Conventional Freehand Technique Research Articles

Neuro Navigation Versus Conventional Spinal Techniques in Analyzing Nerve Injury and Anatomical Accuracy: A Systematic Review.

Neuronavigation, a computer-assisted surgical technique, enhances the accuracy of spinal surgery by using medical imaging to guide the surgeon's instruments. This method mitigates the serious complications of screw misplacement, such as dural tears, nerve damage, vascular injuries, and internal organ damage, by integrating pre-operative imaging data with real-time intraoperative sensor readings. Because of this integration, it is possible to visualize the spine in three dimensions, guaranteeing accurate instrument placement and greatly lowering the risk of complications. Despite its growing popularity, the benefits of neuronavigation in spinal instrumentation are debated. While some studies report improved accuracy in pedicle screw placement, others find no significant difference compared to conventional freehand techniques. Further research is required to determine the long-term benefits of neuronavigation, including its impact on patient outcomes, like reduced pain and improved function. This systematic review will evaluate the evidence on the risks and benefits of neuronavigation in spinal instrumentation surgery, compared to conventional techniques.

Influence of augmented reality technique on the accuracy of autotransplanted teeth in surgically created sockets

BackgroundThe objective of the present study was to evaluate the reliability of an augmented reality drilling approach and a freehand drilling technique for the autotransplantation of single-rooted teeth. Materials and methodsForty samples were assigned to the following surgical techniques for drilling guidance of the artificial sockets: A. augmented reality technique (AR) (n = 20) and B. conventional free-hand technique (FT) (n = 20). Then, two models with 10 teeth each were submitted to a preoperative cone-beam computed tomography (CBCT) scan and a digital impression by a 3D intraoral scan. Afterwards, the autotrasplanted teeth were planned in a 3D dental implant planning software and transferred to the augmented reality device. Then, a postoperative CBCT scan was performed. Data sets from postoperative CBCT scans were aligned to the planning in the 3D implant planning software to analize the coronal, apical and angular deviations. Student’s t-test and Mann–Whitney non-parametric statistical analysis were used to analyze the results.ResultsNo statistically significant differences were shown at coronal (p = 0.123) and angular (p = 0.340) level; however, apical deviations between AR and FT study groups (p = 0.008) were statistically significant different.ConclusionThe augmented reality appliance provides higher accuracy in the positioning of single-root autotransplanted teeth compared to the conventional free-hand technique.

Top 25 Most-Cited Articles on Robotic-Assisted Lumbar Spine Surgery.

Robot-guided lumbar spine surgery has evolved rapidly with evidence to support its utility and feasibility compared with conventional freehand and fluoroscopy-based techniques. The objective of this study was to assess trends among the top 25 most-cited articles pertaining to robotic-guided lumbar spine surgery. An "advanced document search" using Boolean search operator terms was performed on 16 November 2022 through the Web of Science and SCOPUS citation databases to determine the top 25 most-referenced articles on robotic lumbar spine surgery. The articles were compiled into a directory and hierarchically organized based on the total number of citations. Cumulatively, the "Top 25" list for robot-assisted navigation in lumbar spine surgery received 2240 citations, averaging 97.39 citations annually. The number of citations ranged from 221 to 40 for the 25 most-cited articles. The most-cited study, by Kantelhardt et al, received 221 citations, averaging 18 citations per year. As utilization of robot-guided modalities in lumbar spine surgery increases, this review highlights the most impactful studies to support its efficacy and implementation. Practical considerations such as cost-effectiveness, however, need to be better defined through further longitudinal studies that evaluate patient-reported outcomes and cost-utility. Through an overview of the top 25 most-cited articles, the present review highlights the rising prominence and technical efficacy of robotic-guided systems within lumbar spine surgery, with consideration to pragmatic limitations and need for additional data to facilitate cost-effective applications.

Removal of fiber posts using conventional versus guided endodontics: a comparative study of dentin loss and complications.

