Graphene Nanoplatelets Content Research Articles

Utilizing Binary Phase Segregation and Extrusion to Enhance the Electronic Properties of Graphene Nanocomposites.

Our goal in this study is to incorporate graphene nanoplatelets (GNPs) in a polymer blend of poly(lactic acid) (PLA) and isotactic polypropylene (iPP) to facilitate the dispersion of GNPs and use the morphology of phase segregation to create a pathway for concentrating GNPs to achieve percolation with lower GNP concentration. Investigating the interfacial properties between PLA/GNPs and iPP/GNPs, we noticed that iPP has a lower contact angle on GNPs compared to PLA on GNPs. This showed a great potential that the GNP are easily confined in iPP rather than in PLA domains or at the PLA/PP interfaces. Utilizing this property, as the PLA content increases, the iPP content decreases, resulting in a reduction of the available space for GNPs. This decrease in space leads to a higher chance for GNPs to accumulate together. Furthermore, through careful control of the concentration in the immiscible blend of PLA/PP, it is possible to achieve a bicontinuous structure. This structure facilitates the creation of a pathway for the fillers, allowing for the use of minimal GNPs while achieving optimal electrical conductivity properties. The PLA/PP/GNPs can be oriented by the shear forces coming from the nozzle that produce a higher performance.

Infrared on-site heating for material extrusion additive manufacturing of carbon fiber filled polyphenylene sulfide and its nano-graphene-reinforced alternatives

This study investigates the impact of infrared heating and annealing on the mechanical properties of carbon fiber-reinforced polyphenylene sulfide (CF-PPS) and graphene nanoplatelet (GNP)-reinforced CF-PPS composites in Material extrusion (MEX) additive manufacturing. GNP/CF-PPS composites are prepared by mechanically mixing CF-PPS plastic particles with GNP particles and subjecting them to infrared heating and annealing treatments during the three-dimensional (3D) printing process. Three-point bending tests assess the mechanical properties of the samples. The results reveal that the 0.03 wt.% GNP/CF-PPS sample, subjected to infrared heating followed by annealing, exhibits a 30% increase in bending strength compared to pure CF-PPS, demonstrating that the combined treatment significantly enhances mechanical performance. Microscopy observations using a Keyence VH7000 digital optical microscope and a scanning electron microscope (SEM) confirm that GNP addition and infrared irradiation lead to reduced surface roughness and fewer fracture cross-sectional pores. The interlayer bonding improves notably, indicating enhanced internal density and structural stability. Furthermore, differential scanning calorimetry analysis shows a 20% increase in crystallinity for heat-treated samples, contributing to better interlaminar bonding and reduced temperature gradients during printing. Finite element simulations using MATLAB and ABAQUS software corroborate these findings, demonstrating that infrared heating proves more effective than varying GNP content alone in reducing deformation, residual stress, and temperature differences during the MEX process. These results provide valuable insights into improving the mechanical properties and stability of MEX-manufactured large-dimensional composite materials through optimized thermal management.

Transport and magnetic properties of [formula omitted]/Graphene nanoplatelets nanocomposites

A series of Zn0.5Co0.25Cu0.25Ho0.037Fe1.963O4 (ZCCHF)/Graphene nanoplatelets (GNPs) nanocomposites (where GNPs = 0 wt%, 1.25 wt%, 2.5 wt%, 3.75 wt%, 5 wt%) were prepared via sol-gel auto-combustion (SGAC) method followed by bath sonication and studied their structural, morphological, optical, dielectric, and magnetic properties. The structural analysis confirmed a single-phase crystal matrix of all the as-prepared nanocomposites. The optical analysis revealed that the energy bandgap (Eg) lies within the range of 1.57 eV–1.62 eV. The dielectric analysis showed that the improvement in the dielectric constant (ε′) and reduction in dielectric tangent loss (tan δd) with increasing GNPs concentration from 0 wt% to 5 wt%. The real part of permeability (μ′) was improved and magnetic tangent loss (tan δM) was reduced with the addition of GNPs. Magnetic properties were studied at different temperatures (5 K, 300 K, and 400 K), and observed high saturation magnetization (MS), and coercivity (HC) at a low temperature (at 5 K). The low MS, and HC values were observed at high temperatures (300 K and 400 K). The combination of improved dielectric and tunable magnetic properties makes ZCCHF/GNPs nanocomposites promising candidates for applications in spintronics, high-frequency magnetic devices, and advanced electronic systems.

