Loading Concentration Research Articles

Exploring Simple Particle-Based Signal Amplification Strategies in a Heterogeneous Sandwich Immunoassay with Optical Detection.

Heterogeneous sandwich immunoassays are widely used for biomarker detection in bioanalysis and medical diagnostics. The high analyte sensitivity of the current "gold standard" enzyme-linked immunosorbent assay (ELISA) originates from the signal-generating enzymatic amplification step, yielding a high number of optically detectable reporter molecules. For future point-of-care testing (POCT) and point-of-need applications, there is an increasing interest in more simple detection strategies that circumvent time-consuming and temperature-dependent enzymatic reactions. A common concept to aim for detection limits comparable to those of enzymatic amplification reactions is the usage of polymer nanoparticles (NP) stained with a large number of chromophores. We explored different simple NP-based signal amplification strategies for heterogeneous sandwich immunoassays that rely on an extraction-triggered release step of different types of optically detectable reporters. Therefore, streptavidin-functionalized polystyrene particles (PSP) are utilized as carriers for (i) the fluorescent dye coumarin 153 (C153) and (ii) hemin (hem) molecules catalyzing the luminol reaction enabling chemiluminescence (CL) detection. Additionally, (iii) NP labeling with hemin-based microperoxidase MP11 was assessed. For each amplification approach, the PSP was first systematically optimized regarding size, loading concentration, and surface chemistry. Then, for an immunoassay for the inflammation marker C-reactive protein (CRP), the analyte sensitivity achievable with optimized PSP systems was compared with the established ELISA concept for photometric and CL detection. Careful optimization led to a limit of detection (LOD) of 0.1 ng/mL for MP11-labeled PSP and CL detection, performing similarly well to a photometric ELISA (0.13 ng/mL), which demonstrates the huge potential of our novel assay concept.

G-C3N4/CuO loaded polyester fabric as effective Fenton-like dip-catalyst for the oxidation of dyes

This work aims to assess the catalytic efficiency for the degradation of organic dyes through advanced oxidation using a novel catalyst PE/g-C3N4-CuO. Polyester (PE) serves as an inert support, while the active catalyst comprises nanoparticles of graphitic carbon nitride g-C3N4-and copper oxide (CuO). The PE/g-C3N4-CuO was successfully prepared by sonicating g-C3N4 onto the PE matrix followed by the deposition of CuO nanoparticles, an efficient and reusable “dip catalyst”. Various physicochemical techniques have been employed to characterize the synthesized g-C3N4, CuO, and PE/g-C3N4-CuO such as FTIR, XRD, SEM, TEM, XPS and TGA. The composite is used for the oxidation of MB, MO, CR and RhB dyes via advanced oxidation process in presence of H2O2 as oxidant. In addition, the impacts of several parameters, such as pH, catalyst surface, CuO loading (%), H2O2 and MB concentration, on the degradation kinetics were thoroughly examined. A removal efficiency (94 %) of MB and TOC (80 %) has been attained for 30 min of the reaction using a surface of 4 cm2 PE/5%g-C3N4-10%CuO. The synthetized composite presented high stability after five reaction cycles with no discernible decrease in catalytic activity. Furthermore, OH were determined as the main reactive oxidative species (ROSs) responsible for highly efficient MB degradation. Finally, catalyst stability and recyclability demonstrated that the PE/g-C3N4-CuO might serve as a substitute Fenton-like catalyst for the oxidation of dyes and environmental cleanup.

Evaluating the environmental and economic performance of biological and advanced biological wastewater treatment plants by life cycle assessment and life cycle costing.

