Electron Contact Research Articles

Tunability of 2D Graphene/H-diamane heterostructure under external electric field and strain engineering

Heterostructures have various physical and chemical properties compared to single-layer two-dimensional materials (2DMs), providing an effective method for improving optoelectronic device's performance. ln this work, we systematically examined the electronic structures, contact types, and optical properties of the Graphene/H-diamane heterostructure (Gr/H-diamane HTS) made of Gr and 2D H-diamane by the first-principles method. This HTS displays a p-type Schottky contact with a Schottky barrier height (SBH) of 0.01 eV. The SBH can be effectively tuned by applying electric field (EF) and strain engineering, and the transition from Schottky contact to Ohmic contact can be realized under vertical strain or external EF, which contributes to the improvement of device performance. In addition, the Gr/H-diamane HTS has a work function difference of 0.61 eV and a strong absorption capacity for infrared, visible, and ultraviolet light. Its peak absorption coefficient in the infrared region reaches 4 × 106 cm-1 and can be improved even further under EF. Therefore, the Gr/H-diamane HTS has enormous potential in applications including high-performance nanoelectronics and infrared photodetectors.

Investigating Surgical Mask Thermal Degradation via X‐Ray Techniques for Efficient Reuse

AbstractThe Covid‐19 crisis has led to a massive surge in the use of surgical masks worldwide, causing risks of shortages and high pollution. Reusing the masks may be promising to reduce such risks, especially since various decontamination techniques are being investigated. In this study, the thermal degradation of surgical masks was investigated using X‐ray‐based techniques such as XRD and XPS. Additional characterization was performed using scanning electron microscopy and contact angle measurements. XRD experiments reveal an increase in both crystal size and crystallinity of the mask with temperature until it is destroyed at 160 °C. However, XPS results show that there was no significant change in the surface chemistry of the mask, as no other chemical element has been detected in the mask heated up. Breathability has been proven compliant with standards until 150 °C.

Anti-Leishmanial Effects of a Novel Biocompatible Non-Invasive Nanofibers Containing Royal Jelly and Propolis against Iranian Strain of Leishmania major (MRHO/IR/75/ER): an In-Vitro Study.

Current medications especially the pentavalent antimonial compounds have been used as the first line treatment of cutaneous leishmaniasis (CL), but they have limitations due to serious side effects such as drug resistance, cardio and nephrotoxicity, and high costs. Hence, the demand to find more usable drugs is evident. Synthesis and development of natural, effective, biocompatible, and harmless compounds against Leishmania major is the principal priority of this study. By electrospinning method, a new type of nanofiber were synthesized from royal jelly and propolis with different ratios. Nanofibers were characterized by Scanning Electron Microscope (SEM), Transmission Electron Microscopy (TEM), Thermogravimetric Analysis (TGA), Contact angle, and Fourier-transform infrared spectroscopy (FTIR). The Half-maximal inhibitory concentration (IC50), Half-maximal effective concentration (EC50) and the 50% cytotoxic concentration (CC50) for different concentrations of nanofibers were determined using quantitative calorimetric methods. Inductively coupled plasma-optical emission spectrometry (ICP-OES) and flow cytometry were performed as complementary tests. The results showed that the proposed formulas provide a new achievement that, despite the significant killing activity on L. major, has negligible cytotoxicity on the host cells. Royal jelly nanofibers have significantly shown the best 72 hours results (IC50= 35 μg/ml and EC50=16.4 μg/ml) and the least cytotoxicity. This study presents a great challenge to introduce a new low-cost treatment method for CL, accelerate wound healing, and reduce scarring with minimal side effects and biocompatible materials. Royal jelly and propolis nanofibers significantly inhibit the growth of L. major in-vitro.

