Complex Macromolecular Architectures Research Articles

Open-vessel polymerization of N-carboxyanhydride (NCA) for polypeptide synthesis.

Synthetic polypeptides, also known as poly(α-amino acids), have the same polyamide backbone structures as natural proteins and peptides. As an important class of biomaterials, polypeptides have been widely used because of their biocompatibility, bioactivity and biodegradability. Ring-opening polymerization of N-carboxyanhydride (NCA) is a classical and widely used method for the synthesis of polypeptides. The dominantly used primary amine-initiated NCA polymerization can yield well-defined polymers and complex macromolecular architectures, but the reaction is slow and sensitive to moisture, making it necessary to use anhydrous solvents and a glovebox. One solution is to use lithium hexamethyldisilazide (LiHMDS) as the initiator, as described in this protocol. LiHMDS-initiated NCA polymerization is less sensitive to moisture and can be carried out in an open vessel outside the glovebox. It is also very fast; the reaction can be complete within 5 min to produce 30-mer polypeptides. In this protocol, poly(γ-benzyl-L-glutamate) is prepared as an example, but the protocol can easily be adapted to the synthesis of other polypeptides by generating NCAs from different amino acids, making it particularly suitable for the efficient parallel synthesis of polypeptide libraries. We provide detailed procedures for NCA synthesis and purification, the method of polymer end-group modification and measurement of polymerization kinetics and reactivity ratio. The procedure for synthesis of monomers and polymerization to form polypeptides requires <1 d. The superfast and open-vessel NCA polymerization method described here will probably enable a wide range of applications in the synthesis and functional study of polypeptide biomaterials.

Hydrophilic Poly(meth)acrylates by Controlled Radical Branching Polymerization: Hyperbranching and Fragmentation.

Topology significantly impacts polymer properties and applications. Hyperbranched polymers (HBPs) synthesized via atom transfer radical polymerization (ATRP) using inimers typically exhibit broad molecular weight distributions and limited control over branching. Alternatively, copolymerization of inibramers (IB), such as α-chloro/bromo acrylates with vinyl monomers, yields HBPs with precise and uniform branching. Herein, we described the synthesis of hydrophilic HB polyacrylates in water by copolymerizing a water-soluble IB, oligo(ethylene oxide) methyl ether 2-bromoacrylate (OEOBA), with various hydrophilic acrylate comonomers. Visible-light-mediated controlled radical branching polymerization (CRBP) with dual catalysis using eosin Y (EY) and copper complexes resulted in HBPs with various molecular weights (M n = 38 000 to 170 000) and degrees of branching (2%-24%). Furthermore, the optimized conditions enabled the successful application of the OEOBA to synthesize linear-hyperbranched block copolymers and hyperbranched polymer protein hybrids (HB-PPH), demonstrating its potential to advance the synthesis of complex macromolecular architecture under environmentally benign conditions. Copolymerization of hydrophilic methacrylate monomer, oligo(ethylene oxide) methyl ether methacrylate (OEOMA500), and inibramer OEOBA was accompanied by fragmentation via β-carbon C-C bond scission and subsequent growth of polymer chains from the fragments. Furthermore, computational studies investigating the fragmentation depending on the IB and comonomer structure supported the experimental observations. This work expands the toolkit of water-soluble inibramers for CRBP and highlights the critical influence of the inibramer structure on reaction outcomes.

Using RAFT Polymerization Methodologies to Create Branched and Nanogel-Type Copolymers.

This review aims to highlight the most recent advances in the field of the synthesis of branched copolymers and nanogels using reversible addition-fragmentation chain transfer (RAFT) polymerization. RAFT polymerization is a reversible deactivation radical polymerization technique (RDRP) that has gained tremendous attention due to its versatility, compatibility with a plethora of functional monomers, and mild polymerization conditions. These parameters lead to final polymers with good control over the molar mass and narrow molar mass distributions. Branched polymers can be defined as the incorporation of secondary polymer chains to a primary backbone, resulting in a wide range of complex macromolecular architectures, like star-shaped, graft, and hyperbranched polymers and nanogels. These subcategories will be discussed in detail in this review in terms of synthesis routes and properties, mainly in solutions.

