Conventional Extreme Learning Machine Research Articles

Short-Term Electrical Load Forecasting Using an Enhanced Extreme Learning Machine Based on the Improved Dwarf Mongoose Optimization Algorithm

Accurate short-term electrical load forecasting is crucial for the stable operation of power systems. Given the nonlinear, periodic, and rapidly changing characteristics of short-term power load forecasts, this paper introduces a novel forecasting method employing an Extreme Learning Machine (ELM) enhanced by an improved Dwarf Mongoose Optimization Algorithm (Local escape Dwarf Mongoose Optimization Algorithm, LDMOA). This method addresses the significant prediction errors of conventional ELM models and enhances prediction accuracy. The enhancements to the Dwarf Mongoose Optimization Algorithm include three key modifications: initially, a dynamic backward learning strategy is integrated at the early stages of the algorithm to augment its global search capabilities. Subsequently, a cosine algorithm is employed to locate new food sources, thereby expanding the search scope and avoiding local optima. Lastly, a “madness factor” is added when identifying new sleeping burrows to further widen the search area and effectively circumvent local optima. Comparative analyses using benchmark functions demonstrate the improved algorithm’s superior convergence and stability. In this study, the LDMOA algorithm optimizes the weights and thresholds of the ELM to establish the LDMOA-ELM prediction model. Experimental forecasts utilizing data from China’s 2016 “The Electrician Mathematical Contest in Modeling” demonstrate that the LDMOA-ELM model significantly outperforms the original ELM model in terms of prediction error and accuracy.

A hybrid Extreme Learning Machine model with Lévy flight Chaotic Whale Optimization Algorithm for Wind Speed Forecasting

Efficient and accurate prediction of renewable energy sources (RES) is an interminable challenge in efforts to assure the stable and safe operation of any hybrid energy system due to its intermittent nature. High integration of RES especially wind energy into the existing power sector in recent years has made the situation still challenging which draws the attention of many researchers in developing a computationally efficient forecast model for accurately predicting RES. With the advent of Neural network based methods, ELM -Extreme Learning Machine, a typical Single Layer Feedforward Network (SLFFN), has gained a significant attention in recent years in solving various real-time complex problems due to simplified architecture, good generalization capabilities and fast computation. However, since the model parameters are randomly assigned, the conventional ELM is frequently ranked as the second-best model. As a solution, the article attempts to construct a unique optimized Extreme Learning Machine (ELM) based forecast model with improved accuracy for wind speed forecasting. A novel swarm intelligence technique- Lévy flight Chaotic Whale Optimization algorithm (LCWOA) is utilized in the hybrid model to optimize different parameters of ELM. Despite having a appropriate convergence rate, WOA is occasionally unable to discover the global optima due to imbalanced exploration and exploitation when using control parameters with linear variation. An improvement in the convergence rate of WOA can be expected by incorporating chaotic maps in the control parameters of WOA due to their ergodic nature. In addition to this, Lévy flight can significantly improve the intensification and diversification of the Whale Optimization algorithm (WOA) resulting in improvised search ability avoiding local minima. The prediction capability of the suggested hybrid Extreme Learning Machine (ELM) based forecast model is validated with nine other existing models. The experimental study affirms that the suggested model outperform existing forecasting methods in a variety of quantitative metrics.

Per-pixel accuracy as a weighting criterion for combining ensemble of extreme learning machine classifiers for satellite image classification

Reliable classification of satellite images is essential for various applications, including land cover and crop (LCC) mapping. In recent years, ensemble classifiers have shown remarkable success in satellite image classification as they provide solutions to combine and integrate multiple classifiers. This research presented a novel satellite image classification method called PAELM. The PAELM algorithm builds a diverse set of extreme learning machine (ELM) classifiers and combines them using the pixel-based LCC accuracy values in such a way that, for a given pixel, the most highly accurate ELM classifier among the ensemble of ELMs assigns the LCC class of that pixel. We validated PAELM on six experimental sites with varying geographical environments in the United States and compared it with three advanced machine learning classifiers, namely support vector machine, conventional ELM, and extreme gradient boosting and one advanced ensemble classifier. Our results showed that PAELM improved the accuracy of LCC mapping in comparison to the benchmark classifiers. The LCC maps generated by PAELM had an averaged overall accuracy and aggregated F1 score of 0.811 and 0.804, respectively, while these values for the most accurate benchmark classifier were 0.787 and 0.781, respectively. The results also implied that all the classifiers were sensitive to scene heterogeneity and LCC class composition, with PAELM being the least sensitive classifier to these factors. Overall, our findings suggested that PAELM was a promising approach for accurate LCC mapping, demonstrating the practicality of spatial accuracy as a weighting factor in the integration of ensemble of classifiers.

