Combinatorial Peptide Synthesis Research Articles

Controlling Surface Wettability for Automated In Situ Array Synthesis and Direct Bioscreening (Adv. Mater. 36/2021)

Coatings In article number 2102349, Yixin Zhang and co-workers report an amphiphilic coating for glass surfaces, on which small droplets of polar aprotic organic solvents can be deposited with an enhanced contact angle (small feature size) and inhibited motion (strong binding), permitting fully automated multiple rounds of combinatorial synthesis of small-molecule compounds and peptides. The amphiphilic coating can be switched to hydrophilic network for protein- and cell-based screening.

Controlling Surface Wettability for Automated In Situ Array Synthesis and Direct Bioscreening.

The in situ synthesis of biomolecules on glass surfaces for direct bioscreening can be a powerful tool in the fields of pharmaceutical sciences, biomaterials, and chemical biology. However, it is still challenging to 1) achieve this conventional multistep combinatorial synthesis on glass surfaces with small feature sizes and high yields and 2) develop a surface which is compatible with solid-phase syntheses, as well as the subsequent bioscreening. This work reports an amphiphilic coating of a glass surface on which small droplets of polar aprotic organic solvents can be deposited with an enhanced contact angle and inhibited motion to permit fully automated multiple rounds of the combinatorial synthesis of small-molecule compounds and peptides. This amphiphilic coating can be switched into a hydrophilic network for protein- and cell-based screening. Employing this in situ synthesis method, chemical space can be probed via array technology with unprecedented speed for various applications, such as lead discovery/optimization in medicinal chemistry and biomaterial development.

Synthesis of DNA-Encoded Disulfide- and Thioether-Cyclized Peptides.

DNA-encoded chemical library technologies enable the screening of large combinatorial libraries of chemically and structurally diverse molecules, including short cyclic peptides. A challenge in the combinatorial synthesis of cyclic peptides is the final step, the cyclization of linear peptides that typically suffers from incomplete reactions and large variability between substrates. Several efficient peptide cyclization strategies rely on the modification of thiol groups, such as the formation of disulfide or thioether bonds between cysteines. In this work, we established a strategy and reaction conditions for the efficient chemical synthesis of cyclic peptide-DNA conjugates based on linking the side chains of cysteines. We tested two different thiol-protecting groups and found that tert-butylthio (S-tBu) works best for incorporating a pair of cysteines, and we show that the DNA-linked peptides can be efficiently cyclized through disulfide and thioether bond formation. In combination with established procedures for DNA encoding, the strategy for incorporation of cysteines may be readily applied for the generation and screening of disulfide- and thioether-cyclized peptide libraries.

Structural basis for precursor protein-directed ribosomal peptide macrocyclization.

Macrocyclization is a common feature of natural product biosynthetic pathways including the diverse family of ribosomal peptides. Microviridins are architecturally complex cyanobacterial ribosomal peptides whose members target proteases with potent reversible inhibition. The product structure is constructed by three macrocyclizations catalyzed sequentially by two members of the ATP-grasp family, a unique strategy for ribosomal peptide macrocyclization. Here, we describe the detailed structural basis for the enzyme-catalyzed macrocyclizations in the microviridin J pathway of Microcystis aeruginosa. The macrocyclases, MdnC and MdnB, interact with a conserved α-helix of the precursor peptide using a novel precursor peptide recognition mechanism. The results provide insight into the unique protein/protein interactions key to the chemistry, suggest an origin of the natural combinatorial synthesis of microviridin peptides and provide a framework for future engineering efforts to generate designed compounds.

High-flexibility combinatorial peptide synthesis with laser-based transfer of monomers in solid matrix material.

Laser writing is used to structure surfaces in many different ways in materials and life sciences. However, combinatorial patterning applications are still limited. Here we present a method for cost-efficient combinatorial synthesis of very-high-density peptide arrays with natural and synthetic monomers. A laser automatically transfers nanometre-thin solid material spots from different donor slides to an acceptor. Each donor bears a thin polymer film, embedding one type of monomer. Coupling occurs in a separate heating step, where the matrix becomes viscous and building blocks diffuse and couple to the acceptor surface. Furthermore, we can consecutively deposit two material layers of activation reagents and amino acids. Subsequent heat-induced mixing facilitates an in situ activation and coupling of the monomers. This allows us to incorporate building blocks with click chemistry compatibility or a large variety of commercially available non-activated, for example, posttranslationally modified building blocks into the array's peptides with >17,000 spots per cm2.

