Continuous Wave Electron Paramagnetic Resonance Research Articles

Electrically Induced Crystal Field Distortion in a Ferroelectric Perovskite Revealed by Electron Paramagnetic Resonance.

The magnetoelectric material has attracted multidisciplinary interest in the past decade for its potential to accommodate various functions. Especially, the external electric field can drive the quantum behaviors of such materials via the spin-electric coupling effect, with the advantages of high spatial resolution and low energy cost. In this work, the spin-electric coupling effect of Mn2+-doped ferroelectric organic-inorganic hybrid perovskite [(CH3)3NCH2Cl]CdCl3 with a large piezoelectric effect was investigated. The electric field manipulation efficiency for the allowed transitions was determined by the pulsed electron paramagnetic resonance. The orientation-included Hamiltonian of the spin-electric coupling effect was obtained via simulating the angle-dependent electric field modulated continuous-wave electron paramagnetic resonance. The results demonstrate that the applied electric field affects not only the principal values of the zero-field splitting tensor but also its principal axis directions. This work proposes and exemplifies a route to understand the spin-electric coupling effect originating from the crystal field imposed on a spin ion being modified by the applied electric field, which may guide the rational screening and designing of hybrid perovskite ferroelectrics that satisfy the efficiency requirement of electric field manipulation of spins in quantum information applications.

1-Ethyl-3-methylimidazolium Acetate as a Reactive Solvent for Elemental Sulfur and Poly(sulfur nitride).

We investigate the reactive dissolution process of poly(sulfur nitride) (SN)x in the ionic liquid (IL) 1-ethyl-3-methylimidazolium acetate [EMIm][OAc] in comparison to the process of elemental sulfur in the same IL. It has been known from the literature that during the reaction of S8 with [EMIm][OAc], the respective thione is formed via a radical mechanism. Here, we present new results on the kinetics of the formation of the respective imidazole thione (EMImS) via the hexasulfur dianion [S6]2- and the trisulfur radical anion [S3]•-. We can show that [S6]2- is formed first, which dissociates then to [S3]•-. Also, long-term stable radicals occur, which are necessary side products provided in a reaction scheme. During the reaction of [EMIm][OAc] with (SN)x chains, two further products can be identified, one of which is the corresponding imine. The reactions are followed by time-resolved NMR spectroscopic methods that showed the corresponding product distributions and allowed the assignment of the individual signals. In addition, continuous-wave (CW) EPR and UV/vis spectroscopic measurements show the course of the reactions. Another significant difference in both reactions is the formation of a long-term stable radical in the sulfur-IL system, which remains active over 35 days, while for the (SN)x-IL system, we can determine a radical species only with the spin trap 5,5-dimethyl-1-pyrrolin-N-oxide, which indicates the existence of short-living radicals. Since the molecular dynamics are restricted based on the EPR spectra, these radicals must be large.

Cryogenic platform to investigate strong microwave cavity-spin coupling in correlated magnetic materials

We present a comprehensive exploration of loop-gap resonators for electron spin resonance (ESR) studies, enabling investigations into the hybridization of solid-state magnetic materials with microwave polariton modes. The experimental setup, implemented in a Physical Property Measurement System by Quantum Design, allows for measurements of ESR spectra at temperatures as low as 2 Kelvin. The versatility of continuous wave ESR spectroscopy is demonstrated through experiments on CuSO 4⋅5 H2O and MgCr2O4, showcasing the g-tensor and magnetic susceptibilities of these materials. The study delves into the challenges of fitting spectra under strong hybridization conditions and underscores the significance of proper calibration and stabilization. The detailed guide provided serves as a valuable resource for laboratories interested in exploring hybrid quantum systems through microwave resonators.