THE IMPACT OF SMARTPHONE USAGE ON PRESCHOOL AND SCHOOL-AGE CHILDREN INTELLIGENCE

Introduction – The internet is very important and useful for a variety of purposes, such as rapid sharing of information, entertainment, convenient electronic commerce, emotional support, and contact with other cultures, in the end, the internet is what we need, and so we use smartphones. A smartphone combines a mobile phone and the services of the internet. Smartphones offer many useful services that relieve our daily lives. Smartphones are not only used by young adult people, but also commonly used by children, both those are preschool and school-age children. Children spend a lot of time using smartphones instead of playing with their friends in real life. Some of them are even addicted to using smartphones all the time. Smartphone usage in children has both negative and positive impacts. The objective of this paper is to better understand the impact of smartphone usage on preschool and school-age children's intelligence. Methods – This paper takes a review method by 11 articles related to the main objective. Results – A resume by 11 articles reveals that damage to brain tissue and bone marrow of children’s heads absorbs almost ten times more than adults. Beyond their negative impact, still, positive impact refers to learning through interesting media so that it is easier for children to understand things they want to know. Discuss – Excessive smartphone usage by preschool children will cause various developmental problems and will cause a decrease in cognitive abilities. Excessive smartphone usage by school-age children makes children not interested in learning anymore and harms children’s achievement levels. The positive impacts are smartphone has so many educational media and applications and children can look for unlimited information easier. Conclusion – Although smartphone usage is known to have so many impacts on children’s cognitive development and children’s development in general, there is no evidence that smartphone usage has an effect on children’s intelligence which can be measured through IQ, so further research is needed. Keywords: smartphone usage, preschool, school.

A simple method for preparing flame retardancy EVA/POE‐g‐MAH composites with high tensile strength by modified magnesium hydroxide and aluminum hydroxide

AbstractFor obtaining flame retardant, oil resistance, high strength, and softness EVA/POE‐g‐MAH composites for cables, multifunctional modified magnesium hydroxide (MH‐KH570), and aluminum hydroxide (ATH‐KH570) were prepared by grafting γ‐(methacryloyloxy) propyltrimethoxysilane (KH570) onto the surface of MH and ATH. The successful grafting was confirmed by Fourier‐transform infrared spectrometer, scanning electron microscope, thermogravimetric analysis, and contact angle test. The hydrophobicity of MH and ATH was enhanced and the decompose time was extended, called the “sustained release” effect. The ethylene‐vinyl acetate copolymer (EVA)/maleic anhydride grafted polyolefin elastomer (POE‐g‐MAH) composites containing 62.5 wt% the mixture of MH‐KH570 and ATH‐KH570 in a 1:1 mass ratio was prepared. The vertical combustion test, limited oxygen index (LOI), and cone calorimetry proved the flame retardancy performance of the EVA/POE‐g‐MAH composites were enhanced, because of the homogeneous dispersion and the “sustained release” effect of MH‐KH570 and ATH‐KH570. The vertical combustion and LOI reached V‐0 and 38.1%. Importantly, the “crosslinking” effect of MH‐KH570 and ATH‐KH570 further enhanced the tensile strength after the composites crosslinked, and reached 19.9 MPa. In a word, a simple method for preparing flame retardant EVA/POE‐g‐MAH composites with high tensile strength was provided.

Influence of layered conductive coatings on electrochemical characteristics of NaFe(SO4)2cathode material

Rising production and consumption, and the high cost of lithium salts increased the price of lithium-ion batteries. Sodium-ion batteries are a promising replacement as safer and cheaper. However, the cathode materials for these batteries have low conductivity, which critically reduces their capacity. Modification with conductive additives is one way to solve this problem. Since a large electronic contact area of the active material with the conductive coating is required, the main candidates for such additives are materials with a layered structure. The purpose. To study the influence of layered conductive additives on the performance and kinetic parameters of eldfellite-structured cathode material. Methodology. By cyclic voltammetry and galvanostatic methods, it is found that as the 2D material additive concentration increases, the active material’s performance characteristics initially increase and then decrease, which is related to the sodium ions diffusion rate through the coating layer. Results and discussion. As a result of the modification effect evaluation of NaFe(SO4)2 cathode material with eldfellite structure by layered conductive coatings: graphite, molybdenum disulfide and MXene (Ti3C2Tx), it was determined that for each material there is a certain optimal concentration at which peak currents, capacitance and diffusion coefficient are maximized and resistance is minimized. The optimum additive quantities are 0.5% for MoS2 and MXene, and 0.2% for graphite. Conclusion. The influence of the concentration of 2D conductive coatings on the electrochemical properties of NaFe(SO4)2 intercalation material is shown.

