Convergence Efficiency Research Articles

Path Optimization of Container Multimodal Transportation Considering Differences in Cargo Time Sensitivity

To optimize the container multimodal transportation path selection problem with differences in cargo time sensitivity, this paper introduces the concept of mixed time windows and establishes an integer programming model from the perspective of carriers. The objective is to minimize the total transportation cost while meeting the customer’s on-time delivery requirements. The model imposes hard time window constraints on cargoes with on-time delivery requirements and soft time window constraints on general cargoes. A bi-level genetic algorithm is employed to solve the model. A case study is conducted to demonstrate the effectiveness of the proposed approach. Experimental results show that the bi-level genetic algorithm’s convergence ability, efficiency, stability, and global search capabilities are far superior to those of traditional single-level genetic algorithms. This indicates that the use of multi-stage solution approaches can mitigate the shortcomings of genetic algorithms in dealing with high-dimensional problems. In addition, when analyzing the effects of time penalty intensity and time window on decision-making results, it is found that the more time-sensitive cargoes are more likely to be affected by the time window setting, and will tend to sacrifice costs to ensure that the time demand is met. At the same time an increase in demand for time-sensitive services is accompanied by an increase in operating costs. Accurate assessment and classification of time sensitivity of cargoes can effectively prevent wasting resources in unnecessary areas, and ultimately maximize decision outcomes and ensure the most efficient use of resources.

A Multi-Agent RL Algorithm for Dynamic Task Offloading in D2D-MEC Network with Energy Harvesting.

Delay-sensitive task offloading in a device-to-device assisted mobile edge computing (D2D-MEC) system with energy harvesting devices is a critical challenge due to the dynamic load level at edge nodes and the variability in harvested energy. In this paper, we propose a joint dynamic task offloading and CPU frequency control scheme for delay-sensitive tasks in a D2D-MEC system, taking into account the intricacies of multi-slot tasks, characterized by diverse processing speeds and data transmission rates. Our methodology involves meticulous modeling of task arrival and service processes using queuing systems, coupled with the strategic utilization of D2D communication to alleviate edge server load and prevent network congestion effectively. Central to our solution is the formulation of average task delay optimization as a challenging nonlinear integer programming problem, requiring intelligent decision making regarding task offloading for each generated task at active mobile devices and CPU frequency adjustments at discrete time slots. To navigate the intricate landscape of the extensive discrete action space, we design an efficient multi-agent DRL learning algorithm named MAOC, which is based on MAPPO, to minimize the average task delay by dynamically determining task-offloading decisions and CPU frequencies. MAOC operates within a centralized training with decentralized execution (CTDE) framework, empowering individual mobile devices to make decisions autonomously based on their unique system states. Experimental results demonstrate its swift convergence and operational efficiency, and it outperforms other baseline algorithms.

Neural networks for turbulent transport prediction in a simplified model of tokamak plasmas

The method of using neural networks (NNs) for turbulent transport prediction in a simplified model of tokamak plasmas is explored. The NNs are trained on a database obtained via test-particle simulations of a transport model in the slab-geometrical approximation. It consists of a five-dimensional input of transport model parameters, and the radial diffusion coefficient as output. The NNs display fast and efficient convergence, a validation error below 2 % , and predictions in excellent agreement with the real data, obtained orders of magnitude faster than test-particle simulations. In comparison to a spline interpolation, the NN outperforms, exhibiting better predicting and extrapolating capabilities. We demonstrate the preciseness and efficiency of this method as a proof-of-concept, establishing a promising approach for future, more comprehensive research on the use of NNs for transport predictions in tokamak plasmas.

Stochastic inversion of fracture networks using the reversible jump Markov chain Monte Carlo algorithm

Characterization of fracture networks is essential in the production optimization or storage calculation for enhanced geothermal systems or geologic carbon storage. A novel inversion approach is proposed for estimating the fracture networks in this research. The discrete fracture network technique is adopted to probabilistically describe various fracture parameters such as trace length, midpoint position or azimuthal angle. The reversible jump Markov chain Monte Carlo algorithm is applied to explore the target posterior distribution of model parameters of differing dimensionality, in which the number of fractures is assumed to be unknown. More specifically, the birth-death strategy is utilized to perturb the fracture number iteratively in the sampling process. The proposed methodology is applied with two different types of observational datasets, namely the head records from steady-state flow simulation and the acoustic impedance obtained from seismic inversion. The sampling results can successfully recover the fracture geometry in the observed domain, and the number of fractures in the system can be retrieved as well. Benchmarked on multiple Markov chain trials, the technique of parallel tempering can greatly improve the convergence efficiency and increase the diversity of sampled posterior models, through the random swapping of model states across the whole temperature ladder.

