Convenient Values Research Articles

The influence of distant surcharge load with a finite length on the cantilever walls

The behavior of a sheet pile wall constructed on saturated sand soil and exposed to a distant surcharge load with a finite length at the top of the backfill soil is examined in this study. For this aim, various internal friction angles (φ), and natural ground surface for the groundwater level are considered. Furthermore, it is considered that the sheet pile wall acts as cantilevered and supports a six-meter-high (H) excavation. The simple “45° distribution” (AP) and uniform distribution of “Beton Kalender distribution” (BK) methods are examined with Coulomb’s and Rankine’s earth pressure theories in analytical solutions, while the finite element method (FEM) is used as a numerical method. The present research has two primary goals: a) determining the best analytical approach that provides the maximum bending moment (Mmax) values that are more comparable to those of the FEM b) examining the behavior of the sheet pile wall considering several effects of load scenarios, depth (D) and section type (ST) of the wall, and the soil properties together. In this context, parametrical analyses are performed. Consequently, it is found that the distance of the surcharge load (x1) has a pronounced effect than the intensity (q) and length (Ls) of the surcharge load on the behavior of the sheet pile, and this effect vanishes for the large values of x1. Furthermore, Coulomb theory provides more convenient values with FEM for Mmax than those obtained from Rankine theory. The Mmax values obtained from FEM are generally less than those from BK, while they are greater than those from APC.

Highly Coercive L10-Phase Dots Obtained through Low Temperature Annealing for Nano-Logic Magnetic Structures

Nano-logic magnetic structures are of great interest for spintronic applications. While the methods used for developing arrays of magnetic L10-phase dots are, in most cases, based on deposition followed by annealing at high temperatures, usually around 700 °C, we demonstrate here a technique where a much lower annealing temperature (i.e., 400 °C) is needed in order to promote fully the disorder–order phase transformation and achievement of highly coercive L10-phase dots. In order to develop building blocks based on arrays of L10-phase FePt dots for further spintronic applications, an engraving technique using electron beam lithography is employed. This paper describes the fabrication, as well as the morphological and magnetic characterization, of regularly placed FePt dots of various shapes, as pre-requisites for integration into nano-logic devices. As a proof of concept, regular arrays of FePt circular dots were devised and their structural characterization, using X-ray diffraction (XRD) and transmission electron microscopy (TEM), was performed. It has been shown that annealing at only 400 °C for 30 min proved the occurrence of the tetragonal L10 phase. Moreover, structural characterization showed that the disorder–order phase transformation was complete with only the L10 phase detected in high resolution TEM. The magnetic characterization provided more insight into the potential of such arrays of magnetic devices with convenient values of magnetic coercivity, remanent and saturation magnetization. These findings show good potential for developing regular arrays of uniformly shaped magnetic entities with encouraging magnetic performances in view of various applications.

VIBRATION ANALYSIS OF A TWIN-SCREW COMPRESSOR AS A POTENTIAL SOURCE FOR PIEZOELECTRIC ENERGY HARVESTING

The paper presents the vibration spectra of a twin-screw compressor driven at various functioning regimes. The tests are performed to assess the potential of this rotary bladed machine as energy harvesting source. It is sought to determine the optimum spots on the compressor skid where piezoelectric harvesters can be placed, meeting the operational conditions. Like most of the industrial machinery, compressors exhibit inherent vibrations and heating during operation. The pulsatory effects of the compressed air trapped between the compressor’s male and female rotors inside the compressor also give birth to harmonics. It is important to evaluate the temperatures as well since piezoelectric harvesters should preferably operate close to room temperature so as not to deteriorate the material and avoid thermal hysteresis, which can ultimately lead to the loss of piezoelectric properties. The study herein involves acquiring vibrational data and representing it graphically as vibration spectra. An analytical model is also presented for calculating the main frequencies of the compressor, validated by the experimental data measurements. We also present laboratory tests with the piezoelectric harvester tuned near the male rotor’s frequency for achieving resonance conditions. The male rotor frequency was the most stable, with the highest amplitudes and of convenient value (~83 Hz) for the tip mass required for decreasing the piezoelectric cantilever’s resonant frequency from ~210 Hz.

