Commercial C18 Research Articles

Extraction of estrogenic hormones in wastewater samples by using rotating disk and modified clays with ionic liquids

Both synthetic and natural hormones—17α-ethinylestradiol (EE2), 17β-estradiol (E2), and estriol (E3)—are present in wastewater samples in concentrations typically expressed in ng L-1. These concentrations are significant, as the presence of such hormones in water sources poses risks to both living organisms and the environment. Steroidal hormones from human sources are categorized as emerging pollutants and endocrine-disrupting compounds (EDCs), which constitute a health hazard.In this study, the Rotating Disk Sorption Extraction (RDSE) method was used with modified clays incorporating ionic liquids to detect estrogenic hormones in hospital wastewater treatment plant (HWWTP) samples. Sodium montmorillonite was modified to enhance its extractive capacity by intercalating ionic liquids ([C16MIM+][anion-], where anion = Br-, OH-, or BF4-) between its interlayers. Following extraction, the concentrated analytes were measured using liquid chromatography coupled with photodiode array detection (HPLC-PDA). The method achieved absolute recoveries of 61% for EE2, 41% for E2, and 20% for E3; these recoveries were lower than those obtained with a commercial C18 sorbent. However, the technique achieved enrichment factors of 13, 23, and 32 for E3, EE2, and E2, respectively. In wastewater, the intra-disk reproducibility (RSD) was below 12%. The method also provided limits of detection and quantification in HWWTP samples of 0.18–0.42 ng mL-1 for E3, 0.15–0.37 ng mL-1 for E2, and 0.07–0.16 ng mL-1 for EE2 when using the modified adsorbents. Average concentrations in hospital wastewater were measured at 4.30, 3.85, and 7.23 ng mL-1 in the influent (before treatment) and 3.81, 1.33, and 4.00 ng mL-1 in the effluent (after treatment) for E3, E2, and EE2, respectively.

Deep eutectic supramolecular polymers based HPLC stationary phase: Green synthesis strategy and promising application prospects

BackgroundDeep eutectic solvents (DESs) have been widely and significantly applied in various fields due to their outstanding features such as low cost, easy preparation and good biodegradability. As novel derivatives of DESs, deep eutectic supramolecular polymers (DESPs) combine the macroscopic state of DESs with the covalent interactions of supramolecular polymers, which also possess the properties of DESs as multifunctional materials. Therefore, DESPs are believed to be promising candidates for separation science. However, there are no studies on the application of DESPs as stationary phases for HPLC analysis. ResultsIn this work, a novel DESP based HPLC stationary phase (Poly(DES)@SiO2) was developed for the first time through a green synthesis method by using DES as the polymerization monomer as well as the reaction medium. The results manifest that this novel Poly(DES)@SiO2 column can well interact with analytes through various mechanisms, and realize selective separation of a wide range of structurally similar hydrophilic/hydrophobic substances. More importantly, the separation of hydrophobic analytes on the Poly(DES)@SiO2 column is less time-consuming with fewer organic eluent, although the column efficiency is slightly lower than that of commercial C18 column. Furthermore, the Poly(DES)@SiO2 column exhibits excellent mechanical stability and satisfactory separation repeatability for steroid hormones. Therefore, a reliable method was established for detecting steroid hormones in actual samples with the recoveries ranging from 94.56 % to 103.84 %, which can meet the detection needs of commonly seen steroid hormones in food and the environment. SignificanceIn summary, this work provides some valuable theoretical references for the synthesis of new DESP based stationary phases through a green and facile strategy, and meanwhile, verifies the feasibility of DESP for effective HPLC separations. In addition, the promising application prospect of DESP based stationary phases in the analysis of complex samples has also been demonstrated, expanding the potential application of DES in separation science.

