Complementary Fragments Research Articles

Zwitterionic Nanochannels in Covalent Organic Framework Membranes for Improved Flux and Antifouling Property.

Zwitterionic membranes demonstrate excellent antifouling property in water purification. The covalent organic frameworks (COFs), due to the ordered channels and abundant organic functional groups, have distinct superiority in constructing zwitterionic surfaces.Here, the zwitterionic COF membrane is prepared with precise framework structures and uniform charge distribution. The negatively charged 4,4'-diaminobiphenyl-2,2'-sisulphonic acid sodium (SA) and positively charged ethidium bromide (EB) fragments are used to react with 1,3,5-triformylphloroglucinol (TP) at the gas-liquid interface to prepare zwitterionic COF membrane. The complementary charged fragments in the inter-layer and inner-layer facilitate the formation of continuous and tight hydration layer on the membrane surface and pore walls to resist the adsorption of pollutants. The zwitterionic COF membrane effectively resists both negatively charged bovine serum albumin and positively charged lysozyme pollutants with flux recovery ratio (FRR) of 97% and 85%, respectively. Furthermore, the regular nano-channels and balanced interactions between water and surface/pore walls of the zwitterionic membrane result in outstanding permeability of up to 146 L m-2 h-1 bar-1 and excellent dye/salt separation selectivity. The water permeation and antifouling mechanism of membranes are elucidated by experimental and molecular dynamics calculation. Zwitterionic COF membranes can find promising applications in preparing high-performance antifouling membranes.

Temperature ratio RT = TL/TH of fully accelerated complementary fragments (used for TXE partition) obtained independently of prompt emission model calculations

Several refined prompt emission model codes, nowadays employed, use the partition of total excitation energy (TXE) according to the temperature ratio RT = TL/TH of fully accelerated fragments. In such codes RT is given as input, either as an unique value for all fragmentations or as a function of AH; This temperature ratio RT being obtained by fitting the experimental ν(A) data with the respective prompt emission model code. This paper proposes a method for obtaining “experimental RT(AH)” (also based on experimental ν(A)), but without resorting to prompt emission model calculations for the fit of ν(A) data. So that this is an independent method providing RT(AH) which can be employed by any prompt emission model code in which the TXE partition is done at the full acceleration according to RT given as input. A procedure which facilitates the parameterization of RT(AH) is proposed, too. A prediction of the RT(AH) shape at very high excitation energies of the fissioning nucleus is also reported. The comparison of RT(AH) ratios obtained from any TXE partition based on modeling at scission with those provided by the present method can constitute a supplementary validation of the respective modeling at scission.

Split Luciferase Molecular Tension Sensors for Bioluminescent Readout of Mechanical Forces in Biological Systems.

The ability of proteins to sense and transmit mechanical forces underlies many biological processes, but characterizing these forces in biological systems remains a challenge. Existing genetically encoded force sensors typically rely on fluorescence or bioluminescence resonance energy transfer (FRET or BRET) to visualize tension. However, these force sensing modules are relatively large, and interpreting measurements requires specialized image analysis and careful control experiments. Here, we report a compact molecular tension sensor that generates a bioluminescent signal in response to tension. This sensor (termed PILATeS) makes use of the split NanoLuc luciferase and consists of the H. sapiens titin I10 domain with the insertion of a 10-15 amino acid tag derived from the C-terminal β-strand of NanoLuc. Mechanical load across PILATeS mediates exposure of this tag to recruit the complementary split NanoLuc fragment, resulting in force-dependent bioluminescence. We demonstrate the ability of PILATeS to report biologically meaningful forces by visualizing forces at the interface between integrins and extracellular matrix substrates. We further use PILATeS as a genetically encoded sensor of tension experienced by the mechanosensing protein vinculin. We anticipate that PILATeS will provide an accessible means of visualizing molecular-scale forces in biological systems.

Self-Replicating DNA-Based Nanoassemblies.

