Constants Of Cu Research Articles

The role of metal ions and counterions in the switching behavior of a carboxylic acid functionalized spiropyran

The ability of a carboxylic acid functionalized spiropyran, SP, to act as a reversible and selective receptor for metal ions has been systematically examined. A series of spectroscopic measurements, combined with single-crystal X-ray diffraction have been employed in order to determine metal-ion sensitivity and selectivity, binding constants, solution compositions, binding kinetics as well as solid-state structure of a metal-complex of this ligand. This molecule acts as a chelating ligand and binds to metal ions using a triad of functionalities and will release the metal ion by application of visible light. Altering the complex from ZnCl(2) and Zn(ClO(4))(2), leads to only a small change in the complex absorption maxima from 494 to 492 nm, but produced a drastic increase in the sensitivity for the zinc(II) ion. Fluorescence spectroscopy was employed to establish that the detection limit for Zn(II) is approximately 3 x 10(-7) M for Zn(ClO(4))(2). The counterion also influences binding constants and the equilibrium constants for Cu(ClO(4))(2) and CuCl(2) are K = 3.37 x 10(4) M(-1) to K = 2.04 x 10(3) M(-1), respectively. Additionally, in the presence of perchlorate, the spiropyran-Cu complex formation is fast enough to allow for real-time naked eye detection of this metal ion in less than three minutes; the formation of other metal complexes takes between 50 minutes to 2 hours. Finally, the single-crystal structure determination of the SP-zinc chloride complex shows that the Zn(II) ion displays a distorted square-pyramidal arrangement, and neighbouring metal ions are bound together into a 1-D coordination polymer with a hydrophilic core, surrounded by hydrophobic 'cladding'.

Complexation in the Cu(II)–LiCl–H 2O system at temperatures to 423 K by UV-Visible spectroscopy

Thermodynamic data for the solubility and formation of copper(I)and copper(II) species are required to model innovative designs of the electrolysis cells used in the thermochemical copper-chloride hydrogen production process. Cumulative formation constants of Cu 2+(aq) complexes with Cl −(aq) were determined by Principal Component Analysis of UV-spectra, obtained over a very wide range of solution compositions and temperature, coupled with an appropriate model for activity coefficients of the solution species. Shortcomings in the existing database and future work to extend these studies to higher temperatures and much higher copper concentrations are discussed.

A Direct Determination of the Dissociation Constant for the Cu(II) Complex of Amyloid β 1−40 Peptide

Interactions of amyloid beta (Abeta) peptides with Cu(II) are believed to play a crucial role in the molecular mechanisms of neurotoxicity of Alzheimer's disease. There is, however, a serious disagreement regarding the strength of Cu(II) binding to these peptides. We used recombinant amyloid beta peptide 1-40 (Abeta40) to determine the stoichiometry and dissociation constants of Cu(II)-Abeta40 complexes using fluorescence spectroscopy. A single Cu(Abeta40) complex, characterized with the conditional dissociation constant K(d)(cond) = 57 +/- 5 nM was identified. This complex does not bind Hepes buffer molecules, as indicated by the total lack of relationship between K(d)(cond) values and Hepes concentration. The differences between this and other determinations of this constant and its relevance for the understanding of Cu(II) interaction with Abeta peptides are discussed.

Theories of surface elasticity for nanoscale objects

The emergence of nanotechnology has driven recent interest in systems having surface atoms as a significant fraction of all atoms present, in particular nano-sheets (ultra-thin slabs), nano-wires, and nano-particles. In these systems, the bulk (i.e. non-surface region or interior) is typically strained in response to the stress of the surface. This elastic strain of the bulk in turn changes the surface lattice constants. Since the bulk and the surface are coupled, the problem must be solved self-consistently. Solving this problem requires a quantitative model of the surface elastic properties which are different from the bulk. In this paper we consider various models that have been proposed for surface elasticity. Our goal is to elucidate the relationship between two contrasting approaches: (1) the Shuttleworth equation which defines a surface stress based on the strain derivative of the surface energy and (2) the Gurtin–Murdoch (GM) theory which considers the surface layer as a membrane with residual strain and with elastic constants different from the bulk. The GM theory is analogous to the 2-D Frenkel–Kontorova (FK) model and can be used to obtain quantitative parameters for the FK model. We present an embedded atom method calculation of the surface elastic constants of Cu(1 1 1) using the GM theory with the surface represented by a membrane one atomic layer thick. This quantitative approach describes the elastic properties of surfaces in a physically appealing way. Just as the bulk elastic constants provide direct information regarding the stress/strain relationship in a bulk material, the surface elastic constants provide similar information for a surface monolayer. This theory will allow elasticity analysis and atomistic calculations of properties of nano-scale objects.

