Commercial Head Research Articles

Evaluation of Commercial Head Cabbage (<i>Brassica oleracea </i>L.) Varieties in Kellem Wollega Zone

Cabbage <i>(Brassica oleraceae</i> var.capitata) is one of the most important leafy vegetables worldwide and is adapted to cool moist conditions. The experiment was conducted at two sub-sites of Haro Sabu Agricultural Research Center from 2020-2024 at Belam FTC and in 2024 at Gute Anani FTC of Kellem Wollega zone, during main cropping season. Six commercial head cabbage were evaluated with objective the objective of selecting and recommending high yielder, disease and insect pest tolerant head cabbage varieties at for potential areas of Kellem Wollega. Analysis of variance(ANOVA revealed that the main effect of variety showed highly significant effect on days to head initiation and significant on plant height, plant spread, head length, average head weight, marketable yield, total yield and disease reaction. Similarly the main effect of environment showed highly significance on all recorded parameters. The highest (26.4tha<sup>-1</sup>) and the lowest (20tha<sup>-1</sup>) marketable yield were recorded from Bakker and Delta varieties. Hence Bakker and Olter varieties were recommended for the yield increment of head cabbage in the studied areas of Western Oromia.

Growth and Yield of Lettuce (Lactuca sativa var. crispa) in Varying Irrigation Water Salinity and Leaching Fractions

This study aimed to determine the response of yield and yield parameters of the ‘Cospirina’ lettuce plant, known to be moderate salinity tolerant, to different levels of salt water applications and different leaching rates in the Eastern Mediterranean Region of Hatay Province, Türkiye. Lettuce was irrigated at three different irrigation water salinity levels (EC0 = 0.5 dS m-1-control, EC2 = 2 dS m-1, EC4 = 4 dS m-1) and four different leaching fractions (LF0 = 0%, LF1 = 10%, LF2 = 20%, LF3 = 30%). Irrigation water salinity was adjusted by adding different amounts of NaCl salt to the tap water (EC0, control) with an EC value of 0.5 dS m-1. Plant water consumption (PWC) increased as the leaching fraction increased but decreased as salinity increased. PWC ranged from 7.32 – 10.5 L for EC0, 7.0 – 8.46 L for EC2, and 5.0 – 6.46 L for EC4. The mean water use efficiency (WUEy) was calculated as 31.43 g L-1, 32.12 g L-1, and 34.77 g L-1 in EC0, EC2, and EC4, respectively. Lettuce yield decreased with increasing soil salinity and the leaching fraction. Yield ranged from 182 g plant-1 (EC4LF0) to 282 g plant-1 (EC0LF2). When soil salinity increased from 0.82 dS m-1 (EC0) to 1.31 dS m-1 (EC2) and 2.09 dS m-1 (EC4), yields decreased by 10% and 28%, respectively. Increasing salinity significantly decreased the root length, root width, leaf number, number of commercial leaves, leaf width, leaf length, and biomass, while commercial head length and commercial head diameter remained unaffected.

Development of a Filtimator for Pediatric Image-Guided Radiation Therapy with Low Imaging Dose

We propose to use the filtimator (a filter and a collimator) for CBCT-based image-guided radiation therapy (IGRT) optimized for pediatric patients to minimize the imaging dose but not to sacrifice the imaging quality required for bony-based image fusion. The filtimator was made of Tin (0.6 - 1 mm) and Cu sheets (0.6 to 1.2mm) for filter and collimation with adjustable collimation with 4 to 6 cm fields at the isocenter. The thickness of the filter in the central and the peripheral regions were determined using vendor-provided image registration software and to ensure that the rigid image registration results from the CBCT were with and without the filtimator. The image quality of the filtered CBCT was compared with the regular CBCTs. Image registration accuracy was investigated by creating a < 2° shift in pitch, roll, and rotation and < 3 cm shifts in the lateral, vertical, and longitudinal directions, using commercial head and house-made phantoms. The imaging dose reduction factor of the filtimator was measured using a CT dose index phantom. The contrast-to-noise ratio substantially improved in the opening region of the filter, which provided better visualization of normal anatomy and target volumes. The slim filter reduced the imaging dose by > 98% in the filtered region, and the visualization of bony structures was well preserved, allowing for accurate rigid image registration with the filter. The imaging registration difference was < 0.2° shift in pitch, roll, and rotation and < 0.5 mm shift in the lateral, vertical, and longitudinal directions compared to the regular CBCT. The proposed dose reduction with the filtimator was demonstrated to be efficient and effective in considerably reducing the patient imaging dose while yielding accurate registration results. This novel technique can become a valuable tool for generating 3- and 4-dimensional images with a much-reduced dose to improve the precision of target localization in radiation therapy.

