Pore Conductance Research Articles

Impact analysis of particle sphericity on the properties of porous materials via particle packing method for hydrogen fuel and electrolysis cells

This study focuses on the impacts of particle's sphericity on the properties of porous materials crucial to electrochemical devices. Three-dimensional structures with spherical and cylindrical particles were generated to simulate porous granular and fibrous materials. The constructed particle geometries are as follows: a sphere and cylinders with different aspect ratios (height-to-diameter) of 0.1, 0.5, 1.0, 2.5, 5.0, 10, and 20. Every model exhibits a porosity of 0.500 ± 0.001 to exclude the effects of porosity. The structures were binarized with 200×200×200 dimensionless voxels, which were analyzed with the specific surface area, grain and pore size distributions, geometrical tortuosity, conductivity, and diffusivity across the through- and in-planes. As a result, the particle geometry significantly impacts on tortuosity, conductivity, and diffusivity, with the absolute value of Spearman's correlation coefficient of up to 1. It may imply the necessity to consider particle geometry as an ex-situ characterization for better electrochemical performance.

Frequency insensitive electromagnetic absorption core-shell sandwich structure with excellent electromagnetic damage tolerance

The compatibility of broadband electromagnetic absorption and electromagnetic damage tolerance poses challenges to the regulation of electromagnetic response characteristics, which are typically restricted by the intrinsic dispersion of materials and strong resonant features of unit cell structures. In this work, triply-periodic-minimal-surfaces (TPMS) based gradient core-shell sandwich structure is proposed to address this challenge for its mathematical defined unique conductive pore structure. The reflection loss-frequency curve is less than −10 dB in 2–18 GHz frequency band, accompanied by two separate resonant absorption peaks at 2.4 GHz and 17.5 GHz. The reflection loss curve is insensitive to frequency in a wide frequency band of 4–14 GHz, using merely three kinds of absorbing materials. When the damage proportion is less than 40 %, effective electromagnetic absorption can be maintained in panel damage, core damage and penetrating damage modes, thanks to the extraordinary conduction-dissipation effect. Our study provides valuable insights for the design of damage tolerant electromagnetic absorption structures.

Structural Basis for Voltage Gating and Dalfampridine Binding in the Shaker Potassium Channel.

The generation and propagation of action potentials in neurons depend on the coordinated activation of voltage-dependent sodium and potassium channels. Potassium channels of the Shaker family regulate neuronal excitability through voltage-dependent opening and closing of their ion conduction pore. This family of channels is an important therapeutic target, particularly in multiple sclerosis where the inhibitor dalfampridine (4-aminopyridine) is used to improve nerve conduction. The molecular details of how the voltage sensor domain drives opening of the pore domain has been limited by the lack of closed-state structures, also impairing the search for novel drugs. Using AlphaFold2-based conformational sampling methods we identify a structural model for the closed Shaker potassium channel where movement of the voltage sensor drives the opening trough interactions between the S4-S5 linker and S6 helix. We show experimentally that breakage of a backbone hydrogen bond is a critical part of the activation pathway. Through docking we identify a hydrophobic cavity formed by the pore domain helices that binds dalfampridine in the closed state. Our results demonstrate how voltage sensor movement drives pore opening and provide a structural framework for developing new therapeutic agents targeting the closed state. We anticipate this work will enable structure-based drug design efforts focused on state-dependent modulation of voltage-gated ion channels for the treatment of neurological disorders.

Structural basis of α-latrotoxin transition to a cation-selective pore

The potent neurotoxic venom of the black widow spider contains a cocktail of seven phylum-specific latrotoxins (LTXs), but only one, α-LTX, targets vertebrates. This 130 kDa toxin binds to receptors at presynaptic nerve terminals and triggers a massive release of neurotransmitters. It is widely accepted that LTXs tetramerize and insert into the presynaptic membrane, thereby forming Ca2+-conductive pores, but the underlying mechanism remains poorly understood. LTXs are homologous and consist of an N-terminal region with three distinct domains, along with a C-terminal domain containing up to 22 consecutive ankyrin repeats. Here we report cryoEM structures of the vertebrate-specific α-LTX tetramer in its prepore and pore state. Our structures, in combination with AlphaFold2-based structural modeling and molecular dynamics simulations, reveal dramatic conformational changes in the N-terminal region of the complex. Four distinct helical bundles rearrange and together form a highly stable, 15 nm long, cation-impermeable coiled-coil stalk. This stalk, in turn, positions an N-terminal pair of helices within the membrane, thereby enabling the assembly of a cation-permeable channel. Taken together, these data give insight into a unique mechanism for membrane insertion and channel formation, characteristic of the LTX family, and provide the necessary framework for advancing novel therapeutics and biotechnological applications.

