Gamut Research Articles

High-efficiency pure-red perovskite quantum dots glass via Dy modification for high quality backlight display

Perovskite quantum dots (QDs) glass has been considered as high efficiency, high color-purity, and high stability luminescent materials for display application. Herein, high emissive Dy doped CsPb(Br, I)3 (CPBI: Dy) QDs glass has been prepared, and the effects of doping concentration on the crystallization behavior of QDs were discussed carefully. The low and high concentration of Dy doping brings diametrically opposite tuning effects for the emission wavelength. When high Dy doping, DyBO3 nanocrystals were precipitated from the glass along with CPBI QDs. The highest photoluminescence quantum yield of CPBI: Dy QDs glass reached 53.79 %. The LEDs using the CPBI: Dy QDs glass as color converter could express pure-red light of 630 nm peak with a full width at half maximum of only 25.6 nm. What’s more, the color gamut of a white backlight unit based on prepared CPBI: Dy QDs glass film was 125.8 % of National Television System Committee color gamut standard and 94.0 % of Rec.2020, which has great potential in display application.

Redefining artificial lighting through spectral engineering of light sources for well-being

Light-emitting diodes (LEDs) have revolutionized artificial lighting, but also exposed the detrimental health effects that stem from insufficient exposure to natural light. Human-centric artificial lighting requires both visual quality and circadian lighting performance that mimics daylight’s evolving spectral power distribution (SPD). Here, we present a color-tunable LED-based light source that achieves SPDs similar to various conditions of daylight and incandescent lighting over the range of visible wavelengths. This light source is comprised of a linear combination of light converter channels containing dyes exhibiting thermally activated delayed fluorescence (TADF) fabricated through additive manufacturing, photoexcited by violet-emitting LEDs (VLED). This hybrid light source establishes a new benchmark for state-of-the-art artificial lighting at approximating daylight, with Illuminating Engineering Society (IES) color gamut index Rg values within 3%, IES color fidelity index Rf values within 7% through CCT values ranging from 4277 K to 22,333 K. We propose efficiency metrics to accurately quantify similarity between light sources and the respective reference daylight spectrum encompassing visual and circadian effects, facilitating WLED benchmarking. The efficiency metrics pertaining to circadian lighting performance remain within 10% over the same CCT range. These results advance lighting science to address simultaneously the grand challenges of health and sustainability.

Shadow effect in dual‐source thermally evaporated perovskite patterns

AbstractPerovskite light‐emitting diodes (PeLEDs) have recently emerged as a potential next‐generation display technology due to their wide color gamut, high external quantum efficiency (EQE), and low fabrication cost. The thermal evaporation process with no solvent involvement and offers low substrate selectivity and high compatibility with production lines has attracted significant academic interest. However, in thermal evaporation processes, the shadow effect greatly affects the deposition size and positioning accuracy of the patterns, consequently impacting the effective device area and process repeatability of PeLEDs. In this study, we calculated the shadow distance during the dual‐source thermal evaporation and analyzed the issues of misalignment and size deviation caused by shadow effects. Based on the calculation of shadow distance, we increased the substrate height from 33 to 38 cm to enhance the deposition angle. This adjustment led to an improvement in the characteristic parameter W1/Wdot from 0.178 to 0.365 during perovskite deposition. As a result, we successfully obtained a high‐resolution perovskite array with uniform morphology and photofluorescence (PL) emission at 600 pixels per inch (ppi). This demonstrated the reliable calculation and analysis of shadow distance, which is effective for fine deposition of high‐resolution perovskite patterns and PeLEDs.

Large-scale high purity and brightness structural color generation in layered thin film structures via coupled cavity resonance

