Preparation Of Competent Cells Research Articles

Role of cspA on the Preparation of Escherichia coliCompetent Cells by Calcium Chloride Method.

One of the fundamental techniques in genetic engineering is the creation of Escherichia colicompetent cells using the CaCl2 method. However, little is known about the mechanism of E. coli competence formation. We have previously found that the cspA gene may play an indispensable role in the preparation of E. coli DH5αcompetent cells through multiomics analysis. In the present study, the cellular localization, physicochemical properties, and function of the protein expressed by the cspA gene were analyzed. To investigate the role of the cspA gene in E. coli transformation, cspA-deficient mutant was constructed by red homologous recombination. The growth, transformation efficiency, and cell morphology of the cspA-deficient strain and E. coli were compared. It was found that there were no noticeable differences in growth and morphology between E. coli and the cspA-deficient strain cultured at 37°C, but the mutant exhibited increased transformation efficiencies compared to E. coli DH5α for plasmids pUC19, pET-32a, and p1304, with enhancements of 2.23, 2.24,and 3.46 times, respectively. It was proved that cspA gene is an important negative regulatory gene in the CaCl2 preparation of competent cells.

Multiplex Marker-Less Genome Integration in Pichia pastoris Using CRISPR/Cas9.

Pichia pastoris is known for its excellent protein expression ability. As an industrial methyl nutritional yeast, it can effectively utilize methanol as the sole carbon source, serving as a potential platform for C1 biotransformation. Unfortunately, the lack of synthetic biology tools in P. pastoris limits its broad applications, particularly when multigene pathways should be manipulated. Here, the CRISPR/Cas9 system is established to efficiently integrate multiple heterologous genes to construct P. pastoris cell factories. In this protocol, with the 2,3-butanediol (BDO) biosynthetic pathway as a representative example, the procedures to construct P. pastoris cell factories are detailed using the established CRISPR-based multiplex genome integration toolkit, including donor plasmid construction, competent cell preparation and transformation, and transformant verification. The application of the CRISPR toolkit is demonstrated by the construction of engineered P. pastoris for converting methanol to BDO. This lays the foundation for the construction of P. pastoris cell factories harboring multi-gene biosynthetic pathways for the production of high-value compounds.

Agrobacterial Transformation Enhancement by Improved Competent Cell Preparation and Optimized Electroporation.

The introduction of plasmids into Agrobacterium cells is one of the key steps in the Agrobacterium-mediated transformation of plants for gene editing applications. Depending on chromosomal background, some Agrobacterium strains exhibit a very low transformation efficiency, which results in a low number of colonies for subsequent screening and thus limits the potential for automated high-throughput transformation processes, especially with low copy or large plasmids. This study demonstrates improvements of transformation frequency by modifying the competent cell preparation process and optimizing electroporation parameters for two Agrobacterium strains. The competent cell preparation process was modified by prolonging bacterial growth in the log phase and optimizing the endpoint cell density for cell harvest which resulted in a significant cell yield increase and transformation frequency improvement. Optimization of electroporation by fine-tuning the parameters not only resulted in a 30-fold transformation frequency increase but also revealed a strain-dependent requirement for field strength and electric pulse length. To further improve transformation of a recalcitrant strain, different concentrations of dimethyl sulfoxide (DMSO) in recovery medium were examined. The study revealed an important role of DMSO in transformed cell recovery, with 5% DMSO resulting in the highest transformation frequency. The significant improvements in Agrobacterium transformation frequency addressed a critical bottleneck towards establishing a high throughput process.

Bioinformatics analysis of gene bhsA and its role in Ca2+ -treated Escherichia coli.

One of the commonly employed methods in molecular biology is to utilize calcium chloride to treat Escherichia coli for the preparation of competent cells to facilitate foreign gene expression. However, the molecular mechanisms underlying Ca2+ mediation of competent cell formation and identification of the key genes involved in the process remain unclear. In previous studies, the combined analysis of transcriptomics and proteomics revealed bhsA as one of the crucial genes. The gene ontology functional annotation of bhsA identified it as a member of the YhcN family encoding an outer membrane protein that confers resistance to various stresses. The IPR0108542 domain found within the protein plays a significant role in stress response and biofilm formation in E. coli. Analysis of the STRING database showed that the proteins interacting with bhsA are primarily involved in biofilm formation and stress resistance. Using the RED homologous recombination method, a bhsA deletion strain was constructed to verify its role in E. coli genetic transformation. Although the mutant strain showed no significant differences in morphology or growth trend when compared to the wild-type strain, its transformation efficiency decreased by 1.14- and 1.64-fold with plasmids pUC19 and pET-32a. Furthermore, the 1-N-phenylnaphthylamine assay indicated a 1.71-fold reduction in cell membrane permeability in the mutant strain.

