Commercial Silver Nanoparticles Research Articles

Single and Combined Effects of Phenanthrene and Silver Nanoparticles on Denitrification Processes in Coastal Marine Sediments.

The increasing production and utilization of polycyclic aromatic hydrocarbons (PAHs) and commercial silver nanoparticles (AgNPs) have raised concerns about their potential environmental release, with coastal sediments as a substantial sink. To better understanding the effects of these contaminants on denitrification processes in coastal marine sediments, a short-term exposure simulation experiment was conducted. We investigated the effects of single and combined contamination of phenanthrene (Phe) and AgNPs on denitrification processes in a coastal marine sediment. Results showed that all contaminated treatment groups had different degrees of inhibitory effect on denitrification activity, denitrifying enzyme activity, total bacteria count and denitrifying genes. The inhibitory effect sequence of each treatment group was combined treatment > AgNPs treatment > Phe treatment. Moreover, the inhibitory effects of denitrifying genes were much larger than that of total bacteria count, indicating that the pollutants had specific toxic effects on denitrifying bacteria. The sequence of sensitivity of three reduction process to pollutants was N2O > NO2- > NO3-. All contaminated treatment groups could increase NO3-, NO2- and N2O accumulation. Furthermore, according to the linear relationship between functional gene or reductase and denitrification process, we also found that the abundance of denitrifying genes could better predict the influence of Phe and AgNPs on sediment denitrification than the denitrifying bacterial diversity. In addition, at the genus level, the community structure of nirS- and nosZ-type denitrifying bacteria changed dramatically, while changes at the phylum level were comparatively less pronounced. Single and combined contamination of Phe and AgNPs could reduce the dominance of Pseudomonas, which may lead to a potential slow-down in the degradation of Phe and inhibition of denitrification, especially the combined contamination. Overall, our study revealed that combined contamination of Phe and AgNPs could lead to an increase in NO3-, NO2- and N2O accumulation in coastal sediment, which poses a risk of eutrophication in coastal areas, exacerbates the greenhouse effect and has adverse effects on global climate change.

Green synthesis and anthelmintic activity of silver nanoparticles using Morus Alba Fruit extract against different stages of equine strongyles.

The current study was designed to green synthesize silver nanoparticles (GRAgNPs) using Morus alba fruit extract and evaluate their nematicidal effects against strongyle nematodes compared to commercial silver nanoparticles (CAgNPs) in vitro. The nanoparticles were characterized by Ultraviolet-visual absorption spectrography, transmission electron microscopy, and X-ray diffraction. Next, uptake of AgNPs by the first stage larvae (L1), egg hatch inhibition (EHI) and the motility of infectious larvae (L3s), and the ultrastructural analysis of the eggs and worms were conducted. Moreover, some of oxidative/nitrosative stress indicators, including total antioxidant status content (TAC), protein carbonylation (PCO), lipid peroxidation (MDA), and DNA damage were assessed in the homogenized samples of strongyle L3s. We found that the GRAgNPs had spherical shape, 20-30nm in diameter with rough surface. Following incubation with GRAgNPs at concentrations of 43.40, 21.70 and 10.85 ppm and CAgNPs at concentrations of 43.40 and 21.70, EHI was more than 90%. In addition, concentrations of 43.40 and 21.70 ppm of GRAgNPs led to inhibition of larval motility by more than 90%. The LC50 at 24h of treatment for GRAgNPs and CAgNPs was determined to be 8.62 and 10.34 ppm, respectively. GRAgNPs and CAgNPs, in a concentration-dependent manner, resulted in the induction of oxidative/nitrosative stress evidenced by decreased TAC levels, and increased levels of MDA and PCO, together with increased DNA damage. The uptake of AgNPs by the L1 larvae revealed that FITC labeled GRAgNPs fluoresced with high intensity largely in the intestinal area. Scanning Electron Microscopy analysis of eggs and larvae revealed that GRAgNPs penetrated the cuticle of larvae, changed the tegmentum, and ultimately killed the worm. In conclusion, GRAgNPs had more robust anthelminthic effects than the standard antiparasitic and CAgNPs. They could be considered as a promising antiparasitic agent.

