Common Spatial Pattern Algorithm Research Articles

High-wearable EEG-based distraction detection in motor rehabilitation

A method for EEG-based distraction detection during motor-rehabilitation tasks is proposed. A wireless cap guarantees very high wearability with dry electrodes and a low number of channels. Experimental validation is performed on a dataset from 17 volunteers. Different feature extractions from spatial, temporal, and frequency domain and classification strategies were evaluated. The performances of five supervised classifiers in discriminating between attention on pure movement and with distractors were compared. A k-Nearest Neighbors classifier achieved an accuracy of 92.8 ± 1.6%. In this last case, the feature extraction is based on a custom 12 pass-band Filter-Bank (FB) and the Common Spatial Pattern (CSP) algorithm. In particular, the mean Recall of classification (percentage of true positive in distraction detection) is higher than 92% and allows the therapist or an automated system to know when to stimulate the patient’s attention for enhancing the therapy effectiveness.

A neurophysiological approach to spatial filter selection for adaptive brain–computer interfaces

Objective. The common spatial patterns (CSP) algorithm is an effective method to extract discriminatory features from electroencephalography (EEG) to be used by a brain–computer interface (BCI). However, informed selection of CSP filters typically requires oversight from a BCI expert to accept or reject filters based on the neurophysiological plausibility of their activation patterns. Our goal was to identify, analyze and automatically classify prototypical CSP patterns to enhance the prediction of motor imagery states in a BCI. Approach. A data-driven approach that used four publicly available EEG datasets was adopted. Cluster analysis revealed recurring, visually similar CSP patterns and a convolutional neural network was developed to distinguish between established CSP pattern classes. Furthermore, adaptive spatial filtering schemes that utilize the categorization of CSP patterns were proposed and evaluated. Main results. Classes of common neurophysiologically probable and improbable CSP patterns were established. Analysis of the relationship between these categories of CSP patterns and classification performance revealed discarding neurophysiologically improbable filters can decrease decoder performance. Further analysis revealed that the spatial orientation of EEG modulations can evolve over time, and that the features extracted from the original CSP filters can become inseparable. Importantly, it was shown through a novel adaptive CSP technique that adaptation in response to these emerging patterns can restore feature separability. Significance. These findings highlight the importance of considering and reporting on spatial filter activation patterns in both online and offline studies. They also emphasize to researchers in the field the importance of spatial filter adaptation in BCI decoder design, particularly for online studies with a focus on training users to develop stable and suitable brain patterns.

Motor Imagery EEG Spectral-Spatial Feature Optimization Using Dual-Tree Complex Wavelet and Neighbourhood Component Analysis

BackgroundFrequency band optimization improves the performance of common spatial pattern (CSP) in motor imagery (MI) tasks classification because MI-related electroencephalograms (EEGs) are highly frequency specific. Many variants of CSP algorithm divided the EEG into various sub bands and then applied CSP. However, the feature dimension of MI-EEG data increases with addition of frequency sub bands and requires efficient feature selection algorithms. The performance of CSP also depends on filtering techniques. MethodIn this study, we designed a dual tree complex wavelet transform based filter bank to filter the EEG into sub bands, instead of traditional filtering methods, which improved the spatial feature extraction efficiency. Further, after filtering EEG into different sub bands, we extracted spatial features from each sub band using CSP and optimized them by a proposed supervised learning framework based on neighbourhood component analysis (NCA). Subsequently, a support vector machine (SVM) is trained to perform classification. ResultsAn experimental study, conducted on two datasets (BCI Competition IV (Dataset 2b), and BCI competition III (Dataset IIIa)), validated the MI classification effectiveness of the proposed method in comparison with standard algorithms such as CSP, Filter bank CSP (CSP), and Discriminative FBCSP (DFBCSP). The average classification accuracy obtained by the proposed method for BCI Competition IV (Dataset 2b), and BCI Competition III (Dataset IIIa) are 84.02 ± 12.2 and 89.1 ± 7.50, respectively and found significant than that achieved by standard methods. ConclusionAchieved superior results suggest that the proposed algorithm can improve the performance of MI-based Brain-computer interface devices.

