Concerted Elimination Research Articles

High-Pressure-Limit and Pressure-Dependent Rate Rules for Unimolecular Reactions Related to Hydroperoxy Alkyl Radicals in Normal Alkyl Cyclohexane Combustion. 1. Concerted HO2 Elimination Reaction Class and β-Scission Reaction Class.

The reactions of the concerted HO2 elimination from alkyl peroxy radicals and the β-scission of the C-OOH bond from hydroperoxy alkyl radicals, which lead to the formation of olefins and HO2 radicals, are two important reaction classes that compete with the second O2 addition step of hydroperoxy alkyl radicals, which are responsible for the chain branching in the low-temperature oxidation of normal alkyl cycloalkanes. These two reaction classes are also believed to be responsible for the negative temperature coefficient behavior due to the formation of the relatively unreactive HO2 radical, which has the potential to inhibit ignition of normal alkyl cycloalkanes. In this work, the kinetics of the above two reaction classes in normal alkyl cycloalkanes are studied, where reactions in the concerted elimination class are divided into subclasses depending upon the types of carbons from which the H atom is eliminated and the positions of the reaction center (on the alkyl side chain or on the cycle), and the reactions in the β-scission reaction class are divided into subclasses depending upon the types of the carbons on which the radical is located and the positions of the reaction center. Energy barriers by using quantum chemical methods at the CBS-QB3 level, high-pressure-limit rate constants by using canonical transition state theory, and pressure-dependent rate constants at pressures from 0.01 to 100 atm by using Rice-Ramsberger-Kassel-Marcus/Master Equation theory are calculated for a representative set of reactions from methyl cyclohexane to n-butyl cyclohexane in each subclass, from which high-pressure-limit rate rules and pressure-dependent rate rules for each subclass are derived from the average rate constants of reactions within each subclass. A comparison of the rate constants for the reactions in the two reaction classes calculated in this work is made with the rate constants of the same reactions from available mechanisms published in the literature, where most of the rate constants are approximately estimated from analogous reactions in alkanes or small alkyl cyclohexanes, and it is found that a large difference may exist between them, indicating that the present work, which provides more accurate kinetic parameters and reasonable rate rules for these reaction classes, can be helpful to construct higher-accuracy mechanism models for normal alkyl cyclohexane combustion.

Activation of Aryl Carboxylic Acids by Diboron Reagents towards Nickel-Catalyzed Direct Decarbonylative Borylation.

The Ni-catalyzed decarbonylative borylation of (hetero)aryl carboxylic acids with B2 cat2 has been achieved without recourse to any additives. This Ni-catalyzed method exhibits a broad substrate scope covering poorly reactive non-ortho-substituted (hetero)aryl carboxylic acids, and tolerates diverse functional groups including some of the groups active to Ni0 catalysts. The key to achieve this decarbonylative borylation reaction is the choice of B2 cat2 as a coupling partner that not only acts as a borylating reagent, but also chemoselectively activates aryl carboxylic acids towards oxidative addition of their C(acyl)-O bond to Ni0 catalyst via the formation of acyloxyboron compounds. A combination of experimental and computational studies reveals a detailed plausible mechanism for this reaction system, which involves a hitherto unknown concerted decarbonylation and reductive elimination step that generates the aryl boronic ester product. This mode of boron-promoted carboxylic acid activation is also applicable to other types of reactions.

Activation of Aryl Carboxylic Acids by Diboron Reagents towards Nickel‐Catalyzed Direct Decarbonylative Borylation

AbstractThe Ni‐catalyzed decarbonylative borylation of (hetero)aryl carboxylic acids with B2cat2 has been achieved without recourse to any additives. This Ni‐catalyzed method exhibits a broad substrate scope covering poorly reactive non‐ortho‐substituted (hetero)aryl carboxylic acids, and tolerates diverse functional groups including some of the groups active to Ni0 catalysts. The key to achieve this decarbonylative borylation reaction is the choice of B2cat2 as a coupling partner that not only acts as a borylating reagent, but also chemoselectively activates aryl carboxylic acids towards oxidative addition of their C(acyl)−O bond to Ni0 catalyst via the formation of acyloxyboron compounds. A combination of experimental and computational studies reveals a detailed plausible mechanism for this reaction system, which involves a hitherto unknown concerted decarbonylation and reductive elimination step that generates the aryl boronic ester product. This mode of boron‐promoted carboxylic acid activation is also applicable to other types of reactions.