Liquid-Phase Combinatorial Library Synthesis: Recent Advances and Future Perspectives

Liquid-phase combinatorial library synthesis is commonly developed into the viable alternatives or adjunct across the broad spectrum of polymer-supported organic chemistry. It includes the use of soluble polymer supports in the combinatorial synthesis of peptides and small-molecular library compounds which act as catalyst and reagent supports. It also includes high throughput biological screening with generation and evaluation of chemical leads for drug discovery development. In this review, liquid-phase combinatorial library synthesis is shown as the most efficient method of choice for the synthesis of most of the combinatorial library compounds with specific approaches from different groups that state potentials of solution-phase combinatorial synthesis.

Affinity Chromatography Based on a Combinatorial Strategy for rErythropoietin Purification

Small peptides containing fewer than 10 amino acids are promising ligand candidates with which to build affinity chromatographic systems for industrial protein purification. The application of combinatorial peptide synthesis strategies greatly facilitates the discovery of suitable ligands for any given protein of interest. Here we sought to identify peptide ligands with affinity for recombinant human erythropoietin (rhEPO), which is used for the treatment of anemia. A combinatorial library containing the octapeptides X-X-X-Phe-X-X-Ala-Gly, where X = Ala, Asp, Glu, Phe, His, Leu, Asn, Pro, Ser, or Thr, was synthesized on HMBA-ChemMatrix resin by the divide-couple-recombine method. For the library screening, rhEPO was coupled to either Texas Red or biotin. Fluorescent beads or beads showing a positive reaction with streptavidin-peroxidase were isolated. After cleavage, peptides were sequenced by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). Fifty-seven beads showed a positive reaction. Peptides showing more consensuses were synthesized, and their affinity to rhEPO was assessed using a plasma resonance biosensor. Dissociation constant values in the range of 1-18 μM were obtained. The best two peptides were immobilized on Sepharose, and the resultant chromatographic matrixes showed affinity for rhEPO with dissociation constant values between 1.8 and 2.7 μM. Chinese hamster ovary (CHO) cell culture supernatant was spiked with rhEPO, and the artificial mixture was loaded on Peptide-Sepharose columns. The rhEPO was recovered in the elution fraction with a yield of 90% and a purity of 95% and 97% for P1-Sepharose and P2-Sepharose, respectively.

Quality analysis of selective microparticle deposition on electrically programmable surfaces

Image processing and pattern analysis can evaluate the deposition quality of triboelectrically charged microparticles on charged surfaces. The image processing method presented in this paper aims at controlling the quality of peptide arrays generated by particle based solid phase Merrifield combinatorial peptide synthesis. Incorrectly deposited particles are detected before the amino acids therein are coupled to the growing peptide. The calibration of the image acquisition is performed in a supervised training step in which all parameters of the quality analyzing algorithm are learnt given one representative image. Then, the correct deposition pattern is determined by a linear support vector machine. Knowing the pattern, contaminated areas can be detected by comparing the pattern with the actual deposition. Taking into account the resolution of the image acquisition system and its magnification factor, the number and size of contaminating particles can be calculated out of the number of connected foreground pixels.

Insertion of multiple α‐amino γ‐lactam (Agl) residues into a peptide sequence by solid‐phase synthesis on synphase lanterns

The insertion of lactams into peptide analogs can enhance potency and improve receptor selectivity. The synthesis of lactam-bridged peptide sequences has been accomplished by a solid-phase approach on SynPhase lanterns using cyclic (R)- and (S)-oxathiazinane ester (2) to annulate the amino lactam residue onto the peptide chain. Parallel synthesis of alpha-amino gamma-lactam analogs of the allosteric modulator of IL-1 receptor 101.10 (D-Arg-D-Tyr-D-Thr-D-Val-D-Glu-D-Leu-D-Ala: rytvela) was performed by split-mix chemistry on the lanterns. In particular, the double insertion of alpha-amino gamma-lactams in the same peptide sequence has been accomplished by this effective method for the solid-supported combinatorial synthesis of lactam-bridged peptides. Peptides bearing an Agl residue exhibited curve shapes indicative of turn conformations in their circular dichroism spectra.

Programmable high voltage CMOS chips for particle-based high-density combinatorial peptide synthesis

We built high voltage complementary metal oxide semiconductor (CMOS) chips that generate electrical fields on their surface, such that electrically charged microparticles (diameter 10–20 μm on average) can be addressed on distinct pixel electrodes according to arbitrary field patterns. Each pixel contains a memory cell in canonical low-voltage CMOS-technology controlling a high voltage (30–100 V) potential area on the top metal layer. Particle transfer with minimal contaminations in less than 10 s for a complete chip was observed for pixels of 100 μm × 100 μm down to 65 μm × 65 μm. This allows a new way to create surface modifications on top of CMOS chips without need for additional masks or stamps. Using suitable particles, a chemically modified chip surface, and compatible chemistry, this method can be utilized for self-aligned high-density biopolymer arrays, e.g., peptide arrays. Transfer of microparticles loaded with amino acids for combinatorial peptide synthesis is demonstrated. Successful synthesis of different peptides (octamers) was proven by immunostaining. Based on results obtained by a chip containing pixel areas of different characteristics, a chip for biological applications with 16,384 pixels (10,000 pixel/cm 2) was built. Good homogeneity of peptide synthesis over the chip area was verified by immunostaining.