Antifungal potential of commercial silver nanoparticles against rice blast pathogen Magnaporthe oryzae

The rice blast caused by Magnaporthe oryzae is one of the major and recurrent threats to sustainable rice production in Bangladesh. To mitigate this problem, the present study was undertaken with the aim to investigate the inhibitory effects of commercially available silver nanoparticles (Ag-NPs) on the growth and development of Magnaporthe oryzae, and control of rice blast disease. In vitro experiments demonstrated that Ag-NPs significantly suppressed the radial growth of fungal mycelium, with the highest inhibition (83.54%) at a concentration of 250 ppm, while Trooper 75 WP at 400 ppm completely inhibited the fungal mycelial growth. The production of conidia and colony formation were also reduced significantly by Ag-NPs treatment. Furthermore, Ag-NPs exhibited a substantial inhibitory effect on the germination of M. oryzae conidia, with complete inhibition observed at concentrations between 200 and 250 ppm. Comparative analyses revealed that the fungicidal effect of Ag-NPs was superior to silver nitrate (AgNO3), suggesting the augmented activity of the nano properties. The sensitivity of M. oryzae to Ag-NPs was determined by calculating EC50 and EC95 values, which indicated a mean EC50 value of 131.5 ppm and a mean EC95 value of 276 ppm. Additionally, in vivo experiments showed that preventive and curative treatments with Ag-NPs significantly reduced disease incidence and severity in rice plants infected with M. oryzae, with efficacy comparable to that of the fungicide Trooper 75 WP. At higher concentrations of Ag-NPs, preventive treatment was found to be more effective than curative treatment in disease control. These findings highlighted the potential of Ag-NPs as an effective alternative for the management of rice blast. Ann. Bangladesh Agric. (2023) 27 (1): 17-30

A novel approach to improve reliability of aerosol jet printing process

Additive manufacturing is gaining interest for printing of noble metals. In this study, aerosol jet printing was applied to fabricate traces from commercial silver nanoparticle ink. A self-built three dimensional printing machine was used without or with in-line substrate heating. Subsequently, sintering was conducted by furnace or near-infrared source. Examination of the sample using scanning electron and atomic force microscopy revealed the existence of both micro- and nanoscale pores in the structure. Local open porosity, aerosol extensive spatter and wide porous overspray were key defects found in samples printed without substrate heating. All the features affect the properties and reliability of silver prints. In-line process heating increased the concentration of nanoparticles and limited defects formation. The final structure was influenced by sintering method and its time. Elongated time of sintering decreased porosity and roughness of the printed traces. Nevertheless, IR sintering provided the smoothest sample surface, and significantly improved bonding of aggregates.

Biocompatible and antimicrobial chitosan/PVP/PEO/PAA/AgNP composite hydrogels synthesized by e-beam cross-linking

Novel biocompatible composite hydrogels with good elastic and antimicrobial properties have been fabricated by e-beam cross-linking using chitosan and water-soluble polymers mixed with commercial silver nanoparticles (AgNP). Hydrogels having different formulations were characterized by rheological, swelling, FTIR, SEM, and biodegradation measurements. The network structure, biocompatibility, and antimicrobial properties were evaluated as well. The composite hydrogels showed higher stability and absorb large amounts of fluids specific to an infected wound without losing structural integrity. The rheological, SEM, and network structure results demonstrate that at above 0.1 mg/mL AgNP, hydrogels with high cross-linking density are obtained. The in vitro response of fibroblasts proved the high biocompatibility of the hydrogel's composites. The antimicrobial activity is directly influenced by the amount of AgNP and cross-linking degree of the hydrogel. Significant antimicrobial activity was recorded against Gram-negative bacteria, while for the Gram-positive ones, the growth inhibition seems to require a decrease of the cross-linking degree.

