Lip Contour Research Articles

A comprehension of contemporary effort for tracking of lip

Lip tracking exercise is the most important pre-requisite for lip reading system. Most of the lip reading procedures are accessible based on lip contour analysis. Similarly, lip contour extraction is a fundamental footstep. As a result of lip contour extraction, initially the process of lip contour detection in the first frame of an audio-visual image sequence. Subsequently capturing contour in successive frames based on methods of automatic, semiautomatic and hybrid is normally named as lip tracking. Here the effort presents an overview of contemporary works on extracting the face from digital video and classified the face into lip area and non-lip area by categorising the approaches into low and high-level processing techniques. Furthermore, the comparative study of approaches and their effectiveness based on various factors like asymmetric lips, the mouth with visible teeth, tongue and mouth with mustache are offered.

Improvement of the whole lip contour by additional filler injection to the lateral vermilion zone: a report of three cases

Improvement of the whole lip contour by additional filler injection to the lateral vermilion zone: a report of three cases

Impact of Hyperbaric Oxygen on the Healing of Teeth Extraction Sockets and Alveolar Ridge Preservation.

The purpose of this study was to investigate the role of hyperbaric oxygen (HBO) in the healing of teeth extraction sockets and in alveolar ridge preservation. This may provide an experimental basis for the widespread application of HBO in oral implantation. A total of 32 beagle dogs were included in the study and randomly divided equally between an HBO group treated with hyperbaric oxygen (100% O2, 2.4 atm, 90 min/day, 5 times/week, 6 weeks) and a normobaric oxygen (NBO) group treated with normal air in the same chamber. The lateral incisors of the maxillary and mandible of each dog were extracted, and the right upper and lower incisor extraction sockets (A2C2) were allowed to heal naturally, while left upper and lower incisor sockets (B2D2) received implants of a commercial bone substitute. At 4 and 8 weeks after surgery, clinical observation, cone-beam computerized tomography (CBCT), histomorphology observation, and expression levels of vascular endothelial growth factor (VEGF) and bone morphogenetic protein 2 (BMP-2) were analyzed to evaluate new bone formation, mineralization, and reconstruction. After 4 and 8 weeks, bone width and lip contour of the extraction socket in the NBO group were significantly reduced and collapsed in comparison with the HBO group. CBCT showed that the difference in vertical height between the alveolar crest of the labial tongue and palatal side of the extraction sockets was smaller in the HBO than NBO group. There was a significant difference in new bone formation (P < 0.05) and bone mineral density (P < 0.05) between the HBO and NBO groups, and the HBO group showed significantly greater new bone and bone reconstruction based on histology. Furthermore, the expression levels of VEGF and BMP-2 were higher in the HBO group. HBO reduced bone resorption and promoted early bone formation, bone mineralization, and reconstruction in the extraction sockets. HBO greatly reduced the healing time of the extraction sockets and promoted alveolar ridge preservation, thus showing promise for the clinic.

Upper Lip Fat Grafting Using the Anatomical Subunit and Fat Compartment Principles Improves Lip Cant and Symmetry in Patients With Unilateral Upper Lip Asymmetries.

Fat grafting is a widely adopted method for reconstructing upper lip asymmetries. However, most surgical techniques are difficult to reproduce, and none follow anatomical principles. The aim of this study was to assess the clinical outcomes of upper lip contour asymmetry and lip cant correction by anatomical upper lip fat grafting using the subunit and fat compartment principles. A prospective analysis was conducted of 113 consecutive patients who underwent anatomical upper lip fat grafting using the subunit and fat compartment principles for the management of lip cant and/or upper lip contour (volumetric) asymmetry. Quantitative photogrammetric upper lip symmetry and lip cant measurements were blindly performed preoperatively and at 3 and 12 months postoperatively. A panel assessment (by 8 blinded external plastic surgeons and 8 laypersons) was obtained to grade the qualitative upper lip symmetry. Bivariate and multivariate analyses were performed to identify independent variables associated with the 12-month postoperative lip cant change. There was significant (all P < 0.05) postoperative quantitative and qualitative upper lip symmetry and lip cant enhancement (preoperative < postoperative) after a single upper lip fat grafting procedure, and the outcomes were maintained (all P > 0.05) from 3 to 12 months postoperatively. Parry-Romberg syndrome was negatively associated (P < 0.05) with the 12-month postoperative lip cant change. Anatomical upper lip fat grafting, using the subunit and fat compartment principles, improves lip cant and symmetry in patients with unilateral upper lip asymmetries.

