Concentration Range Research Articles

Analysis of Choriocapillaris Reperfusion Topography Following Faricimab Treatment for Neovascular Age-Related Macular Degeneration in Therapy-Naïve Patients.

To assess changes in choriocapillaris (CC) vascular density surrounding macular neovascularization (MNV) in treatment-naïve age-related macular degeneration (AMD) after faricimab application using optical coherence tomography angiography (OCTA). Twenty-five eyes of 25 treatment-naïve individuals who underwent intravitreal faricimab injections for neovascular AMD (nAMD) with type 1 MNV were included. Spectral-domain optical coherence tomography (SD-OCT) images and en-face swept-source OCTA images were analyzed, and the percentage of CC flow deficit (FD%), FD average area (FDa) and FD number (FDn) in five progressive 20.0-μm-wide concentric rings (R1, R2, R3, R4 and R5) surrounding the dark halo around the MNV were calculated. Image acquisition was carried out prior to the first faricimab injection (T0) and 1 month after the injection (T1). The topographical sub-analysis revealed noteworthy changes in all rings at T1 compared to T0. There was a notable progressive reduction in FD% at T1 compared to T0 values across all rings, indicating a gradual CC reperfusion following anti-VEGF treatment. Additionally, the average size of FD decreased after the loading phase. Although not reaching statistical significance, there was a progressive reduction in the FDa across all rings. Our study highlights a CC FD reduction following the administration of three consecutive faricimab injections. This effect was detected in all rings surrounding the dark halo. These observations suggest a partial CC reperfusion surrounding the MNV, potentially serving as an indicator for disease regression.

Nonlinear and abnormal relationship between turbidity and suspended solids concentration in mountainous rivers: A case study of the Lai Chi Wo river in Hong Kong, China

Suspended solids concentration (SSC) in a river is closely relevant to river water turbidity. Investigation of their relationship in this study is accompanied by observed turbidity and SSC values, which were obtained from the testing results of water samples and monitored conditions in streamflow. The water samples were collected from two observation stations with a broad range of sediment concentrations in the Lai Chi Wo catchment in Hong Kong, China. We classified the target rainfall events into single-peak event type and dual-peak event type for a distinguished discussion of the relationship between SSC and turbidity in this study. At a finer classification, each event is separated into defined processes for the analysis, where two main processes refer to the periods that SSC rises from a normal state to a peak state first and the followed periods that SSC recesses to ordinary status gradually. It is advised by the analysis results that the estimation of SSC through turbidity values should be based on the same rainfall types for the upstream station. However, the results show that the classification of rainfall types does not need to take downstream areas into consideration. Furthermore, current research implies that the individual established connections between SSC and turbidity value at different stages (particularly referring to the rising period and recessing period) could be applied to estimate SSC at the same station via continuous turbidity values for both this and other ungauged stations with similar topographical features in the future. Meanwhile, this research approach provides new insight exploring various behaviors of sediments at different stages during an integral rainfall event. A comparison of distinguished performances of sediment during corresponding stages in a rainfall event makes contributions to diverse relationship between SSC and turbidity in the mountainous river.

A Quality by Design (QbD) driven gradient high performance liquid chromatography method development for the simultaneous estimation of dasatinib and nilotinib in lipid nanocarriers

Tyrosine kinase inhibitors (TKIs) are effective as a targeted treatment for chronic myeloid leukemia (CML), which can selectively suppress BCR-ABL1 kinase activity. CML therapy with TKIs combination has been supported by in-vitro, in-vivo, and patient-based data where the nilotinib-dasatinib co-administration has exerted superior anticancer efficacy with greater cellular uptake, less resistance to chemotherapy, and no additive adverse events encountered. Therefore, it is essential to develop a suitable analytical method for the simultaneous estimation of these drugs in the developed novel lipid nanocarriers like liposomes. Design of Experiment (DoE) has been implemented as a tool of QbD to systematically investigate the relation between the HPLC method attributes and analytical responses, i.e., chromatographic detection, quantification, and peak properties for dasatinib and nilotinib. An Ishikawa diagram is constructed to delineate possible influencing variables to the analytical performances. Afterward, 4 factors 2 level full factorial design (FFD) was employed to model and identify the main effects and interaction effects between the factors selected after the initial risk assessment. The suggested design space for optimized chromatographic conditions by QbD analysis is linear within the selected range of drug concentrations, accurate and precise, sensitive, and robust according to the ICH guidelines. The optimal method is comprised of a 1 mL/min flow rate of mobile phase (ACN and 20 mM KH2PO4 of pH 7.00) in gradient mode at 25 °C column temperature for 20 μL sample injection volume and detection wavelength fixed at 297 nm. Most importantly, this novel HPLC method is simple and selective enough to evaluate dasatinib and nilotinib content in the lipid nanocarriers.

