Color Scale Research Articles

Highly sensitive flexible pressure sensor based on a 1D/2D hybrid aerogel

Wearable pressure sensors with highly sensitive and wide detection ranges are essential for human motion monitoring. In this work, a self-assembled hybrid aerogel was obtained by polyacrylonitrile nanofibers, polyaniline, and reduced graphene oxide. Based on the complementation of 1D and 2D nanomaterials, the aerogel acted like a spring under lower pressure and a membrane under higher pressure, showing great potential in human motion monitoring. According to the wide detection range of the aerogel, an artificial hand was designed to recognize different spatial pressures such as grasping a pen, holding a bottle, and shaking hands. These signal outputs could be precisely reflected by voltage change and further converted to RGB values. Meanwhile, a shoe pad was prepared to monitor foot pressure and the resistance change could be converted to color scale signals. This work provides a new strategy for 1D/2D hybrid nanomaterials-based aerogel with wide pressure ranges in flexible electronics.

Data retrieval from archival renal biopsies using nonlinear microscopy.

Thorough examination of renal biopsies may improve understanding of renal disease. Imaging of renal biopsies with fluorescence nonlinear microscopy (NLM) and optical clearing enables three-dimensional (3D) visualization of pathology without microtome sectioning. Archival renal paraffin blocks from 12 patients were deparaffinized and stained with Hoechst and Eosin for fluorescent nuclear and cytoplasmic/stromal contrast, then optically cleared using benzyl alcohol benzyl benzoate (BABB). NLM images of entire biopsy fragments (thickness range 88-660 μm) were acquired using NLM with fluorescent signals mapped to an H&E color scale. Cysts, glomeruli, exudative lesions, and Kimmelstiel-Wilson nodules were segmented in 3D and their volumes, diameters, and percent composition could be obtained. The glomerular count on 3D NLM volumes was high indicating that archival blocks could be a vast tissue resource to enable larger-scale retrospective studies. Rapid optical clearing and NLM imaging enables more thorough biopsy examination and is a promising technique for analysis of archival paraffin blocks.

Development of an adaptive two-phalanx grip model for robotic manipulators

The purpose of this work is to study the problem of uniform grip at the points of contact of a round or spherical object (fruits and vegetables) with the grip. The research methodology uses pressure sensors mounted on the “fingers” of the handle. At a certain force value in the contact zone, the “fingers” of the handle stop. The grip must create equal forces at the points of contact of all “fingers” for an even grip. To explore these issues, phalangeal graspers adapting to the fetal surface are analyzed here. The flat model shows the general patterns of the relationship between the forces of the “fingers” of the grip and the round object to be grasped. The flat model shows the general patterns of the relationship between the forces of the “fingers” of the grip and the round object to be grasped. We examined the 3D model of this gripper and calculated the parameters of the 3D model. Conclusions and practical consequences are the values of stresses and elastic displacements at the points of the contact lines of the teeth of the 3D models of the gripper and the object being grabbed. The distribution of forces on a flat diagram and the values of von Mises stresses in the 3D model demonstrate a certain similarity in the uniformity of distribution of these parameters. Color scales with the values of the corresponding parameters are also presented; the calculation was carried out using the finite element modeling method in inventor.

One pot two-alkali clarification process to minimize sucrose degradation of clarified sugarcane juice during evaporation

Chemical degradation of sucrose during evaporation is a key production issue for the sugar cane industry. Although targeting higher juice pH using Lime Saccharate (LS) is commonly recommended to reduce sucrose degradation, this study showed reduced sucrose degradation occurs with increasing juice pH at the expense of higher invert sugar degradation and residual Ca2+ which could respectively lead to increase in juice colour and higher scaling propensity. The study also showed that Na+ and K+ ions have minimal effect on sucrose hydrolysis, while Ca2+ and Mg2+ increased the rate of sucrose hydrolysis through reducing juice pH and via complexation with the sucrose molecule. With this knowledge, a novel two-stage clarification method using a hybrid alkaline agent compared to LS was assessed for sucrose degradation and clarification performance. The results showed that LS/Mg(OH)2, LS/Na2CO3, LS/KOH and LS/NaOH showed lower sucrose degradation than the conventional LS method with up to 53% lower residual Ca2+ levels. LS/KOH and LS/NaOH achieved clarification performances comparable to the LS under the tested conditions while, LS/Mg(OH)2 and LS/Na2CO3 would further require further testing to improve clarification performance.

