Continuous Fluorescence Assay Research Articles

Retention of the RNA ends provides the molecular memory for maintaining the activation of the Csm complex.

The type III CRISPR-Cas effector complex Csm functions as a molecular Swiss army knife that provides multilevel defense against foreign nucleic acids. The coordinated action of three catalytic activities of the Csm complex enables simultaneous degradation of the invader's RNA transcripts, destruction of the template DNA and synthesis of signaling molecules (cyclic oligoadenylates cAn) that activate auxiliary proteins to reinforce CRISPR-Cas defense. Here, we employed single-molecule techniques to connect the kinetics of RNA binding, dissociation, and DNA hydrolysis by the Csm complex from Streptococcus thermophilus. Although single-stranded RNA is cleaved rapidly (within seconds), dual-color FCS experiments and single-molecule TIRF microscopy revealed that Csm remains bound to terminal RNA cleavage products with a half-life of over 1 hour while releasing the internal RNA fragments quickly. Using a continuous fluorescent DNA degradation assay, we observed that RNA-regulated single-stranded DNase activity decreases on a similar timescale. These findings suggest that after fast target RNA cleavage the terminal RNA cleavage products stay bound within the Csm complex, keeping the Cas10 subunit activated for DNA destruction. Additionally, we demonstrate that during Cas10 activation, the complex remains capable of RNA turnover, i.e. of ongoing degradation of target RNA.

Continuous Fluorescence Assay for In Vitro Translation Compatible with Noncanonical Amino Acids.

The tolerance of the translation apparatus toward noncanonical amino acids (ncAAs) has enabled the creation of diverse natural-product-like peptide libraries using mRNA display for use in drug discovery. Typical experiments testing for ribosomal ncAA incorporation involve radioactive end point assays to measure yield alongside mass spectrometry experiments to validate incorporation. These end point assays require significant postexperimental manipulation for analysis and prevent higher throughput analysis and optimization experiments. Continuous assays for in vitro translation involve the synthesis of fluorescent proteins which require the full complement of canonical AAs for function and are therefore of limited utility for testing of ncAAs. Here, we describe a new, continuous fluorescence assay for in vitro translation based on detection of a short peptide tag using an affinity clamp protein, which exhibits changes in its fluorescent properties upon binding. Using this assay in a 384-well format, we were able to validate the incorporation of a variety of ncAAs and also quickly test for the codon reading specificities of a variety of Escherichia coli tRNAs. This assay enables rapid assessment of ncAAs and optimization of translation components and is therefore expected to advance the engineering of the translation apparatus for drug discovery and synthetic biology.

Continuous Fluorescent Sirtuin Activity Assay Based on Fatty Acylated Lysines.

Lysine deacetylases, like histone deacetylases (HDACs) and sirtuins (SIRTs), are involved in many regulatory processes such as control of metabolic pathways, DNA repair, and stress responses. Besides robust deacetylase activity, sirtuin isoforms SIRT2 and SIRT3 also show demyristoylase activity. Interestingly, most of the inhibitors described so far for SIRT2 are not active if myristoylated substrates are used. Activity assays with myristoylated substrates are either complex because of coupling to enzymatic reactions or time-consuming because of discontinuous assay formats. Here we describe sirtuin substrates enabling direct recording of fluorescence changes in a continuous format. Fluorescence of the fatty acylated substrate is different when compared to the deacylated peptide product. Additionally, the dynamic range of the assay could be improved by the addition of bovine serum albumin, which binds the fatty acylated substrate and quenches its fluorescence. The main advantage of the developed activity assay is the native myristoyl residue at the lysine side chain avoiding artifacts resulting from the modified fatty acyl residues used so far for direct fluorescence-based assays. Due to the extraordinary kinetic constants of the new substrates (KM values in the low nM range, specificity constants between 175,000 and 697,000 M-1s-1) it was possible to reliably determine the IC50 and Ki values for different inhibitors in the presence of only 50 pM of SIRT2 using different microtiter plate formats.