C(sp2)-CF3 Reductive Elimination from Well-Defined Argentate(III) Complexes [nBu4N][Ag(Ar)(CF3)3

The preparation of a series of well-defined, shelf-stable square planar aryl(tris(trifluoromethyl))argentate(III) complexes [nBu4N]+[Ag(Ar)(CF3)3]− and their C(sp2)-CF3 bond-forming reductive elimination are described. Mechanistic studies of the C(sp2)-CF3 reductive elimination from these complexes, including kinetic studies, effect of temperature and solvent, and DFT calculations, indicate that the C(sp2)-CF3 bond-forming process occurred via a concerted reductive elimination pathway.

Divergent rhodium-catalyzed electrochemical vinylic C\u2013H annulation of acrylamides with alkynes

α-Pyridones and α-pyrones are ubiquitous structural motifs found in natural products and biologically active small molecules. Here, we report an Rh-catalyzed electrochemical vinylic C–H annulation of acrylamides with alkynes, affording cyclic products in good to excellent yield. Divergent syntheses of α-pyridones and cyclic imidates are accomplished by employing N-phenyl acrylamides and N-tosyl acrylamides as substrates, respectively. Additionally, excellent regioselectivities are achieved when using unsymmetrical alkynes. This electrochemical process is environmentally benign compared to traditional transition metal-catalyzed C–H annulations because it avoids the use of stoichiometric metal oxidants. DFT calculations elucidated the reaction mechanism and origins of substituent-controlled chemoselectivity. The sequential C–H activation and alkyne insertion under rhodium catalysis leads to the seven-membered ring vinyl-rhodium intermediate. This intermediate undergoes either the classic neutral concerted reductive elimination to produce α-pyridones, or the ionic stepwise pathway to produce cyclic imidates.

Rare-Earth Metal Boroxide with Formal Triple Metal–Oxygen Orbital Interaction: Synthesis from B(C 6 F 5 ) 3 ·H 2 O and Radical-Anion Ligated Rare-Earth Metal Amides

Rare-earth metal boroxides are not only rare and of great synthetic challenge but also important theoretically due to their unrevealed bonding characteristics. In this paper, we report the synthesi...

A novel interaction mechanism in lignin pyrolysis: Phenolics-assisted hydrogen transfer for the decomposition of the β-O-4 linkage

Abstract Pyrolysis of lignin involves complex unimolecular decomposition and bimolecular interaction mechanisms. Unimolecular decomposition of lignin model compounds has been widely investigated, while bimolecular interactions are far from well elucidated. Currently, only two radical reaction-based interactions, i.e., hydrogen abstraction and hydrogen-bond-induced homolysis mechanisms, have been proposed to explain the interactions in the lignin pyrolysis process, which ignores the concerted reaction-based interactions involving the pyrolytic products of lignin. Particularly, a large number of phenolics are produced in the pyrolysis of lignin, which can further affect the concerted pyrolysis reactions of lignin. In the present work, a novel interaction mechanism, phenolics-assisted hydrogen transfer (phenolics-AHT) process for the concerted reactions, is confirmed and carefully investigated. Phenylethyl phenyl ether (PPE), a typical β-O-4 lignin dimer, is used as the model compound to reveal the phenolics-AHT mechanism in the lignin pyrolysis system. Density functional theory (DFT) calculation, electrostatic potential (ESP) analysis, and fast pyrolysis experiment results are combined to reveal that the phenolic products participate in the hydrogen transfer process of the concerted Maccoll elimination reaction by means of their phenolic hydroxyl structures and significantly reduce the energy barrier, thus promoting the cleavage of the β-O-4 linkage. On the contrary, phenolics-AHT has no obvious effect on the concerted retro-ene fragmentation. At medium pyrolysis temperatures, the hydrogen transfer processes induced by phenolic products play a more significant role in the dissociation of the β-O-4 linkage than the hydrogen abstraction induced by radicals, due to the limited amount of free radicals. In addition, DFT calculation results further suggest that decarbonylation, decarboxylation, dehydration, tautomerism, and other concerted reactions can also be promoted by phenolics-AHT.