A study on the inhibition kinetics of bioaccumulation of Cu(II) and Ni(II) ions using Rhizopus delemar

The microbial growth and simultaneous bioaccumulation of Cu(II) and Ni(II) ions during the growth of Rhizopus delemar in molasses medium was investigated in a batch system. The level of Cu(II) and Ni(II) bioaccumulation and microbial growth was dependent on pH, molasses sucrose concentration and initial Cu(II) and Ni(II) ion concentrations. An increase in initial total metal ion concentration inhibited both the growth rate of fungus and the bioaccumulation capacity. Lineweaver–Burk plot of Monod equation was used to study the inhibition kinetics of bioaccumulation of Cu(II) and Ni(II) and the intrinsic and apparent model parameters were evaluated in metals-free and metals-contaminated fermentation media. The maximum specific growth rate ( μ m) and the Monod constant ( K s) of microorganism in metals-free media were found as 0.405 L/h and 3.977 g/L, respectively. As μ m remained constant in the presence of increasing concentrations of Cu(II) and Ni(II) ions, the combined inhibition of Cu(II) and Ni(II) ions on the growth rate of R. delemar was found to be a competitive inhibition. The inhibition constants for Cu(II) and Ni(II) ions were determined as 56.71 mg Cu(II)/L and 47.44 mg Ni(II)/L. As the bioaccumulation of Cu(II) and Ni(II) ions was reduced by the presence of increasing concentrations of the other metal ion, compared with the single-metal systems, the individual action of Cu(II) and Ni(II) ions on the bioaccumulation of R. delemar was generally found to be antagonistic. On the other hand, the total combined effects of Cu(II) and Ni(II) ions on the bioaccumulation of R. delemar are thought to be synergistic since the total bioaccumulated metal ion quantities per unit mass of biomass were higher than those obtained in the growth media containing Cu(II) and Ni(II) ions alone at the same concentrations.

The N-terminal soluble domains of Bacillus subtilis CopA exhibit a high affinity and capacity for Cu(i) ions

CopA from Bacillus subtilis is a Cu(I)-transporting P-type ATPase involved in resistance to high levels of environmental copper. At its N-terminus are two soluble domains, a and b, that, when generated in isolation from the membrane part, have previously been shown to exhibit unusual Cu(I)-binding behaviour: at >1 Cu(I) per CopAab the protein dimerises, resulting in the formation of a species with luminescence properties characteristic of a solvent-shielded Cu(I) cluster. Further insight into the Cu(I)-binding properties of CopAab are now reported. We demonstrate that the initial binding of Cu(I) occurs with very high affinity (K = -4 x 10(17) M(-1)) and that CopAab can accommodate up to 4 Cu(I) per protein and remains dimeric at higher Cu(I)-loadings. Fitting of UV-visible, near UV CD, fluorescence and luminescence spectroscopic titration data supports a model in which Cu(I) binds sequentially to CopAab, and also provides estimates of the association constants for Cu(I)-binding and dimerisation steps. Finally, low molecular weight thiols are shown not to affect the initial binding of Cu(I), but significantly influence binding at levels >1 Cu(I) per CopAab such that dimerisation is inhibited, though not abolished.

