Combination Of Criteria Research Articles

Design of optimum spacecraft reorientation control with a combined criteria of quality based on the quaternions

Specifical original problem of attitude controlling for spacecraft was proposed in this paper. Problem of optimal rotation from a known initial state in a prescribed spatial orientation was studied in detail (turnaround time is not fixed). Design of optimal program of reorientation is based on new indicator of quality that combines energy costs including the contribution of controlling torques and integral of rotary energy (in a known proportion) and reorientation time; presence of duration factor bounds time of rotation finish. To construct an optimal control of angular momentum changing, quaternionic method and the maximum principle were applied. Differential equation that relates spacecraft angular momentum and quaternion of spacecraft orientation is a base to obtain analytic solution to a problem. We reveal the properties of optimum control program analytically, and study key features of optimum motion in details. Also, we write the formalized equations, mathematical formulas to design optimal law for change of spacecraft’s angular momentum. Analytic relations and equations are given for finding the optimal solution. Control law (in as explicit dependence between phase variables and con-trolling variables has been formulated. Main relations determining optimum values of parameters for rotation control algorithm were given. The closed-form law for rotation was obtained for dynamically symmetric solids. Numerical example as well as results of mathematical modeling of spacecraft motion that formed using optimum control are presented. This data as addition to the made theoretic descriptions shows reorientation process (in virtual form) and demonstrates practical feasibility of the developed control method. A designed algorithm for optimal control of rotation improves an efficiency of attitude system, and originates more economical performing of space vehicle during its flight along orbit.

ENVIRONMENTAL ASSESSMENT BASED ON SOIL LOSS, DEFORESTATION IN PERMANENT PRESERVATION AREAS, AND WATER QUALITY APPLIED IN THE ITACAIÚNAS WATERSHED, EASTERN AMAZON.

To understand how various environmental pressures may threaten the Amazon territory, specifically its hydrographic basins, it is crucial to guide key management actions such as soil conservation, environmental preservation, and forest restoration. This paper, based on a detailed study conducted in the Itacaiúnas River Watershed (IRW) located in the Carajás mining province—one of the most significant metallogenetic provinces globally and within the Arc of Deforestation in the Amazon—proposes a new index to assess environmental threats or vulnerabilities. The index evaluates soil loss, deforestation in permanent preservation areas, and water quality—key environmental issues in watershed management. Using geoprocessing and remote sensing techniques, we applied the index across the entire catchment area and at the beginning of the drainage network (a proxy for river springs). Our findings reveal that: i) 68% of unit catchments (32% of headwaters) exhibit “High” or “Very High” soil loss vulnerability; ii) 69% of unit catchments (32% of headwaters) have more than 20% of their permanent preservation areas deforested, representing the primary threat among the three criteria to the basin; iii) Only 4.7% of unit catchments (2% of headwaters) present any chemical risk related to water consumption. The combined criteria (simple arithmetic mean of normalized values) indicate that the east-central and southern parts of the watershed have higher index values, necessitating greater attention to soil conservation. In contrast, the center-western area of the basin, characterized by conservation units and indigenous land, showed low index values but remains at risk primarily due to soil loss if environmental preservation actions are not maintained.

A critical review on free edge delamination fracture criteria

Laminates experience three-dimensional singular stress near their free edges due to elastic mismatches between layers, which can cause delamination. This paper critically evaluates methods for predicting free edge delamination and highlights the limitations of conventional strength-of-materials and fracture mechanics approaches. The Theory of Critical Distances (TCD) uses a material-dependent critical distance parameter, while Finite Fracture Mechanics (FFM) employs a combined stress-energy criterion without needing a predefined length parameter. This review compares TCD and FFM, also discussing Cohesive Zone Models and Phase-Field Models, and aims to guide the selection of appropriate methods for analyzing free edge delamination.