An automatic approach for classification and categorisation of lip morphological traits.

Classification of facial traits (e.g., lip shape) is an important area of medical research, for example, in determining associations between lip traits and genetic variants which may lead to a cleft lip. In clinical situations, classification of facial traits is usually performed subjectively directly on the individual or recorded later from a three-dimensional image, which is time consuming and prone to operator errors. The present study proposes, for the first time, an automatic approach for the classification and categorisation of lip area traits. Our approach uses novel three-dimensional geometric features based on surface curvatures measured along geodesic paths between anthropometric landmarks. Different combinations of geodesic features are analysed and compared. The effect of automatically identified categories on the face is visualised using a partial least squares method. The method was applied to the classification and categorisation of six lip shape traits (philtrum, Cupid’s bow, lip contours, lip-chin, and lower lip tone) in a large sample of 4747 faces of normal British Western European descents. The proposed method demonstrates correct automatic classification rate of up to 90%.

Objective evaluation of vertical Z-plasty with double transposition vermillion flaps for secondary whistling deformity correction: A method for uni- and bilateral correction

ObjectivesThis study describes a modified method for secondary correction of whistling deformities in patients with unilateral and bilateral cleft lip/palate (CL/P), using a horizontal double transposition vermilion flap, including parts of the orbicularis oris muscle. The pre- and postoperative results were objectively evaluated. Study design34 patients with a whistling deformity who underwent secondary reconstruction between 07/2013 and 11/2018 were included in this study (mean age 20.2 ± 11.6 years). 24 patients were male and 10 female. 30 patients presented with cleft lip and palate (CLP) — 15 bilateral, nine on the left side and six on the right. Four patients had only a left-side cleft lip (CL).The whistling deformity reconstruction was carried out using two triangular transposition vermilion flaps with muscle parts, for a vertical Z-plasty. The surgical procedure is normally performed under local anesthesia in all patients older than 10 years. For statistical evaluation, the size of the whistling defect in the vermilion was determined on photographs before and 6–9 months after surgery. The individual defect score (DS) was evaluated pre- and postoperatively. In all patients, no additional surgical procedures, such as rhinoplasty or scar correction in the upper lip, were carried out simultaneously. ResultsMinor (DS < 400), moderate (DS 400–1400), and severe (DS > 1400) whistling defects were surgically corrected. The whistling defect score was significantly reduced in all patient groups (p < 0.001). In six patients the result of surgery was rated as 'acceptable' (DS > 30), in five patients as 'good' (DS 10–30), and in 23 patients as 'very good' (DS 0–10). ConclusionsThis study describes a modified method for whistling deformity reconstruction in uni- and bilateral clefts. The aesthetic results are based on a reconstruction of the subcutaneous muscle layers and the creation of a symmetrical lip contour and prolabium using transposition flaps from the lateral side of the cleft. The great advantage is the uncomplicated performance under local anesthesia, even for all children over 10 years, and the short operation time. Postoperative complications did not occur.

TAD driven whole dentition distalization with special considerations for incisal/gingival display and occlusal canting

Many orthodontists face difficulties in aligning incisors in an esthetically critical position, because the individual perception of beauty fluctuates with time and trend. Temporary anchorage device (TAD) can aid in attaining this critical incisor position, which determines an attractive smile, the amount of incisor display, and lip contour. Borderline cases can be treated without extraction and the capricious minds of patients can be satisfied with regard to the incisor position through whole dentition distalization using TAD. Mild to moderate bimaxillary protrusion cases can be treated with TAD-driven en masse retraction without premolar extraction. Patients with Angle's Class III malocclusion can be the biggest beneficiaries because both sufficient maxillary incisal display, through intrusion of mandibular incisors, and distalization of the mandibular dentition are successfully achieved. In addition, TAD can be used to correct various other malocclusions, such as canting of the occlusal plane and dental/alveolus asymmetry.

Infantile Hemangiomas of the Lip: Complications and Need for Surgical Intervention.