The Decision Factors in Online Food Delivery Services Selection during the COVID-19 Pandemic

An infectious disease known as Coronavirus disease 2019 (COVID-19) has caused a worldwide health disaster. This issue also significantly impacted the world economy, including Malaysia. The government encourages business operators to shift to online business services to control the spread of the COVID-19 virus. This has caused most businesses, especially the food industry, to change their strategy by operating their company on online platforms. This research investigated the decision factors in online food delivery service selection, specifically amidst the COVID-19 outbreak in Malaysia. To achieve the study’s objective; descriptive analysis, reliability analysis, correlation analysis and multiple linear regression analysis were applied. Safety, time, convenience and price value were the four factors examined. The result discovered that safety, time and price value significantly influence the selection of online food delivery services amidst the COVID-19 pandemic in Malaysia. Among those variables, time was the strongest explanatory factor. The findings of this study may assist the food distribution companies in Malaysia to improve and enhance their service quality to cater to various consumers’ preferences.

The monetary value of convenience and environmental features in residential heat energy consumption, in particular its social determinants

Environmental and comfort value of renewable energy sources is a less studied area. The article introduce the economic value of these characteristics, related to social determinants. The data basis is representative of the Hungarian population above 18 years of age, by gender, age and level of education. Our model estimation was developed by hybrid choice context in latent class modelling. In addition to the usual WTP (willingness to pay) calculation, we also used WTI (willingness to invest) calculations. The results show that the value of environmentally-friendly nature in Hungary exceeds the convenience factor. The latter cannot be significantly detected for the majority of the Hungarian population. This statement is supported by results for both fuels and boilers. Our findings show the strong attachment of the Hungarian average person to the use of firewood and natural gas, which are very typical in Hungarian heat consumption. Regarding socially selected consumer groups, strong correlation can be observed between social capital supply, income level, access to information and environmental awareness in Hungary. Regarding policy implications, our results in development of clusters may be useful for the establishment of a selective support policy and two clearly identifiable groups should be highlighted in the energy policy.

A value-driven touchpoints strategy for managing the customer experience process

PurposeManagers use several touchpoints to provide a positive experience for customers in an experience economy. Past studies ignored how the touchpoints complement one another in creating synergy, even though this issue has tremendous managerial implications. This research paper aims to examine the role of a set of value-driven touchpoints' in providing and managing the customer experience.Design/methodology/approachFour hypotheses were formulated concerning the relationship between various value-driven touchpoints and the consumer experience. Data were collected from 360 respondents, and an econometric model was fitted to the data.FindingsThe results showed that touchpoints representing economical, functional, informational and convenient values impact the customer experience and complement one another.Practical implicationsThe findings of this study should assist managers in framing a customer-facing strategy for providing a positive experience to customers.Originality/valueUsing primary data and an econometric model, this research extends the theory on the relationship between value-driven touchpoints and customer experience, hence, adding value to the existing corpus of marketing literature.

Implementation of inflection effect of the rumbling alteration using fractal surfaces on the one-of-branch tangency situation in short-syllable

The short-syllable was examined using fractal surface, one of the unit of organization for a sequence of speech sounds techniques. A square-built welter-rough status with continuous surge conversion was confirmed by irradiating a certain amount of fractal surfaces on a timed-syllable. We determined that the scattered signal generated by the short-syllable for a few seconds was formed by several surge perception gestalts as brighten-distinguish realization level (BDRL) of the fractal surface. Welter-rough was organized according to the realization level, and various syllable techniques were used to identify the phenomenon conditions of brighten square-shape-dot. The degree of scatter in monosyllabic words varied according to the level of the square-shaped dot. The maximum average value formed in the welter-rough status was calculated as the result value as a result of the acutely converted output of the BDRL. Surge square-shape-dot rough presented that far alteration value of Su-RG-FA-?AVG with 16.97±9.24 units. Surge convenient alteration value presented Su-RG-CO-?AVG with 8.66±3.08 units. Surge flank alteration value presented Su-RG-SU-?AVG with 2.80±0.74 units. Surge vicinage alteration value presented Su-RG-VI-?AVG with 0.55±0.21 units. BDRLs formed in the welter-rough state expanded the realization level to form a square-shape-dot. We speculated that the surge realization gestalt might be scattered according to the square formed by the welter-through gestalt. By varying the short-syllables with various syllable techniques, we found that BDRL of ability to distinguish between short-syllables required for the realization level emerged. This degree of scattering allowed us to characterize the surge realization gestalt in short-syllables and paved the way for the use of welter-rough level data for the welter realization system.