A New Avrami-Based Exponential Model for Predicting Fiber-Reinforced Polymer Bar Service Life: A Comparison with Existing Models Using a Large Database

The fiber-reinforced polymers (FRP) bar is a promising solution to problems caused by steel rebar corrosion in concrete. To assess the service life of the FRP bar based on accelerated test results, it is crucial to have a reliable model. Here, a modified exponential (MEP) model is proposed based on the Avrami equation. The Avrami equation provides a theoretical foundation for the empirical exponential (EP) model and does not a priori fix the power of the exposure time to one. A database containing 903 data points from 74 groups of test specimens is assembled to compare the reliability of the MEP model vis-a-vis the EP, single logarithmic, double logarithmic, and power function models. The combination of Root Mean Square Error (RMSE), the Mean Absolute Error (MAE), and the coefficient of determination (R2) criteria is proposed for assessing model reliability. It is shown that in certain cases the combined criteria, versus R2 alone, significantly increase the number of test groups meeting the acceptable performance limit. Observed test data aberrations are found to have minor influence on the results of the EP model, but they significantly influence the results of the other four models. The EP model generally predicts the lowest activation energy and the smallest strength retention for similar groups of bars, while the predicted values of the other four models exhibit a relatively small difference. The difference between the predicted strength retention values of the EP and MEP models shows an increasing trend with the increase of the absolute value of (1 − n), where n is the power of the exposure time in the MEP model.

Efficacy and limitation of nonparoxysmal atrial fibrillation ablation in patients with heart failure with preserved ejection fraction.

Catheter ablation for atrial fibrillation (AF) reduces heart failure (HF) hospitalization in patients with HF with preserved ejection fraction (HFpEF). However, the long-term outcomes and subclinical HF after nonparoxysmal AF ablation in HFpEF patients have not been fully evaluated. One-hundred-ninety nonparoxysmal AF patients with left ventricular ejection fraction ≥50% who underwent first-time AF ablation were studied. HFpEF was diagnosed from a history of congestive HF and/or combined criteria of N-terminal pro-brain natriuretic peptide (NT-proBNP) concentration and transthoracic echocardiogram parameters, including average septal-lateral E/e' and tricuspid regurgitation peak velocity. Ninety-five patients with HFpEF (HFpEF group) were compared with 95 patients without HF (CNT group). Low voltage area (LVA) was defined as an area with a bipolar electrogram of <0.5 mV covering >5% of the total left atrial surface. The primary endpoint was a composite of death from any cause or hospitalization for worsening HF. The secondary endpoint was subclinical HFpEF defined from NT-proBNP concentration and average septal-lateral E/e' or tricuspid regurgitation peak velocity at 6-12 months after the procedure irrespective of the rhythm. Kaplan-Meier curves showed that the primary composite endpoint did not differ between the two groups (mean follow-up period 707 ± 75 days, log-rank p = 0.5330). However, significantly more patients in the HFpEF group reached the secondary endpoint (42 [44%] vs. 13 [14%], p < 0.0001). Multivariate analysis revealed that a high preablation NT-proBNP (odds ratio [OR] 1.001, 95% confidence interval [CI] 1.001-1.002, p = 0.0040) and the existence of LVA (OR 5.983, 95% CI 1.463-31.768, p = 0.0194) independently predicted the secondary endpoint in HFpEF patients. After nonparoxysmal AF ablation, mortality of HFpEF patients was not inferior compared to patients without coexisting HF. However, subclinical HF occasionally persisted especially in HFpEF patients with a high preprocedure NT-proBNP concentration and LVA.

Optimal tongue weight selection criteria for light vehicle-trailer combinations

When towing a trailer, proper weight distribution between the vehicle and trailer axles is crucial for system stability and manoeuvrability. Therefore, drivers are strongly recommended to keep the tongue weight, the downward force applied by the trailer at the hitch, within 10–15% of the trailer's gross weight. Despite extensive searches, the current academic and technical literature appears to lack quantitative analyses justifying the standard tongue weight recommendations. This paper presents comprehensive analyses of the lateral behaviour characteristics of light vehicle-trailer combinations influenced by variations in tongue weight. Subsequently, it proposes two novel selection criteria for determining the optimal tongue weight from the perspectives of stability and consistency. The optimal tongue weights for the stability and consistency of the nominal vehicle-trailer system are identified as 22.61% and 48.61% of the trailer weight respectively. Finally, the effectiveness of the proposed criteria is verified through CarSim simulation experiments, assessing 3% settling time and Root-Mean-Square error of vehicle yaw rate.