Dielectric, low‐frequency noise and mechanical properties of hybrid carbon nanotubes/graphene nanoplatelets epoxy composites

AbstractThis study analyzes the electrical, microwave (26–37 GHz), low‐frequency (20 Hz–10 kHz) noise, and mechanical properties of epoxy hybrid composites filled with multi‐walled carbon nanotubes (MWCNT) and graphene nanoplatelets (GNP). The system's percolation threshold was around 0.25 vol.% MWCNT, while the electromagnetic properties were almost independent of GNP concentration. The composites are shown to be suitable for electromagnetic shielding in the 26–37 GHz range, with microwave absorption increasing as the total nanocarbon concentration rises. The electrical transport in these composites is governed by one‐dimensional Mott hopping at low temperatures (below 245 K) and redistribution effects above room temperature. The low‐frequency voltage noise spectra of the composites are predominant of the 1/f component, with noise spectral density proportional to Ub, where the exponent b is close to 2, indicating noise caused by resistance fluctuations. The optimal electromagnetic properties are near 0.5 vol.% MWCNT and 0.25 vol.% GNP concentrations. The tensile elastic modulus and yield strength showed the highest increases at 0.25/0.25 loading, with gains of 40.43% and 16.77%, respectively, compared to neat epoxy. Fracture toughness and energy release rate increased with adding 0.25 vol.% GNP, while Charpy impact strength improved with higher MWCNT loading.Highlights Percolation threshold in hybrid MWCNT/GNP composites is close to 0.25 vol.% MWCNT Low‐frequency voltage noise spectra of the composites are 1/f type

Impact of Soybean Biodiesel Blends with Mixed Graphene Nanoparticles on Compression Ignition Engine Performance and Emission: An Experimental and ANN Analysis

The extensive use of fuels in power generation plants, industries, and transportation has led to a scarcity of fossil fuels and has contributed to global warming. This has prompted researchers to focus on improving internal combustion engine performance, as the transportation system accounts for 50% of global fuel consumption. Soybean biodiesel plays a vital role in reducing emissions and fuel consumption in engines. In the current work, a blend of soybean oil is used as a biodiesel (B20, B40, and B60), with and without the addition of graphene nanoplatelets (GNPs) examined on a constant-speed compression ignition (CI) engine with respect to pure diesel. The blends are denoted as B20GNP10, B20GNP20, B20GNP40, B20GNP60, B20GNP80, and B20GNP100, according to their proposition of biodiesel and graphene nanoplatelets. Similar blends were prepared for B40 and B60 combinations with similar GNPs concentrations. The prepared blend properties were measured, and good thermophysical properties were found. The trial includes testing the engine emissions and performance at altering loads ranging from 0 to 12 kg for all blends. The artificial neural network (ANN) tool is used to forecast the accuracy of experimental results. Compared to pure diesel, the B60GNP100 blend at 12 kg load condition showed the lowest brake specific fuel consumption at 12.58 % and the highest brake thermal efficiency at 27.13%. Emissions were estimated using a gas analyzer, and the outcomes indicated that the biodiesel blends have controlled levels of CO, CO2, NOx, and HC compared to pure diesel. The ANN model with 99.99% accuracy was developed using experimental data, confirming the accuracy of the experimental results with lower simulation time and cost. Additionally, the B60GNP100 blend yielded better results compared to previous studies.