Green synthesis of photocatalytic TiO2/Ag nanoparticles for an efficient water remediation

This work reports a green method to produce efficient photocatalytic nanopowders. Titanium dioxide nanoparticles were easily synthetized by an extract of Thymus vulgaris, and then decorated with commercial silver nanoparticles. A detailed morphological, structural, and chemical characterization was performed by scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) adsorption–desorption of N2, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction analysis (XRD), Raman spectroscopy, transmission electron microscopy (TEM), and UV–Vis spectroscopy. The synthetized TiO2 nanoparticles showed a mean size of 10–15 nm, and had the anatase crystallographic phase. The photocatalytic efficiency of the TiO2 nanoparticles was demonstrated by the photo-degradation under UV-light irradiation of different pollutants in aqueous solution (methylene blue, diclofenac, and sodium dodecyl sulfate). TiO2 was coupled to Ag nanoparticles with different percentage in weight (from 0.25 to 3%), to investigate an eventual improvement of its photocatalytic efficiency. The best photocatalytic composite among the tested compositions was the one with the lowest Ag percentage (0.25%). Zebrafish embryo toxicity tests ruled out the toxicity of the synthetized nanoparticles. The present results offer a new, green, and easy method to prepare TiO2/Ag nanoparticles with high photocatalytic efficiency. The proposed materials are therefore promising for applications in photocatalysis, especially for wastewater remediation and reuse.

DEVELOPMENT OF A TOPICAL GEL CONTAINING A DIPEPTIDYL PEPTIDASE-4 INHIBITOR FOR WOUND HEALING APPLICATIONS

Chronic wounds are challenging for healthcare because they are difficult to treat and cannot heal by themselves. Active compounds that can accelerate wound healing are, therefore, necessary. Dipeptidyl peptidase (DPP)-4 inhibitors are antihyperglycemic drugs widely used in patients with type 2 diabetes that not only maintain the homeostasis of blood sugar levels but have also been shown to promote chronic wound healing. In this study, we formulated a topical gel containing, sitagliptin, a commonly used DPP-4 inhibitor drug to treat diabetes, using Carbopol 940 as a base due to its high viscosity and biocompatibility. The characteristics of the sitagliptin gel, including its physical appearance, viscoelastic properties, swelling and degradation, and stability, were investigated. The gel appeared to be transparent with a uniform distribution of drug molecules and was stable at 4 °C for more than 1 month. Moreover, the gel was shown to exhibit shear thinning pseudoplastic behavior, which is desirable for topical gels. The gel could absorb up to 250% of liquid within 2 days but later degraded in aqueous solution following zeroth-order kinetics. In the in vitro release study, the cumulative release data were best fitted with the first order kinetic model, in which the release rate depended on the concentration. To further demonstrate the use of the DPP-4 inhibitor gel, the gel was applied directly onto subcutaneous wounds on experimental pigs. The topical gel was shown to exhibit the desired spread ability without causing any inflammation around the wound area which was comparable to IntraSite® gel and commercial silver nanoparticle cream.

Development of a Topical Gel Containing a Dipeptidyl Peptidase-4 Inhibitor for Wound Healing Applications

Chronic wounds are challenging for healthcare because they are difficult to treat and cannot heal by themselves. Active compounds that can accelerate wound healing are, therefore, necessary. Dipeptidyl peptidase (DPP)-4 inhibitors are antihyperglycemic drugs widely used in patients with type 2 diabetes that not only maintain the homeostasis of blood sugar levels but have also been shown to promote chronic wound healing. In this study, we formulated a topical gel containing, sitagliptin, a commonly used DPP-4 inhibitor drug to treat diabetes, using Carbopol 940 as a base due to its high viscosity and biocompatibility. The characteristics of the sitagliptin gel, including its physical appearance, viscoelastic properties, swelling and degradation, and stability, were investigated. The gel appeared to be transparent with a uniform distribution of drug molecules and was stable at 4 °C for more than 1 month. Moreover, the gel was shown to exhibit shear thinning pseudoplastic behavior, which is desirable for topical gels. The gel could absorb up to 250% of liquid within 2 days but later degraded in aqueous solution following zeroth-order kinetics. In the in vitro release study, the cumulative release data were best fitted with the first order kinetic model, in which the release rate depended on the concentration. To further demonstrate the use of the DPP-4 inhibitor gel, the gel was applied directly onto subcutaneous wounds on experimental pigs. The topical gel was shown to exhibit the desired spread ability without causing any inflammation around the wound area which was comparable to IntraSite® gel and commercial silver nanoparticle cream.