Acoustic Emission based determination of delamination initiation in GFRP laminates

Acoustic Emission (AE) has the potential to identify delamination initiation in quasi-static Mode I fracture tests on glass fiber-reinforced polymer-matrix (GFRP) laminates. It had been shown that a combined AE activity and intensity criterion yields critical Mode I delamination resistance values GIC for an AS4/PEEK carbon fiber thermoplastic composite that are comparable to those from data analysis according to ASTM D5528. However, the AE historic index also allows for detection of delamination initiation under Mode I and Mode II loading of carbon fiber reinforced thermoplastics and thermosets. In the present study, these AE criteria for initiation under Mode I, Mode II and Mixed Mode I/II loading of GFRP epoxy laminates are compared with AE signal energy as additional initiation criterion. Initiation under Mode II and Mixed Mode I/II at a ratio of 4:3 was determined with two different set ups for each Mode. For some test configurations noise signals make unambiguous initiation detection difficult. Determination by means of AE energy or AE activity and intensity yields more conservative GC values compared with the AE historic index or criteria defined in the standards, however, with similar repeatability.

The covid-19 pandemic and its effect on maternal health indicators in Latin American countries

Introduction: Maternal mortality constitutes one of the most important indicators of public health, and also reflects the response capacity of health systems to the healths needs of one of the most vulnerable groups, such a pregnant women. Objective: Conduct a bibliographic review of the maternal mortality indicators used by health management teams, before and during the COVID-19 pandemic in Latin American countries. Methodology: A bibliographic review was carried out by searching for scientific articles related to the topic. In addition, information was collected from epidemiological bulletins updated as of the review date. The PEO question was used (Population: pregnant women. Exposure: before and during the COVID-19 pandemic Result: maternal mortality in the context before and during the pandemic): What are the maternal mortality indicators before and during the COVID-19 pandemic? The search sources were PubMed, Scielo and Google Scholar. The key words were: "Maternal mortality" "Morbidity and mortality indicators" "COVID-19". Articles published from January 1, 2021 to May 30, 2023 were selected. Results: Of the 5670 articles found, 5654 articles were discarded because they did not meet our criteria for keyword combinations in the title or abstract. Of the 16 articles selected, 12 had research results. Of the total number of articles, there were 4 prospective articles and 8 retrospecitve articles, 4 were considered for conceptual theoretical aspects that are related to the objective of the study. Conclusion: an increase in the maternal mortality ratio was evident in the pre-pandemic period and during the pandemic compared to the figures from previous years, this was associated with the presence of comorbidities and maternal risk factors as well as the limited supply of health services, lack of intra-and extramural organization.

A simplified approach for predicting last ply failure load of VO-notched laminated composite components

In this study, the last ply failure (LPF) load of composite laminates with VO-notches under pure mode I and mixed mode I/II was investigated experimentally, analytically, and numerically. The efficiency of the virtual isotropic material concept (VIMC) in combination with a new combined failure criterion was also evaluated. The J-integral and average strain energy density failure criteria were combined with VIMC. Using analytical expressions for the J-integral and the average strain energy density (ASED), the prediction of the fracture load of notched components was simplified and expedited. The experimental fracture loads of notched specimens were determined for quasi-isotropic and cross-ply laminates under mode I and mixed mode I/II. The fracture loads were predicted using analytical expressions for the J-integral and ASED, combined with VIMC. The VIMC-ASED and VIMC-J-integral failure criteria demonstrated good accuracy in predicting the LPF, with the highest accuracy for mode I, slightly reduced accuracy for mixed mode I/II. VIMC, in combination with energy-based failure criteria, effectively predicts the fracture load. The use of analytical expressions further simplified and expedited the prediction process without losing accuracy, making it a practical approach for engineering applications. Additionally, this approach significantly reduces the time and cost associated with extensive experimental testing.