Demonstration of the refraction of magnetic field lines in a magnetic material

Teaching physics needs effective educational demonstrations for each important section, which allow organising intensive learning activity of students and confirming or substantiating the theory being studied. However, in a number of cases, such demonstrations are not available for purely technical reasons: the difficulty of organisation, the lack of instruments and materials suitable for conducting simple educational experiments. The impossibility to demonstrate the effect of refraction of magnetic field lines at the boundaries of magnets is due to the absence of materials with a convenient value of magnetic permeability μ of the order of several units. This article describes a simple method for obtaining material with an effective macroscopic value of μ r ∼ 2 and provides the results of the related lecture demonstrations.

A Study on Tourist Satisfaction of Fujian Traditional Village Tourism Based on Perceived Value

The traditional village is a carrier of profound ethnic history and cultural heritage. However, it is facing unprecedented dual challenges of "protective decay" and "constructive decay" in an open environment, posing severe challenges to inheritance and development in the process of modernization. In recent years, traditional villages rich in cultural heritage and scenic resources have exhibited strong appeal to tourists. Nonetheless, issues persist, such as low tourist satisfaction with tourism products, inadequate professionalism among service providers, and weak market competitiveness, which hinder these traditional villages from meeting market demands.
 In this context, exploring the relationship between tourist perceived value, satisfaction, and loyalty can enhance the competitive edge of traditional villages in Fujian's tourism market. From the perspective of tourist perception, an evaluation model of "perceived value - satisfaction - loyalty" was constructed and empirically studied. The model consists of three major factors: tourist perceived value, tourist satisfaction, and tourist loyalty, along with 33 observed factors influencing these three main factors, forming a linear structural relationship. The results indicate that, in addition to societal value, various aspects of perceived value such as scenic value, cost value, emotional security value, service value, project facilities value, and convenient transportation value all significantly positively influence tourist satisfaction in Fujian's traditional village tourism. Tourist satisfaction also significantly positively affects tourist loyalty, while tourist perceived value indirectly influences loyalty through satisfaction. The influencing paths of each variable are not identical. Based on this, focusing on the aspect of perceived value in traditional village tourism, recommendations are provided for the development of traditional village tourism in Fujian.

Factors Driving the Use of Video on Demand (VoD)

The purpose of this research is to investigate the factors that influence the current and future use of VoD applications. The factors investigated based on perceived value are ease of use, convenience value, monetary value, emotional value, social value and identity salience. In addition, predictions are made on the factors of user value in understanding the use of VoD. The research design uses a survey of users who subscribe to VoD services in Jabodetabek. The target sample is 300 VoD users. The data analysis method uses the partial least square-structural equation modeling (PLS-SEM).

Motion Planning for Autonomous Driving: The State of the Art and Future Perspectives

Intelligent vehicles (IVs) have gained worldwide attention due to their increased convenience, safety advantages, and potential commercial value. Despite predictions of commercial deployment by 2025, implementation remains limited to small-scale validation, with precise tracking controllers and motion planners being essential prerequisites for IVs. This paper reviews state-of-the-art motion planning methods for IVs, including pipeline planning and end-to-end planning methods. The study examines the selection, expansion, and optimization operations in a pipeline method, while it investigates training approaches and validation scenarios for driving tasks in end-to-end methods. Experimental platforms are reviewed to assist readers in choosing suitable training and validation strategies. A side-by-side comparison of the methods is provided to highlight their strengths and limitations, aiding system-level design choices. Current challenges and future perspectives are also discussed in this survey.

Implementation of Effect Inflection of Blasting Transition using LED on Porous Routing Position in Vitreous Humor

The vitreous humor was examined using LED, one of the non-invasive techniques. An acute-angle flare-out-blasting status with continuous broaden conversion was confirmed by irradiating a certain amount of LED on a round hemisphere. It was judged that twinkle-disparity cognition level (TDCL) was formed by several broaden cognition functions of the scattered signal generated for a few seconds from the irradiated LED. Flare-out-blasting was configured as a system according to the level of cognition, and a rugged conveyance technique was used to confirm the experimental conditions of the twinkle tactile-dot. The degree of scattering caused by the surrounding micro-vessels and foreign substances in the vitreous humor was different according to the tactile-dot level. The maximum average value formed in the flare-out-blasting status was calculated as the result value as a result of the acutely converted output of the TDCL. Broaden tactile-dot blasting presented broaden far transition value of Br-CF-FA-?MAX-AVG with 8.49±(-0.22) units. Broaden convenient transition value presented Br-CF-CO-?MAX-AVG with 2.08±(-0.84) units. Broaden flank transition value presented Br-CF-BR-?MAX-AVG with 1.03±(-0.35) units. Broaden vicinage transition value presented Br-CF-VI-?MAX-AVG with 0.16±(-0.02) units. TDCL formed in the flare-out-blasting status expanded the cognition level to form a tactile-dot. The ability of the broaden cognition function to be scattered according to the acute-angle in the flare-out-blasting function was evaluated. It was confirmed that the twinkle-disparity function necessary for the cognition level system appeared by using a rugged conveyance to examine the vitreous humor with a non-invasive rugged conveyance technique. These physical findings made it possible to characterize broaden cognition function in vitreous humor and laid the based on utilizing flare-out-blasting level data by the flare-out cognition system.