Automatic Piecewise Extreme Learning Machine-Based Model for S-Parameters of RF Power Amplifier

This paper presents an automatic piecewise (Auto-PW) extreme learning machine (ELM) method for S-parameters modeling radio-frequency (RF) power amplifiers (PAs). A strategy based on splitting regions at the changing points of concave-convex characteristics is proposed, where each region adopts a piecewise ELM model. The verification is carried out with S-parameters measured on a 2.2–6.5 GHz complementary metal oxide semiconductor (CMOS) PA. Compared to the long-short term memory (LSTM), support vector regression (SVR), and conventional ELM modeling methods, the proposed method performs excellently. For example, the modeling speed is two orders of magnitude faster than SVR and LSTM, and the modeling accuracy is more than one order of magnitude higher than ELM.

A Novel Hierarchical Extreme Machine-Learning-Based Approach for Linear Attenuation Coefficient Forecasting.

The development of reinforced polymer composite materials has had a significant influence on the challenging problem of shielding against high-energy photons, particularly X-rays and γ-rays in industrial and healthcare facilities. Heavy materials' shielding characteristics hold a lot of potential for bolstering concrete chunks. The mass attenuation coefficient is the main physical factor that is utilized to measure the narrow beam γ-ray attenuation of various combinations of magnetite and mineral powders with concrete. Data-driven machine learning approaches can be investigated to assess the gamma-ray shielding behavior of composites as an alternative to theoretical calculations, which are often time- and resource-intensive during workbench testing. We developed a dataset using magnetite and seventeen mineral powder combinations at different densities and water/cement ratios, exposed to photon energy ranging from 1 to 1006 kiloelectronvolt (KeV). The National Institute of Standards and Technology (NIST) photon cross-section database and software methodology (XCOM) was used to compute the concrete's γ-ray shielding characteristics (LAC). The XCOM-calculated LACs and seventeen mineral powders were exploited using a range of machine learning (ML) regressors. The goal was to investigate whether the available dataset and XCOM-simulated LAC can be replicated using ML techniques in a data-driven approach. The minimum absolute error (MAE), root mean square error (RMSE), and R2score were employed to assess the performance of our proposed ML models, specifically a support vector machine (SVM), 1d-convolutional neural network (CNN), multi-Layer perceptrons (MLP), linear regressor, decision tree, hierarchical extreme machine learning (HELM), extreme learning machine (ELM), and random forest networks. Comparative results showed that our proposed HELM architecture outperformed state-of-the-art SVM, decision tree, polynomial regressor, random forest, MLP, CNN, and conventional ELM models. Stepwise regression and correlation analysis were further used to evaluate the forecasting capability of ML techniques compared to the benchmark XCOM approach. According to the statistical analysis, the HELM model showed strong consistency between XCOM and predicted LAC values. Additionally, the HELM model performed better in terms of accuracy than the other models used in this study, yielding the highest R2score and the lowest MAE and RMSE.

Online sequential, outlier robust, and parallel layer perceptron extreme learning machine models for sediment transport in sewer pipes.

Sediment transport is a noteworthy task in the design and operation of sewer pipes. Decreasing sewer pipe hydraulic capacity and transport of pollution are the main consequences of continuous sedimentation. Among different design approaches, the non-deposition with deposited bed (NDB) method can be used for the design of large sewer pipes; however, existing models are established on limited data ranges and mostly applied conventional regression methods. The current study improves the NDB sediment transport modeling by utilizing wide data ranges, and furthermore, applying robust machine learning techniques. In the present study, the conventional extreme learning machine (ELM) technique and its advanced versions, namely the online sequential-extreme learning machine (OS-ELM), outlier robust-extreme learning machine (OR-ELM), and parallel layer perceptron-extreme learning machine (PLP-ELM) are used for the modeling. In the studies conducted in the literature, sediment deposited bed thickness (ts) or deposited bed width (Wb) was used in the model structure as a deposited sediment variable, and therefore, different parameters in terms of ts and Wb can be incorporated into the model structure. However, an uncertainty arises in the selection of the appropriate parameter among Wb/Y, ts/Y, Wb/D, and ts/D (Y is flow depth and D circular pipe diameter). In order to define the most appropriate parameter to best describe the impact of deposited sediment at the channel bottom in the modeling procedure, four various scenarios using four different parameters that incorporate deposited sediment variables at their structures as Wb/Y, ts/Y, W/D, and ts/D are considered for model development. It is found that models that incorporate sediment bed thickness (ts) provide better results than those whichuse deposited bed width (Wb) in their structures. Among four different scenarios, models that utilized ts/D dimensionless parameter, give superior results in contrast to their alternatives. Based on the outcomes, the OR-ELM approach outperformed ELM, OS-ELM, and PLP-ELM techniques. The results obtained from applied methods are compared to their corresponding models in the literature, indicating the superiority of the OR-ELM model. It is figured out that the thickness of the deposited bed is an effective variable in modeling NDB sediment transport in sewer pipes.