Performance assessment of residential heat pumps operating in extreme cold climates using zeotropic mixtures

Extremely cold climates subject residential heat pumps to significant temperature differences between the heat source and the ambient being heated, which may lead to system failure and reduced compressor performance. The present study considers the possibility of improving the performance of heat pump systems that are simultaneously used for residential space and domestic water heating while subjected to climates varying from -25 °C to 5 °C by exploring the use of zeotropic mixtures. CO2-based binary mixtures composed of low-GWP (global warming potential) refrigerants are considered – R32, R1234yf, and R290 – aiming to benefit from environmentally friendly and flame suppressants characteristics of CO2, as well as the improved thermal efficiency granted by the addition of a secondary refrigerant. A thermodynamic model was developed for a standard vapor-compression heat pump cycle and used to maximize the coefficient of performance limited by the minimum pinch point in the heat exchangers. Our analysis explores the effect of several parameters, such as, the mixture components, mass fractions, space and water heating demands, and heat source temperature on the heat pump's performance. For cold climates, the mixture of R32 (90%)/CO2 (10%) yields the highest COP and CO2-rich mixtures exhibit the lowest. However, by increasing the mass fraction of CO2 within the zeotropic mixture, the pressure ratio of the heat pump was improved. When considering combined performance criteria, such as the volumetric heating effect and the total heat delivered related to heat pump size, CO2-rich mixtures tend to allow more compact systems, especially in colder climates.

Prospective prediction of treatment outcomes in adolescents: A head-to-head comparison of alternative model for personality disorder versus borderline personality disorder.

Despite substantial evidence in support of the alternative model for personality disorder (AMPD) that has accumulated over the last decade, a gap remains in terms of head-to-head comparisons of the predictive power of Section II categorical diagnoses versus Section III AMPD diagnoses for clinical outcomes. The current study uses archival data from a naturalistic treatment outcome study in an adolescent psychiatric inpatient sample to compare the predictive power of the Section III AMPD (combined Criterion A and B assessment) versus Section II borderline personality disorder (BPD) in predicting treatment outcomes from admission to discharge. Outcomes in general psychiatric severity and emotion dysregulation were assessed in a sample of 59 adolescents (76.3% female, Mage = 15.27, SD = 1.17) at admission and at discharge on average about a month later. Results showed that, on average, predictive power of both AMPD measures and BPD were relatively modest. However, the AMPD, operationalized through combined measures of identity diffusion and maladaptive traits, was a stronger predictor of reduction in general psychiatric severity than a measure of BPD. The findings of the study add to a growing body of literature pointing to the advantages of Section III AMPD over Section II categorical diagnosis for clinical utility in predicting treatment response. (PsycInfo Database Record (c) 2024 APA, all rights reserved).

Fasting or 2-hour postprandial plasma glycemic criteria for gestational diabetes mellitus are aassociated with distinct adverse outcomes

ObjectiveWe aimed to evaluate the heterogeneity of gestational diabetes mellitus (GDM) patients diagnosed with various screening criteria.MethodsWe stratified pregnant women using consecutive fasting plasma glucose (FPG) and 2-hour postprandial plasma glucose (2hPPG) intervals of 0.2 mmol/L. The incidence of abnormal neonatal birthweight and birth-related adverse outcomes was compared with that of pregnant women without GDM.ResultsThe study included 39,988 pregnant women (18–45 years, mean [SD], 31.5 [4.7] years) in Ningbo, China. The means (SDs) of FPG and 2hPPG within 24–28 weeks of gestation were 4.5 (0.5) and 6.8 (1.3) mmol/L, respectively. A total of 3025 (7.6%) women had 5.1–6.9 mmol/L FPG and 4560 (11.4%) had 8.5–11.0 mmol/L 2hPPG. The incidence of GDM according to the two combination criteria was 17.3% (6908 cases). The relative risk (RR) for < 10th percentile birthweight (< 10th WT) was 0.82 (95% CI, 0.74–0.91, p < 0.001) by 5.1 mmol/L FPG criterion and 1.14 (95% CI, 1.06–1.23, p < 0.001) by 8.5 mmol/L 2hPPG criterion, while the RRs for > 90th percentile birthweight (> 90th WT) were 1.48 (95% CI, 1.35–1.63, p < 0.001) and 0.95 (95% CI, 0.86–1.04, p = 0.29) according to the corresponding criteria. The FPG criterion was more strongly associated with maternal hypertension than the 2hPPG criterion. Both criteria did not show a distinct association with other composite adverse outcomes.ConclusionHigh FPG is significantly associated with high birth weight, whereas high 2hPPG is slightly associated with low birth weight. Our findings highlight the heterogeneity of patients with GDM diagnosed by different criteria.