Electrotransformation of Foodborne Pathogen Cronobacter sakazakii by a Simple Method.

Cronobacter sakazakii is an opportunistic foodborne pathogen that mainly infects infants and immunocompromised people, with a high mortality rate. However, the efficient transformation method of this bacterium has not been systematically reported. In this study, we developed a fast and efficient transformation method for C. sakazakii by cold sucrose treatment. Compared with CaCl2 or glycerol treatment, the transformation efficiency of this method is significantly high when bacteria were cultured overnight at 42°C before cold sucrose treatment. Furthermore, applying this method, we successfully knocked out the pppA gene by direct electroporation. Collectively, our study provides a simple, time-saving, and efficient method for competent cell preparation of C. sakazakii, which is conducive to the further research of C. sakazakii.

Transforming the untransformable with knockout minicircles: High-efficiency transformation and vector-free allelic exchange knockout in the fish pathogen Photobacterium damselae.

Gene inactivation studies are critical in pathogenic bacteria, where insights into species biology can guide the development of vaccines and treatments. Allelic exchange via homologous recombination is a generic method of targeted gene editing in bacteria. However, generally applicable protocols are lacking, and suboptimal approaches are often used for nonstandard but epidemiologically important species. Photobacterium damselae subsp. piscicida (Pdp) is a primary pathogen of fish in aquaculture and has been considered hard to transform since the mid-1990s. Consequently, conjugative transfer of RK2/RP4 suicide vectors from Escherichiacoli S17-1/SM10 donor strains, a system prone to off-target mutagenesis, was used to deliver the allelic exchange DNA in previous studies. Here we have achieved efficient electrotransformation in Pdp using a salt-free highly concentrated sucrose solution, which performs as a hypertonic wash buffer, cryoprotectant, and electroporation buffer. High-efficiency transformation has enabled vector-free mutagenesis for which we have employed circular minimalistic constructs (knockout minicircles) containing only allelic exchange essentials that were generated by Gibson assembly. Preparation of competent cells using sucrose and electroporation/integration of minicircles had virtually no detectable off-target promutagenic effect. In contrast, a downstream sacB selection apparently induced several large deletions via mobilization of transposable elements. Electroporation of minicircles into sucrose-treated cells is a versatile broadly applicable approach that may facilitate allelic exchange in a wide range of microbial species. The method permitted inactivation of a primary virulence factor unique to Pdp, apoptogenic toxin AIP56, demonstrating the efficacy of minicircles for difficult KO targets located on the high copy number of small plasmids.

Rapid method for plasmid DNA recombination (Murakami-system)

DNA recombination is a useful technology for cloning and subsequent functional analysis, while standard techniques for plasmid DNA recombination have remained unchanged. In the present study, we introduced rapid method for plasmid DNA recombination, which we named “Murakami-system”, to complete the experiments in under 33 h. For this purpose, we selected the following: PCR amplification with 25 cycles and E. coli strain with rapid growth (incubation time of 6–8 h). In addition, we selected rapid plasmid DNA purification (mini-prep; ∼10 min) and rapid restriction enzyme incubation (20 min). This recombination system enabled rapid plasmid DNA recombination within 24–33 h, which could be useful in various fields. We also established a 1-day method for competent cell preparation. Our rapid recombination system allowed several sessions of plasmid DNA recombination to be performed every week, which improves the functional analysis of various genes.•“Rapid method for plasmid DNA recombination (Murakami-system).•E. coli strain with rapid growth (incubation time of 6–8 h).•Combination of rapid protocols (PCR, electrophoresis, DNA purification, ligation, and mini-prep) enabled plasmid DNA recombination within 24–33 h.

An Optimized Transformation Protocol for Escherichia coli BW3KD with Supreme DNA Assembly Efficiency.