Streamlining the Generation of Advanced Polymer Materials Through the Marriage of Automation and Multiblock Copolymer Synthesis in Emulsion.

Synthetic polymers are of paramount importance in modern life - an incredibly wide range of polymeric materials possessing an impressive variety of properties have been developed to date. The recent emergence of artificial intelligence and automation presents a great opportunity to significantly speed up discovery and development of the next generation of advanced polymeric materials. We have focused on the high-throughput automated synthesis of multiblock copolymers that comprise three or more distinct polymer segments of different monomer composition bonded in linear sequence. The present work has exploited automation to prepare high molar mass multiblock copolymers (typically>100,000 g mol-1) using reversible addition-fragmentation chain transfer (RAFT) polymerization in aqueous emulsion. A variety of original multiblock copolymers have been synthesised via a Chemspeed robot, exemplified by a multiblock copolymer comprising thirteen constituent blocks. Moreover, libraries of copolymers of randomized monomer compositions (acrylates, acrylamides, methacrylates, and styrenes), block orders, and block lengths were also generated, thereby demonstrating the robustness of our synthetic approach. One multiblock copolymer contained all four monomer families listed in the pool, which is unprecedented in the literature. The present work demonstrates that automation has the power to render complex and laborious syntheses of such unprecedented materials not just possible, but facile and straightforward, thus representing the way forward to the next generation of complex macromolecular architectures.

Streamlining the Generation of Advanced Polymer Materials Through the Marriage of Automation and Multiblock Copolymer Synthesis in Emulsion

AbstractSynthetic polymers are of paramount importance in modern life ‐ an incredibly wide range of polymeric materials possessing an impressive variety of properties have been developed to date. The recent emergence of artificial intelligence and automation presents a great opportunity to significantly speed up discovery and development of the next generation of advanced polymeric materials. We have focused on the high‐throughput automated synthesis of multiblock copolymers that comprise three or more distinct polymer segments of different monomer composition bonded in linear sequence. The present work has exploited automation to prepare high molar mass multiblock copolymers (typically&gt;100,000 g mol−1) using reversible addition‐fragmentation chain transfer (RAFT) polymerization in aqueous emulsion. A variety of original multiblock copolymers have been synthesised via a Chemspeed robot, exemplified by a multiblock copolymer comprising thirteen constituent blocks. Moreover, libraries of copolymers of randomized monomer compositions (acrylates, acrylamides, methacrylates, and styrenes), block orders, and block lengths were also generated, thereby demonstrating the robustness of our synthetic approach. One multiblock copolymer contained all four monomer families listed in the pool, which is unprecedented in the literature. The present work demonstrates that automation has the power to render complex and laborious syntheses of such unprecedented materials not just possible, but facile and straightforward, thus representing the way forward to the next generation of complex macromolecular architectures.

PH-Controlled Reversible Folding of Copolymers via Formation of β-sheet Secondary Structures.

Protein functions are enabled by their perfectly arranged 3D structure, which is the result of a hierarchical intramolecular folding process. Sequence-defined polypeptide chains form locally ordered secondary structures (i.e., α-helix and β-sheet) through hydrogen bonding between the backbone amides, shaping the overall tertiary structure. To generate similarly complex macromolecular architectures based on synthetic materials, a plethora of strategies have been developed to induce and control the folding of synthetic polymers. However, the degree of complexity of the structure-driving ensemble of interactions demonstrated by natural polymers is unreached, as synthesizing long sequence-defined polymers with functional backbones remains a challenge. Herein, we report the synthesis of hybrid peptide-N,N-Dimethylacrylamide copolymers via radical Ring-Opening Polymerization (rROP) of peptide containing macrocycles. The resulting synthetic polymers contain sequence-defined regions of β-sheet encoding amino acid sequences. Exploiting the pH responsiveness of the embedded sequences, protonation or deprotonation in water induces self-assembly of the peptide strands at an intramacromolecular level, driving polymer chain folding via formation of β-sheet secondary structures. We demonstrate that the folding behavior is sequence dependent and reversible.