Dielectric microwave resonator with large optical apertures for spin-based quantum devices

We demonstrate a low-loss dielectric microwave resonator with an internal quality factor of 2.30×104 while accommodating optical apertures with a diameter of 8 mm. The two seemingly conflicting requirements, high quality factor and large optical apertures, are satisfied, thanks to the large dielectric constant of rutile (TiO2). The quality factor is limited by radiation loss, and we confirmed by numerical simulation that this radiation loss can be suppressed by extending the enclosure height of the resonator; the resonator can potentially achieve a dielectric loss-limited quality factor, exceeding 106. Using this resonator, we performed both continuous-wave (cw) and pulse electron spin resonance (ESR) spectroscopy on 2,2-diphenyl-1-picrylhydrazyl (DPPH) crystalline powder and P1 centers in a diamond crystal in a dilution refrigerator. The cw ESR spectroscopy demonstrated high-cooperativity and strong spin-resonator coupling with the DPPH and P1 centers, respectively, while the pulse ESR spectroscopy successfully measured longitudinal and transverse relaxation times. This optically accessible low-loss microwave resonator enables the implementation of a spin-based quantum device, such as a microwave-optical photon transducer.

A Stable Aluminum Tris(dithiolene) Triradical.

A stable aluminum tris(dithiolene) triradical (3) was experimentally realized through a low-temperature reaction of the sterically demanding lithium dithiolene radical (2) with aluminum iodide. Compound 3 was characterized by single-crystal X-ray diffraction, UV-vis and EPR spectroscopy, SQUID magnetometry, and theoretical computations. The quartet ground state of triradical 3 has been unambiguously confirmed by variable-temperature continuous wave EPR experiments and SQUID magnetometry. Both SQUID magnetometry and broken-symmetry DFT computations reveal a small doublet-quartet energy gap [ΔEDQ = 0.18 kcal mol-1 (SQUID); ΔEDQ = 0.14 kcal mol-1 (DFT)]. The pulsed EPR experiment (electron spin echo envelop modulation) provides further evidence for the interaction of these dithiolene-based radicals with the central aluminum nucleus of 3.

Exploring Defect-Engineered Metal-Organic Frameworks with 1,2,4-Triazolyl Isophthalate and Benzoate Linkers.

Synthesis and characterization of DEMOFs (defect-engineered metal-organic frameworks) with coordinatively unsaturated sites (CUSs) for gas adsorption, catalysis, and separation are reported. We use the mixed-linker approach to introduce defects in Cu2-paddle wheel units of MOFs [Cu2(Me-trz-ia)2] by replacing up to 7% of the 3-methyl-triazolyl isophthalate linker (1L2-) with the "defective linker" 3-methyl-triazolyl m-benzoate (2L-), causing uncoordinated equatorial sites. PXRD of DEMOFs shows broadened reflections; IR and Raman analysis demonstrates only marginal changes as compared to the regular MOF (ReMOF, without a defective linker). The concentration of the integrated defective linker in DEMOFs is determined by 1H NMR and HPLC, while PXRD patterns reveal that DEMOFs maintain phase purity and crystallinity. Combined XPS (X-ray photoelectron spectroscopy) and cw EPR (continuous wave electron paramagnetic resonance) spectroscopy analyses provide insights into the local structure of defective sites and charge balance, suggesting the presence of two types of defects. Notably, an increase in CuI concentration is observed with incorporation of defective linkers, correlating with the elevated isosteric heat of adsorption (ΔHads). Overall, this approach offers valuable insights into the creation and evolution of CUSs within MOFs through the integration of defective linkers.

