Supply Control Research Articles

A novel adaptive fast sliding mode control method based on fuzzy algorithm for the air management system of fuel cell stack

Proton exchange membrane fuel cells (PEMFCs) offer advantages, such as, cleanliness, high efficiency, and environmental friendliness. To achieve optimal control of the PEMFC stack's air supply and management system under complex operating conditions, a novel non-singular terminal sliding mode controller based on fuzzy algorithm is proposed. Compared with the conventional sliding mode control, the terminal sliding mode control exhibits further performance improvements. However, it still has limitations. The proposed innovative sliding mode structure would ensure finite-time convergence and avoid the issue of singularity associated with terminal sliding mode control. Moreover, fuzzy logic makes sliding mode gain adapt to the system and further enhances the performance and stability, which is benefited from a stronger sliding surface. Results indicate that, compared with the other controllers, the designed controller could reduce delay further and provide faster response to sudden changes. The overshoot of sliding surface has decreased by 70% compared to its previous level. This novel control approach significantly enhances the efficiency and reliability of the PEMFC system.

Research on Supply Chain Risk Prevention and Control of Medical Products Enterprises

This paper firstly analyzes the mode, development background and development status of the medical products supply chain, and finds that the medical products market shows an expanding trend, which requires the prevention and control of supply chain risks. Secondly, this paper identifies the risk factors existing in its current development, mainly supply risk, logistics risk, demand risk, information risk and cooperation risk, and analyzes the five types of risk in detail, points out the risk factors existing in each risk, and enumerates the impacts of each risk on each link of the medical products supply chain. Again, this paper combines the relevant risk factors to propose specific supply chain management countermeasures from three aspects, namely: using innovative digital supply chain models, optimizing internal supply chain processes, and improving the standardized management of medical products production. Finally, the whole paper is summarized and relevant conclusions are drawn, aiming to provide some references for giving full play to the role of medical products supply chain.

TS fuzzy control of PV assisted single phase three phase induction motor drive for rural pumping applications

The motor drives for aqua farms and large-scale irrigation system needs a reliable electric drive, which requires the continuous power supply and efficient control. However, the rural single phase power supply is frequently interrupted. Renewable assistance would improve the availability of supply and heuristic control approach improves robustness in control. This paper presents a three phase induction motor drive fed from single phase electric grid with assistance from PV and battery energy storage. TS- fuzzy based direct torque control is employed for robust control during load changes, and the topology, component modelling, front-end converter control, PV interface DC–DC converter control, and inverter control are presented. MATLAB/Simulink is used to simulate the proposed drive system. The performance of the proposed system is validated using simulation data for both steady-state and transient states.

Spatial distribution of drinking, irrigation water quality, and health risk indices of high-altitude lakes

High-altitude lakes (HAL) play a key role in several ecological services of the environment by managing the water supply and flood control. The slow rate of inflowing contaminant circulation results in a buildup of higher levels of contamination level and makes these lakes more vulnerable. The present study focused on determining HAL's water quality parameters (WQP) in the Swat District, northern Pakistan. Water samples (n = 32) were collected and analyzed for basic parameters, anions, and potentially harmful elements (PHE). Results of examined parameters were noted under WHO threshold values, except for a few samples of iron (Fe) and arsenic (As). The concentrations of WQP in HAL were used to calculate drinking and irrigation water quality indices (WQI). Results revealed that the water of HAL was excellent and suitable for drinking and irrigation purposes. Gibbs plot and Piper model were used to identify water as a mixed type and source characterization of rock dominance. Water quality data were used for average daily dose (ADD) and hazard quotient (HQ) to find HAL water's potential health risks. The highest ADD value of 188 μg/kg-day was observed for nitrate (NO3), and the lowest of 0.31 μg/kg-day was noted for arsenic (As). However, maximum HQ values of 0.18 were reported for As and were observed to be less than the threshold of 1. Therefore, based on water quality, the HAL was recommended for use in drinking, domestic, and irrigation purposes.