PH‐Controlled Reversible Folding of Copolymers via Formation of β‐sheet Secondary Structures

AbstractProtein functions are enabled by their perfectly arranged 3D structure, which is the result of a hierarchical intramolecular folding process. Sequence‐defined polypeptide chains form locally ordered secondary structures (i.e., α‐helix and β‐sheet) through hydrogen bonding between the backbone amides, shaping the overall tertiary structure. To generate similarly complex macromolecular architectures based on synthetic materials, a plethora of strategies have been developed to induce and control the folding of synthetic polymers. However, the degree of complexity of the structure‐driving ensemble of interactions demonstrated by natural polymers is unreached, as synthesizing long sequence‐defined polymers with functional backbones remains a challenge. Herein, we report the synthesis of hybrid peptide‐N,N‐Dimethylacrylamide copolymers via radical Ring‐Opening Polymerization (rROP) of peptide containing macrocycles. The resulting synthetic polymers contain sequence‐defined regions of β‐sheet encoding amino acid sequences. Exploiting the pH responsiveness of the embedded sequences, protonation or deprotonation in water induces self‐assembly of the peptide strands at an intramacromolecular level, driving polymer chain folding via formation of β‐sheet secondary structures. We demonstrate that the folding behavior is sequence dependent and reversible.

Helical polyamines.

Polymer microstructures rely on tacticity, yet exploration in polyamines has focused predominantly on atactic polymers. We introduce a method to synthesize a diverse library of ortho and para-cyanobenzenesulfonyl-activated-methyl aziridines using R, S, and racemic alaninol. Living anionic ring-opening polymerization of racemic sulfonyl aziridines yields soluble polymers, while enantiomerically-pure sulfonyl aziridines follow a dispersion polymerization with complete monomer conversion giving access to stereoblock copolymers. Removal of activation groups is achieved using dodecanethiol and tert-butylimino-tri(pyrrolidino)phosphorane to obtain isotactic or atactic linear polypropylene imines (LPPIs). High-purity L-PPIs are obtained in salt and neutral forms with high yields. Stereoblock copolymers of poly-R-block-S-polysulfonamides and respective polypropylene imine stereoblocks are synthesized, revealing helical structures in water influenced by the monomer type and sequence in CD spectroscopy. Molecular dynamics simulations confirm the helical nature of isotactic LPPIs in water. Bulk characterization demonstrates the first crystalline isotactic polyamines via spherulite growth in polarized light, atomic force microscopy and XRD analyses. In cell-transfection studies, the synthesized isotactic LPPIs exhibit lower toxicity and transfection efficiency than commercial hyperbranched polyethylene imine, with longer chains showing increased transfection efficiency. These isotactic polymers open avenues for complex macromolecular architectures with optically active polyamines akin to poly(amino acid)s but lacking hydrolytically cleavable amide links.

Multi-Stimuli Responsive Sequence Defined Multi-Arm Star Diblock Copolymers for Controlled Drug Release.

Star-shaped polymeric materials provide very high efficiency toward various engineering and biomedical applications. Due to the absence of straightforward and versatile synthetic protocols, the synthesis of sequence-defined star-shaped (co)polymers has remained a major challenge. Here, a facile approach is developed that allows synthesis of a series of unprecedented discrete, multifunctional four-, six-, and eight-arm star-shaped complex macromolecular architectures based on a well-defined triple (thermo/pH/light)-stimuli-responsive poly(N-isopropylacrylamide)-block-poly(methacrylic acid)-umbelliferone (PNIPAM-b-PMAA)n-UMB diblock copolymer, based on temperature responsive PNIPAM segment, pH-responsive PMAA segment, and photoresponsive UMB end groups. Thus, developed star-shaped copolymers self-assemble in water to form spherical nanoaggregates of diameter 90 ± 20 nm, as measured by FESEM. The star-shaped copolymer's response to external stimuli has been assessed against changes in temperature, pH, and light irradiation. The star-shaped copolymer was employed as a nanocarrier for pH responsive release of an anticancer drug, doxorubicin. This study opens up new avenues for efficient star-shaped macromolecular architecture construction for engineering and biomedical applications.

Synthesis and Thermal Analysis of Non-Covalent PS-b-SC-b-P2VP Triblock Terpolymers via Polylactide Stereocomplexation.