A novel whole-head RF coil design tailored for concurrent multichannel brain stimulation and imaging at 3T

PurposeMultichannel Transcranial Magnetic Stimulation (mTMS) [1] is a novel non-invasive brain stimulation technique allowing multiple sites to be stimulated simultaneously or sequentially under electronic control without movement of the coils. To enable simultaneous mTMS and MR imaging, we have designed and constructed a whole-head 28-channel receive-only RF coil at 3T. MethodsA helmet-shaped structure was designed considering a specific layout for a mTMS system with holes for positioning the TMS units next to the scalp. Diameter of the TMS units defined the diameter of RF loops. The placement of the preamplifiers was designed to minimize possible interactions and to allow straightforward positioning of the mTMS units around the RF coil. Interactions between TMS-MRI were analyzed for the whole-head system extending the results presented in previous publications [2]. Both SNR- and g-factors maps were obtained to compare the imaging performance of the coil with commercial head coils. ResultsSensitivity losses for the RF elements containing TMS units show a well-defined spatial pattern. Simulations indicate that the losses are predominantly caused by eddy currents on the coil wire windings. The average SNR performance of the TMSMR 28-channel coil is about 66% and 86% of the SNR of the 32/20-channel head coil respectively. The g-factor values of the TMSMR 28-channel coil are similar to the 32-channel coil and significantly better than the 20-channel coil. ConclusionWe present the TMSMR 28-channel coil, a head RF coil array to be integrated with a multichannel 3-axisTMS coil system, a novel tool that will enable causal mapping of human brain function.

Dipolectric antenna for high-field MRI.

To introduce the dipolectric antenna: a novel RF coil design for high-field MRI using a combination of a dipole antenna with a loop-coupled dielectric resonator antenna. Simulations in human voxel model Duke involving 8-, 16-, and 38-channel dipolectric antenna arrays for brain MRI were conducted. An 8-channel dipolectric antenna for occipital lobe MRI at 7 T was designed and constructed. The array was built of four dielectric resonator antennas (dielectric constant = 1070) and four segmented dipole antennas. In vivo MRI experiments were conducted in one subject, and the SNR performance was benchmarked against a commercial 32-channel head coil. A 38-channel dipolectric antenna array provided the highest whole-brain SNR (up to a 2.3-fold SNR gain in the center of the Duke's head vs. an 8-channel dipolectric antenna array). Dipolectric antenna arrays driven in dipole-only mode (with dielectric resonators used as receive-only) yielded the highest transmit performance. The constructed 8-channel dipolectric antenna array provided up to threefold higher in vivo peripheral SNR when compared with a 32-channel commercial head coil. Dipolectric antenna can be considered a promising approach to enhance SNR in human brain MRI at 7 T. This strategy can be used to develop novel multi-channel arrays for different high-field MRI applications.

An RF coil design to enable quintuple nuclear whole-brain MRI.

To bring metabolic imaging based on multi-NMR toward practical use from the RF hardware perspective. A highly integrated RF coil is designed for whole-brain MRI and MRS targeted to five nuclear species: 1 H, 19 F, 31 P, 23 Na, and 13 C. Dipole antennas and closely loaded local receiver loops are combined in this setup. High-quality in vivo scan results of 1 H, 31 P, 23 Na, and 13 C on healthy volunteers have been achieved. For 1 H, the transmit efficiency is 77% of a single-tuned commercial head coil (NOVA 8-transmit [Tx]/32-receive [Rx]; NOVA Medical, Wilmington, MA, USA). For 31 P, 110% SNR of a dual-tuned close-fit head-birdcage was achieved at the center of the subject, based on MR experiments on a phantom. For 31 P, 23 Na, and 13 C, bench measurements indicate SNR loss of 15%, 27%, and 30% compared with single-tuned conditions. 19 F performance has been proven to be similar to that of 1 H through bench tests and electromagnetic simulations. With this device, 1 H-based anatomic images that are expected to meet clinical requirements, as well as high-quality multi-NMR images and spectra, can be acquired within one scan session without hardware replacement or patient repositioning, enabling morphologic and metabolic MRI within acceptable scan time.

