Continuous Wave Research Articles

Performance and compensation method of first-order liquid crystal beam-steering system under continuous wave laser irradiation

The effects of laser irradiation thermal deposition on the performance degradation of liquid crystal (LC) devices in high-power laser systems are extremely vital. In this study, the first-order beam-steering system (FBS) was developed using a passive liquid crystal polarization grating (LCPG) and liquid crystal adjustable wave-plate (LCAW). The LCPG was prepared by holographic exposure technology, and the LCAW was prepared using the standard LC cell preparation process. We investigated the influences of diffraction efficiency of FBS under a 1070-nm continuous-wave (CW) laser irradiation. The energy is concentrated in the −1st order at first. When the half-wave retardation was reached, all the energy is concentrated in the +1st order (∼97 %), and the beam is deflected. Once the phase retardation decreases below the half-wave retardation, the energy gradually reconcentrates in the −1st order. When the LCAW fails, the diffraction the energy is refocused to the −1st order by the LCPG. The results indicated that both thermal deposition and driving voltage reduce the phase retardation of the LCAW, generating a variation of energy between in ±1st orders. By reducing the driving voltage, this half-wave retardation can be recovered under a certain half-wave voltage and laser power density, and the diffraction efficiency of the +1st order can be compensated to ∼97 %. If the reduced phase retardation is not less than half-wave, the FBS can still be modulated in high-power continuous lasers. Our research provides a reference for the development of beam-steering technology based on LC materials in high-power laser systems.

New energy levels of atomic holmium discovered by laser spectroscopy in the near infrared spectral range

A combination of optogalvanic spectroscopy and laser-induced fluorescence spectroscopy with a continuous wave tunable single mode Ti-Sa laser was applied to find new energy levels of atomic holmium. Free and excited holmium atoms were produced in a liquid nitrogen-cooled hollow-cathode lamp. In this study, we examined 35 spectral lines of Ho I in the near-infrared wavelength range from 698 nm to 833 nm. Altogether, 16 new energy levels have been discovered, 5 levels of even parity and 11 levels of odd parity. Another four energy levels have been discovered but have already been published by another research group. Data on the hyperfine structure for the new levels are presented. Additionally, hyperfine structure data of three known levels of even parity were determined for the first time. The existence of the new energy levels was confirmed by analyzing 60 lines of previously measured Fourier transform spectra to precisely determine the energy of the levels.

Continuous Wave Ultrasound Testing Techniques

Currently, the primary method employed for ultrasound inspection is based on sending and detecting ultrasound pulses. Typically, pulse-based methods are essentially time-domain back-reflection methods, and the time-of-flight is the main measured parameter. Recently, continuous-wave methods have been developed in the radar and the fiber-optics fields, which demonstrate significantly better spatial resolution, higher signal-to-noise ratio, and ability to detect reflecting objects at very short distances. It is proposed to use the same approach to develop continuous-wave ultrasound inspection systems. The two main differences between the proposed continuous-wave ultrasonic testing and the classical pulsed ultrasound inspection method are: (i) in the continuous-wave ultrasonic testing method, the transmitted and received signals overlap in the time domain, while in the pulsed ultrasound inspection method the transmitted and received signals are separated in the time; and (ii) in the pulsed ultrasound inspection method the most important parameter is the time delay between the transmitted and received signals, while in the continuous-wave ultrasonic testing method the most informative parameters are the frequency and phase changes in the received signal in respect to modulated transmitted signal. This allows for additional flexibility in the continuous-wave ultrasonic measurements, through control of the frequency modulation. Also, the continuous-wave ultrasonic method potentially offers improved detection range and resolution; improved signal-to-noise ratio due to better energy efficiency and easier filtering; and reduced requirements on the voltage applied to the transducer, which in turn allows the use of simplified low-cost electronics. The theoretical basis of several continuous-wave ultrasound inspection technique is explained, and their advantages and limitations are discussed. Implementation of several prototype continuous-wave ultrasound testing systems is presented. Examples of the use of the systems for non-destructive testing are described.