J-PLUS: Toward a homogeneous photometric calibration using Gaia BP/RP low-resolution spectra

Aims. We present the photometric calibration of the 12 optical passbands for the Javalambre Photometric Local Universe Survey (J-PLUS) third data release (DR3) comprising 1642 pointings of two square degrees each. Methods. We selected nearly 1.5 million main sequence stars with a signal-to-noise ratio larger than ten in the 12 J-PLUS passbands and available low-resolution (R = 20–80) spectrum from the blue and red photometers (BP/RP) in Gaia DR3. We compared the synthetic photometry from BP/RP spectra with the J-PLUS instrumental magnitudes after correcting for the magnitude and color terms between both systems in order to obtain a homogeneous photometric solution for J-PLUS. To circumvent the current limitations in the absolute calibration of the BP/RP spectra, the absolute color scale was derived using the locus of 109 white dwarfs closer than 100 pc with a negligible interstellar extinction. Finally, the absolute flux scale was anchored to the Panoramic Survey Telescope and Rapid Response System (Pan-STARRS) photometry in the r band. Results. The precision of the J-PLUS photometric calibration estimated from duplicated objects observed in adjacent pointings and by comparison with the spectro-photometric standard star GD 153 is ~12 mmag in u, J0378, and J0395, and it is ~7 mmag in J0410, J0430, ɡ, J0515, r, J0660, i, J0861, and z. The estimated accuracy in the calibration along the surveyed area is better than 1% for all the passbands. Conclusions. The Gaia BP/RP spectra provide a high-quality, homogeneous photometric reference in the optical range across the full sky in spite of their current limitations as an absolute reference. The calibration method for J-PLUS DR3 reaches an absolute precision and accuracy of 1% in the 12 optical filters within an area of 3284 square degrees.

Visualisations for Bayesian Additive Regression Trees

Tree-based regression and classification has become a standard tool in modern data science. Bayesian Additive Regression Trees (BART) has in particular gained wide popularity due its flexibility in dealing with interactions and non-linear effects. BART is a Bayesian tree-based machine learning method that can be applied to both regression and classification problems and yields competitive or superior results when compared to other predictive models. As a Bayesian model, BART allows the practitioner to explore the uncertainty around predictions through the posterior distribution. In this paper, we present new Visualisation techniques for exploring BART models. We construct conventional plots to analyse a model’s performance and stability as well as create new tree-based plots to analyse variable importance, interaction, and tree structure. We employ Value Suppressing Uncertainty Palettes (VSUP) to construct heatmaps that display variable importance and interactions jointly using colour scale to represent posterior uncertainty. Our new Visualisations are designed to work with the most popular BART R packages available, namely BART, dbarts, and bartMachine. Our approach is implemented in the R package bartMan (BART Model ANalysis).

Spectrophotometric evaluation of color stability of composite resin after exposure to cold drinks: An in vitro study.

The aim of this study was to evaluate the color stability of two composite resins after exposure to beverages such as Cola, Pepsi, Red Bull, and distilled water after 15 days. The color stability of a microhybrid and nanohybrid composite was evaluated after storage in distilled water, Coca-Cola, Pepsi, and Red Bull for 15 days. Color measurement was done using a reflectance spectrophotometer based on the CIE L*a*b* color scale. All tested resin composites showed color change after a period of 15 days. One-way analysis of variance and Tukey post hoc were done to assess the significance of color change within the group and an independent t-test was done to assess the change between micro and nanohybrid composite. Among the resin composites studied, microhybrid composite was found to be more color stable. The microhybrid and nanohybrid composite discolored most in Coca-Cola and Pepsi. In both groups, distilled water showed very less color change. Every endeavor should be undertaken to minimize the potential for discoloration in composite restorations by employing meticulous polishing techniques and also to use newer composite material with submicron particles. Furthermore, it is imperative to educate patients about the likelihood of the restoration being susceptible to staining from various beverages.