A continuous fluorescence assay for simple quantification of bile salt hydrolase activity in the gut microbiome

The microbiota of the mammalian gut plays a dynamic role in controlling host physiology. The effect of gut microbiota activity on host health is particularly evident in the case of bile homeostasis. Bile is produced by the host and is modified by the gut microbiota, which impacts the net hydrophobicity of the total bile acid pool, and also modulates host signaling pathways. A key mechanism by which the microbiota modify bile is through deconjugation of bile salts through bile salt hydrolase (BSH) enzymatic activity, which is postulated to be a prerequisite for all further microbial metabolism. BSH activity in the gut is largely considered to be beneficial for the host, and genes encoding BSHs are found in the genomes of many taxa found in over-the-counter probiotics. Despite the therapeutic relevance of this enzyme, there is no sensitive and simple assay for continuous monitoring of BSH activity, and there are no non-destructive means of characterizing its activity in whole cell or microbial community samples. Herein, we describe a continuous fluorescence assay that can be used for characterization of BSH activity with purified protein, cell lysates, whole cells, and in human gut microbiome samples. The method is a “turn-on” reporter strategy, which employs synthetic substrates that yield a fluorescent product upon BSH-dependent turnover. This assay is used to show the first in vivo characterization of BSH activity. We also demonstrate continuous, non-destructive quantification of BSH activity in a human fecal microbiome sample containing recombinant BSH.

Continuous Fluorescence Assay for Peptidoglycan Glycosyltransferases.

Bacterial cell wall peptidoglycan is synthesized from its precursor lipid II by two enzymatic reactions. First, glycosyltransferases polymerize the glycan strands and second, DD-transpeptidases form cross-links between peptides of neighboring strands. Most bacteria possess bifunctional peptidoglycan synthesis enzymes capable of catalyzing both reactions. Here, we describe a continuous fluorescence glycosyltransferase assay using Dansyl-labeled lipid II as substrate. Progression of the reaction is monitored by the reduction in fluorescence over time. The assay is suitable to investigate the effect of protein interaction partners on the glycan strand synthesis activity of peptidoglycan polymerases.

Discovery of Novel Secretory Phospholipase A2 Inhibitors Using Virtual Screen

Human non-pancreatic secretory phospholipase A2 was reported to be associated with inflammatory diseases and considered as a potential drug target for inflammation and other related disease treatment. Although many human non-pancreatic secretory phospholipase A2 inhibitors were reported, few entered into the drug development stage due to various problems. In this study, we discovered seven novel human non-pancreatic secretory phospholipase A2 inhibitors using virtual screen. Of the 99 compounds tested by continuous fluorescence assay, seven are potent human non-pancreatic secretory phospholipase A2 inhibitors with micromolar IC50 values. Typical molecules include 9-fluorenylmethoxycarbonyl protected α-phenylalanine derivatives and azo compounds, which may serve as novel scaffold for developing potent human non-pancreatic secretory phospholipase A2 inhibitors. These compounds bind to human non-pancreatic secretory phospholipase A2 by interacting with the catalytic calcium ion and the hydrophobic regions in the substrate-binding pocket.

New Continuous Fluorometric Assay for Bacterial Transglycosylase Using Förster Resonance Energy Transfer

The emergence of antibiotic resistance has prompted scientists to search for new antibiotics. Transglycosylase (TGase) is an attractive target for new antibiotic discovery due to its location on the outer membrane of bacteria and its essential role in peptidoglycan synthesis. Though there have been a few molecules identified as TGase inhibitors in the past thirty years, none of them have been developed into antibiotics for humans. The slow pace of development is perhaps due to the lack of continuous, quantitative, and high-throughput assay available for the enzyme. Herein, we report a new continuous fluorescent assay based on Förster resonance energy transfer, using lipid II analogues with a dimethylamino-azobenzenesulfonyl quencher in the lipid chain and a coumarin fluorophore in the peptide chain. During the process of transglycosylation, the quencher-appended polyprenol is released and the fluorescence of coumarin can be detected. Using this system, the substrate specificity and affinity of lipid II analogues bearing various numbers and configurations of isoprene units were investigated. Moreover, the inhibition constants of moenomycin and two previously identified small molecules were also determined. In addition, a high-throughput screening using the new assay was conducted to identify potent TGase inhibitors from a 120,000 compound library. This new continuous fluorescent assay not only provides an efficient and convenient way to study TGase activities, but also enables the high-throughput screening of potential TGase inhibitors for antibiotic discovery.