Simulated dynamical transitions in a heterogeneous marmoset pFC cluster

Network analysis of the marmoset cortical connectivity data indicates a significant 3D cluster in and around the pre-frontal cortex. A multi-node, heterogeneous neural mass model of this six-node cluster was constructed. Its parameters were informed by available experimental and simulation data so that each neural mass oscillated in a characteristic frequency band. Nodes were connected with directed, weighted links derived from the marmoset structural connectivity data. Heterogeneity arose from the different link weights and model parameters for each node. Stimulation of the cluster with an incident pulse train modulated in the standard frequency bands induced a variety of dynamical state transitions that lasted in the range of 5–10 s, suggestive of timescales relevant to short-term memory. A short gamma burst rapidly reset the beta-induced transition. The theta-induced transition state showed a spontaneous, delayed reset to the resting state. An additional, continuous gamma wave stimulus induced a new beating oscillatory state. Longer or repeated gamma bursts were phase-aligned with the beta oscillation, delivering increasing energy input and causing shorter transition times. The relevance of these results to working memory is yet to be established, but they suggest interesting opportunities.

Automated Detection of Volcanic Seismicity Using Network Covariance and Image Processing

Abstract Seismicity at restless volcanoes commonly features a variety of signal types reflecting both volcanotectonic and fluid-driven source processes. However, traditional catalogs of seismicity are often incomplete, especially concerning events with emergent onsets such as those driven by the dynamics of magmatic and hydrothermal fluids. The detection of all discrete events and continuous seismic tremors, regardless of the underlying source processes, would therefore improve the ability of monitoring agencies to forecast eruptions and mitigate their associated hazards. We present a workflow for generalized detection of seismic events based on the network covariance matrix (Seydoux et al., 2016). Our contributions enable the method to simultaneously detect continuous and short-duration (<∼10 s) events, provide information about the frequency content of the signals, and to refine the initial detection times by an order of magnitude (from window lengths of 75 to 7.5 s). We test the workflow on a 15-month record of seismicity with 23 stations at Mammoth Mountain, California (July 2012–October 2013) and detect 62% of long-period events and 94% of volcanotectonic events in the existing Northern California Earthquake Data Center catalog. In addition, ∼3000 events are not included in the catalog, and thousands of tremor signals are found. The method is suitable for near-real-time analysis of continuous waveforms and can provide a valuable supplement to existing algorithms to improve the completeness of catalogs used for monitoring volcanoes.

Population-based study of rare epilepsy incidence in a US urban population.

This study was undertaken to estimate incidence of rare epilepsies and compare with literature. We used electronic health record text search to identify children with 28 rare epilepsies in New York City (2010-2014). We estimated cumulative incidence and compared with literature. Eight of 28 rare epilepsies had five or more prior estimates, and our measurements were within the published range for all. The most common were infantile epileptic spasms syndrome (1 in 2920 live births), Lennox-Gastaut syndrome (1 in 9690), and seizures associated with tuberous sclerosis complex (1 in 14 300). Fifteen of 28 had fewer than five prior estimates, and of these, we provided additional estimates for early infantile developmental and epileptic encephalopathy (1 in 32 700), epilepsy with myoclonic-atonic seizures (1 in 34 100), Sturge-Weber syndrome plus seizures/epilepsy (1 in 40 900), epilepsy in infancy with migrating focal seizures (1 in 54 500), Aicardi syndrome plus seizures/epilepsy (1 in 71 600), hypothalamic hamartoma with seizures (1 in 225 000), and Rasmussen syndrome (1 in 450 000). Five of 28 rare epilepsies had no prior estimates, and of these, we provided a new estimate for developmental/epileptic encephalopathy with spike-and-wave activation in sleep and/or continuous spikes and waves during sleep (1 in 34 100). Data were limited for the remaining 12 rare epilepsies, which were all genetic epilepsies, including PCDH19, CDKL5, Alpers disease, SCN8A, KCNQ2, SCN2A, GLUT1 deficiency, Phelan-McDermid syndrome, myoclonic epilepsy with ragged-red fibers, dup15q syndrome, ring chromosome 14, and ring chromosome 20. We estimated the incidence of rare epilepsies using population-based electronic health record data and literature review. More research is needed to better estimate the incidence of genetic epilepsies with nonspecific clinical features. Electronic health records may be a valuable data source for studying rare epilepsies and other rare diseases, particularly as genetic testing becomes more widely adopted.

P.036 Vagal nerve stimulation in three cases of continuous spike and wave in slow-wave sleep

Background: Continuous spike and waves during slow-wave sleep (CSWS) is a childhood-onset epileptic encephalopathy that is characterized by clinical seizures, electrical status epilepticus during sleep (ESES), and neurocognitive regression. Early intervention can preserve neurocognitive development, and vagus nerve stimulator (VNS) therapy had positive outcomes in the few previously reported case reports. We present three patients with intractable CSWS unresponsive to medications, who had a positive response to VNS therapy. Methods: Review of clinical records of three pediatric patients diagnosed with CSWS were compared for selected clinical outcomes and electrographic data both prior to and in the years following the initiation of VNS therapy. Results: Three patients now aged 13, 16 and 20 years, were treated with VNS following intolerance and a lack of response to multiple medications (5-9) for CSWS. The ketogenic diet was not an option. The CSWS resolved in all three patients, resulting in improved cognitive function. Patient 3 had resurgence of CSWS on EEG when the VNS settings inadvertently reset to the factory settings and improved with adjustment in the cycling. Conclusions: In patients who are unresponsive to medication, VNS provides an alternative option for resolving CSWS to preserve and, in some cases, potentially restore neurocognitive function.