Eco-Friendly Green Synthesis of Rubropunctatin Functionalized Silver Nanoparticles and Evaluation of Antibacterial Activity.

In order to solve the problems of rubropunctatin insoluble in water and its low bioavailability, and explore the synthesis method of green silver nanoparticles, rubropunctatin was used as reducing agent and blocking agent, rubropunctatin-functionalized silver nanoparticles (R-AgNPs) were successfully synthesized. The distinctive absorption peak at 410 nm confirmed the formation of R-AgNPs. Zeta potential measurement showed excellent stability of R-AgNPs with negative values of -29.81 ± 0.37 mV. The results of TEM and XRD showed that the prepared R-AgNPs were round, well dispersed and crystallized with average particle size of 13.54 ± 0.42 nm. FT-IR and XPS studies show that functional groups are involved in R-AgNPs synthesis. The antibacterial activity of R-AgNPs was compared with commercial silver nanoparticles (AgNPs) by microdilution method. The results showed that R-AgNPs (MIC 7.81 μg/mL) has stronger antibacterial activity than commercial AgNPs. The bacteria morphology was observed by the live and dead (SYTO 9/PI) staining assay and SEM showed that the antibacterial effect of R-AgNPs was caused by the destruction of the bacterial cell membrane. Cytotoxicity of rubropunctatin-functionalized silver nanoparticles and commercial silver nanoparticles on mouse fibroblast 3T3 cells was assessed by CCK-8 assay. The results showed that the toxicity of rubropunctatin-functionalized silver nanoparticles to 3T3 cells was lower than that of commercial silver nanoparticles. In summary, synthesis of silver nanoparticles using rubropunctatin is a green synthesis method, and R-AgNPs is a potential antibacterial agent.

Cooperative Antibacterial Enzyme-Ag-Polymer Nanocomposites.

Biomacromolecules such as enzymes and proteins with bactericidal activity are promising for antibacterial applications in a mild, biocompatible, and environmentally friendly manner. However, low bactericidal efficiency has hindered its applications. Nanobiohybrids, constructed from biomacromolecules and functional nanomaterials, could enhance the function of biomacromolecules. However, the incompatibility between biological components and nanomaterials is still the major challenge of designing nanobiohybrids. Here, we rationally design lysozyme-Ag-polymer nanocomposites, which display high stability and antibacterial activity in a cooperative manner. The sufficient presence of Ag-N coordination between Ag and the polymer/protein contributed to the high stability of the nanocomposites. Compared with lysozyme and commercial silver nanoparticles (AgNPs) alone, the enzyme-Ag-polymer nanocomposites showed dramatically enhanced antibacterial activity. We propose a tightly encapsulated invasion (TEI) mechanism for a greatly improved antibacterial activity. The bacteria closely interacted with nanocomposites, and cell walls were hydrolyzed by lysozyme especially, facilitating the penetration of silver into the bacteria, and then reactive oxygen species (ROS) generated by silver to kill bacteria. In addition, the specific TEI mechanism resulted in high biocompatibility toward mammalian cells.

Bio-Fabrication of Euryale ferox (Makhana) Leaf Silver Nanoparticles and Their Antibacterial, Antioxidant and Cytotoxic Potential.