To compare the efficacy of fiber post removal using conventional (CONV) versus guided endodontics (GE) in terms of dentin loss, residual resin material, procedural errors, and working time in vitro. Ninety human central incisors were root-filled and scanned by micro-computed tomography (CT), then restored with fiber posts and composite. Twenty-four sets of teeth with up to four human maxillary central incisors were fabricated and divided into three groups: conventional post removal by a general dentist (CG) or endodontology specialist (CS) and guided endodontics (GE) by a general dentist, yielding 30 teeth per operator and group. After treatment, the prepared access cavities were volumetrically assessed by micro-CT. Statistical significance was evaluated by one-way analysis of variance followed by post hoc comparisons with Tukey's HSD test and Pearson's chi-squared test for independence. Both CONV and GE resulted in dentin loss and residual resin material. CS resulted in more dentin loss and less residual resin material than CG and GE (p < .05). All groups had some deviations from the original root canal but no perforations. The shortest working time was observed in the GE group. Compared to the conventional freehand technique, GE resulted in significantly less radicular dentin loss, a few deviations but no perforations. Guided endodontics can improve the speed and safety of fiber post removal without root perforation.

Safety and Accuracy of Robot-Assisted Cervical Screw Placement: A Systematic Review and Meta-Analysis

The purpose of this study was to compare the accuracy and safety of robot-assisted (RA) cervical screw placement with conventional freehand (FH) technique. Computer-based searches were conducted on various databases including PubMed, Embase, Cochrane Library, Web of Science, the China Biology Medicine, the China National Knowledge Infrastructure, and Wanfang Database. Inclusion criteria were studies reporting the use of RA techniques for cervical screw placement and providing data on safety and accuracy outcomes. Primary outcome indicators focused on the accuracy of screw placement, while secondary outcome indicators included operative time, intraoperative blood loss, length of hospital stay, complication rate, and radiation dose. Data from eligible studies were extracted and synthesized using a forest plot analysis. A total of 312 patients (1233 screws) from 6 studies were included, with 148 patients (47.4% with 567 screws) in the RA group. Perfect screw accuracy, as categorized by Gertzbein-Robbins grade A, was significantly superior with RA surgery compared to FH technique. RA screw implantation significantly reduced complication rates, intraoperative blood loss, length of hospitalization, and radiation dose compared to the conventional FH group. However, there was no statistically significant difference in surgery time between the RA and FH groups. RA surgery significantly improves the accuracy of cervical screw insertion and offers potential advantages in terms of reduced complications and blood loss, shorter hospital stays, and decreased radiation exposure. However, the impact on operative time remains uncertain. Further high-quality studies, including large-scale randomized controlled trials, are needed to strengthen the evidence base.

Robot-navigated pedicle screw insertion can reduce intraoperative blood loss and length of hospital stay: analysis of 1,633 patients utilizing propensity score matching

Background contextNavigation and robotic technologies have emerged as an alternative option to conventional freehand techniques for pedicle screw insertion. However, the effectiveness of these technologies in reducing the perioperative complications of spinal fusion surgery remains limited due to the small cohort size in the existing literature. PurposeTo investigate whether utilization of robotically navigated pedicle screw insertion can reduce the perioperative complications of spinal fusion surgery—including reoperations—with a sizeable cohort. Study DesignRetrospective study. Patient SamplePatients who underwent primary lumbar fusion surgery between 2019 and 2022. Outcome measuresPerioperative complications including readmission, reoperation, its reasons, estimated blood loss, operative time, and length of hospital stay. MethodsPatients’ data were collected including age, sex, race, body mass index, upper-instrumented vertebra, lower-instrumented vertebra, number of screws inserted, and primary procedure name. Patients were classified into the following two groups: freehand group and robot group. The variable-ratio greedy matching was utilized to create the matched cohorts by propensity score and compared the outcomes between the two group. ResultsA total of 1,633 patients who underwent primary instrumented spinal lumbar fusion surgery were initially identified (freehand 1,286; robot 347). After variable ratio matching was performed with age, sex, body mass index, fused levels, and upper instrumented vertebrae level, 694 patients in the freehand group and 347 patients in robot groups were selected. The robot group showed less estimated blood loss (418.9±398.9 vs 199.2±239.6 ml; p<.001), shorter LOS (4.1±3.1 vs 3.2±3.0 days; p<.001) and similar operative time (212.5 vs 222.0 minutes; p=.151). Otherwise, there was no significant difference in readmission rate (3.6% vs 2.6%; p=.498), reoperation rate (3.2% vs 2.6%; p=.498), and screw malposition requiring reoperation (five cases, 0.7% vs one case, 0.3%; p=1.000). ConclusionSPerioperative complications requiring readmission and reoperation were similar between fluoroscopy guided freehand and robotic surgery. Robot-guided pedicle screw insertion can enhance surgical efficiency by reducing intraoperative blood loss and length of hospital stay without extending operative time.

