Concrete Tanks Research Articles

The Growth Performance, Haematological Parameters and Serum Biochemistry of the Flathead Grey Mullet Mugil cephalus Under Recirculating Aquaculture System and Traditional Culture Systems.

The present investigation explored the growth performance, haematological parameters and serum biochemistry of flathead grey mullet under recirculating aquaculture system (RAS) and traditional culture systems. Nine hundred healthy fish, weighing 43.80 ± 3.55 g and length 16.54 ± 0.82 cm were randomly distributed to three treatments of RAS and traditional culture systems (T1: 20% of water changed daily; T2: once-through system 250 L/h; T3: RAS-20% of water changed weekly) in nine concrete tanks of 4000 L at stocking density of 100 fish/tank and each treatment had three replicates. Fish were fed (33.1% crude protein, 3 mm pellets) twice a day at a rate of 3% for 12 weeks. These findings suggest that the T3 followed by T2 led to notable improvements in growth performance compared to other culture systems. Significantly elevated values of weight gain, length gain, specific growth rate, average daily gain and survival % were observed in T3. The RBCs exhibited a significant decrease under T2. Haemoglobin concentrations and WBC counts significantly increased under RAS. Significant values of mean cell haemoglobin and mean cell haemoglobin concentration were recorded in T2. Total protein, albumin and globulin enhanced significantly under RAS, whereas the highest values of cortisol were observed in T2 and T3. These findings demonstrate that the RAS followed by once-through system significantly improve growth performance, feed efficiency and survival, as well as enhancing the haematology and serum biochemical status of flathead grey mullet. In conclusion, RAS provides ideal conditions for optimizing physiological functions, growth performance and fish health.

Dynamic Behavior of Rectangular Tanks with Limited Freeboard Under Seismic Loads: Experimental, Analytical and Machine Learning Investigations

Abstract One of the most common types of fluid storage tanks are rectangular concrete tanks placed on the ground. Ensuring the seismic performance of these tanks is crucial as, besides damage and losses during a crisis, they can lead to other crises such as fires or toxic material leaks. One pivotal factor influencing the seismic behavior of these tanks is the height of the freeboard. A comprehensive understanding of how freeboard height impacts the impulsive and convective masses is essential for the effective design and dynamic analysis of rectangular tanks. While numerous numerical and experimental studies have explored this field, the influence of various filling levels, fluid properties, and tank geometries under seismic loading conditions requires further investigation. In this study, both an experimental model and a theoretical model were subjected to different tank fill levels, tank geometries, and various freeboard heights under the influence of different earthquake records. The results showed that tank height and geometry significantly affect the changes in impulsive and convective masses. Notably, in contrast to previous studies, our results demonstrate a nonlinear relationship between freeboard height and the variations in these masses. These new findings are crucial for refining current design practices and improving the resilience of rectangular tanks in earthquake-prone regions.

Characterization of the myostatin gene in the neotropical species Piaractus mesopotamicus and the possibility of its use in genetic improvement programs.

The myostatin gene has played an important role in the genetic improvement of the main species of economic importance; however, it has not yet been described for some Neotropical fish essential for aquaculture. This study aimed to characterize the myostatin gene of pacu, Piaractus mesopotamicus, and investigate the association of a microsatellite marker in this gene with the weight of fish. The myostatin gene sequence was obtained after following a RACE-PCR strategy based on a partial mRNA sequence available in the GenBank database and the alignment of myostatin sequences from other fish species. The obtained sequence for the P. mesopotamicus gene was analyzed for short tandem repeats, and one dinucleotide was observed at the 3´untranslated region. A short tandem repeat polymorphism was verified in a wild population. Subsequently, the STR was evaluated in a test population of 232 animals in two 220m² concrete tanks at the Aquaculture Center of Unesp. Eight alleles and 22 genotype combinations were identified. A significant association was observed between microsatellite marker polymorphisms and the weight traits (WEIGHT1 and WEIGHT2). Alleles 210, 222, 226, and 230 were found to favor weight gain. In summary, this study contributes to the characterization of the myostatin gene in pacu fish and identifies an association between a STR and weight traits. Thus, this gene could be used as a target for genetic breeding using molecular strategies such as CRISPR and quantitative strategies such as marker-assisted selection, which would contribute to improving the production of the species.