Combinatorial peptide synthesis on a microchip.

Microchips are used in the combinatorial synthesis of peptide arrays by means of amino acid microparticle deposition. The surface of custom-built microchips can be equipped with an amino-modified poly(ethylene glycol)methacrylate (PEGMA) graft polymer coating, which permits high loading of functional groups and resists nonspecific protein adsorption. Specific microparticles that are addressed to the polymer-coated microchip surface in a well defined pattern release preactivated amino acids upon melting, and thus allow combinatorial synthesis of high-complexity peptide arrays directly on the chip surface. Currently, arrays with densities of up to 40,000 peptide spots/cm(2) can be generated in this way, with a minimum of coupling cycles required for full combinatorial synthesis. Without using any additional blocking agent, specific peptide recognition has been verified by background-free immunostaining on the chip-based array. This unit describes microchip surface modification, combinatorial peptide array synthesis on the chip, and a typical immunoassay employing the resulting high-density peptide arrays.

A Novel Proteomic Approach Identifies New Interaction Partners for Proliferating Cell Nuclear Antigen

During DNA replication and repair, many proteins bind to and dissociate in a highly specific and ordered manner from proliferating cell nuclear antigen (PCNA). We describe a combined approach of in silico searches at the genome level and combinatorial peptide synthesis to investigate the binding properties of hundreds of short PCNA-interacting peptides (PIP-peptides) to archaeal and eukaryal PCNAs. Biological relevance of our combined approach was demonstrated by identification an inactive complex of Pyrococcus abyssi ribonuclease HII with PCNA. Furthermore we show that PIP-peptides interact with PCNA largely in a sequence independent manner. Our experimental approach also identified many so far unidentified PCNA interacting peptides in a number of human proteins.

Determination of the Substrate Specificity of Tripeptidyl-peptidase I Using Combinatorial Peptide Libraries and Development of Improved Fluorogenic Substrates

Classical late-infantile neuronal ceroid lipofuscinosis is a fatal neurodegenerative disease caused by mutations in CLN2, the gene encoding the lysosomal protease tripeptidyl-peptidase I (TPP I). The natural substrates for TPP I and the pathophysiological processes associated with lysosomal storage and disease progression are not well understood. Detailed characterization of TPP I substrate specificity should provide insights into these issues and also aid in the development of improved clinical and biochemical assays. To this end, we constructed fluorogenic and standard combinatorial peptide libraries and analyzed them using fluorescence and mass spectrometry-based activity assays. The fluorogenic group 7-amino-4-carbamoylmethylcoumarin was incorporated into a series of 7-amino-4-carbamoylmethylcoumarin tripeptide libraries using a design strategy that allowed systematic evaluation of the P1, P2, and P3 positions. TPP I digestion of these substrates liberates the fluorescence group and results in a large increase in fluorescence that can be used to calculate kinetic parameters and to derive the substrate specificity constant kcat/KM. In addition, we implemented a mass spectrometry-based assay to measure the hydrolysis of individual peptides in peptide pools and thus expand the scope of the analysis. Nonfluorogenic tetrapeptide and pentapeptide libraries were synthesized and analyzed to evaluate P1' and P2' residues. Together, this analysis allowed us to predict the relative specificity of TPP I toward a wide range of potential biological substrates. In addition, we evaluated a variety of new fluorogenic peptides with a P3 Arg residue, and we demonstrated their superiority compared with the widely used substrate Ala-Ala-Phe-AMC for selectively measuring TPP I activity in biological specimens.

Harnessing the potential of communication-mediating domains for the biocombinatorial synthesis of nonribosomal peptides

The interaction between enzymes of a nonribosomal peptide synthetase (NRPS) complex relies on the interplay of compatible sets of donor and acceptor communication-mediating (COM) domains. Hence, these domains are essential for the formation of a defined biosynthetic template, thereby directing the synthesis of a specific peptide product. Without the selectivity provided by different sets of COM domains, NRPSs should form random biosynthetic templates, which would ultimately lead to combinatorial peptide synthesis. This study aimed to exploit this inherent combinatorial potential of COM domains. Based on sequence alignments between COM domains, the crosstalk between different biosynthetic systems was predicted and experimentally proven. Furthermore, key residues important for maintaining (or preventing) NRPS interaction were identified. Point mutation of one of these key residues within the acceptor COM domain of TycC1 was sufficient to shift its selectivity from the cognate donor COM of TycB3 toward the noncognate donor COM domain of TycB1. Finally, an artificial NRPS complex was constructed, constituted of enzymes derived from three different biosynthetic systems. By virtue of domain fusions, the interactions between all enzymes were established by the same set of COM domains. Because of the abrogated selectivity, this universal communication system was able to simultaneously form two biosynthetic complexes that catalyzed the combinatorial synthesis of different peptide products.