Class-specific extreme learning machine based on overall distribution for addressing binary imbalance problem

Class imbalance problem occurs when the training dataset contains significantly fewer samples of one class in contrast to another class. Conventional extreme learning machine (ELM) gives the same importance to all the samples leading to the results, which favor the majority class. To solve this intrinsic deficiency, modifications of ELM have been developed such as weighted ELM (WELM) and WELM based on the overall distribution (ODW-ELM). Recently class-specific ELM (CS-ELM) was designed for class imbalance learning. It has been shown in this work that the derivation of the output weights, \(\varvec{\beta }\), is more efficient compared to class-specific cost regulation ELM (CCRELM) for handling the class imbalance problem. Motivated by CCRELM, X. Luo et al. have proposed the classifier ODW-ELM, which is also not efficient for imbalance learning. In this work, a novel class-specific ELM based on overall distribution (OD-CSELM) and the kernelized version of OD-CSELM (OD-CSKELM) is proposed to address the binary class imbalance problem more effectively. OD-CSELM and OD-CSKELM are motivated by CS-ELM. In addition, the computational complexity of OD-CSELM and OD-CSKELM is significantly lower than WELM and kernelized WELM, respectively. The proposed work is evaluated by using the benchmark real-world imbalanced datasets. The experimental results demonstrate that the proposed work gives good generalization performance in contrast to the rest of the classifiers for class imbalance learning.

An Improved Multi-Label Learning Method with ELM-RBF and a Synergistic Adaptive Genetic Algorithm

Profiting from the great progress of information technology, a huge number of multi-label samples are available in our daily life. As a result, multi-label classification has aroused widespread concern. Different from traditional machine learning methods which are time-consuming during the training phase, ELM-RBF (extreme learning machine-radial basis function) is more efficient and has become a research hotspot in multi-label classification. However, because of the lack of effective optimization methods, conventional extreme learning machines are always unstable and tend to fall into local optimum, which leads to low prediction accuracy in practical applications. To this end, a modified ELM-RBF with a synergistic adaptive genetic algorithm (ELM-RBF-SAGA) is proposed in this paper. In ELM-RBF-SAGA, we present a synergistic adaptive genetic algorithm (SAGA) to optimize the performance of ELM-RBF. In addition, two optimization methods are employed collaboratively in SAGA. One is used for adjusting the range of fitness value, the other is applied to update crossover and mutation probability. Sufficient experiments show that ELM-RBF-SAGA has excellent performance in multi-label classification.

On computing the hyperparameter of extreme learning machines: Algorithm and application to computational PDEs, and comparison with classical and high-order finite elements

We consider the use of extreme learning machines (ELM) for computational partial differential equations (PDE). In ELM the hidden-layer coefficients in the neural network are assigned to random values generated on [−Rm,Rm] and fixed, where Rm is a user-provided constant, and the output-layer coefficients are trained by a linear or nonlinear least squares computation. We present a method for computing the optimal or near-optimal value of Rm based on the differential evolution algorithm. The presented method enables us to illuminate the characteristics of the optimal Rm for two types of ELM configurations: (i) Single-Rm-ELM, corresponding to the conventional ELM method in which a single Rm is used for generating the random coefficients in all the hidden layers, and (ii) Multi-Rm-ELM, corresponding to a modified ELM method in which multiple Rm constants are involved with each used for generating the random coefficients of a different hidden layer. We adopt the optimal Rm from this method and also incorporate other improvements into the ELM implementation. In particular, here we compute all the differential operators involving the output fields of the last hidden layer by a forward-mode auto-differentiation, as opposed to the reverse-mode auto-differentiation in a previous work. These improvements significantly reduce the network training time and enhance the ELM performance. We systematically compare the computational performance of the current improved ELM with that of the finite element method (FEM), both the classical second-order FEM and the high-order FEM with Lagrange elements of higher degrees, for solving a number of linear and nonlinear PDEs. It is shown that the current improved ELM far outperforms the classical FEM. Its computational performance is comparable to that of the high-order FEM for smaller problem sizes, and for larger problem sizes the ELM markedly outperforms the high-order FEM.

