Concerted Reaction Research Articles

Theoretical study on thermal degradation mechanism of polybutylene terephthalate dimer

Thermal degradation mechanism of polybutylene terephthalate (PBT) dimer was studied by density functional theory (DFT) method M06-2X/6-311G(d). Eight possible reaction paths were designed for the thermal decomposition of PBT dimer, and the thermodynamic and kinetic parameters of elementary reaction steps in each reaction path were calculated. Calculation results show that, in the initial pyrolysis process of PBT, the energy barrier of concerted reaction occurring on the main chain is significantly lower than that of the radical reaction, so terephthalic acid, monobutenyl terephthalate, dibutenyl terephthalate and diterephthalate-1,4-butadiester formed by concerted reaction are main products in PBT initial pyrolysis. The energy barrier of the main chain fracture through the six-membered cyclic transition state is lower than that through the four-membered cyclic transition state, and the main chain fracture of PBT is mainly through the concerted reaction with six-membered cyclic transition state. In addition, the secondary degradation reaction of the main products of PBT pyrolysis was also discussed. It is found that the main products such as 1,3-butadiene, tetrahydrofuran, benzene, CO2 and benzoic acid are mainly generated through concerted reaction in the processes of secondary degradation.

The transition state region in nonsynchronous concerted reactions.

The critical and vanishing points of the reaction force F(ξ) = -dV(ξ)/dξ yield five important coordinates (ξR, ξR* , ξTS, ξP* , ξP) along the intrinsic reaction coordinate (IRC) for a given concerted reaction or reaction step. These points partition the IRC into three well-defined regions, reactants (ξR→ξR* ), transition state (ξR* →ξP* ), and products (ξP* →ξP), with traditional roles of mostly structural changes associated with the reactants and products regions and mostly electronic activity associated with the transition state (TS) region. Following the evolution of chemical bonding along the IRC using formal descriptors of synchronicity, reaction electron flux, Wiberg bond orders, and their derivatives (or, more precisely, the intensity of the electron activity) unambiguously indicates that for nonsynchronous reactions, electron activity transcends the TS region and takes place well into the reactants and products regions. Under these circumstances, an extension of the TS region toward the reactants and products regions may occur.

Theoretical studies on the reaction mechanisms of the oxidation of tetramethylethylene using MO3Cl (M=Mn, Tc and Re)

A theoretical study on the reaction mechanisms of the addition of transition metal oxo complexes of the type MO3Cl (M = Mn, Tc, and Re) to tetramethylethylene (TME) is presented. Theoretical calculations using B3LYP/LACVP* and M06/LACVP* (LACVP* is a combination of the 6-31G(d) basis set along with LANL2DZ pseudopotentials on the metallic centres) were performed and the results are discussed within the framework of reaction energetics. The nature of the stability of the reaction mechanisms was equivalent for both theories. However, the M06/LACVP* simulations generally had slightly lower energies and shorter bond lengths compared to the B3LYP/LACVP* computations.Furthermore, it was observed that the reaction does not proceed via the stepwise reaction mechanism due to kinetic and thermodynamic instabilities. Epoxidation was also found to occur via the [2 + 2] concerted reaction mechanism for the MO3Cl (M = Tc and Re) whereas the permanganyl chloride complex epoxidizes TME via the [2 + 1] concerted reaction mechanism on the singlet potential energy surface (PES). Dioxylation was observed to proceed via the [3 + 2] route for the addition of MO3Cl (M = Tc and Re) and TME. Results indicate that all reaction surfaces were unselective except for the permanganyl chloride catalyzed surface which leads to the formation of epoxides exclusively.Changes in temperatures from 298.15 K to 373.15 K, resulted in kinetically and thermodynamically unstable reaction pathways as the activation and reaction energies increased generally. On the singlet PES, the rate constant calculations showed that the [3 + 2] catalyzed surface reaction mechanism leading to dioxylation was faster than the [2 + 2] mechanism in cases where plausible.Theoretical values from the global reactivity parameters, namely the chemical hardness, chemical potential, electrophilic and nucleophilic indices, are in good correlation with the DFT activation and reaction energies at both levels of theories. Thus, as the electrophilic nature of the metal decreases from Mn to Re, so do the activation and reaction energies increase from Mn to Re, indicating that the higher the electrophilicity of the metal centre, the more spontaneous the oxidation reaction.