Background:Infantile lip hemangiomas are challenging to manage due to the functional and aesthetic importance of the lips. Hemangiomas in this region may lead to significant complications including ulceration, feeding difficulties, and lip contour distortion requiring surgical intervention.Methods:A retrospective chart review of children with focal lip hemangiomas treated at our institution between January 2000 and December 2016 was conducted. Patient demographics, lesion characteristics, complications, treatments, and outcomes were collected. Lesions were classified based on depth (superficial, deep, or mixed depth), vermillion border involvement, and location.Results:One hundred and two patients with focal lip hemangiomas were identified; 45.1% were managed expectantly, 43.1% were treated medically, and 18.6% required surgery. Residual lip contour deformity following involution was the most common complication (26.5% of patients). Ulceration during the proliferation phase was reported in 14.7% of patients, leading to significant feeding difficulties in 9.8% of patients. All ulcerations occurred in lesions with a superficial component. None of the patients with superficial lesions underwent surgery; 27.1% of patients with deep or mixed depth hemangiomas required surgical treatment to restore lip contour.Conclusions:Lip hemangiomas have high rates of complications that seem to be related to lesion morphology and phase of growth. Ulceration occurs during the early proliferative phase and is most frequently associated with mixed depth hemangiomas. Residual lip contour deformities are identified in the involution phase; presence of a deep component is the primary factor in predicting the need for surgical intervention in these patients.

Treating the Lips and Its Anatomical Correlate in Respect to Vascular Compromise.

Treating the lips to increase facial attractiveness and youthfulness is challenging when trying to consider ethnic differences in an increasingly more diverse society. Multiple injection techniques are currently available for treating lip contour and volume, but a validation in the cadaveric model under the aspects of safety has not been performed yet. The injection techniques presented in this study are based on the experience and personal selection of the authors. The authors have assessed, treated, and evaluated for more than 20 years patients from the Middle East and Central Europe. Cadaveric verification was performed for each of the presented techniques to identify the positioning of the injected product inside the lips and its relation to the superior/inferior labial arteries. The results of the anatomic analyses revealed that in 58.3% of the performed injections, the product was placed close to the superior/inferior labial arteries. In 60.0% of the cases, applications using a needle placed the injected product in endangered locations, whereas 57.1% of the cases using cannulas placed the product in endangered locations (i.e., in the vicinity of the superior/inferior labial arteries). This anatomic study revealed that injected material into the lips is frequently placed in close proximity to labial arteries representing a high risk for intra-arterial applications, leading to tissue loss (necrosis) and potential end-arterial embolism (potential blindness). Nevertheless, treatment of the lips should be a multistep approach focusing first on the far (upper and middle face) and close (labiomandibular and labiomental) perioral regions.

Proposed Guide to Lip Treatment in Caucasian Women Using Objective and Measurable Parameters.

The lips are a focal point of the face; however, their aesthetic proportions and effect on perceived facial beauty remain poorly defined. Perioral aging is highly individual, with several distinct and often simultaneous processes contributing to changes in lip contour and surface. These processes can affect lip volume and length, shape, and the degree of vermilion inversion. We aimed to develop a treatment guide for Caucasian women that combined a complete analysis of the lips (including the effects of aging) with consideration of the rheological characteristics of the products used to assist practitioners in tailoring rejuvenation treatment to individual patients. We reviewed existing literature to analyze the parameters that make the lips of Caucasian women "attractive" and investigated the rheological characteristics of different hyaluronic fillers to provide guidance on the optimal treatment for each woman. Our numerical definition of the lips is based on 4 specific parameters: philtrum height, upper vermillion height, ratio between philtrum and upper vermillion height, and golden ratio between upper and lower vermillion height. In our opinion, conserving the length of hyaluronic acid chains results in dynamic fillers that may provide better results with lower risk of asymmetry compared with conventional products. This new classification and associated treatment guideline aims to allow accurate assessment and enable practitioners to customize treatment for individual patients.