DNA cloning requires two steps: the assembly of recombinant DNA molecules and the transformation of the product into a host organism for replication. High efficiencies in both processes can increase the success rate. Recently, we developed an Escherichia coli BW3KD strain with higher transformation efficiency than commonly used cloning strains. Here, we further developed a simple method named TSS-HI (transformation storage solution optimized by Hannahan and Inoue method) for competent cell preparation, which combined the advantages of three common methods for operational simplicity and high transformation efficiency. When competent BW3KD cells were prepared using this developed method, the transformation efficiency reached up to (7.21 ± 1.85) × 109 CFU/μg DNA, which exceeded the levels of commercial chemically competent cells and homemade electrocompetent cells. BW3KD cells formed colonies within 7 h on lysogeny broth agar plates, quicker than the well-known fast-growing E. coli cloning strain Mach1. The competent cells worked effectively for the transformation of assembled DNA of 1 to 7 fragments in one step and promoted efficiencies of transformation or cloning with large plasmids. The cloning efficiency of BW3KD cells prepared by this method increased up to 828-fold over that of E. coli XL1-Blue MRF' cells prepared by a common method. Thus, competent cells are suitable for different cloning jobs and should help with the increased demand for DNA assembly in biological studies and biotechnology. IMPORTANCE DNA transformation is commonly used in cloning; however, high transformation efficiency becomes a limiting factor in many applications, such as the construction of CRISPR and DNA libraries, the assembly of multiple fragments, and the transformation of large plasmids. We developed a new competent cell preparation method with unmatched transformation efficiency. When the BW3KD strain, derived from Escherichia coli BW25113 cells, was prepared by this method, its transformation efficiency reached up to (7.21 ± 1.85) × 109 CFU/μg DNA, which broke the record for chemically prepared competent cells. Routine cloning could be completed in 1 day due to the high growth rate of this strain. The competent cells were shown to be highly efficient for transformation or cloning with large plasmids and for the assembly of multiple fragments. The results highlight the effectiveness of the new protocol and the usefulness of the BW3KD strain as the host.

CRISPR/Cas9-Mediated Genome Editing for Pseudomonas fulva, a Novel Pseudomonas Species with Clinical, Animal, and Plant-Associated Isolates.

As one of the most widespread groups of Gram–negative bacteria, Pseudomonas bacteria are prevalent in almost all natural environments, where they have developed intimate associations with plants and animals. Pseudomonas fulva is a novel species of Pseudomonas with clinical, animal, and plant–associated isolates, closely related to human and animal health, plant growth, and bioremediation. Although genetic manipulations have been proven as powerful tools for understanding bacterial biological and biochemical characteristics and the evolutionary origins, native isolates are often difficult to genetically manipulate, thereby making it a time–consuming and laborious endeavor. Here, by using the CRISPR–Cas system, a versatile gene–editing tool with a two–plasmid strategy was developed for a native P. fulva strain isolated from the model organism silkworm (Bombyx mori) gut. We harmonized and detailed the experimental setup and clarified the optimal conditions for bacteria transformation, competent cell preparation, and higher editing efficiency. Furthermore, we provided some case studies, testing and validating this approach. An antibiotic–related gene, oqxB, was knocked out, resulting in the slow growth of the P. fulva deletion mutant in LB containing chloramphenicol. Fusion constructs with knocked–in gfp exhibited intense fluorescence. Altogether, the successful construction and application of new genetic editing approaches gave us more powerful tools to investigate the functionalities of the novel Pseudomonas species.

A Simple Quantitative Assay for Measuring β‐Galactosidase Activity Using X‐Gal in Yeast‐Based Interaction Analyses