Per aqueous liquid chromatography of Radix hedysari polysaccharides and Au nanoparticles co-functionalized stationary phase and its application in the determination of iridoids and phenylethanols

BackgroundHydrophilic Interaction Liquid Chromatography (HILIC) is an outstanding strategy for the challenging analysis of hydrophilic and polar components. Nevertheless, analysis under HILIC mode typically consumes 70%–95 % acetonitrile with the disadvantage of high analytical costs, being environmentally unfriendly and causing biohazards, which is not in line with the concept of green chromatography. Research has shown that Per Aqueous Liquid Chromatography (PALC) simultaneously emphasizes efficient analytical performance for hydrophilic analytes and green analytical concepts. The development of new PALC stationary phases with superior performance is necessary. ResultsIn this paper, silanized silica was sequentially subjected to esterification reaction, polymerization reaction and covalent bonding through five steps to obtain SiO2-RHP-AuNPs material, which was prepared as a novel stationary phase for PALC. Comprehensive characterization of the materials by means of Fourier transform infrared spectroscopy, Transmission scanning electron microscope, Elemental analysis and Thermogravimetric analysis showed the successful bonding of the functionalized groups on the original silica. The polymeric stationary phase based on Radix hedysari polysaccharide and Au nanoparticles had higher density of hydroxyl and ester functionalized groups. The Au nanoparticles upgraded their mesoporous structure and thermal stability, providing exceptional chromatographic performance and selectivity for chromatographic analysis. The influence of mobile phase water content, salt concentration, pH and column temperature on the retention behavior was evaluated. The novel Column was found to exhibit a dual mechanism of hydrophobic interactions/ion exchange interactions in a mobile phase with high water content. Significance and noveltyThe separation efficiency and selectivity of SiO2-RHP-AuNPs columns for synthetic pigments and organic acids in PALC mode were superior to those of commercial HILIC and C18 columns. In addition, a method for the determination of seven active ingredients in Fructus Ligustri Lucidi by SiO2-RHP-AuNPs column in PALC mode was developed. The method had good stability, reproducibility and accuracy, which was capable of realizing the quality evaluation of Chinese Materia Medicas.

Preparation of sp2c-COF functionalized silica gel material as chromatographic stationary phases for their high-resolution separation of geometric isomers

Exploration and development of novel chromatographic stationary phases is an effective way to improve the separation efficiency of geometric isomers with similar physicochemical properties. Covalent organic frameworks (COFs) are a new class of porous organic polymers that show a wide range of applications in the field of separation science due to their tunable geometries and functionalities, infinitely extended network structures, and abundant interaction sites. However, the common imine-bonded COFs are poorly resistant to hydrolysis in HPLC. In this work, 2,4,6-trimethyl-1,3,5-triazine (TMT) and 1,3,5-tris (4-formylphenyl) triazine (TFPT) were used as raw materials, a sp2 carbon-conjugated covalent organic framework (sp2c-COF) was synthesized through self-assembly monolayer-assisted surface-initiated Schiff-base-mediated hydroxyl-aldehyde condensation reaction, and loaded on the surface of silica substrate with a CN bond to obtain a new segregated material (SiO2@sp2c-COF). SiO2@sp2c-COF was used as a high-performance liquid chromatography (HPLC) packing material for the separation of geometric isomers. Benefitting from its superb in-plane π-conjugation, highly ordered and robust framework structure, high chemical and thermal stability of sp2c-COF, and the unique hydrophilic covalent triazine groups, hydrophobic benzene rings and other groups that can provide a variety of interactions such as hydrophobicity, π-π stacking, hydrogen bonding and hydrophilicity of the prepared SiO2@sp2c-COF stationary phases, they exhibit excellent molecular shape selectivity and resolution in separating geometrical isomers. These geometric isomers include isomers such as polycyclic aromatic hydrocarbons (PAHs), tocopherols, carotenoids, diethylstilbestrol, 1,4-cyclohexanediol and astaxanthin. Compared to commercial C18 columns, this column has more flexible selectivity and higher separation performance. In addition, due to the introduction of hydrophobicity, π-π stacking action and hydrophilic triazine components, the SiO2@sp2c-COF stationary phase also has RPLC/HILIC mixed mode characteristics. Baseline separations of monosubstituted benzenes, alkylbenzenes, positional isomers, sulfonamides, benzoic acid, anilines, nucleosides and nucleobases compounds were achieved on SiO2@sp2c-COF packed columns. This successful application highlights the great potential of sp2c-COF for the separation of geometrical isomers, and provides a way to overcome the stability of common imine-bonded COFs materials in HPLC, as well as to compensate for the shortcomings and deficiencies of a single chromatographic mode in the separation of complex samples. Furthermore, this is the first report of a practical separation of important geometrical isomers using sp2c-COF materials.