Polylactides (PLAs) are thermoplastic materials known for their wide range of applications. Moreover, the equimolar mixtures of poly(L-Lactide) (PLLA) and poly(D-Lactide) (PDLA) can form stereocomplexes (SCs), which leads to the formation of new non-covalent complex macromolecular architectures. In this work, we report the synthesis and characterization of non-covalent triblock terpolymers of polystyrene-b-stereocomplex PLA-b-poly(2-vinylpyridine) (PS-b-SC-b-P2VP). Well-defined ω-hydroxy-PS and P2VP were synthesized by “living” anionic polymerization high-vacuum techniques with sec-BuLi as initiator, followed by termination with ethylene oxide. The resulting PS-OH and P2VP-OH were used as macroinitiators for the ring-opening polymerization (ROP) of DLA and LLA with Sn(Oct)2 as a catalyst to afford PS-b-PDLA and P2VP-b-PLLA, respectively. SC formation was achieved by mixing PS-b-PDLA and P2VP-b-PLLA chloroform solutions containing equimolar PLAs segments, followed by precipitation into n-hexane. The molecular characteristics of the resulting block copolymers (BCPs) were determined by 1H NMR, size exclusion chromatography, and Fourier-transform infrared spectroscopy. The formation of PS-b-SC-b-P2VP and the effect of molecular weight variation of PLA blocks on the resulting polymers, were investigated by differential scanning calorimetry, X-ray powder diffraction, and circular dichroism spectroscopies.

Hybrid Arborescent Polypeptide-Based Unimolecular Micelles: Synthesis, Characterization, and Drug Encapsulation.

This paper reports novel hybrid arborescent polypeptides based on poly(γ-benzyl l-glutamate)-co-poly(γ-tert-butyl l-glutamate)-g-polysarcosine [P(BG-co-Glu(OtBu))-g-PSar]. The synthesis is launched by ring-opening polymerization (ROP) of N-carboxyanhydride of γ-benzyl l-glutamate (BG-NCA) and γ-tert-butyl l-glutamate (Glu(OtBu)-NCA) to synthesize a random copolymer P(BG-co-Glu(OtBu)) serving as a precursor for the arborescent system, followed by deprotection of the tert-butyl (tBu) groups to afford free COOH moieties serving as coupling sites. Two copolymerization reactions were carried out to afford the side chains. One type of side chain was a random copolymer P(BG-co-Glu(OtBu)), while the other type was a triblock copolymer PGlu(OtBu)-b-PBG-b-PGlu(OtBu). The peptide coupling reactions were conducted between the COOH moieties on the precursor and the terminus amine on the chain end of the P(BG-co-Glu(OtBu)) random copolymer or the PGlu(OtBu)-b-PBG-b-PGlu(OtBu) triblock copolymer to obtain G0 polymers. Afterward, hydrolyzing the tBu moieties of the G0 substrates yielded randomly functionalized G0 and end-functionalized G0. Randomly functionalized G0 was used as a substrate for the next generation G1 (randomly functionalized and end-functionalized G1 after deprotection) or coated with polysarcosine (PSar) to gain G0-g-PSar. The G0 substrate prepared with the triblock copolymer PGlu(OtBu)-b-PBG-b-PGlu(OtBu) was only grafted with PSar after deprotection, resulting in G0-eg-PSar. Depending on the functionality mode of the G1 substrate, the PSar coating yielded two different graft polymers, G1-g-PSar and G1-eg-PSar, for randomly functionalized and end-functionalized G1, respectively. The PSar hydrophilic shell was decorated with the sequence of (arginine, glycine, and aspartic acid) tripeptides (RGD) as a targeting ligand to improve the potentiality of the arborescent unimolecular micelles as drug carriers. Preparative size exclusion chromatography (SEC) was used to fractionate these complex macromolecular architectures. Nuclear magnetic resonance (NMR), Fourier-transform infrared (FTIR), Raman spectroscopy, and SEC were used for molecular characterization of all intermediate and final products and dynamic light scattering (DLS), transmission electron microscopy (TEM), and atomic force microscopy (AFM) for micellar characterization. A comparison between randomly grafted (g) and end-grafted (eg) unimolecular micelles demonstrates that the former has an undefined core-shell structure, unlike its end-grafted analog. In addition, this study has proved that decoration of the shell with RGD contributed to avoiding micelle aggregation but limited chemotherapy agent encapsulation. However, more than their naked analog, the sustained release was noticeable in decorated micelles. Doxorubicin was utilized as a chemotherapy model, and loading was achieved successfully by physical entrapment.