3D structured lithiophilic current collector with lithiation nucleation overpotential near 0 V for dendrite-free lithium metal anode

The poor lithium affinity of most metal skeletons leads to uneven electric field distribution, resulting in the notorious Li dendrite growth. Herein, a 3D structured Cu mesh@Ag current collector is introduced using a simple chemical plating method to enable dendrite-free Li anode. The high electronic conductivity and matrix pore structure of Cu mesh can alleviate the local current density and provide buffer space for lithium deposition. The lithiophilic Ag can form infinite solid solution with Li while reducing the initial lithiation nucleation overpotential to about 0 V, achieving homogenous Li deposition. As a result, the symmetric cell can maintain a low polarization voltage (20 mV) after cycling at 0.5 mA cm-2 for 1300 h Full cells assembled with LiFePO4 cathode present a long-term cycling stability of 500 cycles at 1C with a capacity retention of 80.3%. This work provides a reliable approach to create stable Li-metal batteries.

Harvesting Enhanced Blue Energy in Charged Nanochannels Using Semidiluted Polyelectrolyte Solution.

Blue energy generation in nanochannels based on salinity gradients is currently the most promising method in the area of nonconventional energy production. We used a semidiluted pure sodium carboxymethylcellulose (NaCMC)-KCl aqueous solution to study the characteristics of blue energy generation within a charged nanochannel. We solve the corresponding equations for ionic transport using a numerical technique based on the finite element method. Our analysis focused on the electric double layer (EDL) potential field, open circuit current, diffuse potential, electric conductance, maximum generated pore power, and maximum energy conversion efficiency by varying concentrations of the salt in the left-side reservoir and the bulk polyelectrolyte. The results indicate that as the polyelectrolyte concentration increases, the extent of EDL overlap considerably reduces. With an increase in polyelectrolyte concentration, the open circuit current increases, while the diffuse potential reduces. It was observed that both electrical conductance and maximal pore power improve considerably with higher polyelectrolyte concentrations. Interestingly, our modeling framework demonstrates a power density substantially higher (up to 16.31 W/m2) than earlier configurations and surpasses the established commercial limit (5 W/m2). Furthermore, our findings reveal that the reservoir salt concentration significantly affects the rate of decline in the maximum energy conversion efficiency as the polyelectrolyte concentration increases. The research paves the way for the development of high-power-density devices with several practical applications.

Mechanism of human α3β GlyR modulation in inflammatory pain and 2, 6-DTBP interaction.

α3β glycine receptor (GlyR) is a subtype of the GlyRs that belongs to the Cys-loop receptor superfamily. It is a target for non-psychoactive pain control drug development due to its high expression in the spinal dorsal horn and indispensable roles in pain sensation. α3β GlyR activity is inhibited by a phosphorylation in the large internal M3/M4 loop of α3 through the prostaglandin E2 (PGE2) pathway, which can be reverted by a small molecule analgesic, 2, 6-DTBP. However, the mechanism of regulation by phosphorylation or 2, 6-DTBP is unknown. Here we show M3/M4 loop compaction through phosphorylation and 2, 6-DTBP binding, which in turn changes the local environment and rearranges ion conduction pore conformation to modulate α3β GlyR activity. We resolved glycine-bound structures of α3β GlyR with and without phosphorylation, as well as in the presence of 2, 6-DTBP and found no change in functional states upon phosphorylation, but transition to an asymmetric super open pore by 2, 6-DTBP binding. Single-molecule Forster resonance energy transfer (smFRET) experiment shows compaction of M3/M4 loop towards the pore upon phosphorylation, and further compaction by 2, 6-DTBP. Our results reveal a localized interaction model where M3/M4 loop modulate GlyR function through physical proximation. This regulation mechanism should inform on pain medication development targeting GlyRs. Our strategy allowed investigation of how post-translational modification of an unstructured loop modulate channel conduction, which we anticipate will be applicable to intrinsically disordered loops ubiquitously found in ion channels.