Effect of graphene on mechanical and anti-corrosion properties of TiO2-SiO2 sol-gel coating

PurposeThis paper aims to explore how graphene can improve the mechanical and anti-corrosion properties of TiO2-SiO2 sol-gel coating. This sol-gel coating has been prepared on aluminum alloy substrate using graphene as both nano-filler and corrosion inhibitor.Design/methodology/approachTo examine the effect of graphene on mechanical properties of sol-gel coating, the abrasion resistance, adhesion strength and scratch resistance of coating have been evaluated. To reveal the effect of graphene on the anti-corrosion property of coating for aluminum alloy, the electrochemical impedance spectroscopy (EIS) has been conducted in 3.5 Wt.% NaCl medium.FindingsScanning electron microscopy images indicate that graphene nanoplatelets (GNPs) have been homogeneously dispersed into the sol-gel coating matrices (at the contents from 0.1 to 0.5 Wt.%). Mechanical tests of coatings indicate that the graphene content of 0.5 Wt.% provides highest values of adhesion strength (1.48 MPa), scratch resistance (850 N) and abrasion strength (812 L./mil.) for the sol-gel coating. The EIS data show that the higher content of GNPs improve both R1 (coating) and R2 (coating/Al interface) resistances. In addition to enhancing the coating barrier performance (graphene acts as nanofiller/nano-reinforcer for coating matrix), other mechanism can be at work to account for the role of the graphene inhibitor in improving the anticorrosive performance at the coating/Al interface.Originality/valueApplication of graphene-based sol-gel coating for protection of aluminum and its alloy is very promising.

The use of graphene nanoplatelets for enhancement of the compressive strength of mortar containing high-levels of natural Pozzolan

High Pozzolan concrete has an extended setting time and inhibits early-age compressive strength development, which can cause construction delays and limit its application in the concrete industry. The main aim of this study is to evaluate the effectiveness of graphene nanoplatelets (GNPs) in enhancing the mechanical properties of mortar containing high levels of natural Pozzolan. In the beginning, a relatively simple ultrasonication treatment process produced an almost uniform dispersion of GNPs in the mixing water to avoid agglomeration which limits the efficiency of GNPs. Tests on engineering properties indicated that the compressive strength of mortar containing 40 and 60 % natural Pozzolan as a partial replacement of cement was enhanced with the addition of the optimum content of graphene nanoplatelets which was found to be 0.03 % and 0.01 % by weight of binder at 40 % and 60 % cement replacement levels, respectively. The compressive strength was enhanced by 29.6 %, 27.4 %, and 27.5 % at 40 % cement replacement level, and by 86.3 %, 23.7 %, and 25.8 % at 60 % cement replacement level at 7, 28, and 56 days of curing, respectively. SEM investigations indicated that the addition of GNPs densified the structure thus enhancing the performance of mortar.

Rheological, mechanical, and environmental performance of printable graphene-enhanced cementitious composites with limestone and calcined clay

As extrusion-based 3D concrete printing gains wider acceptance in construction, there is a growing imperative to incorporate supplementary cementitious materials (SCMs) into printable mixtures to address their high cement content and promote sustainability. Conventional SCMs like fly ash and slag are becoming increasingly scarce, underscoring the need for alternative solutions such as limestone and calcined clay. Additionally, the utilization of nanomaterials in printable mixtures holds potential for enhancing the mechanical properties of 3D printed structures. These properties are often compromised by interlayer interfaces and void formations during printing, resulting in lower mechanical performance compared to conventionally cast concrete. Graphene nanoplatelets (GNPs), with their high aspect ratios and exceptional mechanical characteristics, offer promising avenues for reinforcing printable cementitious composites. This study explores the rheological, mechanical, and environmental aspects of graphene-enhanced cementitious composites incorporating limestone and calcined clay. Graphene nanoplatelets (GNPs) were dispersed utilizing a surfactant-assisted sonication technique, and their dispersion characteristics were evaluated through absorbance, particle size, and zeta potential measurements. Then, the influence of varying GNP concentrations on the rheological properties of limestone-calcined clay (LC2) cementitious composites was assessed. Compressive and flexural strength tests were conducted on 3D-printed LC2 samples with different GNP ratios, alongside cast specimens for comparison. Microstructural examination of failed specimens was performed using scanning electron microscopy. Furthermore, a life cycle assessment was conducted to compare the environmental impacts of printable LC2 mixtures to conventional printable mixtures. Incorporating GNPs at a ratio of 0.05 % by weight of cement in printable LC2 mixtures enhances compressive strength by 23 %, leading to a reduction of approximately 31 % in environmental impacts compared to conventional printed mixtures.