PERBEDAAN JENIS SENYUM ANTARA LAKI-LAKI DAN PEREMPUAN BERDASARKAN BENTUK LENGKUNG SENYUM PADA SISWA SMK NEGERI 6 PADANG

Smile is one of the facial expression that are essential in expressing friendliness, agreement, and appreciation. Most patients that come to dentist to have treatment for an attractive smile. One of the component to make an attractive smile is smile arch. Smile arch have been the interest of the orthodontist in recent years. Smile arch is the relationship between a hypothetical curve drawn along the edges of the maxillary anterior teeth and the inner contour of the lower lip in smile. This study was to differ male and female’s smile type base on smile arch. This study was to evaluate of smile type based on smile arch with gender. A total of 31 females and 31 males were selected among criteria inclusion. Photographs taken with digital camera showing the subjects with a posed smile were used for this study and Adobe photoshop used to determine the smile arch. Student Mann Whitney test were used for statistical analysis. The resulting data showed that significantly difference (p&lt;0,05) between smile arch and gender. The most common female’s smile are parallel smile (64.5) and male’s smile are straight smile (51.6%). In this study concluded that the curvature of the incisal edge anterior maxilla appears to be more pronounced or parallel for woman than for a men.

How tight is the relationship between the skeletal and soft-tissue facial profile: A geometric morphometric analysis of the facial outline

Correlations between facial bony structures and soft facial features are fundamental for facial approximation methods The purpose of this study was to assess the strength of the association between craniofacial shape and the shape of the soft-tissue profile and to determine the extent to which it might be possible to predict the latter from the former. Soft-tissue and skeletal facial profile curves were extracted from 86 lateral head cephalograms of a recent Central European population (52 males and 34 females, aged between 19 and 43 years), divided into five parts, segmented automatically and evaluated using geometric morphometrics. The magnitude of the hard–soft shape association was assessed by principal component analysis and subsequent multiple linear regression (Halazonetis, 2007), by partial least square analysis (PLS) (Rohlf and Corti, 2000) and the RV coefficient (Klingenberg, 2009). The greatest amount of association between the skeletal contour and overlying soft tissues was exhibited by the region of the forehead (predictive power: 95.1%, RV=0.91, correlation for PLS1 r=0,96), followed by the region of the nasal root (predictive power: 40.2%, RV=0.42, rPLS1=0.72) and the lower lip and chin (predictive power: 37.3%, RV=0.41, rPLS1=0.65). The smallest statistically significant covariation was displayed by the upper lip and the maxilla (predictive power: 9.6%, RV=0.14, rPLS1=0.43). The shape covariation between the nasal bridge and the tip and lateral border of the nasal aperture was found to be statistically insignificant (predictive power: 5.8%, RV=0.05, rPLS1=0.26). Shape covariation was visualized and described by thin-plate spine grids. These findings correspond with the observation that the shape of the nasal profile and the upper lip contour are difficult to reconstruct or predict reliably in facial approximations. It seems that the shape of soft tissues might not follow underlying structures as closely as expected.

The Perception of Dental Esthetics Assessed by Prosthodontic Residents and UAE Recognized Specialists in Prosthodontics

Introduction: Smiles can be improved by veneering teeth using a relatively conservative technique. The appearance of veneers and smile design has not been previously investigated in the UAE. This study aimed to assess the aesthetic preferences of different smile designs rated by a group of prosthodontic residents and specialists. Methods: A questionnaire was devised asking about demographic details such as age and gender as well as clinical experience before and after graduation. Images of ten cases who had ceramic veneers fitted on their anterior teeth were included in the questionnaire. There were two images for each case: smiling with lips shown and close-up with retracted lips and cheeks. A total of seven questions regarding the appearance for each case were posed to each rater. Each question had a 5 point Likert rating scale from poor to excellent. All residents in prosthodontics at HBMCDM and UAE recognized specialists in prosthodontics were invited to participate. The specialists were recruited from the DHA/CPQ database. Result: A total of 25 dentists rated the 10 cases. There were 12 residents and 13 specialists, 40% were from the UAE and 60% from other countries. The residents were significantly younger than the specialists with mean ages of 29.4 years and 43.0 years respectively (p&lt;0.001). Ten raters were male and 15 female. An overall amalgamated mean score was calculated for each case by summing all 7 individual scores for the 7 questions by rater. Males rated case 8, visible papillae following lip contour, significantly more highly than females (p&lt;0.004). The overall ranking of the 10 cases was determined by gaining a mean % score for each case by summing the Likert scores for all seven questions and dividing by the maximum score of 35 per case. Both the residents and specialists agreed that case 9 (long teeth contacting the lower lip) was the most pleasant (68%) and that case 5 (midline discrepancy) was the most unattractive (39%). Overall, cases 9 and 6 were the most pleasing and cases 5 and 10 were the most displeasing. Conclusion: The residents and prosthodontic specialists were mostly in agreement when rating the esthetics of several different smile designs. Symmetry and the upper lip just covering the upper gingival margins were the most pleasing whilst a non-coincident midline and gingival inflammation were deemed the most unattractive.