Supramolecular Metal-Organic Framework for the High Stability of Aqueous Rechargeable Zinc Batteries.

Aqueous rechargeable Zn batteries (AZBs) are considered to be promising next-generation battery systems. However, the growth of Zn dendrites and water-induced side reactions have hindered their practical application, especially with regard to long-term cyclability. To address these challenges, we introduce a supramolecular metal-organic framework (SMOF) coating layer using an α-cyclodextrin-based MOF (α-CD-MOF-K) and a polymeric binder. The plate-like α-CD-MOF-K particles, combined with the polymeric binder create dense and homogeneous Zn2+ ion conductive pore channels that can vertically transport Zn2+ ions through the cavity while restricting the contact of water molecules. Molecular dynamics (MD) simulation verifies that Zn2+ ions can reversibly migrate through the pores of α-CD-MOF-K by partial dehydration. The uniform Zn deposition/dissolution promotes a smooth solid-electrolyte interface layer on the Zn metal anode and effectively suppresses side reactions with free water molecules. The α-CD-MOF-K@Zn symmetric cell exhibits stable cycling and a small polarization voltage of 70 mV for 800 h at 5 mA cm-2, and the α-CD-MOF-K@Zn|α-MnO2 full cell shows only 0.12% capacity decay per cycle at a rate of 1 A g-1.

Intrinsically Conductive and Cu-Functionalized Polymer-Composite Membranes as Gas Diffusion Electrodes for CO2 Electroreduction.

We introduced a new class of gas diffusion electrodes (GDEs) with adjustable pore morphology. We fabricated intrinsically conductive polymer-composite membranes containing carbon filler, enabling a pore structure variation through film casting cum phase separation protocols. We further selectively functionalized specific pore regions of the membranes with Cu by a NaBH4-facilitated coating strategy. The as-obtained GDEs can facilitate the electrochemical CO2 reduction reaction (CO2RR) at Cu active sites that are presented inside a defined and electrically conductive pore system. When employing them as free-standing cathodes in a CO2 flow electrolyzer, we achieved >70% Faradaic efficiencies for CO2RR products at up to 200 mA/cm2. We further demonstrated that deposition of a dense Cu layer on top of the membrane leads to obstruction of the underlying pore openings, inhibiting an excessive wetting of the pore pathways that transport gaseous CO2. However, the presentation of Cu inside the pore system of our novel membrane electrodes increased the C2H4/CO selectivity by a factor of up to 3 compared to Cu presented in the dense layer on top of the membrane. Additionally, we found that gaseous CO2 could still access Cu in macropores after wetting with electrolyte, while CO2RR was completely suppressed in wetted nm-scale pores.

Capacitive deionization: Capacitor and battery materials, applications and future prospects

Water scarcity all over the world attracts alternative methods to purify saline water and supplement the available dwindling freshwater resources. Capacitive deionization (CDI) is hopeful to supply water to the population due to operation at low potential along with low energy expenditure when low salinity (5 mM NaCl) feed water solutions are desalinated. Electrode material is the main controlling factor in CDI system and a lot of efforts are devoted to develop excellent materials for better CDI performance. So far, carbon materials are widely used as the electrode for CDI, though limitations such as co-ion expulsion and faradaic reactions hinder their full utilization. Alternatively, battery materials are used since their performance is great due to mitigation of co-ions ejection as well as faradaic reactions. In 2019 our group reviewed factors affecting the performance of activated carbon electrode materials and revealed lack of selectivity, co-ion expulsion, low electrical conductivity and inappropriate pore size distribution to largely contribute to its low salt removal capacity [1]. Therefore, herein, we extend the discussion beyond AC to include other carbons such as aerogels, nanotubes, graphenes etc., and battery materials such as MXenes, sodium super ionic conductors, and BiOCl to mention the few. This article also discusses the extent CDI is applied in the laboratory scale as well as in the field for desalination of real water, wastewater remediation and removal of harmful contaminants to substantiate what it can offer beyond the laboratory experiments. The work is expected to save as a complete reference for the progress of CDI electrode materials and its applications in water purification.