Detection of Spread-out Position for Pulse Changing-state of Porous Material-object in Dermis Layer

Grainy surface of moist skin is a stalk transition by grain transport containing monolayer or multilayer multiblock modules as superconductors. Brilliant-differentiation cognition level (BIAL) is conveyed the stiff spread-out-sonance status within the skin to the stalk cognition level function and used a technique of mixing by pulse change. In order to observe the spread-out-sonance status within the skin with the stalk conveyance function, the stalk value with ductile-dot was found and calculated by the superstructure. In the dermis layer, the criterion of brilliant-differentiation level is transition signal by stalk sonance function. Configured as the cognition level and the technical concept of pulse change was measured by the diffusion sonance function that converted into BIAL value by the maximum average. According to the degree of water distribution in the skin, the degree of pulse change was configured as the cognition level of the sonance function, and the value was formed. Stalk ductile-dot sonance presented stalk far transition value of St-CF-FA-?MAX-MED with 11.34±5.57 units. Stalk convenient transition value presented St-CF-CO-?MAX-MED with 2.04±0.51 units. Stalk flank transition value presented St-CF-ST-?MAX-MED with 1.21±0.18 units. Stalk vicinage transition value presented St-CF-VI-?MAX-MED with 0.19±0.11 units. As the degree of ability of the ductile-dot is evaluated spread-out sonance by diffusion function that appeared at the stalk cognition level of the porous material-object by BIAL in the dermis layer. As a differentiation function can be used by the conveyance level system of the dermis layer. Diffusion cognition systems are suppressed by differential signals. Cognition systems is able to exploit the data as promising primary tools for analyzing surfaces from fundamental applications and nanotechnology perspectives.

Designing Nanoliposome-in-Natural Hydrogel Hybrid System for Controllable Release of Essential Oil in Gastrointestinal Tract: A Novel Vehicle.

In this study, thyme essential oil (essential oil to total lipid: 14.23, 20, 25, and 33.33%)-burdened nanoliposomes with/without maltodextrin solution were infused with natural hydrogels fabricated using equal volumes (1:1, v/v) of pea protein (30%) and gum Arabic (1.5%) solutions. The production process of the solutions infused with gels was verified using FTIR spectroscopy. In comparison to the nanoliposome solution (NL1) containing soybean lecithin and essential oil, the addition of maltodextrin (molar ratio of lecithin to maltodextrin: 0.80, 0.40, and 0.20 for NL2, NL3, and NL4, respectively) to these solutions led to a remarkable shift in particle size (487.10-664.40 nm), negative zeta potential (23.50-38.30 mV), and encapsulation efficiency (56.25-67.62%) values. Distortions in the three-dimensional structure of the hydrogel (H2) constructed in the presence of free (uncoated) essential oil were obvious in the photographs when compared to the control (H1) consisting of a pea protein-gum Arabic matrix. Additionally, the incorporation of NL1 caused visible deformations in the gel (HNL1). Porous surfaces were dominant in H1 and the hydrogels (HNL2, HNL3, and HNL4) containing NL2, NL3, and NL4 in the SEM images. The most convenient values for functional behaviors were found in H1 and HNL4, followed by HNL3, HNL2, HNL1, and H2. This hierarchical order was also valid for mechanical properties. The prominent hydrogels in terms of essential oil delivery throughout the simulated gastrointestinal tract were HNL2, HNL3, and HNL4. To sum up, findings showed the necessity of mediators such as maltodextrin in the establishment of such systems.