An experimental and kinetic modeling study of cyclopentane and dimethyl ether blends

Cyclopentane is a suitable naphthene, or cycloalkane, in a palette for multi-component gasoline surrogate fuels due to its presence in market fuels and its relevance to alkyl substituted cyclopentanes also present. However, the previous oxidation studies of cyclopentane have primarily focused on neat mixtures. Blending cyclopentane with dimethyl ether in this work therefore serves to inform our understanding of, and improve predictive models for, multi-component mixtures. In this work, the auto-ignition of cyclopentane/dimethyl ether blends was studied in a high-pressure shock tube and in a rapid compression machine. A wide range of temperatures (650 – 1350 K) and elevated pressures of 20 and 40 bar were studied at equivalence ratios of 0.5, 1.0 and 2.0 in air for two blending ratios (30/70 and 70/30 mole% cyclopentane/di-methyl ether mixtures). A detailed kinetic model for cyclopentane was revised to capture the measured ignition delay times and apparent heat release rates in this study. Literature ignition delay time, jet-stirred reactor, and laminar burning velocity measurements of neat cyclopentane were used as additional validation. Improvements to the kinetic model were based on recent literature studies related to sub-models including cyclopentene and cyclopentadiene which allowed the removal of previous local rate-constant optimizations. Low temperature reactivity of cyclopentane was found to be controlled by the branching ratio between concerted elimination of HȮ2 and the strained formation of Q˙OOH radicals in agreement with previous studies. In this study, the low branching ratio of Q˙OOH formation increases the influence of a competing consumption pathway for cyclopentyl-peroxy (CPTȮ2J) radicals. The sensitivity of the simulated ignition delay times to the formation of cyclopentyl hydroperoxide (CPTO2H), from CPTȮ2J and HȮ2, is discussed. The current model is used to analyze the influence of dimethyl ether on the reactivity of cyclopentane in the context of previous literature studies of dimethyl ether binary blends with ethanol and toluene.

A theoretical kinetics study on low-temperature oxidation of n-C4H9 radicals

The low-temperature oxidation mechanism of n‑butyl radicals (n-C4H9) has been investigated by high level quantum chemical calculations coupled with the Rice–Ramsperger–Kassel–Marcus/Master Equation (RRKM/ME) theory. The potential energy surfaces (PES) were explored at the QCISD(T)/CBS//B3LYP/6-311++G(d,p) level. The temperature- and pressure-dependent rate constants were computed and fitted in modified Arrhenius parameters. The major reaction channels were discussed to more deeply understand the competing relationships between chain branching, chain propagation and termination reactions. The results show that the 1,5 H-shift reaction is more competitive than the 1,6 H-shift and 1,4 H-shift for isomerization reactions of n‑butyl peroxy radicals, and the concerted HO2 elimination channel to form butene becomes more important at high temperatures. Furthermore, based on our calculations, a revised kinetic model was developed to describe n-butane oxidation. Good consistency between model predictions and experimental data was shown. This study enhances our understanding of the combustion mechanism of n-butane and can be used as a reliable reference for mechanistic understanding of larger alkanes.

Theoretical and experimental studies on concerted elimination of 1, 2‐bromochloroethane monocation to C2H4+ and BrCl

AbstractAb initio calculations for the concerted elimination of 1, 2‐bromochloroethane monocation (1,2‐C2H4BrCl+) to C2H4+ and BrCl are performed using the Minnesota density functional M06‐2X and the def2‐TZVP basis set. Ab initio calculations are also carried out for the concerted elimination of 1,2‐C2H4BrCl+ to C2H4 and BrCl+ because the positive charge can be assigned to either moiety in the dissociative ionization process of 1,2‐C2H4BrCl+. Our results demonstrate that the concerted elimination channel of 1,2‐C2H4BrCl+ to C2H4+ and BrCl is preferred and that 1,2‐C2H4BrCl+ surpasses two energy barriers and then separates into C2H4+ + BrCl through an asynchronous concerted process. Experimentally, we confirm that this elimination channel is from the dissociative ionization process of 1,2‐C2H4BrCl+ by using dc‐slice imaging technique. The time‐of‐flight mass spectra of 1,2‐bromochloroethane induced by femtosecond laser pulses show that C2H4+ occurs at a laser intensity of 6.0 × 1013 W/cm2, and BrCl+ occurs at a higher laser intensity than C2H4+. This finding is consistent with the theoretical result that the appearance energy of C2H4+ is lower than that of BrCl+. As such, the low‐velocity component of BrCl+ is absent from our sliced images.