Multi‐hour ahead forecasting of building energy through a new integrated model

AbstractThe increase in electricity demand requires improved energy planning programs, which involve better energy distribution. Therefore, precise energy demand forecasting is of great importance for optimizing energy distribution. In this respect, a new hybrid forecasting model was proposed in this study for multi‐hour forecasting of total energy requirement (cooling and heating load of buildings) in three different regions in Algeria with different climate conditions. The proposed models are based on two main steps: In the first step, time‐series data were decomposed using Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (CEEMDAN) into a different intrinsic function (IMFs), and then extreme learning machine (ELM) is employed as essence predictors. The proposed CEEMDAN‐ELM model uses the decomposed IMFs as input data, and the total energy concern as a desired output. The integrated CEEMDAN‐ELM model was evaluated and validated on three different databases each of which had 2 years of measurement on an hourly scale. Experimental results show that the hybridization mechanism CEEMDAN‐ELM outperform the stand‐alone model (ELM) in terms of forecasting errors over the entire forecasting horizon. Forecasting results of CEEMDAN‐ELM led to a normalized root mean square error (nRMSE) in the range of [0.71–4.66] for all studied regions and horizons whereas conventional ELM provides an nRMSE in the range of [0.93–16.89].

Structural deformation prediction model based on extreme learning machine algorithm and particle swarm optimization

In this paper, an extreme learning machine (ELM) algorithm based on particle swarm optimization (PSO) is proposed to predict structural deformation. Taking an aqueduct located in Tiantai County, Zhejiang, China, as a case study, a series of observations of the aqueduct vertical displacements and crack openings were used to train a neural network. Then, variables representing environmental factors (air temperature), hydraulic factors (water level), and aging were selected as the influence factors input into the prediction model. Finally, the proposed PSO–ELM model was used to predict the vertical deformation and crack opening of the aqueduct, and the predicted results were compared with the monitored values using four evaluation indexes: mean absolute error (MAE), mean squared error (MSE), maximum absolute error (S), and correlation coefficient (R). The prediction results obtained using the PSO–ELM model were then compared with those obtained using the evolutionary ELM, conventional ELM, back propagation neural network, long short-term memory, and multiple linear regression models. The results indicate that the proposed PSO–ELM model has an evidently superior predictive ability, with higher values of R and lower values of MAE, MSE, and S. The proposed model can therefore be confidently used to serve as a tool similar to a “weather forecast” function to predict the vertical deformation and crack openings of an aqueduct and may be employed for other structural monitoring applications as well.

Sliding Mode Control for Hypersonic Vehicle Based on Extreme Learning Machine Neural Network Disturbance Observer

The novel extreme learning machine (ELM) neural network disturbance observer (NNDO) - based sliding mode control (SMC) strategy is proposed for the precise tracking control of a hypersonic vehicle (HV) under various disturbance situations. By converting nonlinear dynamics into state-dependent linear model, the control law design process is simplified, and the sliding mode control law based on the power function reaching rate is designed to suppress the chattering effect. Considering the disturbances, the ELM-NNDO is designed based on the single-hidden layer feedforward network (SLFN). Different from conventional ELM using least square optimization approach, the output weight here is updated based on the Lyapunov synthesis approach. In addition, the influences of the disturbances on the velocity and altitude are attenuated by the direct feedback compensation (DFC), and the offset-free tracking control is realized for the output reference signal. Comparison of simulation results verify the superior control performance of the proposed method.

