Sodium Complexes Research Articles

Влияние некоторых видов обработки на продолжительность сушки и органолептические показатели нарезанных баклажанов

Abstract. Eggplant is a common vegetable crop from the Solanaceae family, whose share of global vegetable harvests in 2022 was about 5 %. However, eggplant is thermophylic and its fruits cannot withstand low temperatures due to physiological disorders and quality reduction. This fact and thin covering tissues make the shelf life of eggplant fruits short. For this reason, improving existing methods for preserving the quality and extending the period of use of eggplants is relevant. One of the most popular methods of preserving fresh plant raw materials is drying, but it requires the selection of a method (including pre-treatment of raw materials) and process parameters to preserve the quality of dried products. In the course of the study, the influence of certain types of physical and chemical pre-treatment (microwave frequencies, citric acid, sodium chloride, their combinations) on the drying time and organoleptic characteristics of sliced eggplant fruits of the Chernomor variety was studied. It was found that various types of treatments used influenced the duration of drying of eggplants: treatments with microwave frequencies and citric acid led to a reduction in process time by 31-43 minutes compared to the control; treatments with sodium chloride solution and complex treatments, on the contrary, increased the duration by more than 3 hours. Organoleptic evaluation of dried eggplants showed that the best characteristics were provided by treatment with 1% and 5% citric acid solutions. While pre-treatment with microwave frequencies and NaCl with various parameters gave an unpleasant taste and was accompanied by darkening of the product. The data obtained can be used to improve existing methods of drying eggplants. Key words: eggplants, drying, organoleptic characteristics, super high frequency, citric acid, sodium chloride

Synthesis and Characterization of Heterodinuclear Indium(III)/Sodium(I) Complexes Containing Benzotriazole-Derived Phenolate Ligands: Effective Catalysts for Ring-Opening Copolymerization of Carbon Dioxide with Epoxides.

This study reported for the first time the facile synthesis of a series of novel structurally well-characterized heterodinuclear indium(III)/sodium(I) dihalide complexes containing benzotriazole-based bis(amino-phenolate) derivatives. All heterobimetallic In(III)/Na(I) complexes were found to be active single-component catalysts for the copolymerization of carbon dioxide (CO2) with cyclohexene oxide (CHO). Noteworthily, In/Na chloro complex 1 has been shown to give high copolymerization selectivity possessing >99% carbonate repeated units for CO2-derived poly(cyclohexene carbonate) production and displayed a turnover number of >1400 under the optimized conditions. Apart from the CO2/CHO copolymerization, the same complex was capable of mediating the CO2-copolymerization of 4-vinyl-1,2-cyclohexene oxide or cyclopentene oxide to deliver the related CO2-based polycarbonates. To the best of our knowledge, complex 1 in this work appears to be the first example of In/Na halide complex-promoted CO2/epoxide copolymerization that enabled the generation of aliphatic polycarbonates with good productivity and high product selectivity.

Efficient cyanosilylation of carbonyls using a well-defined dimeric sodium complex

We present the synthesis and structural characterization of a novel dimeric sodium complex with the chemical composition [{Ph2Si(H)PhN}Na(THF)2]2 (Na-1) supported by N,1,1-triphenylsilanamine fragment. The single-crystal X-ray diffraction analysis of complex Na-1 in the solid state reveals the coordination of sodium ion with N and O atoms of the triphenylsilanamine unit, forming a four-membered ring. The sodium complex also demonstrates excellent activity as a pre-catalyst towards the cyanosilylation of a wide array of ketones with trimethylsilyl cyanide (TMSCN) to afford trimethylsilyloxypropanenitriles in excellent yield (up to 99 %) in a shorter time under mild and solvent-free reaction conditions and exhibits a greater tolerance to a variety of ketones bearing electron-withdrawing and electron-donating functional groups. The plausible mechanism of cyanosilylation of ketones catalyzed by the complex Na-1 is also proposed.

