Conventional Optical Tweezers Research Articles

Optical trapping and manipulating with a transmissive and polarization-insensitive metalens

Abstract Trapping and manipulating micro-objects and achieving high-precision measurements of tiny forces and displacements are of paramount importance in both physical and biological research. While conventional optical tweezers rely on tightly focused beams generated by bulky microscope systems, the emergence of flat lenses, particularly metalenses, has revolutionized miniature optical tweezers applications. In contrast to traditional objectives, the metalenses can be seamlessly integrated into sample chambers, facilitating flat-optics-based light manipulation. In this study, we propose an experimentally realized transmissive and polarization-insensitive water-immersion metalens, constructed using adaptive nano-antennas. This metalens boasts an ultra-high numerical aperture of 1.28 and achieves a remarkable focusing efficiency of approximately 50 % at a wavelength of 532 nm. Employing this metalens, we successfully demonstrate stable optical trapping, achieving lateral trapping stiffness exceeding 500 pN/(μm W). This stiffness magnitude aligns with that of conventional objectives and surpasses the performance of previously reported flat lenses. Furthermore, our bead steering experiment showcases a lateral manipulation range exceeding 2 μm, including a region of around 0.5 μm exhibiting minimal changes in stiffness for smoothly optical manipulation. We believe that this metalens paves the way for flat-optics-based optical tweezers, simplifying and enhancing optical trapping and manipulation processes, attributing ease of use, reliability, high performance, and compatibility with prevalent optical tweezers applications, including single-molecule and single-cell experiments.

Opto-hydrodynamic tweezers.

Optical fiber tweezers offer a simple, low-cost and portable solution for non-invasive trapping and manipulation of particles. However, single-fiber tweezers require fiber tip modification (tapering, lensing, etc.) and the dual-fiber approach demands strict alignment and positioning of fibers for robust trapping of particles. In addition, both tweezing techniques offer a limited range of particle manipulation and operate in low flow velocity regimes (a few 100 μm s-1) when integrated with microfluidic devices. In this paper, we report a novel opto-hydrodynamic fiber tweezers (OHT) platform that exploits the balance between the hydrodynamic drag force and optical scattering forces to trap and manipulate single or multiple particles of various shapes, sizes, and material compositions in a microfluidic channel. 3D hydrodynamic flow focusing offers an easy and dynamic alignment of the particle trajectories with the optical axis of the fiber, which enables robust trapping of particles with high efficiency of >70% and throughput of 14 particles per minute (operating flow velocity: 1000 μm s-1) without the need for precision stages or complex fabrication. By regulating the optical power and flow rates, we were able to trap single particles at desired positions in the channel with a precision of ±10 μm as well as manipulate them over a long range upstream or downstream with a maximum distance of 500 μm. Our opto-hydrodynamic tweezers offer an alternative to conventional optical fiber tweezers for several applications in physics, biology, medicine, etc.

Determination of Protein Amount in Nanosized Synthetic Liposomes by Surface Effect Raman Spectroscopy (SERS)

Accurate characterization of synthetic liposomes is essential since they give information about the vesicu-lar structures in bodily fluids such as extracellular vesicles. The characterization tasks are generally the determination of the sizes of the liposomes and the profiling of the liposomes' content. Optical tweezers and Surface Enhanced Raman Spectroscopy (SERS) were used to profile the nanosized liposomes. The size distribution of the trapped liposomes (140 nm on average) was found by using Einstein's Brownian motion equation, consistent with the size distribution obtained from dynamic light scattering measure-ments. Besides, Gramicidin-encapsulated liposomes were measured using SERS, and statistically signifi-cant differentiation was found in Raman intensities between liposome populations with altering concentra-tions of proteins. This study uniquely measured size distributions of nano-sized liposomes with conven-tional optical tweezers (without plasmonics) and determined the chemical differences between empty and protein encapsulated liposomes with high accuracy using Raman spectroscopy

Particle trapping with optical nanofibers: a review [Invited

Optical trapping has proven to be an efficient method to control particles, including biological cells, single biological macromolecules, colloidal microparticles, and nanoparticles. Multiple types of particles have been successfully trapped, leading to various applications of optical tweezers ranging from biomedical through physics to material sciences. However, precise manipulation of particles with complex composition or of sizes down to nanometer-scales can be difficult with conventional optical tweezers, and an alternative manipulation tool is desirable. Optical nanofibers, that is, fibers with a waist diameter smaller than the propagating wavelength of light, are ideal candidates for optical manipulation due to their large evanescent field that extends beyond the fiber surface. They have the added advantages of being easily connected to a fibered experimental setup, being simple to fabricate, and providing strong electric field confinement and intense magnitude of evanescent fields at the nanofiber's surface. Many different particles have been trapped, rotated, transported, and assembled with such a system. This article reviews particle trapping using optical nanofibers and highlights some challenges and future potentials of this developing topic.