Frequency multiplexing enables parallel multi-sample EPR

Electron paramagnetic resonance (EPR) spectroscopy stands out as a powerful analytical technique with extensive applications in the fields of biology, chemistry, physics, and material sciences. It proves invaluable for investigating the molecular structure and reaction mechanisms of substances containing unpaired electrons, such as metal complexes, organic and inorganic radicals, and intermediate states in chemical reactions. However, despite their remarkable capabilities, EPR systems face significant limitations in terms of sample throughput, as current commercial systems only target the analysis of one sample at a time. Here we introduce a novel scheme for conducting ultra-high frequency continuous-wave EPR (CW EPR) targeting the EPR spectroscopy of multiple microliter volume samples in parallel. Our proof-of-principle prototype involves two decoupled detection cells equipped with high qualty factor Q=104\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$Q=104$$\\end{document} solenoidal coils tuned to 488 and 589 MHz, ensuring a significant frequency gap for effective radio frequency (RF) decoupling between the channels. To further enhance electromagnetic decoupling, an orthogonal alignment of the coils was adopted. The paper further presents an innovative radiofrequency circuit concept that utilizes a single physical RF channel to simultaneously conduct parallel EPR on up to eight cells. Parallel EPR experiments on two BDPA samples, each with a sample volume of 18.3 μL, registered signal-to-noise ratios of 255 and 252 for the two EPR measurement cells, with no observable coupling. The showcased prototype, built using cost-effective commercially available fabrication technology, is readily scalable and represents an initial step with promising potential for advancing sample screening with high-throughput parallel EPR.

Fatty acid binding to the human transport proteins FABP3, FABP4, and FABP5 from a Ligand’s perspective

Fatty acid binding proteins (FABPs) are a family of amphiphilic transport proteins with high diversity in terms of their amino acid sequences and binding preferences. Beyond their main biological role as cytosolic fatty acid transporters, many aspects regarding their binding mechanism and functional specializations in human cells remain unclear. In this work, the binding properties and thermodynamics of FABP3, FABP4 and FABP5 were analyzed under various physical conditions. For this purpose, the FABPs were loaded with fatty acids bearing fluorescence or spin probes as model ligands, comparing their binding affinities via microscale thermophoresis (MST) and continuous-wave electron paramagnetic resonance (CW EPR) spectroscopy. The CW EPR spectra of non-covalently bound 5- and 16-DOXYL stearic acid (5/16-DSA) deliver in-depth information about the dynamics and chemical environments of ligands inside the binding pockets of the FABPs. EPR spectral simulations allow the construction of binding curves, revealing two different binding states (‘intermediately’ and ‘strongly’ bound). The proportion of bound 5/16-DSA depends strongly on the FABP concentration and the temperature, but with remarkable differences between the three isoforms. Additionally, the more dynamic state (‘intermediately bound’) seems to dominate at body temperature with thermodynamic preference. The ligand binding studies were supplemented by aggregation studies via dynamic light scattering (DLS) and bioinformatic analyses. Beyond the remarkably fine-tuned binding properties exhibited by each FABP, which were discernible with our EPR-centered approach, the results of this work attest the power of simple spectroscopic experiments to provide new insights into the ligand binding mechanisms of proteins in general on a molecular level.

Analysis of early intermediate states of the nitrogenase reaction by regularization of EPR spectra

Due to the complexity of the catalytic FeMo cofactor site in nitrogenases that mediates the reduction of molecular nitrogen to ammonium, mechanistic details of this reaction remain under debate. In this study, selenium- and sulfur-incorporated FeMo cofactors of the catalytic MoFe protein component from Azotobacter vinelandii are prepared under turnover conditions and investigated by using different EPR methods. Complex signal patterns are observed in the continuous wave EPR spectra of selenium-incorporated samples, which are analyzed by Tikhonov regularization, a method that has not yet been applied to high spin systems of transition metal cofactors, and by an already established grid-of-error approach. Both methods yield similar probability distributions that reveal the presence of at least four other species with different electronic structures in addition to the ground state E0. Two of these species were preliminary assigned to hydrogenated E2 states. In addition, advanced pulsed-EPR experiments are utilized to verify the incorporation of sulfur and selenium into the FeMo cofactor, and to assign hyperfine couplings of 33S and 77Se that directly couple to the FeMo cluster. With this analysis, we report selenium incorporation under turnover conditions as a straightforward approach to stabilize and analyze early intermediate states of the FeMo cofactor.

Selective Transition Enhancement in a g-Engineered Diradical.

