Conventional Bleaching Research Articles

Water conservation in garment bleaching using aerosol technology

Bleaching is one of the most highly polluting textile wet processes. High water and chemical consumption, and high volume of the resulting effluent, have huge implications for the environment. In this study, an aerosol process has been compared with the conventional process for bleaching of textile socks. In the conventional bleaching process, socks are immersed into a rotating drum filled with water to ensure uniform application of chemicals, while in the aerosol bleaching process, compressed air was mixed with the chemical solution to generate a cloud of bleaching reagents inside the rotating drum of the exhaust processing machine, using the minimum amount of water. The results show comparable whiteness results of the bleached socks, with up to 75% water saved in the aerosol beaching process as compared to the conventional bleaching process. Due to lower water consumption, the overall chemical consumption is also significantly reduced. Citric acid and silicone softener consumption of the process were reduced by 28% and 60%, respectively. The aerosol technology can be retrofitted on existing conventional machines with minimal initial investment and shows immense potential for reduction in water and chemical consumption and harmful impacts on the environment. This study aimed to align developments in the textile and apparel industry with sustainable development goals #6, 12, and 14, which are clean water and sanitation, responsible consumption and production, and life below water, respectively.

Low Temperature Bleaching of Jute Using Peracetic Acid: A Novel Process

Jute, a natural golden fibre, is renewable and widely available and mostly used for the packaging of agricultural crops and commodities in the form of sack bag. However, over a period of time it has secured its own market in the field of home textiles and other lifestyle products due to its ethnic colour, good strength and biodegradable properties. Recently, jute has also been used in apparel products, particularly meant for outer and winter garments. Bleaching of jute has thus become an essential operation for making a white glossy fabric, that is, the base material to be used for subsequent coloration. The conventional hot hydrogen peroxide bleaching process produces good white fibre with a high loss in tensile strength. The present peracetic acid bleaching of scoured jute produces a satisfactory whiteness index of 65.8–77.7 with minimum loss of bundle strength. The peracetic acid bleached jute fibre could retain 85% of its bundle strength, when the bleaching was carried out at 70°C with 20 g/l peracetic acid for 120 min. A satisfactory whiteness index of 77 (Hunter scale) can be achieved incurring a low weight loss of <4.2 using the optimized recipe. The peracetic acid bleaching process may be considered as energy efficient and environment friendly, as the process is carried out at a near neutral pH of 7.5–8 and lower temperature of 50–70°C, in comparison to the 85–90°C and pH level of 11–11.5 (highly alkaline) normally used in hydrogen peroxide bleaching. The changes in physical, morphological and chemical properties after the peracetic acid bleaching of jute at optimized conditions were evaluated in detail.

Photon-Induced Photoacoustic Streaming Activation of the Postbleaching Antioxidant Application Rapidly Improves Bonding to Pulp Chamber Dentin.

Objective: This study explored whether the erbium/yttrium/aluminum/garnet (Er:YAG) laser irradiated through the photon-induced photoacoustic streaming (PIPS) method would impact on the resin bonding to pulp chamber dentin when used to activate bleaching and/or postbleaching antioxidant treatment. Materials and methods: One hundred five dentin samples prepared from freshly extracted human incisors were randomly assigned to seven groups (n = 15): control (no bleaching/antioxidant); CB (conventional bleaching only); MB (modified bleaching only); CB-NI (conventional bleaching+antioxidant with needle irrigation); MB-NI (modified bleaching+antioxidant with needle irrigation); CB-PIPSI (conventional bleaching+antioxidant with PIPS-activated irrigation); and MB-PIPSI (modified bleaching+antioxidant with PIPS-activated irrigation). Bleaching (40% hydrogen peroxide) lasted for 20 min. Modified bleaching groups were irradiated with Er:YAG laser using the PIPS tip (2940 nm, 0.90 W, 30 Hz, 30 mJ/pulse, 50-μsec pulse duration) during the first 60 sec of the procedure. The antioxidant treatment with 10% sodium ascorbate lasted for 60 sec. PIPS-activated antioxidant groups were irradiated with Er:YAG laser using the PIPS tip (2940 nm, 0.30 W, 15 Hz, 20 mJ per pulse, 50-μsec pulse duration) throughout the procedure. After completing the composite restorations, all samples were subjected to 5000 thermocycling and the shear bond strength (SBS) test at a crosshead speed of 1 mm/min. SBS data were analyzed using the Kruskal-Wallis test with Bonferroni correction (α& 0.05). Results: No significant difference was detected among the control, CB-PIPSI, and MB-PIPSI (p > 0.05), which presented a significantly higher SBS compared with the other groups (p < 0.05). Conclusions: Irrespective of the application mode of the initial bleaching, PIPS-activated irrigation of the antioxidant improved SBS to bleached dentin to the level of the control in 1 min. Postbleaching antioxidant treatment combined with the PIPS method might be a promising approach to enable immediate resin restoration of bleached dentin.

