Standards Committee Research Articles

Standards Quiz Show: An Introduction to Using Standards in Serials & Electronic Resources Work

Standards are an important part of serials and electronic resources work, which makes standards important to NASIG. Beth Ashmore, Jen Montavon-Green, and Matthew Ragucci discuss the importance of standards to this work, the role of NASIG’s Standards Committee in representing NASIG’s interests to the standards community, and opportunities for others to get involved in shaping standards. Their program was a highly-interactive session which culminated in a Jeopardy!-style game show for session attendees.

STRUCTURAL AND LUMIENESCENT STUDY OF EUROPIUM (III) DOPED TUNGSTATES

Motivated by the need of new red phosphor for white - light - emitting diodes (WLEDs) application, Eu3+ doped Sc2-xInx(WO4)3 (x = 0, 1, 2) solid solutions were synthesized by high temperature solid - state reaction. Structural and luminescent properties were obtained by using X - ray diffraction (XRD), infrared and photoluminescence spectroscopic techniques. IR spectrum of the ScIn(WO4)3 doped with Eu3+ contains the characteristic vibrations of the WO4 and MeO6 , (Me = Sc, In) polyhedral, building the Sc2(WO4)3 and In2(WO4)3 structures. An effective energy transfer from the tungstate matrix to the active Eu3+ ion was observed. Intense red luminescence was obtained in these samples under excitation at 394 nm using the sharp 7F0 → 5L6 transition of Eu3+. The calculated asymmetric ratio ( 5D0 → 7F2 / 5D0 → 7F1 ) was about 7.5, suggesting that the obtained materials are characterized with distorted environment around the rare earth ion and with high red emission intensity. The prepared ScIn(WO4)3 solid solution demonstrates the highest emission intensity. The obtained chromaticity coordinates of the Eu3+ doped Sc2-xInx(WO4)3 solid solutions were very close to the red standard recommended by National Television Standards Committee (NTSC).

Spiro-Carbon-Locking and Sulfur-Embedding Strategy for Constructing Deep-Red Organic Electroluminescent Emitter with High Efficiency.

The discovery of multiple resonance thermally activated delayed fluorescence (MR-TADF) materials with remarkable narrowband emission has opened a new avenue for the development of organic light-emitting diodes (OLEDs) with high color purity. However, the lack of construction strategies for purely red MR-TADF materials significantly impedes their application in full-color high-definition displays. Herein, we propose a unique and handy approach of spiro-carbon-locking and sulfur-embedding strategy to modify the parent MR-TADF framework, resulting in a red MR-TADF emitter with high color purity. The reported MR-TADF molecule (namely, FSBN) demonstrates a pure red emission with an emission maximum of 621 nm in toluene solution. The OLED with FSBN as emitter exhibits Commission Internationale de l'Éclairage (CIE) coordinates of (0.67, 0.33), which exactly matches the red standard defined by the National Television Standards Committee (NTSC). Importantly, the single-host OLED achieves a high power efficiency (PE) of up to 50.1 lm W-1, suggesting the potential for the development of low power consumption red OLEDs.

Spiro‐Carbon‐Locking and Sulfur‐Embedding Strategy for Constructing Deep‐Red Organic Electroluminescent Emitter with High Efficiency

The discovery of multiple resonance thermally activated delayed fluorescence (MR‐TADF) materials with remarkable narrowband emission has opened a new avenue for the development of organic light‐emitting diodes (OLEDs) with high color purity. However, the lack of construction strategies for purely red MR‐TADF materials significantly impedes their application in full‐color high‐definition displays. Herein, we propose a unique and handy approach of spiro‐carbon‐locking and sulfur‐embedding strategy to modify the parent MR‐TADF framework, resulting in a red MR‐TADF emitter with high color purity. The reported MR‐TADF molecule (namely, FSBN) demonstrates a pure red emission with an emission maximum of 621 nm in toluene solution. The OLED with FSBN as emitter exhibits Commission Internationale de l’Éclairage (CIE) coordinates of (0.67, 0.33), which exactly matches the red standard defined by the National Television Standards Committee (NTSC). Importantly, the single‐host OLED achieves a high power efficiency (PE) of up to 50.1 lm W−1, suggesting the potential for the development of low power consumption red OLEDs.