Combined Organ Transplantation in Patients with Advanced Liver Disease.

Transplantation of the liver in combination with other organs is an increasingly performed procedure. Over the years, continuous improvement in survival could be realized through careful patient selection and refined organ preservation techniques, in spite of the challenges posed by aging recipients and donors, as well as the increased use of steatotic liver grafts. Herein, we revisit the epidemiology, allocation policies in different transplant zones, indications, and outcomes with regard to simultaneous organ transplants involving the liver, that is combined heart-liver, liver-lung, liver-kidney, and multivisceral transplantation. We address challenges surrounding combined organ transplantation such as equity, utility, and logistics of dual organ implantation, but also advantages that come along with combined transplantation, thereby focusing on molecular mechanisms underlying immunoprotection provided by the liver to the other allografts. In addition, the current standing and knowledge of machine perfusion in combined organ transplantation, mostly based on center experience, will be reviewed. Notwithstanding all the technical advances, shortage of organs, and the lack of universal eligibility criteria for certain multi-organ combinations are hurdles that need to be tackled in the future.

Computed tomography-based contrast features for distinguishing extra-gastrointestinal stromal tumors from intra-abdominal fibromatosis.

This study aims to define the computed tomography (CT) criteria that distinguish extra-gastrointestinal stromal tumors (eGISTs) from intra-abdominal fibromatosis (IAF). Retrospective analysis was conducted on CT images obtained from 31 pathologically confirmed cases, including 17 cases of eGISTs and 14 of IAF. Various parameters [e.g., lesion location, contour characteristics, border delineation, enhancement patterns, presence of intralesional necrosis, vessels, air, fat, and hemorrhage, the long diameter (LD), LD/short diameter (SD) ratio, and volume (LD × SD × height diameter)] were meticulously evaluated. In addition, the degree of enhancement during arterial and portal venous phases and the lesion-to-aorta CT attenuation ratio during both phases were quantified. Statistical analysis was performed using Fisher's exact test, the Student's t-test, and the receiver operating characteristic curve to identify significant CT criteria. Sensitivity and specificity assessments were conducted for single and combined CT criteria. Significant differentiators between eGISTs and IAF include non-mesenteric localization, irregular contour, well-defined borders, heterogeneous enhancement, presence of intralesional necrosis and vessels, and absence of intralesional fat, with LD exceeding 9.6 cm, an LD/SD ratio >1.22, and volume surpassing 603.3 cm3 (P < 0.05). A combination of seven or more of these criteria yielded a specificity of 100%. Ten distinct CT criteria have been identified to distinguish eGISTs from IAF, notably encompassing non-mesenteric localization, irregular contour, well-defined borders, heterogeneous enhancement, presence of intralesional necrosis and vessels, absence of intralesional fat, LD >9.6 cm, an LD/SD ratio >1.22, and volume surpassing 603.3 cm3. The current findings establish CT criteria to distinguish eGISTs from IAF in a clinical setting.

Sparing confirmatory testing in primary aldosteronism (SCIPA): a multicenter retrospective diagnostic accuracy study