ANALISIS PENGARUH INSTRUMEN PEMBAYARAN NON-TUNAI (APMK DAN UANG ELEKTRONIK) TERHADAP MONEY MULTIPLIER

The increasing use of non-cash payment instruments in Indonesia, such as Card Payment Instrument (APMK) and electronic money, shows public awareness and confidence in switching from cash. This has an impact on the money multiplier. The money multiplier plays an important role in the formation of money supply and monetary control. The stability of the money multiplier can provide greater opportunities for Bank Indonesia to implement policies effectively in influencing the supply of money in circulation so the ultimate goal of monetary aggregates can be achieved and a conducive atmosphere for the economy is created. This research aims to determine the influence of ATM+Debit card, credit card and electronic money variables on the money multiplier in Indonesia. In connection with this, the author uses the Error Correction Model (ECM) as an analysis method in this research. The research results show that the Card Payment Instrument (APMK) variable through the nominal transactions of ATM+Debit card and credit card and the nominal transactions of electronic money have significant positive effect on the value of the money multiplier in Indonesia in both the short and long term. It means when the nominal variable for ATM+Debit card, credit card, and electronic money transactions increases, the value of the money multiplier will also increase and vice versa. The increasing use of non-cash payment instruments in Indonesia, such as Card Payment Instrument (APMK) and electronic money, shows public awareness and confidence in switching from cash. This has an impact on the money multiplier. The money multiplier plays an important role in the formation of money supply and monetary control. The stability of the money multiplier can provide greater opportunities for Bank Indonesia to implement policies effectively in influencing the supply of money in circulation so the ultimate goal of monetary aggregates can be achieved and a conducive atmosphere for the economy is created. This research aims to determine the influence of ATM+Debit card, credit card and electronic money variables on the money multiplier in Indonesia. In connection with this, the author uses the Error Correction Model (ECM) as an analysis method in this research. The research results show that the Card Payment Instrument (APMK) variable through the nominal transactions of ATM+Debit card and credit card and the nominal transactions of electronic money have significant positive effect on the value of the money multiplier in Indonesia in both the short and long term. It means when the nominal variable for ATM+Debit card, credit card, and electronic money transactions increases, the value of the money multiplier will also increase and vice versa.

Design and Implementation of Chopper Control System for HIAF

The chopper control system which is synchronized by the White Rabbit timing network is designed and implemented to meet the requirements of the chopper of ion source for the High-Intensity Heavy Ion Accelerator Facility (HIAF). The hardware system consists of timing modulation controller, waveform acquisition, parameter setting, and remote control of the chopper power supply. The software includes low-level drivers and top-level applications which are based on Experimental Physics and Industrial Control System (EPICS). The combination of hardware and software completes the interaction of timing messages with the White Rabbit network, waveform acquisition, the setting of timing modulation parameters in several running modes, and remote control of the chopper power supply, etc. The test results show that the system can achieve timing modulation with a resolution of 8 ns and waveform acquisition of embedded EPICS IOC (input/output controller) at a 125 MHz sample rate. The design, implementation, and test of the chopper control system are described in this paper.

Energy Harvest of Multiple Smart Sensors With Real-Time Fault-Detection

For multiple smart sensors with limited energy supply, the relationship between the energy supply and sensor fault-free region is often unknown, and neither of the interior structure nor exterior circumstance modeling the smart sensors is easy to accurately achieve, so how to guarantee the fault-free smart sensors to harvest the most energy in the fault-free way is a very challenging topic. To address this issue, this paper first formulates the individual smart sensor as a single-input single-output (SISO) model-free system (MFS), with its energy supply and sensing error as the input and output, respectively, then makes use of Lyapunov function to deduce an upper bound of the fault-free region to realize the fault-detection of any smart sensor and disclose the relationship between the energy supply and fault-free region, and finally achieves the optimal energy supply guiding the overall energy harvest of all fault-free smart sensors to converge to the maximum with the convergence rate no larger than <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\kappa$</tex-math> </inline-formula> , <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\kappa\in[0,1]$</tex-math> </inline-formula> , while enjoying the real-time fault-detection. An algorithm based on the sound theoretical foundations is further proposed to implement the optimal energy supply. Theoretical analysis, simulations and field experiments jointly verify the performance of our method. To our best knowledge, it is the initial work towards this issue. <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">Note to Practitioners</i> —This paper addresses the interesting issue of how to guarantee multiple smart sensors to harvest the most energy in the free-fault way. Through the insightful disclosure of relationship between the energy supply and sensor fault-free region, and the optimal control of energy supply, this paper facilitates the overall energy harvest of all fault-free smart sensors that work under the environments, where the available energy is limited, to converge to the maximum while enjoying the real-time fault-detection, which we believe could push the development of Internet of Things (IoT) or Cyber-Physical System (CPS) that employs multiple smart sensors to sense the physical world. Simulations and field experimental investigations jointly show that the proposed solution outperforms the existing solutions.

