In this paper, an analysis to distinguish the geometric and porosimetric pore size distributions of a fibrous material is presented. The work is based on simulating the intrusion of nonwetting fluid in a series of 3-D fibrous microstructures obtained from 3-D image reconstruction or virtual geometries mathematically generated according to the properties of the media. We start our study by computing the pore size distribution of two typical hydroentangled nonwoven materials and present a theoretical model for their geometric pore size distributions based on Poisson line network model of the fibrous media. It is shown that the probability density function of the geometric pore size distribution can be approximated by a two-parametric Gamma distribution. We also study connectivity of the pore space in fibrous media by computing and comparing the accessible and allowed pore volumes in the form access function graphs. It is shown that the so-called ink-bottle effect can significantly influence the fluid intrusion in a porous material. The pore space connectivity of a homogeneous fibrous media is observed to be a function of thickness, solid volume fraction (SVF), and fiber diameter. It is shown that increasing the materials' thickness or SVF, while other properties are kept constant, reduces the pore space connectivity. On the other hand, increasing the fiber diameter enhances the connectivity of the pores if all other parameters are fixed. Moreover, modeling layered fibrous microstructures; it is shown that the access function graphs can be used to detect the location of the bottle neck pores in a layered/composite porous material.