Ligand Concentration Research Articles

Loss of effective lubricating viscosity is the primary mechanical marker of joint inflammation in equine synovitis.

Inflammation of the synovium, known as synovitis, plays an important role in the pathogenesis of osteoarthritis (OA). Synovitis involves the release of a wide variety of pro-inflammatory mediators in synovial fluid (SF) that damage the articular cartilage extracellular matrix and induce death and apoptosis in chondrocytes. The composition of synovial fluid is dramatically altered by inflammation in OA, with changes to both hyaluronic acid and lubricin, the primary lubricating molecules in SF. However, the relationship between key biochemical markers of joint inflammation and mechanical function of SF is not well understood. Here, we demonstrate the application of a novel analytical framework to measure the effective viscosity for SF lubrication of cartilage, which is distinct from conventional rheological viscosity. Notably, in a well-established equine model of synovitis, this effective lubricating viscosity decreased by up to 10,000-fold for synovitis SF compared to a ~4 fold change in conventional viscosity measurements. Further, the effective lubricating viscosity was strongly inversely correlated (r = -0.6 to -0.8) to multiple established biochemical markers of SF inflammation, including white blood cell count, prostaglandin E2 (PGE2 ), and chemokine ligand (CCLs) concentrations, while conventional measurements of viscosity were poorly correlated to these markers. These findings demonstrate the importance of experimental and analytical approaches to characterize functional lubricating properties of synovial fluid and their relationships to soluble biomarkers to better understand the progression of OA.

Electrochemical treatment of wastewaters containing metal-organic complexes: A one-step approach for efficient metal complex decomposition and selective metal recovery

Metal-organic complexes, especially those of ethylenediaminetetraacetic acid (EDTA) with metals such as copper (Cu) and nickel (Ni) (denoted here as Cu-EDTA and Ni-EDTA), are common contaminants in wastewaters from chemical and plating industries. In this study, a multi-electrode (ME) system using a two-chamber reactor and two pairs of electrodes is proposed for simultaneous electrochemical oxidation of a wastewater containing both Cu-EDTA and Ni-EDTA complexes as well as separation and selective recovery of Cu and Ni onto two different cathodes via electrodeposition. Our results demonstrate that the ME system successfully achieved 90% EDTA removal, 99% solid Cu recovery at the Cu recovery cathode and 56% Ni recovery (33.3% on the Ni recovery cathode and 22.6% in the solution) after a four-hour operation. The system further achieved 85.5% Ni recovery after consecutive five cycles of operation for 20 h. While Cu removal was mainly driven by the direct reduction of EDTA-complexed Cu(II) at the cathode, oxidation of EDTA within the Ni-EDTA complex at the anode was a prerequisite for Ni removal. The oxidation of metal-bound EDTA and free EDTA was driven by •OH and direct electron transfer on the PbO2 anode surface and graphite anode, respectively. We further show that ME system performs well for all pH conditions, treatment of real wastewaters as well as wastewaters containing other metals ions (Cr and Zn) along with Cu/Ni. The separation efficiency of Cu and Ni is dependent on applied electrode potential as well as nature and concentration of binding ligand present with comparatively lower separation efficiency achieved in the presence of weaker binding capacity and/or at lower ligand concentration and lower applied electrode potential. As such, some optimization of electrode potential is required depending on the nature/concentration of ligands in the wastewaters. Overall, this study provides new insights into the design and operation of EAOP technology for effective organic abatement and metal recovery from wastewaters containing mixtures of various metal-organic complexes.

Impact of Sinapic Acid on Bovine Serum Albumin Thermal Stability.