An ingestible near-infrared fluorescence capsule endoscopy for specific gastrointestinal diagnoses

Early diagnosis of gastrointestinal (GI) diseases is important to effectively prevent carcinogenesis. Capsule endoscopy (CE) can address the pain caused by wired endoscopy in GI diagnosis. However, existing CE approaches have difficulty effectively diagnosing lesions that do not exhibit obvious morphological changes. In addition, the current CE cannot achieve wireless energy supply and attitude control at the same time. Here, we successfully developed a novel near-infrared fluorescence capsule endoscopy (NIFCE) that can stimulate and capture near-infrared (NIR) fluorescence images to specifically identify subtle mucosal microlesions and submucosal lesions while capturing conventional white light (WL) images to detect lesions with significant morphological changes. Furthermore, we constructed the first synergetic system that simultaneously enables multi-attitude control in NIFCE and supplies long-term power, thus addressing the issue of excessive power consumption caused by the NIFCE emitting near-infrared light (NIRL). We performed in vivo experiments to verify that the NIFCE can specifically "light up" tumors while sparing normal tissues by synergizing with probes actively aggregated in tumors, thus realizing specific detection and penetration. The prototype NIFCE system represents a significant step forward in the field of CE and shows great potential in efficiently achieving early targeted diagnosis of various GI diseases.

URINARY SCHISTOSOMIASIS AMONG SCHOOL-AGE CHILDREN IN SELECTED RURAL COMMUNITIES IN HADHRAMOUT GOVERNORATE, YEMEN

Background: Urinary schistosomiasis is a potentially life-threatening public health issue in some areas of Yemen, particularly in Hadhramout rural communities. It is considered as one of the most common neglected tropical parasitic diseases. This study aimed to investigate the prevalence of urinary schistosomiasis and associated risk factors among school-age males and females in selected rural communities of Hadhramout, Yemen. Methods: A total of 450 students participated in this cross-sectional study. Urine samples were collected, then examined for haematuria and Schistosoma haematobium (S. haematobium) eggs using urine dipsticks and filtration technique respectively. To assess knowledge and practices regarding the transmission of urinary schistosomiasis, a pre-tested questionnaire was employed. Results: An overall (66)14.7% of participants tested positive for S. haematobium, and of those, 54 (12.0%) developed haematuria with a statistically significant difference (p=0.001). A total of 35(53.0% eggs/10 ml urine) had heavy intensity of infection, with a significant difference (p=0.001) between the different communities visited: high in Al-Dhulaya'a (18.2 eggs/10 ml urine) and low in Yabaith (6.1 eggs/10 ml urine). S. haematobium infection showed significantly higher (p=0.002) in males (13.8%) than females (0.9%), and increased with age of participants. Multivariate logistic analysis of risk factors were significantly associated with the prevalence of urinary schistosomiasis such as swimming activities (p=0.016), washing clothes (p=0.14), time spent in infested areas more than 15 minutes (p=0.012), habits of defecation/urination in open water sources (p=0.44), self-reported symptoms suggestive of the disease (p=0.03), participants with a history of illness (p=0.014), lack of awareness of schistosomiasis (p=0.050), and no prior treatment with praziquantel (p=0.001). Conclusions: Urinary schistosomiasis remains highly prevalent among schoolchildren in rural communities in Hadhramaut. The study highlights the urgent need to implement preventive measures, safe drinking water supply, proper sanitation, and vector control programs in order to reduce transmission and morbidity caused by schistosomiasis. Peer Review History: Received 3 December 2023; Revised 28 January 2024; Accepted 27 February; Available online 15 March 2024 Academic Editor: Dr. Marwa A. A. Fayed, University of Sadat City, Egypt, maafayed@gmail.com Average Peer review marks at initial stage: 6.0/10 Average Peer review marks at publication stage: 7.5/10 Reviewers: Dr. Owanaro Peter, Nigeria, Department of Clinical Pharmacy and Pharmacy Practice, Faculty of Pharmacy, Niger Delta University, Wilberforce Island, Bayelsa State, Nigeria. owonaropeter@gmail.com Dr. George Zhu, Tehran University of Medical Sciences, Tehran, Iran, sansan4240732@163.com