Improving detection of fMRI activation at 1.5 T using high permittivity ceramics

In this work, we propose an application of high permittivity materials (HPMs) to improve functional magnetic resonance imaging (fMRI) at 1.5 T, increasing the receive (Rx) sensitivity of a commercial multi-channel head coil. To evaluate the transmit efficiency, specific absorption rate (SAR), and the signal-to-noise ratio (SNR) changes introduced by the HPMs with relative permittivity of 4500, we considered the following configurations in simulation: a whole-body birdcage coil and an Rx-only multi-channel head coil with and without the HPM blocks in the presence of a homogeneous head phantom or a human body model. Experimental studies were also performed with a phantom and with volunteers. Seven healthy volunteers enrolled in a prospective study of fMRI activation in the motor cortex with and without HPMs. fMRI data were analyzed using group-level paired T-tests between acquisitions with and without HPM blocks. Both electromagnetic simulations and experimental measurements showed ∼25% improvement in the Rx sensitivity of a commercial head coil in the areas of interest when HPM blocks were placed in close proximity. It increased the detected motor cortex fMRI activation volume by an average of 56%, thus resulting in more sensitive functional imaging at 1.5 T.

Double-row dipole/loop combined array for human whole brain imaging at 7T.

Important issues in designing radiofrequency (RF) coils for human head imaging at ultra-high field (UHF; ≥7T) are the inhomogeneity and longitudinal coverage (along the magnet axis) of the transmit (Tx) RF field. Both the homogeneity and coverage produced by Tx volume coils can be improved by means of three-dimensional (3D) RF shimming, which requires the use of multirow Tx-arrays. In addition, according to recent findings of the ultimate intrinsic signal-to-noise ratio (UISNR) theory, the loop-only receive (Rx) arrays do not provide optimal SNR near the brain center at UHF. The latter can be obtained by combining complementary conductive structures carrying different current patterns (e.g., loops and dipole antennas). In this work, we developed, constructed, and evaluated a novel 32-element hybrid array design for human head imaging at 7T. The array consists of 16 transceiver loops placed in two rows circumscribing the head and 16 folded-end Rx-only dipoles positioned in the centers of loops. By placing all elements in a single layer, we increased RF power deposition into the tissue and, thus, preserved the Tx-efficiency. Using this hybrid design also simplifies the coil structure by minimizing the total number of array elements. The array demonstrated whole brain coverage, 3D RF shimming capability, and high SNR. It provided ~15% higher SNR near the brain center and, depending on the RF shim mode, from 20% to 40% higher Tx-efficiency than a common commercial head array coil.

ТВЕРДОТЕЛЬНЫЙ ЛАЗЕР ДЛЯ НАУЧНЫХ ИССЛЕДОВАНИЙ С КОРРЕКЦИЕЙ ТЕПЛОВОЙ ЛИНЗЫ В РЕЗОНАТОРЕ. I. РЕЗУЛЬТАТЫ ЭКСПЕРИМЕНТОВ

The most important parameters of a solid state laser for scientific and technological applications are the high brightness and small angular divergence of the output emission. This series of two papers highlights the method of numerical optimization of the laser resonator based on a commercial head with compensation of the induced thermal lens. Experimental verification of the method was carried out. In a 1500 mm long resonator, compensation is achieved by inserting negative and positive correcting lenses into the resonator, resulting in output emission in the form of a Gaussian beam with a small angular divergence, suitable for scientific research.

ТВЕРДОТЕЛЬНЫЙ ЛАЗЕР ДЛЯ НАУЧНЫХ ИССЛЕДОВАНИЙ С КОРРЕКЦИЕЙ ТЕПЛОВОЙ ЛИНЗЫ В РЕЗОНАТОРЕ. II. МЕТОДИКА И РЕЗУЛЬТАТЫ ЧИСЛЕННЫХ РАСЧЕТОВ

The most important parameters of a solid state laser for scientific and technological applications are the high brightness and small angular divergence of the output radiation. This series of two papers concerns the method of numerical optimization of the laser resonator based on a commercial head with compensation of the induced internal thermal lens. Experimentation is also used to verify optimization. The method uses quasigeometrical optics to calculate focal lenghts of correcting lenses and their position in the resonator based on the measured parameters of the thermal lens and the required parameters of the output laser beam, with subsequent diffraction refining.