Capture Dynamics of Dielectric Microparticles in Hollow-Core-Fiber-Based Optical Traps

Optical traps formed in hollow-core fibers (HCFs) can overcome several limitations of conventional free-space optical tweezers. One of the key issues is to load particles from free space into the hollow core with high efficiency, in which process the capture dynamics of the particles in front of the HCF endface plays an important role. In this work, a comprehensive model of the trapping and capture process of the dielectric particles in front of HCF is established by taking into account the features of the fiber modes and the motional parameters of the particles. Stable capture positions are predicted based on analytical calculations of optical forces, and the dependencies of the equilibrium axial trapping position on the beam numerical aperture, the fiber core and particle diameters are provided. In addition, the trajectories and the capture dynamics of the particles are studied by solving the equation of motion for the particles under the impact of optical forces, predicting feasible parameter ranges of the initial amplitude and direction of particle launch velocity for achieving successful particle capture in front of HCF. The results can provide guidance for further improving the particle-loading efficiencies of the HCF-based optical traps, which may find applications of flying particle sensors and long-range particle binding in HCFs.

Investigation of near-field optical tweezers based on the edge effect of extraordinary optical transmission in thin microcavity

Optical tweezers are powerful tools capable to trap and manipulate particles directly. However, using conventional optical tweezers for nanosized objects remains a formidable challenge due to the optical diffraction limits and high-power levels required for nanoscale trapping, which usually causes irreversible damage to the captured particles. In this paper, we investigate the near-field edge effect of thin microcavity due to macroscopic quantum effect, and the highly enhanced electric field can reach 2.4 times. Thus, a dual near-field optical trap potential well is generated at the edge of the thin microcavity. We theoretically show that this near-field potential well can stably capture nanoparticles smaller than 10 nm while keeping the incident optical power level below 100 mW. Besides, the relationship between size of the microcavity and optical gradient force has also been carefully studied. Finally, the theoretical model of near-field optical tweezers with double thin microcavity is established, and the electric field magnitude of the double microcavity model is enhanced by 4.5 times compared with single microcavity model, in which the coupling effect of double hole makes smaller particles be stably trapped. Our research presents a huge potential for optical trapping and separation of nanoparticles and biomolecules.

Optomechanically induced optical trapping system based on photonic crystal cavities.

Optical trapping has proven to be a valuable experimental technique for precisely controlling small dielectric objects. However, due to their very nature, conventional optical traps are diffraction limited and require high intensities to confine the dielectric objects. In this work, we propose a novel optical trap based on dielectric photonic crystal nanobeam cavities, which overcomes the limitations of conventional optical traps by significant factors. This is achieved by exploiting an optomechanically induced backaction mechanism between a dielectric nanoparticle and the cavities. We perform numerical simulations to show that our trap can fully levitate a submicron-scale dielectric particle with a trap width as narrow as 56 nm. It allows for achieving a high trap stiffness, therefore, a high Q-frequency product for the particle's motion while reducing the optical absorption by a factor of 43 compared to the cases for conventional optical tweezers. Moreover, we show that multiple laser tones can be used further to create a complex, dynamic potential landscape with feature sizes well below the diffraction limit. The presented optical trapping system offers new opportunities for precision sensing and fundamental quantum experiments based on levitated particles.

Multimodal Optothermal Manipulations along Various Surfaces.

Optical tweezers have provided tremendous opportunities for fundamental studies and applications in the life sciences, chemistry, and physics by offering contact-free manipulation of small objects. However, it requires sophisticated real-time imaging and feedback systems for conventional optical tweezers to achieve controlled motion of micro/nanoparticles along textured surfaces, which are required for such applications as high-resolution near-field characterizations of cell membranes with nanoparticles as probes. In addition, most optical tweezers systems are limited to single manipulation modes, restricting their broader applications. Herein, we develop an optothermal platform that enables the multimodal manipulation of micro/nanoparticles along various surfaces. Specifically, we achieve the manipulation of micro/nanoparticles through the synergy between the optical and thermal forces, which arise due to the temperature gradient self-generated by the particles absorbing the light. With a simple control of the laser beam, we achieve five switchable working modes [i.e., tweezing, rotating, rolling (toward), rolling (away), and shooting] for the versatile manipulation of both synthesized particles and biological cells along various substrates. More interestingly, we realize the manipulation of micro/nanoparticles on rough surfaces of live worms and their embryos for localized control of biological functions. By enabling the three-dimensional control of micro/nano-objects along various surfaces, including topologically uneven biological tissues, our multimodal optothermal platform will become a powerful tool in life sciences, nanotechnology, and colloidal sciences.