The thermal stability of bovine serum albumin (BSA) in Tris buffer, as well as the effect of sinapic acid (SA) on protein conformation were investigated via calorimetric (differential scanning microcalorimetry-μDSC), spectroscopic (dynamic light scattering-DLS; circular dichroism-CD), and molecular docking approaches. μDSC data revealed both the denaturation (endotherm) and aggregation (exotherm) of the protein, demonstrating the dual effect of SA on protein thermal stability. With an increase in ligand concentration, (i) protein denaturation shifts to a higher temperature (indicating native form stabilization), while (ii) the aggregation process shifts to a lower temperature (indicating enhanced reactivity of the denatured form). The stabilization effect of SA on the native structure of the protein was supported by CD results. High temperature (338 K) incubation induced protein unfolding and aggregation, and increasing the concentration of SA altered the size distribution of the protein population, as DLS measurements demonstrated. Complementary information offered by molecular docking allowed for the assessment of the ligand binding within the Sudlow's site I of the protein. The deeper insight into the SA-BSA interaction offered by the present study may serve in the clarification of ligand pharmacokinetics and pharmacodynamics, thus opening paths for future research and therapeutic applications.

Pressure and Composition Effects on a Common Nanoparticle Ligand-Solvent Pair.

The effect of pressure on the properties of nanoparticles is a growing area of investigation. These measurements are typically performed in a colloidal suspension; however, pressure-induced changes in the interactions between the nanoparticle surface and the solvent are often neglected. Here, we report vibrational spectroscopy of a common nanoparticle ligand, 1-dodecanethiol, and a common solvent, toluene, under pressure. We find that the pressure-induced phase change of the 1-dodecanethiol is altered by the presence of toluene and that change depends on the concentration of the free ligand in the solution. At near-equal concentrations, phase segregation is observed and the dodecanethiol crystallizes independently from the toluene. On the other hand, at unequal concentrations, concerted phase transitions are observed in the dodecanethiol and toluene, and a disordered conformation of dodecanethiol is maintained under much higher pressures. These results shed light on the pressure-induced changes in intermolecular interactions between nanoparticle ligands and solvents, which must be considered in the design of high-pressure investigations of colloidal nanoparticles.

Sulfhydryl-mediated etching suppression of gold nanostars for rapid and sensitive detection of bacterial pathogens

Human infectious diseases caused by bacterial pathogens, such as meningitis and pyaemia, threaten the public health worldwide due to their acute onset and high mortality. Sensitive and rapid detection of bacterial pathogens is urgent for the treatment of infectious diseases clinically. However, current techniques are generally time-consuming and require large-scale equipment. Plasmonic nanosensors built on metallic nanomaterials have emerged as excellent tools for biomedical diagnostics. Herein, we report an etching suppression strategy for the sensitive and rapid detection of bacterial pathogens through gold nanostars. Sulfhydryl-containing ligands suppress the iodide-mediated surface etching of gold nanostars, depending on the type, concentration, and size of sulfhydryl-containing ligands. Using mercaptophenylboronic acid (MBA) and Pseudomonas aeruginosa (P. aeruginosa)-specific aptamer as multifunctional ligands, we specifically identify bacterial pathogens through sulfhydryl-mediated etching suppression with a linear detection range from 10 to 106 CFU/mL and a limit of detection of 2 CFU/mL. This etching suppression-based strategy enables the detection of Neisseria meningitidis in the cerebrospinal fluid and P. aeruginosa in the serum within 15 min, showing great potential as a point-of-care platform for clinical diagnosis.

Recommendations for best practice for iron speciation by competitive ligand exchange adsorptive cathodic stripping voltammetry with salicylaldoxime