Novel phenazine-based microporous organic network for selective and sensitive determination of trace sulfonamides in milk samples

BackgroundSulfonamide (SA) residues in food of animal origin possess a potential threat to human health and environment. However, due to the polar and ionic characteristics and trace level of SAs and the complexity of food matrices, direct measurement of SAs in these samples is still very difficult. Development of efficient sample pretreatment method for sensitive and selective extraction of trace SAs is of great significance and urgently desired. Therefore, rational design and synthesizing advanced and selective extractants is quite important. ResultsIn this work, a novel phenazine-based microporous organic network (MON) named TEPM-DP is reasonably synthesized and employed as a packing material for selective solid phase extraction (SPE) and sensitive determination of four typical SAs in milk samples. Phenazine-based monomer with aromatic and heteroaromatic ring and numerous N atoms is chosen to construct TEPM-DP adsorbent to provide π-π, hydrogen bonding, hydrophobic, and electrostatic extraction sites for SAs. The proposed method owns wide linear ranges, low limits of detection, high enrichment factors, and good precisions and recoveries for SAs in complex milk samples. The recoveries of SAs on TEPM-DP are much higher than those of commercial C18 and activated carbon. The extraction mechanisms are also elucidated via FT-IR, XPS, and comparative experiments. SignificanceThis work reports the first example of design and synthesizing phenazine-based MON in SPE via a simple and rapid solvothermal method. The results reveal the great prospects of TEPM-DP for enriching polar and ionic SAs in complex samples and uncover the potency of phenazine-based MON in sample pretreatment, which will promote the development of MON.

Preparation of two amphiphilic dendritic small molecule gelators based on poly (aryl ether) modified silica-based chromatographic stationary phases and molecular shape recognition for shape-restricted isomers

Geometric isomers tend to have similar polarities and differ only in molecular shape. Vigorously developing new stationary phases to meet the requirements for the separation of isomers that have similar physicochemical properties is still an urgent topic in separation science. Poly (arylene ether)-based dendrimers are known for their multifunctional branched peripheral structures and high self-assembly properties. In this paper, two amphiphilic dendritic organic small molecule gelling agents based on poly (aryl ether), PAE-ANT and PAE-PA, were prepared and conjugated to the silica surface. SiO2@PAE-ANT and SiO2@PAE-PA were used as HPLC stationary phases for the separation of non-polar shape-restricted isomers. Both stationary phases have very high molecular shape selectivity for isomers such as polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), tocopherols and carotenoids. Separation of cis-trans geometric isomers such as diethylstilbestrol and polar compounds such as monosubstituted benzenes and anilines can also be achieved. These two columns offer more flexible selectivity and higher separation performance than commercial C18 and phenyl columns. There is a difference in molecular shape selectivity between the two stationary phases for the same analyte test probes. SiO2@PAE-ANT showed slightly better linear selectivity for non-polar shape-restricted isomers compared to SiO2@PAE-PA with Janus-type PAE-PA bonding phase. This separation behavior may be attributed to the ordered spatial structure formed by the gel factor on the surface of the stationary phase and the combined effect of multiple weak interaction centers (hydrophobic, hydrophilic, hydrogen bonding and π-π interactions). It was also possible to separate nucleoside and nucleobase strongly polar compounds well in the HILIC mode, suggesting that hydrophilic groups in PAE-ANT and PAE-PA are involved in the interactions, reflecting their amphiphilic nature.The results show that the ordered gelation of dendritic organic small molecule gelators on the SiO2 surface, along with multiple carbonyl-π, π-π and other interactions, play a crucial role in the separating shape-restricted isomers. The integrated and ordered functional groups serve as the primary driving force behind the exceptionally high molecular shape selectivity of SiO2@PAE-ANT and SiO2@PAE-PA phases. Alterations in the structure of dendritic organic small molecule gelators can impact both molecular orientation and recognition ability, while changes in the type of functional groups influences the separation mechanism of shape-restricted isomers.