Structural insights into the molecular effects of the anthelmintics monepantel and betaine on the Caenorhabditis elegans acetylcholine receptor ACR-23

Anthelmintics are drugs used for controlling pathogenic helminths in animals and plants. The natural compound betaine and the recently developed synthetic compound monepantel are both anthelmintics that target the acetylcholine receptor ACR-23 and its homologs in nematodes. Here, we present cryo-electron microscopy structures of ACR-23 in apo, betaine-bound, and betaine- and monepantel-bound states. We show that ACR-23 forms a homo-pentameric channel, similar to some other pentameric ligand-gated ion channels (pLGICs). While betaine molecules are bound to the classical neurotransmitter sites in the inter-subunit interfaces in the extracellular domain, monepantel molecules are bound to allosteric sites formed in the inter-subunit interfaces in the transmembrane domain of the receptor. Although the pore remains closed in betaine-bound state, monepantel binding results in an open channel by wedging into the cleft between the transmembrane domains of two neighboring subunits, which causes dilation of the ion conduction pore. By combining structural analyses with site-directed mutagenesis, electrophysiology and in vivo locomotion assays, we provide insights into the mechanism of action of the anthelmintics monepantel and betaine.

Increased concentrations of P2X7R in oligodendrocyte derived extracellular vesicles of Multiple sclerosis patients

Activation of the purinergic receptor P2X7 (P2X7R) is believed to be deleterious in autoimmune diseases and it was hypothesized to play a role in the pathogenesis of MS. P2X7R is an ATP-gated non-selective cationic channel; its activation can be driven by high concentrations of ATP and leads to the generation of large, cytolytic conductance pores. P2X7R activation can also result in apoptosis as a consequence of the activation of the caspase cascade via P2X7R-dependent stimulation of the NLRP3 inflammasome. We measured P2X7R in oligodendrocyte derived extracellular vesicles (ODEVs) in MS patients and in healthy subjects.Sixty-eight MS patients (50 relapsing-remitting, RR-MS, 18 primary progressive, PP-MS) and 57 healthy controls (HC) were enrolled. ODEVs were enriched from serum by a double step immunoaffinity method using an anti OMGp (oligodendrocyte myelin glycoprotein) antibody. P2X7R concentration was measured in ODEVs lysates by ELISA.One–way Anova test showed that P2X7R in ODEVs is significantly higher in PP-MS (mean: 1742.89 pg/mL) compared both to RR-MS (mean: 1277.33 pg/mL) (p < 0.001) and HC (mean: 879.79 pg/mL) (p < 0.001). Comparison between RR-MS and HC was also statistically significant (p < 0.001). Pearson's correlations showed that P2RX7 in ODEVs was positively correlated with EDSS (p = 0.002, r = 0.38, 0.15–0.57 95% CI) and MSSS (p = 0.004, r = 0.34, 0.12–0.54 95% CI) scores, considering MS patients together (PP-MS + RR-MS) and with disease duration in PP-MS group (p = 0.02, r = 0.53, 0.09–0.80 95% CI).Results suggest that ODEVs-associated P2X7R levels could be a biomarker for MS.

Electromagnetic porous lignocellulosic matrix composites: A green electromagnetic shielding material with high absorption efficient electromagnetic interference

Electromagnetic interference (EMI) shielding materials play a vital role in human society, especially in light of the rapid development of electronic communication equipment. Therefore, it is urgent to develop green, high-efficiency EMI shielding materials. Wood, as a renewable raw material, possesses significant structural advantages in studying EMI materials due to its unique 3D pore structure. Herein, we report magnetoelectric lignocellulosic matrix composites derived from the delignified wood for efficient EMI shielding. The composite was fabricated by in-situ polymerization of PEDOT conductive coating and magnetic Fe3O4 in delignified wood. The conductive 3D pore structure of Fe3O4/PEDOT@wood could effectively cause dielectric loss and multiple internal reflections. Combined with the magnetic loss of Fe3O4, the material exhibited excellent EMI shielding effectiveness (SE), which could be attributed to the synergistic effect of dielectric and magnetic losses. The Fe3O4/PEDOT@wood showed excellent conductivity (103 S/m), good magnetism (26.7 emu/g), the EMI SE up to 59.8 dB, and high SEA/SET ratios of∼84.2 % to 95.7 % at 2 mm in X -band. Moreover, the material exhibited a high compressive strength and tensile strength of 100.8 MPa and 18.1 MPa, respectively. Therefore, this work provided a reference for the preparation of high-efficiency EMI shielding materials.