The method of competitive ligand exchange followed by adsorptive cathodic stripping voltammetry (CLE-AdCSV) allows for the determination of dissolved iron (DFe) organic speciation parameters, i.e., ligand concentration (LFe) and conditional stability constant (log KFe′Lcond). Investigation of DFe organic speciation by CLE-AdCSV has been conducted in a wide range of marine systems, but aspects of its application pose challenges that have yet to be explicitly addressed. Here, we present a set of observations and recommendations to work toward establishing best practice for DFe organic speciation measurements using the added ligand salicylaldoxime (SA). We detail conditioning procedures to ensure a stable AdCSV signal and discuss the processes at play during conditioning. We also present step-by-step guidelines to simplify CLE-AdCSV data treatment and interpretation using the softwares ECDSoft and ProMCC and a custom spreadsheet. We validate our application and interpretation methodology with the model siderophore deferoxamine B (DFO-B) in a natural seawater sample. The reproducibility of our application and interpretation methodology was evaluated by running duplicate titrations on 19 samples, many of which had been refrozen prior to the duplicate analysis. Nevertheless, 50% of the duplicate analyses agreed within 10% of their relative standard deviation (RSD), and up to 80% within 25% RSD, for both LFe and log KFe′Lcond. Finally, we compared the sequential addition and equilibration of DFe and SA with overnight equilibration after simultaneous addition of DFe and SA on 24 samples. We found a rather good agreement between both procedures, with 60% of samples within 25% RSD for LFe (and 43% of samples for log KFe′Lcond), and it was not possible to predict differences in LFe or log KFe′Lcond based on the method applied, suggesting specific association/dissociation kinetics for different ligand assemblages. Further investigation of the equilibration kinetics against SA may be helpful as a potential way to distinguish natural ligand assemblages.

Regulation of mechanical force on cardiomyocytes beating

The mechanical behavior of cardiomyocytes plays an essential role in maintaining life and health. It is traditionally believed that both electrical signals and chemical signals modulate the cardiomyocytes behaviors. Recent discoveries have elucidated that the physical cues of microenvironment can regulate cell activities such as proliferation, spreading, migration, and differentiation. However, there is still limited research on regulating cardiomyocytes beating through mechanical force. Herein we prepare different polyacrylamide gels coated with different cell adhesion ligand proteins to simulate the physical microenvironment of cardiomyocytes. Then the mechanical loading forces are loaded by using a tungsten probe to stretch elastic hydrogels which can emulate the mechanical oscillations induced by the beating of adjacent cardiomyocytes. We investigate the responsive behavior of cardiomyocytes to external mechanical oscillations within various physical microenvironments. Firstly, we load 1 Hz mechanical oscillation on the matrix (<i>E</i> = 11 kPa) with different kinds and concentrations of ligands (0, 5, 20, 100 μg/mL) to stimulate cardiomyocytes and observe their mechanical response behavior. Our findings indicate that all kinds of ligands including Laminin, Fibronectin and Collagen I , can mediate the cardiomyocytes response to extrinsic mechanical oscillatory stimuli, which might be due to distinct mechanisms of mechanical force coupling (Fig. (b)). This suggests that mechanical force signals can regulate the beating of cardiomyocytes through matrix-ligand-cell signaling pathway, thereby inducing intercellular coupled oscillations for rhythmic control of cardiomyocytes. Cardiomyocytes cultured on the matrix coated with 20 μg/mL Laminin show the highest and most stable response fraction. We hypothesize that there exist dual force transduction pathways for Laminin binding to integrin and dystrophin glycoprotein complex (DGC) (Fig. (a)). We further analyze the cardiomyocytes behaviors under mechanical oscillation with different values of substrate stiffness (<i>E</i> = 1.8, 11, 27 kPa) and concentrations of Laminin (0, 5, 20, 100 μg/mL). We find that cardiomyocytes cultured on 1.8 kPa coated with 20 μg/mL Laminin show the highest response fraction (Fig. (c)). Our results demonstrate that the stiffness of substrate, the type and density of cell adhesion ligands, as well as the strength and rhythm of the mechanical signals can synergetically affect the cardiomyocytes responses to external mechanical stimulations, which provides the foundation for understanding the diseases such as cardiac arrhythmias and heart failure following myocardial infarction.