The primary objective of this study is to assess and establish benchmarks for environmental and economic sustainability of biological and advanced biological wastewater treatment plants (WWTPs) with different treatment technologies and characteristics. Furthermore, the study aims to determine the beneficial role of WWTPs to reduction of eutrophication potential. Environmental and economic sustainability of ten municipal WWTPs was assessed using life cycle assessment (LCA) and life cycle costing (LCC). In the first section of the study, LCA was performed to determine the environmental performance of the WWTPs. Furthermore, net environmental benefit (NEB) approach was implemented to reveal the beneficial role of WWTPs to eutrophication potential. In the subsequent section, LCA-based LCC was conducted by integrating the results of LCA. The most significant environmental impact was determined as marine aquatic ecotoxicity, which is highly affected from the generation and transmission of electricity consumed in the WWTPs. Wastewater recovery and co-incineration of sewage sludge in cement kiln ensure significant environmental savings on ozone layer depletion, human toxicity, acidification, photochemical oxidation, and abiotic depletion (fossil fuel) potential. Considering NEB approach, the highest NEB values were found for the WWTPs with the higher organic load and nutrient concentration in the influent. The results of LCC in WWTPs varied between 0.21 and 0.53 €/m3. External (environmental) costs were evaluated higher than internal (operational) costs for all selected WWTPs. While eutrophication was the highest among environmental costs, electricity cost was the highest among operational costs for almost all WWTPs.

Beyond droplet deposition: Virus transport and deposition modeling in respiratory tract influenced by ambient environment and exhalation activities

Quantifying virus deposition in the respiratory tract during exposure to various infected environments is crucial for developing effective indoor environmental interventions against airborne infectious diseases. This study presents a novel approach that combines a physical model for virus-laden droplet evaporation, size-independent viral load concentrations, and computational fluid dynamics simulations inside the respiratory tracts. We quantify the impact of exhalation activities and actual vapor pressure on virus deposition fraction (DFv) and droplet deposition fraction (DFd) in the respiratory tract by tracking virus-laden droplets from exhalation to inhalation to deposition. Our findings reveal that virus deposition fraction significantly differs from the droplet deposition fraction in the respiratory tract, as the minimum mean absolute percentage error (MAPE) is 0.65. Moreover, the exhalation activities and indoor conditions play a vital role in virus deposition. Considering exhalation activity is necessary for assessing the potential risk of infection in the lung lobes. The deposition fraction and copies of the virus are nearly 2-fold and over 6000-fold higher during patient speaking compared to breathing, respectively. Actual vapor pressure is also vital for the interception of the upper respiratory tract. The DFv decreases from 66.86% to 46.96% as actual vapor pressure changes from low to high. Additionally, our study quantifies the difference in virus deposition fraction between size-dependent and size-independent viral load concentrations, showing the necessity of considering size-dependent viral load concentration. Our findings improve the predictability of infection risks and can refer to the development of effective non-pharmaceutical interventions in indoor environments in the post-pandemic.

Serum betaine and dimethylglycine in mid-pregnancy and the risk of gestational diabetes mellitus: a case-control study.

To investigate the associations of choline, betaine, dimethylglycine (DMG), L-carnitine, and Trimethylamine-N-oxide (TMAO) with the risk of Gestational diabetes mellitus (GDM) as well as the markers of glucose homeostasis. We performed a case-control study including 200 diagnosed GDM cases and 200 controls matched by maternal age (±2 years) and gestational age (±2 weeks). Concentrations of serum metabolites were measured by the high-performance liquid chromatography - tandem mass spectrometry (HPLC-MS/MS). Compared to the control group, GDM group had significantly lower serum betaine concentration and betaine/choline ratio, and higher DMG concentration. Furthermore, decreased betaine concentration and betaine/choline ratio, increased DMG concentration showed significant association with the risk of GDM. In addition, serum betaine concentrations were negatively associated with blood glucose levels at 1-h post-glucose load (OGTT-1h), and both betaine and L-carnitine concentrations were positively associated with 1,5-anhydroglucitol levels. Betaine/choline ratio was negatively associated with OGTT-1h and blood glucose levels at 2-h post-glucose load (OGTT-2h) and serum choline concentrations were negatively associated with fasting blood glucose and positively associated with OGTT-2h. Decreased serum betaine concentrations and betaine/choline ratio, and elevated DMG concentrations could be significant risk factors for GDM. Furthermore, betaine may be associated with blood glucose regulation and short-term glycemic fluctuations.