Sustainable Bleaching Process of Raw Cotton by TiO2 Light-Activated Nanoparticles

Nanoparticles (NPs) of titanium dioxide (TiO2) are promising for the photocatalytic degradation of organic compounds, arising as an excellent alternative to conventional bleaching processes. Within this background, aqueous suspensions of TiO2 NPs were impregnated by the pad-dry method in raw cotton. The hydrophilic properties and whiteness index (WI) of Berger were the main parameters examined before and after the TiO2 treatment. In the absence of water, using a UV-Vis lamp, high hydrophilicity was found for raw cotton. Diversely, under UV-LED radiation, the presence of water molecules in the coated cotton was revealed to be a crucial parameter in enhancing its whiteness. A comparable WI of Berger with conventional bleaching methods was obtained using 0.5 g L-1 TiO2 suspension under UV-LED radiation, suggesting that the impregnation of TiO2 NPs can be a promising alternative for the industrial bleaching methods, as it proves to be more sustainable and with low operating costs.

Improvement in the absorbency of ozone bleached cotton fabric by the addition of surfactant

The combined effect of surfactants with ozone bleaching process on the quality of cotton fabric was examined in this paper. The concentration of surfactants was varied between 0.01- 0.5 g/l in order to evaluate its effect on CIE whiteness, absorbency and strength of cotton fabric bleached by ozone. The maximum improvement in absorbency (1.07 s) and whiteness (WCIE 66.53) was achieved in the presence of anionic surfactant (0.01 g/l) at optimized experimental conditions. The strength properties of cotton fabric bleached by ozone in the presence of surfactant were also improved. Pollution load of ozone bleaching effluent even after adding surfactant was far less than conventional bleaching effluent. Statistically it was confirmed that surfactant addition significantly improved the whiteness and absorbency of ozone bleached cotton fabric.

Eco-Friendly Cotton/Linen Fabric Treatment Using Aqueous Ozone and Ultraviolet Photolysis

Chemicals for the scouring and bleaching of fabrics have a high environmental load. In addition, in recent years, the high consumption of these products has become a problem in the manufacture of natural fabric products. Therefore, environmentally friendly, low-waste processes for fabric treatment are required. In this paper, we discuss the bleaching of fabrics using advanced oxidation processes (AOP). These processes use electrochemically generated aqueous ozone and ultraviolet (UV) irradiation to achieve bleaching. However, colour reversion often occurs. In this study, we suppressed unwanted colour reversion by treatment with rongalite. After treatment, changes in fabric colour were determined by measuring the colour difference and reflectance spectra. The best bleaching effect was obtained when ozone and UV irradiation treatments were combined, achieving results similar to those of a conventional bleaching method after 60 min of UV irradiation. In addition, the AOP treatment resulted in the simultaneous scouring of the fabric, as shown by the increased hydrophilicity of the fabric after AOP treatment. Thus, this AOP process represents a new fabric bleaching process that has an extremely low environmental impact.

Changes in physicomechanical properties and structures of jute fibers after tetraacetylethylenediamine activated hydrogen peroxide treatment

Tetraacetylethylenediamine (TAED) activated hydrogen peroxide (H2O2) was tentatively used in the bleaching of scoured jute fibers, and the effects of this method on the physicomechanical properties, main chemical compositions, and structures during bleaching were evaluated and compared with conventional H2O2 bleaching. By comparing with H2O2 bleached jute fibers, the TAED-activated H2O2 bleached jute fibers were found to have a better storage stability of whiteness and yellowness, higher breaking tenacity, lower fineness value and breaking extension. The differences in morphological structure and thermogravimetric analysis showed that the TAED-activated H2O2 bleaching system had a stronger ability for the removal of noncellulosic materials than conventional H2O2 bleaching system. The changes in main chemical compositions and Fourier transform infrared spectra further indicated that the removal ability of TAED-activated bleaching for lignin was obviously stronger than that of conventional bleaching, but it had a similar removal ability for hemicellulose. Furthermore, when the whiteness and yellowness values were similar, the amount of H2O2, bleaching temperature, and time of TAED-activated H2O2 bleaching were obviously less than those of H2O2 bleaching.