MECSBO: Multi‐strategy enhanced circulatory system based optimisation algorithm for global optimisation and reliability‐based design optimisation problems

AbstractThe Circulatory System Based Optimisation (CSBO) stands as a nascent metaheuristic optimisation algorithm known for its proficiency in tackling global optimisation problems. The authors introduce the Multi‐strategy Enhanced CSBO (MECSBO), an algorithm designed for global optimisation and Reliability‐based Design Optimisation (RBDO). MECSBO integrates adaptive inertia weight, golden sine operator and chaos strategy to augment the convergence capacity and efficiency of the original CSBO. Furthermore, MECSBO‐based RBDO algorithm is presented to address RBDO problem. The comparative analysis utilising standard real‐world benchmark functions has been carried out to validate the effectiveness of the proposed MECSBO. Several RBDO problems, including three typical numerical examples and three engineering cases, are used to show abilities of the proposed MECSBO‐based RBDO algorithm. The results demonstrated that MECSBO is outperformed comparing to the state‐of‐the‐art algorithms in terms of accuracy, efficiency, and robustness in RBDO problems.

Full waveform inversion and Lagrange multipliers

SUMMARY Full-waveform inversion (FWI) is an effective method for imaging subsurface properties using sparsely recorded data. It involves solving a wave propagation problem to estimate model parameters that accurately reproduce the data. Recent trends in FWI have seen a renewed interest in extended methodologies, among which source extension methods leveraging reconstructed wavefields to solve penalty or augmented Lagrangian (AL) formulations have emerged as robust algorithms, even for inaccurate initial models. Despite their demonstrated robustness on synthetic data, challenges remain, such as the lack of a clear physical interpretation and reliance on difficult-to-compute least-squares (LS) wavefields. Moreover, the literature lacks a general and through comparison of these source extension methods with each other and with the standard FWI. This paper is divided into three critical parts. In the first, a novel formulation of these methods is explored within a unified Lagrangian framework. This novel perspective permits the introduction of alternative algorithms that use LS multipliers instead of wavefields. These multiplier-oriented variants appear as regularizations of the standard FWI, are suitable to the time domain, offer tangible physical interpretations, and foster enhanced convergence efficiency. The second part of the paper delves into understanding the underlying mechanisms of these techniques. This is achieved by solving the associated non-linear equations using iterative linearization and inverse scattering methods. The paper provides insight into the role and significance of Lagrange multipliers in enhancing the linearization of the equations. It explains how different methods estimate multipliers or make approximations to increase computing efficiency. Additionally, it presents a new physical understanding of the Lagrange multiplier used in the AL method, highlighting how important it is for improving algorithm performance when compared to penalty methods. In the final section, the paper presents numerical examples that compare different methods within a unified iterative algorithm, utilizing benchmark Marmousi and 2004 BP salt models.

A smart structural optimization method of magnetorheological damper for ultra-precision machine tool

To address the problem of multi-source vibration in ultra-precision machine tools, a vibration reduction stand was designed by replacing passive damping components with magnetorheological dampers (MRDs). In this work, the structural parameters of MRDs were optimized using an improved pelican optimization algorithm (IPOA) to realize the maximum capability in reducing vibration. Firstly, the working principle of MRDs was explained, and the mathematical models of MRDs were established. Then, an IPOA based on singer chaotic mapping, nonlinear inertia weight factor, and Cauchy mutation strategy was proposed to enhance the global search capability and convergence efficiency of the algorithm. Subsequently, the IPOA was applied to optimize key structural parameters of MRDs, including output damping force, controllable damping range, response time, and power consumption. Finally, COMSOL Multiphysics software was used to verify the effectiveness of the proposed algorithm by comparing the magnetic induction intensity distribution of MRDs before and after optimization, as well as the variation of the four performance indexes under the different applied currents. After being optimized using the proposed IPOA, the MRDs can deliver a larger maximum damping force and a wider damping controllable range, with less power consumption and quick response, which could meet the requirement for vibration suppression of ultra-precision machine tools.