Research on adaptive hydraulic drive optimization control of concrete mixing tank truck for open-pit mine.

The non-axisymmetric problem caused by the fluid sloshing in the tank of a mining concrete mixing tank truck during driving is affected by the excitation of complex road surfaces. The fluid sloshing is coupled with the dynamics of the vehicle body due to the excitation of the complex road surface. The traditional hydraulic drive proportional integral differential (PID) control method is not effective in dealing with such problems, which can easily lead to accidents such as overturning. To improve the accuracy and stability of the hydraulic drive control system, this paper proposes an optimized particle filter PID adaptive control method based on the elastic firefly (FA) algorithm to accelerate the convergence speed of control parameter optimization, and then analyzes its hydraulic drive control characteristics and structural applications, and discusses step steering and double lane change modes are simulated under filling rates of 1.5 and 2.0, respectively. The experimental results show that compared with traditional PID control, the proposed adaptive control method can significantly reduce the average speed error of hydraulic drive control to 0.03km/h and the maximum speed error to 0.17km/h. It also improves the control tracking performance and stability. The practicality of the adaptive hydraulic drive is verified in the filling rate experiments under step steering and double-lane shifting conditions. It has important reference value for the practical application of hydraulic drive control optimization of mining concrete mixing transport tank trucks.

Effect of Vermicompost Supplement on Rainbow Trout Performance

Vermicompost is the product of organic waste digestion by earthworms besides aerobic decomposition at ambient temperature. It is a rich composition containing plant nutrients and beneficial microorganisms. Some fishes, especially predatory species such as rainbow trout, need nutritive feed so that they can be healthy; a useful and cheaper additive such as vermicompost can supply this aim. In this study, the effect of different percentages of vermicompost in the diet of rainbow trout was investigated. For this purpose, 100 rainbow trout with an average weight of 120±3 g were distributed in 5 groups in concrete tanks. Their nutrition and physical and chemical water parameters were determined according to the standard. Vermicompost with confirmable analysis was added to their daily feed (2, 4, 6, and 10%). After 2 months, the feed conversion ratio and survival rate were examined. The results showed that there was a significant relationship between the performance of the control group and the treatment groups (p

Influence characteristic and improvement mechanism of thermal storage performance of Packed-bed thermocline tank based on high-temperature molten salt

Chloride salts and carbonates thermal energy storage (TES) have great application potential in high-temperature concentrated solar power (CSP) plants. However, their thermal storage characteristics, performance improvement mechanism and economic feasibility of application in high-temperature conditions are not clear. In this study, a transient, two-dimensional and axisymmetric model is developed for packed-bed thermocline tanks. The effects of six commonly solid fillers on thermal storage performance of NaCl-KCl-MgCl2 salt and Na2CO3-K2CO3-Li2CO3 salt at an operation temperature of 450–800 °C are simulated. The suggestions for optimizing fillers are provided combined with thermal and economic performance. Results show that high volume heat capacity and low thermal conductivity of fillers play important roles in deferring migration and weakening diffusion of thermocline, thus promoting thermal storage capacity and efficiency of tanks. Concrete and cast iron are suitable fillers for chloride salts and carbonates TES. The concrete tank is suitable for systems with strict cost control and low TES requirements. The iron tank is suitable for systems with high TES and low cost control requirements, which significantly increases effective thermal storage capacity of chloride salts by 222.1 % and considerably reduces TES cost of carbonates by 41.1 %. The results can be beneficial for high-temperature TES system of CSP plants.