The properties of DNA that make it an effective genetic material also allow it to be ideal for programmed self-assembly. Such DNA-programmed assembly has been utilized to construct responsive DNA origami and wireframe nanoassemblies, yet replicating these hybrid nanomaterials remains challenging. Here we report a strategy for replicating DNA wireframe nanoassemblies using the isothermal ligase chain reaction lesion-induced DNA amplification (LIDA). We designed a triangle wireframe structure that can be formed in one step by ring-closing of its linear analog. Introducing a small amount of the wireframe triangle to an excess of the linear analog and complementary fragments, one of which contains a destabilizing abasic lesion, leads to rapid, sigmoidal self-replication of the wireframe triangle via cross-catalysis. Using the same cross-catalytic strategy we also demonstrate rapid self-replication of a hybrid wireframe triangle containing synthetic vertices as well as the self-replication of circular DNA. This work reveals the suitability of isothermal ligase chain reactions such as LIDA to self-replicate complex DNA architectures, opening the door to incorporating self-replication, a hallmark of life, into biomimetic DNA nanotechnology.

Oxylipin biosynthesis via an unprecedented 16-hydroperoxide lyase pathway in green tissues of cucumber (Cucumis sativus L.) plants

The plant lipoxygenase cascade is a source of various regulatory oxylipins that play a role in cell signalling, stress adaptation, and immune response. Recently, we detected an unprecedented 16(S)-lipoxygenase, CsLOX3, in the leaves and fruit pericarp of cucumber (Cucumis sativus L.). In the present work, an array of products biosynthesized through the conversions of α-linolenic acid 16-hydroperoxide (16-HPOT) was detected. Firstly, a prominent 15-hydroxy-9,12-pentadecadienoic acid (Me/TMS) was detected, the product of hydroperoxide lyase (HPL) chain cleavage of 16-HPOT and further reduction of aldehyde 15-oxo-9,12-pentadecadienoic acid to alcohol. Besides, the presence of dicarboxylic acid, 3,6-pentadecadiene-1,15-dioic acid, was deduced from the detection of its catalytic hydrogenation product, pentadecane-1,15-dioic acid. Finally, 12,15-dihydroxypentadecanoic acid (Me/TMS) was detected amongst the hydrogenated products, thus indicating the presence of the parent 12,15-dihydroxy-9,13-pentadecadienoic acid. To confirm the proposed HPL chain cleavage, the 16(S)-HPOT was prepared and incubated with the recombinant cucumber HPL CYP74B6 enzyme. The CYP74B6 possessed high activity towards 16-HPOT. Chain cleavage yields the (9Z,12Z)-15-oxo-9,12-pentadecadienoic acid, undergoing a spontaneous isomerization into (9Z,13E)-15-oxo-9,13-pentadecadienoic acid. Thus, the cucumber plants as well as the recombinant cucumber HPL CYP74B6 possessed unprecedented 16-HPL activity, cleaving 16-HPOT into a C15 fragment, 15-oxo-9,12-pentadecadienoic acid, and a complementary volatile C3 fragment, propionic aldehyde. The 16-LOX/16-HPL route of oxylipin biosynthesis presents a novel facet of the plant LOX pathway.

Exon-junction complex association with stalled ribosomes and slow translation-independent disassembly

Exon junction complexes are deposited at exon-exon junctions during splicing. They are primarily known to activate non-sense mediated degradation of transcripts harbouring premature stop codons before the last intron. According to a popular model, exon-junction complexes accompany mRNAs to the cytoplasm where the first translating ribosome pushes them out. However, they are also removed by uncharacterized, translation-independent mechanisms. Little is known about kinetic and transcript specificity of these processes. Here we tag core subunits of exon-junction complexes with complementary split nanoluciferase fragments to obtain sensitive and quantitative assays for complex formation. Unexpectedly, exon-junction complexes form large stable mRNPs containing stalled ribosomes. Complex assembly and disassembly rates are determined after an arrest in transcription and/or translation. 85% of newly deposited exon-junction complexes are disassembled by a translation-dependent mechanism. However as this process is much faster than the translation-independent one, only 30% of the exon-junction complexes present in cells at steady state require translation for disassembly. Deep RNA sequencing shows a bias of exon-junction complex bound transcripts towards microtubule and centrosome coding ones and demonstrate that the lifetimes of exon-junction complexes are transcript-specific. This study provides a dynamic vision of exon-junction complexes and uncovers their unexpected stable association with ribosomes.

