Convection-permitting Regional Climate Model Research Articles

Impact of climate change on crop suitability in sub-Saharan Africa in parameterized and convection-permitting regional climate models

Due to high present-day temperatures and reliance on rainfed agriculture, sub-Saharan Africa is highly vulnerable to climate change. We use a comprehensive set of global (CMIP5) and regional (CORDEX-Africa) climate projections and a new convection-permitting pan-Africa simulation (and its parameterized counterpart) to examine changes in rainfall and temperature and the impact on crop suitability of maize, cassava and soybean in sub-Saharan Africa by 2100 (RCP8.5). This is the first time an explicit-convection simulation has been used to examine crop suitability in Africa. Increasing temperatures and declining rainfall led to large parts of sub-Saharan Africa becoming unsuitable for multiple staple crops, which may necessitate a transition to more heat and drought resistant crops to ensure food and nutrition security. Soybean was resilient to temperature increases, however maize and cassava were not, leading to declines in crop suitability. Inclusion of sensitivity to extreme temperatures led to larger declines in maize suitability than when this was excluded. The results were explored in detail for Tanzania, Malawi, Zambia and South Africa. In each country the range of projections included wetting and drying, but the majority of models projected rainfall declines leading to declines in crop suitability, except in Tanzania. Explicit-convection was associated with more high temperature extremes, but had little systematic impact on average temperature and total rainfall, and the resulting suitability analysis. Global model uncertainty, rather than convection parameterizations, still makes up the largest part of the uncertainty in future climate. Explicit-convection may have more impact if suitability included a more comprehensive treatment of extremes. This work highlights the key uncertainty from global climate projections for crop suitability projections, and the need for improved information on sensitivities of African crops to extremes, in order to give better predictions and make better use of the new generation of explicit-convection models.

Convection-permitting regional climate simulation of warm-season precipitation over Eastern China

Convection-permitting regional climate models have been shown to improve precipitation simulation in many aspects, such as the diurnal cycle, precipitation frequency, intensity and extremes in many studies over several geographical regions of the world, but their skill in reproducing the warm-season precipitation characteristics over the East Asia has not been robustly tested yet. Motivated by recent advances in computing power, model physics and high-resolution reanalysis, we use the convection-permitting weather research and forecasting (WRF) model configured with 3 km grid spacing to simulate the warm-season precipitation in eastern China for 10 seasons (2008–2017). The hourly 31-km-resolution ERA5 reanalysis data are used to provide initial and boundary conditions for the simulations. The objectives are (1) to evaluate the model skill in simulating warm-season precipitation climatology in the East Asian monsoon region, (2) to identify the promises and problems of the convection-permitting simulation, and (3) to investigate solutions for the model deficiencies. Results demonstrate that the 3-km-resolution WRF model reasonably reproduces the spatial characteristics of seasonal and sub-seasonal precipitation, the seasonal meridional migration associated with the summer monsoon activity, the diurnal variation phase and amplitude, and the propagating convection east of the Tibetan Plateau. The major deficiency is that the model overestimates precipitation amount, especially in the afternoon. Analysis and sensitivity experiments suggest that improved treatment of sub-grid cloud fraction and the aerosol effects may help to suppress the oft-reported high precipitation bias. These results provide useful guidance for improving the model skill at simulating warm-season precipitation in East Asia.

Extreme rainfall in Mediterranean France during the fall: added value of the CNRM-AROME Convection-Permitting Regional Climate Model

South-East France is a region often affected by heavy precipitating events the characteristics of which are likely to be significantly impacted in the future climate. In this study, cnrm-arome, a Convection-Permitting Regional Climate Model with a 2.5 km horizontal resolution is compared to its forcing model, the Regional Climate Model aladin-climate at a horizontal resolution of 12.5 km, self-driven by the era-interim reanalysis. An hourly observation dataset with a resolution of 1 km, comephore, is used in order to assess simulated surface precipitation from a seasonal to hourly scale. The representation of the spatial pattern of fall precipitation climatology is improved by cnrm-arome. It also shows a clear added value with respect to aladin-climate through the improvement of the localization and intensity of extreme rainfall on a daily and hourly time scale on both fine and coarse spatial scales (2.5, 12.5 and 50 km). cnrm-arome in particular is able to simulate intense rainfall on lowlands and makes sub-daily rainfall events more intense than aladin-climate. cnrm-arome still underestimates very extreme precipitation from above 30 mm/h or 230 mm/day.