Catalytic cycloaddition of CO2 to epoxidized methyl oleate over a HBimCl-NbCl5/HCMC: Physicochemical, mass transfer and kinetic investigation

The cycloaddition of CO2 to epoxidized molecules is an ecofriendly strategy for synthesizing aliphatic carbonates. In this study, heterogeneous catalytic synthesis of carbonated methyl oleate was performed. Influences of reaction parameters such as reaction temperature (403.15–443.15 K), pressure (1–3 MPa), concentration of functional groups (1.22–2.88 mol·L−1) and catalyst loading (0.025–0.042 g·mL−1) on the kinetics were evaluated. Gas-liquid mass transfer of CO2 in the methylated oleic acid system was investigated, and a mathematical model was developed. The dissolution of CO2 was found to be exothermic, and the dissolution capacity decreases with increasing temperature and decreasing pressure. The solubility of CO2 follows an order of methylated form > epoxidized form > carbonated form. A high conversion rate (68.45 %) of epoxides was achieved in 6 h at 443.15 K and 3 MPa with a catalyst loading of 0.042 g·mL−1. These results show a potential route for synthesizing aliphatic carbonates by combining methyl oleate with CO2.

80 Effect of copper bolus administration on circulating copper concentration, blood metabolites and parasite load

Abstract In Texas and Southeastern United States Cu concentration in the soil is in the lower 50th percentile, this leads low bioavailability of copper for livestock. Therefore, a 70-d completely randomized block design study was conducted to determine the effects of Cu and fecal egg count in grazing beef cows (n = 40). Cows were blocked by parity and body weight (BW) then randomly assigned to 1 of 2 treatments: standard offering of copper via free choice mineral (CON; Ragland Sweet Mag Mineral Mix, 425 ppm Cu) and those receiving a 25 mg Cu rumen bolus in addition to the standard offering (Santa Cruz Animal Health, Dallas, TX). Cattle were managed as a single herd at the with equal access to water, a grain supplement, and a warm season grass pasture. Fecal samples via rectal grab, blood via coccygeal venipuncture, BW, BCS, hair coat (1 being the healthiest) and shedding (1 being the most slick) scores were all collected on d 0, 10, 24, 38, and 66 relative to treatment initiation. Sera were analyzed to determine circulating Cu, macrominerals, urea, creatinine, and various blood proteins. Fecal egg counts were conducted to determine Coccidial, Moniezia, and Trichostrongyle egg content. Data were analyzed using the GLIMMIX procedure of SAS 9.4 (SAS inst. Inc, Cary, NC). No treatment × day interaction (P = 0.988) was observed for circulating Cu; however, Cu decreased (P < 0.001) in all cattle over time, and TRT tended (P = 0.090) to have increased Cu compared with CON. No interactions or main effects occurred (P > 0.509) for BW. No interaction (P = 0.4389) occurred for BCS, hair, or shedding scores. Hair scores (P < 0.001), shedding scores (P < 0.041), and BCS(P < 0.001) decreased in all cattle over time. Body condition for TRT (5.2 ± 0.056) was greater (P =.0024) than CON (4.9 ± 0.057). Hair score by day decreased (P < 0.001) in TRT, while the shedding had a tendency of increasing (P = 0.0411) by TRT. There were no interactions or main effects on Coccidial (P < 0.220) or Trichostrongyle (P < 0.274) egg content. While no interaction (P = 0.673) for Moniezia was observed, TRT tended (P = 0.095) to have fewer Moniezia eggsthan CON. No interactions (P > 0.100) were observed for any of the blood metabolites, and while they differed (P < 0.05) day to day for all cows, no treatment effects occurred (P > 0.10). Although Cu bolus administration at this concentration did tend to change Cu copper in the animal, effects resulting from it were minimal.

Experimental study on fundamental frequency and human‐induced vibration characteristics of light steel foam concrete composite floor