Lip Segmentation Based on Combined Color Space and ACM with Rhombic Initial Contour

Lip segmentation is one of critical steps in a lip-reading system, because it closely relates to the accuracy of system recognition. In this paper, we aim to improve the accuracy of lip segmentation. A novel color space is proposed which consists of the [Formula: see text] component in the CIE-LUV space and the sum of [Formula: see text]2 and [Formula: see text]3 components of the image after discrete Hartley transform (DHT). We select a rhombus as the initial contour as its shape is approximate to a closed lip shape relatively. These notions are achieved based on the method of the Active contour model. The active contour model (ACM) is performed by the Chan–Vese model, and the result of each component is gained separately. Finally, the ultimate results are obtained by merging the result of each component together. Through experiments we can get a conclusion that this method can get more accurate and smoother lip contour. Meanwhile, the proposed method is more efficient compared with the classic ACM because it avoids some problems in the classic active contour model, like the radius of the initial contour needs to be set manually according to the size of images.

Lip Movement Feature Detection and Classification Methods

Computerized lip reading has been one of the most actively researched areas of computer vision in recent past because of its crime fighting potential and invariance to acoustic environment. However, several factors like fast speech, bad pronunciation, and poor illumination, movement of face, moustaches and beards make lip reading difficult. In present work, we propose a solution for automatic lip contour tracking and recognizing numbers 1-10 of English language spoken by speakers using the information available from lip movements. In this method first, we are detecting Face then in that ROI Lip detection. Lip movements as the only input and without using any speech recognition system in parallel. The approach used in this work is found to significantly solve the purpose of lip reading when size of database is small. In this paper also compare LBP and HOG feature with Support Vector Machine Classification. The system is use for the modern sign in PASSWORD systems.

Upper lip tie wrapping into the hard palate and anterior premaxilla causing alveolar hypoplasia

Bony anomaly caused by lip tie is not many reported yet. There was a case of upper lip tie wrapping into the anterior premaxilla. We represent a case of severe upper lip tie of limited lip motion, upper lips curling inside, and alveolar hypoplasia. Male patient was born on June 3, 2016. He had a deep philtral sulcus, low vermilion border and deep cupid’s bow of upper lip due to tension of short, stout and very tight frenulum. His upper lip motion was severely restricted in particular lip eversion. There was anterior alveolar hypoplasia with deep sulcus in anterior maxilla. Resection of frenulum cord with Z-plasty was performed at anterior premaxilla and upper lip sulcus. Frenulum was tightly attached to gingiva through gum and into hard palate. Width of frenulum cord was about 1 cm, and length was about 3 cm. He gained upper lip contour including cupid’s bow and normal vermilion border after the surgery. This case is severe upper lip tie showing the premaxillary hypoplasia, abnormal lip motion and contour for child. Although there is mild limitation of feeding with upper lip tie child, early detection and treatment are needed to correct bony growth.

The Influential Bony Factors and Vectors for Predicting Soft Tissue Responses After Orthognathic Surgery in Mandibular Prognathism

We sought to identify the hard tissue points and vectors that have the greatest effect on soft tissue movement after orthognathic surgery in patients with mandibular prognathism. The present retrospective study involved patients who had undergone mandibular setback surgery with or without maxillary advancement. Multiple linear regression models were adapted to evaluate the association between the 8 hard tissue landmark (predictor variables) changes and 11 soft tissue responses (outcome variables) using the x and y coordinates assessed from superimposed pre- and postoperative 3-dimensional computed tomography images. A total of 50 patients (42 patients had undergone 2-jaw surgery; 8 patients had undergone 1-jaw surgery; mean age 23±4years) were included in the present study. Our statistical models demonstrated that the horizontal hard tissue changes had a greater influence on the soft tissue responses than did the vertical changes, and these changes were more notable in the lower facial area (lower lip contour and chin profile) than the midfacial area (nasal profile, upper lip contour, upper lip length, and nasolabial angle). In the horizontal soft tissue response model, the soft tissue A point/A point ratio was 0.86:1 (95% confidence interval [CI] 0.674-1.049); the soft tissue B point/B point ratio was almost 1:1 (95% CI 0.919-1.071); and the soft tissue pogonion/pogonion ratio was 0.88:1 (95% CI 0.805-0.963). Horizontal or vertical bone tissue changes affected both the horizontal and vertical soft tissue changes in most areas. Our study demonstrated that the soft tissue response is not linear but a more complicated and dynamic reaction.