Achilles Tendon Stiffness in the Etiology of Sever Disease: A Shear Wave Elastography Study.

Sever disease is one of the most common causes of heel pain in growing children and adolescents. There is no consensus about etiology of Sever disease. The study comprised 41 participants aged 8 to 13 years who visited the orthopedic outpatient clinic: 17 patients with Sever disease and 24 asymptomatic children. The middle third segment of the body of the Achilles tendon and the calcaneal insertion zone were separately assessed. Five measuring points for the quantitative value of each point were randomly selected. The color scale used in the Young's modulus shows the lowest values in blue and the highest values in red. The mean values were used for the statistical analysis. Less elasticity was detected at the insertional site for the control group (4.02 kPa versus 3.65 kPa), the situation was reversed in the body of the Achilles tendon and the elasticity of the study group was less than that of the control group (241.0 kPa versus 260.5 kPa). However, no statistically significant difference was found between the groups. In conclusion, no difference was found in Achilles tendon elasticity between patients with Sever disease and healthy individuals in both the tendon body and the calcaneal insertionof the tendon. Achilles tendon elasticity has not been found to play a role in the etiology of Sever disease.

Ocean-colour anomalies quantified by the human eye.

Phytoplankton turn seawater green when their concentration increases. This allows us to monitor them using ocean colour. However, as the spectral properties of phytoplankton and their relationship with other coloured substances in seawater vary, subtle differences (anomalies) in ocean colour occur that can cause large errors in estimates of phytoplankton abundance. Identifying and understanding these anomalies is required to interpret ocean-colour data properly, but not all scientists have access to, or can afford, the in-situ instrumentation needed to do this. We show that practical, low-cost tools developed in the 19th century (a Secchi disk and Forel-Ule colour scale) can be used to quantify a colour anomaly in the Weddell Sea. Our findings imply that ocean-colour anomalies can be identified using affordable methods. Furthermore, records collected over the last century may contain clues on how ocean ecosystems have changed with climate.

Distribution and Characteristics of Blackwater Rivers and Streams of the Contiguous United States.

Blackwater rivers and streams have stained or tea-colored water from tannins released by decaying plant matter. Natural conditions in these waters often differ from non-blackwater systems. For example, the pH and oxygen levels in waters can be very low, but completely natural. We examined an existing USEPA data set and found that blackwaters existed across the contiguous United States but were most common in the east. Water chemistry showed differences between blackwater and non-blackwater sites, but differences were not consistent across ecoregions making national scale generalizations difficult. Physical habitat data analysis did not show dramatic differences between blackwater and non-blackwater sites. Blackwater typically arises from streams that drain tannin-rich bogs/muskeg and wetlands, so as expected blackwater sites had a shorter Euclidean distance to wetlands than non-blackwater sites and existed in watersheds with a higher percentage of wetland habitat. Blackwaters in Northern and Temperate Plains tended to have higher acid neutralizing capacity, conductivity, and lower True Color; a visual color scale used for water purity. We posit that differences were because Color and Dissolved Organic Carbon at these sites were from buried wetland deposits rather than contemporary wetland habitats. Research needs that may increase our understanding and management of blackwaters include development of an operational definition that includes a classification framework and reference conditions for different blackwater types, identification of stressors and their associated dynamics that negatively impact blackwater systems, and development of data-driven, consistent, and repeatable assessment methods, including development of targets, protective of unique conditions in blackwater rivers and streams.