Anisotropic Electron Mobility and Contact Resistance of β-Ga2O3 Obtained via Radio Frequency Transmission Line Methods on Schottky Devices.

Monoclinic semiconducting β-Ga2O3 has drawn attention, particularly because its thin film could be achieved via mechanical exfoliation from bulk crystals, which is analogous to van der Waals materials' behavior. For the transistor devices with exfoliated β-Ga2O3, the channel direction becomes [010] for in-plane electron transport, which changes to vertical [100] near the source/drain (S/D) contact. Hence, anisotropic transport behavior is certainly worth to study but rarely reported. Here we achieve the vertical [100] direction electron mobility of 4.18 cm2/(V s) from Pt/β-Ga2O3 Schottky diodes with various thickness via radio frequency-transmission line method (RF-TLM), which is recently developed. The specific contact resistivity (ρc) could also be estimated from RF-TLM, to be 4.72 × 10-5 Ω cm2, which is quite similar to the value (5.25 × 10-5 Ω cm2) from conventional TLM proving the validity of RF-TLM. We also fabricate metal-semiconductor field-effect transistors (MESFETs) to study anisotropic transport behavior and contact resistance (RC). RC-free [010] in-plane mobility appears as high as maximum ∼67 cm2/(V s), extracted from total resistance in MESFETs.

Electrochemical investigation and surface interaction of thiophene based Chitosan Schiff base on mild steel surface in 1 M HCl

Environment friendly Chitosan Thiophene carboxaldehyde Schiff base, a biopolymer derivative was synthesized to examine the inhibitive action of mild steel corrosion in 1 M Hydrochloric acid. Chitosan Thiophene carboxaldehyde Schiff base was prepared by the modification of Chitosan with thiophene carboxaldehyde through condensation reaction. The effect of Chitosan Schiff base as corrosion inhibitor was investigated using electrochemical impedance spectroscopy at higher temperature differentials of 313–343 K. Chitosan Schiff base showed enhanced corrosion resistance in all the studied temperature range by the forming protective film on the metal surface. The preliminary information about the complex formation in the solution phase, protective layer formation on the metal surface was investigated by Atomic absorption spectroscopy and Ultraviolet spectroscopic studies. The surface interaction between inhibitor molecules and mild steel surface was examined by Fourier Transform Infrared Spectroscopy, scanning electron microscopy and Contact angle measurements. The adsorption of inhibitor layer on the metal was monitored by cyclic voltammetry studies. Quantum chemical results support the possibility of surface interaction between inhibitor and empty orbitals of metal surface.

Removal of organochlorine pesticides by nanofiltration membranes modified with NH2-MWCNTs

Excessive use of pesticides and therefore the spread of pesticides in the environment with destructive effects on human and animal health is a very great problem in the world. In this study, the removal of three samples of organochlorine pesticides including aldrin, lindane, and endosulfan was investigated using nanofiltration membranes modified with NH2-MWCNTs. The properties of the prepared membranes were investigated by scanning electron microscopy (SEM), contact angle, water content, porosity, and mechanical strength. The performance of the membranes was evaluated by analysis of the rejection and flux of pesticide solutions at different pH. The addition of NH2-MWCNTs to the polymer matrix significantly improved the hydrophilic properties of the membranes and reduced the contact angle. Membrane flux was also improved by increasing the concentration of carbon nanotubes to 0.2 wt%. The highest flux at pH 10 is related to lindane pesticide. The modified membrane with 0.5 wt% functionalized carbon nanotubes showed a 98% rejection for endosulfan at neutral pH compared to the pure membrane. In the pH range experiment, lindane rejection was lower than of other pesticides. The steric hindrance due to the structure and molecular size of pesticides and interaction with membrane surface was very important in membrane efficiency. The M3 membrane with 0.3 wt% NH2-MWCNTs revealed high antifouling performance.