BackgroundThe diagnosis of primary aldosteronism (PA) is comprehensive, which includes case-detection testing, case confirmation followed by subtype classification. In certain instances, such as in the setting of spontaneous hypokalemia, suppressed renin activity (PRA) plus plasma aldosterone concentration (PAC) of > 15 ng/dL, one may not proceed with confirmatory tests. However, the quality of evidence behind this approach is very low. This study sought to evaluate the proposed “simplified confirmatory pathway” that can spare confirmatory testing for primary aldosteronism by evaluating the diagnostic performances of the various pre-specified PAC thresholds in combination with findings of suppressed renin and spontaneous hypokalemia.MethodsThis is a multi-center, retrospective diagnostic accuracy cohort-selected cross-sectional study. A total of 133 participants aged 18 years and above underwent saline infusion test between January 2010 to March 2024. The outcome measures comprise of the diagnostic performances of the different index test combinations (baseline PAC, baseline PRA and presence of spontaneous hypokalemia): sensitivity, specificity, negative predictive value, positive predictive value, positive likelihood ratio, negative likelihood ratio, and diagnostic accuracy. Data analysis was performed using SPSS 29.0.1.0 & MedCalc 20.218.ResultsOf the 133 patients who underwent saline infusion test, 88 (66.17%) were diagnosed with PA. A PAC of > 25 ng/dL plus PRA < 1.0 ng/dL/hr with spontaneous hypokalemia showed the highest specificity at 100% (95% CI 90.51%, 100.00%) and positive predictive value at 100% (85.18 – 100.00%). The minimum acceptable combination criteria were determined to be a PAC of > 20 ng/dL plus PRA < 0.6 ng/dL/hr, and presence of spontaneous hypokalemia. It has high specificity (94.59%; 95% CI 81.81%, 99.34%), positive predictive value (93.55%, 95% CI 78.49%, 98.29%), and moderate positive likelihood ratio (LR+) (6.39, 95% CI 1.61, 25.38)ConclusionA hypertensive patient with spontaneous hypokalemia and screening findings of PAC > 20 ng/dL and suppressed PRA of < 0.6 ng/ml/hr, may be classified as “overt primary aldosteronism confirmed” and may not need to proceed with dynamic confirmatory testing.Protocol registration numberSRCTN34186253

Separation of ventilation and perfusion of electrical impedance tomography image streams using multi-dimensional ensemble empirical mode decomposition

Objective. In the future, thoracic electrical impedance tomography (EIT) monitoring may include continuous and simultaneous tracking of both breathing and heart activity. However, an effective way to decompose an EIT image stream into physiological processes as ventilation-related and cardiac-related signals is missing.Approach. This study analyses the potential of Multi-dimensional Ensemble Empirical Mode Decomposition by application of the Complete Ensemble Empirical Mode Decomposition with Adaptive Noise and a novel frequency-based combination criterion for detrending, denoising and source separation of EIT image streams, collected from nine healthy male test subjects with similar age and constitution.Main results. In this paper, a novel approach to estimate the lung, the heart and the perfused regions of an EIT image is proposed, which is based on the Root Mean Square Error between the index of maximal respiratory and cardiac variation to their surroundings. The summation of the indexes of the respective regions reveals physiologically meaningful time signals, separated into the physiological bandwidths of ventilation and heart activity at rest. Moreover, the respective regions were compared with the relative thorax movement and photoplethysmogram (PPG) signal. In linear regression analysis and in the Bland–Altman plot, the beat-to-beat time course of both the ventilation-related signal and the cardiac-related signal showed a high similarity with the respective reference signal.Significance. Analysis of the data reveals a fair separation of ventilatory and cardiac activity realizing the aimed source separation, with optional detrending and denoising. For all performed analyses, a feasible correlation of 0.587 to 0.905 was found between the cardiac-related signal and the PPG signal.

New quasars behind the Magellanic Clouds

Context. Quasi-stellar objects (QSOs) are a basis for an absolute reference system for astrometric studies. A system like this at the far side of nearby galaxies is required to facilitate measuring of the proper motions of these galaxies. However, the foreground contamination from the galaxies themselves is a problem for the QSO identification. Aims. We search for new QSOs behind the two Magellanic Clouds, the Magellanic Bridge, and the Magellanic Stream. Methods. We identify QSO candidates with a combination of near–infrared colors and variability criteria from the public ESO Visual and Infrared Survey Telescope for Astronomy (VISTA) Magellanic Clouds (VMC) survey. We confirm their nature from broad emission lines with low-resolution optical spectroscopy. Results. We confirmed the QSO nature of 136 objects. They are distributed as follows: 12 behind the Large Magellanic Cloud, 37 behind the Small Magellanic Cloud, 63 behind the Bridge, and 24 behind the Stream. The QSOs span a redshift range from z~0.1 to z~2.9. A comparison of our quasar selection with the Quaia quasar catalog, based on Gaia low-resolution spectra, yields a selection and confirmation success rate of 6–19%, depending on whether the quality of the photometry, the magnitude ranges, and the colors are considered. Our candidate list is rather incomplete, but the objects in it are likely to be confirmed as quasars with a probability of ~90%. Finally, we report a list of 3609 objects in the entire VMC survey that match our color and variability selection criteria; only 1249 of them have Gaia counterparts. Conclusions. Our combined infrared color and variability criteria for the QSO selection prove to be efficient: ~90% of the observed candidates are bona fide QSOs and allow us to generate a list of new high-probability quasar candidates.