Converging profile relationships for offshore wind speed and turbulence intensity

Abstract. This paper reduces uncertainty in the quantification of offshore wind speed and turbulence intensity. A range of industry standard relationships, including those from International Electrotechnical Commission (IEC) and International Organization for Standardization (ISO), are compared with an extensive set of met mast data collected offshore northwestern Europe over recent decades. Analysis initially focused on over 1000 independent storm peak events identified within the 10 min mean wind speed data. Time series and coherent vertical profiles were subjected to detailed scrutiny and analysis, considering wind speeds at various averaging periods, turbulence intensity and gust factors. Most peak events were associated with neutral atmospheric conditions, so they were well represented by the ISO Frøya profile, with a shear close to the IEC power law exponent of α= 0.11. A new pragmatic approximation of atmospheric stability in terms of relative shear is outlined, bringing together key elements of the IEC and ISO standards. New empirical relationships to quantify offshore wind ambient turbulence intensity are described. A simple generalised form of gust factor relationship is adopted, with a coefficient that varies with averaging period. Distinct recommendations are made for estimating peak 10 min mean winds from peaks in 1 or 3 h mean winds. Finally, a simplified workflow for the estimation of extreme offshore winds is used to show how IEC and ISO relationships can be effectively combined.

Mepacrine Flow Cytometry Assay for the Diagnosis of Platelet δ-granule Defects: Literature Review on Methods-Towards a Shared Detailed Protocol.

Accurate assessment of platelet secretion is essential for the diagnosis of inherited or acquired platelet function disorders and more specifically in identifying δ-storage pool disease. Mepacrine, a fluorescent dye, specifically accumulates in platelet δ-granules. The mepacrine flow cytometry (mepacrine FCM) assay has been used for more than half a century in the clinical laboratory as a diagnostic tool for platelet δ-granule disorders. The assay requires a small volume of blood, can be performed in thrombocytopenic patients, provides rapid assessment of δ-granule content and secretion, and, thus, enables differentiation between storage and release defects. There is however a broad heterogeneity in methods, reagents, and equipment used. Lack of standardization and limited data on analytical and clinical performances have led the 2022 ISTH SSC (International Society on Thrombosis and Haemostasis Scientific and Standardization Committee) Subcommittee on Platelet Physiology expert consensus to rate this assay as simple but of uncertain value. Yet, the data used by experts to formulate the recommendations were not discussed and even not mentioned. Guidance for laboratory studies of platelet secretion assay would be very helpful for clinical laboratories and health authorities especially considering the implications of the new In Vitro Diagnostic Regulation in Europe. The purpose of the present work was to review the reported methodologies for the mepacrine FCM assay and to offer an example of detailed protocol. This would help standardization and pave the way for more rigorous comparative studies.

Dual-shell protection enables highly efficient and stable all-inorganic perovskite composites for light-emitting-diodes

Lead-halide perovskite nanocrystals (NCs) present superior photoelectric properties, but the poor stability seriously hinders their practical application. The encapsulation of perovskite NCs inside mesoporous silica (m-SiO2) matrix is considered as one of the most feasible pathways to improve the stability of NCs. However, the challenges of loose encapsulation structure, aggregation of particles, high energy consumption during the preparation of CsPbX3@m-SiO2 composites have not yet been overcome, which throw a shadow over the large-scale commercial applications. Here, we present a dual-shell encapsulation strategy that enables the formation of highly emissive CsPbBr3@m-SiO2@SiO2 composites, achieving an exceptional photoluminescence quantum yield (PLQY) of 97.37 %. The reaction parameters for the preparation of composites are meticulous investigated. The CsPbBr3 NCs can be well formed inside the pores of m-SiO2 as the m-SiO2 is introduced into the precursor solution. The secondary SiO2 shells can effectively seal the open pores of m-SiO2. As a result, the as-prepared CsPbBr3@m-SiO2@SiO2 composites present excellent stability, in which the composites can maintain 93.16 % of initial intensity after storage for 84 days. Besides, a series of CsPbX3@m-SiO2@SiO2 composites with tunable emission wavelength in the range of 428.6–630.6 nm are prepared through facile designing the halide ratios of precursor solution, which present a wide color gamut (148.48 % of the National Television Standards Committee). In addition, a white light-emitting diode (LED) is fabricated by combining CsPbBr3@m-SiO2@SiO2 composites and K2SiF6:Mn4+ phosphors with a 455 nm LED chip, which exhibits good photoelectric performances. This facile low-temperature dual-shell encapsulation strategy reported here provides a new pathway for preparing high-performance perovskite composites, facilitating their practical photoelectric application.

