Feed Composition Research Articles

Quantifying and Mitigating Greenhouse Gas Emissions in Egg-Laying Hen Farming: A Path Towards Carbon Neutrality

This study presents a comprehensive framework for assessing and mitigating greenhouse gas (GHG) emissions in commercial egg-laying hen farming in Uttaradit Province, with the aim of achieving carbon neutrality within the poultry sector. Employing a detailed life cycle assessment (LCA) over a 450-day production period, this research identifies key sources of emissions, with feed consumption identified as the largest contributor, followed by water use and energy demands. To address these emissions, the study explores several innovative strategies: transitioning to solar photovoltaic systems for lighting and water pumping, shifting from diesel to biodiesel for fuel, and optimizing feed compositions. Additionally, advanced manure management practices are proposed to reduce methane and nitrous oxide emissions. Collectively, these interventions could significantly diminish the emissions associated with hen farming operations, thereby advancing environmental sustainability. This work not only provides actionable insights for poultry farms seeking to lower their emissions but also offers a scalable and adaptable model with broader implications for sustainable practices across the agricultural sector. The findings underscore the importance of renewable energy integration, feed optimization, and efficient waste management in mitigating the environmental impact of agriculture, thereby informing both policy and practice in the pursuit of carbon-neutral food production.

Symbiotic bacteria play crucial roles in a herbivorous mite host suitability.

The tomato russet mite (TRM), Aculops lycopersici, is a strictly herbivorous and economically significant pest that infests Solanaceae plants, but its host suitability varies, showing high performance on tomatoes. Although symbiotic bacteria have been suggested to play crucial roles in the host adaptation of herbivores, their effects on TRM remain unclear. In this study, using next generation high-throughput sequencing of the bacterial 16S rRNA data, we identified the bacterial diversity and community composition of TRM feeding on tomato, eggplant, and chili. Our results show no significant difference in the bacterial community composition of TRM across three host plants. However, the relative density of Escherichia coli (TRM_Escherichia) showed 9.36-fold higher on tomato than on eggplant and chili. These results align with the observed TRM performance among three host plants. When TRM_Escherichia was reduced using antibiotics, the treated TRM decreased the population density on tomato. However, when we transferred TRM from eggplant to tomato, the population density of TRM increased, coinciding with an increase of the TRM_Escherichia density. These results indicate that TRM_Escherichia may affect the host suitability of TRM. Our fluorescence in situ hybridization (FISH) results further showed that TRM_Escherichia is primarily distributed in the salivary glands. Metagenomic data results suggest that TRM_Escherichia functions in food digestion and energy metabolism. We provided the first comprehensive analysis of TRM bacterial communities. Our findings demonstrate that the symbiotic bacterium TRM_Escherichia may play crucial roles in the suitability of TRM feeding on different Solanaceae hosts. © 2024 Society of Chemical Industry.

Forced Dynamic Operation of Propylene Selective Oxidation to Acrolein on Bismuth-Molybdate Structured Catalysts

Forced dynamic operation (FDO) of selective oxidation of propylene to acrolein is evaluated on a structured alumina foam coated with a mixed metal oxide catalyst (bismuth molybdate-based). Reactor experiments examine feed composition modulation as a strategy to increase the yield of acrolein. At lower temperatures, separating the oxidant (O2) and reductant (C3H6) enhances propylene conversion and acrolein selectivity. Variation in the reaction-regeneration switching amplitude and frequency gives a 40% higher cycle-averaged acrolein yield compared to steady-state operation (SSO) for the same overall feed composition. The results suggest that FDO maintains a higher concentration of selective oxygen species during the propylene feed, while pre-oxidation of the catalyst maximizes the amount of selective oxygen species, leading to increased acrolein yield at the beginning of the reaction cycle. Experiments at lower temperature for both commercial promoted and in-house, unpromoted catalysts reveal both catalysts are most active and selective at their highest oxidation states.