Influence of E-Service Quality on Continuance Intention with Customer Satisfaction as an Intervening Variable on LinkAja Application Users in Bandung City

The development of electronic money in Indonesia has made many people start to switch to digital payment modes as an easy solution for conducting various non-cash transactions. The city of Bandung, one of the most densely populated cities in Indonesia, is the city with the most digital payment users. One of the digital payment applications used is LinkAja. This research was conducted to determine the factors that influence the intention to continue the use of the LinkAja application in the city of Bandung. These factors include e-service quality, customer satisfaction, perceived trust, perceived risk. convenience, social value, attitude, and effort expectancy. This study used a quantitative method through data collection by distributing questionnaires online to people who live in the city of Bandung as many as 260 respondents. Data analysis techniques using Structural Equation Modeling (SEM), that is Partial Least Square (PLS) with SmartPLS v.3.2.9 software. Based on the analysis that has been done, the findings in this study indicate that perceived trust, convenience, and social value have a significant positive effect on customer satisfaction. Then, customer satisfaction has a significant positive effect on attitude. Besides that, e-service quality significant positive effect on perceived trust, customer satisfaction, continuance intention, attitude, and effort expectancy LinkAja application users in the city of Bandung. Meanwhile, Attitude also has a significant positive effect on continuance intention, the perceived risk has no significant negative effect on continuance intention. However, effort expectancy has no significant positive effect on continuance intention directly to LinkAja application users in the city of Bandung. This study recommends that LinkAja application service providers must maintain its service quality and create competitive advantages in service quality, so that the number of customer satisfaction and continuance intention to continue the use of the LinkAja application in the city of Bandung increase.

Enhanced room temperature relative permittivity and low dielectric loss ferroelectric double perovskite for energy storage applications

The polycrystalline ceramic oxide, BaBi1.2Fe0.8TiO6 is synthesized by a mixed oxide method at 1000 °C. XRD and Rietveld's analysis suggests a tetragonal system and P4mm space group. The closely spaced dense micro grains of various shapes and sizes in scanning electron micrograph (SEM) image support the polycrystalline single-phase compound. The UV–Visible spectroscopy results in a convenient value of threshold wavelength (610 nm), absorption bandgap energy (2.23 eV), and reflectance bandgap energy (2.31 eV) which are good responses to the IR and visible range and its possible application in photocatalytic devices. The room temperature (RT) polarization loop shows non-zero remanent polarization, i.e. ferroelectric property of the compound. Relatively higher room temperature dielectric permittivity (ɛr = 2455) with low loss tangent (tanδ) = 0.247 at 100 Hz, phase transition (Td > 200 °C), and Curie (Tc > 470 °C) temperature values are supporting to be as good dielectric material for ceramic capacitors. Transport property shows lower RT current density is in order of 1E-9 at 300 V/cm. The compound follows the Arrhenius equation and results in imminent values of activation energy in ac conductivity (Ea = 0.847 eV at 100 Hz) and dc conductivity (Ea = 0.838 eV) analysis. Based on the results, the present compound is likely to be used as a dielectric material in ceramic capacitors, energy and memory storage devices, and photocatalytic devices.

Comparison of quantitative volumetric analysis and linear measurement for predicting the survival of Barcelona Clinic Liver Cancer 0- and A stage hepatocellular carcinoma after radiofrequency ablation.

The prognostic role of the tumor volume in patients with hepatocellular carcinoma (HCC) at the Barcelona Clinic Liver Cancer (BCLC) 0 and A stages remains unclear. This study aims to compare the volumetric measurement with linear measurement in early HCC burden profile and clarify the optimal cut-off value of the tumor volume. The consecutive patients diagnosed with HCC who underwent initial and curative-intent radiofrequency ablation (RFA) were included retrospectively. The segmentation was performed semi-automatically, and enhanced tumor volume (ETV) as well as total tumor volume (TTV) were obtained. The patients were categorized into high- and low-tumor burden groups according to various cutoff values derived from commonly used diameter values, X-tile software, and decision-tree analysis. The inter- and intra-reviewer agreements were measured using the intra-class correlation coefficient. Univariate and multivariate time-to-event Cox regression analyses were performed to identify the prognostic factors of overall survival. A total of 73 patients with 81 lesions were analyzed in the whole cohort with a median follow-up of 31.0 (interquartile range: 16.0–36.3). In tumor segmentation, excellent consistency was observed in intra- and inter-reviewer assessments. There was a strong correlation between diameter-derived spherical volume and ETV as well as ETV and TTV. As opposed to all linear candidates and 4,188 mm3 (sphere equivalent to 2 cm in diameter), ETV >14,137 mm3 (sphere equivalent to 3 cm in diameter) or 23,000 mm3 (sphere equivalent to 3.5 cm in diameter) was identified as an independent risk factor of survival. Considering the value of hazard ratio and convenience to use, when ETV was at 23,000 mm3, it was regarded as the optimal volumetric cut-off value in differentiating survival risk. The volumetric measurement outperforms linear measurement on tumor burden evaluation for survival stratification in patients at BCLC 0 and A stages HCC after RFA.