A Miniature Flexible Coil for High-SNR MRI of the Pituitary Gland

Clinical magnetic resonance imaging (MRI) of the pituitary gland sometimes fails to detect small pituitary tumors due to limited signal-to-noise ratio (SNR) and spatial resolution. Thus, neurosurgeons may need to resort to surgical exploration and systematic slicing of the pituitary gland to identify the small pituitary tumors. In this work, we designed a single-loop miniature flexible coil that can be surgically positioned millimeters from the pituitary gland, enabling high-SNR pituitary MRI. We investigated the spatial distributions of the image SNR of the miniature coil, via both numerical simulation and phantom experiments. We also explored the feasibility of increased SNR within the pituitary gland based on simulated surgical placements. Compared to the commercial head coil, our miniature coil achieved up to a 19-fold SNR improvement within the region of interest, and the simulation and phantom experiment reached a good agreement, with an error of 1.1% ± 0.8%. High resolution MRI scans further demonstrated the visual improvement of the miniature coil against the commercial head coil. The cross-validation of the simulation and the phantom experiment showed the potential of using the numerical simulation model to accelerate the coil design prototyping and iteration and to optimize coil design in the future.

Development and production of iceberg lettuce irrigated with magnetically treated water

Irrigated agriculture has become a concern, given the scarcity of freshwater. To reduce its water consumption, new techniques and technologies have been proposed. Based on this, the objective of this work was to evaluate the influence of different soil water tensions at initiation of irrigation with magnetically treated water, on ‘iceberg’ lettuce Lucy Brown (Lactuca Sativa L.) development and production. The experiment was conducted in a greenhouse, using a completely randomized factorial design, to evaluate two water types (magnetically treated water – MW and ordinary water – OW) and four soil water tensions at initiation of irrigation (T1 – 15 kPa, T2 – 25 kPa, T3 – 40 kPa and T4 – 70 kPa), with three replicates. Tensiometers were used to estimate soil water tension. The evaluated parameters were: aerial part fresh and dry total mass; commercial head fresh and dry mass, root fresh and dry mass; stem fresh and dry mass; stem length and diameter; percentage of leaves with tip burn, total and commercial yield; water use efficiency related to total and commercial yield; plant exposed area; and dry matter content. Despite achieving greater water use efficiency, the magnetic treatment may have hindered the removal of water from the soil by the crop, especially at increased soil water tension at initiation of irrigation.

A Nested Eight-Channel Transmit Array With Open-Face Concept for Human Brain Imaging at 7 Tesla

Purpose: Parallel transmit technology for MRI at 7 tesla will significantly benefit from high performance transmit arrays that offer high transmit efficiency and low mutual coupling between the individual array elements. A novel dual-mode transmit array with nested array elements has been developed to support imaging the human brain in both the single-channel (sTx) and parallel-transmit (pTx) excitation modes of a 7 tesla MRI scanner. In this work, the design, implementation, validation, specific absorption rate (SAR) management, and performance of the head coil is presented.Methods: The transmit array consisted of a nested arrangement to improve decoupling between the second-neighboring elements. Two large cut-outs were introduced in the RF shield for an open-face design to reduce claustrophobia and to allow patient monitoring. A hardware interface allows the coil to be used in both the sTx and pTx modes. SAR monitoring is done with virtual observation points (VOP) derived from human body models. The transmit efficiency and coverage is compared with the commercial single-channel and parallel-transmit head coils.Results: Decoupling inductors between the second-neighboring coil elements reduced the coupling to less than −20 dB. Local SAR estimates from the electromagnetic (EM) simulations were always less than the EM-based VOPs, which in turn were always less than scanner predictions and measurements for static and dynamic pTx waveforms. In sTx mode, we demonstrate improved coverage of the brain compared to the commercial sTx coil. The transmit efficiency is within 10% of the commercial pTx coil despite the two large cut-outs in the RF shield. In pTx mode, improved signal homogeneity was shown when the Universal Pulse was used for acquisition in vivo.Conclusion: A novel head coil which includes a nested eight-channel transmit array has been presented. The large cut-outs improve patient monitoring and reduce claustrophobia. For pTx mode, the EM simulation and VOP-based SAR management provided greater flexibility to apply pTx methods without the limitations of SAR constraints. For scanning in vivo, the coil was shown to provide an improved coverage in sTx mode compared to a standard commercial head coil.