Enabling simultaneous CO2 and water vapor removal by MOF-801/Pebax mixed matrix membranes: Molecular simulation and experimental study

Dehydration and CO2 removal are two important gas separation processes. An efficient membrane enabling simultaneous reduction of water vapor and CO2 levels from humid gas streams, such as natural gas and power plant flue gas, may advance these processes. In this study, a water-harvesting metal-organic framework, MOF-801, was synthesized with an average particle size of 120 nm, which was then dispersed in a Pebax matrix to fabricate mixed matrix membranes (MMMs). The potential of the MOF-801 as a filler in MMMs was evaluated for water and CO2 separation from CO2/N2 and CO2/CH4 mixed gas streams. Compared with the neat Pebax membrane, 70% enhancement in the water permeability was achieved for an MMM of 20 wt.% MOF loading at 10 bar with a humid feed composition of CO2/CH4. A considerable CO2/N2 separation factor (108) and CO2 permeability (270 Barrer) were also obtained, exceeding the Robeson upper bound at both dry and humid states. A molecular simulation study was performed to reveal the adsorption sites in the MOF lattice and favorable interactions with gases. Interestingly, competition between gas components close to the Zr atom was observed, which is the favorable site for both CO2 and water. Competitive adsorption was found to be the dominating transport mechanism for the selective transport of CO2 and H2O in MOF-801, revealing the role of MOF-801 in MMMs for CO2 and water vapor separation under both humid and dry conditions.

Regenerable nickel catalysts strengthened against H2S poisoning in dry reforming of methane

In this study, alumina-supported bimetallic Ni-Cu and trimetallic Ni-Cu-Ce catalysts were synthesized to improve catalysts resistant to coke formation and sulfur poisoning for dry reforming of methane (DRM). The effects of parameters such as feed composition, synthesis method, and H2S concentration using the catalyst with the best activity were also investigated. To determine the physical and chemical properties of the synthesized catalysts, XRD, N2 adsorption–desorption, TGA-DTA, ICP-OES, SEM-EDX, XPS, and DRIFTS analyses were performed. XRD analysis showed that the fresh Ni-Cu catalysts have elemental nickel and γ-alumina phases in their structures. In addition to these structures, the CeO2 crystal structure was determined for the Ni-Cu-Ce catalyst. Type IV isotherm with H1 hysteresis indicating uniform mesoporous structure was obtained with all the catalysts. The activities of the synthesized catalysts in DRM were performed in the presence of different concentrations of H2S (2 ppm, 50 ppm, and 500 ppm) in a fixed bed reactor at 750 °C using a gas chromatography-equipped system. The alumina-supported 8Ni-3Cu-8Ce catalyst prepared by the impregnation method exhibited a higher and more stable activity comparing the bimetallic Ni-Cu catalyst in the presence of H2S. Adding copper and cerium to the nickel catalyst has a curative effect on resistance to coke formation and sulfur poisoning. Excess CO2 in the feed stream increased the H2S poisoning resistance of the catalyst. To analyze the reactor exit stream in catalytic activity using different feed stream compositions such as H2S+He, H2S+CO2+He, and H2S+CO2+CH4+He, FTIR with a gas cell was used. The formation of carbonyl sulfide (COS) and H2O, which occurs due to the possible reaction between CO2 and H2S, was observed. Regeneration studies showed that the catalyst could undergo regeneration with a low oxygen concentration (0.3 % O2 in He). 8Ni-3Cu-8Ce@SGA, which gave 71 % CH4 conversion in the first minute of the reaction test in the presence of 50 ppm H2S, was regenerated after completely losing its activity at the end of 5 h. 66 % CH4 conversion was achieved when tested again in the absence of H2S (CH4/CO2/Ar:1/1/1). The 8Ni-3Cu-8Ce@SGA catalyst was deemed worthy of investigation for industrial applications.

Sustainability of Aqua Feeds in Africa: A Narrative Review

In recent decades, the aquaculture industry has seen exponential growth worldwide, surpassing other food production sectors. This review aims to explore the dynamics of aqua feed production, particularly the shift from conventional to local feed production in Africa, driven by cost-effectiveness and the availability of raw materials. This review examines various scientific publications on aqua feed, focusing on both conventional and novel feed formulations and their impact on both small-scale and large-scale aquaculture. Commonly used aqua feed ingredients among African farmers include cassava, maize gluten, groundnut oilcake, sunflower oilcake, soybean meal, kale, peas, garlic, shrimp wastes, and waste blood. Novel ingredients such as insect-based diets, micro-algae, and fish discard formulations are also explored. Aqua feed composition impacts aqua waste, water quality, algae, oxygen demand, fish mortality, and eutrophication, and findings from literature reiterate the need to reorient feed formulation methods and ingredients to achieve a circular economy in Africa. This will entail promoting increased fish production at minimal costs and creating employment while supporting climate adaptation and mitigation efforts. Ultimately, the aqua feed sector has the potential to grow sustainably through the adoption of feed alternatives that prioritize sustainable production and encourage beneficiation studies.