Both-Sided TOPCon Solar Cells – Towards a Lean Process Flow for Silicon Bottom Solar Cells

Silicon solar cells with both-side full-area passivating hole and electron contacts are viable candidates for application as bottom cells in tandem architectures. In this contribution, cells with poly-Si based contacts at both sides are investigated as a potential upgrade to the emerging i-TOPCon single junction devices featuring a passivating contact (poly-Si(n)/SiOx) only at the rear side and an alternative to the SHJ technology featuring a-Si based full-area passivating hole and electron contacts. We show that a higher thermal budget is needed to mediate between poly-Si(p)/SiOx hole and poly-Si(n)/SiOx electron contact when the same thermal interfacial SiOx is applied. This is addressed by using a PECVD oxide that is adapted to the needs of the hole and/or the electron contact. We present a proof-of-concept poly-Si(n)/SiOx/c-Si/SiOx/poly-Si(n) device with emphasis on a lean process flow. An all-PECVD process sequence for the hole contact, i.e., plasma oxides+i/p-a-Si deposited at 200°C in the same chamber was applied. With co-annealing of the contacts, no additional hydrogenation, and no edge insulation step, we observe no shunting and obtain efficiencies of up to 20.8% for M2 size cells, so far.

Structural Studies and Applications of Sulfobetaine-Based Polybetaines at Interfaces

The main goals of this research endeavor are to enhance the hydrophilic properties and water permeability of a nanofiltration membrane. This is achieved by incorporating a Zeolitic imidazolate framework (ZIF-8) layer that has been stabilized utilizing a redox-grafted methacrylate hydrogel. The decision to use polyacrylonitrile (PAN) as the substrate material was motivated by its intrinsic hydrophilic properties, which contribute to its ability to resist fouling and promote water permeability. The shift of the surface from hydrophilic to superhydrophilic was confirmed using physicochemical evaluations, including scanning electron microscopy (SEM) and contact angle measurements. Hydrolyzed Polyacrylonitrile Zeolitic imidazolate framework grafted (HPANZifG) membrane exhibited a remarkably high-water flux of 82.3 L/m2 Bar hour, which is an achievement of notable significance. This study makes a valuable contribution to the advancement of nanofiltration technology by proposing potential solutions to the challenges faced in the field of water purification and treatment.

Effects of Nd: YAG LASER irradiation and O2 plasma on the adhesive performance of poly-ether-ether-ketone (PEEK)

PurposeTo evaluate the effects of neodymium-doped yttrium aluminum garnet (Nd: YAG) LASER irradiation and oxygen (O2) plasma on the adhesive performance of polyether ether ketone (PEEK) and resin adhesive. MethodsNd: YAG LASERs of varying powers and O2 plasma for different durations were used to modify PEEK. A total of 168 PEEK specimens were randomly divided into seven groups (n = 24/group): (A) Control group: untreated PEEK, (B) L0.75 group: PEEK modified with 0.75 W Nd: YAG LASER, (C) L1 group: PEEK modified with 1.0 W Nd: YAG LASER, (D) L1.25 group: PEEK modified with 1.25 W Nd: YAG LASER, (E) P15 group: PEEK modified with 15 min of O2 plasma, (F) P25 group: PEEK modified with 25 min of O2 plasma, and (G) P35 group: PEEK modified with 35 min of O2 plasma. The surface characteristics of the materials were comprehensively analyzed using a scanning electron microscope (SEM), profilometer, energy-dispersive spectrometer (EDS), and contact angle tester. The adhesive specimens were bonded with Variolink N resin adhesive in all groups and each group was further divided into two subgroups (n = 12/group): (a) water storage for 56 h at 37 °C and (b) thermal cycling 5000 times. Shear bond strength (SBS) was tested using a universal testing machine, and the fracture modes were observed using an automated chemiluminescence analysis system to assess the effects of Nd: YAG LASER and O2 plasma on the bond strength of PEEK to resin adhesive. ResultsBoth Nd: YAG LASER and O2 plasma treatments altered the surface characteristics of PEEK and significantly increased the SBS between PEEK and Variolink N resin adhesive. The L0.75 group (Nd: YAG LASER) and the P35 group (O2 plasma) achieved the highest SBS, respectively. Furthermore, the SBS of the L0.75 group was higher than that of the P35 group. Following thermal cycling, SBS values decreased compared to the water storage subgroups. The fracture modes of the specimens in each group were predominantly interfacial and mixed, with no cohesive fractures observed. ConclusionsNd: YAG LASER irradiation and O2 plasma treatments can improve the SBS between PEEK and resin adhesive, with the 0.75 W Nd: YAG LASER being the preferred treatment method.

