Composite Nanoparticles Research Articles

Machine learning-assisted identification of potential cancer inhibitors: Multifunctional biomineralized CaCO3-polyethyleneimine nanoparticle carriers and their application in lung cancer therapy

Cancer, as a prevalent phenomenon among malignant tumors, has a late-stage diagnosis rate approaching half, significantly limiting treatment efficacy and imposing substantial physiological and psychological burdens on patients. Therefore, developing innovative therapeutic platforms that simultaneously optimize diagnostic accuracy, enhance therapeutic efficacy, and minimize side effects is a critical scientific challenge in the field of precision cancer medicine. In this study, we employed a simple and efficient one-pot synthesis method combined with polyethyleneimine (PEI)-mediated biomineralization technology to successfully prepare calcium carbonate-polyethyleneimine (CaCO3-PEI) composite nanoparticles. These nanoparticles exhibit high pH sensitivity and can rapidly degrade under the mildly acidic conditions that mimic the tumor microenvironment, providing potential for targeted tumor therapy. Subsequently, we encapsulated compound 1, which has potential for lung cancer treatment, within the CaCO3-PEI nanoparticles, successfully constructing the CaCO3-PEI@1 composite system. Structural analysis of this composite system was conducted through characterization techniques. In vitro cell experiments demonstrated that the CaCO3-PEI@1 composite system exhibited significant anticancer effects by effectively inhibiting cancer cell proliferation through the regulation of apoptosis-related protein Bax expression. This provides new insights and experimental evidence for the development of cancer treatment strategies. Based on the experiment and molecular docking identified activity against lung cancer, the compound 1 was used as the initiator for the machine learning model, and up to 10,000 episodes were generated, after thorough examination, it was found about two-thirds of the generated episodes were entirely different from each other, which demonstrated that the machine learning model was a powerful tool for designing of potential inhibitors against lung cancer.

High‐Pressure Cell for In Situ Grazing Incidence XAS Characterization of Model Catalysts on Planar Supports

AbstractThe growing interest in physically deposited model catalysts for uncovering complex structure‐activity relationships is spurred by the possibility of depositing nanoparticles of precise atomic structure and composition using cluster‐beam sources. However, the limitations accompanying these synthesis techniques, such as low deposition rates and flat sample geometry, present a challenge for in situ structural characterization using bulk‐sensitive methods, such as X‐ray absorption spectroscopy (XAS), especially at elevated pressures (1–100 bar). To overcome this challenge, we constructed an in situ XAS cell operating in a grazing incidence (GI) geometry. The GIXAS cell was used to investigate the structure of cluster‐beam‐generated Pd and Au0.3Ag0.7 nanoparticles under CO2‐to‐methanol hydrogenation conditions (230 °C, 20 bar, CO2:H2=1 : 3). These nanoparticles, with metal loading of 0.96–10 μg cm−2, demonstrated stability and resistance to sintering upon activation in H2 at 120 °C and catalytic conditions, revealed by in situ XAS. The promising results from our work will help bridge the gap in the investigation of model catalytic materials produced by gas‐phase cluster deposition at industrially relevant pressures and temperatures, which is vital for a mechanistic understanding of catalytic processes.

Synthesis of magnetic zirconium oxide-iron oxide nanoparticles composite using chemical precipitation process for Pb (II) adsorption