Stability Constants and Dissociation Rates of the EDTMP Complexes of Samarium(III) and Yttrium(III)

AbstractThe stability constants of Sm(EDTMP) (log KML = 20.71) and Y(EDTMP) (log KML = 19.19) were determined by a competition reaction between the Ln3+ ion (Ln3+ = Sm3+ or Y3+) and Cu2+ for the EDTMP ligand by spectrophotometry at pH ≈ 10, in the presence of an excess amount of citrate (0.15 M NaCl, 25 °C). For determining the stability constants of Cu(EDTMP) (log KML = 19.36) and Ca(EDTMP) (log KML = 8.71) pH–potentiometry was used. In the pH range 4–9 the EDTMP complexes are present in the form of nonprotonated and mono‐, di‐ and triprotonated species. The Ca2+ ion forms a dinuclear complex with Ln(EDTMP). In a simplified blood plasma model consisting of Sm3+, Ca2+ and Zn2+ metal ions, EDTMP, citrate, cysteine and histidine ligands, Sm3+ is practically present in the form of [Sm(HEDTMP)Ca]2–, whereas Zn2+ predominantly forms [Zn(HEDTMP)]5– and [Zn(H2EDTMP)]4– complexes. For studying the dissociation rates of the complexes, the kinetics of the metal exchange (transmetallation) reactions between the Ln(EDTMP) complexes and Cu2+–citrate were investigated in the pH range 7–9 by the stopped‐flow method. The rates of the exchange reactions are independent of the Cu2+ concentration and increase with the H+ concentration. The rate constants, characterizing the proton‐assisted dissociation of the Ln(EDTMP) complexes, are several orders of magnitude higher than those of the similar Ln(EDTA) complexes, because the protonation constants of Ln(EDTMP) are high and the protonated Ln(HEDTMP) and Ln(H2EDTMP) species are present in higher concentration. The half‐times of dissociation of Sm(EDTMP) and Y(EDTMP) at pH = 7.4 and 25 °C are 4.9 and 7.5 s, respectively. These relatively short dissociation half‐time values do not predict the deposition of Ln3+ ions in bones in the form of intact Ln(EDTMP) complexes. It is more probable that sorption of the EDTMP ligand and Sm3+ or Y3+ ions occurs independently after the dissociation of complexes.(© Wiley‐VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, Germany, 2008)

Studies on Biologically Significant Copper (II) / Manganese (II) / Uranyl (II) - Isoleucine Binary Complexes

The stability constants of Cu 2+ , Mn 2+ and UO2 2+ complexes with isoleucine were determined by paper electrophoretic technique. Present method is based upon the migration of a spot of the metal ions on a paper strip at different pH's of background electrolyte. A graph of pH against mobility gives information about the binary complexes and permit to calculate their stability constants. The first and second stability constants of (Cu(II) - isoleucine), (Mn(II) - isoleucine) and (UO2(II) - isoleucine) complexes were found to be (8.41 ± 0.07; 6.43 ± 0.03), (3.87 ± 0.11; 2.61 ± 0.06) and (7.91 ± 0.13; 5.73 ± 0.04) for Cu(II), Mn(II) and UO2(II) complexes, respectively at ionic strength 0.1 Mol/L and a temperature of 35 0 C

Modeling Copper(II) Complexation in a Peat Soil Based on Spectroscopic Structural Information

The speciation of Cu in soils and surface waters is largely influenced by complexation reactions with natural organic matter (NOM). In this study, ion selective electrode data for the binding of Cu2+ to a forest peat soil were collected as a function of equilibration time, pH (2.4–6.6), and total Cu(II) concentration (1–54g Cu kg−1 dry soil). As a first step, a one‐site Langmuir isotherm was successfully fitted to the Cu adsorption data for the complete concentration range at pH 4.6. In a second step, structural information extracted from extended x‐ray absorption fine structure (EXAFS) spectroscopy, showing that Cu(II) forms five‐membered rings with possible combinations of amine, carboxyl, and carbonyl functional groups in NOM, were used as input for chemical speciation calculations (using the chemical equilibrium model MINTEQA2). In agreement with the EXAFS results, a model consisting of one RNH2, forming monodentate complexes (Cu2+ + RNH2 ↔ RH2NCu2+; log stability constant KRH2NCu2+ = 9.2; −log acid dissociation constant [pKa] = 9.0 for RNH3+), and two adjacent RCOO− groups, forming bidentate complexes (Cu2+ + 2RCOO− ↔ Cu(OOCR)2; log stability constant β(RCOO)2Cu = 4.7; pKa = 4.5 for RCOOH), gave the best fit to the experimental data. Determined stability constants for Cu(II)–amine and Cu(II)–carboxyl complexes were in good agreement with well‐defined Cu complexes with amino acids and carboxyls, respectively.