Water-induced controllable synthesis of CsPbBr3 nanorods/nanocubes from CsBr nanocrystals

We present a post-synthetic process for fabricating CsPbBr3 nanorods or nanocubes at room temperature via the transformation of CsBr nanocrystals via regulating water amount and the concentrations of ligands in PbBr2 solutions.

Chelation of [111In]In3+ with the dual-size-selective macrocycles py-macrodipa and py2-macrodipa.

Indium-111 (111In) is a diagnostic radiometal that is important in nuclear medicine for single-photon emission computed tomography (SPECT). In order to apply this radiometal, it needs to be stably chelated and conjugated to a targeting vector that delivers it to diseased tissue. Identifying effective chelators that are capable of binding and retaining [111In]In3+in vivo is an important research area. In this study, two 18-membered macrocyclic chelators, py-macrodipa and py2-macrodipa, were investigated for their ability to form stable coordination complexes with In3+ and to be effectively radiolabeled with [111In]In3+. The In3+ complexes of these two chelators were characterized by NMR spectroscopy, X-ray crystallography, and density functional theory calculations. These studies show that both py-macrodipa and py2-macrodipa form 8-coordinate In3+ complexes and attain an asymmetric conformation, consistent with prior studies on this ligand class with small rare earth metal ions. Spectrophotometric titrations were carried out to determine the thermodynamic stability constants (log KML) of [In(py-macrodipa)]+ and [In(py2-macrodipa)]+, which were found to be 18.96(6) and 19.53(5), respectively, where the values in parentheses are the errors of the last significant figures obtained from the standard deviation from three independent replicates. Radiolabeling studies showed that py-macrodipa and py2-macrodipa can quantitatively be radiolabeled with [111In]In3+ at 25 °C within 5 min, even at ligand concentrations as low as 1 μM. The in vitro stability of the radiolabeled complexes was investigated in human serum at 37 °C, revealing that ∼90% of [111In][In(py-macrodipa)]+ and [111In][In(py2-macrodipa)]+ remained intact after 7 days. The biodistribution of these radiolabeled complexes in mice was investigated, showing lower uptake in the kidneys, liver, and blood at the 24 h mark compared to [111In]InCl3. These results demonstrate the potential of py-macrodipa and py2-macrodipa as chelators for [111In]In3+, suggesting their value for SPECT radiopharmaceuticals.

Dependence of the size and number of silver nanoparticles on the ligand concentration in the reaction system

Dependence of the size and number of silver nanoparticles on the ligand concentration in the reaction system

Chemical recycling of bromine-terminated polymers synthesized by ATRP.

Chemical recycling of polymers is one of the biggest challenges in materials science. Recently, remarkable achievements have been made by utilizing polymers prepared by controlled radical polymerization to trigger low-temperature depolymerization. However, in the case of atom transfer radical polymerization (ATRP), depolymerization has nearly exclusively focused on chlorine-terminated polymers, even though the overwhelming majority of polymeric materials synthesized with this method possess a bromine end-group. Herein, we report an efficient depolymerization strategy for bromine-terminated polymethacrylates which employs an inexpensive and environmentally friendly iron catalyst (FeBr2/L). The effect of various solvents and the concentration of metal salt and ligand on the depolymerization are judiciously explored and optimized, allowing for a depolymerization efficiency of up to 86% to be achieved in just 3 minutes. Notably, the versatility of this depolymerization is exemplified by its compatibility with chlorinated and non-chlorinated solvents, and both Fe(ii) and Fe(iii) salts. This work significantly expands the scope of ATRP materials compatible with depolymerization and creates many future opportunities in applications where the depolymerization of bromine-terminated polymers is desired.

Kelvin probe force microscopy on patterned large-area biofunctionalized surfaces: a reliable ultrasensitive platform for biomarker detection.