Three-dimensional heterostructured MnNiCoP/FeOOH cross-linked nano-flake supported by Ni Foam as a bifunctional electrocatalysts for overall water splitting

The production of three-dimensional heterogeneous structures is a vital approach for the creation of high-performance bifunctional electrocatalysts. Herein, three-dimensional heterostructure MnNiCoP/FeOOH (MNC-P/FeOOH) supported by Ni foam was prepared by simple electrodeposition and phosphorylation as a bifunctional electrocatalyst. The results showed that the required overpotential for MNC-P/FeOOH catalyst to reach 100 mA cm−2 current density was 124 mV and 251 mV in 1.0 M KOH solution, respectively. Construction of heterojunction not only improves the OER performance of MnNiCoP, but also reduces the potential required to drive the integral water splitting at 100 mA cm−2 current density. The electrocatalytic activity of MNC-P/FeOOH is greatly increased due to a distinctive interface synergy and strong electronic contacts in the MNC-P/FeOOH heterojunction. This design approach of bifunctional transition metal phosphides provides a potential route to achieve total water splitting.

Enhanced removal of iron (Fe) and manganese (Mn) ions from contaminated water using graphene oxide-decorated polyethersulphone membranes: Synthesis and characterization.

This study addresses the urgent issue of water pollution caused by iron (Fe) and manganese (Mn) ions. It introduces an innovative approach using graphene oxide (GO) and GO-decorated polyethersulphone (PES) membranes to efficiently remove these ions from contaminated water. The process involves integrating GO into PES membranes to enhance their adsorption capacity. Characterization techniques, including scanning electron microscopy, Fourier-transform infrared, and contact angle measurements, were used to assess structural and surface properties. The modified membranes demonstrated significantly improved adsorption compared to pristine PES. Notably, they achieved over 94% removal of Mn2+ and 93.6% of Fe2+ in the first filtration cycle for water with an initial concentration of 100 ppm. Continuous filtration for up to five cycles maintained removal rates above 60%. This research advances water purification materials, offering a promising solution for heavy metal ion removal. GO-decorated PES membranes may find application in large-scale water treatment, addressing environmental and public health concerns.

Artificial intelligence predictive analytics in heart failure: results of the pilot phase of a pragmatic randomized clinical trial.

We conducted an implementation planning process during the pilot phase of a pragmatic trial, which tests an intervention guided by artificial intelligence (AI) analytics sourced from noninvasive monitoring data in heart failure patients (LINK-HF2). A mixed-method analysis was conducted at 2 pilot sites. Interviews were conducted with 12 of 27 enrolled patients and with 13 participating clinicians. iPARIHS constructs were used for interview construction to identify workflow, communication patterns, and clinician's beliefs. Interviews were transcribed and analyzed using inductive coding protocols to identify key themes. Behavioral response data from the AI-generated notifications were collected. Clinicians responded to notifications within 24 hours in 95% of instances, with 26.7% resulting in clinical action. Four implementation themes emerged: (1) High anticipatory expectations for reliable patient communications, reduced patient burden, and less proactive provider monitoring. (2) The AI notifications required a differential and tailored balance of trust and action advice related to role. (3) Clinic experience with other home-based programs influenced utilization. (4) Responding to notifications involved significant effort, including electronic health record (EHR) review, patient contact, and consultation with other clinicians. Clinician's use of AI data is a function of beliefs regarding the trustworthiness and usefulness of the data, the degree of autonomy in professional roles, and the cognitive effort involved. The implementation planning analysis guided development of strategies that addressed communication technology, patient education, and EHR integration to reduce clinician and patient burden in the subsequent main randomized phase of the trial. Our results provide important insights into the unique implications of implementing AI analytics into clinical workflow.