The exploration and utilization of natural raw zircon minerals in Indonesia, particularly in Central Kalimantan, remain largely untapped in their potential as high-tech and commercially valuable substances with eco-friendly properties, particularly in water and industrial wastewater treatment. The primary objective of this research is to enhance the development and synthesis of natural raw zircon minerals by converting them into zirconium oxide and integrating them with magnetic nanoparticles. The magnetic nanoparticle composite material for zirconium oxide (MNP@ZrO2) was synthesized using the chemical co-precipitation method. Zirconium and its oxides have gained significant application in water and wastewater treatment in recent years. Through chemical co-precipitation processes (MNP@ZrO2), the natural raw zircon minerals were transformed into zirconium oxides and combined with magnetic nanoparticles due to their exceptional potential as effective adsorbents for anions and cations in water and industrial treatment processes. In the utilization of Scanning Electron Microscopy (SEM), magnetic nanoparticles with a diameter of less than 50 nm emerged on the surface of the zirconium crystals within the magnetic nanoparticle composites. X-ray diffraction (X-RD) analysis indicated that the treatment of zirconium minerals resulted in 11.19% decrease in the Crystallinity Index and a significant reduction of 98% in silica content. By maintaining a pH level of approximately 7 ± 0.2 over 360 min with a stirring rate of 150 rpm, and at ambient temperature, the optimal conditions for Pb (II) adsorption were achieved with the adsorption capacity of 68.98 mg/g using MNP@ZrO2 as adsorbent. The successful synthesis of magnetic zirconium oxide-iron oxide nanoparticles at various pH levels using the chemical co-precipitation process has facilitated a comprehensive assessment of their performance in Pb (II) adsorption.

Reversibility in Structural Dynamics on Pt−Ni Bimetallic Nanocrystals under Redox Conditions

AbstractThe reversibility of structural change in a bimetallic catalyst during the chemical reaction is an essential factor to determine the catalytic stability. Herein, we investigate the surface modulation of three Pt−Ni bimetallic alloy nanoparticle compositions (Pt3Ni1, Pt1Ni1, and Pt1Ni3) under alternating redox cycles. We validate trends in the structural change of the three compositions of Pt−Ni nanoparticles via spectroscopic/microscopic investigations at bulk and atomic levels. Pt‐rich Pt−Ni nanoparticles exhibited higher reversibility in structural change during the repeated redox cycles. On the contrary, Ni‐rich Pt−Ni nanoparticles showed irreversible structural changes, leading to the segregation and separation of Ni species from the alloy, which could deactivate the catalysts. This work demonstrates the reversibility of structural dynamics in alloy catalysts depending on their composition, providing fundamental insights for developing ideal bimetallic catalysts.

Hybrid Silica Cage-Type Nanostructures Made from Triply Hydrophilic Block Copolymers Single Micelles.

Controlling the structure and functionality of porous silica nanoparticles has been a continuous source of innovation with important potential for advanced biomedical applications. Their synthesis, however, usually involves passive surfactants or amphiphilic copolymers that do not add value to the material after synthesis. In contrast, polyion complex (PIC) micelles based on hydrophilic block copolymers allow for the direct synthesis of intrinsically functional hybrid materials. While most previous studies have focused on bulk materials made from double-hydrophilic block copolymers (DHBC), in this work we have synthesized a triple-hydrophilic block copolymer (THBC) and demonstrated both its PIC micellization and its potential for hybrid mesoporous silica nanomaterials. Introducing this THBC has allowed to direct the transition from bulk three-dimensional (3D) materials to zero-dimensional (0D) nanomaterials with cage-type structures. The stabilization and isolation of these nanostructures formed around discrete individual micelles has been made possible by the careful design of the three different blocks that each play a key role. These nanostructures could also be synthesized from hybrid PIC micelles based on THBC-multivalent metal ions complexes, offering a direct route to metal/silica composite nanoparticles. This class of THBC polymers therefore creates significant opportunities for the synthesis of nanostructures with complex and functional architectures.

Gradient distribution of cations in rhabdophane La0.27Y0.73PO4·nH2O nanoparticles

The structure of gradient rhabdophane nanoparticles of variable composition (La,Y)PO4·nH2O obtained by precipitation is considered. According to the data of HAADF TEM and EDX mapping using the Abel inversion procedure, it was shown that there is an inhomogeneous distribution of yttrium and lanthanum atoms in the particles from the central part to the periphery. At the same time, the nominal composition of both individual nanoparticles and the entire sample meets the value specified during synthesis within the error of the method – La0.27Y0.73PO4·nH2O. According to SAXS data, it was determined that in the particles of (La,Y)PO4·nH2O, there is a redistribution of scattering densities, which is caused by an increase in the fraction of YPO4 in the peripheral region of the particles. The observed effect of the distribution of cations over the particle made it possible to determine the size of the gradient layer, which reaches 50 % of the total particle size.