Scission Deformation of the ^{120}Cd/^{132}Sn Neutronless Fragmentation in ^{252}Cf(sf).

We report on a study of the radiative decay of fission fragments populated via neutronless fission of ^{252}Cf(sf). Applying the double-energy method a perfect mass identification is achieved for these rare events. In the specific case of the ^{120}Cd/^{132}Sn cold fragmentation, we find that ^{132}Sn is produced in its ground state. We can therefore directly measure the excitation energy of the complementary fragment, ^{120}Cd. The reproduction of the γ-ray spectrum, measured in coincidence with the neutronless fission events, is sensitive to the angular momentum distribution of the studied primary fragment. The latter estimated using a time-dependent collective Hamiltonian model, allows us to constrain for the first time the deformation (β_{2}≃0.4) of the studied fission fragment at scission. The present work demonstrates the high potential of the understudied neutronless fission channel for extracting detailed information on both fission fragments and process.

Abstract 2057: Monitoring cGAMP Biochemically and in cell using homogenous HTS formatted bioluminescent assay

Abstract The STimulator of INterferon Genes (STING) is a transmembrane protein located at the endoplasmic reticulum, which serves as a molecular hub in response to cytoplasmic cyclic dinucleotide (CDN) second messengers such as cyclic GMP-AMP (cGAMP). Upon its generation via cyclic GMP-AMP synthase (cGAS) by a wide array of pathogens that provide extracellular microbial DNA and by intracellular (nuclear and mitochondrial) DNA, it binds directly to the STING protein resulting in the activation of the STING pathway. This activation by cytosolic DNA initiates a cascade of events, cGAS-STING-TBK1-IRF3 signaling, that induces type 1 IFN response, and eventually the signaling is terminated by degradation of pathway components and clearance of stimulatory DNA. Given its significant role as an adaptor for DNA sensors to pathogens and its involvement in immune sensing, tumor growth control, and control of autoinflammatory and autoimmune disorders, the STING pathway has become a very important drug target. Credible evidence suggests that the cGAS–cGAMP–STING pathway makes fundamental contributions to at least three major cancer therapies: radiation therapy, chemotherapy, and immunotherapy, and it thus represents a promising drug target. Therefore, there is a need to identify lead compounds that effectively modulate human STING for further drug development. Towards this goal, we have developed a bioluminescent assay to monitor the concentration of cGAMP in intracellular as well as extracellular compartments. The assay relies on the new concept of Protein Complementation Assay (PCA) using nanoluciferase (nanoluc) complementation technology where a small peptide (SmBiT) derived from nanoluc linked to cGAMP through a linker (cGAMP tracer) can be recognized by an anti cGAMP antibody that is linked to a nanoluc complementary fragment (LgBiT) resulting in bioluminescence upon the addition of nanoluc substrate. The presence of free cGAMP that is generated in the reaction competes with cGAMP tracer and decreases bioluminescence. We have optimized the assay for higher sensitivity down to less than 10 nM cGAMP and less than one ng of cGAS and thus, and it is suitable for testing compounds that modulate cGAS activity. We also improved cell lysis condition to increase recovery of cGAMP that is generated intracellularly using several cGAS activators and correlating its concentration with cytokine release. We envision using this assay to monitor cGAMP presence in sera and spinal fluids of patients who have ALS and Alzheimer diseases. The assay is homogenous, with minimal or no false hits using LOPAC screening and HTS formatted and can be completed in less than one hour. Thus, this assay provides valuable contribution for investigating modulators of the STING pathway and facilitates the search for novel therapeutics. Citation Format: Said A. Goueli, kevin Hsiao, Nate Murray, dareen Mikheil, Matt Larsen, Hui Wang. Monitoring cGAMP Biochemically and in cell using homogenous HTS formatted bioluminescent assay [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2024; Part 1 (Regular Abstracts); 2024 Apr 5-10; San Diego, CA. Philadelphia (PA): AACR; Cancer Res 2024;84(6_Suppl):Abstract nr 2057.