Performance Evaluation of a Multifunctional Road Marking Coating for Tunnels Based on Nano SiO2 and TiO2 Modifications

Multifunctional road marking coatings with the functions of high-temperature stability, degradation of exhaust gas, and self-cleaning are of great significance for the safe operation and environmental protection of tunnels. This article uses active acrylic resin and an organosilicon hydrophobic agent as the base material, selects expanded vermiculite and glass microspheres as insulation fillers, and uses ammonium polyphosphate, pentaerythritol, melamine, and aluminum hydroxide as high-thermal-stability systems to prepare a two-component road marking coating base material. Then, nano SiO2 and modified nano TiO2 are added as modifiers to prepare a multifunctional road marking coating for tunnels. The physical and chemical properties of multifunctional road marking coatings are evaluating based on laboratory tests including thermogravimetry and derivative thermogravimetry, differential scanning calorimetry, infrared spectroscopy, scanning electron microscopy, exhaust degradation, and contact angle tests. The results indicate that the developed multifunctional road marking coating effectively reduces the thermal conductivity of the carbon layer through physical changes in the flame retardant system and the heat resistance formed by the high breaking bond energy of nano SiO2 during the combustion process. It forms a ceramic-like structure of titanium pyrophosphate with nano TiO2 that is beneficial for improving flame retardancy without generating harmful volatile gases and has good flame retardant properties. N–V co-doping reduces the bandgap of TiO2, broadens the absorption range of visible light by nano TiO2, improves the catalytic efficiency of visible light, and achieves the degradation efficiency of the four harmful components NOx, HC, CO, and CO2 in automotive exhaust by 23.4%, 8.3%, 2.5%, and 2.9%, respectively. The solid–liquid phase separation in the multifunctional road marking coating in the tunnel causes the formation and accumulation of nano SiO2 and TiO2 particles on the coating surface, resulting in a microstructure similar to the “micro–nano micro-convex” on the lotus leaf surface and making a water droplet contact angle of 134.2° on the coating surface.

Nanomaterial-Enhanced Sizings: Design and Optimisation of a Pilot-Scale Fibre Sizing Line

This study focuses on the development of a pilot-scale sizing line, including its initial design and installation, operational phases, and optimization of key process parameters. The primary objective is the identification of critical parameters for achieving a uniform sizing onto the fibres and the determination of optimal conditions for maximum production efficiency. This investigation focused on adjusting the furnace desizing temperature for the removal of commercial sizing, adjusting the drying temperature, as well as optimizing the corresponding residence time of carbon fibres passing through the furnaces. The highest production rate, reaching 1 m sized carbon fibres per minute, was achieved by employing a desizing temperature of 550 °C, a drying temperature of 250 °C, and a residence time of 1 min. Furthermore, a range of sizing solutions was investigated and formulated, exploring carbon-based nanomaterial types with different surface functionalizations and concentrations, to evaluate their impact on the surface morphology and mechanical properties of carbon fibres. In-depth analyses, including scanning electron microscopy and contact angle goniometry, revealed the achievement of a uniform coating on the carbon fibre surface, leading to an enhanced affinity between fibres and the polymeric epoxy matrix. The incorporation of nanomaterials, specifically N2-plasma-functionalized carbon nanotubes and few-layer graphene, demonstrated notable improvements in the interfacial shear properties (90% increase), verified by mechanical and push-out tests.

Healthcare Burden in Greenland of Gastrointestinal Symptoms in Adults with Inherited Loss of Sucrase-Isomaltase Function.