Mechanistic Insights into C(sp2)−C(sp)N Reductive Elimination from Gold(III) Cyanide Complexes

AbstractA new family of phosphine‐ligated dicyanoarylgold(III) complexes has been prepared and their reactivity towards reductive elimination has been studied in detail. Both, a highly positive entropy of activation and a primary 12/13C KIE suggest a late concerted transition state while Hammett analysis and DFT calculations indicate that the process is asynchronous. As a result, a distinct mechanism involving an asynchronous concerted reductive elimination for the overall C(sp2)−C(sp)N bond forming reaction is characterized herein, for the first time, complementing previous studies reported for C(sp3)−C(sp3), C(sp2)−C(sp2), and C(sp3)−C(sp2) bond formation processes taking place on gold(III) species.

Mechanistic Insights into C(sp2 )-C(sp)N Reductive Elimination from Gold(III) Cyanide Complexes.

A new family of phosphine-ligated dicyanoarylgold(III) complexes has been prepared and their reactivity towards reductive elimination has been studied in detail. Both, a highly positive entropy of activation and a primary 12/13 C KIE suggest a late concerted transition state while Hammett analysis and DFT calculations indicate that the process is asynchronous. As a result, a distinct mechanism involving an asynchronous concerted reductive elimination for the overall C(sp2 )-C(sp)N bond forming reaction is characterized herein, for the first time, complementing previous studies reported for C(sp3 )-C(sp3 ), C(sp2 )-C(sp2 ), and C(sp3 )-C(sp2 ) bond formation processes taking place on gold(III) species.

Oxidation kinetics of n-pentanol: A theoretical study of the reactivity of the 1‑hydroxy‑1-peroxypentyl radical

n-Pentanol has been considered as a promising alternative fuel for compression-ignition engines due to its potential to reduce greenhouse gases and pollutant emissions. Engine performance is strongly dominated by fuel oxidation chemistry, and thus a more accurate determination of the coefficients of the reactions ruling its oxidation is essential for the utilization of n-pentanol in combustion engines. The reactions involving 1‑hydroxy‑1-pentyl and molecular oxygen were found to play an important role in controlling the low temperature oxidation chemistry, but have not been investigated experimentally or theoretically; this is also the case for the reactions of the 1‑hydroxy‑1-peroxypentyl radical, which is formed by the addition of oxygen to the radical center of 1‑hydroxy‑1-pentyl. This work presents a theoretical study with high level ab initio calculations at the CCSD(T)/aug-cc-pVTZ//M06-2X/cc-pVTZ level of theory to shed light on the fate of the 1‑hydroxy‑1-peroxypentyl radical. The rate coefficients of all the possible intra-molecular hydrogen shift reactions of that radical were computed using variational transition state theory with small curvature tunneling corrections. For certain reactions, tunneling and variational effects are very pronounced, proving the need for robust methodologies to account for these effects. The hydrogen shift reaction leading to a concerted HO2 elimination and formation of n-pentanal is the dominant pathway and governs the reactivity of 1‑hydroxy‑1-peroxypentyl radical at any temperature. The reverse of this reaction was thereby investigated as well. For this prominent pathway, the effects of multistructural (multiple conformers) torsional anharmonicity of the stationary points were taken into account in order to refine the forward and reverse rate coefficients. The rate coefficients calculated at room temperature are compared to those calculated using a previously developed cost-effective multi-conformer transition state theory approach. The system-specific quantum Rice-Ramsperger-Kassel (SS-QRRK) theory was used to compute the pressure-dependent rate coefficients, which indicate significant pressure dependence at intermediate and high temperatures. Implementation of the calculated reaction rate coefficients in chemical kinetics models of n-pentanol revealed that our computed rate coefficients enable better insights into the chemistry of n-pentanol, and help to understand how n-pentanal is formed.