High color purity aluminate phosphor SryCa1-x-yAl12O19: xEu2+ for lighting and backlight display applications

In the context of the rapid advances in electronic information technology, the advancement of novel high-efficiency narrow-band blue phosphors represents a pivotal step in the advancement of high-quality liquid crystal displays (LCDs), as well as the development of white light-emitting diodes (WLEDs) with a reduced correlated color temperature (CCT). In this study, based on the sensitivity of Eu2+ emission to local environment, the alkaline earth aluminate material CaAl12O19 with high structural symmetry was selected as the matrix, and the symmetry of crystal structure was improved by replacing Ca2+ with Sr2+, the narrow-band emission of the phosphor is realized. The Sr0.9Ca0.09Al12O19: 0.01Eu2+ (SCAO: Eu2+) phosphor exhibited narrow-band emission with the full width at half maximum (FWHM) of 45.76 nm, and the colour purity of up to 95.46 %. Moreover, the internal quantum efficiency (IQE) of SCAO: Eu2+ has been demonstrated to reach 81.70 %. In addition, SCAO: Eu2+ phosphor, (Ba, Sr)2SiO4: Eu2+ phosphor, CaAlSiN3: Eu2+ phosphor, and 275 nm UVLED chips were combined to prepare white LED devices exhibiting a low color temperature (3733 K). The three-band LEDs of SCAO: Eu2+, β-Sialon: Eu2+ and K2SiF6: Mn4+ exhibited a colour gamut covering 84.75 % of the National Television Standards Committee (NTSC) standard. This indicates that the phosphor possesses the characteristics of a highly effective narrow-band blue-light-emitting substance with considerable potential for utilization in lighting and backlighting displays.

IPNA consensus definitions for clinical trial outcomes in steroid-resistant nephrotic syndrome.

Assessment of the true impact of therapeutic interventions is a challenge in the absence of universal, standardized definitions for clinical trial endpoints in children with kidney diseases. Steroid-resistant nephrotic syndrome (SRNS) is a difficult kidney disease to treat, with unremitting disease progressing to kidney failure. Currently, available therapies result in suboptimal cure rates. Clinical trials with innovative, targeted treatments will likely be conducted for this disease in the foreseeable future. An international consortium of the IPNA Best Practices and Standards Committee and the Pediatric Nephrology Expert Group of the conect4children (c4c) network developed through consensus, standardized, internationally acceptable definitions for trial outcomes for SRNS. The endpoint definitions were formulated for use with urine protein to creatinine ratios and estimated glomerular filtration rates. Definitions of complete remission, partial remission, non-remission of disease, reduction in proteinuria, kidney disease progression, kidney failure, and composite kidney outcome were refined using an iterative process until a consensus was achieved.

Understanding Standard Procedure in Auditory Brainstem Response: Importance of Normative Data.

The auditory brainstem response (ABR) is a noninvasive test that measures neural activity in response to auditory stimuli. Racial differences in head shape have provided strong evidence for specific normative data and accurate device calibration. International standards emphasize the need for standardized procedures and references. This study aimed to outline the standard procedure and related normative ABR values. Standard procedures were performed according to International Electrotechnical Commission (IEC) standards. Five studies from two countries were included to compare the normative values of the ABR. The dataset from the National Standard Reference Data Center (NSRDC) was used as reference. Normative values were described in terms of stimuli, latency, and amplitude. For click stimuli, the latency of the ABR showed different patterns across populations, such as those from Korea and the USA. Although the latencies reported by the NSRDC and for Koreans were relatively short, those reported for USA populations were longer. Using clicks, it was shown that the USA population had the largest ABR amplitude compared to those reported for the other two datasets. For Wave V latency using tone bursts, a similar pattern was identified with click stimuli. Frequency-specific trends were also observed. Although there is a lack of ABR datasets, the information and insights of the present study could be utilized as standard guidelines in research on ABR.