Transfer Learning Based on Hybrid Riemannian and Euclidean Space Data Alignment and Subject Selection in Brain-Computer Interfaces

Transfer learning is a promising approach for reducing training time in a brain-computer interface (BCI). However, how to effectively transfer data from previous users to a new user poses a huge challenge. This paper presents a novel transfer learning approach that combines data alignment and source subject selection for motor imagery (MI) based BCIs. The former is achieved by a reference matrix from the regularization of the two reference matrices estimated in Riemannian and Euclidean space respectively, whereas the latter is implemented by a modified sequential forward floating-point search algorithm. The aligned training data from chosen source subjects are used for creating a classification model based on either spatial covariance matrices in Riemannian space or common spatial pattern algorithm in Euclidean space. The proposed algorithms were evaluated on two MI based BCI data sets with different subjects and compared with existing transfer learning algorithms with sole data alignment or subject selection. The experimental results show that the hybrid-space data alignment methods for reducing the differences among subjects significantly outperform two single-space alignment methods, and the source subject selection method can substantially enhance the similarity between source subjects and the target subject. The combination of the two methods achieves superior classification performance compared to either one. The proposed algorithms will greatly facilitate the real-world applications of MI based BCIs.

Learning Common Time-Frequency-Spatial Patterns for Motor Imagery Classification.

The common spatial patterns (CSP) algorithm is the most popular spatial filtering method applied to extract electroencephalogram (EEG) features for motor imagery (MI) based brain-computer interface (BCI) systems. The effectiveness of the CSP algorithm depends on optimal selection of the frequency band and time window from the EEG. Many algorithms have been designed to optimize frequency band selection for CSP, while few algorithms seek to optimize the time window. This study proposes a novel framework, termed common time-frequency-spatial patterns (CTFSP), to extract sparse CSP features from multi-band filtered EEG data in multiple time windows. Specifically, the whole MI period is first segmented into multiple subseries using a sliding time window approach. Then, sparse CSP features are extracted from multiple frequency bands in each time window. Finally, multiple support vector machine (SVM) classifiers with the Radial Basis Function (RBF) kernel are trained to identify the MI tasks and the voting result of these classifiers determines the final output of the BCI. This study applies the proposed CTFSP algorithm to three public EEG datasets (BCI competition III dataset IVa, BCI competition III dataset IIIa, and BCI competition IV dataset 1) to validate its effectiveness, compared against several other state-of-the-art methods. The experimental results demonstrate that the proposed algorithm is a promising candidate for improving the performance of MI-BCI systems.

Advanced TSGL-EEGNet for Motor Imagery EEG-Based Brain-Computer Interfaces

Deep learning technology is rapidly spreading in recent years and has been extensive attempts in the field of Brain-Computer Interface (BCI). Though the accuracy of Motor Imagery (MI) BCI systems based on the deep learning have been greatly improved compared with some traditional algorithms, it is still a big problem to clearly interpret the deep learning models. To address the issues, this work first introduces a popular deep learning model EEGNet and compares it with the traditional algorithm Filter-Bank Common Spatial Pattern (FBCSP). After that, this work considers that the 1-D convolution of EEGNet can be explained by a special Discrete Wavelet Transform (DWT), and the depthwise convolution of EEGNet is similar to the Common Spatial Pattern (CSP) algorithm. Therefore, this work improves the EEGNet by using the algorithm Temporary Constrained Sparse Group Lasso (TCSGL) to enhance its performance. The proposed model TSGL-EEGNet is tested on the BCI Competition IV 2a and BCI Competition III IIIa datasets that both are 4-classes classification MI tasks. The testing results show that the proposed model has achieved 78.96% (0.7194) average classification accuracy (kappa) on the dataset BCI Competition IV 2a, which are greater than EEGNet, C2CM, MB3DCNN, SS-MEMDBF and FBCSP, especially on insensitive subjects. The proposed model has also achieved 85.30% (0.8040) average classification accuracy (kappa) on the dataset BCI Competition III IIIa, which are greater than the EEGNet, MFTFS et al. At last, this work uses average-validation and stacking to further enhance the effect of the model. The 4-classes classification average accuracy rates reach 81.34% and 88.89%, and the kappas reach 0.7511 and 0.8519 on dataset BCI Competition IV 2a and BCI Competition III IIIa, respectively. Additionally, this work also uses the Grad-CAM to visualize the frequency and spatial features that are learned by the neural network.