Systematic increases in the thermodynamic response of hourly precipitation extremes in an idealized warming experiment with a convection-permitting climate model

Changes in sub-daily precipitation extremes potentially lead to large impacts of climate change due to their influence on soil erosion, landslides, and flooding. However, these changes are still rather uncertain, with only limited high-resolution results available and a lack of fundamental knowledge on the processes leading to sub-daily extremes. Here, we study the response of hourly extremes in a convection-permitting regional climate model (CPRCM) for an idealized warming experiment—repeating present-day observed weather under warmer and moister conditions. Ten months of simulation covering summer and early autumn for two domains over western Central Europe and western Mediterranean are performed. In general, we obtain higher sensitivities to warming for local-scale extreme precipitation at the original grid-scale of 2.5–3 km than for aggregated analyses at a scale of 12–15 km, representative for currently conventional regional climate models. The grid-scale sensitivity over sea, and in particular over the Mediterranean Sea, approaches 12%–16% increase per degree, close to two times the Clausius–Clapeyron (CC) relation. In contrast, over the dry parts of Spain the sensitivity is close to the CC rate of 6%–7% per degree. For other land areas, sensitivities are in between these two values, with a tendency for the cooler and more humid areas to show lower scaling rates for the most intense hourly precipitation, whereas the land area surrounding the Mediterranean Sea shows the opposite behaviour with the largest increases projected for the most extreme hourly precipitation intensities. While our experimental setup only estimates the thermodynamic response of extremes due to moisture increases, and neglects a number of large-scale feedbacks that may temper future increases in precipitation extremes, some of the sensitivities reported here reflect findings from observational trends. Therefore, our results can provide guidance within which to understand recent observed trends and for future climate projections with CPRCMs.

Long-Term Atmospheric Changes in a Convection-Permitting Regional Climate Model Hindcast Simulation over Northern Germany and the German Bight

Long-term atmospheric changes are a result of complex interactions on various spatial scales. In this study, we examine the long-term variability of the most important meteorological variables in a convection-permitting regional climate model simulation. A consistent, gridded data set from 1948 to 2014 was computed using the regional climate model COSMO-CLM with a very high convection-permitting resolution at a grid distance of 2.8 km, for a region encompassing the German Bight and Northern Germany. This is one of the very first atmospheric model simulations with such high resolution, and covering several decades. Using a very high-resolution hindcast, this study aims to extend knowledge of the significance of regional details for long-term variability and multi-decadal trends of several meteorological variables such as wind, temperature, cloud cover, precipitation, and convective available potential energy (CAPE). This study demonstrates that most variables show merely large decadal variability and no long-term trends. The analysis shows that the most distinct and significant positive trends occur in temperature and in CAPE for annual mean values as well as for extreme events. No clear and no significant trend is detectable for the annual sum of precipitation and for extreme precipitation. However, spatial structures in the trends remain weak.

Current Status of Convection-Permitting Regional Climate Models

The current status of convection-permitting regional climate models is reported. First, the outline of regional climate models is described. Next, the representation of clouds in regional climate models is mentioned. Subsequently, the performance of numerical simulations using convection-permitting regional climate models is presented. In particular, the effects of high-resolution topography on the performance of simulations are discussed. Finally, an example of future climate projections using convection-permitting regional climate models is introduced.

Anthropogenic influences on major tropical cyclone events

There is no consensus on whether climate change has yet affected the statistics of tropical cyclones, owing to their large natural variability and the limited period of consistent observations. In addition, projections of future tropical cyclone activity are uncertain, because they often rely on coarse-resolution climate models that parameterize convection and hence have difficulty in directly representing tropical cyclones. Here we used convection-permitting regional climate model simulations to investigate whether and how recent destructive tropical cyclones would change if these events had occurred in pre-industrial and in future climates. We found that, relative to pre-industrial conditions, climate change so far has enhanced the average and extreme rainfall of hurricanes Katrina, Irma and Maria, but did not change tropical cyclone wind-speed intensity. In addition, future anthropogenic warming would robustly increase the wind speed and rainfall of 11 of 13 intense tropical cyclones (of 15 events sampled globally). Additional regional climate model simulations suggest that convective parameterization introduces minimal uncertainty into the sign of projected changes in tropical cyclone intensity and rainfall, which allows us to have confidence in projections from global models with parameterized convection and resolution fine enough to include tropical cyclones.

Is there added value of convection-permitting regional climate model simulations for storms over the German Bight and Northern Germany?