Design of smart temperature-sensitive terpolymeric hydrogel for multi-applications in liquid chromatography

Hydrogels with a unique three-dimensional network structure have been widely used in a variety of fields. However, hydrogels are prone to swelling under water-rich conditions, which severely limits their application in liquid chromatography. Therefore, producing a hydrogel with reliable performance and good mechanical property is essential. Smart temperature-sensitive chromatographic packings have attracted extensive attentions in recent years. In this work, sodium 4-styrenesulfonate and 1-octadecene were introduced into the poly(N-isopropylacrylamide) hydrogel to improve mechanical property and separation performance. As a consequence, a smart temperature-sensitive terpolymeric hydrogel modified silica stationary phase (ION-hydrogel@SiO2) was synthesized for multimode liquid chromatographic separation. It was found that this new ION-hydrogel@SiO2 column exhibited excellent chromatographic separation ability for a wide range of analytes. To a certain extent, this new column has a higher chromatographic separation efficiency compared to the commercial C18 column and XAmide column. Moreover, the use of low proportion of organic phase in chromatographic separation is conducive to the realization of green chromatography. By investigating the chromatographic separation mechanism, it has been demonstrated that the hydrogen bonding interaction is primarily responsible for the temperature-sensitive behavior of the hydrogel. Finally, the ION-hydrogel@SiO2 column was used for the determination of pyridoxine in the commercially available tablet samples. In conclusion, this study presents a feasible idea for the development of novel copolymer hydrogels as liquid chromatographic stationary phases.

Mechanistic studies to understand peak tailing due to sulfinic acid- and carboxylic acid-silanophilic interactions in reversed-phase liquid chromatography

Silanophilic interactions are a primary contributor to peak tailing of acidic pharmaceutical compounds, thus a thorough understanding is especially important for reversed-phase liquid chromatography (RPLC) method development. Herein, a sulfinic acid compound that exhibited severe peak tailing in RPLC with acidic mobile phases was carefully studied. Results indicated that the neutral protonated form of the sulfinic acid is involved in the strong interaction that leads to peak tailing, but that tailing can be mitigated with a blocking effect achieved through use of acetic acid modifier in the mobile phase. Peak tailing was also observed with other structurally-similar sulfinic acids and carboxylic acids but was, in general, less severe with the latter. The Hydrophobic Subtraction Model (HSM) was applied to six commercial C18 columns that exhibited different tailing behaviors for the sulfinic acid compound in attempts to identify key sites of interaction within the stationary phase. A combination of heated acid column wash experiments and density functional theory (DFT) calculations indicate that the differential interactions of the acids with vicinal silanol pairs in the stationary phase play a major role in peak tailing.

Fabrication of a biochar-doped monolithic adsorbent and its application for the extraction and determination of coumarins from Angelicae Pubescentis Radix

A monolithic adsorbent was designed aiming to the structure of osthole and columbianadin, and fabricated using diallyl phthalate as the monomer and ethylene dimethacrylate as the crosslinker with the addition of bamboo biochar, via polymerization reaction in a stainless-steel tube. The prepared composite adsorbent packed in the tube was used as a solid-phase extraction column for the extraction and determination of two coumarins (osthole and columbianadin) in Angelicae Pubescentis Radix, combing with a C18 analytical column through an HPLC instrument, which show excellent matrix-removal ability and good selectivity to osthole and columbianadin. Furthermore, the present adsorbent shows good applicability, which was used for the extraction of osthole from Duhuo Jisheng Pill. Compared to the commercial C18 and phenyl adsorbent, the present adsorbent own better selectivity and higher resolution. These results attributed to the enhanced specific surface area (141 m2/g) and enriched interaction sites of the resulting composite adsorbent, due to the doping of bamboo biochar, which can produce hydrogen bond, dipole-dipole, π-π and hydrophobic force interactions with the osthole and columbianadin. The methodology validation indicated that the present method showed good precision and good accuracy, and the composite adsorbent showed good preparative repeatability, which can be reused for no less than 100 times with the relative standard deviation ≤4.6 % (n = 100). The present work provided a simple and efficient method for the extraction and determination osthole and columbianadin from Angelicae Pubescentis Radix.