A New Approach for Video Action Recognition: CSP-Based Filtering for Video to Image Transformation

In this paper we report on the design of a pipeline involving Common Spatial Patterns (CSP), a signal processing approach commonly used in the field of electroencephalography (EEG), matrix representation of features and image classification to categorize videos taken by a humanoid robot. The ultimate goal is to endow the robot with action recognition capabilities for a more natural social interaction. Summarizing, we apply the CSP algorithm to a set of signals obtained for each video by extracting skeleton joints of the person performing the action. From the transformed signals a summary image is obtained for each video, and these images are then classified using two different approaches; global visual descriptors and convolutional neural networks. The presented approach has been tested on two data sets that represent two scenarios with common characteristics. The first one is a data set with 46 individuals performing 6 different actions. In order to create the group of signals of each video, OpenPose has been used to extract the skeleton joints of the person performing the actions. The second data set is an Argentinian Sign Language data set (LSA64) from which the signs performed using just the right hand have been used. In this case the joint signals have been obtained using MediaPipe. The results obtained with the presented method have been compared with a Long Short-Term Memory (LSTM) method, achieving promising results.

A Multifrequency Brain Network-Based Deep Learning Framework for Motor Imagery Decoding.

Motor imagery (MI) is an important part of brain-computer interface (BCI) research, which could decode the subject's intention and help remodel the neural system of stroke patients. Therefore, accurate decoding of electroencephalography- (EEG-) based motion imagination has received a lot of attention, especially in the research of rehabilitation training. We propose a novel multifrequency brain network-based deep learning framework for motor imagery decoding. Firstly, a multifrequency brain network is constructed from the multichannel MI-related EEG signals, and each layer corresponds to a specific brain frequency band. The structure of the multifrequency brain network matches the activity profile of the brain properly, which combines the information of channel and multifrequency. The filter bank common spatial pattern (FBCSP) algorithm filters the MI-based EEG signals in the spatial domain to extract features. Further, a multilayer convolutional network model is designed to distinguish different MI tasks accurately, which allows extracting and exploiting the topology in the multifrequency brain network. We use the public BCI competition IV dataset 2a and the public BCI competition III dataset IIIa to evaluate our framework and get state-of-the-art results in the first dataset, i.e., the average accuracy is 83.83% and the value of kappa is 0.784 for the BCI competition IV dataset 2a, and the accuracy is 89.45% and the value of kappa is 0.859 for the BCI competition III dataset IIIa. All these results demonstrate that our framework can classify different MI tasks from multichannel EEG signals effectively and show great potential in the study of remodelling the neural system of stroke patients.

Multiclass Classification Based on Combined Motor Imageries.

Motor imagery (MI) allows the design of self-paced brain–computer interfaces (BCIs), which can potentially afford an intuitive and continuous interaction. However, the implementation of non-invasive MI-based BCIs with more than three commands is still a difficult task. First, the number of MIs for decoding different actions is limited by the constraint of maintaining an adequate spacing among the corresponding sources, since the electroencephalography (EEG) activity from near regions may add up. Second, EEG generates a rather noisy image of brain activity, which results in a poor classification performance. Here, we propose a solution to address the limitation of identifiable motor activities by using combined MIs (i.e., MIs involving 2 or more body parts at the same time). And we propose two new multilabel uses of the Common Spatial Pattern (CSP) algorithm to optimize the signal-to-noise ratio, namely MC2CMI and MC2SMI approaches. We recorded EEG signals from seven healthy subjects during an 8-class EEG experiment including the rest condition and all possible combinations using the left hand, right hand, and feet. The proposed multilabel approaches convert the original 8-class problem into a set of three binary problems to facilitate the use of the CSP algorithm. In the case of the MC2CMI method, each binary problem groups together in one class all the MIs engaging one of the three selected body parts, while the rest of MIs that do not engage the same body part are grouped together in the second class. In this way, for each binary problem, the CSP algorithm produces features to determine if the specific body part is engaged in the task or not. Finally, three sets of features are merged together to predict the user intention by applying an 8-class linear discriminant analysis. The MC2SMI method is quite similar, the only difference is that any of the combined MIs is considered during the training phase, which drastically accelerates the calibration time. For all subjects, both the MC2CMI and the MC2SMI approaches reached a higher accuracy than the classic pair-wise (PW) and one-vs.-all (OVA) methods. Our results show that, when brain activity is properly modulated, multilabel approaches represent a very interesting solution to increase the number of commands, and thus to provide a better interaction.

An Intelligent EEG Classification Methodology Based on Sparse Representation Enhanced Deep Learning Networks.