Exploiting the synergistic influence of AgNPs-TiO2NPs: enhancing phytostabilization of pb and mitigating its toxicity in Vigna unguiculata

In this study, a composite of silver and titanium dioxide nanoparticles (AgNPs-TiO2NPs) was examined for its synergistic effects on phytostabilization of lead (Pb) and mitigation of toxicity in cowpea (Vigna unguiculata (L) Walp). Seeds of V. unguiculata were wetted with water, 0.05 and 0.1 mgL−1 Pb and 25 mgmL−1 each of AgNPs, TiO2NPs, and AgNPs-TiO2NPs. Root lengths of V. unguiculata were reduced by 25% and 44% at 0.05 and 0.1 mgL−1 Pb, respectively, while shoot lengths were reduced by 2% and 7%. In V. unguiculata, AgNPs and TiO2NPs significantly improved physiological indicators and mitigated Pb effects, with TiO2NPs modulating physiological parameters more effectively than AgNPs. The composite (AgNPs-TiO2NPs) synergistically regulated V. unguiculata physiology better than individual nanoparticles. Compared to individual AgNPs and TiO2NPs, the composite (AgNPs-TiO2NPs) synergistically increased antioxidant activity by 12% and 9%, and carotenoid contents by 88%. Additionally, AgNPs-TiO2NPs effectively reduced malondialdehyde levels by 29%, thereby mitigating the effects of Pb on V. unguiculata better than individual nanoparticles. AgNPs-TiO2NPs enhanced Pb immobilization by 57%, reducing its translocation from soil to shoots compared to V. unguiculata wetted with water. The bioconcentration and translocation factors of Pb indicate that phytostabilization was most effective when the composite was used.

Ratiometric electrochemical and impedimetric dual-mode aptasensor based on thionine-functionalized Ti3C2Tx MXene/Pt and Au nanoparticle composites for reliable detection of aflatoxin B1

Rapid and reliable detection of aflatoxin B1 (AFB1) is critical in public health, food safety and environmental control. Herein, a ratiometric electrochemical (EC) and electrochemical impedance spectroscopy (EIS) dual-mode aptasensing platform based on thionine-functionalized Ti3C2Tx MXene/Pt and Au nanoparticle composites (MXene@Thi/PtAuNPs) was constructed for accurate and reliable detection of AFB1. The MXene@Thi/PtAuNPs composites were prepared by a facile and mild approach. The electroactive molecule Thi embedded in MXene could not only inhibit the aggregation of MXene nanosheets, but also act as an internal reference probe to form a ratiometric sensing strategy. The decoration of Pt and Au nanoparticles can further effectively enhance the conductivity and catalytic activity of the composites. The MXene@Thi/PtAuNPs composites were then served as a support to sequentially assemble hairpin DNA (hDNA) and ferrocene-labelled AFB1 aptamer (Fc-Apt) to construct the dual-mode sensor. The developed dual-mode sensor with both ratiometric EC detection (based on IThi/IFc) and EIS detection (based on Ret) can mutually verify the detection results obtained by two modes, offering more accurate and reliable results, which enabled sensitive and reliable AFB1 detection in the concentration range of 10.0 pg mL−1-30.0 ng mL−1 (ratiometric EC mode) and 3.0 pg mL−1-30.0 ng mL−1 (EIS mode), respectively. The sensing platform also demonstrated favorable selectivity, reproducibility and stability, and satisfactory applicability in corn sample, showing great potential in the sensing of mycotoxins in agricultural products.