OPTIMAL CONDITIONS FOR LIME TREATMENT OF MINE WASTEWATER FROM POLYMETALLIC ORE MINES

Mine waters of polymetallic mines are multicomponent systems containing ions of heavy non-ferrous metals, calcium, magnesium, iron, ammonium, as well as chlorides, sulfates, fluorides and other components in a wide range of concentrations. As a rule, water purification of this type is carried out by the lime method, which provides a fairly high degree of extraction of the most toxic pollutants (metals), with relatively small material costs. Taking into account the large volume, complexity and variation of the composition of mine waters, the tasks of optimizing reagent consumption, methods of its supply and effective control of the purification process still do not lose their relevance. The article presents the results of laboratory studies to determine the optimal conditions for processing model solutions that provide the maximum degree of purification for specific conditions of the Irtysh mine (East Kazakhstan). Experimental data obtained on model solutions are confirmed by the results of purification of real mine waste water. The results of experiments with mine water confirmed that the selected pH region of 9.5–10.5 can be accepted as optimal, which will allow achieving a high degree of purification of mine water.

Real-Time Monitoring of Photovoltaic Systems and Control of Electricity Supply for Smart Micro Grid-PV using IoT

This paper aims to develop a photovoltaic (PV) performance monitoring system applied on a micro scale using the Internet of Things (IoT). Previous monitoring systems had limitations in platform flexibility, low-cost devices, hardware complexity, and stability of the data transfer process. For this reason, this research proposes an IoT architecture that uses Arduino devices, mini WIFI and an open-source platform, so that it can be easily developed further. This research also develops innovations in controlling the use of electrical energy sources from PV and utility networks. This monitoring system is applied to PV installations with a capacity of 1KW which is capable of monitoring electrical data in the form of current, voltage, power, energy and frequency obtained from PV panels, batteries, loads and electrical utilities. Monitoring data is displayed in a visual form that can be accessed via web-based and mobile applications. This research has developed an innovation in controlling the use of electrical energy sources from PV and Utility networks by using several sensors as parameters to determine the right time and condition in controlling the use of electrical resources.

Research on uninterruptable power supply technology for auxiliary winding of electric locomotive while passing the neutral section

PurposeAuxiliary power system is an indispensable part of the train; the auxiliary systems of both electric locomotives and EMUs mainly are powered by one of the two ways, which are either from auxiliary windings of traction transformers or from DC-link voltage of traction converters. Powered by DC-link voltage of traction converters, the auxiliary systems were maintained of uninterruptable power supply with energy from electric braking. Meanwhile, powered by traction transformers, the auxiliary systems were always out of power while passing the neutral section of power supply grid and control system is powered by battery at this time.Design/methodology/approachUninterrupted power supply of auxiliary power system powered by auxiliary winding of traction transformer was studied. Failure reasons why previous solutions cannot be realized are analyzed. An uninterruptable power supply scheme for the auxiliary systems powered by auxiliary windings of traction transformers is proposed in this paper. The validity of the proposed scheme is verified by simulation and experimental results and on-site operation of an upgraded HXD3C type locomotive. This scheme is attractive for upgrading practical locomotives with the auxiliary systems powered by auxiliary windings of traction transformers.FindingsThis scheme regenerates braking power supplied to auxiliary windings of traction transformers while a locomotive runs in the neutral section of the power supply grid. Control objectives of uninterrupted power supply technology are proposed, which are no overvoltage, no overcurrent and uninterrupted power supply.Originality/valueThe control strategies of the scheme ensure both overvoltage free and inrush current free when a locomotive enters or leaves the neutral section. Furthermore, this scheme is cost low by employing updated control strategy of software and add both the two current sensors and two connection wires of hardware.