Supraspinous ligament arc tangent guided freehand thoracic pedicle screw insertion technique: high parallelism between screws and upper endplate.

To propose a technique for placing pedicle screws in the thoracic spine using the Supraspinous ligament Arc Tangent (SLAT) as a guide to increase the safety and stability of screw placement. A retrospective analysis of postoperative anteroposterior and lateral x-ray images was performed for 118 patients with thoracic spine diseases who received conventional freehand technique from January 2016 to May 2020 and SLAT-guided technique since June 2020 to present. The diagnoses included thoracic spinal stenosis, deformity, fractures, infections, and tumors. The angle between the screw and the upper endplate was categorized as grade 1 (0°-5°), grade 2 (5°-10°), and grade 3 (>10°). Three surgeons with more than 10 years of experience in spinal surgery measured the angle between the screw and the upper endplate in the lateral view. Chi-square test was used for statistical analysis, and p < 0.05 was considered statistically significant. A total of 1315 pedicle screws were placed from T1 to T12 in all patients. In the conventional freehand technique group, 549 screws were grade 1, 35 screws were grade 2, and 23 screws were grade 3. In the SLAT-guided freehand technique group, 685 screws were grade 1, 15 screws were grade 2, and 8 screws were grade 3. The data of each group was p < 0.05 by Chi-squared test, which was statistically significant, indicating that the SLAT-guided freehand technique resulted in a higher rate of parallelism between the screws and the upper endplate. All patients underwent intraoperative neurophysiological monitoring, immediate postoperative neurological examination, postoperative x-ray examination, and assess the eventual recovery. The screws were safe and stable, and no complications related to pedicle screw placement were found. The SLAT-guided freehand technique for placing pedicle screws in the thoracic spine can achieve a higher rate of screw-upper endplate parallelism, making screw placement safer and more accurate. Our method provides a convenient and reliable technique for most spinal surgeons, allowing for increased accuracy and safety with less fluoroscopic guidance.

Comparative analysis of two navigation techniques based on augmented reality technology for the orthodontic mini-implants placement

To analyze and compare the accuracy and root contact prevalence, comparing a conventional freehand technique and two navigation techniques based on augmented reality technology for the orthodontic self-drilling mini-implants placement. Methods Two hundred and seven orthodontic self-drilling mini-implants were placed using either a conventional freehand technique (FHT) and two navigation techniques based on augmented reality technology (AR TOOTH and AR SCREWS). Accuracy across different dental sectors was also analyzed. CBCT and intraoral scans were taken both prior to and following orthodontic self-drilling mini-implants placement. The deviation angle and horizontal were then analyzed; these measurements were taken at the coronal entry point and apical endpoint between the planned and performed orthodontic self-drilling mini-implants. In addition, any complications resulting from mini-implant placement, such as spot perforations, were also analyzed across all dental sectors.Results The statistical analysis showed significant differences between study groups with regard to the coronal entry-point (p < 0.001), apical end-point(p < 0.001) and angular deviations (p < 0.001). Furthermore, statistically significant differences were shown between the orthodontic self-drilling mini-implants placement site at the coronal entry-point (p < 0.0001) and apical end-point (p < 0.001). Additionally, eight root perforations were observed in the FHT group, while there were no root perforations in the two navigation techniques based on augmented reality technology.Conclusions The navigation techniques based on augmented reality technology has an effect on the accuracy of orthodontic self-drilling mini-implants placement and results in fewer intraoperative complications, comparing to the conventional free-hand technique. The AR TOOTH augmented reality technique showed more accurate results between planned and placed orthodontic self-drilling mini-implants, comparing to the AR SCREWS and conventional free-hand techniques. The navigation techniques based on augmented reality technology showed fewer intraoperative complications, comparing to the conventional free-hand technique.

