Zinc dust having a high ZnO content can be obtained after the preliminary treatment of zinc-bearing dust generated by the iron and steel industry by using a rotary kiln. However, this material has a high concentration of chloride salts that can affect the hydro-metallurgical extraction of metallic zinc. The present study used a vacuum distillation-vacuum thermal reduction process to recover zinc metal from this dust. This process first separated chloride and PbO by vacuum distillation and then extracted metallic zinc via the vacuum silicothermic reduction of ZnO. The results show that high-purity ZnO was prepared by vacuum distillation using the original zinc dust as a raw material. Both alkali metal chlorides and PbO in the dust could be removed with greater than 99 % efficiency by vacuum distillation at 1000 °C. Following this step, the slag contained more than 80 wt% Zn but less than 0.01 wt% chlorine and PbO. The vacuum thermal reduction process used the slag obtained from distillation as the raw material together with ferrosilicon alloy as a reducing agent. ZnO was reduced above 1000 °C and the recovery of this oxide exceeded 99 % using a reduction temperature of 1200 °C, reduction time of 2 h, and ferrosilicon mass ratio of 0.27. The main phase in the slag after reduction was SiO2 and the ZnO concentration was below 1 wt%, indicating a purity greater than 99 %. This method can realize the separation, recovery, and reuse of zinc-bearing dust to maximize the value-added utilization of this resource.
Read full abstract