Nitrous oxide abatement and valorization in an ammonia-fueled SOFC stack – Nitric oxide and electricity production

Nitrous oxide (N2O) is a harmful gas that strongly impacts climate change. Several strategies for denitrification have been addressed, where the use of solid oxide fuel cells (SOFCs) has been demonstrated to be attractive for N2O reduction and simultaneous electricity production. The reduction of N2O to N2 is studied for the first time at the cathode of an SOFC, where ammonia is supplied to the anode as fuel. A diluted ammonia stream is particularly interesting since it is normally available in HNO3 plants – the most important concentrated source of N2O emission – and is carbon-free. The combined reduction of N2O with the oxidation of NH3 allows the production of nitric oxide (NO) at the anode, a valuable precursor for HNO3 production.This work uses a commercial SOFC stack comprehending six cells, equipped with membrane electrode assemblies of LSM-CGO ‖ yttria-stabilized zirconia (YSZ) ‖ YSZ-NiO. Electrochemical Impedance Spectroscopy (EIS) was successfully employed to characterize the stack performance. Data were analyzed by combining a Distribution Function of Relaxation Times (DFRT) and Equivalent Circuit Models (ECMs), for different operating conditions, namely in terms of temperature and fuel feed composition. Three major processes were identified at the anode: one related to the adsorption/desorption of reactants on the surface of the electrocatalyst, a diffusion process of charge carriers/intermediate species to the triple phase boundary (TPB), and a charge-transfer process at the TPB. The electrochemical production of nitric oxide (NO) was investigated, and a 20 % selectivity towards NO production and an energy stack efficiency of 88 % was obtained. Overall, the current work provides a critical first step toward using SOFC to perform efficient N2O electroreduction using diluted ammonia as fuel.

Evaluation of the Chemical Composition and Feeding Value of Sweet Orange Pulp and Pineapple Peel Meals as Fibre Sources in Pigs’ Rations

The piggery industry in Nigeria is on the verge of collapsing due to the high cost of conventional feed resources including wheat offal and palm kernel cake that usually form bulk in the diets of pigs. This study was, therefore, designed to compare the chemical composition of orange pulp meal, pineapple peel meal, and wheat offal and evaluate their feeding value in pig rations. The orange pulp and pineapple peels were dried on a concrete floor and analyzed for chemical composition. Three experimental diets were formulated with orange pulp and pineapple peel meals replacing wheat offal as a fibre source. Thirty crossbred (Chester white x Landrace) growing pigs with an average initial weight of 8.20 -- 8.75kg were distributed into three groups, with ten animals per group, and assigned to the three experimental diets. The average daily feed intake and weight gain were monitored throughout the 56-day duration of the experiment. Seven days to the end of the experiment, three pigs randomly selected for the digestibility trial were individually housed in metabolism crates and allowed 5 days of adaptation to the crates and feed before faecal collection commenced. Animals were fed the experimental diets at approximately 4% of their body weight, and the faeces of the animals were collected for 5 days. The determination of the nutrient composition of feed and faecal samples was performed. Data collected were subjected to analysis of variance using a completely randomized design. The result indicated that samples were significantly (P<0.05) different in crude protein composition, with the wheat offal having the highest value corresponding to 9.21 ± 0.12%. Orange pulp had the highest content of ash (6.72 ± 0.12%). The gross energy values were 15.23MJ/kg, 15.31MJ/kg and 16.15MJ/kg for pineapple peel, orange pulp and wheat offal, respectively. The highest manganese concentration was observed in wheat offal (5.19± 0.11mg/l), while orange pulp and wheat offal were higher in sodium and phosphorus concentrations. The pigs fed an orange pulp meal diet recorded the highest average daily weight gain (0.31 kg) and a superior feed conversion ratio (4.19) relative to others. Digestibility values were similar across the three treatment groups. It was, therefore, concluded that orange pulp and pineapple peal meal could serve as alternative fibre sources in growing pigs' rations. Key words: Wheat offal, pineapple peel, orange pulp, growing pigs, digestibility

Generalization of the Carothers equation for linear step growth polymers

In the synthesis of linear step-growth polymers molecular weight control is accomplished through the addition of a controlled amount of monomer carrying the functional group B in excess (B-B or H-B types). The Carothers equation is used to calculate average chain lengths. This paper extends the analysis of chain lengths to include the effect of monofunctional monomers carrying the limiting group A (H-A), allowing the systematic analysis of complex systems containing both bifunctional and monofunctional species of any type (A-A, B-B, H-B and H-A). This refinement is particularly relevant for the synthesis of oligomers from systems with complex feed composition.