Dissolved oxygen affinities of hundreds of benthic foraminiferal species

Over the past decades, fossil assemblages of benthic foraminifera have been used to reconstruct the variability of oxygen-depleted areas, including oxygen minimum zones. These areas currently represent almost a tenth of the global oceans' surface area, and further expansion is expected due to global warming; with major impacts on marine ecosystems, biodiversity, and fisheries. To predict their future evolution, accurate estimates and quantification of past oceanic oxygenation are needed, and thus consistent calibration of the O2 estimation transfer functions is required.Here, we combine the BENFEP database that compiles all the benthic foraminiferal census data published for the East Pacific Ocean, with dissolved oxygen data interpolated from the WOA18 and GLODAPV2.2022 databases, to describe the oxygen affinities of the 1526 benthic foraminiferal taxa from the BENFEP database among 1691 samples. The affinities of the most common 202 species of the database are detailed here. For each of these taxa, the range of oxygen concentration, average O2 value where the species is usually found, and O2 value associated with its peak in relative abundance are listed and used to assign each taxon to the oxygen categories anoxic, dysoxic, suboxic, low oxic, and high oxic.Finally, using the relative abundance of each of these five oxygen assemblages and their associated taxa, transfer function indices of dissolved oxygen estimation were refined. The new BFAex extends the range of applicability of the formerly published BFA index, here updated using all the available samples BFAup and extended from 0.04 to 2.58 mL L−1 to 0.02–6.62 mL L−1.

Improved Nitrogen Dioxide Detection utilizing Electronic Interactions of POT/SnO2 Nanocomposite

In this study, we present a unique technique utilizing POT/SnO2 nanocomposites to create an ultrafast and extremely sensitive nitrogen dioxide gas sensor. Various characterization approaches, including XRD, FE-SEM, UV–Vis spectroscopy, Raman spectroscopy, and FTIR, were systematically applied to verify the successful synthesis of the POT/SnO2 nanocomposite. We tested the conductivity and sensing efficiency with an emphasis on the chemosensitivity component. The sensor based on POT/SnO2 has remarkable sensitivity over a broad range of NO2 concentrations from 5 to 650 ppm. Our results indicate that the incorporation of SnO2 into POT significantly enhanced the sensor sensitivity, increasing from 26% for pure POT to 87% for the composite. This improvement produced rapid response and recovery times of 47 s and 44 s, respectively, along with remarkable long-term stability at room temperature. With its remarkable sensitivity and performance characteristics, our sensor emerges as a strong contender for real-time nitrogen dioxide detection, representing a noteworthy advancement in gas sensing technology.

Timing of Volatile Degassing From Hydrous Upper‐Crustal Magma Reservoirs With Implications for Porphyry Copper Deposits

AbstractThe timing and duration of volatile generation from crystallizing magma reservoirs and fluid release across the magmatic‐hydrothermal interface depend on complex coupled interactions controlled by non‐linear, dynamic properties of magmas, rocks and fluids. Understanding these mechanisms is essential to explain the rare formation of economic porphyry copper deposits. For this study, we further developed a coupled numerical model that can simultaneously resolve magma and hydrothermal flow by introducing a description of fluid transport within the magma reservoir and volatile release to the host rock. Our simulations use realistic magma properties derived from published experimental and modeling studies and cover different magma compositions and water contents. We show that magma convection at melt‐dominated states leads to homogenization, which delays fluid release and promotes a rapid evolution toward a mush state. The onset of magmatic volatile release can be near‐explosive with a tube‐flow outburst event lasting <100 years for high initial water contents of >3.5 wt% H2O that could result in the formation of hydrothermal breccias and vein stockworks or trigger eruptions. This event can be followed by sustained fluid release at moderate rates by volatile flushing caused by magma convection. Subsequent fluid release from concentric tube rings by radial cooling of non‐convecting magma mush with a volume of ∼100 km3 at ∼5 km depth is limited to remaining water contents of ∼3.1 wt% H2O and lasts 50–100 kyr. Ore formation from hydrous magmas may thus involve distinct phases of volatile release.