Enhancing the stability of a red organic wine through hydroxytyrosol supplementation at bottling: A time-dependent analysis

The effect of the addition of hydroxytyrosol (HT) in a red organic wine (Sangiovese 85 % and Cabernet Sauvignon 15 %) was evaluated. After six months of storage in a concrete tank, the wines were spiked with HT in three different amounts (30, 60, 120 mg/750 mL in wine) and compared with a control bottled wine (no HT addition). The bottled wines were stored at room temperature and were opened after a period of one, three, six, nine and twelve months to perform chemical and sensory analyses (T1, T3, T6, T9, and T12, respectively). Storage time was the factor that most influenced all wines parameters with respect to the different treatments. However, wine added with 60 and 120 mg/750 mL HT had a lower amount of acetic acid than the control at T3 and T6. At T6, the measured HT was negatively correlated with acetic acid (R2 = 0.81), thus suggesting that HT preserved the wine from oxidation. Later, this trend was not confirmed. The content of HT spiked was stable over twelve months of bottle storage; only the endogenous HT, which is naturally present in wine, showed a decrease of 44 % after twelve months of bottle storage. Yellowness (b*) was higher in the 30 mg/750 mL at T9 compared to the other samples. Lightness (L*) showed a decrement of 11 %, while a* (redness) increased by 21 % from T1 to T12. After T6, the wine fortified with 120 mg/750 mL was preferred by the sensory panel; however, it was the only sample to be clustered by the panel at T9 and "red fruits," "spicy", and "astringency" sensory attributes played an important role in this separation.

Zootechnical Factors Affecting the Biosecurity Profile of Fish Farms in the Centre Region of Cameroon

In order to optimize the fish production by a better knowledge of preventive measures against fish diseases, a cross-sectional audit was carried out in Cameroon from March to April 2022 on the zootechnical factors affecting the biosecurity practice in fish farms from the Centre Region (3°55'- 4°67'N; 9°46-11°52'E). A total of 50 farms were selected using the "snowball" method, face-to-face interview of fish farmers using a semi-structured questionnaire and direct observation. The most practiced farming system was the semi-intensive production system (74%), non-integrated fish farming (100%), grow-out (66%), monoculture (54%), and the soil system (34% of farms with ponds). The compliance rate (40.98%) and adoption rate (41.00%) of biosecurity measures (BM) was intermediate. The most adopted BM were "sanitary lock" and "no exchange of materials with other farms", while the least adopted were "veterinary intervention", "dead fish incinerated" and "special outfit for visitors". The BM were significantly more observed in intensive, nursery farms and those whose culture facilities were fastanks + concrete tanks with 3 to 12 production cycles per year. A strong, positive and significant linear relationship was established between the compliance rate (y) and BM such as the protection of farms from wild animals, quarantine of new fish, number of production cycles per year (x). The linear regression model between y and x was y = 4.65x - 0.0417. The capacity of fish farmers should be built on biosecurity practices. Key words: Biosecurity practice, diseases, mortality, fish, Cameroon

Establishing a Remote Area Network for an Automation System: A Case Study of Yeni Karpuzlu Drinking Water Automation

Yeni Karpuzlu is a town located in the Ipsala district of Edirne province. The drinking water needs of this town are supplied from a deep water well. Water is pumped from the deep well using a submersible pump and sent to a 500-m 3 capacity concrete water tank. Here, the water goes the town's water demand through natural flow. The water is then sent from the tank, which is located 30 meters above ground level, to the town. There is a distance of 800 meters between the well and the tank, and 6000 meters between the tank and the control center located in the town. A local network has been established using outdoor access points for communication between the industrial control devices located at these three points. Data from the instruments are collected at a speed of 300mbps. Additionally, it is sent to the video center via IP cameras for area security. All devices on this network communicate with each other and are controlled. This paper will discuss the operation of the automation system mentioned above. Operations include the pump operation based on tank levels, pressure control using an adjustable valve to maintain network pressure, and monitoring and control operations from the central unit.

Structural Problems Occurring in Reinforced Concrete Drinking Water Tanks and Water Loss Prevention Methods

Water losses occur over time due to structural deformation in buried reinforced concrete tanks built to meet the drinking water needs in living spaces. It is clear that drinking water tanks must be strengthened and waterproofed to prevent tons of water loss every year. A water-repellent coating on the concrete surface of water tanks prevents water loss as well as effectively protecting the concrete and increasing its durability. Waterproofing not only provides protection, but also prolong one's life of the building. The key to success in waterproofing all engineering structures is the proper and appropriate application of the right waterproofing materials. The aim of this study is to prevent water losses due to structural problems that occur over time in four recessed rectangular prismatic reinforced concrete clean water tanks in four different locations in a province in Turkey, to extend the life of the facility and most importantly to provide cleaner potable water to human life. Water and Sewerage Administration started maintenance, repair and waterproofing works of 15,000 m3 water tanks in the city center in 2021-2022. This article, academic articles, previous practices have been researched and it is hoped to be a solution to the problems. Considering the causes of water loss in the existing water reservoir, it is hoped that it will be a guide for the construction of a new water reservoir.