The measurement of tire-road noise: how does standardization contribute to the development of low noise pavements in Europe

Low-noise road pavements are among the most effective solutions for reducing road traffic noise emission at the source. There was a significant international effort over the past years for developing and standardizing methods for measuring tire-road noise emission, essentially Statistical Pass-By (SPB) and Close ProXimity (CPX) methods. The dedicated Working Group of the European Committee for Standardization (CEN/TC227/WG5) recently investigated how these standards are used in practice and how they contribute to the implementation of low-noise pavements. For this, a survey was launched and 14 European countries responded on their practices. The survey showed a large diversity of use, although all refer to the measurement methods SPB, CPX. Based on these methods, some countries have developed national regulations or reference guidelines to specify and assess the acoustic performance of road surfaces. These procedures are, however, significantly different and lead to varying definitions of low-noise pavements, which prevents sharing knowledge, experience and data. This context justifies the ongoing development within CEN/TC227/WG5 of a standard procedure for the acoustic characterization of road pavements based on existing measurement methods. The paper will present and analyze the results of the survey, then will present the ongoing work in CEN.

Information Standards and Guidelines on AI: Ethical Concerns, Trustworthiness, Quality Assessment, and Human Oversight

ABSTRACTThis panel, sponsored by the ASIS&T Standards Committee, has two purposes. First, the panel gives a brief report on the most recent activities of the national and international standards in the field of information science and technologies in which the ASIS&T Standards Committee and members have been involved. More importantly, the panel will focus on several recent significant standardization efforts that address the ethical concerns, trustworthiness, quality assessment, and human oversight of artificial intelligence (AI) systems. A final open discussion on these issues will involve the audience, to highlight the benefits, challenges, and standards needed while addressing the important role of information science within our evolving society.

Sustainability Rules

Europump’s Frank Ennenbach, chair of the association’s Standards Commission, looks at the latest sustainability standards impacting the pumps sector and how these are set to foster innovation and circularity

The Evolution Of International Financial Reporting Standards (IFRS) And Its Impact On Global Business Practices

The International Financial Reporting Standards (IFRS) have undergone significant evolution over the years, shaping the financial reporting on a global scale. The journey of IFRS began with the establishment of the International Accounting Standards Committee (IASC) in 1973, which laid the foundation for international accounting harmonization. Over time, the IASC transformed into the International Accounting Standards Board (IASB), which took on the responsibility of developing and issuing IFRS. The adoption of IFRS has become increasingly widespread, with many countries around the world either adopting the standards outright or converging their national standards with IFRS. One of the primary objectives of IFRS is to enhance the comparability, transparency, and reliability of financial reporting across borders. By providing a common set of accounting principles, IFRS facilitates better communication and understanding among stakeholders, including investors, creditors, regulators and other users of financial information. This standardization promotes efficiency in capital markets and encourages cross-border or cross-nation investment and business activities. IFRS is characterized by its principles-based approach, which emphasizes substance over form and allows for greater flexibility in financial reporting. Unlike rules-based standards, which prescribe specific treatments for various transactions, principles-based standards provide a framework for judgment, allowing preparers to alter their financial statements to reflect the economic reality of their transactions. The impact of IFRS extends beyond financial reporting to areas such as taxation, auditing, and regulatory compliance. While the adoption of IFRS has brought many benefits, it has also presented challenges for companies and regulators alike. The evolution of IFRS has had a profound impact on global business practices, promoting greater transparency, comparability, and efficiency in financial reporting. Through an examination of the evolution of IFRS, this research contributes to a deeper understanding of its profound influence on global business practices

GRNet:Geometry Restoration for G-PCC Compressed Point Clouds Using Auxiliary Density Signaling.