Electroanalysis of Catechol and Hydroquinone by Glassy Carbon Electrode Modified with Multi-Walled Carbon Nanotubes, β-cyclodextrin Decorated with Reduced Graphene Oxide - Gold Nanoparticle Nanocomposite

In this work, the glassy carbon electrode was modified by multi-walled carbon nanotubes, β-cyclodextrin, reduced graphene oxide, and gold nanoparticle nanocomposites GC/MWCNTs/β-CD-rGO@Au). The GC/MWCNTs/β-CD-rGO@Au electrode was utilized for simultaneous monitoring of catechol (CC) and hydroquinone (HQ). The modified electrode has a clear pair of voltammetric peaks for CC and HQ, which makes it an appropriate tool for the simultaneous determination of the two isomers. Under optimized conditions, the oxidation peak currents of CC and HQ at GC/MWCNTs/β-CD-rGO@Au were increased linearly in the 1–173 μM and 2–80 μM concentration range with the limit of detection (LOD) (based on S/N = 3) of 0.17 μM and 0.26 μM. The GC/MWCNTs/β-CD-rGO@Au exhibits adequate stability, repeatability, and recovery in analyzing two dihydroxybenzenes isomers.

Development of an eco-friendly fluorescent probe for mefenamic acid sensing in pharmaceuticals and biofluids.

Mefenamic acid, renowned for its analgesic properties, stands as a reliable choice for alleviating mild to moderate pain. However, its versatility extends beyond pain relief, with ongoing research unveiling its promising therapeutic potential across diverse domains. A straightforward, environmentally friendly, and sensitive spectrofluorometric technique has been developed for the precise quantification of the analgesic medication, mefenamic acid. This method relies on the immediate reduction of fluorescence emitted by a probe upon interaction with varying concentrations of the drug. The fluorescent probe utilized, N-phenyl-1-naphthylamine (NPNA), was synthesized in a single step, and the fluorescence intensities were measured at 480 nm using synchronous fluorescence spectroscopy with a wavelength difference of 200 nm. Temperature variations and lifetime studies indicated that the quenching process was static. The calibration curve exhibited linearity within the concentration range of 0.50-9.00 μg/mL, with a detection limit of 60.00 ng/mL. Various experimental parameters affecting the quenching process were meticulously examined and optimized. The proposed technique was successfully applied to determine mefenamic acid in pharmaceutical formulations, plasma, and urine, yielding excellent recoveries ranging from 98% to 100.5%. The greenness of the developed method was evaluated using three metrics: the Analytical Eco-scale, AGREE, and the Green Analytical Procedure Index.

Electrochemical chiral sensor developed using nanofibrous polyaniline chiral Structures: Detection and differentiation of D- and l-tryptophan