Advanced nanofibrous sorbents for the extraction of pollutants from river water and protein-containing matrices

The extraction efficiencies of thirty types of fibers produced by meltblown, alternating current electrospinning, and meltblown-co-electrospinning technologies were tested as advanced sorbents for on-line solid-phase extraction in a high-performance liquid chromatography system have been tested and compared with a commercial C18 sorbent. The properties of each fiber, which were often depended on the production process, and their applicability were demonstrated with the extraction of the model analytes nitrophenols and chlorophenols from various matrices including river water and to purify complex matrix human serum and bovine serum albumin from macromolecular ballast. Polycaprolactone fibers outperformed other polymers and were selected for subsequent modifications including (i) incorporation of hybrid carbon nanoparticles, i.e., graphene, activated carbon, and carbon black into the polymer prior to fiber fabrication, and (ii) surface modification by dip coating with polyhydroxy modifiers including graphene oxide, tannin, dopamine, hesperidin, and heparin. These novel fibrous sorbents were comparable to commercial C18 sorbent and provided excellent analyte recoveries of 70–112% even from the protein-containing matrices.

A stable core-shell metal-organic framework@covalent organic framework composite as solid-phase extraction adsorbent for selective enrichment and determination of flavonoids

Hydrophobization and stability is crucial for the practical application of most metal-organic frameworks (MOFs) in extraction technique. In this study, a stable core-shell MOF@COF composite (NH2-MIL-101(Fe)@TAPB-FPBA-COF) was successfully prepared by Schiff base reaction and applied to solid-phase extraction (SPE) of hydrophobic flavonoids. Notably, the TAPB-FPBA-COF shell acts as a hydrophobic "shield", which not only improves the hydrophobicity and stability of hydrophilic NH2-MIL-101(Fe), but also makes the extraction efficiency of flavonoids from MOF@COF composite significantly higher than that of pure NH2-MIL-101(Fe) and TAPB-FPBA-COF. In addition, a sensitive analytical method with excellent linearities (0.1–500 ng mL−1, R2 ≥ 0.9967), low limits of detection (0.02–0.04 ng mL−1 for water; 0.04–0.07 ng mL−1 for grape juice; 0.06–0.08 ng mL−1 for honey), good repeatability (intra-day/inter-day precision are 1.86–5.37%/1.82–7.79%, respectively) and only 5 mg of adsorbent per cartridge was established by optimizing the SPE process combined with high performance liquid chromatography with ultraviolet-visible detector (HPLC-UV). Meanwhile, selectivity study and comparative experiments with the commercial C18 adsorbent showed that the MOF@COF adsorbent exhibited satisfactory extraction efficiency for flavonoids due to multiple interactions such as hydrogen bonding, hydrophobic, and π-π interactions. Finally, the good recoveries in grape juice (84.5–102.5%) and honey (87.5–104.6%) samples further validated the applicability of the proposed method in complex samples.

A composite hydrogel modified silica stationary phase for mixed‑mode liquid chromatography