Soil Biopores and Non-Biopores Responses to Different Tillage Treatments in Sugarcane Fields in Guangxi, China

Different types of soil macropores respond differently to various tillage practices, owing to disparities in origin, scale, morphology, and function, consequently exerting distinct effects on soil structure. This study aimed to investigate the response mechanisms of three different soil pore types (total macropores, non-biopores, and biopores) to two distinct tillage practices: smash-ridging tillage (T) and no-tillage (NT) in sugarcane fields. The parameters characterizing soil pore treatments in two and three dimensions were obtained using X-ray computed tomography scanning technology. ImageJ and MATLAB software were employed to analyze the data and separate soil macropores into biopores and non-biopores categories. The results showed that non-biopores predominated in two-dimensional cross-sectional areas in NT treatment, whereas biopores were more dominant in T treatment. Biopores in T treatment had a higher proportion of two-dimensional pores compared to NT treatment. A three-dimensional analysis indicated that total macropores had larger mean diameters (MD) and macroporosity, with more continuous tubular pores in T treatment than that in NT treatment. However, NT treatment had more numerous non-biopores with broader spatial distribution and complex morphology. Additionally, biopores in T treatment had larger MD and branching length density (LD). These vertically developed biopores, along with high macropore connectivity and under smash-ridging tillage, could improve soil water and pore conductivity. Therefore, smash-ridging tillage was more beneficial for sugarcane growth compared to no-tillage in Guangxi of China.

Electrochemical chiral sensor for recognition of amino acid enantiomers with cyclodextrin-based microporous organic networks

BackgroundChirality is a ubiquitous phenomenon in nature, but enantiomers exhibit different pharmacological activities and toxicological effects. Therefore, Chiral recognition plays a pivotal role in various fields such as life sciences, chemical synthesis, drug development, and materials science. The synthesis of novel chiral composites with well-defined loading capabilities and ordered structures holds significant potential for electrochemical chiral recognition applications. However, the design of selective and stable electrochemical chiral recognition materials remains a challenging task. ResultIn this work, we construct a simple and rapid electrochemical sensing platform for tryptophan (Trp) enantiomer recognition using cyclodextrin-modified microporous organic network as chiral recognition agent. CD-MON with chiral microenvironment was prepared by Sonogashira-Hagihara coupling reaction of the chiral molecule heptyl-6-iodo-6-deoxyβ-cyclodextrin and 1, 4-Diethynylbenzene. The adhesion of BSA makes CD-MON firmly fixed on the electrode surface, and as a chiral protein, it can improve the chiral recognition ability through synergistic effect. Chiral amino acids are in full contact with the chiral microenvironment during pore conduction of MON, and L-Trp is more stably bound to CD-MON/BSA due to steric hindrance, host-guest recognition and hydrogen bonding. Therefore, the electrochemical sensor can effectively identify tryptophan enantiomers (IL-Trp/ID-Trp = 2.02), and it exhibits a detection limit of 2.6 μM for L-Trp. UV–Vis spectroscopy confirmed the adsorption capacity of CD-MON towards tryptophan enantiomers in agreement with electrochemistry results. SignificanceThe prepared chiral sensor has excellent stability, reproducibility (RSD = 3.7%) and selectivity, realizes the quantitative detection of single isomer in tryptophan racemic and quantitative analysis in real samples with 94.0%–101.0% recovery. This work represents the first application of MON in chiral electrochemistry which expands the application scope of chiral sensors and holds great significance in separation science and electrochemical sensing.