Agro-Based nanoparticles composite: A novel approach for enhanced ballistic applications

The field of material science has witnessed a paradigm shift with the emergence of agro-based nanoparticles composites demonstrating remarkable potential for advanced applications. Agricultural by-products, such as cellulose, lignin, and chitin, are selected as the base materials due to their abundance, renewability, low adverse environmental impact and acceptable mechanical properties. The developed composites exhibits superior specific mechanical properties compared to traditional materials. This review explores the synthesis, characterization, and application of agro-based nanoparticles in composites development for ballistic purposes. The eco-friendly nature and synthesis of agro-based composite aligns with the current sustainability goals, offering a green alternative to conventional materials being used in ballistic applications. The utilization of agricultural by-products not only mitigates environmental concerns but also promotes the circular economy by repurposing waste materials into high-value products. This review presents a novel approach in the field of ballistic materials by harnessing the potential of agro-based nanoparticles composites. The superior specific mechanical properties make this composite material a promising candidate for ballistic applications, thereby, opening avenues for sustainable advancements in defense and security technologies. Keywords: Agro-based, Nanoparticles, Composites, Green Technology, Ballistic Application.

Ultrasensitive and Adjustable Nanothermometers Based on Er3+-Sensitized Core@Shell Nanoparticles for Use in the First Biological Window.

In recent years, intensive research has focused on lanthanide-doped nanoparticles (NPs) used as noncontact temperature sensors, particularly in nanomedicine. These NPs must be capable of excitation and emission within biological windows, where biological materials usually show better transparency for radiation. In this article, we propose that NPs sensitized with Er3+ ions can be applied as temperature sensors in biological materials. We synthesized the NPs through a reaction in high-boiling solvents and confirmed their crystal structure and the formation of core@shell NPs by using X-ray diffraction, high-resolution transmission electron microscopy, and element distribution mapping within the NPs. NaErF4@NaYF4, NaYF4:12.5% Er3+, 2.5% Tm3+@NaYF4, NaYF4:7.5% Er3+@NaYF4, and NaYF4:12.5% Er3+, 2.5% Ho3+@NaYF4 exhibited intense upconversion (UC) emission under 1532 nm laser excitation detectable also in the whole human blood. We propose that this UC results from energy transfer between Er3+ ions and from Er3+ to Tm3+ or Ho3+ codopants. To determine the mechanism of UC, we measured the dependence of the emission band intensities on the laser power densities. Importantly, we also analyzed the temperature-dependent emission of the NPs within the 295-360 K range. Based on the collected emission spectra, we calculated the luminescence intensity ratios (LIRs) of the emission bands to assess their potential for optical temperature sensing. The temperature-sensing properties varied with the concentration of Er3+ ions and the presence of additional Tm3+ or Ho3+ codopants. Depending on the NP composition and the emission bands used for luminescence ratio calculations, the maximum relative temperature sensitivity ranged from 4.55%·K-1 to 1.12%·K-1, with temperature resolution between 0.05 and 2.53 K at room temperature. Finally, as proof of using NPs as temperature sensors in biomedicine, we successfully measured the temperature-dependent emission of NaYF4:7.5% Er3+@NaYF4 NPs dispersed in whole blood under 1532 nm excitation. We demonstrated that the ratio of Er3+ ion emission bands changes with temperature, indicating that these NPs have potential applications in temperature sensing within biological environments. We also confirmed the properties of NPs as temperature sensors by measuring the temperature reading uncertainty and the repeatability of the LIR readings during heating-cooling cycles, thereby confirming the excellent properties of the studied systems as temperature sensors.

Synergistic effects of graphene nanoparticles on the thermomechanical properties of PEEK-HNTs nanocomposites

In our previous study, we selected a 3% concentration (PH3) from various prepared PEEK-HNTs nanocomposites. Poly (ether ether ketone) (PEEK) is characterized by non-perfluorinated aromatic compounds with 1,4-disubstituted phenyl groups linked by carbonyl (––CO––) and ether (––O––) groups, offering exceptional thermal stability, mechanical strength, tribological properties, and chemical resistance at high temperatures. Halloysite nanotubes (HNTs) are known for their non-toxic, environmentally friendly, cost-effective properties, with tunable release and rapid adsorption rates. In this study, we prepared graphene nanoparticle (GNP) composites at three different concentrations while maintaining constant PH3 levels. The composites underwent comprehensive characterization using FTIR, TGA, DSC, SEM, and DMA techniques. Thermomechanical properties were evaluated using a universal testing machine. Results demonstrate significant enhancements in hardness, impact strength, elongation at break, tensile modulus, and flexural modulus, with the highest performance observed in the GNP-loaded 0.3% (PHG3) concentration. The synergistic effects of GNP fillers in PH3 are attributed to enhanced interfacial adhesion and favorable interactions with the polymer matrix.