A 1,2,3-triazole-derived pincer-type mesoionic carbene complex of iron(II): carbonyl elimination and hydrosilylation of aromatic aldehydes via the concerted reaction with hydrosilane and a base.

Iron complexes bearing 1,2,3-triazol-5-ylidene were synthesized and applied to the reaction with hydrosilane and homogeneous catalytic hydrosilylation of aromatic ketones and aldehydes. Addition of a free carbene to a solution of Fe(CO)4Br2 yielded an octahedral, diamagnetic and cationic iron(II) complex [Fe(1,2,3-triazolylidene)(CO)2Br]+. Pyrolysis of the dicarbonyl complex eliminated the two CO ligands to form a paramagnetic four-coordinate complex. A theoretical study using DFT calculations indicated that the spin state changed from singlet to quintet during ligand elimination. Investigations of the successful hydrosilylation of acetophenone and benzaldehyde derivatives using MIC-iron(II) bromide suggested the importance of the base for efficient conversion in the catalytic process. The bromide-to-hydride exchange reaction, transmetallation, of MIC-iron(II) bromide in the presence of KOtBu and HSi(OEt)3 which could occur in the initial process of hydrosilylation was proposed, and supported by a theoretical study.

Diastereoselective synthesis and structure-affinity relationships of σ1 receptor ligands with spirocyclic scaffold.

Spirocyclic scaffolds play an increasing role in drug discovery as they define a rigid three-dimensional space to increase specific interactions with protein binding sites. Herein, a spirocyclic center was introduced into the lead compound 1 to rigidify its flexible benzylaminoethyl side chain. The key step of the synthesis was the reaction of different α,β-unsaturated amides 6 and 13-16 with methyl acrylate in the presence of TBDMSOTf. DFT calculations explain the mechanism of this transformation as concerted Diels-Alder reaction (functionals B3LYP and TPSS) or double (aza)-Michael addition (functionals PBE and wB97X-D). After separation of the diastereomeric spirocyclic products 8 and 17-20, LiAlH4 reduction provided the spirocyclic hydroxymethyl piperidines 21a,b-25a,b showing low nanomolar σ1 affinity (Ki < 100 nM). trans-Configured ligands (a-series) showed higher or equal σ1 affinity and higher selectivity over σ2 receptors and GluN2B-NMDA receptors than their cis-configured analogs (b-series). The additional hydroxymethyl moiety brings the log D7.4 value in a promising range. The high σ1 affinity (Ki = 3.6 nM) and the low lipophilicity result in the highest lipophilic ligand efficiency for the dispiro compound 23a (LLE = 6.0). The spirocyclic compounds reported herein and in particular the dispiro compound 23a demonstrate that ligands containing a large number of sp3 C-atoms possess favorable pharmacological (σ1 receptor affinity, receptor selectivity) and physicochemical properties (log D7.4 value) resulting in promising LLE.

Why Woodward and Hoffmann? And Why 1965?**

Previous publications in this series on the history of the development of the Woodward-Hoffmann rules revealed why Woodward and Hoffmann were prime candidates to solve the pericyclic no-mechanism problem. This publication explains why it was the collaborative team of R. B. Woodward and Roald Hoffmann who did solve this mechanistic problem in a series of five communications in the Journal of the American Chemical Society in 1965. That is, the reasons why Woodward and Hoffmann were the perfect team, and why their individual capabilities, experiences, and qualities provided the perfect synergy are described. In part, this was the right time and the right place for them both, but the synergies were fundamental, intrinsic and idiosyncratic as a collaborative pair. Their orbital symmetry rules provided the mechanism of all concerted pericyclic reactions including electrocyclizations, cycloadditions, and sigmatropic rearrangements. Why it was 1965 and not earlier is also discussed.