Bio-fabrication of green or plant extract-based silver nanoparticles has garnered much praise over the past decade as the methodology is environment-friendly, undemanding, non-pathogenic, and economical. In the current study, leaves of Eurale ferox (Makhana), considered as waste, were used for the bio-fabrication of silver nanoparticles (ELAgNPs). Various analytical techniques including UV–VIS spectroscopy, Field emission scanning electron microscopy equipped with an energy dispersive X-ray spectrometer (FESEM-EDX), Particle size analyzer (PSA), Fourier transform infra-red spectroscopy (FTIR) and high-resolution transmission electron microscopy (HRTEM) were used for their characterization. Their antibacterial efficacy was examined against gram positive bacterium, Bacillus subtilis and gram negative bacterium, Escherichia coli. The antioxidant potential of the ELAgNPs was compassed by 2, 2 diphenyl-1-picryl hydrazyl (DPPH; λmax = 517 nm) assay, H2O2 (λmax = 230 nm) and OH− (λmax = 520 nm)-based radical scavenging assays. The cytotoxicity was checked against the VERO cell line using 3-[4, 5-dimethyl thiazol-2-yl]-2, 5 diphenyl tetrazolium bromide (MTT) assay. A mean particle size of 26.51 ± 8.87 nm with a size distribution of 7.08–53.94 nm was obtained using HRTEM. The ELAgNPs exhibited dose-dependent antibacterial efficacy with a maximum zone of inhibition (ZOI) of 21.98 ± 0.59 mm against B. subtilis and of 16.46 ± 0.22 mm against E. coli at 500 ppm after 24 h of incubation. The median lethal concentration for the cytotoxicity analysis was found to be 9.54 ± 0.35 ppm, 120.9 ± 6.31 ppm, and 20.74 ± 0.63 ppm for ELAgNPs, commercial silver nanoparticles (CAgNPs), and silver nitrate (SN), respectively. The ordinary one-way ANOVA results exhibited a significant decrease in cell viability after 72 h of incubation at p < 0.05, α = 0.05. In conclusion, the ELAgNPs showed good antibacterial, radical scavenging and dose-dependent cytotoxicity against the VERO cells. Therefore, these could be used for biomedical applications. Phyto-constituents present in the plant not only act as reducing agents but also as stabilizing and coating agents, and the availability of a wide range of metabolites makes the green approach more promising.

Nematicidal Potential of Green Silver Nanoparticles Synthesized Using Aqueous Root Extract of Glycyrrhiza glabra.

Meloidogyne incognita (root-knot nematode) is a devastating soil-borne pathogen which can infect almost all cultivated plants around the globe, expediting huge pecuniary losses. The purpose of current study was to use the aqueous root extract of Glycyrrhiza glabra for synthesizing silver nanoparticles (GRAgNPs) and assess their nematicidal potential against M. incognita by in vitro methods, including hatching inhibition and mortality assays. The active uptake of FITC labeled GRAgNPs by the nematode and their effect on the expression of selected genes involved in oxidative stress and DNA damage repair were also studied. An HRTEM micrograph confirmed their spherical morphology with sizes ranging from 9.61 nm to 34.735 nm. Complete inhibition of egg-hatching was observed after 48 h of treatment with as low as 10.0 ppm of GRAgNPs. In addition, 100% mortality was recorded at the lowest dose of 6.0 ppm, after 12 h of treatment. The LC-50 for GRAgNPs was found to be 0.805 ± 0.177 ppm at p < 0.0001, R2 = 0.9930, and α = 0.05. The expression of targeted genes (skn-1, mev-1, sod-3, dhs-23, cyp-450, xpa, cpr-1, gst-n, and ugt) was significantly enhanced (1.09–2.79 folds), at 1.0 ppm (α = 0.05, 95% CI) GRAgNPs treatment. In conclusion, GRAgNPs performed efficaciously and considerably in contrast to chemical nematicide and commercial silver nanoparticles (CAgNPs) and might be used as a promising alternative as relatively lower concentration and short exposure time were enough to cause higher mortality and nanotoxicity in nematodes.

Comparison and Advanced Antimicrobial Strategies of Silver and Copper Nanodrug-Loaded Glass Ionomer Cement against Dental Caries Microbes.