A novel composite hydrogel functionalized silica core-shell stationary phase was prepared by the surface modification of silica sphere. The successful synthesis of the new stationary phase (T-Sil@PAM/SA/UiO-66-NH2) was proven by scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD), etc. Due to the coexistence of amide, hydroxyl, long carbon chain and UiO-66-NH2 in composite hydrogel shell, the obtained stationary phase can be used in hydrophilic/reversed-phase liquid chromatography with multiple retention mechanisms, such as hydrophilic, hydrophobic and π - π interactions. The chromatographic retention behavior of T-Sil@PAM/SA/UiO-66-NH2 demonstrated that the new stationary phase showed excellent separation performance for both polar analytes (such as alkaloids, saccharides, etc.) and nonpolar analytes (such as substituted benzene and polycyclic aromatic hydrocarbon (PAHs), etc.). Furthermore, compared with NH2 column and commercial C18 column, the T-Sil@PAM/SA/UiO-66-NH2 exhibited a certain superiority. Moreover, the relative standard deviation (RSD) of PAHs’ retention time with eight replicates consecutive elution was found to range from 0.03% to 0.17%. Therefore, the successful use of T-Sil@PAM/SA/UiO-66-NH2 in mixed‑mode liquid chromatography expanded the potential applications of hydrogels in the field of separation.

Tunable Fluorine-Functionalized Scholl-Coupled Microporous Polymer for the Selective Adsorption and Ultrasensitive Analysis of Environmental Liquid-Crystal Monomers.

Liquid-crystal monomers (LCMs), especially fluorinated biphenyls and analogues (FBAs), are identified to be an emerging generation of persistent organic pollutants. However, there is a dearth of information about their occurrence and distribution in environmental water and lacustrine soil samples. Herein, a series of fluorine-functionalized Scholl-coupled microporous polymers (FSMP-X, X = 1-3) were designed and synthesized for the highly efficient and selective enrichment of FABs. Their hydrophobicity, porosity, chemical stability, and adsorption performance (capacity, rate, and selectivity) were regulated preciously. The best-performing material (FSMP-2) was employed as the on-line fluorous solid-phase extraction (on-line FSPE) adsorbent owing to its high adsorption capacity (313.68 mg g-1), fast adsorption rate (1.05 g h-1), and specific selectivity for FBAs. Notably, an enrichment factor of up to 590.2 was obtained for FSMP-2, outperforming commercial C18 (12.6-fold). Also, the underlying adsorption mechanism was uncovered by density functional theory calculations and experiments. Based on this, a novel and automated on-line FSPE-high-performance liquid chromatography method was developed for ultrasensitive (detection limits: 0.0004-0.0150 ng mL-1) and low matrix effect (73.79-113.3%) determination of LCMs in lake water and lacustrine soils. This study offers new insight into the highly selective quantification of LCMs and the first evidence for their occurrence and distribution in these environmental samples.

A facile approach to undecylenic acid-functionalized stationary phases for per aqueous liquid chromatography

Green chromatography techniques using low-toxic mobile phase are getting increasingly attention in recent years. The core is developing stationary phases that possess adequate retention and separation under the mobile phase of high content water. Using thiol-ene click chemistry, an undecylenic acid-bonded silica stationary phase (UAS) was prepared in a facile manner. Elemental analysis (EA), solid-state 13C NMR spectroscopy and Fourier transform infrared spectrometry (FT-IR) confirmed the successful preparation of UAS. The synthesized UAS was employed for per aqueous liquid chromatography (PALC), which uses little organic solvent during separation. Due to the hydrophilic carboxy, thioether group and hydrophobic alkyl chains of the UAS, various categories of compounds (including nucleobases, nucleosides, organic acids and basic compounds) with different properties can achieve enhanced separation under the mobile phase of high content water compared with commercial C18 and silica stationary phases. Overall, our present UAS stationary phase shows excellent separation ability toward highly polar compounds and meets the requirements of green chromatography.

Simple Preparation Method of Silica Core–Shell Spheres for HPLC in Undergraduate Chemistry