A diradical with engineered g-asymmetry was synthesized by grafting a nitroxide radical onto the [Y(Pc)2]⋅ radical platform. Various spectroscopic techniques and computational studies revealed that the electronic structures of the two spin systems remained minimally affected within the diradical system. Fluid-solution Electron Paramagnetic Resonance (EPR) experiments revealed a weak exchange coupling with |J| ~ 0.014 cm-1, subsequently rationalized by CAS-SCF calculations. Frozen solution continuous-wave (CW) EPR experiments showed a complicated and power-dependent spectrum that eluded analysis using the point-dipole model. Pulse EPR manipulations with varying microwave powers, or under varying magnetic fields, demonstrated that different resonances could be selectively enhanced or suppressed, based on their different tipping angles. In particular, Field-Swept Echo-Detected (FSED) spectra revealed absorptions of MW power-dependent intensities, while Field-Swept Spin Nutation (FSSN) experiments revealed two distinct Rabi frequencies. This study introduces a methodology to synthesize and characterize g-asymmetric two-spin systems, of interest in the implementation of spin-based CNOT gates.

Small multimodal thermometry with detonation-created multi-color centers in detonation nanodiamond

Detonation nanodiamond (DND) is the smallest class of diamond nanocrystal capable of hosting various color centers with a size akin to molecular pores. Their negatively charged nitrogen-vacancy center (NV−) is a versatile tool for sensing a wide range of physical and even chemical parameters at the nanoscale. The NV− is, therefore, attracting interest as the smallest quantum sensor in biological research. Nonetheless, recent NV− enhancement in DND has yet to yield sufficient fluorescence per particle, leading to efforts to incorporate other group-IV color centers into DND. An example is adding a silicon dopant to the explosive mixture to create negatively charged silicon-vacancy centers (SiV−). In this paper, we report on efficient observation (∼50% of randomly selected spots) of the characteristic optically detected magnetic resonance (ODMR) NV− signal in silicon-doped DND (Si-DND) subjected to boiling acid surface cleaning. The NV− concentration is estimated by continuous-wave electron spin resonance spectroscopy to be 0.35 ppm without the NV− enrichment process. A temperature sensitivity of 0.36K/Hz in an NV− ensemble inside an aggregate of Si-DND is achieved via the ODMR-based technique. Transmission electron microscopy survey reveals that the Si-DNDs core sizes are ∼11.2 nm, the smallest among the nanodiamond’s temperature sensitivity studies. Furthermore, temperature sensing using both SiV− (all-optical technique) and NV− (ODMR-based technique) in the same confocal volume is demonstrated, showing Si-DND’s multimodal temperature sensing capability. The results of the study thereby pave a path for multi-color and multimodal biosensors and for decoupling the detected electrical field and temperature effects on the NV− center.

Re-examination of the intumescence mechanism of ammonium polyphosphate/pentaerythritol/zeolite 4A fire-retarded formulation using advanced spectroscopic techniques

The mixture of ammonium polyphosphate and pentaerythritol is a very efficient intumescent system suitable for polyolefins, especially polypropylene. In this article, the intumescence mechanism of this intumescent system with and without zeolite 4A used as a synergy agent is revisited. The intumescent system was investigated in depth using continuous-wave electron paramagnetic resonance spectroscopy, solid-state nuclear magnetic resonance, and the advanced technique, namely hyperfine sublevel correlation pulsed electron paramagnetic resonance. It was observed that the char generated between 250°C and 350°C is made of polycyclic heterocyclic radicals with nitrogen atoms and that free radicals are mainly generated at these temperatures with a spin concentration relatively stable at least up to 500°C. Moreover, the presence of hydrogen, carbon, nitrogen, and phosphorus was clearly evidenced in the chemical environment of free electrons at 350°C (hyperfine sublevel correlation pulsed electron paramagnetic resonance). Besides, it was also evidenced that 4A totally collapses below 250°C. Contrary to previous works suggesting the presence of aluminosilicophosphate complexes, this work demonstrated that distinct alumino- and silicophosphate complexes are generated and protected the residue at high temperatures.