SummaryIn order to study the dynamic characteristics and human‐induced vibration response of light steel foamed concrete composite floor (LCSF), the vibration characteristics of 4.2 m × 5 m LCSF model were tested under the condition of opposite side support, and the natural vibration frequency of LCSF was obtained. The orthogonal anisotropic elastic plate and the simulated beam element were used, respectively, to compute the natural vibration frequency of the LCSF, and the estimated findings were compared with those obtained from measurements. The discrepancy between the calculated results and the measured results of the approximate beam element using the natural vibration frequency calculation technique is around 13%, but the error for the plate element using the calculated results and the tested results is about 23%. To examine the floor's vibration response under the factors of step frequency, walking path, pedestrian density, and load distribution, the LCSF underwent a human‐induced vibration test. The test results show that the fundamental frequency of the LCSF specimen is about 11 Hz, which can meet the requirements of the specification. However, the vibration response of the LCSF specimen under different conditions of pedestrian load is significantly different. With the acceleration of step frequency and the increase and concentration of load, the floor's vibration response becomes more visible. In the route test, it is established that LCSF has the attribute of a unidirectional plate. The natural vibration frequency of similar floor slab can be calculated by the method of simulating the natural vibration frequency of beam element. The findings can serve as a guide for LCSF research and implementation.

Research on the Impact of Modification Method on 13X Zeolite Molecular Sieve Adsorption Performance for SO2

AbstractThe article takes 13X molecular sieve as the object, studies the effects of three modification methods, including calcination temperature, NaOH solution concentration, and CuO and MnO2 loading, on the adsorption performance of SO2 on 13X molecular sieve, and preliminarily explores the adsorption kinetics characteristics of 13X‐xwt % MnO2. The results show that the modification method of loading 13X‐6wt %MnO2 is better, the penetration adsorption time is about 130 minutes, and the maximum penetrable adsorption capacity is 57.8 mg⋅g‐1 .The adsorption kinetics study of 13X‐6wt % MnO2 shows that the R2 of the quasi‐second‐order model is close to 0.99, indicating that the adsorption process follows the quasi‐second‐order kinetic equation. The particle diffusion kinetic model fitting shows that the adsorption process is divided into two stages, the first stage is rapid adsorption, which is mainly controlled by surface adsorption and intraparticle diffusion rate, while the second stage is mainly microporous or chemisorption, with a smaller adsorption amount.

Solvothermal synthesis of novel ternary BiOI–BiOBr–NiO nanophotocatalyst with improved solar light photocatalytic activity

A novel class of heterojunction BiOI–BiOBr–NiO has been synthesized through solvothermal-precipitation route. Novel as-prepared nanophotocatalysts are highly efficient under simulated sunlight illumination for (Acid Orange 7) AO7 degradation. Even though, NiO possess no photocatalytic efficiency, its combination with BiOBr–BiOI provides exceptional high photocatalytic performance due to more effective photo-generated electron–hole separation through the heterojunction semiconductor construction. XRD, FESEM, EDX, BET, FTIR and DRS analysis were applied to identify the physical, chemical and optical properties of the synthesized BiOI–BiOBr–NiO heterojunctions. The results showed remarkable increase of photoactivity of BiOI–BiOBr–NiO (6:3:1) in comparison with corresponding heterostructures. XRD confirms construction of BiOBr–BiOI over NiO nanoparticles. In addition, 3D image of synthesized samples affirms proper roughness and porosity. The effect of parameters including catalyst loading, pH and dye concentration has been examined. According to recycling tests and XRD of used sample, the novel heterojunction system considered to be photo table.

Silver Nanoparticles Embedded ZnO Foam and its Surface Photoinduced Charge Transfer Behaviors

AbstractZinc oxide (ZnO) has been widely acknowledged as a highly effective photocatalyst for the degradation of organic pollutants. In this study, we presented silver nanoparticles (AgNPs) embedded ZnO foam photocatalyst (Ag−ZnO) on glass substrates by the chemical bath in‐situ co‐deposition method. Our findings demonstrat that at low Ag‐loading content, metallic Ag0 NPs are embedded within the ZnO foam, while at high Ag‐loading content, they accumulates increasingly from inside to the surface of the foam. With the increase of AgNPs loading from 0.1 mM to 1.5 mM, the absorption of Ag−ZnO foams in the visible light region gradually enhances. The photocatalytic degradation efficiency of rhodamine B (RhB) is the highest in Ag−ZnO foams when the Ag loading concentration reaches 0.8 mM, suggesting an optimal content of Ag for enhanced performance. This trend is attributed to the photo‐induced charge transfer behavior of Ag−ZnO samples. The AgNPs embedded inside the ZnO foam enhance the separation of photo‐induced charges and prevent their recombination. As a result, Ag−ZnO(0.8 mM) foam with more photo‐induced holes participate in the photocatalytic reaction, leading to a remarkably high photocatalytic activity.