Prediction of reproductive performance in wintering females of Siberian sturgeon (Acipenser baerii, Brandt) based on in vitro ovulation rate of isolated follicles

Early prediction of the reproductive success of sturgeon females is important both for artificial breeding conditions in sturgeon farms and for monitoring wild fish populations approaching spawning. This study demonstrated that ovarian follicles removed from wintering Acipenser baerii females can undergo in vitro ovulation when exposed to 17α,20β-dihydroxy-4-pregnen-3-one. The research was conducted from 2015 to 2021 and involved the examination of 110 wintering Siberian sturgeon females (A. baerii), with an average weight of 8–11 kg and an age range of 8–10 years. Selection of females for spawning was based on the polarization index (PI) at the time when the river temperature dropped to +8 °C. The selected females were overwintered in concrete flow-through tanks with water from the Volga River for approximately two months. At the end of this period, oocyte samples were collected for in vitro incubation. An increase in water temperature to 15 °C, which precedes spawning, was achieved by mixing with warm effluent from a regional power station. The reproductive success of females was evaluated based on fertilization and embryonic survival rates. High reproductive success was characterized by females with fertilization rates above 70% and hatching rates above 60%. We identified a positive correlation between the percentage of in vitro ovulated follicles and the in vivo fertilization and embryo survival rates, with correlation coefficients of Rsp = 0.60 and Rsp = 0.48, respectively. Statistical analysis showed that females whose in vitro ovulation rate of follicles exceeded 30% displayed high reproductive performance compared to those with an in vitro ovulation rate below 30%. The predictive accuracy of this criterion was determined by calculating the ratio of ranks between females with high and low reproductive performance, averaging 80.9% for fertilization and 77% for embryonic survival. Therefore, we propose a new criterion to select females of A. baerii for spawning based on the in vitro oocyte ovulation rate obtained from wintering individuals.

Seismic Strengthening of Elevated Reinforced Concrete Tanks: Analytical Framework and Validation Techniques

The prevalence of elevated reinforced concrete tanks is widespread across Italian water distribution networks, particularly in flat or low-relief areas. Primarily constructed by the late 1970s, these tanks often suffer from outdated hydraulic efficiency, unable to cope with the increasing urban water demands. With rising construction costs, the economic advantage has shifted toward underground tanks, leading to the decommissioning of many elevated tanks. Despite being obsolete, elevated tanks from the 1960s and 1970s still stand in densely urbanized regions. However, demolishing them may prove less cost-effective than retrofitting to restore their original structural capacity. The widespread presence of these structures, coupled with their susceptibility to decay from weathering and poor maintenance, necessitates a comprehensive assessment of their resilience against gravitational and lateral forces, including seismic activity. Consequently, there is a pressing need to develop an analysis and verification methodology, particularly focused on seismic resilience, tailored to existing elevated tanks. These structures, distinct from conventional reinforced concrete frames, are primarily designed to withstand vertical forces, emphasizing the importance of optimizing material usage in their retrofitting efforts.