Differential expression of ion channel coding genes in the endometrium of women experiencing recurrent implantation failures

Our study probed the differences in ion channel gene expression in the endometrium of women with Recurrent Implantation Failure (RIF) compared to fertile women. We analyzed the relative expression of genes coding for T-type Ca2+, ENaC, CFTR, and KCNQ1 channels in endometrial samples from 20 RIF-affected and 10 control women, aged 22–35, via microarray analysis and quantitative real-time PCR. Additionally, we examined DNA methylation in the regulatory region of KCNQ1 using ChIP real-time PCR. The bioinformatics component of our research included Gene Ontology analysis, protein–protein interaction networks, and signaling pathway mapping to identify key biological processes and pathways implicated in RIF. This led to the discovery of significant alterations in the expression of ion channel genes in RIF women’s endometrium, most notably an overexpression of CFTR and reduced expression of SCNN1A, SCNN1B, SCNN1G, CACNA1H, and KCNQ1. A higher DNA methylation level of KCNQ1’s regulatory region was also observed in RIF patients. Gene-set enrichment analysis highlighted a significant presence of genes involved with ion transport and membrane potential regulation, particularly in sodium and calcium channel complexes, which are vital for cation movement across cell membranes. Genes were also enriched in broader ion channel and transmembrane transporter complexes, underscoring their potential extensive role in cellular ion homeostasis and signaling. These findings suggest a potential involvement of ion channels in the pathology of implantation failure, offering new insights into the mechanisms behind RIF and possible therapeutic targets.

Introducing Cationic Selenium-Containing Triazapentadiene Ligand Framework: Synthesis, Coordination Chemistry, and Antifungal Activity.

Positively charged ligands are scarce. Here, we report the synthesis of unprecedented cationic selenium-containing triazapentadiene ligand framework. The reaction between 2-pyridylselenyl reagents and NaN(CN)2 in a 2:1 ratio produces the sodium complexes featuring the cationic selenium-containing triazapentadiene (SeTAP) ligand. The sodium-to-metal transmetalation allows facile preparation of SeTAP metal complexes, as exemplified by the reactions with CuCl2, AgNO3, NaAuCl4, and FeCl3. Density functional theory calculations have been used to analyze and characterize the chalcogen bonding interactions observed in the solid state for these compounds. Moreover, antifungal properties of the SeTAP ligand and its metal complexes were screened for in vitro activity against several phytopathogenic fungi. Phoma eupyrena exhibited prominent sensitivity against the action of most of the tested compounds.

Diversity of Structures and Bonding in Alkali Metal Ureaphosphanes

AbstractWhile organoelement compounds of lithium, sodium and potassium have been much studied for decades and consequently have found forests of applications, those of the heavier alkali metals, rubidium and caesium would barely manage to fill a tree. However, recently the literature has seen some little growth spurts with these metals, hinting at a possible fertile future in areas such as homogeneous catalysis provided more work is put into their fundamental development. Here we report the synthesis and crystal structures of lithium, rubidium and caesium derivatives of the ureaphosphane Ph2PCH2CH2NHC(=O)NHPh, chosen because it offers O, N, P, and π‐coordination sites. Though one may expect such alkali metal compounds to be essentially similar, the caesium complex has novel features where Cs+ engages in a side‐on coordination to the C=O bond and in a weak bond to the P centre, both of which are absent in the Rb structure. Less surprisingly, the lithium derivative is tetrameric in contrast to the infinite networks of the rubidium and caesium structures. All alkali metal derivatives were made with deprotonating the ureaphosphane by a suitable base, including the sodium and potassium complexes though these two complexes could not be obtained in a crystalline form.

Oxidized Sulfur Species in Slab Fluids as a Source of Enriched Sulfur Isotope Signatures in Arcs

AbstractRecycling of oxidized sulfur from subducting slabs to the mantle wedge provides simultaneous explanations for the elevated oxygen fugacity (fO2) in subduction zones, their high hydrothermal and magmatic sulfur outputs, and the enriched sulfur isotopic signatures (i.e., δ34S > 0‰) of these outputs. However, a quantitative understanding of the abundance and speciation of sulfur in slab fluids consistent with high pressure experiments is lacking. Here we analyze published experimental data for anhydrite solubility in H2O‐NaCl solutions to calibrate a high‐pressure aqueous speciation model of sulfur within the framework of the deep earth water model. We characterize aqueous complexes, required to account for the high experimental anhydrite solubilities. We then use this framework to predict the speciation and solubility of sulfur in chemically complex fluids in equilibrium with model subducting mafic and ultramafic lithologies, from 2 to 3 GPa and 400 to 800°C at log fO2 from FMQ‐2 to FMQ+4. We show that sulfate complexes of calcium and sodium markedly enhance the stability of sulfate in moderately oxidized fluids in equilibrium with pyrite at fO2 conditions of FMQ+1 to +2, causing large sulfur isotope fractionations up to 10‰ in the fluid relative to the slab. Such fluids could impart oxidized, sulfur‐rich and high δ34S signatures to the mantle wedge that are ultimately transferred to arc magmas, without the need to invoke 34S‐rich subducted lithologies.