Investigation of color protection of laminated glass by UV-blocking interlayers for conservation application

The damaging of color pigments under UV radiation, usually called fading, is known, the most common is the loose of color intensity of clothes. A high UV-resistance of window and façade glazing is urgent for the conservation and preservation of historical exhibits and interiors. In this contribution, a long-lasting natural weather testing of several glass types, mostly LSG with different interlayer materials, and the effect of the different color patterns of paper and textile specimens are presented. According to the Harrison damage function, the initial damage level starts at 500 nm wavelength. Therefore, besides standard PVB-interlayer (UV-blocking from 360 to 380 nm wavelength) also special UV-blocking interlayer (UV-blocking from 400 nm) are part of the study. The research was conducted over the full summer of the year 2021. The assessment of the fading effect was measured as color spacing according to the CIELAB color space and verified by human eye perception. The CIELAB color space is the most used color system and combines brightness, yellow-blue and red-green tones. The research shows a significant effect of different glass build-ups on the color spacing value, especially for medium-sensitive pigment papers and textiles. Furthermore, the color shifting of single color scale samples showed demonstrated the limitation of the color spacing value of the CIELAB color space versus the human eye perception.

Modified FMEA for risk management in geotechnical structures during hydraulic circuit filling of a hydroelectric power plant

This article presents an approach centered on a modification of the Failure Modes and Effects Analysis Method (FMEA) for risk management concerning geotechnical structures during the hydraulic circuit filling process within a hydroelectric power plant. In this work, the conventional FMEA method, typically employed in various projects and processes, was adapted through the development of specific classification criteria. The primary objective was to enhance the applicability of this method to geotechnical structures during the filling procedure. The validity of this method was confirmed through its application in a case study. This analysis suggests that the newly devised scoring tables have streamlined the risk analysis process by reducing the number of classification categories and adopting a color scale. In addition to their role in classifying failure modes, these tables also serve as a guide for mitigating the risks associated with the filling procedure. The appropriate course of action is determined based on the specific aspects presented in the analyzed geotechnical model. It is our belief that the insights generated by this research will offer valuable support to technical professionals responsible for hydraulic circuit filling in hydroelectric projects. This support aims to enhance the safety of this activity by minimizing the severity of failures and increasing the probability of their detection.

Efficacy and safety of fractional microneedle radiofrequency for atrophic acne scars: A real-world clinical study of 126 patients.

To analyze the clinical efficacy and safety of fractional microneedle radiofrequency (FMR) for facial atrophic acne scars in a real-world setting. The clinical data of patients with atrophic acne scars who had received FMR therapy from February 2018 to August 2022 were retrospectively analyzed. The improvement of atrophic acne scars was assessed using the ECCA Grading Scale (échelle d'évaluation clinique des cicatrices d'acné), Global Aesthetic Improvement Scale (GAIS), and modified Manchester Scar Scale (mMSS). Adverse reactions during FMR treatment were also recorded. Univariate and multivariate logistic regression analyses were performed to evaluate the efficacy and safety of FMR for atrophic acne scars. A total of 126 patients with facial atrophic acne scars were included. A total of 590 FMR treatment sessions were accomplished, with each of 82 patients receiving 4 or more treatment sessions, and 1 receiving a maximum of 14 sessions. All patients showed improvement in symptoms after FMR treatment, with moderate to significant improvement (ECCA score reduction of 26%-100%) in 92 (73.0%) patients. As the number of treatment sessions increased, the ECCA score gradually decreased from an average of 85.6 before to 35.0 after FMR. The average scores for distortion, color, and visual analogue scale (VAS) of mMSS all showed certain reductions. The change in GAIS score indicated improvement after treatment, with minimal improvement in 16 patients (12.7%), good improvement in 57 patients (45.2%), significant improvement in 45 patients (35.7%), and optimal improvement in 8 patients (6.4%). The univariate and multivariate logistic regression analyses revealed that the long pulse width and the number of FMR treatment sessions were positively associated with clinical efficacy. Compared to the short pulse-width group (200 ms), the longer pulse-width group (300 ms) (odds ratio [OR] = 8.3, p = 0.003) and the even longer pulse-width group (400-500 ms) (OR = 52.6, p < 0.001) demonstrated stronger efficacies. Patients who received more than three treatment sessions had better outcomescompared to those who received three or fewer treatment sessions (OR = 4.0, p = 0.036). All patients experienced posttreatment transient erythema, but no crusting, infection, or blister. Six cases developed grid-like erythema around 1 month posttreatmentand one case experienced hyperpigmentation, both of which resolved within 1-3 months after appropriate management. FMR is a safe and effective treatment modality for improving facial atrophic acne scars, and the number of FMR treatment sessions and pulse width are associated with clinical efficacy.