Two-Step Bleaching of Jute Yarn and Fabric Using Hydrogen Peroxide and Peracetic Acid

ABSTRACT Bleaching of jute has become essential for making white glossy fabric or base material for coloration intended for value added and diversified products. The conventional hot hydrogen peroxide bleaching process produces white fiber with high loss of tensile strength and impairing the feel. On the other hand newly developed peracetic acid bleaching of jute produces minimum loss of tenacity without impairing the feel but whiteness achieved is slightly low. Partial bleaching of jute was carried out using 25%, 50%, and 75% of the normal dose of bleaching agents and their whiteness index as well as tensile strength were evaluated. In all the cases hydrogen peroxide produced 5–8 grade higher whiteness in HUNTER scale while peracetic acid bleached sample retains higher tensile strength. So, two-step bleaching was carried out using hydrogen peroxide and peracetic acid following single-bath and double-bath processes. Two-step single-bath bleaching of jute fabric using 75% peracetic acid followed by 25% hydrogen peroxide bleaching treatment results in best effect with respect to optical and physical properties.

Comparative performance evaluation of bleaching of Egyptian cotton fibers using different bleaching agents

The main objective of this study was to evaluate the potential of sodium percarbonate and sodium perborate utilization in cotton fiber bleaching instead of Hydrogen Peroxide and to compare the influence of these bleaching agents on performance of some Egyptian cotton varieties (G88, G90, G95, and G96). Bleaching efficiency is evaluated by the degree of whiteness, yellowness, micronaire value, Length, fiber strength and elongation percent. This research was conducted with bleaching using Oxygen bleaches comparable to the conventional bleaching agents such as Hydrogen Peroxide. Results showed that the bleaching with sodium Percarbonate (SPC) and sodium perborate (SPB) using three different concentrations brought an overall improvement in cotton fibers whiteness without decreasing the qualities of cotton fibers in comparison to hydrogen peroxide. This implies that these oxygen bleaches can replace the hydrogen peroxide. Moreover, oxygen bleaches are considered as good alternatives for other bleaches because of their economic and environmental impact as they are more stable and can be stored in a solid form. Besides, they can be active at lower temperatures.

Bleaching of Olive Oil by Membrane Filtration

AbstractIn this study the application of membrane processes for olive oil bleaching is investigated. Olive oil is treated by adding 0.7 wt% of bleaching earth, 0.3 wt% of activated charcoal, and 5% wt% of sodium dodecyl sulfate solution (0.05 m) and then charged into the membrane cell. Operating conditions including pressure ((2−4) × 105 Pa), temperature (25–45 °C), and stirring rate (100–300 rpm) are optimized. Physico‐chemical properties of membrane bleached oil are evaluated and compared with crude and industrially bleached olive oil. Results show that the filtration conditions for the optimized point are as follows: pressure = 3.7 bar (3.7×105 Pa), temperature = 36.5 °C, and stirring rate = 300 rpm. Under optimum conditions, the amounts of carotenoid and chlorophyll contents are decreased (71.3% and 40.42%, respectively). Acidic and thiobarbituric acid values reduction in membrane‐processed oil (12.42% and 14.46%, respectively) are more than the industrial one. Also, some bioactive compounds such as sterols and phenolic compounds are increased in the membrane‐filtered sample (23.13% and 57.12%, respectively).Practical Applications: Olive oil bleaching is an important step along the refining process. Pigments and minor impurities that reduce olive oil stability are removed in this step. Given the disadvantages of conventional bleaching, alternative methods are introduced. In this study, the effect of membrane filtration on olive oil color is studied. Because of the mild operating conditions, the reduction of clay percentage, as well as the increase of bioactive compounds in optimum conditions, this method has the potential to be a good alternative to conventional bleaching processes.