Effect of antioxidant and adsorbent on the digestibility and digestibility of nutrients in broiler diets while reducing the risk of aflatoxicosis

Purpose: determination of the adsorbent toxin and antioxidant vitamin C on the digestibility and assimilation of nutrients in the composition of compound feed for broiler chickens with a tolerant level of aflatoxin B1.Materials and methods. The objects of the study were broiler chickens of the KOBB-500 cross. When setting up the experiment, the duration of 42 days, 4 groups of 100 heads each were formed from day-old chickens according to the principle of analog groups. The experimental birds were fed complete compound feeds (CF) based on corn, sorghum and fodder beans. The samples of compound feeds have a high chemical composition and the presence of mycotoxins. Upper limits of permissible concentrations (ULC) for aflatoxin B1 were established in all three types of feed grain. Therefore, they were mixed with safe mycotoxin additives using dispensers in the feed shop of the poultry enterprise. In this way, tolerable levels (no more than 0,25 mg/kg of feed) of the content of this mycotoxin in the composition of the PK fed to the experimental birds were achieved. Against the background of the conducted scientific and production experiment with the use of chromium oxide in the composition of compound feed (as an inert indicator) on chickens (aged 35-42 days) of comparable groups (5 heads from each group), we conducted an exchange (physiological) experiment. Based on the results of chemical analysis of the fed compound feed and excrements in the droppings of the experimental birds, the level of digestibility and assimilation of nutrients in the diet was calculated.Results. During the experiment, the leadership of the combined introduction of the adsorbent toxfin in the amount of 1500 g/t and ingredient C in the amount of 500 g/t of feed into complete feeds for broiler chickens with a tolerant level of aflatoxin B1 was established. As a result, compared to the birds of the control group, the chickens of the 3rd experimental group had significantly (р<0,05) higher coefficients of digestibility of dry matter by 3,66%, organic matter by 3,90 %, crude protein by 3,63 %, fiber by 3.06% and NFE by 3,19 %, respectively. In terms of the degree of nitrogen assimilation (60,45 %), the result (51.45 %) and phosphorus (49,67 %) from the generally accepted amount with feed, the best indicators were also obtained in broilers of the 3rd experimental group, which reliably (р<0,05) outperformed their control indicators for these indicators by 3,74 %, 2,91 % and 2,45 %, respectively.

Pressure-Swing Heterogeneous Azeotropic Distillation for Energy-Efficient Recovery of Ethyl Acetate and Methanol from Wastewater with Expanded Feed Composition Range

This article tends to address the limitations of heterogeneous azeotropic distillation (HAD) for separating Serafimov's class 2.0-2b mixtures, such as ethyl acetate/methanol/water. The feasibility of proposed HAD is constrained by a narrow feed composition range, as thoroughly analyzed through thermodynamic insights in this work. To address these limitations, we propose pressure-swing heterogeneous azeotropic distillation (PSHAD), which allows for a broader application range in feed composition and facilitates heat integration for enhanced economic performance. Thermodynamic insights explore the economic viability and feasibility of PSHAD as feed composition and operating pressure vary. The applicable feed concentration range for PSHAD is determined by liquid-liquid region area and maximum allowable pressure. A parallel genetic algorithm optimizes the processes to minimize total annual cost (TAC). Both PSHAD and the heat-integrated configuration demonstrate superior performance compared to the best process in published literature (i.e., intensified extractive distillation), achieving TAC reductions of 26.46% and 46.22%, respectively.