Dynamic molecular portraits of ion-conducting pores characterize functional states of TRPV channels

Structural biology is solving an ever-increasing number of snapshots of ion channel conformational ensembles. Deciphering ion channel mechanisms, however, requires understanding the ensemble dynamics beyond the static structures. Here, we present a molecular modeling-based approach characterizing the ion channel structural intermediates, or their “dynamic molecular portraits”, by assessing water and ion conductivity along with the detailed evaluation of pore hydrophobicity and residue packing. We illustrate the power of this approach by analyzing structures of few vanilloid-subfamily transient receptor potential (TRPV) channels. Based on the pore architecture, there are three major states that are common for TRPVs, which we call α-closed, π-closed, and π-open. We show that the pore hydrophobicity and residue packing for the open state is most favorable for the pore conductance. On the contrary, the α-closed state is the most hydrophobic and always non-conducting. Our approach can also be used for structural and functional classification of ion channels.

Pore size, conductivity and surface area effects of rGO/ZnO/PTh hybrid nanocomposite for supercapacitors

This paper presents an easy and low-cost synthesis of reduced graphene oxide (rGO) and Zinc oxide (ZnO) as binary nanocomposite (rGO/ZnO) and rGO, ZnO and polythiophene (PTh) as ternary hybrid nanocomposite (rGO/ZnO/PTh). Firstly, graphene oxide (GO) was synthesized from modified Hummers method. And it was reduced by microwave-assisted method to form as reduced graphene oxide (rGO). Polythiophene (PTh) was chemically synthesized to comparison with nanocomposites. Secondly, binary nanocomposite of rGO/ZnO were synthesized by probe-sonication method. Thirdly, rGO/ZnO/PTh hybrid nanocomposite was chemically synthesized using FeCl3 as an oxidant. All these materials were examined by many different techniques, such as FTIR-ATR, SEM-EDX, TGA-DTA, BET, Four-point probe analysis, cyclic voltammetry (CV), galvanostatic charge-discharge (GCD), and electrochemical impedance spectroscopy (EIS) analysis. The average pore width, conductivity and specific capacitance values were comparatively investigated to understand these effects on electrochemical performances of supercapacitor devices.The highest specific capacitance (Csp) was obtained as Csp = 430 F/g for rGO/ZnO nanocomposite at a scan rate of 2 mV/s. Moreover, it also shows a good charge/discharge performance (up to 1000 cycles) with 98.43 % capacitance retention at a scan rate of 100 mV/s by CV method. However, GCD and EIS methods have showed the highest specific capacitances as Csp = 85.6 F/g at 10 A/g, and Csp = 25.8 F/g for both hybrid rGO/ZnO/PTh nanocomposites, respectively. In addition, a new equivalent circuit model [R1(C1(Rct(C2R2)))] was suggested to interpret the EIS data for supercapacitor devices. As a results, both binary and ternary nanocomposites may be recognized as electrode materials with three different methods (CV, GCD and EIS) in supercapacitor applications.

Utilizing Activated Carbon Nanopores for Electrochemical Oxidation of Perylene to Redox-Active 3,10-Perylenedione: Application in Electrochemical Capacitor Electrodes.

We demonstrate that nanopores of activated carbon (AC) function as nanoreactors that oxidize perylene (PER) to a redox-active organic compound, 3,10-perylenedione (PERD), without any metal catalysts or organic solvents. PER is first adsorbed on AC in the gas phase, and the PER-adsorbed AC is subjected to electrochemical oxidation in aqueous H2SO4 as the electrolyte. Because gas-phase adsorption is solvent-free, PER is completely adsorbed on AC as long as the amount of PER does not exceed the saturated adsorption capacity of the AC, which enables accurate control of the amount adsorbed. PER is electrochemically oxidized to PERD in the nanopores of AC at above 0.7 V vs Ag/AgCl. The hybridized PERD undergoes a rapid reversible two-electron redox reaction in the nanopores owing to the large contact interface between the conductive carbon pore surfaces and PERD. The resulting AC/PERD hybrids serve as electrodes for electrochemical capacitors, utilizing the rapid redox reaction of PERD. The hybridization method is advantageous for quantitatively optimizing electrochemical capacitor performance by adjusting the amount of adsorbed PER. Moreover, because PERD hybridization in the AC nanopores does not expand the electrode volume, the volumetric capacitance increases with increasing hybridized PERD content. In three-electrode cell measurements, the volumetric capacitance at 0.05 A g-1 reaches 299 F cm-3, and 61% of this capacitance is retained at 10 A g-1 when 5 mmol of PER is used per gram of AC. Meanwhile, pristine AC delivers 117 F cm-3 at 0.05 A g-1 with a capacitance retention of 46% at 10 A g-1. Two-electrode cell measurements reveal that self-discharge is significantly suppressed by the hybridized PERD when AC/PERD hybrids and AC are used as cathodes and anodes, respectively, compared to that of a symmetrical AC cell. Moreover, PERD does not undergo cross-diffusion in the asymmetrical cells during self-discharge tests for 24 h.