Eco-friendly nanocomposite particles CuO/Fe2O3 and CuFeO2 as corrosion inhibitors of reinforced steel for concrete

Abstract In the last period of scientific research, the application of nanoscale materials had a huge interest in enhancing sustainability and improving the performance of concrete. This paper discusses lots of experimental truths about nanoparticles (CuO, Fe2O3) and nanocomposite particles (CuFeO2 and CuO/Fe2O3), which are manufactured by green chemistry and their effect on concrete. Because of their advanced properties due to containing the two heavy transition metals iron and copper, these particles can It is possible to bring about a wide development in the field of building and construction, and they may finalize more than one function at the same time. The dispersion of nanoparticles (Nps) in concrete mixtures is a key strategy to achieve the tailoring process, which is used to design new materials with specific properties to perform desired functions or applications. In this paper, resistance against chemical corrosion is achieved. These nanocomposites (Ncps)can improve the microstructure, function, and strength. The SEM, physical, mechanical characterization, workability and electrochemical measurements of the concrete based on those Nps. The results discovered that those Nps are corrosion resistant, contributing to decreased failure corrosion problems, which may lead to continuing to work at the same level throughout the years of service. This communication aims to provide a deep comprehension of the role of (Ncps) admixtures in concrete composites. They provide possible methods to enhance their overall characteristics and establish the basis for a more sustainable and long-lasting future in the building field.

High-performance triboelectric nanogenerator with aminated barium titanate composite nanoparticles for early Parkinson’s disease diagnosis

High dielectric constant nanoparticles into polymer matrices have attracted much attention because this process can improve the nanofriction generator performance. However, the dispersion of the developed materials remains a challenge. In this paper, we present a novel high-performance nanofriction generator (FBT-TENG) based on composite nanoparticles of Amino-functionalized barium titanate and functionalized graphite oxide (FGO/ABTO) with Polyimide (PI) as substrate, which can be used as a sensor for intelligent monitoring systems. Specifically, we introduced amino groups on the surface of barium titanate to improve its dispersion in the PI solution, and the dual effect composite with functionalized graphite oxide improved the TENG performance of the PI film. Due to the FGO/ABTO synergy, the FBT-TENG can generate high output voltages, currents and power densities of 75 V, 13 µA and 4.6 W/m2, respectively, which is a 9 times increase in power density compared to the original PI film. FBT-TENG is capable of powering capacitors. In addition, the FBT-TENG can be used as a sensor to build an early Parkinson’s disease detection system, which provides a more convenient option for the early diagnosis of Parkinson’s patients and has the potential for a wide range of medical applications.

Immunomodulatory effects of Fructus corni acidic polysaccharide and its selenium nanoparticles composites in hepatocellular carcinoma

Natural polysaccharides have promising application prospects in cancer immunotherapy due to their excellent biocompatibility and immunomodulatory effects. In this study, an acidic polysaccharide (FCP-3) from Fructus corni with good immunomodulatory effects was extracted. Stable polysaccharide‑selenium nanoparticles composites (FCP-SeNPs) were synthesized to enhance the immunoregulatory effects of FCP-3. The molecular weight and monosaccharide composition of FCP-3, as well as the morphological characteristics and chemical composition of FCP-SeNPs were analyzed. The immunological effects and anti-tumor activity of FCP-3 and FCP-SeNPs were explored. These results suggested that FCP-3 and FCP-SeNPs increased the production of NO, TNF-α and IL-12p70 in macrophages, and the ratio of CD4+/CD8+ T cells in peripheral blood, as well as indirectly promoted hepatoma cells apoptosis in vitro. After treatment with FCP-3 and FCP-SeNPs, tumor size was significantly controlled. The proliferation antigen staining (KI67) and apoptosis assay (TUNEL) also demonstrated an obvious inhibitory effect on tumor proliferation. Moreover, FCP-SeNPs showed stronger efficacy compared to FCP-3 alone. These findings demonstrated the promising potential of FCP-SeNPs as an immunoregulatory agent for hepatic carcinoma.