In this work, a simple strategy for electrochemical detection and differentiation of D- and L- forms of tryptophan is demonstrated using nanofibrous structures of chiral polyaniline (CP). Basically, CP with desired chirality is prepared using a chiral acid namely, ± camphor sulfonic acid (±CSA) in presence of either a cationic (or) anionic surfactant (CTAB / SDS) through a simple oxidative polymerization process. Structure, morphology and phase purity of the resultant CP materials are characterized by field emission scanning electron microscopy, Fourier transform infrared spectroscopy, Raman spectroscopy and X-ray diffraction studies. Moreover, the chiral properties of these conducting polymers are evaluated using circular dichroism (CD) spectroscopic studies. From these analyses it is found that CP exhibited twisted nanofibrous morphology and possesses the chirality whereas the non-chiral polyaniline (PANI), prepared in the absence of chiral acid, displayed the formation of a simple fibrous structures without any twists or chirality. Interestingly, such CP materials are found to be electrochemically selective for the detection and differentiation of D- and L- forms of tryptophan (Trp). Among the different chiral materials, CP-CT(−) prepared using CTAB displayed a much better sensing characteristics with higher IL/ID ratio, wider concentration range of detection and lower detection limit of 0.98 µM for l-Trp and 1.2 µM for d-Trp respectively. On the other hand, non-chiral PANI does not display any sensing behavior towards the differentiation of amino acid, Trp. Further, chronoamperometric studies reveal the selectivity of this chiral sensor for the detection of Trp among the other potentially interfering analytes. Although the difference in the measured peak current value is smaller, a significant difference of 70 mV peak potential is observed for the differentiation of L- and d-Trp. Moreover, the proposed CP-based sensing platform exhibits excellent stability and reproducibility with statistically negligible error values suggesting the potential use of the developed material towards electrochemical chiral detection and differentiation of amino acid, Trp.

A phase I thorough QT/QTc study evaluating therapeutic and supratherapeutic doses of avacopan in healthy participants.

This phase I thorough QTc, double-blind, randomized, placebo- and positive-controlled, parallel group, multiple-dose study evaluated avacopan's effect on cardiac repolarization using concentration-QTc (C-QTc) as the primary analysis. Avacopan 30 mg b.i.d. (therapeutic dose) was administered orally on days 1 through 7 followed by avacopan 100 mg b.i.d. (supratherapeutic dose) on days 8 through 14 in 29 healthy participants. Moxifloxacin 400 mg and placebo were administered on days 1 and 15 in a nested crossover design for assay sensitivity in separate cohorts to 28 participants. Time-matched plasma concentrations and up to 10 replicate ECGs were obtained on prespecified days at baseline and postdose on days 1, 7, 14, and 15. The mean change from baseline on QTcF for avacopan (-5.5 to 3.5 ms) was similar to placebo (-6.9 to 1.4 ms) across days 1, 7, and 14. The mean effect on ΔΔQTcF (90% CI) was estimated as 1.5 ms (-0.17 to 3.09) and 0.8 ms (-2.41 to 4.05) for 30 and 100 mg avacopan b.i.d. treatments, respectively. Based on the C-QTc analysis, avacopan's effect on ΔΔQTcF >10 ms can be excluded within the observed plasma concentration range of up to ~1220 and ~335 ng/mL for avacopan and active major metabolite, M1, respectively. The estimated population slopes showed a shallow relationship, which was not statistically significant. There was no clinically meaningful effect of avacopan on heart rate or cardiac conduction (PR and QRS intervals). Avacopan appeared to be generally well tolerated in this study population.

Development of a fluorescent nano-sensing probe for atomoxetine analysis: Additional clinical pharmacokinetic study

Atomoxetine is a psychostimulant drug used for the treatment of attention-deficit/hyperactivity disorder (ADHD) symptoms in people with autism. Herein, eco-friendly fluorescent carbon quantum dots (CQDs) were synthesized using black-eyed pea beans and characterized for the purpose of quantifying atomoxetine in pharmaceutical capsules and human plasma. The selectivity of these CQDs towards atomoxetine was improved by functionalizing their surface with an atomoxetine-tetraphenylborate ion complex. The quantification of atomoxetine is based on measuring the fluorescence quenching of the functionalized CQDs in response to varying concentrations of atomoxetine. The Stern-Volmer plot was employed to investigate the mechanism through which atomoxetine quenches the fluorescence intensity of the CQDs. The outcomes indicated a dynamic quenching mechanism. The applied method was optimized and validated in compliance with ICH requirements, resulting in excellent linearity across the concentration range of 50–800 ng/mL. The developed method was successfully used to quantify atomoxetine in pharmaceutical dosage form and human plasma with acceptable accuracy and precision outcomes. In addition, the method was applied for clinical pharmacokinetic study of atomoxetine in the plasma of children diagnosed with both autism and ADHD. Atomoxetine was rapidly absorbed after a single oral dose of 10 mg, reaching maximum concentration within two hours and having a half-life (t1/2) of 3.11 h. Moreover, the method demonstrates a notable degree of eco-friendliness, as evidenced by two greenness evaluation metrics; Green Analytical Procedure Index (GAPI) and Analytical GREEnness (AGREE).