Activated Kaolin Minerals as Bleaching Clays for Prolonging the Useful Life of Palm Oil in Industrial Frying Operations

AbstractDuring frying operations, vegetable oils break down and compounds with undesirable flavors are produced. Various procedures have been developed to extend the useful life of frying oils, including treatment with bleaching clays. In this article, we describe the activation of kaolin minerals by a combination of grinding and chemical treatments, and report their performance in removing breakdown products generated in palm oil that had been used for 20 hours continuous frying. There was little influence of the original kaolin mineral form on the ability to reduce the free fatty acid (FFA) contents, and grinding only changed FFA reduction from ∼32% to ∼36%. However, much greater FFA reductions were obtained after chemical treatment of the ground clays, and the best performing kaolin product gave similar FFA reduction to a commercial bleaching clay (∼76% and ∼77%, respectively). This activated kaolin also produced a reduction in viscosity at 40 °C from ∼73 to 48.4 cSt (compared to 45.5 cSt in the unused oil), and in the peroxide value from 30.0 to 22.0 meq/kg (compared to 10.0 meq/kg in the initial oil). Thus, activated kaolin samples represent a cheap and convenient alternative to conventional bleaching clay for improving common quality parameters in used palm oil, although we also found that the optimum kaolin preparation conditions were different from those that have been reported for raw rice bran oil refining.

The effect of laser-activated bleaching with 810 nm and 980 nm diode lasers on enamel micro-hardness; an in vitro study

The aim of this study was to assess the micro-hardness of treated enamel with 810 nm and 980 nm diode lasers and to compare it with a conventional bleaching process.A sample of 45 caries-free human premolar teeth were selected. The enamel surfaces were completely polished. The crown portion of each tooth was then sectioned with a diamond disk, at dimensions of 3 × 3 × 3 mm. These sections were embedded in acrylic resin. The initial micro-hardness was determined by Vickers hardness apparatus at a vertical load of 200 g for 15 s. The samples were then randomly assigned to three groups of 15 samples.– Study group 1 (SG1): bleaching with Heydent JW gel and an 810 nm diode.– Study group 2 (SG2): bleaching with Heydent JW gel and a 980 nm diode.– Control group (CG): bleaching with Opalescense Boost.After bleaching, the Vickers micro-hardness was again evaluated. An analysis of covariance (ANCOVA) was used to compare the micro-hardness between the groups after bleaching, considering the initial micro-hardness as a covariate. A paired samples t-test was also used to compare micro-hardness before and after bleaching in each group and between groups.There was a significant difference in micro-hardness after bleaching with a laser and without a laser. After bleaching, the Vickers micro-hardness in the CG was significantly higher than in SG1 and SG2. There was no significant difference between SG1 and SG2 after bleaching (p value > 0.05).According to this study, laser irradiation with 810 nm and 980 nm diode lasers during tooth bleaching could cause a significant decrease in enamel micro-hardness.

Investigation of Alternative Ecologic Bleaching Methods for the Wool Fibers

ABSTRACT The techniques of bleaching process of wool fibers are bleaching with reducing agents bleaching with oxidizing agents bleaching with oxidizing-reducing agents combination. In this study, different chemical bleaching methods have been developed as an alternative to the conventional bleaching method. For this purpose, peracetic acid (CH3COOOH, 30%), sodium borohydride (NaBH4), hydrogen peroxide (H2O2, 30%), potassium monopersulfate (KHSO5), sodium dichloroisocyanurate (C3Cl2N3NaO3), oxalic acid (H2C2O4), sodium perborate (NaBO3) calcium hypochlorite (Ca(ClO)2) and combination of these chemicals were performed under acidic and basic conditions. Also the environmental impacts were evaluated with measuring wastewaters COD values and surface deformations were analyzed with SEM method.

Comparative Study on the Effects of Laser Bleaching and Conventional Bleaching on the Physical Properties of Indigo Kapok/Cotton Denim Fabrics

Kapok is a hollow fiber with a 90% hollow degree. Compared with cotton fiber, kapok fiber has excellent performances, such as good hygroscopicity, and a good warmth retention property. In this work, desized indigo kapok/cotton denim fabrics were bleached in different ways: Laser, cellulose enzyme, sodium hypochlorite, potassium permanganate and hydrogen peroxide. After bleaching, the K/S values, tensile strength, air permeability, thickness, color fastness to rubbing and the crease recovery angle of denim fabrics were measured through the spectrophotometer, tensile strength tester, air permeability tester, thickness tester, rubbing fastness tester and fabric crease elasticity tester, respectively. The surfaces of fabrics and fibers were observed by scanning electron microscopy (SEM). Results show that the kapok/cotton fabrics were color-faded after five kinds of bleaching, the K/S values of denim with laser bleaching was declined dramatically, while there was a little change in the permeability. The tensile strength and the weight of the fabrics were decreased, and cloth which was bleached with potassium permanganate was most affected. The color fastness to rubbing and the crease recovery angle of denim fabrics with laser treatment is most suitable for industrial production. In general, laser bleaching is the better way to fade the kapok/cotton denim fabrics. Meanwhile, after five kinds of bleaching, the physical properties of kapok/cotton denim fabrics were similar to those of cotton denim fabric, which indicates that kapok/cotton denim fabric is suitable for the existing industrial bleaching technology.