Impact Device for Biomechanics of Human Head-Neck Injuries

This paper describes experimental tests in LARM2 in Rome to analyze impacts on a human head. The tests consist of performing three different types of impact by hitting a commercial head mannequin with a rigid object. Inertial Measurement Unit (IMU) sensors and force sensors measure each impact’s effect and evaluate the results. The sensors are located on suitable head points to monitor force, acceleration, and angular displacement on small and large lateral impact and top impact events. Results of tests are discussed to investigate and characterize the biomechanics in human head impacts. Considerations from results are used to formulate a new criterion for head-neck injury by impacts.

GYPSUM AND POTASSIUM DOSES ON CAULIFLOWER NUTRITIONAL STATUS AND PRODUCTION

ABSTRACT Gypsum is widely used in agriculture to supply nutrients to the soil-plant system. However, the excessive use of gypsum may lead to a reduction of cationic soil nutrients such as potassium in the most superficial soil layer. Thus, the objective of this study was to evaluate the feasibility of using gypsum and potassium for cauliflower crop nutritional status and commercial production. The experiment was conducted in 5×5 factorial scheme, corresponding to five K doses (0, 100, 180, 240, 360 kg ha−1 of K2O) and five gypsum doses (0, 500, 1000, 2000, 4000 kg ha−1) in dystrophic Red Latosol. Leaf N, P, K, Ca, Mg, S, B, Cu, Fe, Mn and Zn contents, commercial head mass, diameter and height and peduncle diameter were evaluated. The application of 360 kg ha−1 of K2O resulted in 29.69% more K in cauliflower leaf and 18.94% more commercial head mass compared to the non-application of K. The application of 4000 kg ha−1 of gypsum resulted in reductions of leaf S and Mn and increase in leaf Cu. Based on the results observed, 4000 kg ha−1 of gypsum and 360 kg ha−1 K2O could be required for high cauliflower production.

Robust RF shimming and small-tip-angle multispoke pulse design with finite-difference regularization.

A new regularizer is proposed for the magnitude least-squares optimization algorithm, to ensure robust parallel transmit RF shimming and small-tip-angle multispoke pulse designs for ultrahigh-field MRI. A finite-difference regularization term is activated as an additional regularizer in the iterative magnitude-least-squares based pulse design algorithm when an unwanted flip angle null distribution is detected. Both simulated and experimental maps from different transmit arrays and different human subjects at 7 T were used to evaluate the proposed algorithm. The algorithm was further demonstrated in experiment with dynamic multislice RF shimming for a single-shot gradient-echo EPI for human functional MRI at 7 T. The proposed finite-difference regularizer effectively prevented excitation null to be formed for RF shimming and small-tip-angle multispoke pulses, and improved the latter with a monotonic trade-off relationship between flip angle error and RF power. The proposed algorithm was demonstrated to be effective with several head-array geometries by simulation and with a commercial head array with 12 healthy human subjects by experiment. During a functional MRI scan at 7 T with dynamic RF shimming, the proposed algorithm ensured high image SNR throughout the human brain, compared with near-complete local signal loss by the conventional magnitude-least-squares algorithm. Using finite-difference regularization to avoid unwanted solutions, the robustness of RF shimming and small-tip-angle multispoke pulse design algorithms are improved, with better flip angle homogeneity and a monotonic trade-off relationship between flip angle error and RF power.

Soil mulch in control of soil temperature and incidence of weeds in the production of crisphead lettuce

It was evaluated the effects of different types of mulching of soil in the cultivation of crisphead lettuce (Lactuca sativa L.), cultivar “Lucy Brown”, in the spring period, on weed control, soil temperature and productivity. The experiment was arranged in a randomized block design with four treatments and five replications in plots of 14.0m2. The following coverages were studied: Pennisetum glaucum L., Avena strigosa, Brachiaria ruziziensis, plus the control treatment (soil without mulching). The use of mulching of soil, P. glaucum and B. ruziziensis, proved to be a beneficial practice, reducing the soil temperature by up to 5ºC. There was a lower incidence of weeds with the use of the P. glaucum and A. strigosa coverages. The use of mulch did not provide a significant gain in productivity, however, there was a gain regarding the quality of the product, since the coverage with P. glaucum provided an increase in the size of the head (fresh mass of the commercial head).