The classification of electroencephalogram (EEG) signals is of significant importance in brain–computer interface (BCI) systems. Aiming to achieve intelligent classification of EEG types with high accuracy, a classification methodology using sparse representation (SR) and fast compression residual convolutional neural networks (FCRes-CNNs) is proposed. In the proposed methodology, EEG waveforms of classes 1 and 2 are segmented into subsignals, and 140 experimental samples were achieved for each type of EEG signal. The common spatial patterns algorithm is used to obtain the features of the EEG signal. Subsequently, the redundant dictionary with sparse representation is constructed based on these features. Finally, the samples of the EEG types were imported into the FCRes-CNN model having fast down-sampling module and residual block structural units to be identified and classified. The datasets from BCI Competition 2005 (dataset IVa) and BCI Competition 2003 (dataset III) were used to test the performance of the proposed deep learning classifier. The classification experiments show that the recognition averaged accuracy of the proposed method is 98.82%. The experimental results show that the classification method provides better classification performance compared with sparse representation classification (SRC) method. The method can be applied successfully to BCI systems where the amount of data is large due to daily recording.

Minimizing electrodes for effective brain computer interface

The technical industry, the military, or the medical world is benefitted through the most interesting benchmark to our entire society, the Brain-computer interface (BCI). In military applications during close-quarters combat, communication can be established only through the thought process. However, having a large number of electrodes increases the scope for error, as they can get dislodged easily. In the case of motor imagery based BCI, there are discriminative patterns extracted with a Common Spatial Pattern (CSP) algorithm. The KNN classifier has classified the signals into two states. The dataset IV from a BCI competition III is used for evaluating the method. Features are extracted using Common Spatial Patterns and electrodes selected. In this paper, the features are selected using the patterns that have common Spatial, and this extracts features using Electrode selection. Many experiments are conducted for the evaluation of these methods. In this work, an electrode selection mechanism using filter-based techniques is investigated. Experiments show the improvement in the classification accuracy of the ReliefF method.

Internal Feature Selection Method of CSP Based on L1-Norm and Dempster-Shafer Theory.

The common spatial pattern (CSP) algorithm is a well-recognized spatial filtering method for feature extraction in motor imagery (MI)-based brain-computer interfaces (BCIs). However, due to the influence of nonstationary in electroencephalography (EEG) and inherent defects of the CSP objective function, the spatial filters, and their corresponding features are not necessarily optimal in the feature space used within CSP. In this work, we design a new feature selection method to address this issue by selecting features based on an improved objective function. Especially, improvements are made in suppressing outliers and discovering features with larger interclass distances. Moreover, a fusion algorithm based on the Dempster-Shafer theory is proposed, which takes into consideration the distribution of features. With two competition data sets, we first evaluate the performance of the improved objective functions in terms of classification accuracy, feature distribution, and embeddability. Then, a comparison with other feature selection methods is carried out in both accuracy and computational time. Experimental results show that the proposed methods consume less additional computational cost and result in a significant increase in the performance of MI-based BCI systems.

Bi-directional Long Short-Term Memory model to analyze psychological effects on gamers

With the increasing popularity of android gaming applications on smart phones, detection of emotional states of hard-core gamers become the interest of study among psychologists. Although there exist a few interesting research works on the impact of video games over the child and adult group, most of them are only able to throw light on psychological aspects associated with the said cognitive task. The real-time detection of emotional states of the player while playing video game is still an unexplored area of research. The present work feels the void by proposing a novel scheme of detecting the emotional changes of human subject from their electroencephalographic (EEG) signal acquired during their engagement in playing video games. The problem is formulated in the settings of pattern classification, which involves four main steps: Data collection, pre-processing and artifact removal, feature extraction and classification.The novelty of the work lies in extracting the emotional content with a high recognition rate from the acquired EEG response using a deep learning algorithm. The primary contribution of the paper lies in efficient usage of a novel phase-sensitive Common Spatial Pattern algorithm for feature extraction and design of an attention-based Bi-directional Long Short-Term Memory (Bi-LSTM) network for classifying the emotional states of a video-game player into five classes: happiness, sadness, surprise, anger and neutral. Moreover, the scarcity of labeled data in EEG-based brain–computer​ interfacing (BCI) tasks is a serious issue while understanding the performance capabilities of the data-driven deep-learning models. Therefore, the present work also makes an attempt to handle the scarcity in the dimension of the extracted feature using a novel feature augmentation algorithm before feeding the feature-vector to the proposed Bi-LSTM network. Experiments undertaken yield productive and conclusive results that validate the efficacy of the proposed framework with the accuracy rate of 88.71%.