Process swing adsorption with selective purge gas recirculation (PSA-SPUR): Adsorption process technology optimised for separation of heavy component from a gas mixture and its design for CO2 capture through Equilibrium Theory analysis

PSA-SPUR (Pressure Swing Adsorption with Selective Purge Gas Recirculation) has been developed aimed at separating the most strongly adsorbing component from a gas mixture at high product purity and recovery. The innovative strategy for designing a Pressure Swing Adsorption system features recycling its purge gas stream exiting the column and mixing it back into the feed. This operation enriches the mixed feed with an elevated fraction of the heavy component during the adsorption step, thus enhancing the PSA’s performance greatly. Reusing the purge gas helps significantly increase the product recovery compared to conventional methods where purge gas is simply discarded or taken as a low-quality product. For theoretical analysis of a PSA-SPUR system, a bespoke Equilibrium Theory model was developed and solved successfully, providing valuable insights into the performance of the PSA-SPUR system designed for capturing CO2 from a flue gas. The study revealed that there exists an optimum extent of purging that maximises the heavy component mole fraction in the mixed feed, leading to the best possible feed throughput of the adsorption system. Furthermore, the effects of the desorption pressure and feed composition on the PSA-SPUR system’s performance were investigated. The results indicate that the CO2 capture PSA-SPUR system using commercial zeolite 13X has excellent potential to achieve very high product purity and recovery, being allowed to operate at moderate vacuum pressures without having to compress the flue gas feed, even when the gas feed contains less than 10 mol% CO2.

Effects of cassava pellets and enzymes addition on growth performance, meat quality, serum biochemical indices and cecum microbiota of broilers

The composition of feed significantly influences the growth performance and gut microbiota of broiler chicks, impacting their overall health and productivity. This study aimed to investigate the effects of cassava pellets and enzymes supplementation on the growth performance, meat quality, serum biochemical indices, and cecal microbial community of broiler chicks. A total of 144 healthy 1-day-old AA broilers were randomly assigned to six dietary groups: basal diet (K1), basal diet + 5 % cassava pellets (K2), basal diet + 10 % cassava pellets (K3), basal diet + 20 % cassava pellets (K4), basal diet + 20 % cassava pellets + 0.3 % tannase (K5), and basal diet + 20 % cassava pellets + 0.3 % tannase + 2500 U/kg α-amylase (K6). At 21 days, growth performance, meat quality, serum biochemical indices, and cecal microbial composition were analyzed. Compared to K1, the end weight was significantly higher in the K3 and K5 groups (P < 0.05); average daily weight gain was significantly higher in the K3 and K6 groups (P < 0.05); and the feed-to-weight ratio was lower in the K3 group (P < 0.05). Cecal microbiota analysis revealed that the Bacteroidetes, Firmicutes, and Proteobacteria were the dominant phyla. Alpha diversity showed a significant increase in the Chao index in the K3 group and in the Shannon and Simpson indices in the K6 group compared to the K1 group (P < 0.05). Beta diversity indicated similar microbial compositions across groups. LEfSe analysis showed increased numbers of specific bacteria in treated groups. Serum analysis revealed significantly higher ALT levels in the K4 group and higher IBIL levels in the K5 group (P < 0.05), with Bacteroides plebeius and Megamonas positively correlated with ALT (P < 0.05). The addition of 10 % cassava pellets to the diet improved the growth performance and meat quality of broilers from 1 to 21 days of age and enhanced the microbial composition, providing valuable insights for optimizing broiler diets and improving economic returns.

Impact of Germinated off Season Sorghum Dietary on Apparent Digestibility and Small Intestinal Histology of Broilers in Maroua Far North Cameroon

In order to find a solution to maize in the composition of poultry feed, a study was conducted to evaluate the effect of the substitution of maize by germinated off-season sorghum as an alternative energy source on nutrients digestibility and histological of small intestinal of broilers. To achieve this, 180 of the 1-day-old chicks of the "Cobb 500" strain with a live weight of 34g ± 3.26, were randomly divided into 9 batches corresponding to 3 treatments with 3 replicates of 20 subjects. The batches were subjected to one of 3 diets: 100% maize (R0), 50% maize and 50% germinated off-season sorghum (R1) and 100% germinated off-season sorghum (R2). To achieve these objectives at 18 and then at 35 days of age, a total of 36 broilers were used, i.e. 18 in the start-up phase at a rate of 6 subjects per treatment and 18 in the growth/finishing phase at a rate of 6 subjects per treatment and the droppings and feed from digestibility trials; measured apparent digestibility (Ad) for energy, protein, fiber, mineral matter and organic matter; histological studies of the small intestine were performed. Energy, organic matter, mineral matter, proteins and fibres were not significantly influenced by the experimental diets used at the 0.05% threshold for digestibility and the histological sections did not show any structural and morphological alterations. We can therefore conclude that maize can be substituted at 50% and 100% by germinated off-season sorghum without negatively impacting digestibility in broilers at the start, as well as in growth/finishing.