The lossy Geometry-based Point Cloud Compression (G-PCC) inevitably impairs the geometry information of point clouds, which deteriorates the quality of experience (QoE) in reconstruction and/or misleads decisions in tasks such as classification. To tackle it, this work proposes GRNet for the geometry restoration of G-PCC compressed large-scale point clouds. By analyzing the content characteristics of original and G-PCC compressed point clouds, we attribute the G-PCC distortion to two key factors: point vanishing and point displacement. Visible impairments on a point cloud are usually dominated by an individual factor or superimposed by both factors, which are determined by the density of the original point cloud. To this end, we employ two different models for coordinate reconstruction, termed Coordinate Expansion and Coordinate Refinement, to attack the point vanishing and displacement, respectively. In addition, 4-byte auxiliary density information is signaled in the bitstream to assist the selection of Coordinate Expansion, Coordinate Refinement, or their combination. Before being fed into the coordinate reconstruction module, the G-PCC compressed point cloud is first processed by a Feature Analysis Module for multiscale information fusion, in which kNN-based Transformer is leveraged at each scale to adaptively characterize neighborhood geometric dynamics for effective restoration. Following the common test conditions recommended in the MPEG standardization committee, GRNet significantly improves the G-PCC anchor and remarkably outperforms state-of-the-art methods on a great variety of point clouds (e.g., solid, dense, and sparse samples) both quantitatively and qualitatively. Meanwhile, GRNet runs fairly fast and uses a smaller-size model when compared with existing learning-based approaches, making it attractive to industry practitioners.

Safety assessment of introducing radioactive waste incineration facilities in Korea: An off-site resident dose evaluation

As nuclear power technology advances, radioactive waste accumulation rises, necessitating measures to alleviate strain on disposal facilities and minimize waste management costs. Analysis of radioactive waste composition revealed that combustible waste comprised the largest proportion (45 %), with incineration demonstrating high reduction efficiency for this fraction. In order for a radioactive waste incineration facility to be introduced, it is necessary to evaluate the safety of gas radioactive effluent generated during city operation. Evaluation criteria have already been established and methodologies also exist, but these results greatly depend on the area where the incineration facilities are located, the waste to be treated, the operation method of the facilities. Accordingly, this study assumed annual throughput and radionuclide concentrations based on the radioactive waste stored and generated in Korea. The centralized operation method at a specific site was compared with the decentralized operation method employed at all sites. Post-incineration, the impact of radionuclides released from the facilities was analyzed against Nuclear Safety and Security Commission standards, confirming the discharge standards and doses for single facilities and entire sites.

INTERNATIONAL FINANCIAL REPORTING STANDARDS (IFRS) VS. US GAAP: A GLOBAL PERSPECTIVE

In light of the growing tendency of firms extending their operations into international markets, the adoption of worldwide accounting standards has become more urgent. The direction of attempts to bring international accounting standards closer to parity with US GAAP has been drastically changed as a result of two recent opinions issued by the SEC with a considerable impact. This article discusses the consequences that the SEC's decision to allow international enterprises to use IFRS in financial reporting, separate from reconciliation to US GAAP, has had on investors, multinational corporations, and global financial reporting by examining the implications of this decision. The idea that the Securities and Exchange Commission (SEC) has to bring together foreign authorities to discuss the harmonization of accounting standards is also discussed. According to the Securities and Exchange Commission (2018), the International Accounting Standards Committee Foundation (IASCF) is planning to establish a Monitoring Group that will include of the European Commission, the Japan Financial Services Agency, and the International Organization of Securities Commission (IOSC). In this section, we will examine the differences between IFRS and US GAAP. After careful consideration, the authors have arrived at the conclusion that there is an immediate need for a unified set of global accounting standards that are based on both IFRS and US GAAP. Many of the problems that have been plaguing the globe's financial reporting system will be resolved, and as a consequence, the economy of the whole world will become more secure and prosperous.