Federated Learning with Pareto Optimality for Resource Efficiency and Fast Model Convergence in Mobile Environments.

Federated learning (FL) is an emerging distributed learning technique through which models can be trained using the data collected by user devices in resource-constrained situations while protecting user privacy. However, FL has three main limitations: First, the parameter server (PS), which aggregates the local models that are trained using local user data, is typically far from users. The large distance may burden the path links between the PS and local nodes, thereby increasing the consumption of the network and computing resources. Second, user device resources are limited, but this aspect is not considered in the training of the local model and transmission of the model parameters. Third, the PS-side links tend to become highly loaded as the number of participating clients increases. The links become congested owing to the large size of model parameters. In this study, we propose a resource-efficient FL scheme. We follow the Pareto optimality concept with the biased client selection to limit client participation, thereby ensuring efficient resource consumption and rapid model convergence. In addition, we propose a hierarchical structure with location-based clustering for device-to-device communication using k-means clustering. Simulation results show that with prate at 0.75, the proposed scheme effectively reduced transmitted and received network traffic by 75.89% and 78.77%, respectively, compared to the FedAvg method. It also achieves faster model convergence compared to other FL mechanisms, such as FedAvg and D2D-FedAvg.

Cooperative decision-making algorithm with efficient convergence for UCAV formation in beyond-visual-range air combat based on multi-agent reinforcement learning

Highly intelligent Unmanned Combat Aerial Vehicle (UCAV) formation is expected to bring out strengths in Beyond-Visual-Range (BVR) air combat. Although Multi-Agent Reinforcement Learning (MARL) shows outstanding performance in cooperative decision-making, it is challenging for existing MARL algorithms to quickly converge to an optimal strategy for UCAV formation in BVR air combat where confrontation is complicated and reward is extremely sparse and delayed. Aiming to solve this problem, this paper proposes an Advantage Highlight Multi-Agent Proximal Policy Optimization (AHMAPPO) algorithm. First, at every step, the AHMAPPO records the degree to which the best formation exceeds the average of formations in parallel environments and carries out additional advantage sampling according to it. Then, the sampling result is introduced into the updating process of the actor network to improve its optimization efficiency. Finally, the simulation results reveal that compared with some state-of-the-art MARL algorithms, the AHMAPPO can obtain a more excellent strategy utilizing fewer sample episodes in the UCAV formation BVR air combat simulation environment built in this paper, which can reflect the critical features of BVR air combat. The AHMAPPO can significantly increase the convergence efficiency of the strategy for UCAV formation in BVR air combat, with a maximum increase of 81.5% relative to other algorithms.

Pushing the Boundaries of Solar Panel Inspection: Elevated Defect Detection with YOLOv7-GX Technology

During the maintenance and management of solar photovoltaic (PV) panels, how to efficiently solve the maintenance difficulties becomes a key challenge that restricts their performance and service life. Aiming at the multi-defect-recognition challenge in PV-panel image analysis, this study innovatively proposes a new algorithm for the defect detection of PV panels incorporating YOLOv7-GX technology. The algorithm first constructs an innovative GhostSlimFPN network architecture by introducing GSConv and depth-wise separable convolution technologies, optimizing the traditional neck network structure. Then, a customized 1 × 1 convolutional module incorporating the GAM (Global Attention Mechanism) attention mechanism is designed in this paper to improve the ELAN structure, aiming to enhance the network’s perception and representation capabilities while controlling the network complexity. In addition, the XIOU loss function is introduced in the study to replace the traditional CIOU loss function, which effectively improves the robustness and convergence efficiency of the model. In the training stage, the sample imbalance problem is effectively solved by implementing differentiated weight allocations for different images and categories, which promotes the balance of the training process. The experimental data show that the optimized model achieves 94.8% in the highest mAP value, which is 6.4% higher than the original YOLOv7 network, significantly better than other existing models, and provides solid theoretical and technical support for further research and application in the field of PV-panel defect detection.