Flexible control of an ultrastable levitated orbital micro-gyroscope through orbital-translational coupling

Abstract Introducing rotational degree of control into conventional optical tweezers promises unprecedented possibilities in physics, optical manipulation, and life science. However, previous rotational schemes have largely relied upon the intrinsic properties of microsphere anisotropy—such as birefringence or amorphous shape—which involves sophisticated fabrication processes and is limited in their application range. In this study, we demonstrated the first experimental realization of orbiting a homogeneous microsphere by exploiting angular momentum in a transversely rotating optical trap. The high level of rotational control allows us to explore orbital-translational coupling and realize an ultra-stable micro-gyroscope of considerable value. The dynamics of orbital levitated particle was theoretically characterized using a simple model. Our proposed method provided a novel way to qualitatively characterize optical trap features. In the future, the approach could pave the way for investigating rotational opto-mechanics, rotational ground state cooling, and the study of ultra-sensitive angular measurement.

Metasurface supporting quasi-BIC for optical trapping and Raman-spectroscopy of biological nanoparticles.

Optical trapping combined with Raman spectroscopy have opened new possibilities for analyzing biological nanoparticles. Conventional optical tweezers have proven successful for trapping of a single or a few particles. However, the method is slow and cannot be used for the smallest particles. Thus, it is not adapted to analyze a large number of nanoparticles, which is necessary to get statistically valid data. Here, we propose quasi-bound states in the continuum (quasi-BICs) in a silicon nitride (Si3N4) metasurface to trap smaller particles and many simultaneously. The quasi-BIC metasurface contains multiple zones with high field-enhancement ('hotspots') at a wavelength of 785 nm, where a single nanoparticle can be trapped at each hotspot. We numerically investigate the optical trapping of a type of biological nanoparticles, namely extracellular vesicles (EVs), and study how their presence influences the resonance behavior of the quasi-BIC. It is found that perturbation theory and a semi-analytical expression give good estimates for the resonance wavelength and minimum of the potential well, as a function of the particle radius. This wavelength is slightly shifted relative to the resonance of the metasurface without trapped particles. The simulations show that the Q-factor can be increased by using a thin metasurface. The thickness of the layer and the asymmetry of the unit cell can thus be used to get a high Q-factor. Our findings show the tight fabrication tolerances necessary to make the metasurface. If these can be overcome, the proposed metasurface can be used for a lab-on-a-chip for mass-analysis of biological nanoparticles.

Lateral recoil optical forces on nanoparticles near nonreciprocal surfaces

We investigate lateral recoil forces exerted on nanoparticles located near plasmonic platforms with in-plane nonreciprocal response. To this purpose, we first develop a comprehensive theoretical framework based on the Lorentz force within the Rayleigh approximation combined with nonreciprocal Green's functions and then derive approximate analytical expressions to model lateral recoil forces, demonstrating their explicit dependence on the dispersion relation of the system and unveiling the mechanisms that govern them. In particular, a dominant lateral recoil force component appears due to the momentum imbalance of nonreciprocal surface plasmons supported by the platform. This force can be orders of magnitude larger than other recoil force components, acts only along or against the direction of the external bias, and is quasi-independent of the direction, polarization, and wavelength of the incident plane wave. Lateral recoil forces are explored using drift-biased graphene metasurfaces, a platform that is also proposed to sort nanoparticles as a function of their size. Nonreciprocal plasmonic systems may enable new venues to trap, bind, and manipulate nanoparticles and to alleviate some of the challenges of conventional optical tweezers.

Intense femtosecond optical pulse shaping approaches to spatiotemporal control.