High-performance liquid chromatography (HPLC) experiments are an important part of the undergraduate analytical instrumentation laboratory courses and usually use commercial C18 silica-packed reversed-phase columns. In this experiment, a simple method of preparing SiO2 core–shell packed columns was developed to enable students to master the whole process of HPLC experiment from stationary phase preparation and column packing to separation experiments, just as they do for gas chromatography. Nonporous SiO2 particles with a particle size of approximately 2.2 μm were prepared by a three-step dilution reaction using the sol–gel method. The product yield was 92.1%. Monodisperse and spherical SiO2 core–shell particles (SiO2@dSiO2) with a particle size of about 2.4 μm were prepared by a one-step hydrothermal method using the prepared SiO2 spheres as the core. The product yield was 83.3%. The prepared SiO2@dSiO2 particles were derivatized with n-octadecyldimethylchlorosilane and then packed into a stainless steel chromatography column. A high column efficiency of 83,188 theoretical plates per meter was obtained for fluorene in reversed-phase mode for the separation of a mixture of polycyclic aromatic hydrocarbons. The column efficiency obtained with this method is the same as that of a commercial column packed with fully porous particles of the same particle size. The SiO2 core–shell stationary phase preparation method developed in this experiment has the advantages of simple process, high yield, and good repeatability. The experiment can be designed to be completed over a period of 1–3 weeks. Inorganic material synthesis is another important aspect of this experiment.

Performance evaluation of 2-undecylimidazole/propyl methacrylate bifunctional silica gel for mixed-mode reversed-phase/anion-exchange chromatography

In this work, 2-undecylimidazole (UI) and propyl methacrylate (PMA) dual-functionalized silica gel was prepared and applied as a mixed-mode chromatographic stationary phase. Successful preparation of this stationary phase (SiO2-UI-PMA) was proved through a range of characterization techniques. The chromatographic performance of the obtained SiO2-UI-PMA was investigated for the separation of environmental endocrine disruptors (phthalates, steroid hormones, bisphenols and alkylphenols), sulfonamides and food-borne stimulants in reversed-phase chromatography, as well as for the separation of inorganic anions in anion-exchange chromatography. The effect of column temperature, acetonitrile content, salt concentration and mobile phase pH on retention was studied to explore the separation mechanism, and the results indicated that this stationary phase provided multiple interactions with analytes. Compared with the commercial C18 column, the SiO2-UI-PMA demonstrated more preferable separation ability under the mobile phase conditions with a low content of acetonitrile, thereby acting as a good alternative candidate for the conventional reversed-phase stationary phase in chromatographic analysis. Furthermore, the SiO2-UI-PMA stationary phase exhibited high column efficiency (45 860 plates m−1 for progesterone) even though it was prepared from the non-serviceable silica based chromatographic packing materials.

Click postsynthesis of microporous organic network@silica composites for reversed-phase/hydrophilic interaction mixed-mode chromatography.

Recently, the good physical and chemical properties, well-defined pore architectures, and designable topologies have made microporous organic networks (MONs) excellent potential candidates in high-performance liquid chromatography (HPLC). However, their superior hydrophobic structures restrict their application in the reversed-phase mode. To solve this obstacle and to expand the application of MONs in HPLC, we realized the thiol-yne "click" postsynthesis of a novel hydrophilic MON-2COOH@SiO2-MER (MER denotes mercaptosuccinic acid) microsphere for reversed-phase/hydrophilic interaction mixed-mode chromatography. SiO2 was initially decorated with MON-2COOH using 2,5-dibromoterephthalic acid and tetrakis(4-ethynylphenyl)methane as monomers, and MER was then grafted via thiol-yne click reaction to yield MON-2COOH@SiO2-MER microspheres (5μm) with a pore size of ~1.3nm. The -COOH groups in 2,5-dibromoterephthalic acid and the post-modified MER molecules considerably improved the hydrophilicity of pristine MON and enhanced the hydrophilic interactions between the stationary phase and analytes. The retention mechanisms of the MON-2COOH@SiO2-MER packed column were fully discussed with diverse hydrophobic and hydrophilic probes. Benefiting from the numerous -COOH recognition sites and benzene rings within MON-2COOH@SiO2-MER, the packed column exhibited good resolution for the separation of sulfonamides, deoxynucleosides, alkaloids, and endocrine-disrupting chemicals. A column efficiency of 27,556 plates per meter was obtained for the separation of gastrodin. The separation performance of the MON-2COOH@SiO2-MER packed column was also demonstrated by comparing with those of MON-2COOH@SiO2, commercial C18, ZIC-HILIC, and bare SiO2 columns. This work highlights the good potential of the thiol-yne click postsynthesis strategy to construct MON-based stationary phases for mixed-mode chromatography.