Interfacial bonding mechanism of graphene nanoplatelets reinforced AZ91D magnesium alloy prepared by semi-solid injection molding

The incompatibility between the strength and thermal conductivity of magnesium alloys limits their application in heat dissipation components. Magnesium matrix composites were obtained by adding reinforcements into the AZ91D alloy to achieve synergistic enhancement of mechanical and thermal conductivity to promote the application of magnesium alloy. Graphene nanoplatelets (GNPs) reinforced magnesium matrix composites were successfully prepared by semi-solid injection molding. The high viscosity of the semi-solid metal slurry contributes to the homogeneous dispersion of GNPs in the magnesium matrix. A GNPs/MgO/Mg heterostructure with high interfacial bonding strength was found at the interface of GNPs and α-Mg matrix. The semi-solid casting method improves the mechanical properties of the composites by grain refinement and simultaneously reduces the thermal conductivity. The addition of GNPs can balance the mechanical and thermal conductivity enhancement, and the most balanced properties of the composites are obtained when the content of GNPs is 0.3 wt%, with a tensile strength of 243.1 MPa, Vickers hardness of 93.7 HV, and thermal conductivity of 74.8 W/(m·K). Therefore, the semi-solid forming method is considered a promising processing method, and GNPs is considered an ideal reinforcement material to improve the performance of the magnesium matrix.

Failure investigation of woven scarf-repaired laminates reinforced with nanoparticles: Experimental and numerical investigations

This study explores the efficacy of multi-walled carbon nanotubes (MWCNTs) and graphene nanoplatelets (GNPs) as nano-reinforcement for the epoxy adhesive layer in scarf joints and 3D scarf-repaired laminates subjected to tensile loading. Experimental characterization of pure epoxy and nanocomposite mechanical properties was validated using the Mori–Tanaka method (incorporating agglomeration effects). A 3D finite element model considering material non-linearity and strain-based damage was employed to investigate joint failure behaviour, validated for 0.5 vol% MWCNT and GNP concentrations. A subsequent parametric study explored the influence of scarf angle, nanoparticle concentration, and patch configuration on 3D repaired specimens. The results suggest a 2.86° scarf angle with a [(+45/−45)]4s patch configuration reinforced with 1 vol% MWCNTs and 0.5 vol% GNPs exhibits the highest tensile strength improvement.

Tribological manufacturing of ZDDP tribofilms functionalised by graphene nanoplatelets

Abstract 3D Tribo-Nanoprinting (3D TNP), which uses a highly controllable tribological contact to deposit tribofilms, has been proposed as a manufacturing method for nanoscale structures. Inspired by this, we show for the first time, as a proof of concept, the ability to electrically functionalise tribofilms for potential use in the manufacture of structures with nanoscale thickness. Zinc dialkyldithiophosphate (ZDDP) tribofilms have been generated to include varying concentrations of graphene nanoplatelets (GNPs) resulting in them becoming electrically conductive when tested using conductive atomic force microscopy. In its highest GNP concentration, approximately 55% of the surface of the tribofilm was able to sustain current up to a threshold of 245 pA. The higher graphene content led to a suppression in film formation and decreased substrate coverage. Transmission electron microscopy revealed a dual-layered tribofilm with a carbon-rich layer above a pure layer of ZDDP tribofilm. Within the carbon-rich layer, the GNPs formed into scrolls which created an internal network through which current could flow, being limited by the insulating pure ZDDP layer at the film-substrate interface, and the presence of surface graphene sheets. A modified lateral force microscopy procedure supported the presence of surface graphene sheets. Despite limited deposition precision in terms of homogeneity and distribution of the tribofilms, this work provides a step towards the use of 3D TNP for the manufacture of electronic structures on the nanoscale by proving that tribofilms can be functionalised by the addition of particle additives.