The Effect of Nonlinear Sloshing Response of Water on Seismic Behavior of Reinforced Concrete Elevated Water Tanks

In this study, the fluid-structure interactive behavior by using the Westergaard approach and the Smoothed Particle Hydrodynamics (SPH) method of a 1000 m3 reinforced concrete (RC) elevated water tank under different seismic activities i.e., Kocaeli, Van, Kahramanmaraş and Kobe earthquakes was investigated. In the SPH method, the resulting hydrodynamic pressures were applied to the interior of the wall of the structure as an external force which is made as mass additions to the tank walls in Westergaard approach. With the help of software developed, the load carrying system of the elevated water tank was modeled using the MATLAB Partial Differential Equation Toolbox (PDE) software, based on the finite element method, and its verification was made by comparing with ANSYS software model. Dynamic condensation method was used to perform time history analyses for the cited earthquakes. The time-dependent solutions of partial differential equations are solved with the help of ODE45 functions based on Runge-Kutta method, by arranging the equation of motion in state-space format. The cited tank was analyzed linearly under different seismic activities for empty, half-filled (50%) and full-filled (100%) cases and the obtained results were compared with each other. It has been concluded that considering nonlinear behavior of the fluid during the earthquake with the SPH method provided consistency with the real behavior of RC elevated water tanks and gave more realistic results than the traditional Westergaard approach.

Life cycle assessment for the land application of food processing wash-water and solid residuals.

A life cycle assessment (LCA) study was completed to understand the environmental impacts associated with the land application of wastes produced from rural food-processing operations for final disposal. The system boundaries for the two comprised scenarios included the storage of the produced non-agriculture source material (NASM), transportation to an applicable location, land application of the NASM, and the impacts of the final emissions to the soil and groundwater for a full year. The Tool for the Reduction and Assessment of Chemicals and Other Environmental Impacts (TRACI) v2.1 was selected as the impact assessment method. Furthermore, SimaPro 8.0.4.26 was the LCA model version that was used with all the databases included. Overall, the LCA study showed that the most significant environmental impacts associated with the disposal process resulted from carcinogenic and eutrophication emissions. The component that contributed the most to carcinogenic impacts was found to be from the material required to create the concrete storage tank. Additionally, eutrophication was identified to be a potential significant impact, if proper setback requirements are not followed for the NASM material. Results of the study look to inform stakeholders about the benefits and risks encountered from NASM disposal. PRACTITIONER POINTS: Life cycle assessment was completed on a representative NASM disposal system using land application. Concrete tank used for storage of NASM had the most significant impact in carcinogenic emissions. Eutrophication impacts were the second most significant impact behind carcinogenic emissions.

Reversing the detrimental effects of high stocking density in Oreochromis niloticus juveniles using coenzyme Q10 and l-carnitine dietary supplementation

A 14-week trial was undertaken to examine the effects of coenzyme Q10 (CQ10) and l-carnitine (LC) dietary supplementation, either individually or in combination, on the feed intake, growth, blood biochemistry, immunity, economic viability, and body composition of Nile tilapia fingerlings reared at a high stocking density. The study involved eight groups of 450 tilapia juveniles, with an average weight of 6.083 ± 0.09 g, assigned to different treatments. Two groups were fed a basal diet and stocked at densities of 30 and 60 fish per m3, respectively. The remaining groups were reared at a high stocking density of 60 fish/ m3 and fed diets fortified with LC at 150 mg (G3), LC at 300 mg (G4), CQ10 at 20 mg (G5), CQ10 at 40 mg (G6), LC at 150 mg + CQ10 at 20 mg (G7), or LC at 300 mg + CQ10 at 40 mg (G8) per kg of diet. The findings revealed that high stocking density had an adverse impact on tilapia growth performance. Nevertheless, the inclusion of LC and CQ10 in the diet, whether separately or in combination, significantly improved growth parameters and enhanced survival rates. The G6, G7, and G8 groups showed the most significant improvements in growth and survival. High stocking density resulted in decreased moisture and crude protein content, while LC and CQ10 supplementation increased these components and reduced crude fat and ash content. High stocking density negatively impacted blood metabolites, leading to elevated levels of aspartate aminotransferase, alanine aminotransferase, creatinine, and urea-N, as well as decreased total protein and albumin. However, supplementation with LC and CQ10 effectively alleviated these effects, improving the levels of these parameters. All supplemented groups showed enhanced lysozyme activity and IgM concentration, with the greatest improvements observed in the G6, G7, and G8 groups. Economic analysis indicated that LC and CQ10 supplementation improved final and relative margin, except in the G4 group. In conclusion, the combined supplementation of LC and CQ10 shows promise in enhancing productivity and profitability in tilapia farming under high stocking density conditions, particularly in concrete tanks.