Hydrothermal syntheses, structures and properties of two zinc complexes based on an azobenzene carboxylate ligand

Abstract Two zinc complexes [Zn(LH)2(phen)] (1) and [Zn(L)(H2O)] n (2) (LH− = 2-hydroxy-5-((3-nitrophenyl)azo)-benzoate, phen = 1,10-phenanthroline) were synthesized by hydrothermal methods and characterized by elemental analysis and IR spectroscopy. Complexes 1 and 2 crystallize in mononuclear and polymeric structures, respectively, where ligands L 2− are coordinated to the zinc ions via their carboxylate and phenolate groups in η 2,μ 2,κ 2 and η 2,μ 2,κ 1 mode, respectively. Introduction of the auxiliary chelating phen ligand results in the chelation of the zinc ions in 1 through both the phen ligand and the carboxylate group of the first LH− anion assisted further by the monodentate carboxylate group of the second LH− anion. In complex 2 the L 2− anions act as tridentate ligands utilizing their carboxylate and phenolate groups to coordinate to three zinc ions. The phenolate oxygen atom bridges two zinc ions resulting in the generation of a layer structure. Fluorescence measurements have indicated that complexes 1 and 2 exhibit similar luminescence emissions around 393 and 387 nm, respectively, which originate from intra-ligand π-π* transitions. The emission intensities were strengthened relative to the sodium complex NaLH owing to the enhancement of the rigidity of the aromatic system through the coordination interactions of the ligands with the more tightly bound zinc ions. Furthermore, the suspension of complex 2 can be used to selectively detect Fe3+ cations via the luminescence quenching process.

Pervaporation Membranes Based on Polyelectrolyte Complex of Sodium Alginate/Polyethyleneimine Modified with Graphene Oxide for Ethanol Dehydration.

Pervaporation is considered the most promising technology for dehydration of bioalcohols, attracting increasing attention as a renewable energy source. In this regard, the development of stable and effective membranes is required. In this study, highly efficient membranes for the enhanced pervaporation dehydration of ethanol were developed by modification of sodium alginate (SA) with a polyethylenimine (PEI) forming polyelectrolyte complex (PEC) and graphene oxide (GO). The effect of modifications with GO or/and PEI on the structure, physicochemical, and transport characteristics of dense membranes was studied. The formation of a PEC by ionic cross-linking and its interaction with GO led to changes in membrane structure, confirmed by spectroscopic and microscopic methods. The physicochemical properties of membranes were investigated by a thermogravimetric analysis, a differential scanning calorimetry, and measurements of contact angles. The theoretical consideration using computational methods showed favorable hydrogen bonding interactions between GO, PEI, and water, which caused improved membrane performance. To increase permeability, supported membranes without treatment and cross-linked were developed by the deposition of a thin dense layer from the optimal PEC/GO (2.5%) composite onto a developed porous substrate from polyacrylonitrile. The cross-linked supported membrane demonstrated more than two times increased permeation flux, higher selectivity (above 99.7 wt.% water in the permeate) and stability for separating diluted mixtures compared to the dense pristine SA membrane.

A theoretical study on 1H-indole-2,3-dione complexes with lithium, sodium, and potassium cations.

A comparative study of the change in different properties of electronic and structural of the free 1H-indole-2,3-dione molecule and its complexes has been obtained. HOMA analysis was performed to investigate the effects of lithium sodium and potassium cations on the aromaticity of lithium sodium and potassium complexes of 1H-indole-2,3-dione. Several 1H-indole-2,3-dione complexes with lithium, sodium, and potassium cations were optimized at the B3LYP/6-311G(d,p) level. The cation and π interaction has been investigated from different aspects, including interaction energy calculations, charge transfer values, and changes in the aromaticity of the ring upon complexation. The charge transfer and natural population analysis for the complexes were performed with the natural bond orbital (NBO) analysis. The properties of bond critical points in complexes were studied by applying the quantum theory of atoms in molecules (QTAIM). Finally, the aromaticity change of phenyl induced upon complex formation was evaluated by applying the harmonic oscillator model of aromaticity (HOMA). [Li-INa]+ and [[Li-INb]+ were optimized with the wB97XD function using a version of Grimme's D2 dispersion model, and the absorption energy was compared with the calculation made with the B3LYP functional.