Systematic review and network meta-analysis of the accuracy of the orthodontic mini-implants placed in the inter-radicular space by image-guided-based techniques

ObjectiveThe aim of the present systematic review and network meta-analysis (NMA) is to analyze the accuracy of image-guided-based orthodontic mini-implants placement techniques in the inter-radicular space.MethodsThe study was conducted under the PRISMA recommendations. Three databases were searched up to July 2022. In vitro randomized experimental trials (RETs) including static computer-aided implant surgery (s-CAIS), mixed reality (MR), soft tissue static computer-aided implant surgery (ST s-CAIS) and conventional free-hand technique (FHT) for the orthodontic mini-implants placement in the inter-radicular space were selected. The risk of bias was assessed using the Current Research Information System scale. A random effects model was used in the NMA. Direct comparisons were combined with a random effects model in a frequentist NMA to estimate indirect comparisons, and the estimated effect size of the comparisons between techniques were analyzed by difference of means. Inconsistency was assessed with the Q test, with a significance level of p < 0.05, and a net heat plot.ResultsA total of 92 articles was identified, and 8 RETs (8 direct comparisons of 4 techniques) were included in the NMA, which examined 4 orthodontic mini-implants placement techniques: s-CAIS, MR, ST s-CAIS, and FHT. Taking FHT as reference, s-CAIS and ST s-CAIS showed statistically significant coronal and apical deviation. In addition, s-CAIS showed statistically significant angular deviation. However, MR did not show statistically significant differences with respect to FHT, which presented the highest p-score. At the coronal deviation, ST s-CAIS presented the highest P-score (0.862), followed by s-CAIS (0.721). At the apical deviation, s-CAIS presented the highest P-score (0.844), followed by ST s-CAIS (0.791). Finally, at the angular deviation s-CAIS presented again the highest P-score (0.851).ConclusionsWithin the limitations of this study, it was found that the image-guided-based orthodontic mini-implants placement techniques showed more accuracy than the free-hand conventional placement technique; specially the computer-aided static navigation techniques for the orthodontic mini-implants placed in the inter-radicular space.

Computer Assisted Surgery Versus Conventional Free hand Technique In Mandibular Resection and Reconstruction

Computer Assisted Surgery Versus Conventional Free hand Technique In Mandibular Resection and Reconstruction

Cone Beam Computed Tomography-Based Evaluation of the Accuracy of Implant Surgery with Conventional (Free Hand) Implant Placement vs Computer Fabricated 3D Guide Implant Placement.

Dental implants have been used in a variety of conventional technique-based forms for many years which had its own drawbacks. With the advent of cone beam CT, proper surgical and prosthetic planning is possible now a days. To achieve ideal implant placement, good prosthetic fabrication and overall successful prognosis computer fabricated guide aided surgery have been developed. The aim of this study was to compare and evaluate the accuracy of implant placement in partially edentulous patients with conventional free hand technique and computer fabricated guide of implant placement by comparing pre- and post-CBCT data. The present split mouth study design was conducted with forty sample size on twenty randomly selected patients who were treated with bilateral partially edentulous sites requiring dental implants. Patients were treated with both conventional (free hand) technique and computer fabricated 3D guide aided technique of implant placement. Comparison of accuracy of implant placement was done by comparing the pre- and postoperative CBCT data in terms of mean coronal deviation, mean apical deviation and mean angular deviation. The results showed that there is no statistically significant difference between mean coronal deviation, mean apical deviation and mean angular deviation of planned and placed implants in both conventional technique (free hand technique) and computer fabricated 3D guide aided implant placement technique. Hence, this study concluded that conventional technique of implant placement is equally efficient in comparison with computer fabricated guide aided surgery in terms of accuracy of implant placement.