Cu(II)-binder complexes in azurite and malachite pictorial mixtures: An EPR study

Degradation processes of paintings, frescos, illuminations, and painted decorations represent a relevant challenge in the cultural heritage field for both conservators and scientists dealing with the causes of these processes. It is very important understanding the molecular origin of colour changes, like fading, yellowing, blackening, as well as the molecular origin of damages due to degradation, like cracking and fall of pictorial layers. Metal complexes, often indicated as “metal soaps”, when referred to metal carboxylates, play a relevant role in degradation. However, their identification is not easy, and the involvement of the metal ions in the degradation mechanisms is often not clear. Continuous Wave Electron Paramagnetic Resonance (CW-EPR) spectroscopy is a very sensitive tool towards paramagnetic species (e.g., transition metal ions like Fe(III), Cu(II), Mn(II), radicals, etc.), providing relevant information on these species, not always well-characterized with other methods. In this paper, we use CW-EPR to study the formation of Cu(II)-binder complexes in natural malachite and azurite pigments mixed with several organic binders. We show that CW-EPR technique is able to detect easily Cu(II) complexes with organic ligands, and can additionally provide information on the pigments themselves. In particular, the first coordination sphere of the Cu(II) complexes is characterized by applying the Peisach-Blumberg method. Moreover, CW-EPR shows that binders can affect the structure of the raw pigments.

Accurate reconstruction of 4D spectral–spatial images from sparse-view data in continuous-wave EPRI

In continuous-wave electron paramagnetic resonance imaging (CW EPRI), data are collected generally at densely sampled views sufficient for achieving accurate reconstruction of a four dimensional spectral–spatial (4DSS) image by use of the conventional filtered-backprojection (FBP) algorithm. It is desirable to minimize the scan time by collection of data only at sparsely sampled views, referred to as sparse-view data. Interest thus remains in investigation of algorithms for accurate reconstruction of 4DSS images from sparse-view data collected for potentially enabling fast data acquisition in CW EPRI. In this study, we investigate and demonstrate optimization-based algorithms for accurate reconstruction of 4DSS images from sparse-view data. Numerical studies using simulated and real sparse-view data acquired in CW EPRI are conducted that reveal, in terms of image visualization and physical-parameter estimation, the potential of the algorithms developed for yielding accurate 4DSS images from sparse-view data in CW EPRI. The algorithms developed may be exploited for enabling sparse-view scans with minimized scan time in CW EPRI for yielding 4DSS images of quality comparable to, or better than, that of the FBP reconstruction from data collected at densely sampled views.

Stable π-Extended Thio[7]helicene-Based Diradical with Predominant Through-Space Spin-Spin Coupling.

In this work, a novel π-extended thio[7]helicene scaffold was synthesized, where the α-position of the thiophene unit could be functionalized with bulky phenoxy radicals after considerable synthetic attempts. This open-shell helical diradical, ET7H-R, possesses high stability in the air, nontrivial π conjugation, persistent chirality, and a high diradical character (y0 of 0.998). The key feature is a predominant through-space spin-spin coupling (TSC) between two radicals at the helical terminals. Variable-temperature continuous-wave electron spin resonance (cw-ESR) and superconducting quantum interference device (SQUID) magnetometry in the solid state reveal a singlet ground state with a nearly degenerate triplet state of ET7H-R. These results highlight the significance of a stable helical diradicaloid as a promising platform for investigating intramolecular TSCs.

Copper Soaps Formation in Verdigris-Linseed Oil Painting Mixtures: A Multispectroscopic Characterization.

Copper acetate (also known as verdigris) is a bimetallic Cu(II) greenish pigment widely used in oil paintings. Since ancient times, this pigment has been known as a degradation-prone compound, especially when combined with lipidic binders. However, the degradation mechanism and the involved species have not yet been disclosed. In this article, we study verdigris interactions with linseed oil in painting mock-ups, stressing out the formation of copper-based complexes and proposing reaction routes. Such complex systems are studied by applying a complementary multispectroscopic approach: a combination of continuous-wave (CW) electron paramagnetic resonance (EPR), electron spin echo envelope modulation (ESEEM), and Raman and attenuated total reflection (ATR) Fourier transform infrared (FTIR) spectroscopies. Based on the experimental evidence, we propose the following mechanism: the neutral copper acetate shifts to a basic verdigris-promoting triglyceride hydrolysis, aided by the coordination of Cu(II) cations toward the carboxylic functions. The increased amount of free fatty acids in the mixtures triggers the formation of monomeric Cu(II) complexes. Afterward, the oil polymerization reaction occurs, and secondary oxidation species, containing OH groups in the alkyl chain, act as further ligands for copper nuclei. This is the first time, to the best of our knowledge, that a comprehensive view is proposed.