Small things, big impact: The network-mediated spillover effect through a transport connectivity enhancement project

This study examines a 4.3 km expansion of Singapore's metro transit system. Despite a short line, it better connected existing lines and improved the connectivity levels of numerous stations across the city, as evidenced by connectivity indices. The improvement allowed residents living near those stations to access other places more easily, leading to greater convenience and higher home value in those stations' neighborhoods. Using difference-in-differences to compare housing price and connectivity changes in all neighborhoods with or without a station, we find that a 1% improvement in connectivity can increase local housing prices by 0.37%. The identification is anchored to the broad impact of the network reconfiguration, which was caused by the new transport infrastructure, on the connectivity changes in distant areas. Several techniques and tests enhance robustness. These include an estimation of the treatment boundary that defines proximity to stations, propensity score matching or weighting to mitigate sample imbalance, event study for the parallel trend, parameter sensitivity tests, etc. The research highlights that a small transport project can generate broad impacts on the whole city.

Assessing the determinants of customer-perceived value and customer satisfaction in e-hailing services: An Importance-Performance Matrix Analysis (IPMA) Approach

The rapid growth and success of sharing economy, particularly e-hailing services, have attracted many organisations to participate in this business. As a result, e-hailing organisations need strategies that enable them to compete in the market. One of the strategies that could help e-hailing organisations to stay competitive is to understand users’ perception of value. The aim of this study is to identify the values that users gain when they use e-hailing services. From there, this study also sought to determine the specific values, which contribute to satisfaction with e-hailing services. The Theory of Consumption Value was applied to examine as users’ perceived value with the inclusion of sustainability value. Based on the Partial Least Squares analysis via the software SmartPLS 3.2.8, users’ perceived value, which consists of economic value, convenience value, sustainability value, and hedonic value positively influences users’ satisfaction, while symbolic value negatively influences users’ satisfaction. The Importance-Performance Matrix Analysis (IPMA) results revealed that hedonic value is the most important value that contributes to users’ satisfaction. Theoretical and managerial implications as well as research limitations are duly discussed.

Effects of adding nano-emulsified plant oil and probiotics to drinking water during different periods besides sex on processing characteristics, physicochemical properties, and meat quality traits of broiler chickens.

High-quality meat is one of the consumer demands. Therefore, several studies have concluded that supplementing broilers with natural additives can improve meat quality. This study was carried out to evaluate the effects of nano-emulsified plant oil (Magic oil®) and probiotic (Albovit®) as water additives (at the rate of 1 ml/L and 0.1 g/L, respectively) during different growing periods on processing characteristics, physicochemical properties, and meat quality traits of broilers chickens. A total number of 432-day-old Ross broiler chicks were randomly assigned to one of six treatment groups according to the growing periods in which magic oil and probiotics were added to drinking water, each with nine replicates and eight birds per replicate (4♂ and 4♀). On day 35, birds' processing characteristics, physicochemical properties, and meat quality traits were examined. The results showed that treatments had a significant (P < 0.001) impact on cooking loss, cohesiveness, and chewiness. The male broiler chickens had higher (P ≤ 0.05) initial lightness, initial whiteness index, water holding capacity, shear force, live weight, hot and chilled carcass weights, as well as lower gizzard and neck percentages than females. The interactions between treatments and sex showed a significant (P < 0.001) impact on cooking loss, shear force, hardness, springiness, and chewiness. In conclusion, supplementing male broiler chickens with Magic oil and probiotic, particularly from 0-30 days of age had favorable meat chewiness as a result of lower cohesiveness and hardness higher springiness, and the most convenient cooking loss value. Magic oil and probiotic, especially in males, is advisable to be supplemented in water of growing broilers chicken programs from 0 to 30 days of age. Moreover, further studies under commercial conditions are recommended to locate the most favorable combination of Magic oil/probiotic supplements for the best processing characteristics and meat quality attributes outcomes.