Autoprocessing: an essential step for expression and purification of enterovirus 71 3Cpro in Escherichia coli

A gene encoding the 3BC of human enterovirus 71 (EV71) was cloned and inserted into a derivative of plasmid pET-32a(+) driven by T7 promoter. The expressed 3C protease (3C(pro)) autocatalytically cleaved itself from the recombinant protein Trx-3BC and the mature 3C(pro) partitioned in the soluble fraction of bacterial lysate. The 13-amino-acid peptide substrates with the junction of 3B/3C were used to verify the proteolysis activity of the purified 3C(pro). The EV71 3C(pro) had a Km value of 63 μM (measured by a continuous fluorescence assay). The other solid-phase activity assay of the EV71 3C(pro) was developed using HPLC to analyze the proteolytic products. The combination of two activity assays contributes to promote the identification of the specific inhibitors targeted to the EV71 3C(pro).

A continuous fluorescence assay for the characterization of Nudix hydrolases

The common substrate structure for the functionally diverse Nudix protein superfamily is nucleotide-diphosphate-X, where X is a large variety of leaving groups. The substrate specificity is known for less than 1% of the 29,400 known members. Most activities result in the release of an inorganic phosphate ion or of a product bearing a terminal phosphate moiety. Reactions have typically been monitored by a modification of the discontinuous Fiske–SubbaRow assay, which is relatively insensitive and slow. We report here the development of a continuous fluorescence assay that enables the rapid and accurate determination of substrate specificities in a 96-well format. We used this novel assay to confirm the reported substrate characterizations of MutT and NudD of Escherichia coli and to characterize DR_1025 of Deinococcus radiodurans and MM_0920 of Methanosarcina mazei. Novel findings enabled by the new assay include the following. First, in addition to the well-characterized hydrolysis of 8-oxo-dGTP at the α–β position, MutT cleaves at the β–γ phosphate bond at a rate of 3% of that recorded for hydrolysis at the α–β position. Second, MutT also catalyzes the hydrolysis of 5-methyl-dCTP. Third, 8-oxo-dGTP was observed to be the best substrate for DR_1025 of the 41 compounds screened.

Time-dependent, reversible, oxaborole inhibition of Escherichia coli leucyl-tRNA synthetase measured with a continuous fluorescence assay

Enzyme assays for the catalytic activity of aminoacyl-tRNA synthetases generally measure the incorporation of radioactive amino acids into tRNA. Such assays are necessarily discontinuous. Leucyl-tRNA synthetase has recently gained attention as the target of novel antimicrobial compounds based on the oxaborole scaffold, examples of which have been shown to have slow binding and dissociation kinetics. Investigations of the kinetics of inhibition by these compounds would be facilitated by a continuous assay of leucyl-tRNA synthetase catalysis. Here we report a continuous fluorescence intensity-based assay for leucyl-tRNA synthetase in which the pyrophosphate product is converted to phosphate, which is detected with nanomolar sensitivity by a phosphate sensor protein. This assay was used to measure the time constants for the slow onset of inhibition and long residence time of an oxaborole-based inhibitor.

A continuous fluorescent enzyme assay for early steps of lipid A biosynthesis

UDP-N-acetylglucosamine acyltransferase (LpxA) and UDP-3-O-(R-3-hydroxyacyl)-glucosamine acyltransferase (LpxD) catalyze the first and third steps of lipid A biosynthesis, respectively. Both enzymes have been found to be essential for survival among gram-negative bacteria that synthesize lipopolysaccharide and are viable targets for antimicrobial development. Catalytically, both acyltransferases catalyze an acyl-acyl carrier protein (ACP)-dependent transfer of a fatty acyl moiety to a UDP-glucosamine core ring. Here, we exploited the single free thiol unveiled on holo-ACP after transfer of the fatty acyl group to the glucosamine ring using the thiol-specific labeling reagent, ThioGlo. The assay was continuously monitored as a change in fluorescence at λex=379nm and λem=513nm using a microtiter plate reader. This assay marks the first continuous and nonradioactive assay for either acyltransferase.