Exploring the dynamics and structure of PpiB in living Escherichiacoli cells using electron paramagnetic resonance spectroscopy.

The combined effects of the cellular environment on proteins led to the definition of a fifth level of protein structural organization termed quinary structure. To explore the implication of potential quinary structure for globular proteins, we studied the dynamics and conformations of Escherichia coli (E. coli) peptidyl-prolyl cis/trans isomerase B (PpiB) in E. coli cells. PpiB plays a major role in maturation and regulation of folded proteins by catalyzing the cis/trans isomerization of the proline imidic peptide bond. We applied electron paramagnetic resonance (EPR) techniques, utilizing both Gadolinium (Gd(III)) and nitroxide spin labels. In addition to using standard spin labeling approaches with genetically engineered cysteines, we incorporated an unnatural amino acid to achieve Gd(III)-nitroxide orthogonal labeling. We probed PpiB's residue-specific dynamics by X-band continuous wave EPR at ambient temperatures and its structure by double electron-electron resonance (DEER) on frozen samples. PpiB was delivered to E. coli cells by electroporation. We report a significant decrease in the dynamics induced by the cellular environment for two chosen labeling positions. These changes could not be reproduced by adding crowding agents and cell extracts. Concomitantly, we report a broadening of the distance distribution in E. coli, determined by Gd(III)-Gd(III) DEER measurements, as compared with solution and human HeLa cells. This suggests an increase in the number of PpiB conformations present in E. coli cells, possibly due to interactions with other cell components, which also contributes to the reduction in mobility and suggests the presence of a quinary structure.

A Continuous-Wave EPR Investigation into the Photochemical Transformations of the Chromium(I) Carbonyl Complex [Cr(CO)4bis(diphenylphosphino)]+ and Reactivity with 1-hexene.

Chromium complexes containing a bis(diphenylphosphino) ligand have attracted significant interest over many years due to their potential as active catalysts for ethylene oligomerisation when combined with suitable co-catalysts such as triethylaluminium (TEA) or methylaluminoxane (MAO). While there has been considerable attention devoted to the possible reaction intermediates and the nature of the Cr oxidation states involved, the potential UV photoactivity of the Cr(I) complexes has so far been overlooked. Therefore, to explore the photoinduced transformations of bis(diphenylphosphino) stabilized Cr(I) complexes, we used continuous-wave (CW) EPR to study the effects of UV radiation on a cationic [Cr(CO)4(dppp)]+[Al(OC(CF3)3)4]- complex (1), where dppp represents the 1,3 bis-(diphenylphosphino)propane ligand, Ph2P(C3H6)PPh2. Our preliminary investigations into the photochemistry of this complex revealed that [Cr(CO)4(dppp)]+ (1) can be readily photo-converted into an intermediate mer-[Cr(CO)3(κ1-dppp)(κ2-dppp)]+ complex (2) and eventually into a trans-[Cr(CO)2(dppp)2]+ complex (3) in solution at room temperature under UV-A light. Here, we show that the intermediate species (2) involved in this transformation can be identified by EPR at much lower temperature (140 K) and at a specific wavelength (highlighting the wavelength dependency of the reaction). In addition, small amounts of a 'piano-stool'-type complex, namely [Cr(CO)2(dppp-η6-arene)]+ (4), can also be formed during the photoconversion of [Cr(CO)4(dppp)]+ using UV-A light. There was no evidence for the formation of the [Cr(L-bis-η6-arene)]+ complex (5) in these UV irradiation experiments. For the first time, we also evidence the formation of a 1-hexene coordinated [Cr(CO)3(dppp)(1-hexene)]+ complex (6) following UV irradiation of [Cr(CO)4(dppp)]+ in the presence of 1-hexene; this result demonstrates the unprecedented opportunity for exploiting light activation during Cr-driven olefin oligomerisation catalysis, instead of expensive, difficult-to-handle, and hazardous chemical activators.

