finite element simulation results and the engineering-measured data are used for comparisons and verifications. With the analytical solution of the complex function, the influence of selecting control points for the mapping function on the accuracy is calculated and analyzed, as well as the influence of the stratum loss rate, span, buried depth, and stratum unit weight on surface subsidence and major principal stress of the excavation boundary. The proposed analytical solution can be applied to the construction of rectangular pipe jacking tunnels.

Lithospheric Rheology and Crustal Deformation Across the Northeastern Tibet and Their Implications for Plateau Growth

AbstractUnderstanding lithospheric rheology is crucial in investigating tectonic evolution of intra‐continental tectonic boundary. Here, we use geodetic observations to infer lithospheric rheology across the northeastern Tibet based on a 2D viscoelastic model. Our findings reveal a lower‐crust viscosity of <1022 Pa·s underneath its margins, lower than those estimated underneath its vicinities. By comparing deformation patterns and lithospheric rheology here with those observed in the eastern Tibet, we propose that lateral variations in lower‐crust viscosity control deformation patterns and topographic gradients along the Tibet margins. The presence of low viscosity lower‐crust can lead to the development of contrasting topographic gradients and shape the plateau's geomorphology and deformation characteristics during outward growth of the Tibet. We here emphasize the subtle variations in the lower‐crust rheology between deforming blocks and the corresponding mountain ranges, which play an important role in orogeny along the intracontinental convergence boundary.

Humid climate phases on the Island of Rhodes (Greece) during the late Pliocene at times of sapropel formation

The Island of Rhodes, located in the Eastern Mediterranean Sea, is affected by an active convergent plate boundary. In this context, marine sediments of Plio-Pleistocene age have been uplifted and are outcropping along the eastern coast of Rhodes. These archives provide an excellent opportunity to unravel the hydrological and climatic changes of the region during the late Pliocene. Our results provide new evidence for a more humid climate and an increased precipitation on the island during times of Northern Hemisphere summer insolation maxima and related sapropel formation in the Mediterranean deep sea. The periodic occurrence of eutrophic conditions at the shelf and upper slope off Rhodes is indicated by the recurrent dominance of eutrophic indicator species (of the genera Bolivina, Eubuliminella and Rectuvigerina), simultaneously with a decline in diversity and oligotrophic indicator species. These conditions resulted from higher primary productivity, triggered by local effects, such as enhanced precipitation and river run-off, which consequently favors the appearance of eutrophic taxa. The ∆δ13C records of the epibenthic foraminifera Cibicidoides pseudoungerianus and the shallow infaunal species Uvigerina peregrina indicate a slight productivity decrease towards younger times.

Successive accretions of future allochthonous terranes and multiple subduction zone jumps: Implications for Tethyan evolution

Abstract The accretion of future allochthonous terranes (e.g., microcontinents or oceanic plateaus) onto the southern margin of Asia occurred repeatedly during the evolution and closure of the Tethyan oceanic realm, but the specific geodynamic processes of this protracted convergence, successive accretion, and subduction zone initiation remain largely unknown. Here, we use numerical models to better understand the dynamics that govern multiple terrane accretions and the polarity of new subduction zone initiation. Our results show that the sediments surrounding the future terranes and the structural complexity of the overriding plate are important factors that affect accretion of multiple plates and guide subduction polarity. Wide (≥400 km) and buoyant terranes with sediments behind them and fast continental plate motions are favorable for multiple unidirectional subduction zone jumps, which are also referred to as subduction zone transference, and successive terrane-accretion events. The jumping times (~3–20 + m.y.) are mainly determined by the convergence rates and rheology of the overriding complex plate with preceding terrane collisions, which increase with slower convergence rates and/or a greater number of preceding terrane collisions. Our work provides new insights into the key geodynamic conditions governing multiple subduction zone jumps induced by successive accretion and discusses Tethyan evolution at a macro level. More than 50 m.y. after India-Asia collision, subduction has yet to initiate along the southern Indian plate, which may be the joint result of slower plate convergence and partitioned deformation across southern Asia.