Soy protein isolate/carboxymethyl cellulose sodium complexes system stabilized high internal phase Pickering emulsions: Stabilization mechanism based on noncovalent interaction

The interactions between carboxymethyl cellulose sodium and proteins can regulate the interfacial and rheological properties of HIPEs, which plays a leading role in the stabilities of HIPEs. This article prepared various ratios of soluble soy protein isolate/carboxymethyl cellulose sodium (SPI/CMC) complexes in different proportions and examined the impact of various ratios of complexes on the structure and interface properties of complexes systems. Additionally, it explored the co-emulsification mechanism of HIPEs using SPI and CMC. At appropriate ratios of SPI/CMC, SPI and CMC mainly combine through non covalent binding and form complexes with smaller particle sizes and stronger electrostatic repulsion. The interfacial properties indicated that adding appropriate CMC increased the pliability and reduced the interfacial tension, while also enhancing the wettability of SPI/CMC complexes. At the ratio of 2:1, the SPI/CMC complexes-stabilized HIPPEs exhibited smaller oil droplets size, tighter droplet packing, and thicker interfacial film through the bridging of droplets and the generation of stronger gel-like network structures to prevent the coalescence/flocculation of droplets. These results suggested that the appropriate ratios of SPI/CMC can improve the physical stability of HIPEs by changing the structure and interface characteristics of the SPI/CMC complexes. This work provided theoretical support for stable HIPEs formed with protein-polysaccharide complexes.

Enhancing the Cation-Binding Ability of Fluorescent Calixarene Derivatives: Structural, Thermodynamic, and Computational Studies.

Novel fluorescent calix[4]arene derivatives L1 and L2 were synthesized by introducing phenanthridine moieties at the lower calixarene rim, whereby phenanthridine groups served as fluorescent probes and for cation coordination. To enhance the cation-binding ability of the ligands, besides phenanthridines, tertiary-amide or ester functionalities were also introduced in the cation-binding site. Complexation of the prepared compounds with alkali metal cations in acetonitrile (MeCN), methanol (MeOH), ethanol (EtOH), N,N-dimethylformamide (DMF), and dimethyl sulfoxide (DMSO) was investigated at 25 °C experimentally (UV spectrophotometry, fluorimetry, microcalorimetry, and in the solid state by X-ray crystallography) and by means of computational techniques (classical molecular dynamics and DFT calculations). The thermodynamic parameters (equilibrium constants and derived standard reaction Gibbs energies, reaction enthalpies, and entropies) of the corresponding reactions were determined. The tertiary-amide-based compound L1 was found to have a much higher affinity toward cations compared to ester derivative L2, whereby the stabilities of the ML1+ and ML2+ complexes were quite solvent-dependent. The stability decreased in the solvent order: MeCN ≫ EtOH > MeOH > DMF > DMSO, which could be explained by taking into account the differences in the solvation of the ligands as well as free and complexed alkali metal cations in the solvents used. The obtained thermodynamic quantities were thoroughly discussed regarding the structural characteristics of the studied compounds, as well as the solvation abilities of the solvents examined. Molecular and crystal structures of acetonitrile and water solvates of L1 and its sodium complex were determined by single-crystal X-ray diffraction. The results of computational studies provided additional insight into the L1 and L2 complexation properties and structures of the ligands and their cation complexes.

Direct addition of vanillin improved the physicochemical properties and antibacterial activities of gelatin/sodium carboxymethyl cellulose composite film