Improving Split Reporters of Protein-Protein Interactions through Orthology-Based Protein Engineering.

Protein-protein interactions (PPIs) can be detected through selective complementation of split fluorescent reporters made of two complementary fragments that reassemble into a functional fluorescent reporter when in close proximity. We previously introduced splitFAST, a chemogenetic PPI reporter with rapid and reversible complementation. Here, we present the engineering of splitFAST2, an improved reporter displaying higher brightness, lower self-complementation, and higher dynamic range for optimal monitoring of PPI using an original protein engineering strategy that exploits proteins with orthology relationships. Our study allowed the identification of a system with improved properties and enabled a better understanding of the molecular features controlling the complementation properties. Because of the rapidity and reversibility of its complementation, its low self-complementation, high dynamic range, and improved brightness, splitFAST2 is well suited to study PPI with high spatial and temporal resolution, opening great prospects to decipher the role of PPI in various biological contexts.

CRISPR-Cas9-Mediated Bioluminescent Tagging of Endogenous Proteins by Fluorescent Protein-Assisted Cell Sorting.

Oncogenic fusion genes are attractive therapeutic targets because of their tumor-specific expression and central "driver" roles in various human cancers. However, oncogenic fusions involving transcription factors such as PAX3-FOXO1 in alveolar fusion gene-positive rhabdomyosarcoma (FP-RMS) have been difficult to inhibit due to the apparent lack of tractable drug-like binding sites comparable to that recognized by Gleevec (imatinib mesylate) on the BCR-ABL1 tyrosine kinase fusion protein. Toward the identification of novel small molecules that selectively target PAX3-FOXO1, we used CRISPR-Cas9-mediated knock-in to append the pro-luminescent HiBiT tag onto the carboxy terminus of the endogenous PAX3-FOXO1 fusion protein in two human FP-RMS cell lines (RH4 and SCMC). HiBiT is an 11-amino acid peptide derived from the NanoLuc luciferase that produces a luminescence signal which is ~100-fold brighter than firefly or Renilla luciferases through high-affinity binding to a complementary NanoLuc peptide fragment called LgBiT. To facilitate single-cell clonal isolation of knock-ins, the homology-directed repair template encoding HiBiT was followed by a P2A self-cleaving peptide for coexpression of an mCherry fluorescent protein as a fluorescence-activated cell sorter (FACS)-selectable marker. HiBiT tagging thus allows highly sensitive luminescence detection of endogenous PAX3-FOXO1 levels permitting quantitative high-throughput screening of large compound libraries for the discovery of PAX3-FOXO1 inhibitors and degraders.

Unveiling the intricacy of gapmer oligonucleotides through advanced tandem mass spectrometry approaches and scan accumulation for 2DMS.

Antisense oligonucleotides (ASOs) are crucial for biological applications as they bind to complementary RNA sequences, modulating protein expression. ASOs undergo synthetic modifications like phosphorothioate (PS) backbone and locked nucleic acid (LNA) to enhance stability and specificity. Tandem mass spectrometry (MS) techniques were employed to study gapmer ASOs, which feature a DNA chain within RNA segments at both termini, revealing enhanced cleavages with ultraviolet photodissociation (UVPD) and complementary fragment ions from collision-induced dissociation (CID) and electron detachment dissociation (EDD). 2DMS, a data-independent analysis technique, allowed for comprehensive coverage and identification of shared fragments across multiple precursor ions. EDD fragmentation efficiency correlated with precursor ion charge states, with higher charges facilitating dissociation due to intramolecular repulsions. An electron energy of 22.8 eV enabled electron capture and radical-based cleavage. Accumulating multiple scans and generating average spectra improved signal intensity, aided by denoising algorithms. Data analysis utilised a custom Python script capable of handling modifications and generating unique mass lists.