Green synthesis of carbon dots from mature green tea leaves for label-free fluorescence sensing of chromium(VI)

Hexavalent chromium (Cr(VI)) has been established as a highly carcinogenic and mutagenic entity. Therefore, there has been a persistent demand for affordable, sensitive, and quick sensors to monitor the presence of Cr(VI) in aqueous systems. A straightforward, cost-efficient, and eco-friendly approach has been reported in this work in terms of blue-fluorescent carbon dots (CDs, 5.2 nm) being realized in a single-step hydrothermal process. For this purpose, fully grown green tea leaves as the main carbon source were deployed due to being cheap, and environmentally sustainable and readily accessible sources. These CDs exhibit good water solubility, photo-stability and photo-emission (maximal emission at 438 nm for 360 nm excitation wavelength), anti-interference, and low cytotoxicity. The article demonstrates a straightforward fluorescent test for the precise detection and determination of Cr(VI). This was realized through the construction of a non-luminous complex which led to fluorescence quenching via the inner filter effect (IFE). Accordingly, the system can be employed as a label-free nanosensor. Under optimal condition (pH 4 and 5 min reaction time), the fluorescence quenching efficiency of CDs exhibited a well-defined linear correlation in the 0.01 to 8 mg/L concentration range of Cr(VI). A linear equation represents the system sensor as F0/F = 0.2101x + 1.0016 (R2 = 0.99). The limit of detection (LOD) has been as minimal as 0.004 mg/L (s/k = 3). These findings infer CDs as a potential cost-effective nanosensor for Cr(VI) identification in tap water specimens.

Development of fluorescence probe for spectrofluorimetric determination of viloxazine hydrochloride in pharmaceutical form and rat plasma; additional pharmacokinetic study.

Attention deficit hyperactivity disorder (ADHD) is a neurological condition frequently identified in early childhood and frequently co-occurs with other neuropsychological disorders, particularly autism. Viloxazine hydrochloride, a non-stimulant medication, has recently gained approval for treating attention-deficit hyperactivity disorder. This paper describes the first spectrofluorimetric method for precisely measuring the content of viloxazine in pharmaceutical capsules and rat plasma. This method employed NBD-Cl (4-chloro-7-nitrobenzo-2-oxa-1,3-diazole) as a fluorescent probe, which transformed viloxazine in an alkaline environment into a remarkably sensitive fluorescent adduct. Upon excitation at 476 nm, this adduct becomes detectable at a wavelength of 536 nm. The method was validated using ICH criteria, revealing acceptable linearity across a concentration range of 200-2000 ng/ml and high sensitivity with LOD and LOQ values of 46.774 ng/ml and 141.741 ng/ml, respectively. This method was adeptly applied in a pharmacokinetic study of viloxazine in rat plasma following a single oral dose (10mg/kg), yielding a mean peak plasma concentration (Cmax) of 1721 ng/ml, achieved within 1.5h. Furthermore, the environmental impact of the technique was assessed using two greenness assessment tools, revealing a notable level of eco-friendliness and sustainability.

Phenolic compounds from pumpkin pulp: Extraction optimization and biological properties

Ultrasound-assisted extraction of (poly)phenols from pumpkin pulp was optimized using response surface methodology. Time, solvent-to-sample ratio and percentage of water in ethanol were considered and a full factorial design was applied. The optimized conditions (10 min; 30 mL/g; 50% water in ethanol) were used to isolate (poly)phenols from five pumpkin varieties (Hokkaido, Lunga di Napoli, Mantovana, Moscata di Provenza, Violina rugosa), collected for two successive years. Phenolic acids were the most abundant phenolic class (gallic acid up to 413.50 μg/g), even if differences were observed among varieties and harvesting years. Generally, Violina rugosa harvested in 2021 showed the highest total phenol content (7.59 mg gallic acid equivalents/g) and antioxidant properties (16.93 mg Trolox equivalents/g). All pumpkin variety exhibited antimicrobial activity within a concentration range of 1.95 to 250 μg/mL. In conclusion, the pumpkin pulp can be considered a promising natural source of (poly)phenols for the development of health-promoting products.