Toward the development of an ecosystem model ensemble to support adaptive management in Lake Ontario

Notwithstanding the continuing advancement of our understanding of the broader ecosystem functioning in Lake Ontario, emerging evidence suggests that there are fundamental knowledge gaps to accurately describe the relationship between exogenous phosphorus (P) loading and in-lake total phosphorus (TP) concentrations. The whole-lake load appears to frequently exceed the Great Lakes Water Quality Agreement (GLWQA) interim target of 7000 metric tonnes·year−1, although the offshore-water P concentrations are consistently below the GLWQA interim substance concentration objective of 10 µg TP·L–1. Contrasting ecological conditions prevail in different locations of Lake Ontario, owing to the significant urban footprint along the shoreline but also the capacity of dreissenid mussels to sequester P in the littoral zone. Specifically, low ambient P levels threaten fisheries productivity in offshore waters, while nuisance benthic algae (predominantly Cladophora) and toxin-producing cyanobacteria blooms affect the water quality in the nearshore zone. The present study offers a technical analysis of the recent and ongoing modelling work that has been conducted in Lake Ontario and can be potentially used to address the multitude of ecosystem management challenges. Our aim is to provide an overview of all the major models developed by identifying their fundamental assumptions, structural attributes, and general consistency against empirical knowledge derived from the system. The existing modelling work has opted for parsimonious representations of the lower food web coupled with granular grid configurations to effectively link hydrodynamic processes and mass transport between nearshore and offshore waters. The establishment of comprehensive ecophysiological modules that will recreate the mechanisms underlying the interplay among bioavailable phosphorus, planktonic dynamics, dreissenid mussels, and Cladophora is a critical undertaking to reproduce the water quality conditions in the nearshore zone of Lake Ontario. Striving to integrate the lower food web with fisheries and ecosystem-service modelling, we also offer a technical analysis of knowledge gaps and monitoring-assessment objectives that should be addressed to ensure that ecosystem processes of management interest are adequately measured and the local modelling enterprise is focused on suitable performance indicators.

Identifying key environmental factors to model Alt a 1 airborne allergen presence and variation

Fungal spores, commonly found in the atmosphere, can trigger important respiratory disorders. The glycoprotein Alt a 1 is the major allergen present in conidia of the genus Alternaria and has a high clinical relevance for people sensitized to fungi. Exposure to this allergen has been traditionally assessed by aerobiological spore counts, although this does not always offer an accurate estimate of airborne allergen load. This study aims to pinpoint the key factors that explain the presence and variation of Alt a 1 concentration in the atmosphere in order to establish exposure risk periods and improve forecasting models. Alternaria spores were sampled using a Hirst-type volumetric sampler over a five-year period. The allergenic fraction from the bioaerosol was collected using a low-volume cyclone sampler and Alt a 1 quantified by Enzyme-Linked ImmunoSorbent Assay. A cluster analysis was executed in order to group days with similar environmental features and then analyze days with the presence of the allergen in each of them. Subsequently, a quadratic discriminant analysis was performed to evaluate if the selected variables can predict days with high Alt a 1 load. The results indicate that higher temperatures and absolute humidity favor the presence of Alt a 1 in the atmosphere, while time of precipitation is related to days without allergen. Moreover, using the selected parameters, the quadratic discriminant analysis to predict days with allergen showed an accuracy rate between 67 % and 85 %. The mismatch between daily airborne concentration of Alternaria spores and allergen load can be explained by the greater contribution of medium-to-long distance transport of the allergen from the major emission sources as compared with spores. Results highlight the importance of conducting aeroallergen quantification studies together with spore counts to improve the forecasting models of allergy risk, especially for fungal spores.