Compressive sensing–based optical two-frequency continuous wave time-of-flight ranging system

A time-of-flight–based ranging system constructed using an intensity-modulated light source and photodetectors (PDs) is proposed. In the proposed system, the carrier wave, which comprises two cosine waves with different frequencies in the megahertz range, is reconstructed from a few samples obtained using PDs with kilohertz sampling rates using the compressive sensing technique. This allows the system to measure distances with very high accuracy and extends the measurement range while maintaining the accuracy of an existing system that uses a single-frequency carrier.

Comparative Numerical Analysis of Keyhole Shape and Penetration Depth in Laser Spot Welding of Aluminum with Power Wave Modulation

Keyhole mode laser welding is a valuable technique for welding thick materials in industrial applications. However, its susceptibility to fluctuations and instabilities poses challenges, leading to defects that compromise weld quality. Observing the keyhole during laser welding is challenging due to bright process radiation, and existing observation methods are complex and expensive. This paper alternatively presents a novel numerical modeling approach for laser spot welding of aluminum through a modified mixture theory, a modified level-set (LS) method, and a thermal enthalpy porosity technique. The effects of laser parameters on keyhole penetration depth are investigated, with a focus on laser power, spot radius, frequency, and pulse wave modulation in pulsed wave (PW) versus continuous wave (CW) laser welding. PW laser welding involves the careful modulation of power waves, specifically adjusting the pulse width, pulse number, and pulse shapes. Results indicate a greater than 80 percent increase in the keyhole penetration depth with higher laser power, pulse width, and pulse number, as well as decreased spot radius. Keyhole instabilities are also more pronounced with higher pulse width/numbers and frequencies. Notably, the rectangular pulse shape demonstrates substantially deeper penetration compared to CW welding and other pulse shapes. This study enhances understanding of weld pool dynamics and provides insights into optimizing laser welding parameters to mitigate defects and improve weld quality.

High beam quality continuous-wave 320 nm UV laser from a walk-off compensated intracavity frequency-doubled Pr:YLF laser

We report a high beam quality continuous-wave (CW) 320 nm ultra-violet (UV) laser. An end-pumped praseodymium-doped yttrium lithium fluoride (Pr:YLF) laser is constructed in a typical V-shaped cavity structure, while the UV output is obtained through intracavity frequency doubling using LiB3O5 (LBO). We investigate the dependence of the UV output power, as well as the spot profile on the LBO length, and find that the “walk-off” within LBO severely affects both the frequency-doubling efficiency and the beam quality of the UV output. Rotated twin LBO crystals are then applied to substitute for single long LBO crystal to compensate the walk-off effect, resulting in high-power 320 nm output up to 410 mW under the absorbed pump power of 4.0 W at 444 nm, with a high beam quality of M x 2=1.02 and M y 2=1.04.

Inkjet Printing of Yb:YAG Transparent Ceramic Planar Waveguide Laser Gain Medium

Herein, a YAG/10 at% Yb:YAG/YAG transparent ceramic planar waveguide (PWG) gain medium has been molded via inkjet printing and dry pressing molding. The composition and rheological property of ink are optimized along with the printing process to enhance the printing accuracy and quality. The PWG has dimensions of 13.5 × 8.0 × 1.8 mm3, while the thickness of the core Yb:YAG layer is ≈190 μm. The in‐line transmittance of the PWG reaches 81.7% at 1030 nm, and the average grain size is ≈2.3 μm. The diffusion characteristics of Yb ions across the interface between the cladding YAG layer and the core Yb:YAG layer are investigated by calculating the diffusion coefficient and the mean diffusion distance of 172Yb ions. The Yb:YAG PWG oscillator, which is pumped from a single end by a 940 nm laser diode, produces continuous wave laser at a wavelength of 1030 nm and exhibits the highest power (3.8 W) and highest absorbed–output slope efficiency (64.6%).