Kelvin probe force microscopy (KPFM) allows the detection of single binding events between immunoglobulins (IgM, IgG) and their cognate antibodies (anti-IgM, anti-IgG). Here an insight into the reliability and robustness of the methodology is provided. Our method is based on imaging the surface potential shift occurring on a dense layer of ∼5 × 107 antibodies physisorbed on a 50 μm × 90 μm area when assayed with increasing concentrations of antigens in phosphate buffer saline (PBS) standard solutions, in air and at a fixed scanning location. A comprehensive investigation of the influence of the main experimental parameters that may interfere with the outcomes of KPFM immune-assay is provided, showing the robustness and reliability of our approach. The data are supported also by a thorough polarization modulation infrared reflection-absorption spectroscopy (PM-IRRAS) analysis of the physisorbed biolayer, in the spectral region of the amide I, amide II and amide A bands. Our findings demonstrate that a 10 min incubation in 500 μL PBS encompassing ≈ 30 antigens (100 zM) triggers an extended surface potential shift that involves the whole investigated area. Such a shift quickly saturates at increasing ligand concentration, showing that the developed sensing platform works as an OFF/ON detector, capable of assessing the presence of a few specific biomarkers in a given assay volume. The reliability of the developed methodology KPFM is an important asset in single molecule detections at a wide electrode interface.

Chiroptically active quantum nanonails.

In recent years, extensive research efforts have been dedicated to the investigation of CdSe/CdS-based quantum-confined nanostructures, driven by their distinctive properties. The morphologies of these nanostructures have been shown to directly affect their properties, an area which has proven to be an important field of study. Herein, we report a new morphology of CdSe/CdS core-shell heterostructures in the form of a 'nanonail' - a modified nanorod-like morphology, in which a distinctive triangular head can be observed at one end of the structure. In-depth studies of this morphology reveal a material with tuneable rod length and width, as well as exceptional photoluminescent properties. Following this, we have demonstrated the ability to induce chiroptical activity via ligand exchange, revealing the important role of the specific morphology, shell thickness and chiral ligand concentration in the effect of ligand induced chirality. In addition, the cellular uptake and cytotoxicity of obtained chiral nanostructures were evaluated on human lung-derived A549 cancer cells, revealing a significant enantioselectivity in biological activity. Finally, analysis on monolayers of the material demonstrate the complete absence of FRET processes. Overall, this CdSe/CdS heterostructure is another tuneable morphology of a very important nanomaterial, one which shows great advantages and a range of potential applications.

Kinetic features of solvent extraction by N,O-donor ligands of f-elements: a comparative study of diamides based on 1,10-phenanthroline and 2,2'-bipyridine.

A variant of microfluidic setup design for the study of extraction kinetics has been proposed. Mass transfer constants for Am(III) and Eu(III) and observed rate constants were obtained for N-,O-donor ligands featuring phenanthroline and bipyridyl cores. The possibility of determining rate constants for cations independently of each other makes it possible to observe the kinetic effect of separation. The extraction rate was found to be lower for the bipyridyl ligand, compared to phenanthroline. The values of the rotation barriers for the ligands were calculated using the DFT method. The values correlate with the obtained low extraction rate for the bipyridyl ligand. Also, crystallographic data showing anti-conformation for the bipyridyl ligand align with the kinetic data. Surface tension was also determined for the systems with the studied ligands. It is shown that at equal ligand concentrations, the value of surface tension agrees with the extraction rate. Furthermore, it is shown that for the bipyridyl ligand, prior contact of the organic phase with nitric acid significantly affects the surface tension.