Caries lesions during cement repairs are a severe issue, and developing a unique antimicrobial restorative biomaterial can help to reduce necrotic lesion recurrence. As a result, Thymus vulgaris extract was used to biosynthesize copper nanoparticles (TVE-CuNPs) exhibiting different characteristics (TVE). Along with TVE-CuNPs, commercial silver nanoparticles (AgNPs) and metronidazole were combined with glass ionomer cement (GIC) to test its antibacterial efficacy and compressive strength. FTIR, XRD, UV-Vis spectrophotometry, and TEM were applied to characterize the TVE-CuNPs. Additionally, AgNPs and TVE-CuNPs were also combined with metronidazole and GIC. The modified GIC samples were divided into six groups, where groups 1 and 2 included conventional GIC and GIC with 1.5% metromidazole, respectively; group 3 had GIC with 0.5% TVE-CuNPs, while group 4 had 0.5% TVE-CuNPs with metronidazole in 1.5%; group 5 had GIC with 0.5% AgNPs, and group 6 had 0.5% AgNPs with metronidazole at 1.5%. An antimicrobial test was performed against Staphylococcus aureus (S. aureus) and Streptococcus mutans (S. mutans) by the disc diffusion method and the modified direct contact test (MDCT). GIC groups 4 and 6 demonstrated a greater antimicrobial efficiency against the two tested strains than the other groups. In GIC groups 4 and 6, the combination of GIC with two antimicrobial agents, 1.5% metronidazole and 0.5% TVE-CuNPs or AgNPs, enhanced the antimicrobial efficiency when compared to that of the other groups with or without a single agent. GIC group specimens combined with nanosilver and nanocopper had similar mean compressive strengths when compared to the other GIC groups. Finally, the better antimicrobial efficacy of GIC boosted by metronidazole and the tested nanoparticles against the tested strains may be relevant for the future creation of more efficient and modified restorations to reduce dental caries lesions.

Effect of cassava starch biofilm with diffusion of silver nanoparticles on the conservation of banana 'prata'

Brazil is now the world's fourth-largest banana producer in the world with an annual production of 6.953,747 tons per year. In Brazil, the banana (Musa spp.) stands out, not only because it is the most widespread, but also because it is the most consumed by all social classes. Cassava is a renewable, almost unlimited resource and one of the most abundant substances in nature. It is one of the most important starchy root crops of the tropics used for food and industrial purposes. The present study aimed to evaluate the use of biofilms based on cassava starch with the diffusion of silver nanoparticles (AgNP) on the conservation of banana 'Prata'. Initially, filmogenic solutions were produced using the casting technique for five treatments. Additionally, transparency, thickness, grammage, and, subsequently, the biofilms were applied in the film-forming solution for 1 min and suspended for further drying at room temperature. After this process, were evaluated the fresh mass loss and total soluble solids. This study revealed the efficiency of cassava starch biofilm with gelatin addition to reduce the enzymatic browning rate and increase the shelf life of bananas (Musa Subgroup Prata). However, no significant results were observed with the addition of commercial silver nanoparticles .

Silver nanoparticles-essential oils combined treatments to enhance the antibacterial and antifungal properties against foodborne pathogens and spoilage microorganisms

Plant-derived essential oils (EOs) and commercial silver nanoparticles (AgNPs) were tested to evaluate their antibacterial and antifungal efficiency against two pathogenic bacteria (Escherichia coli O157:H7 and Salmonella Typhimurium) and three spoilage fungi (Aspergillus niger, Penicillium chrysogenum, and Mucor circinelloides). A broth microdilution assay was used to determine the minimal inhibitory concentration (MIC) of EOs and AgNPs. In the MIC assay, the cinnamon EO, Mediterranean formulation, citrus EO and spherical-shaped silver nanoparticles (AgNPs) (AGC 1, AGC 0.5, AGPP and AGPPH) showed moderate to high antibacterial and antifungal properties, with MIC ranging from 7.8 to 62.5 ppm for AgNPs and 312.5–1250 ppm for EOs against the tested bacteria and fungi. The possible interaction between the EOs and the AgNPs was determined using a checkerboard method by evaluating fractional inhibitory concentration (FIC) values. The combination of two or more EOs and AgNPs (Active combination 1: AGPPH+cinnamon EO, Active combination 2: AGC 0.5+Mediterranean formulation+citrus EO, Active combination 3: AGPP+cinnamon EO+Asian formulation+lavang EO) showed synergistic effects (FIC <1.0) against all tested bacteria and fungi. A modified Gompertz model was used to evaluate growth parameters including maximum colony diameter (A), maximum growth rate (Vm), and lag phase (λ), under the three active combinations suggested by the checkerboard method using a vapor assay. The three active combinations 1, 2 and 3 reduced the growth rate and maximum colony diameter of E. coli, S. Typhimurium, A. niger, P. chrysogenum, and M. circinelloides, and extended their lag phase from 1 to 5 days. In in situ tests with inoculated rice, the three active combinations showed a significant reduction of all tested bacteria and fungi at 27 °C for 28 days.