Accuracies of various types of spinal robot in robot-assisted pedicle screw insertion: a Bayesian network meta-analysis

BackgroundWith the popularization of robot-assisted spinal surgeries, it is still uncertain whether robots with different designs could lead to different results in the accuracy of pedicle screw placement. This study aimed to compare the pedicle screw inserting accuracies among the spinal surgeries assisted by various types of robot and estimate the rank probability of each robot-assisted operative technique involved.MethodsThe electronic literature database of PubMed, Web of Science, EMBASE, CNKI, WANFANG and the Cochrane Library was searched in November 2021. The primary outcome was the Gertzbein–Robbins classification of pedicle screws inserted with various operative techniques. After the data extraction and direct meta-analysis process, a network model was established in the Bayesian framework and further analyses were carried out.ResultsAmong all the 15 eligible RCTs, 4 types of robot device, namely Orthbot, Renaissance, SpineAssist and TiRobot, were included in this study. In the network meta-analysis, the Orthbot group (RR 0.27, 95% CI 0.13–0.58), the Renaissance group (RR 0.33, 95% CI 0.14–0.86), the SpineAssist group (RR 0.14, 95% CI 0.06–0.34) and the conventional surgery group (RR 0.21, 95% CI 0.13–0.31) were inferior to the TiRobot group in the proportion of grade A pedicle screws. Moreover, the results of rank probabilities revealed that in terms of accuracy, the highest-ranked robot was TiRobot, followed by Renaissance and Orthbot.ConclusionsIn general, current RCT evidence indicates that TiRobot has an advantage in the accuracy of the pedicle screw placement, while there is no significant difference among the Orthbot-assisted technique, the Renaissance-assisted technique, the conventional freehand technique, and the SpineAssist-assisted technique in accuracy.

No benefits of knee osteotomy patient's specific instrumentation in experienced surgeon hands.

To compare the clinical and radiological outcomes of patient-specific instrumentation (PSI) with the conventional free hand (FH) technique in performing coronal plane corrective knee osteotomies in terms of limb alignment and functional scores. The hypothesis is that conventional FH technique in experienced hands with proper pre-operative planning is as precise as PSI. Patients who underwent coronal plane corrective knee osteotomies with either PSI or FH technique between 2017 and 2019 by the same senior surgeon and have a minimum of 2years follow-up period were included in this study. A total of 91 knees (84 patients) with mean age of 42.9 ± 12.5years who had a pre- and post-operative complete weight-bearing radiographic work-up (50 of them were performed with the FH technique and 41 by means of PSI) were included for comparison. The data were retrospectively reviewed both radiologically and clinically using the Knee Injury and Osteoarthritis Outcome Score (KOOS) sub-scores. All cases in both groups were evaluated for the following measurements: hip-knee-ankle (HKA), medial proximal tibial angle (MPTA), mechanical lateral distal femoral angle (mLDFA), and joint line convergence angle (JLCA) both preoperatively and postoperatively. In addition, FH and PSI osteotomy cases were also compared for their precision in achieving the target correction that was planned preoperatively. All cases were also evaluated clinically preoperatively and at 2-year follow-up using KOOS sub-scores and the two groups were compared. The mean HKA precision was 1.5 ± 0.9 in FH group and 1.3 ± 0.7 in PSI (P value = n.s.), the mean MPTA precision was 1.6 ± 1.6 in FH group and 2.1 ± 1.2 in PSI (P value = n.s.), the mean m-LDFA precision was 1.9 ± 1.7 in FH group and 1.4 ± 1.3 in PSI (P value = n.s.), and the mean JLCA precision in the FH group was 1.5 ± 1.2 and 1.7 ± 1.2 in PSI (P value = n.s.). For all the radiographic parameters, there were no statistically significant differences between the target correction and the obtained correction in both groups. Moreover, PSI and FH techniques were comparable in terms of clinical outcomes and no significant difference was found between the two groups in any of the 2-year follow-up KOOS sub-scores. Conventional FH method in the hands of experienced surgeons is as precise as PSI in reliably achieving the planned correction in different coronal plane knee corrective osteotomies. Moreover, there was also no difference between both methods in the 2-year clinical outcome scores.