Continuum dynamics and statistical correction of compositional heterogeneity in multivalent IDP oligomers resolved by single-particle EM

Multivalent intrinsically disordered protein (IDP) complexes are prevalent in biology and act in regulation of diverse processes, including transcription, signaling events, and the assembly and disassembly of complex macromolecular architectures. These systems pose significant challenges to structural investigation, due to continuum dynamics imparted by the IDP and compositional heterogeneity resulting from characteristic low-affinity interactions. Here, we developed a modular pipeline for automated single-particle electron microscopy (EM) distribution analysis of common but relatively understudied semi-ordered systems: ‘beads-on-a-string’ assemblies, composed of IDPs bound at multivalent sites to the ubiquitous ∼20 kDa cross-linking hub protein LC8. This approach quantifies conformational geometries and compositional heterogeneity on a single-particle basis, and statistically corrects spurious observations arising from random proximity of bound and unbound LC8. The statistical correction is generically applicable to oligomer characterization and not specific to our pipeline. Following validation, the approach was applied to the nuclear pore IDP Nup159 and the transcription factor ASCIZ. This analysis unveiled significant compositional and conformational diversity in both systems that could not be obtained from ensemble single particle EM class-averaging strategies, and new insights for exploring how these architectural properties might contribute to their physiological roles in supramolecular assembly and transcriptional regulation. We expect that this approach may be adopted to many other intrinsically disordered systems that have evaded traditional methods of structural characterization.

Recent Advances in the Synthesis of Complex Macromolecular Architectures Based on Poly(N-vinyl pyrrolidone) and the RAFT Polymerization Technique.

Recent advances in the controlled RAFT polymerization of complex macromolecular architectures based on poly(N-vinyl pyrrolidone), PNVP, are summarized in this review article. Special interest is given to the synthesis of statistical copolymers, block copolymers, and star polymers and copolymers, along with graft copolymers and more complex architectures. In all cases, PNVP is produced via RAFT techniques, whereas other polymerization methods can be employed in combination with RAFT to provide the desired final products. The advantages and limitations of the synthetic methodologies are discussed in detail.

The ultimate Lewis acid catalyst: using tris(pentafluorophenyl) borane to create bespoke siloxane architectures.

The breadth of utility of a commercially available and stable strong Lewis acid catalyst, tris(pentafluorophenyl)borane, has been explored, highlighting its use towards a wide range of unique siloxane products and their corresponding applications. This article focuses on the variety of different outcomes that this impressive borane offers in controlled and selective manners by the variation of reaction conditions, precursor functionalities, reagent or catalyst loading, and the mechanistic considerations that contribute. With a predominant focus on the Piers-Rubinsztajn reaction and its modifications, tris(pentaflurophenyl)borane's utility is highlighted in the synthesis of linear, cyclic and macrocyclic siloxanes, aryl-/alkoxysiloxanes, and other bespoke products. The significance of the catalytic transformation within the field of siloxane chemistry is discussed alongside some of the challenges that arise from using the borane catalyst.

Cage-Shaped Polymers Synthesis: A Comprehensive State-of-the-Art.

Researchers have dedicated their efforts for the creation of a wide choice of complex and precise macromolecular architectures over the past 100 years. Among them, cyclic polymers benefit from their absence of terminal chains and from their singular topology to minimize their hydrodynamic volume in solution, increase their chemical stability, limit their number of possible conformations as well as a reduce their propensity to crystallize or to form entanglements in comparison to their acyclic counterparts. While monocyclic structures have already been widely investigated and reviewed, reports on more complex polycyclic structures are rare. In this regard, cage-shaped polymers-consisting of at least three polymer chains covalently interconnected through strictly two junction points-have received little attention over the past two decades. Although their synthesis is a worthy challenge, only a few synthetic methodologies of polymer cages were successfully developed so far. Thus, this review intends to highlight the key concepts of the conception of cage-shaped polymers in addition to propose an actual and exhaustive state-of-art concept of their synthesis to rationally promote the next-generation synthesis strategies.