Effects of low-molecular-weight organic acids on Cu(II) adsorption onto hydroxyapatite nanoparticles

Adsorption kinetics and adsorption isotherms of Cu(II) onto a nanosized hydroxyapatite (HAP) in the absence and presence of different low-molecular-weight organic acids are studied in batch experiments. The results show that the adsorption kinetics of Cu(II) onto the HAP are best described by pseudo-second-order model, and the adsorption isotherms of Cu(II) onto the HAP fit Dubinin–Radushkevich model very well with high correlation coefficient ( R 2 = 0.97–0.99). The amount adsorbed of Cu(II) onto the HAP at pH 5.5 was much higher than that at pH 4.5. The presence of organic acids significantly decreased the adsorption quantity of Cu(II), clarifying the lower sorption affinities of Cu(II)–organic acid complexes onto the HAP rather than Cu(II) ion. The decreased maximal adsorption quantity of Cu(II) onto the HAP increased with the increasing logarithm of cumulative formation constants of Cu(II) and organic acids. The stronger coordination of organic acid with Cu(II), the more decreased Cu(II) adsorption quantity onto the HAP.

Study on spectroscopic characterization of Cu porphyrin/Co porphyrin and their interactions with ctDNA

The luminescence behaviors of Cu(II) meso-tetrakis (4- N-methyl-pyridiniumyl) porphyrin (Cu(II)TMPyP) and Co(II) meso-tetrakis (4- N-methyl-pyridiniumyl) porphyrin (Co(II)TMPyP) are investigated, and their interactions with calf thymus DNA (ctDNA) are studied by UV–vis, fluorescence and resonance light scattering (RLS) and based on the changes of UV–vis spectra, fluorescence and RLS spectra, the intrinsic binding constants of Cu(II)TMPyP/Co(II)TMPyP with ctDNA are obtained in the case of phosphate buffer solution (pH 7.2), respectively. According to the experimental results, it can be inferred that the interaction model of Cu(II)TMPyP with ctDNA is intercalative binding, while Co(II)TMPyP is the long-range assembly on the molecular surface of ctDNA.

Sorption properties of a composite material based on titanium phosphate in relation to nonferrous metal ions

Sorption of nonferrous metal ions under static conditions by a composite sorbent based on titanium phosphate was studied. The distribution coefficients and exchange constants for Cu(II), Ni(II), and Co(II) were calculated from the experimental data. The kinetics of the sorption of multiply charged ions from dilute hydrochloric acid solutions was studied, and the diffusion coefficients of exchanging ions were determined.

Evaluation of affinity constants of Cu, Cd, Ca and H for active soil surfaces for a solid phase-controlled soil ligand model

Environmental context. The speciation of metals in soils is controlled by the equilibrium between the solid and aqueous phases and by several parameters such as pH and total metal concentrations. The integration of affinity constants between several cations and active soil surfaces of different soils in the chemical equilibrium modelling software MINEQL+ allows a good evaluation of the chemical speciation of the metals. Abstract. A new approach, derived from the concept of the biotic ligand model, was used for the determination of the affinity constants of Ca, Cu, Cd and H to the active surfaces of different kinds of soils. This approach allowed us to obtain consistent data and to integrate these values in the chemical equilibrium modelling software MINEQL+ and eventually into a solid phase-controlled soil ligand model. This could then very easily be transformed into a terrestrial biotic ligand model by adding constants for biological components. We obtained the chemical speciation of the metals of interest by integrating the initial characteristics of the soil (pH; cation exchange capacity, CEC; total metal concentrations in soil extracts; ionic strength; and CO2 pressure). Comparison of the predicted and measured values of free Cu2+ is excellent using soil-specific affinity constants as well as average values. The average affinity constants between the active soil surfaces (S) and the target cations are log KCa–S = –0.84 (±0.01), log KCu–S = 5.3 (±0.1), log KCd–S = 4.4 (±0.2) and log KH–S = 4.1 (±0.2). External soils have been used to validate the conceptual model and the results show a very good correlation between the predicted and the measured free Cu (pCu) except for an acidic soil (pH < 5.2), highlighting the importance of integrating Al into the model.