Continuous wave laser-assisted evaporation of halide perovskite thin films from a single stoichiometric source

<i>Continuous wave</i> laser-assisted evaporation of halide perovskite thin films from a single stoichiometric source

Infrared Photodissociation Spectroscopy of Water-Tagged Ions with a Widely Tunable Quantum Cascade Laser for Planetary Science Applications.

This work presents a benchtop method for collecting the room temperature gas phase infrared (IR) action spectra of protonated amino acids and their isomers. The adopted setup uses a minimally modified commercial electrospray ionization linear ion trap mass spectrometer (ESI-LIT-MS) coupled to a broadband continuous wave (cw) quantum cascade laser (QCL) source. This approach leverages messenger assisted action spectroscopic techniques using water-tagged molecular ions with complex formation, irradiation, and subsequent analysis, all taking place within a single linear ion trap stage. This configuration thus circumvents the use of multiple mass selection and analysis stages, cryogenic buffer cells, and complex high-power laser systems typically called upon to execute these techniques. The benchtop action spectrometer is used to collect the 935-1600 cm-1 (6.2-10.7 μm) IR action spectrum of a collection of amino acids and a dipeptide with results cross referenced against literature examples obtained with a free electron laser source. Recorded IR spectra are used for the analysis of binary mixture samples composed of constitutional isomers α-alanine and β-alanine with ratios determined to ∼4% measurement uncertainty without the aid of a front-end separation stage. This turn-key QCL-based approach is a major step in showing the viability of tag-based action spectroscopic techniques for use in future in situ planetary science sensors and general analytical applications.

III-nitride m-plane violet narrow ridge edge-emitting laser diodes with sidewall passivation using atomic layer deposition

A novel deep-ridge laser structure with atomic-layer deposition (ALD) sidewall passivation was proposed that enhances the optical characteristics of 8-µm ridge width III-nitride violet lasers on freestanding m-plane GaN substrates. The internal loss was determined using the variable stripe length method, where the laser structure with ALD sidewall passivation showed lower internal loss compared to the conventional shallow-ridge laser design. ALD sidewall passivation plays a critical role in device improvements; compared to the lasers without ALD sidewall passivation, the lasers with ALD sidewall passivation yield improved optoelectrical performance and longer lifetime under continuous-wave operation at high current density. This work demonstrates the importance of ALD sidewall passivation to laser performance, which enables high energy efficiency.

Broadband High-Linear FMCW Light Source Based on Spectral Stitching

The key to realizing a high-performance frequency-modulated continuous wave (FMCW) laser frequency-sweeping light source is how to extend the frequency-swept bandwidth and eliminate the effect of nonlinearity. To solve these issues, this paper designs a broadband high-linear FMCW frequency-sweeping light source system based on the combination of fixed temperature control and digital optoelectronic phase-locked loop (PLL), which controls the temperatures of the two lasers separately and attempts to achieve the coarse spectral stitching based on a time-division multiplexing scheme. Furthermore, we uses the PLL to correct the frequency error more specifically after the coarse stitching, which achieves the spectrum fine stitching and, meanwhile, realizes the nonlinearity correction. The experimental results show that our scheme can successfully achieve bandwidth expansion and nonlinearity correction, and the sweeping bandwidth is twice as much as that of the original single laser. The full-width half-maximum (FWHM) of the FMCW output is reduced from 150 kHz to 6.1 kHz, which exhibits excellent nonlinear correction performance. The relative error of the FMCW ranging system based on this frequency-swept light source is also reduced from 1.628% to 0.673%. Therefore, our frequency-swept light source with excellent performance has a promising application in the FMCW laser ranging system.

Edge-Terminated AlGaN/GaN/AlGaN Multi-Quantum Well Impact Avalanche Transit Time Sources for Terahertz Wave Generation

In our pursuit of high-power terahertz (THz) wave generation, we propose innovative edge-terminated single-drift region (SDR) multi-quantum well (MQW) impact avalanche transit time (IMPATT) structures based on the AlxGa1−xN/GaN/AlxGa1−xN material system, with a fixed aluminum mole fraction of x = 0.3. Two distinct MQW diode configurations, namely p+-n junction-based and Schottky barrier diode structures, were investigated for their THz potential. To enhance reverse breakdown characteristics, we propose employing mesa etching and nitrogen ion implantation for edge termination, mitigating issues related to premature and soft breakdown. The THz performance is comprehensively evaluated through steady-state and high-frequency characterizations using a self-consistent quantum drift-diffusion (SCQDD) model. Our proposed Al0.3Ga0.7N/GaN/Al0.3Ga0.7N MQW diodes, as well as GaN-based single-drift region (SDR) and 3C-SiC/Si/3C-SiC MQW-based double-drift region (DDR) IMPATT diodes, are simulated. The Schottky barrier in the proposed diodes significantly reduces device series resistance, enhancing peak continuous wave power output to approximately 300 mW and DC to THz conversion efficiency to nearly 13% at 1.0 THz. Noise performance analysis reveals that MQW structures within the avalanche zone mitigate noise and improve overall performance. Benchmarking against state-of-the-art THz sources establishes the superiority of our proposed THz sources, highlighting their potential for advancing THz technology and its applications.