A novel integrated approach of ELM and modified equilibrium optimizer for predicting soil compression index of subgrade layer of Dedicated Freight Corridor

This study proposes a high-performance machine learning model to sidestep the time of conducting actual laboratory tests of soil compression index (Cc), one of the important criteria for determining the settlement of subgrade layers of roadways, railways, and airport runways. The suggested method combines the modified equilibrium optimizer (MEO) and the extreme learning machine (ELM) in a novel way. In this study, Gaussian mutation with an exploratory search mechanism was incorporated to construct the MEO and used to enhance the performance of conventional ELM by optimizing its learning parameters. PCA (Principal component analysis)-based results exhibit that the developed ELM-MEO attained the most precise prediction with R2 = 0.9746, MAE = 0.0184, and RMSE = 0.0284 in training, and R2 = 0.9599, MAE = 0.0232, and RMSE = 0.0357 in the testing phase. The results showed that the proposed ELM-MEO model outperformed the other developed models, confirming the ELM-MEO model's superiority over the other models, such as random forest, gradient boosting machine, genetic programming, including the ELM and artificial neural network (ANN)-based models optimized with equilibrium optimizer, particle swarm optimization, Harris hawks optimization, slime mould algorithm, and marine predators algorithm. Based on the experimental results, the proposed ELM-MEO can be used as a promising alternative to predict soil Cc in civil engineering projects, including rail and road projects.

Effective forecasting of stock market price by using extreme learning machine optimized by PSO-based group oriented crow search algorithm.

Stock index price forecasting is the influential indicator for investors and financial investigators by which decision making capability to achieve maximum benefit with minimum risk can be improved. So, a robust engine with capability to administer useful information is desired to achieve the success. The forecasting effectiveness of stock market is improved in this paper by integrating a modified crow search algorithm (CSA) and extreme learning machine (ELM). The effectiveness of proposed modified CSA entitled as Particle Swarm Optimization (PSO)-based Group oriented CSA (PGCSA) to outperform other existing algorithms is observed by solving 12 benchmark problems. PGCSA algorithm is used to achieve relevant weights and biases of ELM to improve the effectiveness of conventional ELM. The impact of hybrid PGCSA ELM model to predict next day closing price of seven different stock indices is observed by using performance measures, technical indicators and hypothesis test (paired t-test). The seven stock indices are considered by incorporating data during COVID-19 outbreak. This model is tested by comparing with existing techniques proposed in published works. The simulation results provide that PGCSA ELM model can be considered as a suitable tool to predict next day closing price.

ELM-based adaptive neuro swarm intelligence techniques for predicting the California bearing ratio of soils in soaked conditions

This study proposes novel integration of extreme learning machine (ELM) and adaptive neuro swarm intelligence (ANSI) techniques for the determination of California bearing ratio (CBR) of soils for the subgrade layers of railway tracks, a critical real-time problem of geotechnical engineering. Particle swarm optimization (PSO) with adaptive and time-varying acceleration coefficients (TAC) was employed to optimize the learning parameters of ELM. Three novel ELM-based ANSI models, namely ELM coupled-modified PSO (ELM-MPSO), ELM coupled-TAC PSO (ELM-TPSO), and ELM coupled-improved PSO (ELM-IPSO) were developed for predicting the CBR of soils in soaked conditions. Compared to standard PSO (SPSO), the modified and improved version of PSO are capable of converging to a high-quality solution at early iterations. A detailed comparison was made between the proposed models and other conventional soft computing techniques, such as conventional ELM, artificial neural network, genetic programming, support vector machine, group method of data handling, and three ELM-based swarm intelligence optimized models (ELM-based grey wolf optimization, ELM-based slime mould algorithm, and ELM-based Harris hawks optimization). Experimental results reveal that the proposed ELM-based ANSI models can attain the most accurate prediction and confirm the dominance of MPSO over SPSO. Considering the consequences and robustness of the proposed models, it can be concluded that the newly constructed ELM-based ANSI models, especially ELM-MPSO, can solve the difficulties in tuning the acceleration coefficients of SPSO by the trial-and-error method for predicting the CBR of soils and be further applied to other real-time problems of geotechnical engineering.

Examination of the ECG signal classification technique DEA-ELM using deep convolutional neural network features

The accurate separation of ECG signals has become crucial to identify heart diseases. Machine learning methods are widely used to separate ECG signals. The aim of this study was to obtain optimal number of hidden neurons of the Extreme Learning Machine (ELM) using the differential evolution algorithm (DEA) and increase the accuracy rate of ECG classification. In this study, a public database on PhysioNet was used for ECG signal classification. A deep feature method using convolutional neural network was used to extract the major features of the ECG samples. Then, a conventional ELM was applied to the ECG signals. Subsequently, the ECG signals with deep properties were shared with the MATLAB classifier toolbox (k-NN, SVM, Decision Trees). In addition, the ECG signals in the dataset were tested using the Genetic Algorithm Wavelet Kernel-ELM (GAWK-ELM). Finally, the DEA-ELM was improved for the determination of the number of hidden neurons. This study optimized the hidden neuron numbers of traditional ELM with DEA using deep learning capabilities in the feature extraction. The aim of was to maximize the best cost of the DEA and achieve the optimal number of hidden neurons in ELM. Accuracy (Acc), sensitivity (Se), specificity (Spe) and F-measure were used as the performance metrics for the classifier performances. The classification results were 80.60%, 81.50%, and 83.12% with SVM, ELM and DEA-ELM, respectively. Thus, the best classification scores were accomplished with an accuracy of 83.12% with the algorithm supported by the DEA.