Convergent plate boundary environments for formation of ≥ 3800 Ma mafic–ultramafic assemblages (Isua area, Greenland): Implications for early global geodynamics

In the gneiss terrane on the south side of the Eoarchean Isua supracrustal belt, ultramafic rocks with relict abyssal peridotite mineralogy (Bennett et al., 2002; Friend et al., 2002; Nutman et al., 2007; Rollinson, 2007; van de Löcht et al., 2020), layered gabbros with cumulate ultramafic rocks, basalts and associated siliceous sedimentary rocks were tectonically-imbricated, prior to and during intrusion of ca. 3800 Ma tonalites. Together with ≥ 3800 Ma basalts in the Outer Arc Group of the nearby Isua supracrustal belt, the composition of all these mafic rocks (e.g., Th–Hf–Nb systematics, high Th/Yb, Ba/Nb, Ba/Yb ratios and negative Nb and Ti anomalies) shows affinity with modern suprasubduction rocks whose genesis involved fluid fluxing of the upper mantle. However, the majority of these samples have Ba/Nb and Ba/Yb values less than in modern island arc magmas, but similar to many backarc basin magmas (e.g., Pearce and Stern, 2006). It is unknown whether these ca. 3800 Ma mafic rocks are, (i) arc rocks where the Ba/Nb and Ba/Yb signatures reflect lower surficial Ba in Eoarchean oceanic settings, or (ii) in direct comparison with Phanerozoic suites, these signatures reflect a back-arc setting with interplay between fluid fluxing and decompressional melting. The tectonic intercalation of upper mantle with lower and upper crustal rocks, combined with the fluid-fluxing influences seen in chemistry of all the mafic rocks is best accommodated in a compressional Eoarchean convergent plate boundary setting within a mobile-lid regime. Thus stagnant lid scenarios of crust formation, if operative, must have co-existed or alternated with mobile-lid regimes by 3800 Ma.

Late-orogenic extension ceases with waning plate convergence: The case of the Simplon normal fault (Swiss Alps)

The Simplon normal fault in the Western Alps caused tens of kilometers of orogen-parallel extension during convergence of the European and Adriatic plates, but the slip rate of the fault and the time when normal faulting ended are still debated. Here, we constrain the slip history of the Simplon fault with low-T thermochronology and thermo-kinematic modeling. Closely spaced samples from an elevation profile in the center of the fault yield zircon (U–Th)/He ages (ZHe) that are nearly invariant over an altitude of 1.4 km and cluster around ∼6 Ma. In contrast, apatite (U–Th)/He ages (AHe) increase with altitude from 3.4 ± 0.3 to 4.6 ± 0.7 Ma, while the AFT ages range from 4.4 ± 0.7 to 5.8 ± 1.5 Ma. In addition, recently published 40Ar/39Ar ages constrain that our samples moved through the brittle-ductile transition (i.e., ∼300 °C) at 8–10 Ma. Our thermo-kinematic inverse modeling shows that these age data can be explained by a single phase of normal faulting, which lasted from 19.8 ± 1.8 to 5.3 ± 0.3 Ma and caused 45 ± 10 km of extension. The slip rate of the 30°-dipping model fault is 3.5 ± 0.3 km/Myr and equivalent to an exhumation rate of ∼1.8 km/Myr. Our modeling reveals that the altitude-dependent difference between ZHe and AHe ages reflects the thermal relaxation after faulting stopped at ∼5.3 Ma. Since then, exhumation by erosion continued at a rate of ∼0.5 km/Myr. Remarkably, the end of slip on the Simplon fault coincides with the cessation of reverse faulting at 6 ± 2 Ma in the external crystalline massifs of the Alps (Aar, Mont Blanc, Aiguilles Rouges) and with a decrease in strain rate by one order of magnitude at 5-4 Ma in the Swiss molasse basin and the Jura mountains. This temporal coincidence suggests that normal faulting in the internal part of the Alps ceased when plate convergence waned and the under-thrusting of European continental lithosphere beneath the Adriatic plate came to an end.

Tectono‐climatic and depositional environmental controls on the Neolithic habitation sites, Vaigai River Basin, Southern India

The establishment, development and abandonment and/or destruction of ancient civilizations were catalytically controlled by geomorphic features such as lakes and rivers and the climate. This paper examined the possible influence of tectonism and climate on six habitations of the ancient Vaigai River Basin civilization in South India, using multiple proxies such as grain size, geochronology and geochemistry of the sedimentary archives. The tectonic setting of the basin changed between the active margin and passive margin; the discriminant diagrams suggested varying provenance and changing climatic conditions over the mid‐ and‐late Holocene. Tectonic activism and quiescence, base‐level change in the channel morphology led to the burial/marooning of the first habitation surface. Overall, arid conditions were punctuated with catastrophic flooding and peak discharge (flood) destroyed the second, third and fourth habitation sites. These flooding events were characterized by moderate weathering (CIA) and high values of Al, Fe and Rb/Sr and low Ca/Mg in the sediment records. The abandonment/destruction of the fifth habitation also occurred during an arid interval (droughts), possibly caused by weak monsoon. Along with the interactions between tectono‐climatic and fluvial geomorphic factors, the new results provided avenues to (a) check and recognize the archives for 8.2 and 4.2 ka‐like events in this part of the world, and (b) the utility of integrated analyses to constrain on the civilizational histories of the mankind.