EXPERIMENTAL INVESTIGATION OF AMINE-BASED GRAPHENE NANOSUSPENSION FOR CO2 ABSORPTION

Absorption is the most widely used carbon dioxide (CO2) removal technology. The CO2 absorption performance of monoethanolamine (MEA), the most commonly used CO2 absorbent, can be improved by suspending nanoparticles. This work examined the performance of graphene nanoplatelets (GNPs) as additives to enhance CO2 absorption in MEA. The GNPs were characterized by HRTEM, FTIR, and XRD. The study examined the influence of GNP concentrations on CO2 absorption at room temperature. The images from HRTEM confirmed that the implemented graphene consists of several layers of graphene sheets. Increasing the loading of particles increased the solubility of CO2 until the optimum concentration was reached. From this work, it is evident that incorporating GNPs into MEA enhances the CO2 absorption performance of MEA. Thus, the addition of nanoparticles to the absorbent can enhance its CO2 absorptivity.

Enhancing the electrochemical properties of biopolymer composites using starch‐graphene nanoplatelets

AbstractThe study presents the ideal distribution of graphene nanoplatelets (GNP) within the thermoplastic starch (TPS) matrix significantly elevated the thermal and electrical conductivities, as well as the electrochemical efficiency of the biocomposites. Additionally, the incorporation of GNP resulted in an increased thermal stability for the TPS, as indicated by the elevated temperatures required for maximum degradation. The biocomposites exhibited a self‐aligned layered structure, creating conductive pathways and enhancing electron conduction. An electrical conductivity increased as the concentration of GNP increased, with the highest conductivity observed on the top and bottom surface with the value of 4.23 × 10−7 S/m and 3.92 × 10−6 S/m when 12 wt% of GNP was added. The presence of hydroxyl groups in TPS facilitated the formation of hydrogen bonds with GNP, preventing GNP from stacking and forming a more uniform conductive network within the film. The addition of 15 wt% GNP also improved the capacitive performance of the TPS matrix, as evidenced by higher current responses and larger quasi‐rectangular areas in the cyclic voltammetry curves compared to neat TPS. The Nyquist plots which are illustrated impedance data showed that the TPS film with 12 wt% GNP exhibits the smallest semicircle, indicating the highest conductivity which is suggested that GNP improves charge transfer compared to pure TPS.Highlights Optimal dispersion of GNP enhanced the biocomposite's properties. The electrical conductivity increases with the GNP content until 12 wt%. TPS/GNP self‐aligned layered improved conduction and capacitive behavior. GNP improved thermal stability by restricting polymer chain movement. Electrochemical impedance shows improved properties of TPS/GNP.

Vat photopolymerization of polymer composites with printing-direction-independent properties

The implementation of additive manufacturing techniques for thermal management applications necessitates the development of printable materials with enhanced properties. This study focuses on enhancing the thermal and mechanical properties of 3D-printed polymer composites (UV-based vat photopolymerization; VPP), starting by loading graphene nanoplatelets (GNP) as fillers into a monomer solution. GNP stabilization in the solution is achieved via the addition of sepiolite, a fiber-like clay, that traps them in dispersion. However, the inherent GNP-UV blocking limits its concentration in the VPP-printed composite, and its 2D nature yields parts with undesired anisotropic properties. We overcome this GNP concentration limit by using the excluded volume approach, namely, adding micron-sized diamonds to increase the GNP effective concentration. This approach also transforms the anisotropic VPP-printed composite into an isotropic structure, ensuring consistent thermal and mechanical enhancement regardless of the printing direction. Thermal conductivity (TC) and fracture toughness (FT) are enhanced by 180 % and 100 %, respectively (vs. the neat polymer). However, the electrical conductivity (EC) is also enhanced, which is undesirable in thermal management systems (risk of short-circuiting). Therefore, hexagonal boron nitride is added to reduce the EC, producing composites with enhanced TC and 140 % FT enhancement. Our approach holds promise for various applications, especially in advanced heat management solutions, where enhanced TC, light weight, and low EC are imperative.