Exploring the taste presentation and receptor perception mechanism of salty peptides from Stropharia rugosoannulata based on molecular dynamics and thermodynamics simulation

The taste presentation and receptor perception mechanism of the salty peptide of Stropharia rugosoannulata were predicted and verified using peptide omics and molecular interaction techniques. The combination of aspartic acid (D) and glutamic acid (E), or peptide fragments composed of arginine (R), constitute the characteristic taste structural basis of salty peptides of S. rugosoannulata. The taste intensity of the salty peptide positively correlates with its concentration within a specific concentration range (0.25–1.0 mg/mL). The receptor more easily recognizes the first amino acid residue at the N-terminal of salty peptides and the aspartic acid residue in the peptides. GLU513, ASP707, and VAL508 are the critical amino acid residues for the receptor to recognize salty peptides. TRPV1 is specifically the receptor for recognizing salty peptides. Hydrogen bonds and electrostatic interactions are the main driving forces for the interactions between salty peptides and TRPV1 receptors. KSWDDFFTR has the most potent binding capacity with the receptor and has tremendous potential for application in sodium salt substitution. This study confirmed the taste receptor that specifically recognizes salty peptides, analyzed the receptor-peptide binding interaction, and provided a new idea for understanding the taste receptor perception of salty peptides.

Studying the ability of olive leaves nanoparticles to reduce free radicals resulting from the effect of gamma rays on water

This study aims to explore the potential of olive leaves nanoparticles (OLNPs) in scavenging free radicals, particularly 2,2-diphenyl-1- picryl-hydrazyl-hydrate (DPPH), and their capability to mitigate the effects of ionizing radiation. The in vitro assessment of antioxidant activity revealed promising results for OLNPs, exhibiting effective DPPH scavenging within a concentration range of 0.00002 to 0.0001 g/l. Additionally, the natural nanoparticles demonstrated significant antioxidant capacity, suggesting their potential as radical scavengers against free radical-induced damages. Characterization of OLNPs was conducted using UV-Visible absorption spectroscopy, revealing surface Plasmon resonance absorption peaks around 287 nm. Furthermore, atomic force microscopy was employed to determine the morphology and size of the OLNPs, indicating an average diameter of 65 nm.

Construction of rGO and GSH Electrochemical Sensor by Electrodeposition for Naringenin Sensing

Naringenin (NRG), a flavanone compound present in citrus fruits, has a variety of beneficial physiological active functions such as antioxidant, anti-inflammatory, and hypoglycaemic. In this study, an sensor was constructed by electrodeposition and used for the electrochemical study of NRG. Reduced graphene oxide (rGO) and glutathione (GSH) showed the ability to synergistically amplify NRG signals and possessed good linearity in the concentration range of 10.00–1200.00 μmol l−1. The linear equation is Ip = 0.0776logc + 0.9353 (R2 = 0.9901), and the limit of detection is 3.33 μmol l−1. The sensor performed well in terms of reproducibility, stability, and selectivity, which in turn enabled the detection of NRG in tomatoes. The average recovery of the sensor is 95.68% to 111.92%, with RSD less than 11.89%. The results were also verified by Ultraviolet–visible spectroscopy(UV-vis). Furthermore, density-functional theory was employed to analyse the front track of the NRG, speculating that the NRG underwent a transfer of two electrons and two protons.