Abstract Structural colors, resulting from the interaction of light with nanostructured materials rather than pigments, present a promising avenue for diverse applications ranging from ink-free printing to optical anti-counterfeiting. Achieving structural colors with high purity and brightness over large areas and at low costs is beneficial for many practical applications, but still remains a challenge for current designs. Here, we introduce a novel approach to realizing large-scale structural colors in layered thin film structures that are characterized by both high brightness and purity. Unlike conventional designs relying on single Fabry–Pérot cavity resonance, our method leverages coupled resonance between adjacent cavities to achieve sharp and intense transmission peaks with significantly suppressed sideband intensity. We demonstrate this approach by designing and experimentally validating transmission-type red, green, and blue colors using an Ag/SiO2/Ag/SiO2/Ag configuration on fused silica substrate. The measured spectra exhibit narrow resonant linewidths (full width at half maximum ∼60 nm), high peak efficiencies (>40 %), and well-suppressed sideband intensities (∼0 %). In addition, the generated color can be easily tuned by adjusting the thickness of SiO2 layer, and the associated color gamut coverage shows a wider range than many existing standards. Moreover, the proposed design method is versatile and compatible with various choices of dielectric and metallic layers. For instance, we demonstrate the production of angle-robust structural colors by utilizing high-index Ta2O5 as the dielectric layer. Finally, we showcase a series of printed color images based on the proposed structures. The coupled-cavity-resonance architecture presented here successfully mitigates the trade-off between color brightness and purity in conventional layered thin film structures and provides a novel and cost-effective route towards the realization of large-scale and high-performance structural colors.

Anion regulation for surface passivation enables ultrahigh-stability perovskite nanocrystals.

All-inorganic perovskite CsPbBr3 nanocrystals (NCs) display high photoluminescence quantum yield and narrow emission, which show great potential application in optoelectronic devices. However, the poor environment stability of NCs will hinder their practical application. Herein, a series of ionic liquids with different anions (BF4-, Br-, and NO3-) were used as a sole capping ligand to synthesize NCs. Among the three samples, 1-hexadecyl-3-methylimidazolium tetrafluoroborate ([C16MIM]BF4) capped NCs have the highest stability in light, thermal, and water, possibly attributing to the in situ passivation of bromine vacancy via pseudohalogen BF4- and tight binding of ionic liquid ligands and lead atoms. In addition, green-emission [C16MIM]BF4 NCs were used to assemble a white light-emitting diode device, and it possessed a wide National Television System Committee color gamut of 124.5% and a stable emission peak at high driving currents of 380 mA. This work paves the way for resurfacing perovskite NCs with ultrahigh stability, thereby driving the perovskite NC display industry closer to real-world application.

Optimization study on circadian tunability and Rec. 2020 of RGB-LED-based displays considering the users with different ages

The reasonable design of spectral power distribution (SPD) of GaN-based light-emitting diode (LED) display becomes more and more important and popular. In this work, we perform an investigation on the circadian effects of three-primary (red R, green G, and blue B, also denoted as RGB) LED based self-luminous displays (such as emerging mini-LED or micro-LED based displays) considering the users with different ages. With the increment of peoples’ ages from 1 year to 100 years, the optical transmittance of humans’ eyes may decrease due to the aging of their body functions. Therefore, it is important and meaningful for performing a spectral optimization study on the circadian effects of light that is emitting from self-luminous LED-based displays for the users with different ages. Here, the melanopic efficacy of luminous radiation (MELR) is mainly used to evaluate the circadian effects of white light coming from RGB-LED displays. With the aid of multi-objective optimization genetic algorithm (MOGA), the maximum MELR and the minimum MELR value are separately obtained for the standard observers at the age of 32, while maintaining at a certain high color gamut of Rec. 2020 standard (i.e., 60 %, 70 %, 80 %, and 90 % Rec. 2020, respectively) for these LED-based displays. Then, an extrapolation of optimal SPD at the age of 32 is done to other ages. Another parameter that can be denoted as circadian stimulus (CS) is also calculated and discussed for different ages. It is believable that this work is helpful for guiding the design and fabrication of future RGB-LED-based displays in consideration of the users with different ages, meeting large requirements of human-centric lighting (HCL) in the future.

A Wide Color Gamut and Noniridescent Zinc-Anode Asymmetric Electrochromic Device for Self-Sustaining Color-Adaptive Bio-Camouflage System.