Metal‐free two‐dimensional phosphorene‐based electrocatalyst with covalent P–N heterointerfacial reconstruction for electrolyte‐lean lithium–sulfur batteries

AbstractThe use of lithium–sulfur batteries under high sulfur loading and low electrolyte concentrations is severely restricted by the detrimental shuttling behavior of polysulfides and the sluggish kinetics in redox processes. Two‐dimensional (2D) few layered black phosphorus with fully exposed atoms and high sulfur affinity can be potential lithium–sulfur battery electrocatalysts, which, however, have limitations of restricted catalytic activity and poor electrochemical/chemical stability. To resolve these issues, we developed a multifunctional metal‐free catalyst by covalently bonding few layered black phosphorus nanosheets with nitrogen‐doped carbon‐coated multiwalled carbon nanotubes (denoted c‐FBP‐NC). The experimental characterizations and theoretical calculations show that the formed polarized P–N covalent bonds in c‐FBP‐NC can efficiently regulate electron transfer from NC to FBP and significantly promote the capture and catalysis of lithium polysulfides, thus alleviating the shuttle effect. Meanwhile, the robust 1D‐2D interwoven structure with large surface area and high porosity allows strong physical confinement and fast mass transfer. Impressively, with c‐FBP‐NC as the sulfur host, the battery shows a high areal capacity of 7.69 mAh cm−2 under high sulfur loading of 8.74 mg cm−2 and a low electrolyte/sulfur ratio of 5.7 μL mg−1. Moreover, the assembled pouch cell with sulfur loading of 4 mg cm−2 and an electrolyte/sulfur ratio of 3.5 μL mg−1 shows good rate capability and outstanding cyclability. This work proposes an interfacial and electronic structure engineering strategy for fast and durable sulfur electrochemistry, demonstrating great potential in lithium–sulfur batteries.

RADA-16-based Self-assembled Peptide Nanofiber Scaffolds Loaded with TGF-β1 Enhance the Chondrogenic Differentiation Potential of BMSCs In vitro.

At present, cartilage repair does not offer ideal efficacy. Fortunately, recent studies have claimed that RADA-16 peptide is an attractive therapeutic strategy for repairing cartilage defects. Therefore, this study tried to explore the effect of RADA-16 loaded with transforming growth factor-beta (TGF-β) 1 on cartilage differentiation of bone marrow mesenchymal stem cells (BMSCs). First, the RADA-16 peptide was synthesized by solid phase peptide, and a well-defined hydrogel was formed by supramolecular peptide self-assembly. Then, TGF-β1 (loading concentration of 10 ng/mL) was loaded into RADA-16, with scanning electron microscopy to observe the morphology of the TGF-β1/RADA-16 hydrogel and detect its related properties. Next, BMSCs were isolated from bone marrow samples and identified. TGF-β1/RADA-16 was co-cultured with L929, BMSCs, and C28/I2 cells, respectively, and the survival and proliferation ability of the cells was determined by live/dead cell staining and MTT assay. Chondrogenic differentiation and sGAG production of BMSCs were determined by Alcian blue staining and Blyscan assay, the expression of cartilage-associated genes by qRT-PCR, and the levels of inflammatory factors by ELISA. As for mechanism investigation, the Smad and ERK/MAPK signaling pathways were detected by western blot. RADA-16 hydrogel exhibited a well-distributed and interconnected porous surface structure, with a loading rate of 91.9% for TGF-β1. The TGF-β1/RADA-16 hydrogel had good release and degradation properties, and had no negative effect on the survival and proliferation ability of BMSCs, L929, and C28/I2 cells. Importantly, TGF-β1/RADA-16 hydrogel significantly accelerated chondrogenic differentiation and sGAG generation in BMSCs, and decreased pro-inflammatory factor production. In addition, the hydrogel also significantly activated the Smad and ERK/MAPK pathways of BMSCs. RADA-16 loaded with TGF-β1 has good biological properties and can enhance the chondrogenic differentiation ability of BMSCs.

Phototunable and Photopatternable Polymer Semiconductors.