Spatial and temporal variation and convergence in the efficiency of high-standard farmland construction: Evidence in China

To assess the efficiency of high-standard farmland construction (HSFC), this study utilized data spanning from 1998 to 2020 obtained from 30 provinces, autonomous regions, and municipalities in China. This assessment was conducted using a three-stage super-efficient slack-based measure data envelopment analysis(SBM-DEA)model. Furthermore, we investigated the spatial and temporal variances and convergence of HSFC efficiency using the Dagum Gini coefficient and convergence analysis. The results firstly show that from 2007 to 2020, China's HSFC efficiency displayed fluctuations and declines, significantly influenced by environmental and stochastic factors. Secondly, it showed that the gap in China's HSFC efficiency has widened, with super-variable density being demonstrated as the primary source of spatial imbalance in HSFC efficiency. Thirdly, it showed that the deviation in the efficiency of HSFC in the central region of China from the average level has shown a gradually declining trend, while the deviation in the efficiency of HSFC in the national, western, eastern, and northeastern regions has not presented a downward trend. Fourthly, it demonstrated that over time, the efficiency of building high-standard agriculture throughout the nation and its four main areas will converge to the same level.

Maximum Power Point Tracking of Photovoltaic Generation System Using Improved Quantum-Behavior Particle Swarm Optimization.

This study introduces an improved quantum-behavior particle swarm optimization (IQPSO), tailored for the task of maximum power point tracking (MPPT) within photovoltaic generation systems (PGSs). The power stage of the MPPT system comprises a series of buck-boost converters, while the control stage contains a microprocessor executing the biomimetic algorithm. Leveraging the series buck-boost converter, the MPPT system achieves optimal operation at the maximum power point under both ideal ambient conditions and partial shade conditions (PSCs). The proposed IQPSO addresses the premature convergence issue of QPSO, enhancing tracking accuracy and reducing tracking time by estimating the maximum power point and adjusting the probability distribution. Employing exponential decay, IQPSO facilitates a reduction in tracking time, consequently enhancing convergence efficiency and search capability. Through single-peak experiments, multi-peak experiments, irradiance-changing experiments, and full-day experiments, it is demonstrated that the tracking accuracy and tracking time of IQPSO outperform existing biomimetic algorithms, such as the QPSO, firefly algorithm (FA), and PSO.

A Constitutive Model for Stud Connection in Composite Structures

The complexity of finite element analysis for composite structures can be significantly reduced by representing the connector and adjacent concrete as a macroscopic element. Nevertheless, the prevailing macroscopic models for shear connections predominantly employ nonlinear elastic theory. This approach introduces inaccuracies in estimating structural stiffness and load-bearing capabilities, primarily due to its inability to precisely capture the cumulative effects of plastic damage. In response, this study introduces a novel macroscopic elastoplastic model grounded in plasticity theory, aimed at accurately characterizing the nonlinear behavior of stud connections subjected to concurrent shear and tensile forces. This paper meticulously delineates the implementation of the elastoplastic constitutive model using the backward Euler method for numerical integration. It further articulates the derivation of the consistent tangent stiffness, which aligns with the convergence efficiency of the Newton–Raphson iterative approach. The computation of the element stiffness matrix for a two-node element is executed via the governing equation inherent to the finite element method. An exemplar macroelement test conducted in ABAQUS affirms the implicit backward Euler scheme’s stability and consistency across varying tolerances. Validation of the elastoplastic model against empirical test outcomes corroborates its efficacy, demonstrating the model’s precision in predicting the load–displacement behavior of stud connections under the influence of shear and tensile forces.

Adaptive feature selection for active trachoma image classification

Trachoma is a neglected tropical eye disease caused by ocular strains of Chlamydia trachomatis, which affects millions of people worldwide. To examine the eye for signs of active trachoma, healthcare providers typically look for clusters of five or more follicles on the conjunctiva of the upper eyelid for the follicular inflammatory trachoma stage. However, it is also possible to find individual follicles scattered throughout the conjunctiva, particularly in mild or early-stage trachoma cases. Additionally, the datasets are photographic images collected in the field that can be high-dimensional and may contain large amounts of redundant information. We propose integrating novel attention-based feature extraction and feature selection techniques to address these challenges. First, we present the Lambda layer within the Convolutional Block Attention Module (L-CBAM) to normalize attention weights and improve the feature extraction process. Second, we introduce an adaptive mechanism, Adaptive Beta Hill Climbing (AβHC) with Social Ski-Driver (SSD), which adjusts the exploration-exploitation trade-off during the search process, allowing for better exploration of the search space and more efficient convergence toward an optimal feature subset. We then use the multilayer perceptron (MLP) classifier to produce final classification results using selected subsets. We evaluated the proposed approach on active trachoma inverted eyelid images and obtained accuracy scores of 93.3% with only 19.7% of the selected features, surpassing many of the algorithms used for comparison. Our proposed method has demonstrated excellent performance compared to recent works utilizing the same datasets. The source code of this work is available at https://github.com/mshitie2/Active_Trachoma.