Supply and demand balance control strategy for microgrids considering uncertainty and disturbance based on online H∞ policy iteration

Abstract With the rapid growth of renewable energy generation, its proportion in power generation is increasing. Accompanied by this, due to the uncertain characteristics of renewable energy generation, the issue of imbalanced power supply and demand in microgrids has posed, which brings great challenges to the reliability of microgrid. In recent years, how to use energy storage system to solve this problem has become a hot research topic in microgrid. In this paper, an online H∞ policy iteration algorithm is proposed to control the output power of photovoltaic arrays and micro-gas turbines. At the same time, considering the uncertainty of the load demand in the microgrid system and the input disturbance of the micro gas turbine governor, the power supply and demand relationship of the microgrid can be balanced by the proposed control strategy. Finally, the effectiveness and practicality of the control strategy were demonstrated through simulation analysis.

Functional Model of Supply Chain Waste Reduction and Control Strategies for Retailers—The USA Retail Industry

Background: The US retail sector grapples with persistent challenges related to supply chain waste, including inefficiencies, overstocking, and logistical barriers, necessitating targeted reduction strategies to mitigate escalating costs, environmental impacts, and diminished profitability. Methods: This study adopts a qualitative research method that draws on secondary data sources such as books, journals, articles, and websites to explore supply chain waste reduction strategies within the US retail industry. The study delineates various supply chain waste types, examines associated challenges and drivers, and proposes a simplified model tailored to the US retail landscape to enhance efficiency and sustainability through waste reduction and control. Results: The findings of this paper underscore the necessity for proactive measures within the US retail sector to minimize supply chain waste, optimize operations, and bolster environmental stewardship. Conclusions: By offering a comprehensive overview actionable insights and proposed reverse logistics model, this study aims to equip US retailers with strategies conducive to sustainable growth and heightened competitiveness while advancing the broader discourse on supply chain efficiency and waste reduction.

Rapid activation of proton exchange membrane fuel cell stack and underlying mechanisms involved

Activation is a crucial procedure to improve the performance of newly fabricated fuel cell stacks to meet the power requirements in actual application scenarios. However, traditional activation procedures generally last for several hours or even days, which greatly increases the cost and limits the production efficiency. In response to this problem, this paper proposes a rapid activation procedure composed of hydrogen pumping (HP) and limiting-current activation with limited air (LCA). The influence of current density for HP and air supply for LCA on activation effect is studied and the best operating conditions are determined. The importance of water supply to the cathode is highlighted during HP. The influence of air supply for LCA on activation effect is limited, which contributes to gas saving. According to the experiments conducted on a single cell and a 10-cell stack, only 40 min are needed with this combined procedure, which is much shorter than that of the traditional step-current activation. Furthermore, nearly 75% of hydrogen is saved due to the short activation time and the control of gas supply, thus significantly reducing the cost during activation. Furthermore, to reveal the underlying mechanisms, membrane electrode assembly parameters before and after activation are obtained by micro-current excitation. A decrease in ohmic resistance and an increase in roughness factor of catalyst are observed, which contribute to performance improvement. According to the characterizations in the microstructure of membrane electrode assembly and platinum catalyst valence state, the electrolyte hydration and oxide reduction are determined as key factors and principles during activation.

A Compact Bandpass Filter with Active Switchable Passband Status

In order to meet the increasing demand for adjustable devices in the modern wireless communication system, a compact bandpass filter with active switchable passband is proposed. The filter is based on the half mode substrate integrated waveguide (HMSIW), and uses its cut-off characteristics to form the lower stopband. The resonant characteristics of a quarter-wavelength shorted stub generates a transmission zero (TZ) at higher frequency, which forms the upper stopband. The active control of DC power supply determines the biased states of PIN diodes to change the electrical size of the filtering parts. When the diodes are reverse biased, the filter works in C band with the passband of 3.9-5.2 GHz; when the diodes are forward biased, the passband shifts to S band of 2.7-3.6 GHz. The 28.6% relative bandwidth in both frequency bands remains constant. The simple design realizes the active switching between bands, providing a promising idea for active adjustable devices.