Accuracy of Endodontic Access Cavities Performed Using an Augmented Reality Appliance: An In Vitro Study.

Introduction: The purpose of this study was to compare and contrast the accuracy of endodontic access cavities created using an augmented reality appliance to those performed using the conventional technique. Materials and Methods: 60 single-rooted anterior teeth were chosen for study and randomly divided between two study groups: Group A—endodontic access cavities created using an augmented reality appliance as a guide (n = 30) (AR); and Group B—endodontic access cavities performed with the manual (freehand) technique (n = 30) (MN). A 3D implant planning software was used to plan the endodontic access cavities for the AR group, with a cone-beam computed tomography (CBCT) and 3D intraoral surface scan taken preoperatively and subsequently transferred to the augmented reality device. A second CBCT scan was taken after performing the endodontic access cavities to compare the planned and performed endodontic access for accuracy. Therapeutic planning software and Student’s t-test were used to analyze the cavities at the apical, coronal, and angular levels. The repeatability and reproducibility of the digital measurement technique were analyzed using Gage R&R statistical analysis. Results: The paired t-test found statistically significant differences between the study groups at the coronal (p = 0.0029) and apical (p = 0.0063) levels; no statistically significant differences were found between the AR and MN groups at the angular (p = 0.6596) level. Conclusions: Augmented reality devices enable the safer and more accurate performance of endodontic access cavities when compared with the conventional freehand technique.

Does machine-vision-assisted dynamic navigation improve the accuracy of digitally planned prosthetically guided immediate implant placement? A randomized controlled trial.

This randomized controlled clinical trial was designed to compare the accuracy of machine-vision (MV)-based dynamic navigation (DN)-assisted immediate implant placement with the conventional freehand technique. A total of 24 subjects requiring immediate implant placement in maxillary anterior teeth were randomly assigned to either the control (freehand by an experienced surgeon, n=12) or the test group (MV-DN, n=12). Implant platform, implant apex, angular, and depth deviations with respect to prosthetically guided digital planning and differences in implant insertion torque (ITV) and implant stability quotient (ISQ) were compared between the groups. MV-DN resulted in more accurate immediate implant position: significantly smaller global platform deviation (1.01 ± 0.41 mm vs. 1.51 ± 0.67 mm, p=.038), platform depth deviation (0.44 ± 0.46 mm vs. 0.95 ± 0.68 mm, p=.045), global apex deviation (0.88 ± 0.43 mm vs. 1.94 ± 0.86 mm, p=.001), and lateral apex deviation (0.68 ± 0.30 mm vs. 1.61 ± 0.88 mm, p=.004) were found in MV-DN compared to controls. No significant intergroup differences were observed for ITV and ISQ. MV-DN achieved more precise immediate implant position and comparable primary stability. Further trials are necessary to assess the benefits in terms of esthetics and tissue health/stability.

Accuracy of Dynamic Navigation for Non-Surgical Endodontic Treatment: A Systematic Review.