Effects of dietary supplementation with benthic diatom Amphora coffeaeformis on blood biochemistry, steroid hormone levels and seed production efficiency of Nile tilapia Oreochromis niloticus broodstock.

Aquafeed additive quality and quantity remain pivotal factors that constrain the sustainability and progress of aquaculture feed development. This study investigates the impact of incorporating the benthic diatom Amphora coffeaeformis into the diet of Nile tilapia (Oreochromis niloticus) broodstock, on the blood biochemistry, steroid hormone (SH) levels and seed production efficiency. Broodstock females displaying mature ovary indications were initially combined with males at a ratio of three females to one male. A total of 384 adult Nile tilapia (288 females and 96 males) were used, with 32 fish (24 females and eight males) assigned to each of 12 concrete tanks (8 m³; 2 m × 4 m × 1 m), with three replicate tanks for each dietary treatment, throughout a 14-day spawning cycle until egg harvest. Fish were fed one of four different dietary treatments: AM0% (control diet), and AM2%, AM4% and AM6% enriched with the diatom A. coffeaeformis at levels of 20, 40 and 60 g/kg of diet respectively. At the trial's conclusion, total protein, albumin, triglyceride and creatinine), SHs (follicle-stimulating hormone, luteinizing hormone, free testosterone, total testosterone, progesterone and prolactin) and seeds production efficiency of Nile tilapia improved significantly (p < 0.05) in alignment with the increment of A. coffeaeformis supplementation. The findings propose that including A. coffeaeformis at levels ranging from 4% to 6% could be effectively employed as a feed additive during the Nile tilapia broodstock's spawning season.

Egg Quality and Fecundity of Clarias gariepinus Broodstock Cultured at Different Water Depths in Indoor Concrete Tanks

Aims: To investigate the fecundity and egg quality of C. gariepinus broodstock raised at 0.50 m, 0.75 m and 1.0 m pond water depth. Study Design: Treatments were assigned using complete randomized design. Place and Duration of Study: Fish Farm Complex of the Akwa Ibom State University (AKSU), Nigeria. Methodology: Nine female broodstock of C. gariepinus averaging 2.51 – 2.53 kg and 64.30 – 67.24 cm were raised for six months at 0.50 m, 0.75 m and 1.0 m pond water depth; referred to as treatments A, B and C, respectively Experimental fish were fed 42% crude protein commercial feed. The fecundity, relative fecundity, gonadosomatic index (GSI), egg weight and size were assessed. Results: The results revealed that the egg quality significantly (P=.00) increased with the water depth of the broodstock culture tank. Egg weight and GSI values from treatment C (363.40±0.57 g and 14.40±0.01 %, respectively) were significantly (P = .007) higher than those of treatment A (267.30±0.06 g and 10.66± 0.06 %, respectively) but showed no significant difference with those of Treatment B (331.07±1.20; 13.09±0.04 %). The corresponding egg diameter (1.01±00; 1.08±0.03 and 1.21± 0.01g), fecundity and relative fecundity of broodstock also increased with pond water depth (P = .003): 182,120.0±503.67, 72.66±0.40 &gt; 185,618.3± 745.98, 73.37±0.18 &gt; 188, 967.1± 295.19, 74.89±0.18, respectively. Conclusion: The water depth of the broodstock maintenance pond enhances fecundity and egg quality; it is better at 1.0 m depth for successful fry production. Broodstock may be maintained at lower pond water depths for growth purposes; prior to breeding.