Co@IRMOF-9/GCE sensor for rapid electrochemical identification of trace Hg2+, Pb2+ and NO2− in solutions

Simultaneous trace detection of many toxic metal ions is a difficult and valuable problem. In this paper, we have designed and constructed an innovative electrochemical sensor for synchronously detected trace amounts of Hg2+, Pb2+ and NO2− in solution quickly, accurately and at low cost. In this study, IRMOF-9 was modified by solvothermal method to prepare Co@IRMOF-9 as electrode material. Co2+ as the active ingredient, IRMOF-9 with ideal specific surface area and porosity, and the synergistic interaction between the Co2+ and IRMOF-9 enhances the electrochemical sensing performance of Co@IRMOF-9. The structure, composition, electrochemical sensor identification performance and practical application characterization of Co@IRMOF-9 prove that this novelty sensor platform has the feature of reliability and sensitivity. The Co@IRMOF-9/GCE sensor can identify Hg2+, Pb2+ and NO2− only in 200 s in the solution concentration range of 0.04–10 μM, 0.05–100 μM, 0.05–100 μM with the LOD, is 1.33 nM, 1.66 nM, and 1.27 nM, respectively. This paper provides a strategy and method for designing a simple and practical electrochemical sensor platform that can in real time identify multiple harmful trace metal ions in solution.

Lamellar Ti3C2 MXene composite decorated with platinum-doped MoS2 nanosheets as electrochemical sensing functional platform for highly sensitive analysis of organophosphorus pesticides

Precisely detecting organophosphorus pesticides (OPs) is paramount in upholding human safety and environmental preservation, especially in food safety. Herein, an electrochemical acetylcholinesterase (AChE) sensing platform entrapped in chitosan (Chit) on the glassy carbon electrodes (GCEs) decorated with Pt/MoS2/Ti3C2 MXene (Pt/MoS2/TM) was constructed for the detection of chlorpyrifos. It is worth noting that Pt/MoS2/TM possesses good biocompatibility, remarkable electrical conductivity, environmental stability and large specific surface area. Besides, the heterostructure formed by the composite of TM and MoS2 improves the conductivity and maintains the original structure, which is conducive to improving the electrochemical property. The coordination effect between the individual components enables the even distribution of functional components and enhances the electrochemical performance of the biosensor (AChE-Chit/Pt/MoS2/TM). Under optimal efficiency and sensitivity, the AChE-Chit/Pt/MoS2/TM/GCE sensing platform exerts comparable analytical performance and a wide concentration range of chlorpyrifos from 10−12 to 10−6 M as well as a low limit of detection (4.71 × 10−13 M). Furthermore, the biosensor is utilized to detect OPs concerning three kinds of fruits and vegetables with good feasibility and recoveries (94.81% to 104.0%). This work would provide a new scheme to develop high-sensitivity sensors based on the two-dimensional nanosheet/laminar hybrid structure for practical applications in environmental monitoring and agricultural product detection.

Selective Determination of 4,4′-Oxydianiline (4,4′-ODA) in Plastic Packaging Using Molecularly Imprinted Polymer Sensor Integrated with Pyrolyzed Copper/Carbon Composite

This study focuses on the synthesis, fabrication, and characterization of a molecularly imprinted polymer (MIP) sensor tailored for the selective determination of 4,4′-oxydianiline (4,4′-ODA) in plastic products. Notably, by integrating the sensor matrix with pyrolyzed copper/carbon material derived from Cu-BTC MOF, a remarkable enhancement in electrochemical performance is achieved. The Cu-BTC material is grown successfully on the surface of carbon nanotubes (CNTs) and subjected to calcination at 800 °C, yielding a CNT/Cu/C composite. This composite exhibits an increased surface area and enhanced electron transfer capability, resulting in an improved current response. To augment the selective detection capability of the modified electrodes for 4,4′-ODA, molecularly imprinted polymers (MIPs) were incorporated onto the composite surface. The modified electrode (CNT-2/Cu/C/MIP/GCE) was synthesized using acrylamide (AM) and methacrylic acid (MAA) as dual-functional monomers with 4,4′-ODA as a template molecule via precipitation polymerization. The differential pulse voltammetric (DPV) current response to 4,4′-ODA showed a favorable linear relationship within the concentration range of (0.15–10 μM,10–100 μM), with a detection limit of 0.05 μM. Moreover, the CNT-2/Cu/C/MIP/GCE sensor demonstrates exceptional sensitivity, specificity, consistency, and durability. Furthermore, this approach has proven effective in detecting 4,4′-ODA in spiked nylon spatula samples, with recovery rates ranging from 86.3% to 103.5%.