Mesh-free SPH modelling of sediment scouring and flushing considering grains transport and transformation

Sediment scour numerical simulation plays a critical role in the design of water-resistant foundation engineering, and this paper addresses a significant gap in most related studies, which often overlook the transformation of sediment and struggle to identify the actual riverbed obscured by yielding bed and suspended load. To tackle this challenge, a comprehensive sediment model based on the meshless Smoothed Particle Hydrodynamics (SPH) method was developed. Firstly, to enhance computational efficiency and mitigate the high cost of Fluid-Solid Interaction (FSI) between water and sediments, cohesionless sediment grains were modelled as non-Newtonian fluids, with yield strength determined according to a combined strength criterion. Subsequently, sediment transformation and identification were determined based on sediment particle velocity and shear stress, with the seepage force driving yield sediment particle motion at the interface. The effectiveness of this comprehensive sediment model was validated through comparison with three scour experiments. The results show better agreement between the model and experimental data, with a root-mean-square error of less than 2.17% in scour morphology simulation and successful identification of the actual post-scouring bed surface in each case. However, the free surface simulation in this model still exhibits slight error, with a root-mean-square error of less than 8.35%.

Does VIMC-FMC work well on highly ductile bimetal joints? An investigation on mixed mode I/II fracture of AA1050/Cu bimetal weakened by U-notches

In this study, it is attempted to check if the virtual isotropic material concept (VIMC), originally suggested for fiber-reinforced composite laminates, can be used as an appropriate simplifying tool in fracture estimation of notched bimetals. First, the aluminum alloy AA1050 and the copper are cladded together using the roll-bonding technique. Then, several U-notched bimetal specimens are manufactured to perform fracture tests under mixed mode I/II loading conditions. Due to the highly ductile behavior of the AA1050/Cu bimetal, the fictitious material concept (FMC) is adopted to equate the bimetal with a fictitious material having perfectly linear elastic behavior with the aim to avoid the elastoplastic fracture analysis. Finally, the VIMC and FMC are coupled with three famous brittle fracture models, i.e., the U-notch maximum tangential stress (UMTS), U-notch mean stress (UMS), and U-notch strain energy density (USED) criteria, for predicting the experimentally measured strength of the notched bimetal specimens. The results indicate that the maximum discrepancy between the theoretical predictions and the experimental results in all the combined failure criteria is less than 8%. Therefore, the VIMC-FMC combination is found to be quite effective as a converter to solve the complex problem of highly ductile fracture of notched inhomogeneous anisotropic bimetals under mixed mode I/II loading using only the linear elastic analysis of the fictitious homogeneous isotropic plates. Also, found in this research is that not only VIMC works well on fiber-reinforced composite laminates, but also on bimetal joints.

Experimental and theoretical investigation of the influence of post-curing on mixed mode fracture properties of 3d-printed polymer samples

This study explores the mechanical properties and fracture characteristics of additively manufactured acrylonitrile butadiene styrene specimens, focusing on the impact of raster angle and post-process heat treatment. To this end, a large number of tensile and semi-circular bending samples with three distinct raster angles of 0/90°, 22/ − 68°, and 45/ − 45° were prepared and exposed to four types of heat treatments with different temperature and pressure conditions. Simultaneously, theoretical models of maximum tangential stress (MTS) and generalized MTS (GMTS) were developed to estimate the onset of specimen fracture under mixed-mode in-plane loading conditions. Recognizing the non-linear behavior within the stress–strain curve of tensile test samples, particularly in the annealed samples, an effort was undertaken to transform the original ductile material into a virtual brittle material through the application of the equivalent material concept (EMC). This approach serves the dual purpose of bypassing intricate and tedious elastoplastic analysis, while concurrently enhancing the precision of the GMTS criterion. The experimental findings have revealed that while the annealing process has a minimal effect on the yield strength, it considerably enhances energy absorption capacity, increases fracture toughness, and reduces the anisotropy. Additionally, the combined EMC-GMTS criterion has demonstrated its capability to predict the failure of the additively manufactured parts with an acceptable level of accuracy.