Optimum condition of conventional bleaching process for bleached shellac

AbstractBleached shellac has attracted wide interest in many industries. Since bleaching using sodium hypochlorite is a vigorous process, it can possess a high impact on physicochemical properties causing the unstable bleached‐shellac. An investigation into optimum conditions of the bleaching process was, therefore, required to achieve sufficient whiteness, good mechanical properties, and the stable bleached‐shellac. The studied conditions were variations in solvents, volume, and time of bleaching. Studied parameters, such as color change, acid value, insoluble solid, polarity, water vapor permeability coefficient, mechanical properties, chemical structure, and crystallinity, were detected. The physicochemical properties depended on the bleaching conditions but no effect on the chemical and amorphous structures of shellac. With the proper control of bleaching process, the simple, and conventional method can be applied in bleaching. The optimum condition was the use of sodium carbonate as a solvent, 20‐ml sodium hypochlorite, and 2‐hr bleaching time.Practical applicationsShellac has long been used as an edible coating for extending product quality. Although shellac possesses an outstanding property in moisture protection, the dark color causes an unpleasant for applying in food and pharmaceutical industries. The bleaching process using sodium hypochlorite is commonly used to whiten the shellac. Due to the vigorous redox reaction of process, extreme changes in properties of shellac were obtained. The aim was to explore the optimum condition of bleaching process. The studied conditions were, solvent used, amount, and time of bleaching process. With a careful control of process, not only provided a high degree of whiten shellac but also obtained good physicochemical properties of bleached shellac. This study could be of help in adding the value of natural polymer without the use of high temperature and power consumption compared with other methods. The bleached shellac can then be used in wider applications.

Production of dissolving grade pulp from tobacco stalk through SO2-ethanol-water fractionation, alkaline extraction, and bleaching processes

The objective of this study was to evaluate the possibility of producing dissolving grade pulp from tobacco stalk through combining SO2-ethanol-water (SEW) fractionation, alkaline extraction, and bleaching with oxygen (O), chlorine dioxide (D), alkaline extraction with hydrogen peroxide (Ep), and hydrogen peroxide (P) (OD0(Ep)D1P). The results showed that the optimum SEW cooking condition to remove the original xylan and lignin in tobacco stalk to an acceptable level was 6% SO2 charge (by weight) at 135 °C for 180 min. A bleachable pulp (Kappa number of 21.5) was produced from the SEW-treated tobacco stalk via a subsequent 1% NaOH extraction. After the OD0(Ep)D1P sequence bleaching, the bleached pulp showed a high brightness (88.1% ISO) and a high α-cellulose content (94.9%). The viscosity (15.8 cP) and the residual xylan content (4.4%) of the pulp were within acceptable levels for dissolving pulp production. Thus, tobacco stalk was shown to be a viable raw material for dissolving pulp production following a SEW treatment, alkaline extraction, and a conventional bleaching sequence.

Sustainable palm oil refining using pelletized and surface-modified oil palm boiler ash (OPBA) biosorbent

The palm oil industry has been one of the major economic contributors for Malaysia over the last decade. While contributing to the country's economic growth, the industry has inevitably produced a significant amount of waste materials which are harmful to the environment. Oil palm boiler ashes (OPBA) generated from boiler in mills are disposed in open landfills which are easily carried away by the wind. The disposed ash pollutes the air while spent earth, when left in landfills, produce a pungent odour. The present work investigated the possibility of refining palm oil with raw OPBA and pelletized OPBA as alternate bleaching adsorbents. The performance of different types OPBA (raw, enhanced and pelletized) was investigated to determine their bleaching efficiencies on carotenoid removal at various operating conditions. Crude palm oil samples were refined with these OPBA and compared with commercial bleaching earth to investigate the final refined oil colours. A final refined oil colour of 4.0R was obtained using 0.05 wt% of enhanced OPBA when bleached at 110 °C for 45 min under constant agitation (300 rpm) and subsequently deodorized at 265 °C for 1 h. This study has indicated that the use of enhanced OPBA which could achieve more than high removal of carotenoid could substitute commercial bleaching earths to produce a comparable final refined oil colour rating. The successful substitution of OPBA to replace the conventional bleaching earth in oil refining could significantly reduce the production cost. This is also a sustainable solution for the edible oil processing industries to mitigate the solid waste and contributes to a cleaner environment.