ConspectusIn recent decades, there has been rapid development in the field of polymer semiconductors, particularly those based on conjugated donor-acceptor (D-A) polymers exhibiting high charge mobilities. Furthermore, the application of polymer semiconductors has been successfully extended to a wide range of functional devices, including sensors, photodetectors, radio frequency identification (RFID) tags, electronic paper, skin electronics, and artificial synapses. Over the past few years, there has been a growing focus on stimuli-responsive polymer semiconductors, which have the potential to impart additional functionalities to conventional field-effect transistors, garnering increased attention within the research community. In this context, phototunable polymer semiconductors have received significant attention due to their ability to utilize light as an external stimulus, enabling remote control of device performance with high spatiotemporal resolution. Meanwhile, integration of field-effect transistors with polymer semiconductors can enable the realization of complex functions. To achieve this, precise and controllable patterning of polymer semiconductors becomes essential. In this Account, we discuss our research findings in the context of phototunable and photopatternable polymer semiconductors. These developments encompass the following key aspects: (i) polymer semiconductors, such as poly(diketopyrrolopyrrole-quaterthiophene) (PDPP4T), exhibit phototunability when blended with the photochromic compound hexaarylbiimidazole (HABI). The photo/thermal-responsive field-effect transistors (FETs) can be fabricated using blending thin films. Remarkably, these photo/thermal-responsive transistors can function as photonically programmable and thermally erasable nonvolatile memory devices. (ii) By incorporating photoswitchable groups like azo and spiropyran into the side chains of conjugated D-A polymers, we can create phototunable polymer semiconductors. The reversible isomerization of azo and spiropyran groups significantly influences the charge transport properties of these polymer semiconductors. Consequently, the performance of the resulting FETs can be reversibly tuned through UV/visible or near-infrared light (NIR) irradiation. Notably, the incorporation of two distinct azo groups into the side chains leads to polymer semiconductors with tristable semiconducting states, offering the ability to logically control device performance using light irradiation at three different wavelengths. (iii) Photopatterning of p-type, n-type, and ambipolar semiconductors featuring alkyl side chains can be achieved using a diazirine-based, four-armed photo-cross-linker (4CNN) with a loading concentration of no more than 3% (w/w). Furthermore, the semiconducting performances of FETs with patterned thin films were found to be satisfactorily uniform. Importantly, the cross-linked thin films are robust and show good resistance to organic solvents, which is useful for fabricating all-solution processable multilayer electronic devices. (iv) The introduction of azide groups into the side chains of conjugated polymers results in a single-component semiconducting photoresist. The presence of azide groups renders the side chains with photo-cross-linking ability, enabling the successful formation of uniform patterns, even as small as 5 μm, under UV light irradiation. Benefiting from the single component feature, field-effect transistors with individual patterned thin films display satisfactorily uniform performances. Moreover, this semiconducting photoresist has proven effective for efficiently photopatterning other polymer semiconductors, demonstrating its versatility.

Thermomechanical performance and multiscale modeling of hexagonal boron nitride modified out-of-autoclave manufactured silica fiber reinforced phenolic composites

In this study, high loadings of boron nitride (BN) nanoplatelets were added to silica fiber-reinforced phenolic composites to study the multifunctional impact of BN loading and manufacturing processing on the subsequent mechanical, thermal, and thermomechanical properties. A series of high-quality laminates were made with various loadings of BN using compression-molded out-of-autoclave processing. Three-point bend and short beam shear testing determined the relationship between BN loading and mechanical performance. The fracture properties were analyzed using optical and scanning electron microscopy. The thermal conductivity performance was increased up to a 93% improvement, indicating the thermal management multifunctionality of the modified composites without changing the crosslinking ability or glass transition temperature significantly. The modified performance of hybrid silica/phenolic/BN composites is demonstrated through micromechanical multiscale modeling, where BN loading and particle stress concentrations impact the modulus and strength of the composite.

CoFe2O4 as a source of Co(II) ions for imidacloprid insecticide oxidation using peroxymonosulfate: Influence of process parameters and surface changes