In recent years, the application of Guided Endodontics has gained interest for non-surgical endodontic treatment and retreatment. The newest research focuses on the accuracy of Dynamic Navigation (DN). This article systematically reviewed existing data on the accuracy of non-surgical endodontic treatment procedures that were completed using DN. Following the PRISMA criteria, an electronic database search was conducted in PubMed, Web of Science, Scopus, and Cochrane Library. Studies comparing the accuracy of non-surgical endodontic treatment using DN and the conventional freehand technique were eligible. The literature search resulted in 176 preliminary records. After the selection process six studies were included. The risk of bias was evaluated using the modified Cochrane Collaboration Risk of Bias 2.0 tool. Five studies examined the aid of DN for planning and executing endodontic access cavities, and one for fiber post removal. In two studies, endodontic access cavities were performed in teeth with pulp canal obliteration. The main outcomes that were measured in the included studies were preparation time, global coronal entry point and apical endpoint deviations, angular deviation, tooth substance loss, qualitative precision, number of unsuccessful attempts or procedural mishaps. The risk of bias was rated from low to raising some concerns. Overall, DN showed increased accuracy compared to the freehanded technique and could be especially helpful in treating highly difficult endodontic cases. Clinical studies are needed to confirm the published in vitro data.

Clinical Outcomes and Cost Analysis of Fibula Free Flaps: A Retrospective Comparison of CAD/CAM versus Conventional Technique

Simple SummaryCurrent planning techniques, including computer-aided design/computer-aided manufacturing (CAD/CAM), offer ways to plan reconstructive surgery that optimize aesthetic outcomes and functional rehabilitation. In addition, the use of these techniques promotes safety and reduces the duration of operations. This study compares both the cost of CAD/CAM technology and the clinical results with those of the conventional technique in remodeling the fibula for mandibular reconstruction.(1) Background: A decrease in operative time can not only improve patient outcomes through a reduction in the risk of developing complications but can also result in cost savings. The aim of this study is to determine whether there an intraoperative time gain can be achieved by using the preoperative virtual planning of mandibular reconstruction using a free fibula flap compared with freehand plate bending and osteotomies. (2) Methods: A retrospective comparative study was carried out in the Oral and Maxillofacial Department of La Paz University Hospital, Madrid, Spain. The study compared 18 patients in the CAD/CAM group with 19 patients in the conventional freehand group. A comparison was made between the total surgical time, the comorbidities, and the hospital stay. The resource consumption was estimated using a cost analysis. (3) Results: Although CAD/CAM was a statistically more expensive procedure in the perioperative phase, no significant differences were observed in total health care costs between the two groups. There was a non-significant trend towards an increase in complications with conventional reconstruction plates compared to patient-specific plates (PSI). (4) Conclusions: CAD/CAM technology and a 3D printed cutting guide offer a significantly shorter surgical time, which is associated with a reduction in hospital days, PACU days, and complications. The cost of CAD/CAM technology is comparable to that of the conventional freehand technique.

Association of robot-assisted techniques with the accuracy rates of pedicle screw placement: A network pooling analysis

SummaryBackgroundTraditional paired meta-analyses have yielded inconsistent results for the safety and effectiveness of robotic-assisted pedicle screw placement due to the high heterogeneity within studies. This study evaluated the clinical effectiveness and safety of robotic-assisted pedicle screw placement.MethodsThe Embase, PubMed, and Cochrane Library databases were searched with no language limitations from inception to Jan 4, 2022. Odds ratio (OR), mean difference (MD), and 95% confidence interval (CI) were used to report results. The main outcomes were accuracy of pedicle screw placement, proximal facet joint violation, and complications. The study protocol was published in PROSPERO (CRD42022301417).Findings26 trials including 2046 participants evaluating robotic-assisted pedicle screw placement were included in this study. Our pooled results showed that Renaissance (OR 2.86; [95% CI 1.79 to 4.57]) and TiRobot (OR 3.10; [95% CI 2.19 to 4.40]) yielded higher rates of perfect pedicle screw insertion (Grades A) than the conventional freehand technique. Renaissance (OR 2.82; [95% CI 1.51 to 5.25]) and TiRobot (OR 4.58; [95% CI 2.65 to 7.89]) yielded higher rates of clinically acceptable pedicle screw insertion (Grades A+B). However, ROSA, SpineAssist, and Orthobot were not associated with higher perfect pedicle screw insertion and clinically acceptable pedicle screw insertion rates. Robot-assisted techniques were associated with low rates of proximal facet joint violation (OR 0.18; [95% CI 0.10 to 0.32]; I2:9.55%) and overall complications (OR 0.38; [95% CI 0.23 to 0.63]; I2:27.05%). Moreover, robot-assisted techniques were associated with lower radiation doses (MD –14.38; [95% CI –25.62 to –3.13]; I2:100.00%).InterpretationOur findings suggest that only Renaissance and TiRobot systems are associated with high accuracy rates of pedicle screw placement. Robotic-assisted techniques hold great promise in spinal surgery due to their safety and effectiveness.FundingThis work was supported by grants from the National Natural Science Foundation of China (No. 81871818), Tangdu Hospital Seed Talent Program (Fei-Long Wei) and Natural Science Basic Research Plan in Shaanxi Province of China (No.2019JM-265).