Differentiation of isobaric cross-linked peptides prepared via maleimide chemistry using MALDI-MS and MS/MS.

The thiosuccinimide linker is widely used in the synthesis of bioconjugates. However, it is susceptible to hydrolysis and is transformed into its hydrolyzed and/or the isobaric thiazine forms, the latter of which is a fairly common product in a conjugate that contains a cysteinyl peptide. Matrix-assisted laser desorption/ionization-mass spectrometry (MALDI-MS) and matrix-assisted laser desorption/ionization-tandem mass spectrometry (MALDI-MS/MS) are useful for differentiating these isobaric species. Four cross-linked peptides with thiosuccinimide linkers were synthesized. Analogs with linkers that were transformed into thiazine and/or the hydrolyzed thiosuccinimide linkers were then synthesized by incubating the samples at neutral or basic pH. All the cross-linked peptides were purified using RP-HPLC (reversed-phase high-performance liquid chromatography) and differentiated using MALDI-MS, MALDI-MS/MS, and ultraviolet photodissociation. A cysteinyl peptide-containing conjugate, the thiosuccinimide form, was largely transformed into the hydrolyzed or thiazine forms after incubation at neutral or basic pH. MALDI-MS allowed the three forms to be differentiated: the thiosuccinimide and its hydrolysis product yielded two constituent peptides after reductive cleavage between the Cys and succinimide moieties; no fragment ions were produced from the thiazine form. In addition, MALDI-MS/MS of the thiosuccinimide form yielded two pairs of complementary fragment ions via 1,4-elimination: Cys-SH and maleimide, and dehydro-alanine and thiosuccinimide, which are different from those produced via reductive cleavage in MALDI-MS. The thiazine form yielded fragment ions resulting from the cleavage of the newly formed amide bond in the linker that resulted from thiazine formation. The thiosuccinimide (but not thiazine) form of the cross-linked peptide yielded individual constituent peptides using MALDI-MS and MALDI-MS/MS, showing specific 1,4-elimination for the thiosuccinimide form and cleavage at the newly formed peptide bond via transcyclization for the thiazine form.

Quantum Chemical Analysis of Molecular and Fragment Ions Produced by Field Ionization of Methyl Stearate.

The formation of molecular and fragment ions observed in the field ionization mass spectrum of methyl stearate has been analyzed on the basis of quantum chemical calculations including time-dependent density functional theory (TDDFT) and natural bond orbital (NBO) analysis. The TDDFT calculations suggest that methyl stearate is ionized via two processes, namely a 7.43 eV excitation and a tunneling effect, while the high electric field of 1010 V/m enables analyte molecules to ionize at an effective 6 eV lower than the 9.26 eV ionization energy. The NBO analysis suggests that the abundances of aliphatic fragment ions [CnH2n+1]+ at m/z 29, 43, and 57 generated in the ionizing cell can be rationalized by hyperconjugation between the sigma (σ)-electrons of sp3 C-H bonds of methyl or methylene groups and the empty p-orbital of the carbocation -CH2+. The C4 periodic methyl ester fragment ions at m/z 115-269 and the complementary McLafferty rearrangement fragment ion at m/z 224 can be explained by metastable ion decay with rearrangement reactions in the ion source.

Ultraviolet photodissociation and collision-induced dissociation for qualitative/quantitative analysis of low molecular weight compounds by liquid chromatography-mass spectrometry

Collision-induced dissociation (CID) is the most wildly used fragmentation technique for qualitative and quantitative determination of low molecular weight compounds (LMWC). Ultraviolet photodissociation (UVPD) has been mainly investigated for the analysis of peptides and lipids while only in a limited way for LMWC. A triple quadrupole linear ion trap instrument has been modified to allow ultraviolet photodissociation (UVPD) in the end of the q2 region enabling various workflows with and without data-dependent acquisition (DDA) combining CID and UVPD in the same LC–MS analysis. The performance of UVPD, with a 266-nm laser, is compared to CID for a mix of 90 molecules from different classes of LMWC including peptides, pesticides, pharmaceuticals, metabolites, and drugs of abuse. These two activation methods offer complementary fragments as well as common fragments with similar sensitivities for most analytes investigated. The versatility of UVPD and CID is also demonstrated for quantitative analysis in human plasma of bosentan and its desmethyl metabolite, used as model analytes. Different background signals are observed for both fragmentation methods as well as unique fragments which opens the possibility of developing a selective quantitative assay with improved sample throughput, in particular for analytes present in different matrices.Graphical