Hydrogel with silver nanoparticles synthesized by Mimosa tenuiflora for second-degree burns treatment

In this work we use Mimosa tenuiflora (MtE) extracts as reducing agents to synthesize silver nanoparticles (AgMt NPs) which were characterized by DPPH and Total Polyphenols Assays, UV–visible, X-ray diffractometer (XRD), high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS) and Thermogravimetric analysis (TGA). AgMt NPs possess average sizes of 21 nm and fcc crystalline structure, it was also confirmed that the MtE is present in the AgMt NPs even after the cleaning protocol applied. Subsequently, carbopol hydrogels were made and the MtE and the synthesized AgMt NPs were dispersed in different gels (MtE-G and AgMt NPs-G, respectively) at 100 µg/g concentration. The gels were characterized by UV–Vis, IR, and rheology. Antimicrobial tests were performed using Staphylococcus aureus and Escherichia coli. Burn wound healing was evaluated in a second-degree burn injury on a Wistar rats model for 14 days and additional skin biopsies were examined with histopathological analysis. Gel with commercial silver nanoparticles (Ag NPs) was prepared and employed as a control on the biological assays. Hydrogel system containing silver nanoparticles synthesized with Mimosa tenuiflora (AgMt NPs-G) is a promising therapeutic strategy for burn wound healing, this due to bactericidal and anti-inflammatory effects, which promotes a more effective recovery (in percentage terms) by damaged area.

Green synthesis, characterization, antibacterial and biofilm inhibitory activity of silver nanoparticles compared to commercial silver nanoparticles

This study was aimed to fabricate Zataria multiflora-derived silver nanoparticles (AgNPs) and evaluate the antibacterial activity and biofilm inhibitory activity of plant-mediated fabricated AgNPs (P-AgNPs) compared to commercial AgNPs (C-AgNPs) against Staphylococcus aureus ATCC 25923. The P-AgNPs were characterized by using UV–vis spectroscopy, Transmission electron microscopy (TEM), Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), Energy Dispersive X-ray spectroscopy (EDX), Dynamic Light Scattering (DLS), and Fourier Transform Infrared (FT-IR) spectrum. The P-AgNPs were formed fairly uniform in size with a spherical morphology and an average hydrodynamic diameter of 25.5 nm at pH value of 9. Besides, the EDX analysis confirmed the presence of silver ions in the fabricated P-AgNPs. The FT-IR analysis also confirmed the presence of different functional groups on the surface of P-AgNPs. The P-AgNPs and C-AgNPs represented significant antibacterial activity with minimum inhibitory concentration (MIC) of 4 and 8 µg/mL against S. aureus, respectively. Both P-AgNPs and C-AgNPs at the concentrations of 0.5, 1, 2, and 4*MIC caused strong biofilm, weak biofilm, weak biofilm and no biofilm, respectively. Notably, at the concentrations of ≥8 µg/mL, both types of AgNPs exhibited significant biofilm inhibitory activity, whereas at the lower concentrations, the P-AgNPs showed greater biofilm inhibition formed by S. aureus.