Probing structural and dynamic properties of MAPbCl3 hybrid perovskite using Mn2+ EPR.

Hybrid methylammonium (MA) lead halide perovskites have emerged as materials exhibiting excellent photovoltaic performance related to their rich structural and dynamic properties. Here, we use multifrequency (X-, Q-, and W-band) electron paramagnetic resonance (EPR) spectroscopy of Mn2+ impurities in MAPbCl3 to probe the structural and dynamic properties of both the organic and inorganic sublattices of this compound. The temperature dependent continuous-wave (CW) EPR experiments reveal a sudden change of the Mn2+ spin Hamiltonian parameters at the phase transition to the ordered orthorhombic phase indicating its first-order character and significant slowing down of the MA cation reorientation. Pulsed EPR experiments are employed to measure the temperature dependences of the spin-lattice relaxation T1 and decoherence T2 times of the Mn2+ ions in the orthorhombic phase of MAPbCl3 revealing a coupling between the spin center and vibrations of the inorganic framework. Low-temperature electron spin echo envelope modulation (ESEEM) experiments of the protonated and deuterated MAPbCl3 analogues show the presence of quantum rotational tunneling of the ammonium groups, allowing to accurately probe their rotational energy landscape.

Structural Flexibility of Tau in Its Interaction with Microtubules as Viewed by Site-Directed Spin Labeling EPR Spectroscopy.

Tau is a microtubule-associated protein that belongs to the Intrinsically Disordered Proteins (IDPs) family. IDPs or Intrinsically Disordered Regions (IDRs) play key roles in protein interaction networks and their dysfunctions are often related to severe diseases. Defined by their lack of stable secondary and tertiary structures in physiological conditions while being functional, these proteins use their inherent structural flexibility to adapt to and interact with various binding partners. Knowledges on the structural dynamics of IDPs and their different conformers are crucial to finely decipher fundamental biological processes controlled by mechanisms such as conformational adaptations or switches, induced fit, or conformational selection events. Different mechanisms of binding have been proposed: among them, the so-called folding-upon-binding in which the IDP adopts a certain conformation upon interacting with a partner protein, or the formation of a "fuzzy" complex in which the IDP partly keeps its dynamical character at the surface of its partner. The dynamical nature and physicochemical properties of unbound as well as bound IDPs make this class of proteins particularly difficult to characterize by classical bio-structural techniques and require specific approaches for the fine description of their inherent dynamics.Among other techniques, Site-Directed Spin Labeling combined with Electron Paramagnetic Resonance (SDSL-EPR) spectroscopy has gained much interest in this last decade for the study of IDPs. SDSL-EPR consists in grafting a paramagnetic label (mainly a nitroxide radical) at selected site(s) of the macromolecule under interest followed by its observation using and/or combining different EPR strategies. These nitroxide spin labels detected by continuous wave (cw) EPR spectroscopy are used as perfect reporters or "spy spins" of their local environment, being able to reveal structural transitions, folding/unfolding events, etc. Another approach is based on the measurement of inter-label distance distributions in the 1.5-8.0nm range using pulsed dipolar EPR experiments, such as Double Electron-Electron Resonance (DEER) spectroscopy. The technique is then particularly well suited to study the behavior of Tau in its interaction with its physiological partner: microtubules (MTs). In this chapter we provide a detailed experimental protocol for the labeling of Tau protein and its EPR study while interacting with preformed (Paclitaxel-stabilized) MTs, or using Tau as MT inducer. We show how the choice of nitroxide label can be crucial to obtain functional information on Tau/tubulin complexes.