GPR55 inhibits the pro-adipogenic activity of anandamide in human adipose stromal cells

The endocannabinoid anandamide (AEA) stimulates adipogenesis via the cannabinoid receptor CB1 in adipose stromal cells (ASCs). However, AEA interacts also with nonclassical cannabinoid receptors, including transient receptor potential cation channel (TRPV)1 and G protein-coupled receptor (GPR)55. Their roles in AEA mediated adipogenesis of human ASCs have not been investigated.We examined the receptor-expressions by immunostaining on human ASCs and tested their functionality by measuring the expression of immediate early genes (IEGs) related to the transcription factor-complex AP-1 upon exposition to receptor agonists. Cells were stimulated with increasing concentrations of specific ligands to investigate the effects on ASC viability (proliferation and metabolic activity), secretory activity, and AEA mediated differentiation.ASCs expressed both receptors, and their activation suppressed IEG expression. TRPV1 did not affect viability or cytokine secretion. GPR55 decreased proliferation, and it inhibited the release of hepatocyte growth factor. Blocking GPR55 increased the pro-adipogenic activity of AEA. These data suggest that GPR55 functions as negative regulator of cannabinoid mediated pro-adipogenic capacity in ASCs.

Removal of manganese (II) in water samples by the aeration-filtration process and determination based on 5-Br-PADAP ligand by cathodic stripping voltammetry

In this study, manganese (Mn II) was determined in aqueous media by an electrochemical method, and its removal was evaluated using the aeration-filtration process (AFP). An electrochemical sensor based on carbon paste (EPC) modified with the 5-Br-PADAP ligand was used to measure Mn (II) in aqueous media. Through the optimization of analytical parameters in cathodic stripping voltammetry (CSV), real boreholes and well water samples could be analyzed for manganese content. The optimum parameters such as preconcentration potential (1100 mV), preconcentration time (240s), 5-Br-PADAP ligand concentration (20 µmol L-1), and electrode rotation speed during pre-concentration (1000 rpm) were studied and optimized. The detection limit (LOD) is estimated at 3 ´10-7 mol L-1 with a relative standard deviation (RSD) of 3.36%. The real samples showed that some water points have more concentration than the standard. A simple, effective, inexpensive, and rural-friendly method was used for treating manganese-rich water. Following the aeration phase, the sand and gravel column was filtered to remove manganese (II) from the water. The removal efficiency of Mn was obtained at a rate of 74.8- 84.5% and more than 95% after two hours of aeration and 1 hour at pH 8 for real samples.

Identification of metabolic biomarkers of chronic vagus nerve stimulation (VNS) in subjects with drug-resistant epilepsy (DRE).

Neuromodulation by means of vagus nerve stimulation (VNS) therapy, reduces seizure frequency and improves quality of life in subjects with drug-resistant epilepsy (DRE), yet its molecular mechanism remains unclear. This study investigates the impact of chronic VNS on lipid bioactive metabolites and fatty acids (FA) in the plasma and red blood cells of seven subjects with DRE. By measuring expression levels of peroxisome proliferator-activated receptor α (PPARα) and sirtuin1 (SIRT1) genes-key regulators in energy and lipid metabolism-and lipid profiles before and after various stages of VNS, this study identifies potential mechanisms by which VNS may reduce seizure frequency. Blood samples collected before VNS device implantation, after acute VNS stimulus, and following gradual intensity increments up to therapeutic levels revealed that VNS increases SIRT1 and PPARα expression and erythrocyte concentrations of PPARα ligands. Additionally, we observe reduced de novo lipogenesis biomarkers in erythrocytes, indicating that VNS may influence systemic lipid and energy metabolism. Our findings suggest that VNS could enhance neuronal function by modulating energy metabolism, thus potentially reducing seizure frequency in subjects with DRE. Future research targeting SIRT1 and PPARα may provide innovative therapeutic strategies for managing DRE. Plain Language Summary: The exact mechanism of VNS is still unknown. This study investigated the effects of VNS Therapy on energetic metabolism, suggesting possible novel biomarkers for DRE subjects and neuromodulation therapies.

Molecular determinants of ligand efficacy and potency in GPCR signaling.