Non-exchange bias hysteresis loop shifts in dense composites of soft-hard magnetic nanoparticles: New possibilities for simple reference layers in magnetic devices

Exchange bias has been extensively studied in both exchange-coupled thin films and nanoparticle composite systems. However, the role of non-exchange mechanisms in the overall hysteresis loop bias is far from being understood. Here, dense soft-hard binary nanoparticle composites are used not only as a novel tool to unravel the effect of dipolar interactions on the hysteresis loop shift but also as a new strategy to enhance the bias of any magnet exhibiting an asymmetric magnetization reversal. Mixtures of equally sized, 6.8 nm, soft maghemite (γ-Fe2O3) nanoparticles (no bias—symmetric reversal) and hard cobalt doped γ-Fe2O3 nanoparticles (large exchange bias—asymmetric reversal) reveal that, for certain fractions of soft particles, the loop shift of the composite can be significantly larger than the exchange-bias field of the hard particles in the mixture. Simple calculations indicate how this emerging phenomenon can be further enhanced by optimizing the parameters of the hard particles (coercivity and loop asymmetry). In addition, the existence of a dipolar-induced loop shift (“dipolar bias”) is demonstrated both experimentally and theoretically, where, for example, a bias is induced in the initially unbiased γ-Fe2O3 nanoparticles due to the dipolar interaction with the exchange-biased hard nanoparticles. These results open a new paradigm in the large field of hysteresis bias and pave the way for novel approaches to tune loop shifts in magnetic hybrid systems beyond interface exchange coupling.

A hybrid gripper with electro-adhesive film for variable friction

In recent years, gripper technology has gained attention in robotics for reliably handling objects with delicate and complex shapes. Electro-adhesive grippers, in particular, have received significant attention due to their role in enhancing object grasping and manipulation capabilities. While much of the existing research has focused on improving electro-adhesion through advancements in EA film and nanoparticle modifications, this study takes a different approach by integrating electro-adhesion as an auxiliary function within a mechanical gripper. This integration allows for a novel hybrid gripper that uses electro-adhesive force to reduce the required normal force during gripping, thereby improving the handling of challenging objects. We thoroughly analyzed the gripper’s geometric design, along with its kinematic and mechanical properties. Our study also examined crucial performance parameters, such as nanoparticle content, composition, and electrode design, to optimize the generation and maintenance of electro-adhesion. To confirm performance, the developed gripper was affixed to a UR3 robotic manipulator from Universal Robotics, and gripping experiments on assorted objects, as well as anti-slip control experiments, were carried out. The results demonstrated that the integration of electro-adhesive force with a mechanical gripper significantly enhances gripping capability, particularly in terms of slip control and friction variation. This indicates that the Electro-Adhesive (EA) film hybrid gripper presents a novel and effective approach to advancing gripping and manipulation technologies.

The use of gold and magnetite-gold composite nanoparticles for the enhanced detection of Salmonella LT2 cells under photoacoustic flow cytometry