Fragmentation of Technology Ownership and Acquisition Strategy of Firms

AbstractThis paper examines how the fragmented ownership of complementary intellectual property (IP) rights affects firms’ acquisition behaviour. We theorize that as the ownership of complementary IP rights fragments, the rate at which a focal firm engages in technology acquisitions will increase. Our predictions suggest that firms will expand their IP portfolios through acquisitions as a strategy to continue innovating when the ownership over strategic IP becomes exceedingly spread among technology holders. Furthermore, we propose that this positive relationship between fragmentation and acquisitions will be stronger for firms whose patent portfolios hold relatively less value compared to their peers, owing primarily to their diminished control over strategic IP. Using a unique longitudinal dataset from the biopharmaceutical industry, we find empirical support for our hypotheses.

An effective strategy of designing “turn on” mode-based lateral flow chromatography for rapid detection of aflatoxin B1

Aflatoxin B1 (AFB1) is an extremely toxic food contaminant that has serious effects on human health. In published aptamer-based lateral flow chromatography test strips, the detection results are mostly inversely proportional to the concentration of AFB1, which is a serious violation of intuition. An aptamer sensor based on the “turn on” mode for AFB1 detection has been reported in this paper. In this paper, we use gold nanoparticles (AuNPs) to present colorimetric signals and link capture sequences (SH-poly A-cDNA) to design AuNPs@SH-poly A-cDNA nanoprobes. The test strip relies on AFB1 and AuNPs@SH-poly A-cDNA competing aptamers for rapid detection of AFB1. In the absence of AFB1, the aptamer binds to AuNPs@SH-poly A-cDNA, preventing the cDNA from binding to the complementary fragment of the test line (DNAT), resulting in the disappearance of the red signal. However, in the presence of AFB1, the aptamer binds to AFB1, allowing some AuNPs@SH-poly A-cDNA not bound to the aptamer to be captured by DNAT, leading to the generation of a red signal. Regardless of the presence or absence of AFB1, the poly-A fragment of AuNPs@SH-poly A-cDNA consistently binds to the complementary sequence of the control line (DNAC) and presents a red signal. The detection results are proportional to the concentration of AFB1, which is in line with human intuitions. The development of this test strip provides a novel design idea for the detection of small molecules such as mycotoxins.

Intra-FCY1: a novel system to identify mutations that cause protein misfolding.

Protein misfolding is a common intracellular occurrence. Most mutations to coding sequences increase the propensity of the encoded protein to misfold. These misfolded molecules can have devastating effects on cells. Despite the importance of protein misfolding in human disease and protein evolution, there are fundamental questions that remain unanswered, such as, which mutations cause the most misfolding? These questions are difficult to answer partially because we lack high-throughput methods to compare the destabilizing effects of different mutations. Commonly used systems to assess the stability of mutant proteins in vivo often rely upon essential proteins as sensors, but misfolded proteins can disrupt the function of the essential protein enough to kill the cell. This makes it difficult to identify and compare mutations that cause protein misfolding using these systems. Here, we present a novel in vivo system named Intra-FCY1 that we use to identify mutations that cause misfolding of a model protein [yellow fluorescent protein (YFP)] in Saccharomyces cerevisiae. The Intra-FCY1 system utilizes two complementary fragments of the yeast cytosine deaminase Fcy1, a toxic protein, into which YFP is inserted. When YFP folds, the Fcy1 fragments associate together to reconstitute their function, conferring toxicity in media containing 5-fluorocytosine and hindering growth. But mutations that make YFP misfold abrogate Fcy1 toxicity, thus strains possessing misfolded YFP variants rise to high frequency in growth competition experiments. This makes such strains easier to study. The Intra-FCY1 system cancels localization of the protein of interest, thus can be applied to study the relative stability of mutant versions of diverse cellular proteins. Here, we confirm this method can identify novel mutations that cause misfolding, highlighting the potential for Intra-FCY1 to illuminate the relationship between protein sequence and stability.