First principles calculation of elastic and lattice constants of orthorhombic Cu3Sn crystal

The structure and elastic properties of a common intermetallic compound, Cu 3 Sn, at the interface of a solder and Cu metallization were investigated by the plane-wave pseudo-potential (PW-PP) method using the generalized gradient approximation (GGA). Through energy minimization, the lattice constants of the Cu 3 Sn orthorhombic crystal were calculated to within a very small range of the experimental values. Based on the structural information, the elastic constants of Cu 3 Sn crystal were determined from the first principles calculations. Using the single crystal results, the elastic constants of the polycrystalline Cu 3 Sn compound were predicted from the continuum theories. The predictions provided reasonable agreements with experimental data available.

Synthesis, DNA‐Binding, Cleavage, and Cytotoxic Activity of New 1,7‐Dioxa‐4,10‐diazacyclododecane Artificial Receptors Containing Bisguanidinoethyl or Diaminoethyl Double Side Arms

Novel 1,7-dioxa-4,10-diazacyclododecane artificial receptors with two pendant aminoethyl (3) or guanidinoethyl (4) side arms have been synthesized. Spectroscopy, including fluorescence and CD spectroscopy, of the interactions of 3, 4, and their copper(II) complexes with calf thymus DNA indicated that the DNA binding affinity of these compounds follows the order Cu(2+)-4>Cu(2+)-3>4>3, and the binding constants of Cu(2+)-3 are Cu(2+)-4 are 7.2x10(4) and 8.7x10(4) M(-1), respectively. Assessment by agarose gel electrophoresis of the plasmid pUC 19 DNA cleavage activity in the presence of the receptors showed that the complexes Cu(2+)-3 and Cu(2+)-4 exhibit powerful supercoiled DNA cleavage efficiency. Kinetic data of DNA cleavage promoted by Cu(2+)-3 and Cu(2+)-4 under physiological conditions fit to a saturation kinetic profile with kmax values of 0.865 and 0.596 h(-1), respectively, which give about 10(8)-fold rate acceleration over uncatalyzed supercoiled DNA. This acceleration is due to efficient cooperative catalysis of the copper(II) center and the functional (diamino or bisguanidinium) groups. In-vitro cytotoxic activities toward murine melanoma B16 cells and human leukemia HL-60 cells were also examined: Cu(2+)-4 shows the highest activity with IC(50) values of 1.62x10(-4) and 1.19x10(-5) M, respectively.

Characterization of the Binding of Cu(II) and Zn(II) to Transthyretin: Effects on Amyloid Formation

Although metal ions can promote amyloid formation from many proteins, their effects on the formation of amyloid from transthyretin have not been previously studied. We therefore screened the effects of Cu(II), Zn(II), Al(III), and Fe(III) on amyloid formation from wild-type (WT) transthyretin as well as its V30M, L55P, and T119M mutants. Cu(II) and Zn(II) promoted amyloid formation from the L55P mutant of transthyretin at pH 6.5 but had little effect on amyloid formation from the other forms of the protein. Zn(II) promoted L55P amyloid formation at pH 7.4 but Cu(II) inhibited it. Cu(II) gave dose-dependent quenching of the tryptophan fluorescence of transthyretin and the fluorescence of 1-anilino-8-naphthalene sulfonate bound to it. Zn(II) gave dose-dependent quenching of the tryptophan but not the 1-anilino-8-naphthalene sulfonate fluorescence. Apparent dissociation constants for Cu(II) and Zn(II) binding at pH 7.4 of approximately 10 nM and approximately 1 microM (approximately 0.4 microM and approximately 5 microM at pH 6.5), respectively, were obtained from the quenching data. Zn(II) enhanced urea-mediated the dissociation of the L55P but not the WT transthyretin tetramer. Cu(II), depending on its concentration, either had no effect or stabilized the WT tetramer but could enhance urea-mediated dissociation of L55P.