For studying any event, measurement can never be enough; "control" is required. This means mere passive tracking of the event is insufficient and being able to manipulate it is necessary. To maximize this capability to exert control and manipulate, both spatial and temporal domains need to be jointly accounted for, which has remained an intractable problem at microscopic scales. Simultaneous control of dynamics and position of an observable event requires a holistic combination of spatial and temporal control principles, which gives rise to the field of spatiotemporal control. For this, we present a novel femtosecond pulse-shaping approach. We explain how to achieve spatiotemporal control by spatially manipulating the system through trapping and subsequently or simultaneously exerting temporal control using shaped femtosecond pulses. By leveraging ultrafast femtosecond lasers, the prospect of having temporal control of molecular dynamics increases, and it becomes possible to circumvent the relaxation processes at microscopic timescales. Optical trapping is an exemplary demonstration of spatial control that results in the immobilization of microscopic objects with radiation pressure from a tightly focused laser beam. Conventional single-beam optical tweezers use continuous-wave (CW) lasers for achieving spatial control through photon fluxes, but these lack temporal control knobs. We use a femtosecond high repetition rate (HRR) pulsed laser to bypass this lack of dynamical control in the time domain for optical trapping studies. From a technological viewpoint, the high photon flux requirement of stable optical tweezers necessitates femtosecond pulse shaping at HRR, which has been a barrier until the recent Megahertz pulse shaping developments. Finally, recognizing the theoretical distinction between tweezers with femtosecond pulses and CW lasers is of paramount interest. Non-linear optical (NLO) interactions must be included prima facie to understand pulsed laser tweezers in areas where they excel, like the two-photon-fluorescence-based detection. We show that our theoretical model can holistically address the common drawback of all tweezers. We are able to mitigate the effects of laser-induced heating by balancing this with femtosecond laser-induced NLO effects. An interesting side-product of HRR femtosecond-laser-induced thermal lens is the development of femtosecond thermal lens spectroscopy (FTLS) and its ability to provide sensitive molecular detection.

Optical Trapping of a Single Molecule of Length Sub-1 nm in Solution

Optical Trapping of a Single Molecule of Length Sub-1 nm in Solution

Tunable optical traps over nonreciprocal surfaces.

We propose engineering optical traps over plasmonic surfaces and precisely controlling the trap position with an external bias by inducing in-plane nonreciprocity on the surface. The platform employs an incident Gaussian beam to polarize targeted nanoparticles, and exploits the interplay between nonreciprocal and spin-orbit lateral recoil forces to construct stable optical traps and manipulate their position within the surface. To model this process, we develop a theoretical framework based on the Lorentz force combined with nonreciprocal Green's functions and apply it to calculate the trapping potential. Rooted on this formalism, we explore the exciting possibilities offered by graphene to engineer stable optical traps using low-power laser beams in the mid-IR and to manipulate the trap position in a continuous manner by applying a longitudinal drift bias. Nonreciprocal metasurfaces may open new possibilities to trap, assemble and manipulate nanoparticles and overcome many challenges faced by conventional optical tweezers while dealing with nanoscale objects.

Combined single/dual fiber optical trapping for flexible particle manipulation

Fiber-based optical tweezers have attracted increasing attention as a more flexible tool over conventional lens-based optical tweezers for particle manipulation. Stable trapping can be realized by single fiber gradient force, or dual fiber counter-propagating scattering forces. Both trapping modes and systems are often separately built and researched. In this paper, we demonstrate a combined single/dual fiber optical trapping (SD-FOT) system which allows dual trapping modes (i.e., single fiber gradient mode and dual fiber scattering mode) to be realized simultaneously in a single setup. Two tapered single fibers were used, with each fiber first captures a single microsphere near its tip by focus-induced gradient force; The two fibers (with trapped particles) were then aligned and adjusted to allow additional particles to be trapped and manipulated in the middle by the dual-fiber scattering trapping scheme. At least three particles will be trapped and manipulated by the combined trapping system, and each of particle can be used for in-situ experimental activity and analysis. Meanwhile, theoretical modeling of the optical force was established to quantify both trapping processes, and the process of the particle movement in the experiment is in accordance with the simulated force field. The developed system offers new possibilities in comparative research of single and dual fiber trapped objects and will find important applications in microsphere-based super-resolution imaging and others.

Optical manipulation with metamaterial structures

Optical tweezers employing forces produced by light underpin important manipulation tools employed in numerous areas of applied and biological physics. Conventional optical tweezers are widely based on refractive optics, and they require excessive auxiliary optical elements to reshape both amplitude and phase, as well as wavevector and angular momentum of light, and thus impose limitations on the overall cost and integration of optical systems. Metamaterials can provide both electric and optically induced magnetic responses in subwavelength optical structures, and they are highly beneficial to achieve unprecedented control of light required for many applications and can open new opportunities for optical manipulation. Here, we review the recent advances in the field of optical manipulation employing the physics and concepts of metamaterials and demonstrate that metamaterial structures could not only help to advance classical operations such as trapping, transporting, and sorting of particles, but they can uncover exotic optical forces such as pulling and lateral forces. In addition, apart from optical manipulation of particles (that can also be called “meta-tweezers”), metamaterials can be powered dynamically by light to realize ingenious “meta-robots.” This review culminates with an outlook discussing future novel opportunities in this recently emerged field ranging from enhanced particle manipulation to meta-robot actuation.