Cu-electrodeposited gold electrode for the sensitive electrokinetic investigations of nitrate reduction and detection of the nitrate ion in acidic medium

The electro-catalytic reduction of nitrate ion in acidic media was observed at the Cu-electrodeposited Au surface. The voltammetric analysis represented that the Cu/Au electrode has an enhanced catalytic activity towards nitrate reduction in acidic medium through by eight electrons transfer process. Ammonia (NH3) was produced from the reduction of nitrate (NO3–) which followed a concerted reaction pathway as the value of transfer coefficient was 0.45 at Cu/Au electrode in the acidic medium. The value of standard rate constant and open circuit potential was evaluated as 2.48 × 10−4 cms−1 and 0.10 V respectively. This Cu/Au electrode displayed a good sensitivity (5.9378 μAµM−1cm−2) and lower detection limit (LOD: 0.52 µM) towards the reduction of nitrate ion and exhibited excellent performance in real sample analysis.

Prediction of High-Yielding Single-Step or Cascade Pericyclic Reactions for the Synthesis of Complex Synthetic Targets.

Pericyclic reactions, which involve cyclic concerted transition states without ionic or radical intermediates, have been extensively studied since their definition in the 1960s, and the famous Woodward-Hoffmann rules predict their stereoselectivity and chemoselectivity. Here, we describe the application of a fully automated reaction-path search method, that is, the artificial force induced reaction (AFIR), to trace an input compound back to reasonable starting materials through thermally allowed pericyclic reactions via product-based quantum-chemistry-aided retrosynthetic analysis (QCaRA) without using any a priori experimental knowledge. All categories of pericyclic reactions, including cycloadditions, ene reactions, group-transfer, cheletropic, electrocyclic, and sigmatropic reactions, were successfully traced back via concerted reaction pathways, and starting materials were computationally obtained with the correct stereochemistry. Furthermore, AFIR was used to predict whether the identified reaction pathway can be expected to occur in good yield relative to other possible reactions of the identified starting material. In order to showcase its practical utility, this state-of-the-art technology was also applied to the retrosynthetic analysis of a natural product with a relatively high number of atoms (52 atoms: endiandric acid C methyl ester), which was first synthesized by Nicolaou in 1982 and provided the corresponding starting polyenes with the correct stereospecificity via three pericyclic reaction cascades (one Diels-Alder reaction as well as 6π and 8π electrocyclic reactions). Moreover, not only systems that obey the Woodward-Hoffmann rules but also systems that violate these rules, such as those recently calculated by Houk, can be retrosynthesized accurately.

On the Mechanism of the Formal [2+2] Cycloaddition - Retro-electrocyclization (CA-RE) Reaction.

The [2+2] cycloaddition - retro-electrocyclization (CA-RE) reaction is a "click-like" protocol for facile synthesis of donor-acceptor chromophores from an alkyne and tetracyanoethylene. Herein we shed light on the mechanism of this reaction by detailed kinetics studies using 1 H NMR spectroscopy. By considering several experiments simultaneously, a variety of mechanistic models was evaluated. Surprisingly, a model in which the final 1,1,4,4-tetracyanobuta-1,3-diene product promoted the first step was the only one that described well the experimental data. This autocatalysis model also involved a non-concerted, stepwise formation of the cyclobutene cycloaddition adduct. By proper choice of conditions, we were able to generate the transient cyclobutene in sufficient amount to verify it as an intermediate using 13 C NMR spectroscopy. For its final retro-electrocyclization step, simple first-order kinetics was observed and only minor solvent dependence, which indicates a concerted reaction.