Probing expression of E-selectin using CRISPR-Cas9-mediated tagging with HiBiT in human endothelial cells

E-selectin is expressed on endothelial cells in response to inflammatory cytokines and mediates leukocyte rolling and extravasation. However, studies have been hampered by lack of experimental approaches to monitor expression in real time in living cells. Here, NanoLuc Binary Technology (NanoBiT) in conjunction with CRISPR-Cas9 genome editing was used to tag endogenous E-selectin in human umbilical vein endothelial cells (HUVECs) with the 11 amino acid nanoluciferase fragment HiBiT. Addition of the membrane-impermeable complementary fragment LgBiT allowed detection of cell surface expression. This allowed the effect of inflammatory mediators on E-selectin expression to be monitored in real time in living endothelial cells. NanoBiT combined with CRISPR-Cas9 gene editing allows sensitive monitoring of real-time changes in cell surface expression of E-selectin and offers a powerful tool for future drug discovery efforts aimed at this important inflammatory protein.

Synthetic Receptor Based on a Peptide Antibiotic-Functionalized Chimera for Hybridization-Based Polynucleotide Detection.

Nanopores offer highly sensitive, low-cost, and single-molecule sensing capabilities, and the societal impact of this approach is best captured by the advent of nanopore-based DNA detection and sequencing technologies, which extract genomic information without amplification. To address a critical difficulty plaguing such undertakings involving especially protein-based nanopores isolated in lipid bilayers, namely, the formation of a stable, long-lasting single nanopore, we pioneer herein an approach for generating functional nanostructures enabling small single-stranded DNA (ssDNA) detection. We designed a dynamic hybrid construct by appending extramembrane peptide nucleic acid (PNA) segments to the C-terminus of modified ion channel-forming alamethicin monomers. We found that the resulting chimeric molecules successfully coassemble in a voltage-dependent manner in planar lipid membranes generating diameter-variable oligomers. The subsequent interaction at the flexible extramembrane segment of such formed dynamic nanopores with aqueously added complementary ssDNA fragments leads to overall conformational alterations affecting the peptide assembly state kinetics and mediated ionic current. Such recognition events were found specific to the primary structure of target ssDNA and uninhibited the presence of serum. Our platform demonstrates the feasibility of designing an entirely new class of versatile chimeric biosensors, for which, dependent upon the nature of the attached receptor moiety and underlying recognition chemistry, the applicability area may extend to other analytes.

In Situ DNA Detection Using a Phase-Demodulated High-Order Intermodal Interferometer Based on an Exposed-Core Microstructure Fiber

In this paper, we demonstrate a phase-demodulated high-order intermodal interference based on exposed-core microstructure fiber (ECF), and it is applied for low concentration in-situ deafness gene DNA detection. The simulation results show that the phase sensitivity of the high-order interference mode (LP <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">01</sub> -LP <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">21a</sub> ) is about 6 times higher than that of the low-order (LP <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">01</sub> -LP <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">11b</sub> ), which is different from the traditional wavelength coded demodulation method. Hybridization experiments of complementary and non-complementary deafness gene DNA fragments were carried out, and the sensing system was obtained to screen for complementary gene fragments. DNA complementary fragments with concentrations as low as 1 nM can be detected with a corresponding phase variation of 7.32 °. The limit of detection is as low as 0.089 nM. The experiment and theoretical analysis prove that this fiber optic biosensor can obtain high sensitivity and signal-to-noise ratio with phase-demodulation high-order intermodal interference scheme, which provides an alternative for the subsequent studies of high sensitivity and high precision sensors.