Photoacoustic flow cytometry (PAFC) is an emerging technology that has generated significant interest in several research fields, particularly in bacteremia. The application of functionalised nanoparticles like gold and iron oxide-gold complex (Fe3O4-Au) has been realised to enhance the photoacoustic (PA) detection of bacteria cells under PAFC systems. Inclusively, the bacteria cell concentrations are statistically quantified through the number of time-signal detection counts. This study uses a similar technique by using gold (Au) and magnetite-gold complex (Fe3O4-Au) nanoparticles in the PAFC system to improve the detection of Salmonella LT2 (SLT2) cells under 532 nm laser irradiation, resulting in over a 200 % increase. However, this study’s contribution comes from the post-processing and analysis of PA time signals after exposing various concentrations of SLT2 cells. Upon fast Fourier transform (FFT) analysis of time signals, a distinct peak frequency at 2.75 MHz was significantly attributed to SLT2 as its likely acoustic frequency fingerprint, even at its lowest concentrations (10 CFU/ml). Furthermore, an electromagnetic wave simulation (optical scattering and heat transfer in fluids) was employed to distinguish the PA and Photothermal contributions of the nanoparticles in the system. The resulting data consolidates the continuous wave transform (CWT) of the time signal, where 22.5 – 30 µs was strongly affiliated with PA, and 32–40 µs was that of the photo-thermal-acoustic effect—indicating that both signals can be used to detect and potentially confirm the eradication of SLT2 cells. Overall, magnetised Fe3O4-Au nanoparticles yielded more efficiency through its reproducible PA time signals with 0.84 standard deviations, and its 2.75 MHz frequency peak area matches most accurately with the SLT2 cell concentration by 97.3 %.

One-step preparation of La2O3-modified MOF-SnO2 gas sensor for ethanol detection

In this work, bimetallic MOF-derived SnO2-La2O3 composite nanoparticles were prepared via one-step hydrothermal method. The Sn0La, Sn0.05La, Sn0.1La, Sn0.3La, and Sn0.5La sensor samples were made by adding different contents of La elements. A series of characterization tests have been carried out. It was found that the Sn0.3La sensor sample exhibited the most pronounced response (S = Ra/Rg = 260) to 100 ppm ethanol at the optimum working temperature of 275 °C, which was 37.1 times higher than that (S = Ra/Rg = 7) of the pure MOF-SnO2 sensor sample. Meanwhile, the Sn0.3La sensor possessed the fast response capability (29/42 s), excellent selectivity, superior stability and reproducibility. The outstanding performance of the material was attributed to the catalytic properties of the rare earth La element and the construction of n-n heterojunctions. Therefore, the method of enhancing sensor performance with rare earth element loading has great research potential.

<i>In vitro</i> synthesis and microscopic structural change of fetuin-A/calcium phosphate composite nanoparticles during phase transition process

<i>In vitro</i> synthesis and microscopic structural change of fetuin-A/calcium phosphate composite nanoparticles during phase transition process

Natural synergy: Oleanolic acid-curcumin co-assembled nanoparticles combat osteoarthritis

Curcumin (Cur) is a natural polyphenol that is one of the most valuable natural products. However, its use as a functional food is limited by low water solubility, chemical instability and poor bioavailability. In this study, a supramolecular co-assembly strategy was used to construct an oleanolic acid-curcumin (OLA-Cur) co-assembly composite nano-slow-release treatment system. As a co-assembled compound, OLA is a widely present pentacyclic triterpenoid compound with multiple biological activities in the plant kingdom, which is expected to jointly alleviate the damaging effects of papain-induced mouse osteoarthritis model. The OLA-Cur NPs shows the solid core-shell structure, which can effectively improve the water solubility of Cur and OLA, and has good stability and sustained release characteristics. The analysis results show that the two compounds are mainly assembled through hydrogen bonding interactions, hydrophobic interactions, and π - π stacking interactions. The OLA-Cur NPs can inhibit the release of pro-inflammatory cytokines TNF-α, IL-6, and IL-1β induced by LPS in RAW264.7 mouse macrophages, promote the secretion of anti-inflammatory cytokine IL-10, and improve the oxidative stress index of hydrogen peroxide induced human rheumatoid arthritis synovial fibroblasts. In addition, it has a certain improvement effect on cartilage and subchondral bone damage in mouse osteoarthritis models. These findings suggest that constructing co-assembled composite nanoparticles based on pure natural compounds may break through the limitations of a variety of important nutritional ingredients in functional foods.