Automatic construction of transition states and on-the-fly accurate kinetic calculations for reaction classes in automated mechanism generators

A detailed combustion mechanism of hydrocarbon fuels usually contains a large number of reactions and need to have kinetic data assigned to them, where the rate constants are usually given by approximate estimation leading to inaccuracies. In this work, a method for construction transition state (TS) and an isodesmic reactions correction scheme for accurate and automatic calculation of rate constants have been designed. These methods are tested using the cyclization reactions of QOOH radicals and the concerted elimination reactions of RO2 radicals. The results show that the automatic TS construction method is effective to construct the initial guesses of the transition states, the isodesmic reactions corrected results are close to the CCSD(T) results and some of the rate constants are significantly different from the rate constants used in the automated mechanism generator, indicating that it is necessary and significant to perform on-the-fly accurate calculation of rate constants in an automated mechanism generator.

Theoretical calculation of low-temperature oxidation of heptyl radicals and O2

n-Heptane, as an alternative gasoline fuel, was used for research on low-temperature oxidation in this study, where the reactions of alkyl radicals (C7H15) and O2 play an important role. The related chemical reaction kinetics on four C7H15 radicals and O2 were investigated. The potential energy surfaces (PESs) of C7H15O2 were obtained by the quantum chemical calculation method of CBS-QB3. The pressure- and temperature- dependence of the rate constants was also calculated by solving master equations based on Rice–Ramsperger–Kassel–Marcus theory. In this work, all possible reaction pathways in the oxidation process were considered and calculated. Formation, concerted elimination, and intramolecular H atom transfer reactions of initial product RO2 are very critical to the low-temperature combustion. For four C7H15 radicals, the energy barriers that form RO2 from the HR + O2 association are typically zero, and barriers to subsequent reactions are different by up to 30 kcal/mol. It is most advantageous to form QOOH from RO2 through a six- or seven-member ring transition state. In terms of kinetic aspect, compared with the reaction of O2 plus secondary radicals (HR2, HR3, HR4), the reaction of adding O2 to primary radical (HR1) is less competitive at low temperatures. Moreover, the kinetic data obtained in this study will play an important role in the kinetic model of low-temperature combustion for n-heptane.

Directing-Group-Based Strategy Enabling Intermolecular Heck-Type Reaction of Cycloketone Oxime Esters and Unactivated Alkenes.

A new type of coupling between unactivated olefins and nonstabilized alkyl radicals was achieved, which enabled the first intermolecular Heck-type reaction of cycloketone oxime esters and unactivated alkenes. This directing-group-based strategy was compatible with various unactivated alkenes and cyclobutanone-, cyclopentanone-, and cyclohexanone-derived oxime esters. Density functional theory calculations showed that both excellent regioselectivities and good diastereoselectivities could be ascribed to the 2-butanol-assisted concerted H-OBz elimination of the conformationally strained metallacyclic transition state.

Single-Facet Dominant Anatase TiO2 (101) and (001) Model Catalysts to Elucidate the Active Sites for Alkanol Dehydration

Alkanol dehydration on Lewis acid–base pairs of transition metal oxide catalysts is a reaction of importance in oxygen removal from biomass-derived feedstocks and their conversion to chemicals in general. However, catalysts with a high degree of structural heterogeneity, such as commercial TiO2 powders, are not well-suited to establish rigorous structure–function relationships at an atomic level. Here, we provide compelling evidence for the effects of surface orientation of TiO2 catalyst on elimination reactions of alcohols. Two anatase titania model catalysts, with preferential exposure of (101) and (001) facets, were synthesized and studied for 2-propanol dehydration using kinetic, isotopic, microscopic, and spectroscopic measurements, coupled with DFT calculations. Surface Lewis acid sites were found to be active for 2-propanol dehydration, and (101) facets are more reactive than (001) facets under the reaction conditions studied. On both anatase surfaces, 2-propanol was found to dehydrate via concerted E2 elimination pathways, but with different initial states and thus also different intrinsic activation barriers. Molecular 2-propanol dehydration dominates on TiO2 (101) while on TiO2 (001), 2-propanol simultaneously converts to more stable 2-propoxide before dehydration, which then requires higher activation energies for E2 elimination.