Yeast-based interaction assays to determine protein-protein and protein-nucleic acid interactions commonly rely on the reconstitution of chimeric transcription factors that activate the expression of target reporter genes. The enzyme β-galactosidase (β-gal), coded by the LacZ gene of Escherichia coli, is a widely used reporter in yeast systems, and its expression is commonly assessed by evaluating its activity. X-gal (5-bromo-4-chloro-3-indolyl-β-d-galactopyranoside) is an inexpensive and sensitive substrate of β-gal, whose hydrolysis results in an intensely blue colored and easily detectable end product, 5,5'-dibromo-4,4'-dichloro-indigo. The insoluble nature of this end product, however, makes X-gal-based assays unsuitable for direct spectrophotometric absorbance quantification. As such, the use of X-gal is mostly restricted to solid-support approaches, such as colony lift or agar plate assays, which often only provide a qualitative readout. In this article, we describe a quantitative solid-phase X-gal assay to measure protein-protein interaction strength in yeast cells using a simple and low-cost experimental setup. We have optimized multiple aspects of the assay, namely sample preparation, reaction time, and quantification method, for speed and consistency. By integrating the use of a freely available ImageJ-based plugin, we have further standardized the assay for reliability and reproducibility. This improved quantitative X-gal assay can be performed in a standard molecular biology lab without the need for any specialized equipment other than an inexpensive and widely accessible smartphone camera. To exemplify the protocol, we provide detailed step-by-step instructions to perform a quantitative X-gal assay to assess the interaction between two Arabidopsis thaliana proteins, SUPPRESSOR OF PHYA-105 1 (SPA1) and PRODUCTION OF ANTHOCYANIN PIGMENT 2 (PAP2). To demonstrate the sensitivity of our assay in detecting weaker interactions, we also compare the results with a liquid-phase assay that uses ONPG (ortho-nitrophenyl-β-galactopyranoside) as a substrate for β-gal. The quantitative X-gal assay described here can easily be adapted for high-throughout interaction studies and protein domain mapping, even in yeast strains with low levels of LacZ expression. © 2022 The Authors. Current Protocols published by Wiley Periodicals LLC. Basic Protocol 1: Preparation of competent yeast cells and transformation Alternate Protocol 1: In-house preparation of yeast competent cells for use in lithium acetate (LiAc)-mediated yeast transformation Support Protocol: Long-term storage and revival of frozen yeast strain stocks Basic Protocol 2: Measuring β-galactosidase activity via the quantitative X-gal assay Alternate Protocol 2: Quantification of interaction strength using liquid ONPG assay.

Citric acid/\u03b2-alanine carbon dots as a novel tool for delivery of plasmid DNA into E. coli cells

Successful delivery of plasmid DNA into the microbial cells is fundamental in recombinant DNA technology. Natural bacterial transformation is limited to only certain species due in part to the repulsive forces between negatively charged DNA and bacterial membranes. Most common method of DNA delivery into bacteria is artificial transformation through heat shock and electroporation. These methods require sophisticated instruments and tedious steps in preparation of competent cells. Transformation by conjugation is also not applicable to all plasmids. Nanoparticles have been used successfully in therapeutics for drug delivery into animal cells. They are starting to gain popularity in plant sciences as novel DNA nano carriers. Despite their promise as tool for DNA delivery, their use in microbial cell transformation has not been reported yet. Here we report the synthesis of carbon dots (CDs) from citric acid and β-alanine and their use in DNA delivery into E. coli cells. CDs were fabricated using microwave assisted synthesis. Plasmids carrying RFP reporter and ampicillin resistance genes were transferred to bacterial cells and further confirmed using polymerase chain reaction. Our findings indicate that CDs can be used successfully for delivery of foreign DNA of up to 10 kb into E. coli. We have demonstrated the use of β-alanine/citric acid carbon dots as nanocarriers of DNA into E. coli cells and identified their limitation in terms of the size of plasmid DNA they could carry. Use of these carbon dots is a novel method in foreign DNA delivery into bacterial cells and have a potential for the transformation of resistant organism for which there is still no reliable DNA delivery systems.

Exploration of an Efficient Electroporation System for Heterologous Gene Expression in the Genome of Methanotroph

One-carbon (C1) substrates such as methane and methanol have been considered as the next-generation carbon source in industrial biotechnology with the characteristics of low cost, availability, and bioconvertibility. Recently, methanotrophic bacteria naturally capable of converting C1 substrates have drawn attractive attention for their promising applications in C1-based biomanufacturing for the production of chemicals or fuels. Although genetic tools have been explored for metabolically engineered methanotroph construction, there is still a lack of efficient methods for heterologous gene expression in methanotrophs. Here, a rapid and efficient electroporation method with a high transformation efficiency was developed for a robust methanotroph of Methylomicrobium buryatense 5GB1. Based on the homologous recombination and high transformation efficiency, gene deletion and heterologous gene expression can be simultaneously achieved by direct electroporation of PCR-generated linear DNA fragments. In this study, the influence of several key parameters (competent cell preparation, electroporation condition, recovery time, and antibiotic concentration) on the transformation efficiency was investigated for optimum conditions. The maximum electroporation efficiency of 719 ± 22.5 CFU/μg DNA was reached, which presents a 10-fold improvement. By employing this method, an engineered M. buryatense 5GB1 was constructed to biosynthesize isobutyraldehyde by replacing an endogenous fadE gene in the genome with a heterologous kivd gene. This study provides a potential and efficient strategy and method to facilitate the cell factory construction of methanotrophs.

The optimization system for preparation of TG1 competent cells and electrotransformation.