Capacity optimization allocation method for off-grid RES-H2 microgrid system considering the load-follow-source mechanism

Based on the uncertainty of the output of renewable energy such as wind and photovoltaic (PV), a capacity optimization allocation method considering the load-follow-source mechanism is proposed to solve the shortages of traditional methods, which is low in utilization rate of energy and low in economy. Firstly, considering the fluctuations of renewable energy sources (RES) and the operating characteristics of the electrolyzer, this paper proposes a capacity optimization method for off-grid hydrogen(H2) production system of renewable energy sources considering the load-follow-source operation mechanism. Then, combined with this mechanism, a capacity optimization allocation model is established, the objectives contain minimizing the levelized cost of hydrogen (LCOH), minimizing the capacity of energy storage, and optimizing the efficiency of power supply. Finally, an adaptive non-dominated sorting differential evolution algorithm (ANSDE) with external archiving is proposed to solve the established model. The calculation results show that the load-follow-source mechanism is effective for improving the economy of the system, and the proposed algorithm is high in efficiency and good in convergence comparing with traditional algorithms.

Theoretical modeling and vibration analysis of composite laminated wing-box structures of hydrogen-electric aircraft under hygrothermal environment

For the sake of achieving the goal of ultra-low or even zero carbon emissions during flight, hydrogen-electric aircraft has been receiving increasing emphasis. Nevertheless, the hydrogen-electric aircraft owns an all-composite fuselage configuration and is subjected hygrothermal environment, which have a significant effect on the aircraft dynamics, especially for wing structure. In this study, an improved orthogonal polynomial solution based on the Rayleigh-Ritz method is developed for the dynamic analysis of composite laminated wing-box structures (CLWBSs) of hydrogen-electric aircraft with humid and hot environment and elastic boundary. In this solution approach, the potential energy, kinetic energy, elastic potential energy and hygrothermal potential energy of CLWBSs are derived from the framework of Kirchhoff thin plate hypothesis. A set of artificial springs is imported to the free edges of CLWBSs to simulate the elastic boundary and connection between two plates. The convergence, accuracy and computational efficiency of the proposed formulation are validated by experiment and finite element analysis. The effect of the coupling parameters and the elastic boundaries due to flexible composite fuselage in hygrothermal environment created by the hydrogen fuel cells are systematically investigated which have been confirmed by theoretical research, finite element analysis and experiment. The related findings indicate that the present approach provided an effective formulation for the vibration analysis and optimization of flexible composite wing-box structures. It can be applied in the field of aerospace and navigation industry at the same time.

Distributed Multi-Area Intraday Economic Dispatch Using Modified Critical Region Projection Algorithm

Convergence acceleration is always a critical issue in distributed multi-area scheduling. The critical region projection (CRP) algorithm based on multi-parametric quadratic programming (MPQP) shows better convergence performance for multi-area static economic dispatch. However, its imperfect decomposition framework cannot be directly applied to dynamic economic dispatch. Therefore, this paper modifies the CRP algorithm to achieve fast distributed multi-area intra-day economic dispatch (MAIDED). First, we introduce slack variables to each area and add the corresponding penalty term into their objective functions to present a primal decomposition framework with penalty relaxation. It is more realistic than the decomposition framework of traditional CRP (TCRP). Then, an iterative algorithm of double spatial scale search (DSSS) is developed to improve the convergence rate of distributed solving based on the similar optimal value function in adjacent critical regions (CRs). Moreover, we design an initial value selection method based on data fitting to further reduce the number of iterations. Finally, three interconnected power systems of different sizes are used for numerical testing to demonstrate that the proposed modified CRP (MCRP) algorithm can meet the practical application and has higher convergence efficiency. <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">Note to Practitioners</i> —This paper is motivated by the problem of distributed MAIDED for power systems but it also applies to other multi-agent networks with a coordinator. The convergence speed of the existing distributed optimization algorithm is slow, which increases the risk of communication failure and attack. Meanwhile, more iterations will result in increased communication and computing costs. This paper modified the TCRP algorithm for high-efficient distributed MAIDED. The penalty relaxation is used to ensure that the decomposition framework is consistent with the actual system operation. The DSSS algorithm and the initial value selection method based on data fitting are designed to effectively reduce the number of iterations. In this paper, the DSSS is that the coordinator enlarges the CRs uploaded from each area to perform a rough optimization for approaching the global optimal solution fast, and then in the next iteration, conducts a precise optimization like the TCRP algorithm to determine the precise optimal solution. The numerical testing of the interconnected power systems of different sizes indicates that the MCRP algorithm has fewer iterations and calculation times than the TCRP algorithm. Future work will extend the MCRP algorithm to solve the distributed multi-area unit commitment problem.