Intelligent Design in Combinatorial Chemistry: Use of Designed Peptide Libraries to Explore Secondary and Tertiary Structures in Peptides and Proteins

AbstractFor Abstract see ChemInform Abstract in Full Text.

Translating DNA into synthetic molecules.

Translating DNA into synthetic molecules.

A peptidyl transferase ribozyme capable of combinatorial peptide synthesis

The formation of peptide bonds is a key step in both the chemical and biological synthesis of peptides. The ribozyme can use a wide range of amino acids as its substrate for the dipeptide synthesis. A library containing 29 peptides whose synthesis was catalyzed by this unique ribozyme was analyzed by mass spectrometry. These results implicate that ribozyme may have potential application in the peptide synthesis.

Isomeric differentiation and quantification of α, β-amino acid-containing tripeptides by the kinetic method: alkali metal-bound dimeric cluster ions

The kinetic method is applied to differentiate and quantify mixtures of isomeric tripeptides by generating and mass-selecting alkali metal ion-bound dimeric clusters and examining their competitive dissociations in an ion trap mass spectrometer. This methodology readily distinguishes the pairs of isomers examined here: (α-A)GG/(β-A)GG, G(α-A)G/G(β-A)G, and GG(α-A)/GG(β-A). The isomeric selectivity increases with decreasing size of the metal ion, viz. from Cs to Rb to K to Na to Li. When alanine is at the N-terminus, as in the case of (α-A)GG/(β-A)GG, the isomeric selectivity can exceed 10 3. The corresponding proton-bound dimers behave similarly to the Li clusters. Structural features that favor zwitterionic versus charge-solvated forms of the alkali metal-bound clusters are reflected in the b n and y n fragment ion abundances recorded by tandem mass spectrometry, and the propensities to form the charge-solvated or zwitterionic structures play a key role in promoting isomeric differentiation. The zwitterionic forms favor intramolecular interactions in the cluster and hence isomeric distinction. There is no discrimination in the formation of the alkali metal-bound dimers, so isomeric quantification is based entirely on dissociation kinetics. Previous kinetic method-based isomeric analyses have used the trimeric clusters and shown linear correlations between composition of the mixture of isomers and the logarithm of the branching ratio for competitive fragmentation. A similar relationship is found for the dimeric clusters examined here. As used here, the kinetic method provides a possible way for future quantitative analysis of mixtures of larger peptides such as those generated in combinatorial synthesis of peptides and peptide mimics.

Synthesis and application of functional peptides as cell nucleus-directed molecules in the treatment of malignant diseases.

The unique functions of biomolecules, including transport across biological membranes (e.g. the cell membrane, the nuclear envelope), modulation of protein function, gene transcription, reconstitution of the malignant transformation, and viral, bacterial and fungal activities underlie a high pharmaceutical potential. The development of combinatorial functional peptide modules in this important area has been slow, in contrast to the rapid development in the synthesis of small biopolymers. The conjugation of a short transmembrane transport peptide module with a cell nucleus address peptide module and with any substance is attractive for preparation of BioShuttle-based peptides because of the well-established automated synthesis of peptides. Variation of the different functional modules for drug targeting and the choice of substances can be combined to create novel bioconjugates with unique properties. This article provides an overview of previous work on the BioShuttle technology and outlines the promising use of this approach in combinatorial peptide synthesis and drug discovery.

A powerful combinatorial screen to identify high-affinity terbium(III)-binding peptides.

Lanthanide-binding tags (LBTs) are protein fusion partners consisting of encoded amino acids that bind lanthanide ions with high affinity. Herein, we present a new screening methodology for the identification of new LBT sequences with high affinity for Tb(3+) ions and intense luminescence properties. This methodology utilizes solid-phase split-and-pool combinatorial peptide synthesis. Orthogonally cleavable linkers allow an efficient two-step screening procedure. The initial screen avoids the interference caused by on-bead screening by photochemically releasing a portion of the peptides into an agarose matrix for evaluation. The secondary screen further characterizes each winning sequence in a defined aqueous solution. Employment of this methodology on a series of focused combinatorial libraries yielded a linear peptide sequence of 17 encoded amino acids that demonstrated a 140-fold increase in affinity (57 nM dissociation constant, K(D)) over previously reported lanthanide-binding peptides. This linear sequence was macrocyclized by introducing a disulfide bond between flanking cysteine residues to produce a peptide with a 2-nM apparent dissociation constant for Tb(3+) ions.Supporting information for this article is available on the WWW under http://www.chemphyschem.org or from the author.