Determination of pesticide residues in beans using QuEChERS technique coupled to gas chromatography-mass spectrometry: Multivariate optimization of CEN and AOAC methods

The use of pesticides has led to environmental pollution and posed a global health risk, since they remain as residues on foods. Beans one of the most widely cultivated crop in Africa, and susceptible to attack by insects both on field and during storage, leading to the application of pesticides to control pests' infestation. However, misuse of these chemicals by farmers on beans has resulted in the rejection of beans exported to European countries, due to the presence of pesticide residues at concentrations higher than the maximum residues levels (MRLs). In this study, the effectiveness of the Association Official Analytical Chemists (AOAC) Official Method and the European Committee of Standardization (CEN) Standard Method, were determined using multivariate approach for the analysis of organochlorine pesticide residues in 6 varieties of beans samples. The significance of factors (mass of sample, volume of acetonitrile, mass of magnesium sulphate, sample pH, centrifugation time and speed) affecting the efficiency of extraction was estimated using Plackett-Burman design, while central composite design was used to optimize the significant factors. The following optimum factors were subsequently used for method validation, recovery tests, and real sample analysis: 4 g of sample sludge (1:1 v/v), 10 mL of acetonitrile, 4.45 g of MgSO4, and 5 min of centrifugation at 5000 rpm. The figure of merit of analytical methodology estimated using matrix-matched internal standard calibration method gave linearity ranging from 0.25 to 500 μg/kg, with correlation coefficient (R2) greater than 0.99, the recovery ranged from 75.55 to 110.41 (RSD = 0.70–16.65), with LOD and LOQ of 0.23–1.77 μg/kg and 0.76–5.88 μg/kg, respectively.

Enhancing Optical Properties of Zn-Mn Solid Solution Hybrid Halides for Wide Color Gamut Backlight Displays.

Hybrid metal halides display a range of optical properties and hold promise for various applications such as solid-state lighting, anti-counterfeiting measures, backlight displays, and X-ray detection. The incorporation of zinc into (C13H26N)2MnBr4 aims to enhance its structural rigidity and improve its narrow band green light emission properties. The resulting (C13H26N)2ZnBr4 compound exhibits an identical crystal structure to (C13H26N)2MnBr4, indicating the potential for a solid solution of varying Zn and Mn ratios within this structural framework. (C13H26N)2Zn0.2Mn0.8Br4 exhibits significantly enhanced properties, including a photoluminescence quantum yield of 92%, a minimum full width at half maximum of 43nm, and 85% retention of room temperature emission at 420K. Additionally, crystals of (C13H26N)2ZnCl4 and (C7H18N)2ZnX4 (X = Br, I) are synthesized, with (C7H18N)2ZnBr4 displaying luminescent color changes dependent on excitation. (C7H18N)2Zn0.2Mn0.8Br4 demonstrates reversible phase transitions and alterations in optical properties. A white light-emitting diode utilizing (C13H26N)2Zn0.2Mn0.8Br4 and commercial phosphors exhibited a color gamut of 112.2% of the National Television Standards Committee 1931 Standard. This investigation introduces a stable and highly efficient narrow-band green phosphor suitable for displays.

ASNR Statement on Gadolinium-Based Contrast Agent Use in Patients with Chronic Kidney Disease.

Beginning in 2006, neuroradiologists became increasingly aware of the risk of nephrogenic system fibrosis (NSF) when patients suffering from chronic kidney disease (CKD) received gadolinium-based contrast agents (GBCAs) in conjunction with MRI scans. Radiology practices began withholding GBCAs from MRI patients with substantial CKD and instated a variety of safety measures to ensure that these individuals did not inadvertently receive GBCAs. As a result, the worldwide incidence of NSF was dramatically reduced. Since that time, a wealth of research on NSF and its etiology has found few unconfounded cases associated with those GBCAs categorized as Group II agents by the American College of Radiology. In 2023 and 2024, members of the American Society of Neuroradiology (ASNR) Standards and Guidelines Committee reviewed new research evidence on GBCA safety and its relevance to current MRI contrast administration guidelines for patients with CKD. This focused on systematic reviews and meta-analyses conducted during the past five years. Upon consideration of this literature, recommendations for administration of GBCAs to patients with CKD were formulated. For neuroimaging applications, the ASNR recommends that Group II GBCAs no longer be withheld in patients with CKD when these agents are medically indicated for diagnosis. Moreover, if Group II GBCAs are exclusively used in an MRI practice, other safety measures such as checking renal function or querying patients about chronic kidney disease can be discontinued. ACR = American College of Radiology; ASNR = American Society of Neuroradiology; CKD = chronic kidney disease; GBCA = gadolinium-based contrast agent; NSF = nephrogenic systemic fibrosis.