Bokashi compost and biofertilizer increase lettuce agronomic variables in protected cultivation and indicates substrate microbiological changes

The aim of the study was to evaluate agronomic productive variables of iceberg lettuce and soil microbiological variables for two crop cycles by using organic inputs. The treatments were as follows: control (no fertilization); Bokashi compost (20 g per plant); Penergetic-k plus Penergetic-p bio-activators (both at 1.5 g per litre of water, applied to the substrate and plant, respectively); and biofertilizer at different concentrations (2.5, 5.0, 7.5, and 10% dilutions in water). Biofertilizer concentrations were applied during five fertigation times per day in the first crop experiment and in single daily fertigation in the second crop experiment. Agronomic productive variables evaluated were: total mass, commercial mass, discarded leaves mass, stem diameter, commercial head diameter and plant height. Soil microbial biomass carbon, basal soil respiration and metabolic quotient were evaluated for substrate microbial quality measurement. In the first cycle, plants treated with Bokashi or Penergetic presented superior total mass, commercial mass and commercial head diameter of lettuce, while plants treated with biofertilizer did not exhibit improvement and presented tipburn in some plants, when compared to control. In the second cycle, the use of Bokashi and biofertilizers improved the total mass and commercial head diameter, compared to control. Higher than control microbial biomass was achieved with biofertilizer concentrations and Bokashi. Lower metabolic quotient (qCO2) was observed for all the treatments, when compared to control. Soil microbial quality data corresponded to better lettuce yields.

Ficoll as testing material for diffusion weighted imaging-quality assurance phantoms

PurposeThe aim of this work is to test the use of aqueous solutions of Ficoll®**, a highly branched polymer displaying crowding properties, to build a phantom suitable for Diffusion Weighted Imaging (DWI) in Magnetic Resonance Imaging (MRI). MethodsWe developed a test object made of a cylindrical plastic container with a precise geometrical arrangement suitable for measuring several samples at the same time. The container was designed to host single vials with variable geometry and number, and to fit inside common commercial head coils for MRI scanners.In our experiments, vials were filled with 8 aqueous solutions of Ficoll 70 and Ficoll 400 spanning a range of polymer concentration from 5 to 30% by weight. Vials containing ultra-pure water were also used as reference. Experiments were performed on both 1.5 and 3 T clinical scanners (GE, Philips and Siemens), under the conditions of a standard clinical examination. ResultsThe geometry of the phantom provided reduced imaging artifacts, especially image distortions at magnetic interfaces. We found that the Apparent Diffusion Coefficient (ADC) varied in the range of 0.00125–0.00223 mm2/s and decreased with Ficoll concentration. ADC vs Ficoll concentration exhibited a linear trend. Results were consistent over time and among different MRI clinical scanners, showing an average variability of 3% at 1.5 T and of 7.5% at 3 T. Moreover, no substantial difference was found between Ficoll 70 and 400. By varying Ficoll concentration, ADC can be modulated to approach tissue-mimicking values. Preliminary results for relaxation measurements proved that both T1 and T2 decreased with Ficoll concentration in the ranges 1.3–2.4 s and 150–800 ms respectively. ConclusionsIn this work, we propose a 3D phantom design based on the widespread crowding agent Ficoll, which is suitable for DWI quality assurance purposes in MRI acquisitions. Aqueous Ficoll solutions provide good performance in terms of stability, ease of preparation, and safety.

Virtual Reality as a Portable Alternative to Chromotherapy Rooms for Stress Relief: A Preliminary Study.

Chromotherapy rooms are comfortable spaces, used in places like special needs schools, where stimuli are carefully selected to cope with stress. However, these rooms are expensive and require a space that cannot be reutilized. In this article, we propose the use of virtual reality (VR) as an inexpensive and portable alternative to chromotherapy rooms for stress relief. We recreated a chromotherapy room stress relief program using a commercial head mounted display (HD). We assessed the stress level of two groups (test and control) through an EEG biomarker, the relative gamma, while they experienced a relaxation session. First, participants were stressed using the Montreal imaging stress task (MIST). Then, for relaxing, the control group utilized a chromotherapy room while the test group used virtual reality. We performed a hypothesis test to compare the self- perceived stress level at different stages of the experiment and it yielded no significant differences in reducing stress for both groups, during relaxing (p-value: 0.8379, α = 0.05) or any other block. Furthermore, according to participant surveys, the use of virtual reality was deemed immersive, comfortable and pleasant (3.9 out of 5). Our preliminary results validate our approach as an inexpensive and portable alternative to chromotherapy rooms for stress relief.