Nanometric cobalt magnetic ferrite (CoFe2O4) synthesized by distinct methods was used for in situ chemical activation of peroxymonosulfate (PMS) under neutral conditions to oxidize imidacloprid (IMD) insecticide. The effect of CoFe2O4 load (0.125–1.0 g L−1) and PMS concentration (250–1000 μM) was investigated as well as the influence of phosphate buffer and Co(II) ions. PMS activation by Co(II) ions, including those leached from CoFe2O4 (>50 μg L−1), exhibited a strong influence on IMD oxidation and, apparently, without substantial contributions from the solid phase. Within the prepared solid materials (i.e., using sol-gel and co-precipitation methods), high oxidation rates (ca. 0.5 min−1) of IMD were attained in ultrapure water. Phosphate buffer had no significant influence on the IMD oxidation rate and level, however, its use and solution pH have shown to be important parameters, since higher PMS consumption was observed in the presence of buffered solutions at pH 7. IMD byproducts resulting from hydroxylation reactions and rupture of the imidazolidine ring were detected by mass spectrometry. At optimum conditions (0.125 g L−1 of CoFe2O4 and 500 μM of PMS), the CoFe2O4 nanoparticles exhibited an increase in the charge transfer resistance and an enhancement in the surface hydroxylation after PMS activation, which led to radical (HO● and SO4●–) and nonradical (1O2) species. The latter specie led to high levels of IMD oxidation, even in a complex water matrix, such as simulated municipal wastewater at the expense of one-order decrease in the IMD oxidation rate.

Removal of anionic surfactant from aqueous solutions by adsorption onto biochars: characterisation, kinetics, and mechanism.

Biochar, a waste biomass-derived adsorbent, holds promise for decentralised wastewater treatment. However, limited research exists on its efficacy in adsorbing anionic surfactants in wastewater. To address this, the adsorption of sodium dodecyl sulphate (SDS), a common anionic surfactant, was studied using various biochar types: rice husk biochar (RH-550 and RH-700), wheat straw biochar (WS-550 and WS-700) produced at 550°C and 700°C, wood-based biochar (OB), and activated carbon (AC) as a control. The study investigated the impact of pH (3-9), adsorbent loading (1-10 g/L), adsorbent size (<0.5-2.5 mm), contact time (5-180 min), and initial concentration (50-200 mg/L) on SDS removal. Under optimised conditions (100 mg/L SDS, 4 g/L adsorbent, 1-2 mm particle size, pH 8.3, and 180 min contact time), maximum SDS removals were RH-550 (78%), RH-700 (82.4%), WS-550 (89.5%), WS-700 (90.4%), AC (97%), and OB (88.4%). Among the tested adsorbent materials, WS-550 exhibited the highest SDS adsorption capacity at 66.23 mg/g compared to AC (80.65 mg/g), followed by RH-550 (49.75 mg/g), OB (45.87 mg/g), RH-700 (43.67 mg/g), and WS-700 (42.74 mg/g). SDS adsorption followed a pseudo-second-order kinetic model, indicating chemisorption on the adsorbent surface. The Freundlich isotherm model exhibited a better fit for the experimental data on SDS adsorption using all tested adsorbents except for RH-550. This study showed that biochars produced from agricultural and forestry residues are effective adsorbents for SDS in aqueous solutions and can be a promising sustainable and low-cost material for the treatment of greywater containing anionic surfactants (e.g. handwashing, laundry, kitchen, and bathroom greywaters).

COVID-19 cases, vaccination, and SARS-CoV-2 in wastewater: insights from a Brazilian municipality.

Vaccines combatting COVID-19 demonstrate the ability to protect against disease and hospitalization, and reduce the likelihood of death caused by SARS-CoV-2. In addition, monitoring viral loads in sewage emerges as another crucial strategy in the epidemiological context, enabling early and collective detection of outbreaks. The study aimed to monitor the viral concentration of SARS-CoV-2 in untreated sewage in a Brazilian municipality. Also, it attempted to correlate these measurements with the number of clinical cases and deaths resulting from COVID-19 between July 2021 and July 2022. SARS-CoV-2 viral RNA was quantified by RT-qPCR. Pearson's correlation was performed to analyze the variables' relationship using the number of cases, deaths, vaccinated individuals, and viral concentration of SARS-CoV-2. The results revealed a significant negative correlation (p < 0.05) between the number of vaccinated individuals and the viral concentration of SARS-CoV-2, suggesting that after vaccination, the RNA viral load concentration was reduced in the sample population by the circulating concentration of wastewater. Consequently, wastewater monitoring, in addition to functioning as an early warning system for the circulation of SARS-CoV-2 and other pathogens, can offer a novel perspective that enhances decision-making, strengthens vaccination campaigns, and contributes to authorities establishing systematic networks for monitoring SARS-CoV-2.