Accuracy of a Computer-Aided Dynamic Navigation System in the Placement of Zygomatic Dental Implants: An In Vitro Study.

The objective of this in vitro study was to evaluate and compare the accuracy of zygomatic dental implant (ZI) placement carried out using a dynamic navigation system. Materials and Methods: Forty (40) ZIs were randomly distributed into one of two study groups: (A) ZI placement via a computer-aided dynamic navigation system (n = 20) (navigation implant (NI)); and (B) ZI placement using a conventional free-hand technique (n = 20) (free-hand implant (FHI)). A cone-beam computed tomography (CBCT) scan of the existing situation was performed preoperatively to plan the surgical approach for the computer-aided study group. Four zygomatic dental implants were placed in anatomically based polyurethane models (n = 10) manufactured by stereolithography, and a postoperative CBCT scan was performed. Subsequently, the preoperative planning and postoperative CBCT scans were added to dental implant software to analyze the coronal entry point, apical end point, and angular deviations. Results were analyzed using the Student’s t-test. Results: The results showed statistically significant differences in the apical end-point deviations between FHI and NI (p = 0.0018); however, no statistically significant differences were shown in the coronal entry point (p = 0.2617) or in the angular deviations (p = 0.3132). Furthermore, ZIs placed in the posterior region showed more deviations than the anterior region at the coronal entry point, apical end point, and angular level. Conclusions: The conventional free-hand technique enabled more accurate placement of ZIs than the computer-assisted surgical technique. In addition, placement of ZIs in the anterior region was more accurate than that in the posterior region.

Efficacy of Shadow-Based Needle Positioning System in Performing CT Image-Guided Percutaneous Biopsy of Lung Lesions: Our Initial Experience.

Context Computerized tomography (CT) is widely used for various interventions and there is a need for an effective navigation tool, for best outcomes. Aim The study was performed to evaluate the efficacy of light- and shadow-based needle positioning assistance device, an innovative navigation tool over the conventional freehand technique, in performing CT image-guided percutaneous interventions. Settings and Design This randomized control trial was performed among patients undergoing CT-guided percutaneous intervention for lung pathologies. Methodology A total of 60 participants were randomized into an intervention group and a control group. The accuracy of needle insertion and other efficacy parameters were assessed for both groups. Post needle placement, CT images were used to evaluate the study endpoints. Statistical Analysis Statistical analysis was performed using SPSS ver. 20 software. Results The mean needle positioning accuracy was 2.1 mm in the experimental group compared with 7.2 mm in the control group freehand procedures. The average time to position the needle at the desired target location was 2.5 minutes in the assisted procedure as compared with 5.3 minutes in the freehand procedure ( p < 0.05). The total number of check scans required to position the needle was 1.3 for assisted procedures and 1.9 for freehand procedures. Conclusion The use of shadow-based assistance device for CT-guided interventions is proven to be efficient and safer with high needle positioning accuracy.