Extreme Learning Machine-Based Thermal Model for Lithium-Ion Batteries of Electric Vehicles under External Short Circuit

Abstract External short circuit (ESC) of lithium-ion batteries is one of the common and severe electrical failures in electric vehicles. In this study, a novel thermal model is developed to capture the temperature behavior of batteries under ESC conditions. Experiments were systematically performed under different battery initial state of charge and ambient temperatures. Based on the experimental results, we employed an extreme learning machine (ELM)-based thermal (ELMT) model to depict battery temperature behavior under ESC, where a lumped-state thermal model was used to replace the activation function of conventional ELMs. To demonstrate the effectiveness of the proposed model, we compared the ELMT model with a multi-lumped-state thermal (MLT) model parameterized by the genetic algorithm using the experimental data from various sets of battery cells. It is shown that the ELMT model can achieve higher computational efficiency than the MLT model and better fitting and prediction accuracy, where the average root mean squared error (RMSE) of the fitting is 0.65 °C for the ELMT model and 3.95 °C for the MLT model, and the RMES of the prediction under new data set is 3.97 °C for the ELMT model and 6.11 °C for the MLT model.

Robust adaptive integral terminal sliding mode control for steer-by-wire systems based on extreme learning machine

In this paper, a novel extreme-learning-machine (ELM)-based robust adaptive integral terminal sliding mode (AITSM) control strategy is developed for the precise tracking control of a steer-by-wire (SBW) system with uncertain dynamics. The proposed control not only ensures the finite-time error convergence but also effectively estimates the lumped uncertainty via a single-hidden layer feedforward network (SLFN) with ELM. Different from conventional ELM using least square optimization approach, the ELM in this work is designed to adaptively estimate the lumped uncertainty from the perspective of global stability of the closed-loop system. The stability of the closed-loop control system is proved in Lyapunov sense. Simulations are carried out to demonstrate the superior control performance of the proposed control.

Modeling suspended sediment load in a river using extreme learning machine and twin support vector regression with wavelet conjunction

Forecasting the sediment load in a river is difficult due to different parameters viz., heavy rainfall and precipitation, tropical climate, transportation of sediment, and so on. The wavelet transformations model helps to analyze the time and frequency information to estimate sediment load by decomposing data over several phases. Inspired from this idea, based on extreme learning machine (ELM) and twin support vector regression (TSVR), this work proposes two coiflet wavelet-based models as, coiflet wavelet-based ELM and coiflet wavelet-based TSVR for sediment load estimation. The results are compared with conventional ELM and TSVR. The performances of the algorithms are examined using five performance evaluation techniques i.e. root mean square error, mean absolute error, ratio between sum of squares error and total sum of squares, symmetric mean absolute percentage error and mean absolute scaled error. The experimental outcomes reveal that the hybrid models based on the coiflet wavelet offer good performance.

A novel ECG signal classification method using DEA-ELM

Electrocardiogram (ECG) signals represent the electrical mobility of the human heart. In recent years, computer-aided systems have helped to cardiologists in the detection, classification and diagnosis of ECG. The aim of this paper is to optimize the number hidden neurons of the traditional Extreme Learning Machine (ELM) using Differential Evolution Algorithm (DEA) and contribute to the classification of ECG signals with a higher accuracy rate. In this paper, publicly ECG records in Physionet was utilized. Pan-Tompkins technique (PTT) and Discrete Wavelet Transform (DWT) approaches were implemented to obtain characteristic properties which are PR period, QT period, ST period and QRS wave of ECG signals. Then, ELM was executed to the ECG samples. Lastly, DEA on software ELM was developed for the assign of the number of hidden neurons, which were used in the ELM algorithm. The performance criterions were used in order to compare the performance of the classification exerted. Concordantly, it was realized that the highest classification achievement values were reached to Accuracy 97.5% and values 93 of number of hidden neurons, with the practice improved with the DEA compared to conventional ELM.