Mechanistic insights into the self-esterification of lactic acid under neutral and acidic conditions

Lactic acid (LA) is frequently used as the starting material for the production of biodegradable and/or bio-compatible polymers. We study several mechanisms which have been envisaged as important for the formation of lactide (LT, the cyclic diester of LA) in toluene solutions, both under neutral and acidic conditions. Quantum mechanical calculations of molecules and aggregates have been performed at the DFT level. We determine the free energies and molecular geometries of the reactants, products, the transition states, and intermediates. Among many proposed mechanisms, we confirm that, under neutral conditions, there is no promising reaction at the prevailing experimental conditions. This is to a large extent due to entropic effects. Under acidic conditions, on the other hand, both initial conversion of LA to dimers and the subsequent conversion to lactide will proceed, in particular if additional LA molecules are available (asynchronous concerted trimolecular reaction). However, to be selective towards LT, the systems should not contain an excess of LA, a condition that could be met in suitable porous media.

Diagnostic test property of transcription-reverse transcription concerted reaction reagent TRCReady® SARS-CoV-2 i using nasopharyngeal swab samples

TRCReady® SARS-CoV-2 i is a reagent for transcription-reverse transcription concerted reaction (TRC) to detect SARS-CoV-2 N2 gene, used with the automated rapid isothermal nucleic acid amplification test (NAAT) analyzer TRCReady®-80. Sensitivity and specificity of TRCReady® SARS-CoV-2 i was assessed by comparison with the results of real-time reverse transcription-polymerase chain reaction (RT-PCR) using nasopharyngeal swab samples. From November 2020 to March 2021, a total of 441 nasopharyngeal swabs were obtained and analyzed both with TRCReady® SARS-CoV-2 i and RT-PCR. Sensitivity and specificity of TRCReady® SARS-CoV-2 i were 94.6% (53/56) and 99.2% (382/385), respectively. Reaction time to positivity of TRCReady® SARS-CoV-2 i ranged from 1.166 to 9.805 (median: 2.887) min, and minimum detection sensitivity of TRCReady® SARS-CoV-2 i was 9 copies per test, with reaction time as 5.014 min. Detection of SARS-CoV-2 gene from nasopharyngeal swab sample using TRCReady® SARS-CoV-2 i shows comparative diagnostic test accuracy with RT-PCR, and can be used as a useful test to diagnose SARS-CoV-2 infection.

Carbon‐Supported Au Catalyst in Acetylene Hydrochlorination: Enhancing Catalytic Performance by Complexation of Dicarbonyl Ligands

AbstractCarbon‐supported Au (Au/AC) has been proven to be one of the most promising catalysts in the field of acetylene hydrochlorination. However, the catalytic performance of conventional Au/AC catalyst is usually limited due to the unsatisfactory dispersion of active Au cation on the surface of the support, carbon deposition, and inevitable reduction to inactive Au nanoparticles. Herein, Au catalysts with highly dispersed Au cation were developed using the complexation of dicarbonyl ligand N‐chlorosuccinimide (NCS) and N‐methylsuccinimide (NMS). The obtained Au−NMS/AC and Au−NCS/AC catalysts with 0.1 wt.% Au loading possessed acetylene conversion of 98 % and 88 % at 180 °C and GHSV (C2H2) of 160 h−1, which were clearly better than that of pristine Au/AC. The characterization results showed that coordination between Au cation and ligands enhanced the dispersion of Au species, suppressed the reduction of Au cation, and reduced the formation of carbon deposits. Density functional theory (DFT) calculations suggest that Au−NMS/AC and Au−NCS/AC catalysts follow a HCl‐preferred concerted addition reaction mechanism with lower reaction energy barrier. This favors the high activity and nuclearity stability of the Au center. This study provides great potential for the use of dicarbonyl ligands on Au‐based catalysts in acetylene hydrochlorination.

Synergy effects of ICT diffusion and foreign direct investment on inclusive growth in Sub-Saharan Africa.