Heterotrimeric guanine nucleotide-binding protein (G protein)-coupled receptors (GPCRs) bind to extracellular ligands and drugs and modulate intracellular responses through conformational changes. Despite their importance as drug targets, the molecular origins of pharmacological properties such as efficacy (maximum signaling response) and potency (the ligand concentration at half-maximal response) remain poorly understood for any ligand-receptor-signaling system. We used the prototypical adrenaline-β2 adrenergic receptor-G protein system to reveal how specific receptor residues decode and translate the information encoded in a ligand to mediate a signaling response. We present a data science framework to integrate pharmacological and structural data to uncover structural changes and allosteric networks relevant for ligand pharmacology. These methods can be tailored to study any ligand-receptor-signaling system, and the principles open possibilities for designing orthosteric and allosteric compounds with defined signaling properties.

State-of-the-art with the prospects of cobalt-based metal-organic frameworks for solar cell applications

The characteristics of metal–organic framework (MOF) composites make them the most significant materials for energy conversion applications. MOFs are hybrid molecular frameworks synthesized using metal ions like Copper, Cobalt, Zinc, Nickel, etc and organic ligands such as BTC, NDC, etc. To meet and fulfill futuristic energy demands and needs, it is feasible to expand cost-effective energy conversion solar cell devices using MOF materials, therefore in the present work, the Cobalt-based MOFs (Co-MOF) are synthesized by coordinating Cobalt nitrate and 1,3,5 Benzene tricarboxylic acid (BTC or Trimesic acid) ligand using the Solvothermal method. To study the physiochemical properties of synthesized Co-BTC MOFs, these have gone through a variety of characterization processes where the structural exploration unveils that the intensity of the dominant peak obtained at 18.7° gradually decreases with a decrease in the concentration of trimesic acid ligand. First and second weight losses, corresponding to release of the solvent molecules and breakdown of the frameworks, respectively, were detected by thermogravimetric analysis (TGA) measurements. In the FTIR spectra, metal-oxide, modified benzene, carboxylic, and hydroxyl groups with different modes of vibrations are observed. Analysis of surface morphology demonstrated creation of rod-like geometry to the synthesized materials, whereas elemental studies inveterate effective formation of the Co-BTC MOFs. Additionally, the optimized Co-BTC MOF is applied as a potential interfacial layer in solar cells and the outcome implies that the device designed with 10 Co-BTC LBL cycle evolutions provided relatively desirable solar cell performance parameters. The present findings recommended that material progression is necessary to develop cost-effective and high-performance MOF-based solar cell devices.

Gelatin-tyramine addition and low hydrogel density improves cell attachment, migration, and metabolic activity in vitro and tissue response in vivo in enzymatically crosslinkable dextran-hyaluronic acid hydrogels

Hydrogels are receiving increasing attention for their use in 3D cell culture, tissue engineering, and bioprinting applications. Each application places specific mechanical and biological demands on these hydrogels. We developed a hydrogel toolbox based on enzymatically crosslinkable polysaccharides via tyramine (TA) moieties, allowing for rapid and tunable crosslinking with well-defined stiffness and high cell viability. Including gelatin modified with TA moieties (Gel-TA) improved the hydrogels' biological properties; 3 T3 fibroblasts and HUVECs attached to and proliferated on the enriched hydrogels at minute Gel-TA concentrations, in contrast to bare or unmodified gelatin-enriched hydrogels. Moreover, we were able to switch HUVECs from a quiescent to a migratory phenotype simply by altering the ligand concentration, demonstrating the potential to easily control cell fate. In encapsulation studies, Gel-TA significantly improved the metabolic activity of 3 T3 fibroblasts in soft hydrogels. Furthermore, we showed rapid migration and network formation in Gel-TA enriched hydrogels in contrast to a non-migratory behavior in non-enriched polysaccharide hydrogels. Finally, low hydrogel density significantly improves tissue response in vivo with large infiltration and low fibrotic reaction. Further development by adding ECM proteins, peptides, and growth factor adhesion sites will lead to a toolbox for hydrogels tailored toward their desired application.