Beyond viability: Advancing CHO cell culture process strategies to modulate host cell protein levels

Chinese Hamster Ovary (CHO) cells are widely utilized in bioprocessing industry for monoclonal antibody (mAb) production. In many instances, challenges persist in achieving sufficient clearance of Host Cell Proteins (HCPs) in the final drug substance. While purification strategies usually offer substantial HCP clearance, certain "problematic" HCPs, particularly lipases, continue to pose significant challenges. This study investigates the accumulation of various "problematic" HCPs in CHO cell culture using transcriptomics, revealing correations between cell culture parameters and HCP level. Contrary to conventional assumptions, viability alone does not reliably predict HCP levels, with factors such as clone selection, host cell line choice, media and feed compositions significantly influencing HCP accumulation. Leveraging transcriptomics-based approaches, we demonstrate the potential of upstream process control strategies to mitigate HCP presence and improve biologic product quality. Our findings underscore the importance of considering diverse cell culture parameters in bioprocess optimization to ensure product stability and quality. While promising, further research is needed to elucidate the mechanisms underlying HCP release and propagation through downstream processing stages, emphasizing the necessity of a comprehensive integrated approach to HCP control in biologics production.

Energy and cost-efficient ionic liquids extractive distillation for producing electronic and polymer-grade propylene with emphasis on feedstock variability

The separation of propylene/propane is the main source of electronic or polymer-grade propylene. However, the current industrial method faces significant challenges due to high theoretical stages and energy consumption. In this work, an extractive distillation process using ionic liquids (ILs) 1-butyl-3-methylimidazolium trifluoroacetate ([BMIM][TFA]) is proposed to overcome these difficulties. Based on quantum chemical calculations, the mechanism of separation of propylene/propane is analyzed, and the mechanism behind the performance differences of various anions is explored. Optimal designs for extractive distillation processes are investigated for varying propylene/propane feed compositions, targeting electronic and polymer-grade propylene. A comparison of traditional distillation, heat pump distillation, and ILs extractive distillation evaluates both energy consumption and economic factors. The results suggest that both the cation and anion contribute to the separation of propylene/propane, with the cation having a greater effect than the anion. The separation is enhanced by the π-π stacking, C-H···π, and π···H···O interactions between [BMIM][TFA] and propylene, which strengthen the affinity for propylene over propane. Compared to traditional distillation, ILs extractive distillation reduces energy costs by 64.1% to 82.1% for polymer-grade propylene and by 69.5% to 84.0% for electronic-grade propylene, with theoretical stages dropping from 210–240 to 46–78 and 250–280 to 64–98, respectively. It also cuts total annual cost by 2.0% to 37.4% for polymer-grade and 7.4% to 39.2% for electronic-grade propylene compared to heat pump distillation. The extractive distillation using [BMIM][TFA] performs best, indicating substantial potential for separating propylene/propane.

Digestion and importance of starch in ruminants

Ruminants have a unique digestive physiology that heavily relies on microbial fermentation specifically in the rumen. This review explores the complex mechanisms of starch digestion in ruminants and highlights its crucial role in shaping their nutritional landscape. The rumen, a complex microbial ecosystem, is the primary site for starch digestion. Enzymatic hydrolysis and microbial fermentation of starch in this compartment produce important byproducts, such as volatile fatty acids (VFAs) and microbial proteins. These byproducts are crucial sources of energy and protein, which affect the overall metabolic dynamics of ruminants. It is essential to have a comprehensive understanding of the factors that influence starch digestion rates to optimize ruminant nutrition. This review examines the various factors involved in starch digestion, including feed composition, microbial populations, and enzymatic activity, and how they contribute to the digestive process. Additionally, identifying and characterizing starch fractions in concentrated feed sources is crucial for formulating well-balanced rations. In conclusion, this review synthesizes current knowledge on starch digestion in ruminants, offering insights into the complexities of the process. The collected information not only contributes to our academic understanding but also has practical implications for optimizing feeding strategies, enhancing nutrient utilization, and promoting the overall well-being of ruminants.