The present study critically examines the synergy effect of information communication technology (ICT) diffusion and foreign direct investment (FDI) on inclusive growth in Sub-Saharan African (SSA) countries using a modified system-generalized method of moments (GMM) model based on panel data covering the period 2005–2020. This study differs significantly from the previous studies in four ways: (i) this study uses a more comprehensive measure of ICT by computing a composite ICT index, which takes into account several ICT indicators; (ii) some existing study uses a narrow proxy of inclusive growth using the Gini index as a proxy, while others consider three patterns of economic growth dynamics (GDP growth, real, and per capita GDP). For robust analysis, we computed a composite inclusive growth index that takes into account several shared growth indicators; (iii) our model captures the heterogeneity effect of the interaction term of FDI and ICT diffusions on two groups of SSA countries, unlike the previous studies that estimated the joint impact of FDI and ICT on the whole group of countries; (iv) we contribute to the extant studies by determining the threshold level at which ICT diffusion may determine the effect of FDI on inclusive growth. Overall, empirical results show that the positive effect of FDI on inclusive growth could intensify when ICT diffusion is beyond a given threshold level, while inflation and vulnerable unemployment deteriorate inclusive growth, among others. We are of the opinion that ICTs should engage to cushion present and future environmental threats/natural catastrophes through improving geographical monitoring and concerted reaction coupled with other policy recommendations paying special attention to Sustainable Development Goals (SDGs) fifteen (15)—inclusive growth.Supplementary InformationThe online version contains supplementary material available at 10.1007/s11356-022-22689-3.

Adsorption and Oxidation of NO2 on Anatase TiO2: Concerted Nitrate Interaction and Photon-Stimulated Reaction

The catalytic and photon-induced oxidation of NO2 on anatase TiO2 has been studied and compared with the surface nitrate species obtained after adsorption of HNO3. Using a combination of in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), density functional theory (DFT), and temperature-programmed desorption (TPD), it is shown that identical products are obtained in all reaction systems but that their formation rates differ significantly. The surface reaction products are identified as combinations of surface–NO3– species, where NO2 bonds to the lattice oxygen, and freely adsorbed NO3– ions. These products can be obtained either by dissociative adsorption of HNO3 or by catalytic/photocatalytic oxidation of NO2, which is facilitated by UV light. A concerted reaction mechanism is unraveled that involves reorientation of bidentate nitrate that pushes out a neighboring protonated lattice oxygen to form a surface–NO3– species and a terminal OH group. The thermal stability of these surface species has been studied by means of TPD and simultaneous in situ DRIFTS measurements that reveal a main desorption peak (m/z = 46) at around 430 °C, which is attributed to concerted nitrate desorption through pentoxide (N2O5) formation. A weaker and broader TPD peak is found at about 185 °C and is attributed to desorption of nitrate species bonded in a compressed configuration. The experimental results can be explained by the changing stability of the identified nitrate products, which depends strongly on the surface chemical environment and the surface coverage. The DFT results show that the stabilization of intermediate NO2 adsorbates and the final nitrate reaction products occurs through a bifunctional charge exchange mechanism that is mediated by the TiO2 crystal. In particular, a stable surface–NO3– and NO3– ion pair configuration has been identified. This mechanism explains both the thermal and photoinduced oxidation of NO2 and their thermal stability and different formation rates, yielding high photoinduced oxidation reaction rates. Our results provide insights into the structure and chemical stability of nitrate surface products on TiO2 particles and their formation mechanism, which is important for understanding their catalyzed transformation into the harmful compounds HONO and N2O during continued UV light illumination.