An efficient electrotransformation system that includes electrocompetent cells is a critical component for the success of large‐scale gene transduction and replication. The conditions of TG1 competent cell preparation and optimal electrotransformation were evaluated by investigating different parameters. Certain parameters for preparation of TG1 competent cells (≥8 × 1010 colony forming units (cfu)/μg DNA) include optimum culture time of monoclonal bacteria (8–10 hr), amplification growth concentration (approximately OD600 = 0.45), and culture volume (400 ml in 2 L conical flask). With increased storage of competent cells at −80°C, electrotransformation efficiency gradually decreased, but it remains greater than ≥ 1010 cfu/μg DNA 3 months later. Moreover, the recovery time of electrotransformation also influenced electrotransformation efficiency (1.5–2 hr for optimization). The optimized transformation efficiency of TG1 (≥8 × 1010 cfu/μg DNA) was observed under suitable electric voltage (2.5 kV), electric intensity (15 kV/cm), and electric time (3.5 ms) of electricity for plasmid transformation. Optimized DNA amount (0.01–100 ng) dissolved in water led to the high efficiency of plasmid transformation (≥8 × 1010 cfu/μg DNA), but had low efficiency when dissolved in T4 ligation buffer (≤3 × 1010 cfu/μg DNA). These results indicated that an optimized TG1 transformation system is useful for high electrotransformation efficiency under general laboratory conditions. The optimized TG1 transformation system might facilitate large‐scale gene transduction for phage display library construction.

Biotechnological applications of the sepiolite interactions with bacteria: Bacterial transformation and DNA extraction

Among the various clay minerals, sepiolite, which is a natural nanofibrous silicate that exhibit a poor cell toxicity, is a potential promising nanocarrier for the non-viral and stable transfer of plasmid DNA into bacteria, mammalian and human cells. We first show here that sepiolite binds to bacteria, which can be useful in decontamination protocols. In a previous research we have shown that is possible to modulate the efficiency of the absorption of different types of DNA molecules onto sepiolite, and that the DNA previously adsorbed could be recovered preserving the DNA structure and biological activity. Taking advantage of both, the sepiolite/bacteria and sepiolite/DNA interactions, we show that pre-assembly of DNA with sepiolite and incubation of bacteria with this obtained biohybrid strongly improve the transformation efficiency, in a rapid, convenient and inexpensive method that doesn't require competent cell preparation. In addition, we also show that the controlled sepiolite and DNA binding capacities can be used to purify plasmids from bacteria, representing an advantageous alternative to onerous commercial kits. All of these results open the way to the use of sepiolite-based bionanohybrids for the development of novel biological models of interest for academic and applied sciences.

Free fatty acids promote transformation efficiency of yeast.

High transformation efficiency is essential in genetic engineering for functional metabolic analysis and cell factory construction, in particular in construction of long biosynthetic pathways with multiple genes. Here, we found that free fatty acid (FFA)-overproducing strain showed higher transformation efficiency in Saccharomyces cerevisiae. We then verified that external supplementation of FFAs, to the culture media for competent cell preparation, improved yeast transformation efficiency significantly. Among all tested FFAs, 0.5 g/L C16:0 FFA worked best on promoting transformation of S. cerevisiae and Komagataella phaffii (previously named as Pichia pastoris). Furthermore, C16:0 FFA improved the assembly efficiency of multiple DNA fragments into large plasmids and genome by 100%, which will facilitate the construction and optimization of multigene-containing long pathways.

Simplified protocol for faster transformation of (a large number of) Pichia pastoris strains.

During the last couple of decades, the methylotrophic yeast, Pichia pastoris, has emerged as an important yeast species owing to its increasing importance both in industry and in basic research. The presently available methods for P.pastoris transformation necessitate the preparation of competent cells, which requires lots of resource, space, time, and efforts. This limits the number of transformations that can be performed by an individual in a given time. This paper is reporting a modification in the available protocols, which makes P.pastoris transformation hassle-free. In the present, modified procedure, cells were grown in patches on YPD plate(s), and the rest of the steps were carried out in small Eppendorf tubes. This modified protocol does not require a big centrifuge and shaker. This modified procedure of P.pastoris transformation with its unique way of competent cells preparation will be helpful for those working with this yeast species.