Congenital sucrase isomaltase deficiency (CSID) is in general a very rare disease. However, 2-3% of the Greenlandic population are homozygous (HO) carriers of an Arctic-specific loss-of-function (LoF) variant in the sucrase-isomaltase (SI) encoding gene, causing CSID. The condition is characterized by gastrointestinal symptoms such as stomachache, diarrhea, and weight loss when consuming sucrose, the most common dietary sugar. However, the awareness of the condition in the population and the healthcare system seems to be limited, potentially leading to a higher healthcare burden. Hence, we aimed to investigate whether HO-carriers visit the healthcare system more with gastrointestinal symptoms compared to the control groups by using registry data. We performed a case-control study identifying cases and controls using genotype information from the 1999-2001 and 2005-2010 Greenlandic health population cohorts. The cases were defined as HO LoF SI-carriers and controls were defined as non-carriers and were matched (1:1) on sex, age, place of residence, and European genetic admixture. We used electronic medical records to assess the number of electronic medical record contacts (EMRc) related to gastrointestinal symptoms and the number of gastrointestinal-related diagnostic procedures. A total of 80 HO-carriers and 80 non-carriers were included. The HO-carriers had 19% more EMRc related to gastrointestinal symptoms (IRR, 1.19, 95% CI [1.02;1.40], p=0.02) and had a 41% higher incidence of gastrointestinal related diagnostic procedures compared to controls (IRR, 1.41, 95% CI [1.05-1.92], p=0.02). Only one HO-carrier was aware of the condition according to the electronic medical records. HO-carriers of the LoF SI-variant had both significantly more gastrointestinal-related EMRc and significantly more diagnostic procedures conducted due to gastrointestinal symptoms. Only one HO-carrier was aware of the condition. Given the high prevalence of HO-carriers in the Greenlandic population, we anticipate that diagnosing more patients with CSID and providing dietary advice could potentially reduce symptom burden and healthcare visits among HO-carriers.

Inhibitory effects of 1-butylpyridin-1-ium bromide in 0.1 M sulphamic acid for mild steel

ABSTRACT In recent years, there has been a consistent development in the introduction of novel corrosion inhibitors due to their potential to reduce the dissolution of metal surfaces under various corrosive environments. The current study investigates the inhibitory effect of the surfactant 1-butylpyridin-1-ium bromide (BPB) on mild steel (MS) in 0.1 M sulphamic acid. The electrochemical impedance spectroscopy (EIS) and potentiodynamic polarisation (PDP) studies were used to analyse the inhibition investigations. In addition, atomic force microscopy (AFM), scanning electron microscopy (SEM) and contact angle (CA) measurements were also used to analyse the inhibition investigations. The PDP studies showed a maximum inhibition efficiency of 63.3% at 400 ppm concentration, demonstrating the inhibitor’s efficacy. The investigated compound was found to comply with the Temkin adsorption isotherm with an R 2 value of 0.99954. The results of PDP tests firmly suggest that the inhibitor is of mixed type. ΔG ads values of −9.659 kJ mol−1 suggested that the inhibitor adhered to the metal surface by physical adsorption. Based on the findings it appears that the molecules adhere to the surface of MS forming partial hydrophobic films that act as a barrier for the metal surface.

Neuro Receptor Signal Detecting and Monitoring Smart Devices for Biological Changes in Cognitive Health Conditions.

Currently, wearable sensors significantly impact health care through continuous monitoring and event prediction. The types and clinical applications of wearable technology for the prevention of mental illnesses, as well as associated health authority rules, are covered in the current review. The technologies behind wearable ECG monitors, biosensors, electronic skin patches, neural interfaces, retinal prosthesis, and smart contact lenses were discussed. We described how sensors will examine neuronal impulses using verified machine-learning algorithms running in real-time. These sensors will closely monitor body signals and demonstrate continuous sensing with wireless functionality. The wearable applications in the following medical fields were covered in our review: sleep, neurology, mental health, anxiety, depression, Parkinson's disease, epilepsy, seizures, and schizophrenia. These mental health conditions can cause serious issues, even death. Inflammation brought on by mental health problems can worsen hypothalamic-pituitary-adrenal axis dysfunction and interfere with certain neuroregulatory systems such as the neural peptide Y, serotonergic, and cholinergic systems. Severe depressive disorder symptoms are correlated with elevated Interleukin (IL-6) levels. On the basis of previous and present data collected utilizing a variety of sensory modalities, researchers are currently investigating ways to identify or detect the current mental state. This review explores the potential of various mental health monitoring technologies. The types and clinical uses of wearable technology, such as ECG monitors, biosensors, electronic skin patches, brain interfaces, retinal prostheses, and smart contact lenses, were covered in the current review will be beneficial for patients with mental health problems like Alzheimer, epilepsy, dementia. The sensors will closely monitor bodily signals with wireless functionality while using machine learning algorithms to analyse neural impulses in real time.