Assessment of the Proximate and Mineral Compositions of Moringa Oleifera Leaf Extracts, the Carcass and Eggs of African Clariid Catfish, Heterobranchus bidorsalis

The need to optimize feed efficiency, feed digestibility and improve metabolism, growth, and reproductive performance of fish has necessitated the use of phytogenic feed additives in aquaculture. A Study was carried out to assess the Proximate and mineral compositions of aqueous and ethanolic Moringa oleifera leave extracts (AMOLE and EMOLE respectively) according to standard procedures. Consequently, these two extracts were used to formulate test diets containing 0.00/100g (control), 1.0g/100g, 2.0g/100g and 3.0g/100g inclusion levels. H. bidorsalis samples (n=216; 800.00+150.00g; 37.50±1.5cm) were randomly distributed in triplicate into 24 concrete tanks of size 6m x 4m x1.3m in a completely randomized 2x4 factorial design and fed at 5% body weight twice daily for 16 weeks. The proximate and mineral compositions of the diets was determined while the carcass and the eggs nutrients compositions were subsequently assessed. The proximate composition of the eggs were significantly higher in crude protein contents than the CP in the MOLE (34.14±0.05), AMOLE (38.84±0.17) and EMOLE (38.44±0.07) diets and the Carcass (37.46±0.28) with range (72.32±0.41 (control) - 78.78±0.58 % (3.0/100g)) while the ash (1.44±0.10 (3g/100g - 2.41±0.10% (control)) and ether (2.88±0.09 (3.0/100g) - 3.25±0.9% (control) ) contents where significantly lower than the highest contents of ash (20.01±0.27%) recorded in fish fed 2.0/100g AMOLE diet and (7.94±0.05%) ether recorded in the control diet. Aqueous extraction method had the highest significant (P&lt;0.05) retention of mineral concentrations: Ca (21.04), P (14.89), Mg (16.40), Na (23.33), K (65.57), Fe (10.67), Cu (6.48) and Zn (5.55) compare to ethanolic extraction method: Ca (2.87), P (12.65), Mg (7.65), Na (19.24), K (13.76), Fe (9.07), Cu (2.40) and Zn (2.32). For the carcass, only Manganese, Iron and Copper compositions were significant (P&lt;0.05) among all treatment groups and the control. These findings have far reaching nutritional importance in the healthcare system and will help to address undernutrition in fish broodstock management in a cost effective manner. Thus, the use of M. oleifera leaves extracts as phytogenic feed additives and nutrients booster should be encouraged and sustained towards sustainable aquaculture development.

The response characteristics and damage effects of large LNG storage tanks subject to the coupled effects of explosion shock waves and fire

As the demand and import of liquefied natural gas (LNG) increase, large LNG receiving stations are being constructed. LNG leakage can lead to fire or explosion accidents. The simultaneous occurrence of explosions and fires, often inevitable, is more damaging than the effect of a single load. This study utilizes finite element analysis software LS-DYNA and the ALE algorithm to examine the response characteristics and damage effects on large LNG storage tanks under the combined impact of explosion shock waves and high-temperature loads (with the explosion preceding the fire). The findings indicate that post-explosion, the concrete outer tank's compressive strength diminishes as temperatures rise. The dome deflection of the storage tank's external tank surpasses the standard limit at 400 °C and fails at 600 °C. This research identifies the critical failure mode of the concrete storage tank's outer tank under the joint impact of explosion shock waves and fire. It provides a foundation for the anti-explosion design of such storage tanks.

Experimental Study on Mechanical Properties of Reinforcement under Low-Temperature Impact

Abstract Ammonia is an important carrier of hydrogen energy, and the large-scale storage of liquid ammonia is the next trend of cryogenic energy storage. At present, the international mainstream liquid ammonia tank is generally about 50, 000 m3. The outer storage tanks generally adopt a metal structure, and the material applied for larger concrete full-capacity tanks is worth doing further research. Steel reinforcement bars (rebar) are an important construction material for full-capacity cryogenic energy storage tanks. The performance of rebar is an important index in the process of designing the strength of building structures. The factors affecting the properties of rebar are diverse, and reasonable control of each influencing factor can improve the performance of rebar used for liquid ammonia storage tanks. This paper carries out the study on the mechanical properties of the steel reinforcement bars from the concrete of the main container under low temperatures for storing liquid ammonia. Through experimental research on the failure of steel used in external tanks, it has been shown that temperature has a significant impact on the ductile-brittle transition. Further treatment can effectively prevent the brittleness of steel bars, improve the safety and reliability of storage tanks at low temperatures, and is of great significance for the design and construction of subsequent large liquid ammonia storage tanks.