Structure-Function Analysis of the Cuprous Oxidase Activity in Fet3p from Saccharomyces cerevisiae

The Fet3 protein from Saccharomyces cerevisiae is a multicopper oxidase with specificity toward Fe(II) and Cu(I). Fet3p turnover of Fe(II) supports high affinity iron uptake across the yeast plasma membrane, whereas its turnover of Cu(I) contributes to copper resistance in yeast. The structure of Fet3p has been used to identify possible amino acid residues responsible for this protein's reactivity with Cu(I), and structure-function analyses have confirmed this assignment. Fet3p Met(345) is required for the enzyme's reactivity toward Cu(I). Although the Fet3pM345A mutant exhibits wild type spectral and electrochemical behavior, the kinetic constants for Cu(I) turnover and for single-turnover electron transfer from Cu(I) to the enzyme are significantly reduced. The specificity constant with Cu(I) as substrate is reduced by one-fifth, whereas the electron transfer rate from Cu(I) is reduced 50-fold. This mutation has little effect on the reactivity toward Fe(II), indicating that Met(345) contributes specifically to Fet3p reactivity with the cuprous ion. These kinetic defects render the Fet3pM345A unable to support wild type cellular copper resistance, suggesting that there is a finely tuned copper redox balance at the yeast plasma membrane.

Thermodynamic properties of Cu under high pressure

The total energies, structural properties and elastic constants of Cu at T=0 k have been calculated by the full-potential linearized muffin-tin orbital (FP-LMTO) scheme within the generalized gradient approximation (GGA) correction in the frame of density functional theory. Through the quasi-harmonic Debye model, in which the phononic effects are considered, the dependences of relative volume V/ V 0 on pressure P, cell volume V on temperature T, linear thermal expansion on temperature and Debye temperature Θ and specific heat C V on pressure are successfully obtained. The obtained pressure dependence of the normalized volume at 300 K is in excellent agreement with the experimental results.

Highly crosslinked ionic β-cyclodextrin polymers and their interaction with heavy metals

A new aqueous insoluble ionic β-cyclodextrin polymer (PYR) has been synthesized and a potentiometric study of the binary Cu(II)-PYR system is performed to calculate the complexation constants (as logβ in heterogeneous medium). The mathematical processing of the pH-metric data gave the formation constants of Cu(II) complexes and the related species distributions. The model is compatible with the presence of five complex species in the range of pH 2.5–7. Stoichiometry indicates the probable involvement of the alcoholate functionalities of the ligand in the complexation. The capacity of the polymer with respect to metal ions retention is evaluated for both Cu(II) and Cd(II) (chosen as target probes). The possibility to recover the sorbed Cd(II) is also tested by using acidic pH solutions. A complete recovery is obtained and the stability of the polymer is verified over ten steps of retention and desorption. To understand the complexation mechanism involved, two other cyclodextrin-based polymers are synthesized which are characterized by the presence of naphthalic dicarboxylic and carbonate groups as spacers. Their interactions with Cu(II) or Cd(II) are studied. Since the β-cyclodextrin polycarbonate polymer does not have acidic groups on the spacer, it is interesting to compare metal ions retention between this material, which does not present a real cation exchange site, and PYR.

Stoichiometry and conditional stability constants of Cu(II) or Zn(II) clioquinol complexes; implications for Alzheimer's and Huntington's disease therapy

Successful trials with 5-chloro-7-iodo-8-hydroxyquinoline (clioquinol, CQ) for Alzheimer's disease treatment prompted renewed interest in assessing whether its therapeutic action is related to the coordination of neurotoxic trace metals, such as Cu(II) and Zn(II). We now report conditional stability constants ( K C′) for CQ Cu(II) and Zn(II) complexes measured in a biological buffer containing Ca(II) and Mg(II) ions. UV–vis spectroscopy and polarography evidenced a 1:2 stoichiometry of Cu(II) and Zn(II) CQ complexes; the K C′s calculated were: Cu(CQ) 2 1.2 × 10 10, and Zn(CQ) 2 7.0 × 10 8 M −2; the CQ affinity for Cu(II) is at least an order of magnitude higher than for Zn(II). To test the possible functional relevance of the Cu(II) CQ complexes in the brain, we bioassayed free Cu(II) concentration by the metal-induced inhibition of ATP-gated currents of the P2X 4 receptor, a predominant brain P2X receptor. CQ reduced concentration-dependently the Cu(II) inhibition of the ATP-gated currents. In view that the stability constant of CQ for Zn(II) is similar to that of Aβ-amyloid for Zn(II), and the fact that CQ may form complexes with Cu(II), even in the presence of competing ions, the present results highlight that the formation of Cu(II) CQ complexes in the brain may act by diminishing free Cu(II) concentrations modifying thereby brain excitability, or favoring the degradation of β-amyloid plaques or huntingtin, rather than through a specific effect of CQ itself.