The use of color-changeable chewing gum in evaluating food masticability

Key summary pointsAimOur study aimed to examine the validity and reliability of visual measurement by assessing chewing gum color, using an existing color scale compared to that assessed using a colorimeter to determine masticable foods.FindingsThe assessment of masticatory performance by the color scale was in agreement with that by colorimeter. The inter-rater reliability was also high.MessageVisual inspection using a color scale makes it possible to determine masticable food without the use of a colorimeter.

Sensitivity of Mass Geometry Parameters on E-Scooter Comfort: Design Guide.

E-scooter vibrations are a problem recently studied. Theoretical models based on dynamic simulations and also real measurements have confirmed the high impact of e-scooter vibrations on driver comfort and health. Some authors recommend improving e-scooter damping systems, including tyres. However, it has not been suggested nor has any research been published studying how to improve e-scooter frame design for reducing driver vibrations and improving comfort. In this paper, we have modelled a real e-scooter to have a reference. Then, we have developed a multibody dynamic model for running dynamic simulations studying the influence of mass geometry parameters of the e-scooter frame (mass, centre of gravity and inertia moment). Acceleration results have been analysed based on the UNE-2631 standard for obtaining comfort values. Based on results, a qualitative e-scooter frame design guide for mitigating vibrations and increasing the comfort of e-scooter driver has been developed. Some application cases have been running on the multibody dynamic simulation model, finding improvements of comfort levels higher than 9% in comparison with the e-scooter reference model. The dynamic model has been qualitatively validated from real measurements. In addition, a basic sensor proposal and comfort colour scale is proposed for giving feedback to e-scooter drivers.

Accuracy of newly developed color determination application for masticatory performance: Evaluating color-changeable chewing gum.

Color-changeable chewing gums are used to evaluate masticatory performance, as measured by a colorimeter or visually based on a color scale. Although anyone can use a color scale, the evaluation accuracy depends on the evaluator. We develop an application that can determine the degree of color change in chewing gum using smartphone images, making color evaluation accurate and easy to measure. For the application, 60 chewed gum samples were prepared. Two shots were captured using two smartphone models. To create the application algorithm, a formula was developed to approximately map the color value from the smartphone images to the true value using a colorimeter. A basic validation was performed on 60 new samples covering a range of colors, followed by a field validation on 100 healthy dentate participants aged 20-39 years. The intraclass correlation coefficient for two repeated shots had a high value ≥ 0.97 in the basic and field validations, confirming reliability. No significant differences were observed in the paired t-test and Wilcoxon signed-rank test, and a significant and strong correlation (correlation coefficient ≥ 0.92) was observed between the evaluation values using the colorimeter and the basic and field validations. Bland-Altman plots further confirmed the validity of the application. A software application was developed to enable easy, quick, and accurate determination of the masticatory performance of a chewing gum from images taken using a smartphone with highly reliable and validated results.

Особливості вивчення колірної гами та колірної тональності зі студентами мистецьких ЗВО

The article is devoted to the actual problem of training specialists in fine and decorative arts, in particular, the study of painting and color science by students of higher primary institutions. The author examines such basic concepts of visual literacy as color gamut, color tonality and the peculiarities of their study by future artists. It was found that the problem of studying the characteristics of color by students of art universities is not sufficiently presented in modern science. However, in teaching painting and color science, it is important to form a holistic perception of color in students, to understand tone, the shape of objects through color, the ability to create color harmonies, mastering the plane of the work, and the ability of students to convey their ideas to the viewer by means of color. It is emphasized that in painting classes, students of art universities get acquainted with the basic concepts of color science – color gamut and color tonality – from the very first classes. Various characteristics of color, common and different in the concepts of “color gamut” and “color tonality” have been studied. Examples of practical tasks are given that contribute to the best possible study of the color gamut and color tonality by future artists. It is emphasized that the color scale and color tonality are one of the main tools for creating an image in artistic works and are used by artists depending on the author's intention. It is emphasized that the variety of color gamuts and tonalities in painting depends on the saturation, lightness, lighting of objects, arrangement of colors in the composition, etc. It was found that solving the issues of color contrast, the harmonious system of color series, the ratio of colors in color gamuts, and color tonality by students of art universities will help in the future in practice to use the acquired knowledge for the high-quality performance of one’s own artistic works.