Spatial Organization of Photocatalysts and Enzymes on Janus-Type DNA Nanosheets for Efficient CO2 Conversion

Bioinspired photosynthetic systems composed of photocatalysts and enzymes are a notable framework for converting CO2 to high-value chemicals. However, catalyst/enzyme deactivation and poor electron transfer kinetics in multistep photochemical processes severely limit their catalytic efficiencies. In this study, Janus-type DNA nanosheets (NSs) presenting two different DNA sequences on each face were utilized as a support for the selective immobilization of a Rh complex and formate dehydrogenase (FDH) for concerted catalytic reactions for CO2 reduction. Based on the face selectivity, DNA-conjugated Rh complex and FDH were immobilized on NSs into four different configurations: Rh complex on NS (NS1), FDH on NS (NS2), Rh complex and FDH on opposite faces of NS (NS3), FDH and Rh complex on the same face of NS (NS4). The catalytic system exhibited CO2 conversion efficiencies highly dependent on the spatial organization of Rh complex and FDH, showing the reactivity for the formate production in the order of NS1 coupled with free FDH > NS3 > NS2 coupled with free Rh complex > NS4 > free Rh complex and FDH. The NS1 coupled with free FDH showed turnover number (TON) of 1360 for the formate production based on NAD+, which is the highest value reported thus far for Rh-based photocatalyst/enzyme coupled systems. The results demonstrate that the compartmentalization of photocatalysts and biological enzymes is a viable approach for improving the efficiency of CO2 conversion and provide important design rules for building efficient artificial photosynthetic systems.

Electrochemical study and experimental simulation of the synergistic effect of a formulation based on Ficus pumila Linn. Leaves extract and zinc sulfate on the XC38 steel corrosion inhibition in NaCl solution

The inhibitive activity of a mixture of Ficus pumila Linn. leaves hydroalcoholic extracts (HEFP) and zinc ions against corrosion of XC38 steel in NaCl solution was investigated. Electrochemical measurements (potentiodynamic polarization and electrochemical impedance spectroscopy at and around the corrosion potential) and surface analysis (SEM/EDX) have shown that the presence of zinc ions considerably increases the inhibitive capacity of HEFP. However, appropriate concentrations of zinc ions (50 and 100 ppm) and of HEFP (200 ppm) are necessary to have an optimal inhibitive effect. The formation of organometallic complexes between zinc ions and some organic compounds of HEFP (polyphenols and carbohydrates) are the determining step of the synergistic inhibition. Since the main inhibitive agents in plant extracts are polyphenols, a simulation of this inhibitive character was electrochemically done with a mixture of flavonoid (quercetin), phenolic acid (gallic acid) and zinc ions in order to elucidate the inhibition mechanism. The obtained results showed that the electrochemical behavior of XC38 steel in the presence of this mixture is quite similar to that obtained in the presence of HEFP + Zn2+ formulation. The proposed inhibition mechanism, which explains the good inhibitive efficiency observed in presence of the HEFP + Zn2+ formulation, is based on concerted reactions between the steel oxidation products (Fe2+ and Fe3+), the zinc ions and the Iron(II) and Iron(III) complexing agents present in the extract.

Analyses of pre-steady-state kinetics and isotope effects of the γ-elimination reaction catalyzed by Citrobacter freundii methionine γ-lyase

Methionine γ-lyase (MGL) is a pyridoxal 5′-phosphate–dependent enzyme catalyzing γ-elimination in l-methionine. Pyridoxal 5′-phosphate–dependent enzymes have unique spectral properties that allow to monitor sequential formation and decomposition of various intermediates via the detection of absorbance changes. The kinetic mechanism of the γ-elimination reaction catalyzed by Citrobacter freundii MGL was elucidated here by fast stopped-flow kinetic analysis. Single-wavelength detection of characteristic absorbance changes enabled us to compare transformations of intermediates in the course of the reaction with different substrates. The influence of various γ-substituents in the substrate on the formation of key intermediates was estimated. Kinetic isotope effects of α- and β-protons were determined using deuterium-substituted l-methionine. Contributions of amino acid residues Tyr113 and Tyr58 located in the active site on the formation and decomposition of reaction intermediates were identified too. α-Aminocrotonate formation is the rate-limiting step of the enzymatic γ-elimination reaction. Kinetic isotope effects strongly support concerted reaction mechanisms of transformation between an external aldimine and a ketimine intermediate as well as a ketimine intermediate and an unsaturated ketimine.