Is there added value of convection-permitting regional climate model simulations for storms over the German Bight and Northern Germany?

Scale dependency of regional climate modeling of current and future climate extremes in Germany

A warmer climate is projected for mid-Europe, with less precipitation in summer, but with intensified extremes of precipitation and near-surface temperature. However, the extent and magnitude of such changes are associated with creditable uncertainty because of the limitations of model resolution and parameterizations. Here, we present the results of convection-permitting regional climate model simulations for Germany integrated with the COSMO-CLM using a horizontal grid spacing of 1.3 km, and additional 4.5- and 7-km simulations with convection parameterized. Of particular interest is how the temperature and precipitation fields and their extremes depend on the horizontal resolution for current and future climate conditions. The spatial variability of precipitation increases with resolution because of more realistic orography and physical parameterizations, but values are overestimated in summer and over mountain ridges in all simulations compared to observations. The spatial variability of temperature is improved at a resolution of 1.3 km, but the results are cold-biased, especially in summer. The increase in resolution from 7/4.5 km to 1.3 km is accompanied by less future warming in summer by 1 ∘C. Modeled future precipitation extremes will be more severe, and temperature extremes will not exclusively increase with higher resolution. Although the differences between the resolutions considered (7/4.5 km and 1.3 km) are small, we find that the differences in the changes in extremes are large. High-resolution simulations require further studies, with effective parameterizations and tunings for different topographic regions. Impact models and assessment studies may benefit from such high-resolution model results, but should account for the impact of model resolution on model processes and climate change.

Projection of Future Climate Change over Japan in Ensemble Simulations Using a Convection-Permitting Regional Climate Model with Urban Canopy

Projection of Future Climate Change over Japan in Ensemble Simulations Using a Convection-Permitting Regional Climate Model with Urban Canopy

Do Convection-Permitting Regional Climate Models Improve Projections of Future Precipitation Change?

Abstract Regional climate projections are used in a wide range of impact studies, from assessing future flood risk to climate change impacts on food and energy production. These model projections are typically at 12–50-km resolution, providing valuable regional detail but with inherent limitations, in part because of the need to parameterize convection. The first climate change experiments at convection-permitting resolution (kilometer-scale grid spacing) are now available for the United Kingdom; the Alps; Germany; Sydney, Australia; and the western United States. These models give a more realistic representation of convection and are better able to simulate hourly precipitation characteristics that are poorly represented in coarser-resolution climate models. Here we examine these new experiments to determine whether future midlatitude precipitation projections are robust from coarse to higher resolutions, with implications also for the tropics. We find that the explicit representation of the convective storms themselves, only possible in convection-permitting models, is necessary for capturing changes in the intensity and duration of summertime rain on daily and shorter time scales. Other aspects of rainfall change, including changes in seasonal mean precipitation and event occurrence, appear robust across resolutions, and therefore coarse-resolution regional climate models are likely to provide reliable future projections, provided that large-scale changes from the global climate model are reliable. The improved representation of convective storms also has implications for projections of wind, hail, fog, and lightning. We identify a number of impact areas, especially flooding, but also transport and wind energy, for which very high-resolution models may be needed for reliable future assessments.

Evaluation of precipitation over an oceanic region of Japan in convection-permitting regional climate model simulations

We investigated the performance of a convection-permitting regional climate model with respect to precipitation in the present climate around the southwestern oceanic region of Japan. The effects of explicit representation of convective processes without cumulus parameterization can be properly estimated by using a model domain without complex topography or convoluted coastlines. The amounts of annual and monthly precipitation and the frequencies of daily and hourly precipitation were well reproduced by the convection-permitting model with a 2-km grid spacing, and its performance was better than that of a model with a coarser mesh. In particular, the frequencies of hourly precipitation in the convection-permitting simulation matched the observed frequencies for precipitation intensities below 20 mm h−1. Above intensities of 20 mm h−1, however, the convection-permitting model tended to overestimate the frequency of hourly precipitation. To explore the mechanism of this overestimation of heavy hourly precipitation, the sensitivity of the frequency distribution of precipitation to the horizontal resolution was tested by changing the horizontal grid spacing of the model from 2 to 4 km and then 1.5 km. The results showed that the overestimation was increased when the horizontal resolution was coarser, owing to spurious grid-scale precipitation, which causes heavy precipitation to be highly concentrated in a single grid. This spurious grid-scale precipitation may be caused by insufficient representation of convective downdrafts in convection-permitting simulations by models with coarser resolutions.