Clinical Application of Violet LED In-office Bleaching with or without Traditional Systems: Case Series

Objective: This study evaluated the efficacy and tooth sensitivity of bleaching with the novel violet LED light used in different in-office approaches. Clinical Considerations: Three patients were submitted to anamnesis, clinical and radiographic exams and to different bleaching protocols and materials. Case report I: Violet LED light was applied in 20 irradiations of 1 minute at 30-s intervals without the use of peroxide agents. After eight appointments with 4 or 7-day intervals, no tooth sensitivity (TS) was reported and color changed from A2 to A1 and from B3 to A2 in upper central incisor (tooth 11) and upper canine (tooth 13), respectively. Case report II: The same protocol established for violet LED light application was used and associated with 37% carbamide peroxide in three appointments at intervals of 7 days. Color changed from A3,5 to B2 (tooth 13), and provoked TS was reported. Case report III: 35% hydrogen peroxide was associated with the same violet LED regimen and number of sessions. Although spontaneous TS was reported in low levels, color changed from A2 to B1 (tooth 11) and from A3 to B1 (tooth 13). Conclusion: Although the three treatments promoted different bleaching responses, in vitro and in vivo investigations of the violet LED protocols are still necessary. In addition, the fact that the sensitivity levels obtained are compatible with conventional bleaching treatments demonstrated that violet LED light is possibly adequate for clinical use. Clinical Significance: Bleaching of vital teeth with violet LED with or without peroxide agents exhibited acceptable clinical results and low sensitivity responses.

Effect of Three Wavelengths of Diode Laser on the Efficacy of Bleaching of Stained Teeth.

Objectives:Light irradiation and heat have been used to accelerate the process of tooth bleaching. This study aimed to assess the efficacy of conventional bleaching compared to laser-bleaching using three different wavelengths of diode lasers.Materials and Methods:In this in-vitro experimental study, 40 extracted human central incisors were immersed in a coloring solution made of tea, coffee, and cola for 21 days. The L*, a*, and b* color parameters were measured before and after the immersion using spectrophotometry. The teeth were then randomly divided into four groups (n=10) as follows: group 1: 810-nm diode laser + Biolase Laser White 20, group 2: 940-nm diode laser + Biolase Laser White 20, group 3: 980-nm diode laser + Biolase Laser White 20, and group 4: conventional bleaching with Opalescence Boost without laser irradiation. One-way analysis of variance (ANOVA) was used to assess the effect of laser type and bleaching technique on color parameters.Results:The 940-nm (ΔE=28.5896) and 810-nm laser groups (ΔE=21.2382) showed the highest and the lowest bleaching efficacy, respectively; however, the groups were not significantly different in terms of bleaching efficacy (P>0.05).Conclusion:Laser-bleaching with 810-, 940- and 980-nm wavelengths of diode laser has an efficacy similar to that of conventional bleaching but in a shorter period. No difference was noted between different laser wavelengths in terms of bleaching efficacy.

Modified hydrogen peroxide bleaching of bamboo chemo-mechanical pulp using aqueous alcohol media

The brightness of bleached bamboo chemo-mechanical pulp (CMP) is often too low to be used as a furnish in value-added paper products. In this study, preliminary optimization of various parameters of a modified hydrogen peroxide (H2O2) bleaching procedure for bamboo CMP pulps was performed using the inclusion of ethanol in the bleaching medium (IEBM). Compared with a conventional bleaching method, this modified process is aimed at improving bleaching efficiency and brightness ceiling of bamboo CMP with the proper usage of chemicals. The CMP was bleached to a brightness of 74.2% ISO at the usage level of 12% H2O2, which shows it increased by 7.4% ISO compared with the conventional method. For a brightness target of 72.0% ISO, bleaching with the IEBM method reduced the H2O2 consumption by approximately 60%. In addition, a higher activation energy of H2O2 for the IEBM method was calculated to be 23.3 kJ/mol, which was increased by 3.3 kJ/mol compared with the conventional method.