Characterization of Flavonol Inhibition of DnaB Helicase: Real-Time Monitoring, Structural Modeling, and Proposed Mechanism

DnaB helicases are motor proteins essential for DNA replication, repair, and recombination and may be a promising target for developing new drugs for antibiotic-resistant bacteria. Previously, we established that flavonols significantly decreased the binding ability of Klebsiella pneumoniae DnaB helicase (KpDnaB) to dNTP. Here, we further investigated the effect of flavonols on the inhibition of the ssDNA binding, ATPase activity, and dsDNA-unwinding activity of KpDnaB. The ssDNA-stimulated ATPase activity of KpDnaB was decreased to 59%, 75%, 65%, and 57%, in the presence of myricetin, quercetin, kaempferol, and galangin, respectively. The ssDNA-binding activity of KpDnaB was only slightly decreased by flavonols. We used a continuous fluorescence assay, based on fluorescence resonance energy transfer (FRET), for real-time monitoring of KpDnaB helicase activity in the absence and presence of flavonols. Using this assay, the flavonol-mediated inhibition of the dsDNA-unwinding activity of KpDnaB was observed. Modeled structures of bound and unbound DNA showed flavonols binding to KpDnaB with distinct poses. In addition, these structural models indicated that L214 is a key residue in binding any flavonol. On the basis of these results, we proposed mechanisms for flavonol inhibition of DNA helicase. The resulting information may be useful in designing compounds that target K. pneumoniae and other bacterial DnaB helicases.

An enzyme-coupled continuous fluorescence assay for farnesyl diphosphate synthases

Farnesyl diphosphate synthase (FDPS) catalyzes the conversion of isopentenyl diphosphate and dimethylallyl diphosphate to farnesyl diphosphate, a crucial metabolic intermediate in the synthesis of cholesterol, ubiquinone, and prenylated proteins; consequently, much effort has gone into developing inhibitors that target FDPS. Currently most FDPS assays either use radiolabeled substrates and are discontinuous or monitor pyrophosphate release and not farnesyl diphosphate (FPP) creation. Here we report the development of a continuous coupled enzyme assay for FDPS activity that involves the subsequent incorporation of the FPP product of that reaction into a peptide via the action of protein farnesyltransferase (PFTase). By using a dansylated peptide whose fluorescence quantum yield increases upon farnesylation, the rate of FDPS-catalyzed FPP production can be measured. We show that this assay is more sensitive than existing coupled assays, that it can be used to conveniently monitor FDPS activity in a 96-well plate format, and that it can reproduce IC 50 values for several previously reported FDPS inhibitors. This new method offers a simple, safe, and continuous method to assay FDPS activity that should greatly facilitate the screening of inhibitors of this important target.

Purification and assay protocols for obtaining highly active Jumonji C demethylases

Jumonji C (JmjC) lysine demethylases (KDMs) are Fe(II)-dependent hydroxylases that catalyze the oxidative demethylation of methyllysine residues in histones and nonhistone proteins. These enzymes play vital roles in regulating cellular processes such as gene expression, cell cycle progression, and stem cell self-renewal and differentiation. Despite their biological importance, recombinant forms of JmjC KDMs generally display low enzymatic activity and have remained challenging to isolate in a highly active form. Here we present a simple affinity purification scheme for Strep(II)-tagged JmjC KDMs that minimizes contamination by transition state metal ions, yielding highly active and pure enzyme. We also describe an optimized continuous fluorescent assay for KDMs that detects formaldehyde production during demethylation via a coupled reaction using formaldehyde dehydrogenase. Purification and kinetic analysis of the human KDMs JMJD2A and JMJD2D using these methods yielded activities substantially higher than those previously reported for these enzymes, which are comparable to that of the flavin-dependent KDM LSD1. In addition, we show that JMJD2A exhibited a lower catalytic efficiency toward a histone peptide bearing a chemically installed trimethyllysine analog compared with a bona fide trimethylated substrate. The methodology described here is broadly applicable to other JmjC KDMs, facilitating their biochemical characterization and high-throughput screening applications.