Advanced Machine-Learning Methods for Brain-Computer Interfacing.

The brain-computer interface (BCI) connects the brain and the external world through an information transmission channel by interpreting the physiological information of the brain during thinking activities. The effective classification of electroencephalogram (EEG) signals is the key to improving the performance of the system. To improve the classification accuracy of EEG signals in the BCI system, the transfer learning algorithm and the improved Common Spatial Pattern (CSP) algorithm are combined to construct a data classification model. Finally, the effectiveness of the proposed algorithm is verified. The results show that in actual and imagined movements, the accuracy of the left- and right-hand movements at different speeds is higher than when the speeds are the same. The proposed Adaptive Composite Common Spatial Pattern (ACCSP) and Self Adaptive Common Spatial Pattern (SACSP) algorithms have good classification effects on 5 subjects, with an average classification accuracy rate of 83.58 percent, which is an increase of 6.96 percent compared with traditional algorithms. When the training sample size is 10, the classification accuracy of the ACCSP algorithm is higher than that of the traditional CSP algorithm. The improved CSP algorithm combined with transfer learning embodies a good classification effect in both ACCSP and SACSP. Especially, the performance of SACSP mode is better. Combining the improved CSP algorithm proposed with the CSP-based transfer learning algorithm can improve the classification accuracy of the BCI classifier.

Potential pitfalls of widely used implementations of common spatial patterns.

We have uncovered serious flaws in handling EEG signals with a decreased rank in implementations of the common spatial patterns (CSP). The CSP algorithm assumes covariance matrices of the signal to have full rank. However, preprocessing techniques, such as artifact removal using independent component analysis, may decrease the rank of the signal, leading to potential errors in the CSP decomposition. We inspect what could go wrong when CSP implementations do not take this into consideration on a binary motor imagery classification task. We review CSP implementations in open-source toolboxes for EEG signal analysis (FieldTrip, BBCI Toolbox, BioSig, EEGLAB, BCILAB, and MNE). We show that unprotected implementations decreased mean classification accuracy by up to 32%, with spatial filters resulting in complex numbers, for which corresponding spatial patterns do not have a clear interpretation. We encourage researchers to check their implementations and analysis pipelines.

A Computationally Efficient Multiclass Time-Frequency Common Spatial Pattern Analysis on EEG Motor Imagery.

Common spatial pattern (CSP) is a popular feature extraction method for electroencephalogram (EEG) motor imagery (MI). This study modifies the conventional CSP algorithm to improve the multi-class MI classification accuracy and ensure the computation process is efficient. The EEG MI data is gathered from the Brain-Computer Interface (BCI) Competition IV. At first, a bandpass filter and a timefrequency analysis are performed for each experiment trial. Then, the optimal EEG signals for every experiment trials are selected based on the signal energy for CSP feature extraction. In the end, the extracted features are classified by three classifiers, linear discriminant analysis (LDA), naïve Bayes (NVB), and support vector machine (SVM), in parallel for classification accuracy comparison.The experiment results show the proposed algorithm average computation time is 37.22% less than the FBCSP (1st winner in the BCI Competition IV) and 4.98% longer than the conventional CSP method. For the classification rate, the proposed algorithm kappa value achieved 2nd highest compared with the top 3 winners in BCI Competition IV.

Improvement motor imagery EEG classification based on sparse common spatial pattern and regularized discriminant analysis

BackgroundThe classification of psychological tasks such as motor imagery based on electroencephalography (EEG) signals is an essential issue in the brain computer interface (BCI) system. The feature extraction is an important issue for improving classification accuracy of BCI system. New MethodFor extracting discriminative features, common spatial pattern (CSP) is an effective feature extraction method. However, features extracted by CSP are dense, and even feature patterns are repeatedly selected in the feature space. A sparse CSP algorithm is proposed, which embeds the sparse techniques and iterative search into the CSP. To improve the classification performance, two regularization parameters are added to the traditional linear discriminant analysis (LDA). ResultsThe sparse CSP algorithm can select several channels of EEG signals with the most obvious features. The improved regularized discriminant analysis is used to solve the singularity problem and improve the feature classification accuracy.Comparison with Existing Method(s): The proposed algorithm was evaluated by the data set I of the IVth BCI competition and our dataset. The experimental results of the BCI competition dataset show that accuracy of the improved algorithm is 10.75 % higher than that of the traditional algorithm. Comparing with the currently existing methods for the same data, it also shows excellent classification performance. The effectiveness of the improved algorithm is also shown in experiments on our dataset. ConclusionsIt sufficiently proves that the improved algorithm proposed in this paper improves the classification performance of motor intent recognition.