Visible light promoted porphyrin-based metal-organic adduct

Supramolecular adducts formed by a commercial porphyrin derivative and silver nanoparticles have been obtained using exclusively light as an external trigger that is able to promote the formation of the plasmonic nanostructures. In particular, a water-soluble porphyrin, i.e. tetrakis(4-carboxyphenyl)porphyrin, has been used. It has been thoroughly characterized by means of UV-vis and fluorescence spectroscopy in order to explain its peculiar behavior when illumined with visible photons. Herein we demonstrate that, by means of light illumination, it is possible to tune the porphyrin aggregation state. Furthermore, when the monomeric form of the organic macrocycle is induced and a controlled amount of AgNO[Formula: see text] is simultaneously dissolved, it is possible to promote the formation of silver nanostructures using visible light. The proposed approach allowed porphyrin derivatives/Ag nanoparticles hybrid nanostructures to be obtained without using a chemical reducing agent: the porphyrin derivative simultaneously acts as reducing agent when irradiated by visible light and as a capping agent for the silver nanostructures. The organic/inorganic adduct was characterized by means of steady-state fluorescence that highlights a strong energetic or electronic communication between the two species. XRD and SEM investigations evidence that silver nanoparticles are formed without using any reducing agent.

In vitro intestinal toxicity of commercially available spray disinfectant products advertised to contain colloidal silver

The use of colloidal silver-containing products as dietary supplements, immune boosters and surface disinfectants has increased in recent years which has elevated the potential for human exposure to silver nanoparticles and ions. Product mislabeling and long-term use of these products may put consumers at risk for adverse health outcomes including argyria. This study assessed several physical and chemical characteristics of five commercial products as well as their cytotoxicity using a rat intestinal epithelial cell (IEC-6) model. Concentrations of silver were determined for both the soluble and particulate fractions of the products. Primary particle size distribution and elemental composition were determined by transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDS), respectively. Hydrodynamic diameters were measured using nanoparticle tracking analysis (NTA) and dynamic light scattering (DLS). The effect of gastrointestinal (GI) simulation on the colloidal silver products was determined using two systems. First, physical and chemical changes of the silver nanoparticles in these products was assessed after exposure to Synthetic Stomach Fluid (SSF) resulting in particle agglomeration, and the appearance of AgCl on the surfaces and between particles. IEC-6 cells were exposed for 24 h to dilutions of the products and assessed for cell viability. The products were also treated with a three-stage simulated GI system (stomach and intestinal fluids) prior to exposure of the IEC-6 cells to the isolated silver nanoparticles. Cell viability was affected by each of the consumer products. Based on the silver nitrate and commercial silver nanoparticle dose response, the cytotoxicity for each of the colloidal silver products was attributed to the particulate silver, soluble silver or non‑silver matrix constituents.

Nebulized jet-based printing of bio-electrical scaffolds for neural tissue engineering: a feasibility study

In this paper we investigate the application of a direct writing technique for printing conductive patterns onto a biocompatible electrospun-pyrolysed carbon-fibre-based substrate. The result is a first study towards the production of bio-electrical scaffolds that could be used to enhance the promotion of efficient connections among neurons for in vitro studies in the field of neural tissue engineering. An electrospinning process is employed for production of the materials derived from the precursor polyacrylonitrile, in which the embedding of carbon nanotubes (CNTs) is also investigated. Subsequently, the methodology of research into suitable parameters for the printed electronics, using a commercial silver nanoparticle (Øavg,particle size ∼ 100 nm) ink, is described. The results show values of 2 Ω cm for the resistivity of the carbon-fibre materials and conductive printed lines of resistance ∼50 Ω on glass and less than ∼140 Ω on carbon-fibre samples. Biocompatibility results demonstrate the possibility of using electrospun-pyrolysed mats, also with embedded CNTs, as potential neural substrates for spatially localized electrical stimulation across a tissue. In addition, the data concerning the potential toxicity of silver suspensions are in accordance with the literature, showing a dose-dependent behaviour. This work is a pioneering feasibility study of the use of the flexible and versatile printed electronic approach, combined with engineered biocompatible substrates, to realize integrated bio-electrical scaffolds for in vitro neural tissue engineering applications.