Turing patterns by supramolecular self-assembly of a single salphen building block

SummaryIn the 1950s, Alan Turing showed that concerted reactions and diffusion of activating and inhibiting chemical species can autonomously generate patterns without previous positional information, thus providing a chemical basis for morphogenesis in Nature. However, access to these patterns from only one molecular component that contained all the necessary information to execute agonistic and antagonistic signaling is so far an elusive goal, since two or more participants with different diffusivities are a must. Here, we report on a single-molecule system that generates Turing patterns arrested in the solid state, where supramolecular interactions are used instead of chemical reactions, whereas diffusional differences arise from heterogeneously populated self-assembled products. We employ a family of hydroxylated organic salphen building blocks based on a bis-Schiff-base scaffold with portions responsible for either activation or inhibition of assemblies at different hierarchies through purely supramolecular reactions, only depending upon the solvent dielectric constant and evaporation as fuel.

Influence of an Oriented External Electric Field on the Mechanism of Double Proton Transfer between Pyrazole and Guanidine: from an Asynchronous Plateau Transition State to a Synchronous or Stepwise Mechanism.

The double proton transfer (DPT) reaction between pyrazole and guanidine, a concerted reaction but strongly asynchronous and presenting a "plateau transition region", has been theoretically reinvestigated in the presence of an external uniform electric field. First, we computed the reaction path by DFT and proposed a very detailed description of the constitutive electronic events, based on the ELF topology and the bond evolution theory. Then, we studied the effect of an oriented external electric field (OEEF) on the reaction mechanism, for an OEEF oriented along the proton transfer axis. We observe that in one direction, the DPT reaction can be transformed into a stepwise reaction, going through a stabilized single proton transferred intermediate. Contrarily, the two proton transfers occur simultaneously when the electric field is applied in the opposite direction. In the latter case, the order in which the two protons are transferred in the same elementary step can even be reversed if the OEEF is intense enough. Finally, it has been shown that the evolution of the double proton transfer reaction in the presence of an electric field could be quantitatively anticipated by analyzing the ELF value at the bifurcation point between V(A, H) proton donor and V(B) proton acceptor of the double hydrogen bonded complex in the entrance channel.

Triplet-driven chemical reactivity of β-carotene and its biological implications.

The endoperoxides of β-carotene (βCar-EPOs) are regarded as main products of the chemical deactivation of 1O2 by β-carotene, one of the most important antioxidants, following a concerted singlet-singlet reaction. Here we challenge this view by showing that βCar-EPOs are formed in the absence of 1O2 in a non-concerted triplet-triplet reaction: 3O2 + 3β-carotene → βCar-EPOs, in which 3β-carotene manifests a strong biradical character. Thus, the reactivity of β-carotene towards oxygen is governed by its excited triplet state. βCar-EPOs, while being stable in the dark, are photochemically labile, and are a rare example of nonaromatic endoperoxides that release 1O2, again not in a concerted reaction. Their light-induced breakdown triggers an avalanche of free radicals, which accounts for the pro-oxidant activity of β-carotene and the puzzling swap from its anti- to pro-oxidant features. Furthermore, we show that βCar-EPOs, and carotenoids in general, weakly sensitize 1O2. These findings underlie the key role of the triplet state in determining the chemical and photophysical features of β-carotene. They shake up the prevailing models of carotenoid photophysics, the anti-oxidant functioning of β-carotene, and the role of 1O2 in chemical signaling in biological photosynthetic systems. βCar-EPOs and their degradation products are not markers of 1O2 and oxidative stress but of the overproduction of extremely hazardous chlorophyll triplets in photosystems. Hence, the chemical signaling of overexcitation of the photosynthetic apparatus is based on a 3chlorophyll-3β-carotene relay, rather than on extremely short-lived 1O2.