Temporal Combination Pattern Optimization Based on Feature Selection Method for Motor Imagery BCIs.

Common spatial pattern (CSP) method is widely used for spatial filtering and brain pattern extraction from electroencephalogram (EEG) signals in motor imagery (MI)-based brain-computer interfaces (BCIs). The participant-specific time window relative to the visual cue has a significant impact on the effectiveness of the CSP. However, the time window is usually selected experientially or manually. To solve this problem, we propose a novel feature selection approach for MI-based BCIs. Specifically, multiple time segments were obtained by decomposing each EEG sample of the MI task. Furthermore, the features were extracted by CSP from each time segment and were combined to form a new feature vector. Finally, the optimal temporal combination patterns for the new feature vector were selected based on four feature selection algorithms, i.e., mutual information, least absolute shrinkage and selection operator, principal component analysis and stepwise linear discriminant analysis (denoted as MUIN, LASSO, PCA, and SWLDA, respectively), and the classification algorithm was employed to evaluate the average classification accuracy. With three BCI competition datasets, the results of the four proposed algorithms were compared with traditional CSP algorithm in classification accuracy. Experimental results show that compared with traditional algorithm, the proposed methods significantly improve performance. Specifically, the LASSO achieved the highest accuracy (88.58%) among the proposed methods. Importantly, the average classification accuracies using the proposed approaches significantly improved 10.14% (MUIN), 11.40% (LASSO), 6.08% (PCA), and 10.25% (SWLDA) compared to that using CSP. These results indicate that the proposed approach is expected to be practical in MI-based BCIs.

An adaptive multi-domain feature joint optimization framework based on composite kernels and ant colony optimization for motor imagery EEG classification

Brain computer interface (BCI) is a novel technology that translates human intention into command to control external device. Common spatial pattern (CSP) algorithm is most frequently applied for feature engineering in motor imagery (MI) based BCI system. How to select the most suitable spatial channels, temporal & frequency parameters for different people before CSP is still a challenging issue which greatly affects the performance of MI based BCI system. In this paper, we introduce an adaptive multi-domain feature joint optimization framework. Specifically, random forest (RF) and composite kernel support vector machine (CKSVM) algorithms are used to measure the significances of different spatial channels and local temporal-frequency segments. An ant colony optimization (ACO) based scheme is proposed to search the most suitable spatial channels and temporal-frequency segments. We evaluated the effectiveness of the proposed algorithm on public BCI competition III data set IVa and two self-collected MI EEG datasets. For BCI competition III data set IVa, our method outperforms some other close related algorithms in the literature. For the two self-collected datasets, compared to the traditional manual parameter setting, the classification performance is proven to significantly improve (more than 15%) adopting our adaptive multi-domain parameters. Since our proposed method can simultaneously and automatically optimize subject-specific features in the entire spatial-temporal-frequency domains, the most discriminative CSP features can be selected and the performance of MI EEG classification is significantly improved. Thus, our research is a useful complement to the BCI field.

An improved common spatial pattern combined with channel-selection strategy for electroencephalography-based emotion recognition

Emotional human-computer interaction (HCI) has become an important research area in the fields of artificial intelligence and cognitive science, owing to the requirement for active emotion perception. To enhance the performance of electroencephalography (EEG)-based emotional HCI, this paper proposes an improved common spatial pattern combined with a channel-selection strategy (ICSPCS) for EEG-based emotion recognition. Specifically, we first use a common spatial pattern algorithm to design a spatial domain filter according to three different emotions (positive, neutral, and negative). The traditional joint approximation diagonalization method using the criterion of the “highest score eigenvalue” may be unable to solve multiple classifications of emotion representation. Therefore, we design three different eigenvalue selection methods in terms of the positions of the eigenvalues with the highest scores. Finally, to make the installation easier and reduce the computational load, we also develop a channel-selection strategy based on the weight values that individually reflect the degrees of influence of all the channels on emotion recognition. Experiments are conducted on a self-collected dataset and on the MAHNOB-HCI dataset. The average recognition accuracies for the three emotion tasks are found to be 85.85% and 94.13% on the self-collected and MAHNOB-HCI datasets, respectively, thus proving the effectiveness of the proposed ICSPCS method for emotion recognition.