Human health risk from co-occurring mycotoxins in dairy: A feed-to-fork approach

The presence of multiple mycotoxins in bovine dairy products can lead to potentially harmful health effects. This study examined the risk to human health from multiple mycotoxins in bovine dairy products using a feed-to-fork approach. It conducted a component-based risk assessment, using the toxicity of the most potent mycotoxin as a reference for others. The model also accounted for the influence of varying feed composition on mycotoxin contamination, considering monthly feeding pattern changes in Ireland. The probabilistic risk assessment uses Monte Carlo simulation to capture uncertainty and variability present in the model. The risk characterisation was undertaken using the Margin Of Exposure (MOE) method, where if the MOE was below 10,000, then the population's health was considered at risk. This study investigated the risk to human health from single mycotoxins and a combination of mycotoxins. The results showed that all mycotoxins were of low risk. However, the risk increased when aflatoxin was included in the co-occurring groups. Since 5% of the MOE was less than 10,000, the Irish population (male and female) was at relatively low risk of consuming aflatoxin or other co-occurring mycotoxin-contaminated milk. In comparison, the age group 8–12 years were at a relatively higher risk, with 10% of the MOE less than 10,000. The carry-over rates, the concentration of mycotoxin in feed components and the feeding composition were the most sensitive parameters. An increase in aflatoxin production in feed components can occur under climate scenarios and thus needs to be monitored, preventing any risks from aflatoxin or a combination of co-occurring mycotoxins. This study underscores the need for continuous monitoring and preventive measures, especially in feed components that are sensitive to aflatoxin-producing fungi that may contaminate bovine feed.

Optimization, experimental and theoretical investigation of modified guar-gum and poly(acrylic acid) based smart hydrogel for controlled release applications in the agricultural field

A series of smart polymer hydrogels with good uptake and controlled release characteristics were synthesized free-radically by growing poly(acrylic acid) on allylated guar gum using ammonium persulfate as an initiator and trimethylolpropane triacrylate as the crosslinker. The synthesized hydrogels were evaluated using FT-IR and NMR for their structure, thermo-gravimetric analysis (TG) to measure thermal stability, and scanning electron microscopy (SEM) to analyze surface morphology and swellability by gravimetric method under different pH and temperature conditions. The soil moisture content and gel fractions were measured using gravimetric methods. Additionally, a theoretical investigation was also performed to assess the urea-holding capacity of the synthesized hydrogel matrix using density functional theory (DFT) calculations. The uptake study revealed that the hydrogel with optimized monomer feed composition absorbed 851 g/g of water, 78 % and 67 % of urea from 0.5 % and 1 % urea solutions respectively under ambient conditions. The release study showed that 56 and 47 % of absorbed urea were released over 15 days from the urea-loaded hydrogels (0.5 % and 1 % urea solutions respectively). The uptake mechanism obeyed the non-Fickian and first-order kinetics models. The experimental evaluation and DFT calculations conveyed that the synthesized hydrogel could act as a candidature matrix for the controlled release of water and fertilizer in the agricultural field.

Meat productivity and meat quality of broiler chickens when input plant-based additive in compound feed

At present, the increase in poultry meat production is associated with the development of resource- saving technologies that ensure maximum productivity. However, the search for new methods to reduce the rearing period, increase live weight and reduce feed costs per 1 kg of gain continues. It should be noted that at the current stage of development, poultry farming has a high productivity potential, which is currently not fully utilized in some cases. The main reason is the inclusion of ingredients containing anti-nutritional substances in the compound feed. In compound feed for broiler chickens, the need to use biologically active additives has been proven. The inclusion of such additives in the composition of compound feed helps to increase the productive action, improve digestibility and effi ciency of using nutrients in diets. The purpose of the research was to study the meat productivity and meat quality of broiler chickens when input additive of plant-based additive in compound feed. On the base of research data, the eff ectiveness of including the plant-based feed additive Biostrong 510 in the compound feed for rearing of broiler chickens of the cross Cobb 500 in the amount of 0.010 %, 0.015 and 0.020 % of the compound feed weight was established. It made possible to increase the average daily live weight gain by 4.3–8.5 %, increase the gutted carcass weight by 4.3–4.6 %, reduce feed costs per 1 kg of broiler chicken gain by 0.07–0.13 kg, and increase the profi tability level by 0.78–1.44 abs.%. The safety of the tested additive was proven by a number of indicators. The obtained results of animal science, physiological and biochemical studies made it possible to identify the optimal dose of the plant feed additive Biostrong 510 for broiler chickens of the cross Cobb 500 in feeding technology 0.015 % of the mass of the compound feed.