Achieving Long Cycle Life of Zn-Ion Batteries through Three-Dimensional Copper Foam.

Metallic zinc anodes in aqueous zinc-ion batteries (ZIBs) suffer from dendritic growth, low Coulombic efficiency, and high polarization during cycling. To mitigate these challenges, current collectors based on three-dimensional (3D) commercial copper foam (CCuF) are generally preferred. However, their utilization is constrained by their thickness, low electroactive surface area, and increased manufacturing expenses. In this study, the synthesis of cost-effective current collectors with exceptionally large surface areas designed for ZIBs that can be cycled hundreds of times is reported. A zinc-coated CuF anode (Zn/CuF) was prepared with a 3D porous CuF current collector produced by the dynamic hydrogen bubble template (DHBT) method. Electrochemically generated copper foam could be obtained within seconds while offering a thickness as low as 30-40 μm (CuF5 achieved a thickness of ∼38 μm in 5 s) via the DHBT method. The excellent electrical conductivity and open pore structure of the 3D porous copper scaffold ensured the uniform deposition/stripping of Zn during cycling. During the 500 h Zn deposition/stripping process, the as-synthesized CuF5 current collector offered fast electrochemical kinetics and low polarization as well as a relatively high average Coulombic efficiency of 99% (at a current density of 5 mA cm-2 and a capacity of 1 mAh cm-2). Furthermore, the symmetric cell exhibited low voltage polarization and a stable voltage profile for 1000 h at a current density of 0.1 mA cm-2. In addition, full cells containing the Zn/CuF anode coupled with an as-synthesized α-MnO2 nanoneedle cathode in aqueous electrolyte were also prepared. Capacities of 266 mAh g-1 at 0.1 A g-1 and 94 mAh g-1 at 2 A g-1 were achieved after 200 charge/discharge cycles with a stable Coulombic efficiency value close to 99.9%.

High-performance electrosorption of lanthanum ion by Mn3O4-loaded phosphorus-doped porous carbon electrodes via capacitive deionization

Transition-metal-oxide@heteroatom doped porous carbon composites have attracted considerable research interest because of their large theoretical adsorption capacity, excellent electrical conductivity and well-developed pore structure. Herein, Mn3O4-loaded phosphorus-doped porous carbon composites (Mn3O4@PC-900) were designed and fabricated for the electrosorption of La3+ in aqueous solutions. Due to the synergistic effect between Mn3O4 and PC-900, and the active sites provided by Mn–O–Mn, C/PO, C–P–O and Mn–OH, Mn3O4@PC-900 exhibits high electrosorption performance. The electrosorption value of Mn3O4@PC-900 was 45.34% higher than that of PC-900, reaching 93.02 mg g−1. Moreover, the adsorption selectivity reached 87.93% and 89.27% in La3+/Ca2+ and La3+/Na+ coexistence system, respectively. After 15 adsorption-desorption cycles, its adsorption capacity and retention rate were 50.34 mg g−1 and 54.12%, respectively. The electrosorption process is that La3+ first accesses the pores of Mn3O4@PC-900 to generate an electric double layer (EDL), and then undergoes further Faradaic reaction with Mn3O4 and phosphorus-containing functional groups through intercalation, surface adsorption and complexation. This work is hoped to offer a new idea for exploring transition-metal-oxide @ heteroatom doped porous carbon composites for separation and recovery of rare earth elements (REEs) by capacitive deionization.