Deep Learning of Binary Solution Phase Behavior of Polystyrene.

Predicting binary solution phase behavior of polymers has remained a challenge since the early theory of Flory-Huggins, hindering the processing, synthesis, and design of polymeric materials. Herein, we take a complementary data-driven approach by building a machine learning framework to make fast and accurate predictions of polymer solution cloud point temperatures. Using polystyrene, both upper and lower critical solution temperatures are predicted within experimental uncertainty (1-2 °C) with a deep neural network, Gaussian process regression (GPR) model, and a combination of polymer, solvent, and state features. The GPR model also enables intelligent exploration of solution phase space, where as little as 25 cloud points are required to make predictions within 2 °C for polystyrene of arbitrary molecular weight in cyclohexane. This study demonstrates the effectiveness of machine learning for the prediction of liquid-liquid equilibrium of polymer solutions and establishes a framework to incorporate other polymers and complex macromolecular architectures.

Statistical Correction of IDP Oligomer Valency by Iterative Synthetic Reconstruction of EM Micrographs

Multivalent intrinsically disordered protein (IDP) complexes control many diverse cellular functions, such as tuning levels of transcription, coordination of cell-signaling events and regulating the assembly/disassembly of complex macromolecular architectures. These systems are difficult to characterize structurally, due to inherent conformational and compositional heterogeneity. Although electron microscopy (EM) is a powerful tool for visualizing multivalent complexes, the IDPs themselves are “invisible” by EM, which poses challenges to traditional methods of image analysis and structural interpretation.

Nitroxide-Mediated Polymerization: A Versatile Tool for the Engineering of Next Generation Materials

Nitroxide-mediated polymerization (NMP) is a reversible-deactivation radical polymerization technique (RDRP) that facilitates the synthesis of well-defined and complex macromolecular architectures,...

In‐chain functionalized poly(ε‐caprolactone): A valuable precursor towards the synthesis of 3‐miktoarm star containing hyperbranched polyethylene

AbstractWell‐defined 3‐miktoarm star copolymer 3μ‐HBPE(PCL)2 (HBPE: hyperbranched polyethylene, PCL: poly[ε‐caprolactone]) was synthesized by combining chain walking polymerization (CWP), ring‐opening polymerization (ROP), and “click” chemistry. The synthetic methodology includes the following steps: (a) synthesis of in‐chain ethynyl‐functionalized PCL, (PCL)2‐C ≡ CH by ROP of ε‐caprolactone (CL) with ethylene‐functionalized solketal (3‐[prop‐2‐yn‐1‐yloxy] propane‐1,2‐diol) as difunctional initiator and phosphazene superbase t‐BuP2 as catalyst; (b) synthesis of azido‐functionalized hyperbranched PE (HBPE‐N3) by CWP of ethylene with α‐diimine‐Pd(II) catalyst, followed by quenching with excess 4‐vinylbenzyl chloride and transformation of chloro to azide group with sodium azide; and (c) “clicking” HBPE‐N3 and (PCL)2‐C ≡ CH using copper(I)‐catalyzed azide–alkyne cycloaddition. 1H NMR spectroscopy, gel permeation chromatography, Fourier‐transform infrared spectroscopy, and differential scanning calorimetry were used to determine the molecular characteristics and thermal properties of the polymers. Self‐assembly behavior of 3μ‐HBPE (PCL)2 in petroleum ether, a selective solvent for HBPE, was investigated by dynamic light scattering, atomic force microscopy, and transmission electron microscopy. The in‐chain alkyne‐functionalized poly(ε‐caprolactone) is a valuable precursor for PCL‐based complex macromolecular architectures.

Chemiluminescent Read-Out of Degradable Fluorescent Polymer Particles

The design of chemiluminescent degradable particles is largely an unexplored field. We, herein, pioneer self-reporting chemiluminescent microspheres, allowing one to readily monitor their degradati...