Novel one step transformation method for Escherichia coli and Staphylococcus aureus using arginine-glucose functionalized hydroxyapatite nanoparticles

Bacterial gene transformation is one of the important techniques in molecular biology which has significant applications in gene cloning technology. In this study, we have developed arginine-glucose functionalized hydroxyapatite nanoparticle (R-G-HAp NPs) mediated novel one step transformation method, effective for both Gram-positive and Gram-negative bacteria. R-G-HAp NPs served as carriers to deliver pDNA into Escherichia coli and Staphylococcus aureus at room temperature, without the need for preparation of competent cells. High transformation efficiency was achieved in Gram-positive, S. aureus (107 cfu/μg of pDNA) as well as Gram-negative, E. coli (109 cfu/μg of pDNA). This demonstrates the efficacy of R-G-HAp NPs as a nano-vehicle to achieve high plasmid transformation efficiency, even in Gram-positive bacteria which is usually a challenge, exhibiting their potential as promising synthetic non-viral vectors for efficient bacterial gene transformation.

Automated Cell Treatment for Competence and Transformation of Escherichia coli in a High-Throughput Quasi-Turbidostat Using Microtiter Plates.

Metabolic engineering and genome editing strategies often lead to large strain libraries of a bacterial host. Nevertheless, the generation of competent cells is the basis for transformation and subsequent screening of these strains. While preparation of competent cells is a standard procedure in flask cultivations, parallelization becomes a challenging task when working with larger libraries and liquid handling stations as transformation efficiency depends on a distinct physiological state of the cells. We present a robust method for the preparation of competent cells and their transformation. The strength of the method is that all cells on the plate can be maintained at a high growth rate until all cultures have reached a defined cell density regardless of growth rate and lag phase variabilities. This allows sufficient transformation in automated high throughput facilities and solves important scheduling issues in wet-lab library screenings. We address the problem of different growth rates, lag phases, and initial cell densities inspired by the characteristics of continuous cultures. The method functions on a fully automated liquid handling platform including all steps from the inoculation of the liquid cultures to plating and incubation on agar plates. The key advantage of the developed method is that it enables cell harvest in 96 well plates at a predefined time by keeping fast growing cells in the exponential phase as in turbidostat cultivations. This is done by a periodic monitoring of cell growth and a controlled dilution specific for each well. With the described methodology, we were able to transform different strains in parallel. The transformants produced can be picked and used in further automated screening experiments. This method offers the possibility to transform any combination of strain- and plasmid library in an automated high-throughput system, overcoming an important bottleneck in the high-throughput screening and the overall chain of bioprocess development.

Generation of a Gene-disrupted Streptococcus mutans Strain Without Gene Cloning.

Typical methods for the elucidation of the function of a particular gene involve comparative phenotypic analyses of the wild-type strain and a strain in which the gene of interest has been disrupted. A gene-disruption DNA construct containing a suitable antibiotic resistance marker gene is useful for the generation of gene-disrupted strains in bacteria. However, conventional construction methods, which require gene cloning steps, involve complex and time-consuming protocols. Here, a relatively facile, rapid, and cost-effective method for targeted gene disruption in Streptococcus mutans is described. The method utilizes a 2-step fusion polymerase chain reaction (PCR) to generate the disruption construct and electroporation for genetic transformation. This method does not require an enzymatic reaction, other than PCR, and additionally offers greater flexibility in terms of the design of the disruption construct. Employment of electroporation facilitates the preparation of competent cells and improves the transformation efficiency. The present method may be adapted for the generation of gene-disrupted strains of various species.

Preparation and transformation optimization for supercompetent B. subtilis SCK6 cells

Bacillus subtilis is Gram-positive aerobic bacterium and widely used as a heterologous protein expression host because of its safety and high protein secretion property. However, comparing to Escherichia coli, the low transformation efficiency limits the application of B. subtilis as a host cell for directed evolution of heterologous enzymes. Therefore, we optimized the competent cell preparation conditions for conventional plasmid, including the alteration of the medium, the concentration of inducer, the plasmid type, and other parameters. Compared with the original LB medium, YN medium improved the transformation efficiency by about 4 folds. The transformation efficiency enhanced by about 2 folds under induction with 1.5% xylose for 2 h. In addition, with plasmids prepared from E. coli GM272 strain the transformation efficiency increased by about 3 folds. Combining all these findings, the transformation efficiency of pDG1730 plasmid under the optimized conditions could reach 10⁶ CFU/μg, which was 2 orders of magnitude higher than that the original. Our findings provide references for directed evolution of enzymes and metabolic engineering in Bacillus subtilis.