Programmable Multimodal Optothermal Manipulation of Synthetic Particles and Biological Cells.

Optical manipulation of tiny objects has benefited many research areas ranging from physics to biology to micro/nanorobotics. However, limited manipulation modes, intense lasers with complex optics, and applicability to limited materials and geometries of objects restrict the broader uses of conventional optical tweezers. Herein, we develop an optothermal platform that enables the versatile manipulation of synthetic micro/nanoparticles and live cells using an ultralow-power laser beam and a simple optical setup. Five working modes (i.e., printing, tweezing, rotating, rolling, and shooting) have been achieved and can be switched on demand through computer programming. By incorporating a feedback control system into the platform, we realize programmable multimodal control of micro/nanoparticles, enabling autonomous micro/nanorobots in complex environments. Moreover, we demonstrate in situ three-dimensional single-cell surface characterizations through the multimodal optothermal manipulation of live cells. This programmable multimodal optothermal platform will contribute to diverse fundamental studies and applications in cellular biology, nanotechnology, robotics, and photonics.

Dexterous holographic trapping of dark-seeking particles with Zernike holograms.

The intensity distribution of a holographically-projected optical trap can be tailored to the physical properties of the particles it is intended to trap. Dynamic optimization is especially desirable for manipulating dark-seeking particles that are repelled by conventional optical tweezers, and even more so when dark-seeking particles coexist in the same system as light-seeking particles. We address the need for dexterous manipulation of dark-seeking particles by introducing a class of "dark" traps created from the superposition of two out-of-phase Gaussian modes with different waist diameters. Interference in the difference-of-Gaussians (DoG) trap creates a dark central core that is completely surrounded by light and therefore can trap dark-seeking particles rigidly in three dimensions. DoG traps can be combined with conventional optical tweezers and other types of traps for use in heterogeneous samples. The ideal hologram for a DoG trap being purely real-valued, we introduce a general method based on the Zernike phase-contrast principle to project real-valued holograms with the phase-only diffractive optical elements used in standard holographic optical trapping systems. We demonstrate the capabilities of DoG traps (and Zernike holograms) through experimental studies on high-index, low-index and absorbing colloidal particles dispersed in fluid media.

Polarization-Dependent Plasmonic Nano-Tweezer as a Platform for On-Chip Trapping and Manipulation of Virus-Like Particles.

Plasmonics advanced materials with the capability of environmental variation detection extend the application of visible light, satisfying the demands of less footprint, easy-to-use, and high tunability for visible-sensitive materials. In this area, localized surface plasmon can significantly enhance the electric field smaller than the radiation wavelength providing a strong gradient force required in optical tweezing systems. Owing to this beneficial advantage over the conventional optical tweezers, the plasmonic tweezers have matured to a stage where today become increasingly attractive for trapping and manipulation of nanoparticles. In this work, we are proposing a tunable plasmonic nano-tweezer that operates according to the polarization of excitation laser light. The proposed novel structure encompasses a gold nano-ring and a gold nano-disk in which by changing the beam polarization, the hot spots position also changes, and the nanoparticles can be relocated around the circumference of a circle trapped at a certain point. According to 3D finite-difference-time-domain simulations, the proposed nano-tweezing system can potentially exert a trapping force of 164 pNW-1 on a 20 nm HIV-1 virus-like particle.

Ring-shaped photoacoustic tweezers for single particle manipulation.

This Letter reports ring-shaped photoacoustic (PA) tweezers that are capable of manipulating single or multiple micron-sized particles. By illuminating a thin layer of an optically absorptive liquid medium with a focused annular pulsed laser beam and a higher pulse repetition rate (e.g., 800 Hz), both acoustic radiation force and instantaneous vaporization repulsion are generated within a certain distance of the illumination region. This makes it possible to conduct continuous and versatile locomotion of single or multiple microparticles. In this Letter, interactions between two or more particles are demonstrated, such as separation, attachment, and grouping of microparticles. The PA tweezers combine some of the advantages of conventional optical and acoustic tweezers and are expected to be a useful alternative approach for the manipulation of microscale objects.