Improved magnetic, electrical, and dielectric characteristics of graphene nano-platelets (GNPs)-Integrated Ni0·4Cd0·6Fe1.97Sm0.03O4 ferrite composites synthesized via sol-gel auto-combustion method

This research work analyzes the impact of graphene nanoplatelets (GNPs) on the structural, electrical, dielectric, optical, and magnetic properties of the Ni0·4Cd0·6Fe1.97Sm0.03O4/x-GNPs (SNCF/GNPs) composites (x = 0 %, 2.5 %, and 5 %) prepared via the sol-gel auto-combustion route. The results revealed that SNCF particles were distributed on GNPs which improved the multifaceted properties of SNCF spinel ferrites. XRD analysis confirmed the FCC spinel structure with a minimum crystallite size (D) of 18.99 nm for sample with 5 wt %GNPs. The DC electrical resistivity decreased from 9.06 × 1011 Ω-cm at 313K to 1.41 × 108 Ω-cm at 673K, revealing the semi-conducting nature of composites. The improved electroconductivity and reduced bandgap energy are observed for samples with minimum resistivity 1.02 × 105 Ω-cm at 673K and 1.70 eV energy, respectively, containing 5 wt %GNPs. Samples show higher permittivity values at low frequency and decreased at high frequency. The maximum ac conductivity is observed for composite with 5 wt %GNPs which is attributed to the hopping mechanism. Finally, the magnetization (Ms) increased from 52.24 to 79.71 emu/g with increasing GNPs contents. Hence, the synthesized composites with 5 wt %GNPs are more favorable than the pure sample for application in waste-water treatment, high-frequency devices, and energy storage devices.

Investigating the potential of powder metallurgy for fabricating graphene nanoplatelets reinforced copper nanocomposites

Copper (Cu) is highly sought for its excellent electrical and thermal conductivity. However, its limited mechanical strength hinders its wider application in demanding fields. This work explores the potential of graphene nanoplatelets (GNPs) as a strengthening agent for Cu. Cu-GNP composites with varying GNP content (0.1–1.5 wt%) were fabricated using a combined ball milling and powder metallurgy approach. The microstructure and mechanical properties of the composites were comprehensively analyzed using field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), and Raman spectroscopy. Compared to pure Cu, the Cu-GNP composites showcased significantly improved mechanical performance. Notably, the Cu-1.0 wt% GNP composite exhibited a remarkable ∼27% and ∼53% enhancement in compressive strength and micro-hardness, respectively. This improvement is attributed to the effective load transfer between Cu and well-dispersed GNPs, which act as reinforcement elements and inhibit dislocation movement. These findings demonstrate the promising potential of Cu-GNP composites for applications requiring high strength.

Enhancing Wear Resistance and Mechanical Behaviors of AA7020 Alloys Using Hybrid Fe3O4-GNP Reinforcement

This study investigates the effect of graphene nanoplatelets (GNPs) and milling duration on the microstructure, mechanical properties, and wear resistance of the AA7020 alloy reinforced with Fe3O4 and GNP. The composites were prepared with a fixed 10 wt.% Fe3O4 and varying GNP contents (0.5 and 1 wt.%) using high-energy ball milling for 4 and 8 h, followed by hot pressing. The aim was to enhance the performance of the AA7020 alloy for potential use in defense, automotive, aviation, and space applications, where superior mechanical properties and wear resistance are required. The results showed that the incorporation of 0.5 wt.% GNP and optimized milling significantly improved the composite’s performance. The AA7020 + 10 wt.% Fe3O4 + 0.5 wt.% GNP composite achieved the highest density (99.70%) when milled for 4 h. Its hardness increased with both the inclusion of GNP and extended milling duration, with the composite milled for 8 h exhibiting the highest hardness value (149 HBN). The tensile strength also improved, with the composite milled for 4 h showing a 28% increase (292 MPa) compared with the unreinforced alloy. Additionally, the friction coefficient decreased with GNP content and milling duration, with the composite milled for 8 h showing a 26% reduction. Wear resistance was notably enhanced, with the composite milled for 8 h exhibiting the lowest specific wear rate (7.86 × 10−7 mm3/Nm).