Experimental and kinetic modeling investigation on ethylcyclohexane low-temperature oxidation in a jet-stirred reactor

In this work, the oxidation of ethylcyclohexane was studied in a jet-stirred reactor at 780 Torr, 480–780 K and equivalence ratios of 0.5, 1.0 and 2.0. Synchrotron vacuum ultraviolet photoionization mass spectrometry (SVUV-PIMS) was used for the detection of oxidation products, including a series of reactive intermediates such as cycloalkylhydroperoxides, keto-hydroperoxides, alkenal-hydroperoxides and highly oxygenated molecules. Quantum chemistry calculations were performed to obtain ionization energies for the identification of some important intermediates and energy barriers of several important pathways. On the other hand, this work presents the first efforts on developing a low-temperature oxidation model of ethylcyclohexane. The present model can reasonably capture the low-temperature oxidation reactivities and negative temperature coefficient behaviors observed in both present and previous experimental work of ethylcyclohexane oxidation. Modeling analyses were performed to provide insight into the low-temperature oxidation chemistry of ethylcyclohexane. The two-stage O2 addition mechanism is concluded to dominate the chain-branching process in the low-temperature region. The concerted elimination reactions of cycloalkylperoxy radical and “formally direct” chemically activated reactions of cycloalkyl+O2 result in cycloalkenes and HO2 formation at the negative temperature coefficient region and serve as main chain-termination pathways. Compared with smaller cycloalkanes like cyclohexane and methylcyclohexane, the ethyl sidechain structure in ethylcyclohexane reduces the energy barriers of cycloalkylperoxy radical isomerization and facilitates the formation of keto-hydroperoxides which leads to more pronounced low-temperature oxidation reactivity of ethylcyclohexane.

Concerted aryl-sulfur reductive elimination from PNP pincer-supported Co(iii) and subsequent Co(i)/Co(iii) comproportionation.

This report discloses a combined experimental and computational study aimed at understanding C-S reductive elimination from Co(iii) supported by a diarylamido/bis(phosphine) PNP pincer ligand. Divalent (PNP)Co-aryl complexes could be easily oxidized to five-coordinate Co(iii) derivatives, and anion metathesis provided five-coordinate (PNP)Co(Ar)(SAr') complexes of Co(iii). In contrast to their previously described (POCOP)Co(Ar)(SAr') analogs, but similarly to the (PNP)Rh(Ar)(SAr') and (POCOP)Rh(Ar)(SAr') analogs, (PNP)Co(Ar)(SAr') undergo C-S reductive elimination with the formation of the desired diarylsulfide product ArSAr'. DFT studies and experimental observations are consistent with a concerted process. However, in contrast to the Rh analogs, the immediate product of such reductive elimination, the unobserved Co(i) complex (PNP)Co, un-dergoes rapid comproportionation with the (PNP)Co(Ar)(SAr') starting material to give Co(ii) compounds (PNP)Co-Ar and (PNP)Co-SAr'.

Ciprofloxacin transformation in aqueous environments: Mechanism, kinetics, and toxicity assessment during •OH-mediated oxidation

The initial reactions of organics with •OH are important to understand their transformations and fates in advanced oxidation processes in aqueous phase. Herein, the kinetics and mechanism of •OH-initiated degradation of ciprofloxacin (CIP), an antibiotic of fluoroquinolone class, are obtained using density functional and computational kinetics methods. All feasible mechanisms are considered, including H-abstraction, •OH-addition, and sequential electron proton transfer. Results showed that the H-abstraction is the dominant reaction pathway, and the product radicals P7H, P9H, and P10H are the dominating intermediates. The aqueous phase rate coefficients for the •OH-triggered reaction of ciprofloxacin are calculated from 273 K to 323 K to examine the temperature dependent effect, and the theoretical value of 6.07 × 109 M−1 s−1 at 298 K is close to the corresponding experimental data. Moreover, the intermediates P7H, P9H, and P10H could easily transform to several stable products in the presence of O2, HO2•, and •OH. The peroxy radical, which is generated from the incorporation of H-abstraction product radicals (P7H, P9H, and P10H) with O2, prefers to produce HO2• into the surrounding through direct concerted elimination rather than the indirect mechanism. In addition, the peroxy radical could react with HO2• via triplet and singlet routes, and the former is more favorable due to its smaller barrier compared with the latter. The hydroxyl-substituted CIP has higher activity than its parent compound in their reactions with •OH due to its lower barrier and faster rate. In addition, the -NHC(O)-containing compound IM3-P10-H-4 is harmful to aquatic fish and is the primary product in the •OH-rich environment according to the ecotoxicity assessment computations. This study can improve our comprehension on CIP transformation in complex water environments.