Determination of lipoprotein lipase activity using a novel fluorescent lipase assay

A novel, real-time, homogeneous fluorogenic lipoprotein lipase (LPL) assay was developed using a commercially available substrate, the EnzChek lipase substrate, which is solubilized in Zwittergent. The triglyceride analog substrate does not fluoresce, owing to apposition of fluorescent and fluorescent quenching groups at the sn-1 and sn-2 positions, respectively, fluorescence becoming unquenched upon release of the sn-1 BODIPY FA derivative following hydrolysis. Increase in fluorescence intensity at 37°C was proportional to LPL concentration. The assay was more sensitive than a similar assay using 1,2-O-dilauryl-rac-glycero-3-glutaric acid-(6-methylresorufin ester) and was validated in biological samples, including determination of LPL-specific activity in postheparin mouse plasma. The simplicity and reproducibility of the assay make it ideal for in vitro, high-throughput screening for inhibitors and activators of LPL, thus expediting discovery of drugs of potential clinical value.

Lobe-specific Functions of Ca2+·Calmodulin in αCa2+·Calmodulin-dependent Protein Kinase II Activation

N-Methyl-d-aspartic acid receptor-dependent long term potentiation (LTP), a model of memory formation, requires Ca2+·calmodulin-dependent protein kinase II (αCaMKII) activity and Thr286 autophosphorylation via both global and local Ca2+ signaling, but the mechanisms of signal transduction are not understood. We tested the hypothesis that the Ca2+-binding activator protein calmodulin (CaM) is the primary decoder of Ca2+ signals, thereby determining the output, e.g. LTP. Thus, we investigated the function of CaM mutants, deficient in Ca2+ binding at sites 1 and 2 of the N-terminal lobe or sites 3 and 4 of the C-terminal CaM lobe, in the activation of αCaMKII. Occupancy of CaM Ca2+ binding sites 1, 3, and 4 is necessary and sufficient for full activation. Moreover, the N- and C-terminal CaM lobes have distinct functions. Ca2+ binding to N lobe Ca2+ binding site 1 increases the turnover rate of the enzyme 5-fold, whereas the C lobe plays a dual role; it is required for full activity, but in addition, via Ca2+ binding site 3, it stabilizes ATP binding to αCaMKII 4-fold. Thr286 autophosphorylation is also dependent on Ca2+ binding sites on both the N and the C lobes of CaM. As the CaM C lobe sites are populated by low amplitude/low frequency (global) Ca2+ signals, but occupancy of N lobe site 1 and thus activation of αCaMKII requires high amplitude/high frequency (local) Ca2+ signals, lobe-specific sensing of Ca2+-signaling patterns by CaM is proposed to explain the requirement for both global and local Ca2+ signaling in the induction of LTP via αCaMKII.

Optimization of conditions for the glycosyltransferase activity of penicillin‐binding protein 1a from Thermotoga maritima

Cell wall biosynthesis is a key target for antibacterial drugs. The major constituent of the bacterial wall, peptidoglycan, is a netlike polymer responsible for the size and shape of the cell and for resisting osmotic pressure. It consists of glycan chains of repeating disaccharide units cross-linked through short peptide chains. Peptidoglycan assembly is catalyzed by the periplasmic domain of bifunctional class A penicillin-binding proteins. Cross-linking of the peptide chains is catalyzed by their transpeptidase module, which can be inhibited by the most widely used antibiotics, the β-lactams. In contrast, no drug in clinical use inhibits the polymerization of the glycan chains, catalyzed by their glycosyltransferase module, although it is an obvious target. We report here the purification of the ectodomain of the class A penicillin-binding protein 1a from Thermotoga maritima (Tm-1a*), expressed recombinantly in Escherichia coli. A detergent screen showed that detergents with shorter aliphatic chains were better solubilizers. Cyclohexyl-hexyl-β-D-maltoside-purified Tm-1a* was found to be monomeric and to have improved thermal stability. A miniaturized, multiwell continuous fluorescence assay of the glycosyltransferase activity was used to screen for optimal reaction conditions. Tm-1a* was active as a glycosyltransferase, catalyzing the formation of glycan chains up to 16 disaccharide units long. Our results emphasize the importance of the detergent in preparing a stable monomeric ectodomain of a class A penicillin-binding protein. Our assay could be used to screen collections of compounds for inhibitors of peptidoglycan glycosyltransferases that could serve as the basis for the development of novel antibiotics.