A Comprehensive Review on the Power Supply System of Hydrogen Production Electrolyzers for Future Integrated Energy Systems

Hydrogen energy is regarded as an ideal solution for addressing climate change issues and an indispensable part of future integrated energy systems. The most environmentally friendly hydrogen production method remains water electrolysis, where the electrolyzer constructs the physical interface between electrical energy and hydrogen energy. However, few articles have reviewed the electrolyzer from the perspective of power supply topology and control. This review is the first to discuss the positioning of the electrolyzer power supply in the future integrated energy system. The electrolyzer is reviewed from the perspective of the electrolysis method, the market, and the electrical interface modelling, reflecting the requirement of the electrolyzer for power supply. Various electrolyzer power supply topologies are studied and reviewed. Although the most widely used topology in the current hydrogen production industry is still single-stage AC/DC, the interleaved parallel LLC topology constructed by wideband gap power semiconductors and controlled by the zero-voltage switching algorithm has broad application prospects because of its advantages of high power density, high efficiency, fault tolerance, and low current ripple. Taking into account the development trend of the EL power supply, a hierarchical control framework is proposed as it can manage the operation performance of the power supply itself, the electrolyzer, the hydrogen energy domain, and the entire integrated energy system.

Increasing the efficiency of the bactericide use at PS-4 of "Ozenmunaigas" JSC

Background: The study is devoted to increasing the efficiency of bactericidal treatment of sediments at the oil fields of Ozenmunaigas JSC. Calculations were carried out to assess the capability of heating the formation and the pipeline, hydraulic heat loss when injecting a bactericide, and the efficiency of mixing the reagent with water. The analysis revealed the ineffectiveness of mixing the bactericide with water at low temperatures and rates of inhibitor introduction.&#x0D; Aim: The purpose of the study was to identify solutions to overcome the problems caused by the increased content of hydrogen sulfide in the fields of Ozenmunaigas JSC. This included addressing the temperature issues during bactericide delivery and increasing the rate of inhibitor injection.&#x0D; Materials and methods: Heat loss calculations were carried out using the UniSim program for both tank heating and input lines, as well as an analysis of bactericide mixing inside the pipeline using the ANSYS program.&#x0D; Results: The results of the study led to specific recommendations and measures that could mitigate the problems associated with temperature and rate of injection. These included measures such as heating and insulation, temperature control, regular inspection of thermal insulation, and selection of a new reagent with improved mixing properties at lower temperatures. It is also recommended to install reagent flow and temperature sensors along with power supply control.&#x0D; Conclusion: The implementation of the proposed measures will effectively solve the problems associated with high levels of hydrogen sulfide. This approach will ensure a smooth and safe flow of bactericide and help maintain the operating efficiency of the affected facilities.

Carbon emission reduction capability assessment based on synergistic optimization control of electric vehicle V2G and multiple types power supply

With the increasing proliferation of electric vehicles (EVs) and the integration of renewable energy sources into the power system, significant challenges have arisen for power system load balancing and stability control. The carbon emission reduction capability of power systems through coordinated optimization control of electric vehicles and power sources has garnered considerable attention. This paper evaluates the impact of Vehicle-to-Grid (V2G) and power source coordinated optimization control on the carbon emission reduction capability of power systems, proposing a technique that takes into account the dynamic characteristics of electric vehicles, power sources, and carbon emissions. This approach integrates V2G technology, renewable energy generation, and load demand into a framework aimed at optimizing power system operations and minimizing carbon emissions. A case study using real load data from a city assesses the impact of EV V2G and power source coordinated optimization control on carbon reduction. The results indicate that by 2025, peak-valley regulation will reach 1211,000 MW, with a carbon reduction of 138,783.799 tons, corresponding to a total reduction ratio of 1.101%. This research can provide valuable insights for policymakers, power system operators, and researchers.

Optimization of the power supply and temperature control algorithm for a second-dimension temperature programming system used in comprehensive two-dimensional gas chromatography

This study evaluates the relationship between the power supply output (voltage (V), current (I), power (W)), used for heating a second dimension (²D) column, and the maximum heating rate and temperature offset achievable by custom built ²D temperature programming system (²DTPS). The influence of the gas chromatograph (GC) oven temperature, ²D column flow rate, and ²D column dimensions when heating the ²D column were also explored. This data provided the minimum power needed for heating a ²D column (normalized to its length), based on the heating rate or temperature offset relative to the first dimension (¹D) column. During the study, optimization of the temperature control algorithm was also carried out to expand the dynamic range of the heating rate for a single power supply output (V, I), while maintaining a temperature deviation of < 0.75 °C between the measured temperature and temperature setpoint. This simplified the power supply specification recommendation to voltages which provide 1.5 A for heating rates and maximum temperature offsets below 28 °C/s and 70 °C, respectively, and 1.9 A when higher heating rates or temperature offsets were needed.