The influence of graphene nanoplatelet content on the mechanical properties and microstructure of sustainable concrete

The effects of the content of graphene nanoplatelets (GNPs) on the mechanical properties and microstructure of sustainable concrete were investigated. Aqueous solutions were prepared, using a wet-dispersion technique to disperse GNPs in the mixing water. Concrete batches were prepared using different GNP fractions (0.05, 0.1, 0.25, 0.5, 1 and 2% by weight of cement), and their compressive, flexural and tensile strengths were determined at 28 days. Qualitative microstructural analyses were performed using scanning electron microscopy and energy dispersive X-ray analysis. The results obtained were analysed using analysis of variance (Anova), which demonstrated improvements in all strength properties when using GNP filaments regardless of their weight fraction. The batch containing 0.5% GNPs showed the largest strength improvements, with improvements in compressive, flexural and tensile strength properties of 22.6%, 23.9% and 255.4%, respectively. Microstructural analysis showed a good dispersion of nanofilaments inside the concrete matrix through the dispersion technique used in this study. Finally, Anova revealed statistically significant relationships between the GNP content and the compressive, flexural and tensile strengths of the concrete specimens. The results highlight the importance of the GNP content in influencing the concrete's mechanical properties.

Production and mechanical characterization of Carbon fiber laminated composites modified by Graphene nano platelets (GnP) for high performance application

Polymeric materials play a pivotal role in diverse high-performance engineering domains, including aerospace, marine, automotive, and defense sectors. Their applications span from essential protective gear to intricate components vital for aircraft missiles, showcasing their versatility and significance in modern technology. The Graphene nano platelets (GnP) have the exceptional properties of a high contact area with the reinforcement material and enhanced synergistic effect, which is highly desired to improve the material performance. The present work describes the production of Carbon fiber laminated composites enhanced by Graphene nano Platelets (GnP) using a cost-effective Hand layup method (HLM). Herein, three different concentrations of GnP at 0.25, 1.0, and 1.75 wt% were used to modify the CFRP laminates. This is primarily performed to examine the viscoelastic and mechanical properties of the proposed GnP/CFRP sample. The findings of mechanical testing reveal that GnP nanofiller addition of 1.00 wt% significantly enhances the tensile and flexural properties by 20.7% and 10.05% respectively in comparison to neat sample. Also, the composites show satisfactory improvement in impact strength by 31.60% and enhanced viscoelastic properties at a 0.25 wt% of GnP loading. The XRD and DMA findings support GnP loading for high performance applications.

Remarkable tribo-mechanical, anticorrosion and antibacterial properties of ZnCu/GNPs composite coatings prepared by electro-co-deposition technique

Herein, we report the fabrication of graphene nanoplatelets (GNPs) reinforced zinc-copper (ZnCu) matrix composite coatings on a stainless-steel substrate using electro-co-deposition technique. The influence of varying concentrations of GNPs in the acidic electrolyte bath on the microstructure, chemical composition, phase structure, hardness, wear resistance, corrosion resistance, and antibacterial activity of ZnCu/GNPs composite coating was investigated. The microhardness of the ZnCu/GNPs composite coating with a GNPs concentration of 100 mg/L is compared with pure ZnCu coating, which has a 90 % significant enhancement, while (50 mg/L) has 86 %, and (25 mg/L) has 50 %. Also, ZnCu/GNPs composite coating showed a wear loss of 10 mg for 100 mg/L GNPs sample with an increase in microhardness. The bacterial resistance assays were conducted against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The results reveal a notable improvement in the anti-bacterial activity of the ZnCu/GNPs composite coating. The corrosion rate of the ZnCu/GNPs composite coating in 3.5 wt % NaCl solution steadily decreased when the concentration of GNPs in the electrolyte bath was increased to 100 mg/L. These findings hold great potential for various applications, including healthcare settings where preventing healthcare-associated infections is critical, public infrastructure to prolong the lifespan of structures, and marine coatings to protect against corrosion in harsh marine environments.