Multi-Strategy Boosted Fick's Law Algorithm for Engineering Optimization Problems and Parameter Estimation.

To address the shortcomings of the recently proposed Fick's Law Algorithm, which is prone to local convergence and poor convergence efficiency, we propose a multi-strategy improved Fick's Law Algorithm (FLAS). The method combines multiple effective strategies, including differential mutation strategy, Gaussian local mutation strategy, interweaving-based comprehensive learning strategy, and seagull update strategy. First, the differential variation strategy is added in the search phase to increase the randomness and expand the search degree of space. Second, by introducing the Gaussian local variation, the search diversity is increased, and the exploration capability and convergence efficiency are further improved. Further, a comprehensive learning strategy that simultaneously updates multiple individual parameters is introduced to improve search diversity and shorten the running time. Finally, the stability of the update is improved by adding a global search mechanism to balance the distribution of molecules on both sides during seagull updates. To test the competitiveness of the algorithms, the exploration and exploitation capability of the proposed FLAS is validated on 23 benchmark functions, and CEC2020 tests. FLAS is compared with other algorithms in seven engineering optimizations such as a reducer, three-bar truss, gear transmission system, piston rod optimization, gas transmission compressor, pressure vessel, and stepped cone pulley. The experimental results verify that FLAS can effectively optimize conventional engineering optimization problems. Finally, the engineering applicability of the FLAS algorithm is further highlighted by analyzing the results of parameter estimation for the solar PV model.

Determination of seawater COD spectra using double-loop contraction and sorted frog optimization.

This study develops a novel double-loop contraction and C value sorting selection-based shrinkage frog-leaping algorithm (double-contractive cognitive random field [DC-CRF]) to mitigate the interference of complex salts and ions in seawater on the ultraviolet-visible (UV-Vis) absorbance spectra for chemical oxygen demand (COD) quantification. The key innovations of DC-CRF are introducing variable importance evaluation via C value to guide wavelength selection and accelerate convergence; a double-loop structure integrating random frog (RF) leaping and contraction attenuation to dynamically balance convergence speed and efficiency. Utilizing seawater samples from Jiaozhou Bay, DC-CRF-partial least squares regression (PLSR) reduced the input variables by 97.5% after 1,600 iterations relative to full-spectrum PLSR, RF-PLSR, and CRF-PLSR. It achieved a test R2 of 0.943 and root mean square error of 1.603, markedly improving prediction accuracy and efficiency. This work demonstrates the efficacy of DC-CRF-PLSR in enhancing UV-Vis spectroscopy for rapid COD analysis in intricate seawater matrices, providing an efficient solution for optimizing seawater spectra.

IoT service composition based on improved Shuffled Frog Leaping Algorithm

In the complex Internet of Things (IoT) environment, a plethora of IoT services with akin functions but varying qualities of service exist. To meet diverse customer needs and drive widespread application, service composition optimization becomes crucial. In the current era of rapid development in artificial intelligence, intelligent algorithms play a significant role in optimizing service composition. However, algorithms applied to IoT service composition optimization face common challenges of low search efficiency and insufficient optimization precision, including the Shuffled Frog Leaping Algorithm (SFLA) and Genetic Algorithm (GA). Therefore, this study seeks to enhance the perception of service quality in IoT service composition. It proposes an improved SFLA (ISFLA) based on the original SFLA. The algorithm integrates chaos theory and reverse learning theory for the acquisition of the initial population. It utilizes Euclidean distance to partition the population into groups and employs Gaussian mutation to optimize the optimal individual of each group. Finally, the entire population undergoes evolution through a local update method based on two strategies. Simulated experiments were conducted to search for optimal IoT service composition solutions of different scales. The results indicate that, compared to the SFLA, GA, ISFLA*, IGSFLA and SFLAGA, ISFLA achieves superior fitness values, better composition solutions, and exhibits faster convergence, higher stability, and greater overall operational efficiency.