Fluoro-Functionalized Spherical Covalent Organic Frameworks as a Liquid Chromatographic Stationary Phase for the High-Resolution Separation of Organic Halides.

The development of novel stationary phases with specific functionality is of great importance in chromatographic separation. Herein, we fabricated fluoro-functionalized spherical covalent organic frameworks (SF-COFs) via a bottom-up strategy as stationary phases for high-performance liquid chromatography (HPLC). Benefiting from the significant monodispersity, narrow size distribution, and high fluorine content, the SF-COFs packed column showed high column efficiency and excellent resolution for the separation of the organic fluorides involving polyfluorobenzenes, polychlorobenzenes, polybromobenzenes, perfluoroalkyl methacrylates, and halogenated trifluorotoluenes, which cannot be separated on the fluorine-free spherical covalent organic frameworks packed column. Especially, the column efficiency of 20 100-38 500 plates/m was obtained for polyfluorobenzenes, and the relative standard deviations of the retention time for continuous 10 separations of polychlorobenzenes and polybromobenzenes were less than 0.98%. Furthermore, the prepared SF-COFs packed column showed overwhelming superiority in the separation of organic halides compared with commercial C18 and pentafluorophenyl (PFP) packed columns. In addition, the compounds with different hydrophobicity or aromatic ring structure were also successfully separated on the SF-COFs packed column. This work extended the application of spherical COFs and provided a new way to introduce specific functional groups into the COF-based stationary phase for HPLC.

Dendritic organic molecular gel coating with molecular shape selectivity and its application in selective separation by liquid chromatography.

Dendritic organic molecular gels are a promising class of three-dimensional network compounds. Here, we have synthesized a new type of dendritic organic molecular gel stationary phase (SiO2-G3) by using benzyl alcohol as raw material and dimethyl 5-hydroxyisophthalate as growth unit to synthesize a third-generation organic molecular gel G3, which grafted onto the silica surface by cyanogen chloride (CC). The developed stationary phase not only exhibits high molecular shape selectivity but also has a RPLC/HILIC/IEC mixed-mode characteristic for HPLC due to the ordered structure, the multiple strong π-π stacking interactions and the introduction of a hydrophilic triazine fraction during the grafting process. Compared with a commercial C18 column, the developed column exhibited flexible selectivity, enhanced separation performance and excellent separation of monosubstituted benzene, polycyclic aromatic hydrocarbons (PAHs), positional isomers, nucleosides and nucleobases, benzoic acid and aniline compounds. In addition, the new column provided baseline separation of polycyclic aromatic hydrocarbon contaminants in Yellow River water, verifying its potential for application in the analysis of real samples.

Ingenious introduction of aminopropylimidazole to tune the hydrophobic selectivity of dodecyl-bonded stationary phase for environmental organic pollutants

Nowadays, the efficient detection of environmental organic pollutants has been a research focus in the field of chromatographic analysis. In this work, aminopropylimidazole was designedly introduced to adjust the hydrophobicity of the long-chain alkyl group, and a novel chromatographic stationary phase for the separation and analysis of environmental organic pollutants was specially prepared. Specifically, the waste aminopropyl silica gel (5 μm) was first recycled as the raw material, which was calcined at high temperature and then acidified with hydrochloric acid solution to obtain the activated silica gel. Afterwards, a new type of aminopropylimidazole/dodecyl dual-functionalized silica stationary phase (Sil-API-DD) was synthesized via one-pot reaction of the activated silica gel with 3-chloropropyltrimethoxysilane, dodecyltrimethoxysilane and 1-(3-aminopropyl)imidazole. The separation performance of Sil-API-DD was evaluated using environmental organic pollutants as the model analytes, and the results showed that an effective separation of seven alkylphenols, five bisphenols, six phthalates, seven steroid hormones and six benzophenones in reversed-phase chromatography was achieved. Moreover, the developed Sil-API-DD was found to exhibit more flexible selectivity and superior separation efficiency compared with the commercial C18 column under the tested conditions, suggesting a good application prospect.