Demonstration of a 0.8 W continuous wave bulk laser around 2 𝜇m in a Tm³+ :Ga-rich BGG glass

Demonstration of a 0.8 W continuous wave bulk laser around 2 𝜇m in a Tm³+ :Ga-rich BGG glass

First thin-disk oscillator with ceramic Yb:LuScO3 in comparison to the operation with ceramic Yb:Lu2O3

We report on the characterization and first laser operation of ceramic Yb:LuScO3 in a thin-disk oscillator. The optical performance achieved with a ceramic Yb:LuScO3 disk is compared to the one obtained with an existing ceramic Yb:Lu2O3 disk for reference. The characterization covers the measurement of the fluorescence spectra, the fluorescence lifetimes, and nomarsky imaging. The investigation on the laser operation covers the measurement of resonator losses, output powers, and thermal behavior during continuous-wave operation in a multimode thin-disk oscillator. An average output power of 149 W and a slope efficiency of 51.8% were achieved with the ceramic Yb:LuScO3 disk which reached a maximum surface temperature of about 150 °C. At the same temperature level, a disk made of the already established ceramic Yb:Lu2O3 delivered 957 W of output power with a slope efficiency of 75.7%.

Non-Contact Blood Pressure Estimation from Radar Signals by a Stacked Deformable Convolution Network.

This study introduces a contactless blood pressure monitoring approach that combines conventional radar signal processing with novel deep learning architectures. During the preprocessing phase, datasets suitable for synchronization are created by integrating Kalman filtering, multiscale bandpass filters, and a periodic extraction method in the time domain. These data comprise data on chest micro variations, encapsulating a complex array of physiological and biomedical information reflective of cardiac micromotions. The Radar-based Stacked Deformable convolution Network (RSD-Net) integrates channel and spatial self attention mechanisms within a deformable convolutional framework to enhance feature extraction from radar signals. The network architecture systematically employs deformable convolutions for initial deep feature extraction from individual signals. Subsequently, continuous blood pressure estimation is conducted using self attention mechanisms on feature map from single source coupled with multi-feature map channel attention. The performance of model is corroborated via the open-source dataset procured using a non-invasive 24GHz six-port continuous wave radar system. The dataset, encompassing readings from 30 healthy individuals subjected to diverse conditions including rest, the Valsalva maneuver, apnea, and tilt-table examinations. It serves to substantiate the validity and resilience of the proposed method in the non-contact assessment of continuous blood pressure. Evaluation metrics reveal Pearson correlation coefficients of 0.838 for systolic and 0.797 for diastolic blood pressure predictions. The Mean Error (ME) and Standard Deviation (SD) for systolic and diastolic blood pressure measurements are -0.32 ±6.14mmHg and -0.20 ±5.50mmHg, respectively. The ablation study assesses the contribution of different structural components of the RSD-Net, validating their significance in the overall of model performance.

Analysis of early intermediate states of the nitrogenase reaction by regularization of EPR spectra

Due to the complexity of the catalytic FeMo cofactor site in nitrogenases that mediates the reduction of molecular nitrogen to ammonium, mechanistic details of this reaction remain under debate. In this study, selenium- and sulfur-incorporated FeMo cofactors of the catalytic MoFe protein component from Azotobacter vinelandii are prepared under turnover conditions and investigated by using different EPR methods. Complex signal patterns are observed in the continuous wave EPR spectra of selenium-incorporated samples, which are analyzed by Tikhonov regularization, a method that has not yet been applied to high spin systems of transition metal cofactors, and by an already established grid-of-error approach. Both methods yield similar probability distributions that reveal the presence of at least four other species with different electronic structures in addition to the ground state E0. Two of these species were preliminary assigned to hydrogenated E2 states. In addition, advanced pulsed-EPR experiments are utilized to verify the incorporation of sulfur and selenium into the FeMo cofactor, and to assign hyperfine couplings of 33S and 77Se that directly couple to the FeMo cluster. With this analysis, we report selenium incorporation under turnover conditions as a straightforward approach to stabilize and analyze early intermediate states of the FeMo cofactor.