Green packaging films made of natural macromolecular polymers can be used for food packaging, the performance of such packaging films is not satisfactory. Alternatively, crosslinkers are often used to compensate for the defects. However, studies on edible aromatic substances as cross-linking agents and their addition methods have been neglected. In this study, vanillin was added to gelatin (G) and carboxymethylcellulose sodium (CMC-Na, C) complex coacervation system in two ways: direct addition (GC-D) and emulsification addition (GC-E), and two different vanillin-polysaccharides-proteins composite films were prepared. Meanwhile, the effects of vanillin amount on physicochemical and functional properties of the composite films were explored. Results showed that vanillin significantly reduced the tensile strength (TS) of GC-D films, but significantly increased the GC-E films’ TS (P < 0.05). The TS of GC-D film (61.75 MPa) and GC-E film (56.66 MPa) reached the maximum with 3% vanillin addition. Vanillin significantly reduced the UV transmittance of the two films, while tended to increase the water contact angle. XRD and FTIR analysis found that vanillin played a cross-linking role with protein imino groups in the composite system. The SEM showed that GC-D films had good microstructure, but GC-E films had honeycomb-like surface. Finally, the two films had good soil degradability and antibacterial property on Escherichia coli and Staphylococcus aureus, among which GC-D films had better antibacterial effect. In summary, this study showed that vanillin could be used as a cross-linking agent to strengthen protein-polysaccharide-based composite film, and different addition methods and vanillin amounts could significantly affect the physicochemical and functional properties of GC composite film, which provided a new idea for the development of new environmentally friendly food packaging films.

Polyphenol-mediated sandwich-like coating promotes endothelialization and vascular healing

Drug-eluting stents have become one of the most effective methods to treat cardiovascular diseases. However, this therapeutic strategy may lead to thrombosis, stent restenosis, and intimal hyperplasia and prevent re-endothelialization. In this study, we selected 3-aminophenylboronic acid-modified hyaluronic acid and carboxylate chitosan as polyelectrolyte layers and embedded an epigallocatechin-3-gallate–tanshinone IIA sulfonic sodium (EGCG–TSS) complex to develop a sandwich-like layer-by-layer coating. The introduction of a functional molecular EGCG–TSS complex improved not only the biocompatibility of the coating but also its stability by enriching the interaction between the polyelectrolyte coatings through electrostatic interactions, hydrogen bonding, π–π stacking, and covalent bonding. We further elucidated the effectiveness of sandwich-like coatings in regulating the inflammatory response, smooth muscle cell growth behavior, stent thrombosis and restenosis suppression, and vessel re-endothelialization acceleration via in vivo and in vitro. Conclusively, we demonstrated that sandwich-like coating assisted by an EGCG–TSS complex may be an effective surface modification strategy for cardiovascular therapeutic applications.

Crystal-to-crystal investigations of highly thermally stable three-dimensional coordination polymer based on sodium(I) ions and 4,4’-stilbenedicarboxylic acid

The new three-dimensional coordination polymer termed {[Na&lt;sub&gt;2&lt;/sub&gt;SDC(H&lt;sub&gt;2&lt;/sub&gt;O)]}&lt;sub&gt;n&lt;/sub&gt; (SDC&lt;sup&gt;2-&lt;/sup&gt;= C&lt;sub&gt;16&lt;/sub&gt;H&lt;sub&gt;10&lt;/sub&gt;O&lt;sub&gt;4&lt;/sub&gt;&lt;sup&gt;2-&lt;/sup&gt;) has been synthesized using workstation Easymax 102 while controlling the conditions and monitoring in-situ reagents. The metal complex was obtained in the reaction of sodium hydroxide with a suspension of 4,4’-stilbenedicarboxylic acid in aqueous medium. The compound was characterized by elemental analysis, single crystal, and powder X-ray diffraction methods, ATR-FTIR spectroscopy, SEM and optical microscopy, TG-DSC and TG-FTIR thermal analysis in air and nitrogen atmosphere. In the crystal structure of {[Na&lt;sub&gt;2&lt;/sub&gt;SDC(H&lt;sub&gt;2&lt;/sub&gt;O)]}&lt;sub&gt;n&lt;/sub&gt; appears penta- and hexacoordinated sodium atoms joined by octa- and decadentate SDC2- linkers. Aqua ligand acts as bridge between Na1 and Na2 atoms. The as-synthesized sodium complex is thermally stable up to 86&lt;sup&gt;o&lt;/sup&gt;C whereas its dehydrated form has extreme stability up to 491&lt;sup&gt;o&lt;/sup&gt;C. Removal of water molecule leads to the crystal-to-crystal transformation yielded changes in coordination modes of COO groups. Reversibility of the hydration process in the studied complex was also examined.

Aminosilyl-substituted cyclopentadienyl complexes of alkali metals

Abstract (Pyrrolidinyldimethylsilyl)tetramethylcyclopentadienide complexes of lithium, sodium and potassium were synthesized and characterized, including crystal structure determinations. The lithium cyclopentadienide compound was used as a Cp transfer reagent to prepare the corresponding ferrocene, stannocene and plumbocene.