Preparation of hydrophobic layered double hydroxide-based composite pigments via octyltriethoxysilane surface modification for cosmetic applications.

Pigments play a pivotal role in the cosmetic industry, in which the development of pigments with concurrent color diversity, hydrophobicity, biocompatibility and photostability remains a great challenge. Herein, we report organic-inorganic composite pigments synthesized via a combination of organic dye anions (Ponceau SX and acid green (AG)), layered double hydroxides (LDHs) and octyltriethoxysilane (OTEOS) (denoted as O/Dye-LDHs: O/SX-LDHs and O/AG-LDHs).The prepared composite pigments were characterized via a comprehensive investigation based on X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS-mapping), Fourier transform infrared (FT-IR) spectroscopy, CIE 1976 L*a*b* color scales, static contact angle measurement and HET-CAM assay. The results confirm the successful intercalation of organic dye anions into the interlayer region of LDHs via host-guest interactions and the surface modification of OTEOS on the layer surface, forming a new kind of hydrophobic organic-inorganic composite pigment with a sandwich structure. LDH layer protection and OTEOS coating play crucial roles in the high photostability, good hydrophobicity and satisfactory biocompatibility of pigments. In addition, O/Dye-LDHs exhibit rich color and color adjustability. Impressively, we applied mixture composite pigments with different O/SX-LDH-to-O/AG-LDH ratios to formulate an eye shadow cream, which present a series of popular and natural colours with water resistance to enhance one's attractiveness and appearance. This work provides a promising strategy for the design of safe and efficient composite pigments, demonstrating their potential application in the field of makeup.

Sample design in biodiversity studies matters: a fine-scale study of Lawrence's velvet worm, Peripatopsis lawrencei (Onychophora: Peripatopsidae), reveals hidden diversity.

A fine-scale phylogenetic and phylogeographic analysis of Peripatopsis lawrencei s.l. was conducted with both mitochondrial and nuclear DNA sequence data, using both external morphology and scanning electron microscopy of taxonomically important characters. A total of 119 sequences were used for the mitochondrial cytochrome c oxidase subunit I (COI ) whereas a single representative specimen from each locality was sequenced for the nuclear 18S rRNA locus. Phylogenetic analyses were conducted on the total COI data set and the combined COI + 18S rRNA data set using a Bayesian analysis and maximum likelihood analyses. For the combined DNA sequence data set, a divergence time estimation was further undertaken in BEAST and specimens placed in a phylogenetic framework including all the described Peripatopsis species from South Africa. In addition, a phylogeographic study was conducted exclusively on P. lawrencei s.s. (clade A) using an analysis of molecular variance and haplotype network. Phylogenetic results indicated that, at the Oubos sample locality, two highly distinct genetic lineages were present (clades A and B), whereas a divergence time estimation suggests a Miocene cladogenesis of the novel Oubos lineage. Marked phylogeographic structure was observed for P. lawrencei s.s. (restricted to clade A) across the distribution range with limited maternal dispersal. Morphologically, the two sympatric lineages at Oubos A and B differed in leg pair number, ventral colour and dorsal scale rank counts, as evident from scanning electron microscopy. Our results support the recognition of a distinct species that occurs in sympatry with P. lawrencei s.s. The new species, P. aereus sp. nov. (clade B) is described and the implication for fine-scale taxonomic studies on saproxylic taxa is discussed. ZooBank: urn:lsid:zoobank.org:pub:AB6E0BDA-7B5F-4FD3-A863-BA7C814E278C.

Comparison of Signal to Noise Ratio of Colored and Gray Scale Image in Clustered Condition From the Contours of the Images With the Help of Different Image Filtering Method

Comparison of Signal to Noise Ratio of Colored and Gray Scale Image in Clustered Condition From the Contours of the Images With the Help of Different Image Filtering Method