Audio-Visual Speech Recognition based on Machine Learning approach

Audio-visual speech recognition by machine plays an important role when research in automatic speech recognition reaches its highest performance. Audio alone also gives good performance, but adding the visual information potentially gives more convenient recognition system when an audio signal degrades in a noisy environment and may vary because of the environmental channel. This paper proposes an audio-visual automatic speech recognition (AV-ASR) system based on machine learning approaches. Visual information is captured from lip contour. Pseudo Zernike moments (PZMs) and 19th order Mel frequency cepstral coefficients (MFCCs) are extracted to obtain visual information and audio feature respectively. Machine learning approach, artificial neural networks (ANN) and support vector machines (SVM) are used to recognise speech for audio and visual modality. After the individual recognition of two systems, a combined decision is taken. This paper also evaluates the individual performance of both audio and visual speech recognition by machine learning approach.

Inner lips feature extraction based on CLNF with hybrid dynamic template for Cued Speech

In previous French Cued Speech (CS) studies, one of the widely used methods is painting blue color on the speaker’s lips to make lips feature extraction easier. In this paper, in order to get rid of this artifice, a novel automatic method to extract the inner lips contour of CS speakers is presented. This method is based on a recent facial contour extraction model developed in computer vision, called Constrained Local Neural Field (CLNF), which provides eight characteristic landmarks describing the inner lips contour. However, directly applied to our CS data, CLNF fails in about 41.4% of cases. Therefore, we propose two methods to correct the B parameter (aperture of inner lips) and A parameter (width of inner lips), respectively. For correcting the B parameter, a hybrid dynamic correlation template method (HD-CTM) using the first derivative of smoothed luminance variation is proposed. HD-CTM is first applied to detect the outer lower lips position. Then, the inner lower lips position is obtained by subtracting the validated lower lips thickness (VLLT). For correcting the A parameter, a periodical spline interpolation with a geometrical deformation of six CLNF inner lips landmarks is explored. Combined with an automatic round lips detector, this method is efficient to correct A parameter for round lips (the third vowel viseme made of French vowels with a small opening). HD-CTM is evaluated on 4800 images of three French speakers. It corrects about 95% CLNF errors of the B parameter, and total RMSE of one pixel (i.e., 0.05 cm on average) is achieved. The periodical spline interpolation method is tested on 927 round lips images. The total error of CLNF is reduced significantly, which is comparable to the state of the art. Moreover, the third viseme is properly distributed in the parameter A and B plane after using this method.

Mold design for the assembly injection molding of a solid housing with integrated dynamic seal

Currently, it is not state‐of‐the‐art to mold a hard housing with integrated dynamic seal, without any postprocessing. Usually, separately processed rubber seals need to be mounted into the housing in an additional assembly step, which is time‐consuming and costly. The article deals with the mold design for the efficient manufacturing of a hard housing with an integrated dynamic soft seal, as well as the influence of processing parameters in assembly injection molding on the bonding strength, soft component properties, and sealing lip contour. Selected gating types were used to manufacture demonstrator parts and perform bond strength tests and morphological analyses. Additionally, the mechanical properties of the seal component as a function of the processing temperature were investigated. Furthermore, the contour of the injection molded seal lip was analyzed. The developed design concept allows an automatized manufacturing process of such a hybrid structure consisting of a hard and soft component. The feasibility study on the manufacturability of a demonstrator part proves a good adhesive bonding between the hard and soft component as well as a precise shape of the seal contour. A contrary dependency between bond strength and mechanical material properties of the soft component was detected. POLYM. ENG. SCI., 58:545–551, 2018. © 2017 Society of Plastics Engineers