Cerebrospinal fluid secretory Ca 2+-dependent phospholipase A2 activity: A biomarker of blood–cerebrospinal fluid barrier permeability

The blood–brain barrier, the blood–cerebrospinal fluid barrier (BCB) and other specialized brain barriers are increasingly recognized as a major obstacle to the treatment of most brain disorders. The impairment of these barriers has been implicated in neuropathology of several diseases, such as autism, ischemia, multiple sclerosis and Alzheimer disease. This dual function of the blood–neural barriers points out the importance and need for the development of techniques that can evaluate the nature and level of their integrity. Here we report the discovery of CSF secretory Ca 2+-dependent phospholipase A2 (sPLA2) activity as a measure of BCB permeability. Lumbar CSF from BCB impaired ( n = 26), multiple sclerosis ( n = 18) and healthy control ( n = 32) cases was analyzed using both a newly developed continuous fluorescence assay for CSF sPLA2 activity and CSF/Serum albumin ratio ( Q Alb), the most common and established method to evaluate BCB permeability. While both measurements showed no significant differences between multiple sclerosis and age-matched normal healthy cases, they were highly correlated. Though the CSF sPLA2 activity and Q Alb had over 95% agreement, the former was found to be more sensitive than the latter in measuring low levels of BCB impairment.

Real-time monitoring of RNA helicase activity using fluorescence resonance energy transfer in vitro

We have developed a continuous fluorescence assay based on fluorescence resonance energy transfer (FRET) for the monitoring of RNA helicase activity in vitro. The assay is tested using the hepatitis C virus (HCV) NS3 helicase as a model. We prepared a double-stranded RNA (dsRNA) substrate with a 5′ fluorophore-labeled strand hybridized to a 3′ quencher-labeled strand. When the dsRNA is unwound by helicase, the fluorescence of the fluorophore is emitted following the separation of the strands. Unlike in conventional gel-based assays, this new assay eliminates the complex and time-consuming steps, and can be used to simply measure the real-time kinetics in a single helicase reaction. Our results demonstrate that Alexa Fluor 488 and BHQ1 are an effective fluorophore–quencher pair, and this assay is suitable for the quantitative measurement of the RNA helicase activity of HCV NS3. Moreover, we found that several extracts of marine organisms exhibited different inhibitory effects on the RNA and DNA helicase activities of HCV NS3. We propose that this assay will be useful for monitoring the detailed kinetics of RNA unwinding mechanisms and screening RNA helicase inhibitors at high throughput.

Development of novel assays for lignin degradation: comparative analysis of bacterial and fungal lignin degraders

Two spectrophotometric assays have been developed to monitor breakdown of the lignin component of plant lignocellulose: a continuous fluorescent assay involving fluorescently modified lignin, and a UV-vis assay involving chemically nitrated lignin. These assays have been used to analyse lignin degradation activity in bacterial and fungal lignin degraders, and to identify additional soil bacteria that show activity for lignin degradation. Two soil bacteria known to act as aromatic degraders, Pseudomonas putida and Rhodococcus sp. RHA1, consistently showed activity in these assays, and these strains were shown in a small scale experiment to breakdown lignocellulose, producing a number of monocyclic phenolic products. Using milled wood lignin prepared from wheat straw, pine, and miscanthus, some bacterial lignin degraders were found to show specificity for lignin type. These assays could be used to identify novel lignin degraders for breakdown of plant lignocellulose.