Chemical and Electrochemical Reductions of Monoiminoacenaphthenes.

Redox properties of monoiminoacenaphthenes (MIANs) were studied using various electrochemical techniques. The potential values obtained were used for calculating the electrochemical gap value and corresponding frontier orbital difference energy. The first-peak-potential reduction of the MIANs was performed. As a result of controlled potential electrolysis, two-electron one-proton addition products were obtained. Additionally, the MIANs were exposed to one-electron chemical reduction by sodium and NaBH4. Structures of three new sodium complexes, three products of electrochemical reduction, and one product of the reduction by NaBH4 were studied using single-crystal X-ray diffraction. The MIANs reduced electrochemically by NaBH4 represent salts, in which the protonated MIAN skeleton acts as an anion and Bu4N+ or Na+ as a cation. In the case of sodium complexes, the anion radicals of MIANs are coordinated with sodium cations into tetranuclear complexes. The photophysical and electrochemical properties of all reduced MIAN products, as well as neutral forms, were studied both experimentally and quantum-chemically.

Phase Behavior of Aqueous Mixtures of Sodium Alginate with Fish Gelatin: Effects of pH and Ionic Strength.

The phase behavior of aqueous mixtures of fish gelatin (FG) and sodium alginate (SA) and complex coacervation phenomena depending on pH, ionic strength, and cation type (Na+, Ca2+) were studied by turbidimetric acid titration, UV spectrophotometry, dynamic light scattering, transmission electron microscopy and scanning electron microscopy for different mass ratios of sodium alginate and gelatin (Z = 0.01-1.00). The boundary pH values determining the formation and dissociation of SA-FG complexes were measured, and we found that the formation of soluble SA-FG complexes occurs in the transition from neutral (pHc) to acidic (pHφ1) conditions. Insoluble complexes formed below pHφ1 separate into distinct phases, and the phenomenon of complex coacervation is thus observed. Formation of the highest number of insoluble SA-FG complexes, based on the value of the absorption maximum, is observed at рHopt and results from strong electrostatic interactions. Then, visible aggregation occurs, and dissociation of the complexes is observed when the next boundary, pHφ2, is reached. As Z increases in the range of SA-FG mass ratios from 0.01 to 1.00, the boundary values of рНc, рHφ1, рHopt, and рHφ2 become more acidic, shifting from 7.0 to 4.6, from 6.8 to 4.3, from 6.6 to 2.8, and from 6.0 to 2.7, respectively. An increase in ionic strength leads to suppression of the electrostatic interaction between the FG and SA molecules, and no complex coacervation is observed at NaCl and CaCl2 concentrations of 50 to 200 mM.

Water-Soluble Chiral Cyclic Peptoids and Their Sodium and Gadolinium Complexes: Study of Conformational and Relaxometric Properties.

Cyclic peptoids are macrocyclic oligomers of N-substituted glycines with specific folding abilities and excellent metal binding properties. In this work, we show how strategic positioning of chiral (S)- and (R)-(1-carboxyethyl)glycine units influences the conformational stability of water-soluble macrocyclic peptoids as sodium complexes. The reported results are based on nuclear magnetic resonance spectroscopy, extensive computational studies, and X-ray diffraction analysis using single crystals grown from aqueous solutions. The studies include 1H relaxometric investigations of hexameric cyclic peptoids in the presence of the Gd3+ ion to assess their thermodynamic stabilities and relaxivities.

Preparation, crystal structure, time-dependent density theory and properties of a novel organic-inorganic hybrid up-conversion luminescence tetranuclear complex

A novel up-conversion luminescence tetranuclear sodium complex [Na4(5-(carboxymethyl 2-oxo-propyl) amino isophthalic acid)(H2O)9] is synthesized by a solvothermal reaction, and its crystal structure is determined by single-crystal X-ray diffraction. The title complex crystallizes as a triclinic system with the P [Formula: see text] space group and exists as an isolated tetranuclear complex. Numerous intermolecular hydrogen bonds and van der waals forces form a three-dimensional supramolecular network. Solid-state diffuse reflectance data show that there is a wide optical band gap of 2.91 eV. The solid-state photoluminescence spectrum reveals that the complex shows an up-conversion emission in the blue region of the light spectrum. Time-dependent density functional theory calculations reveal that this emission can be attributed to ligand-to-ligand charge transfer.