Inspired by camouflage-colored organisms, the development of bio-camouflage systems using electrochromic (EC) technology has gained significant interest. However, existing EC systems struggle with achieving a wide color gamut, noniridescent colors, and self-sustainability. Herein, a self-sustainable color-adaptive bio-camouflage system integrating EC and nanogenerator (NG) technologies, enabling environmental color adaptation, and thermal regulation without an external power source is proposed. The system is based on a zinc-anode EC device (ZECD) with an asymmetric structure, incorporating flexible tungsten oxide and vanadium oxide electrodes. During the EC process, tungsten oxide shifts between blue and transparent, allowing near-infrared thermal modulation, while the vanadium oxide transitions from yellow to transparent. This design enables reversible near-infrared modulation and noniridescent color conversion among black, blue, green, yellow, and transparent. For the self-sustainability of the system, an electromagnetic and triboelectric hybrid NG that collects biomechanical energy is developed. In a typical driven cycle, the integrated system transitions colors and achieves significant near-infrared spectral modulation, demonstrating environmental adaptability and thermal regulation. Experiments on human skin and simulated chameleon color changes further confirm the system's effectiveness. This work highlights the potential of integrating EC and NG technologies to advance color-adaptive camouflage systems, opening new an avenue for bio-camouflage design.

Dual-shell protection enables highly efficient and stable all-inorganic perovskite composites for light-emitting-diodes

Lead-halide perovskite nanocrystals (NCs) present superior photoelectric properties, but the poor stability seriously hinders their practical application. The encapsulation of perovskite NCs inside mesoporous silica (m-SiO2) matrix is considered as one of the most feasible pathways to improve the stability of NCs. However, the challenges of loose encapsulation structure, aggregation of particles, high energy consumption during the preparation of CsPbX3@m-SiO2 composites have not yet been overcome, which throw a shadow over the large-scale commercial applications. Here, we present a dual-shell encapsulation strategy that enables the formation of highly emissive CsPbBr3@m-SiO2@SiO2 composites, achieving an exceptional photoluminescence quantum yield (PLQY) of 97.37 %. The reaction parameters for the preparation of composites are meticulous investigated. The CsPbBr3 NCs can be well formed inside the pores of m-SiO2 as the m-SiO2 is introduced into the precursor solution. The secondary SiO2 shells can effectively seal the open pores of m-SiO2. As a result, the as-prepared CsPbBr3@m-SiO2@SiO2 composites present excellent stability, in which the composites can maintain 93.16 % of initial intensity after storage for 84 days. Besides, a series of CsPbX3@m-SiO2@SiO2 composites with tunable emission wavelength in the range of 428.6–630.6 nm are prepared through facile designing the halide ratios of precursor solution, which present a wide color gamut (148.48 % of the National Television Standards Committee). In addition, a white light-emitting diode (LED) is fabricated by combining CsPbBr3@m-SiO2@SiO2 composites and K2SiF6:Mn4+ phosphors with a 455 nm LED chip, which exhibits good photoelectric performances. This facile low-temperature dual-shell encapsulation strategy reported here provides a new pathway for preparing high-performance perovskite composites, facilitating their practical photoelectric application.

Mn2+ doped aluminum-rich spinel transparent ceramic phosphor with higher performance for wide color-gamut backlight display

Due to the great potential of narrow-band green-emitting phosphors for wide color-gamut white light-emitting diodes (WLED) backlight displays, there is great interest in finding host materials with the desired luminescent properties and high quantum efficiency. Herein, a series of Mg0.98-xAl2(1+x/3)O4: 0.02Mn2+ (x = 0, 0.125, 0.25) powders were synthesized using high-temperature solid-phase reactions, followed by a combination of pressureless sintering and hot isostatic pressure sintering to fabricate transparent ceramic phosphors. The crystal structure refinement, NMR spectroscopy, and photoluminescence results show tetrahedral coordination of Mn2+ ions and an increase in cation vacancies and disorder with increasing x. These transparent ceramics exhibit narrow-band green emission, which shifts from 523 to 520 nm with increasing x. The Mg0.855Al2.08O4: 0.02Mn2+ ceramic sample has an in-line transmittance of over 80 % above 500 nm and internal quantum efficiencies as high as 96.2 %. The luminous intensity of the Mg0.855Al2.08O4: 0.02Mn2+ ceramic remains above 88.6 % at 425 K compared to room temperature, with a thermal conductivity of 12.4 W·m−1·K−1. A WLED device fabricated using the Mg0.855Al2.08O4: 0.02Mn2+ ceramic, K2SiF6:Mn4+ phosphors, and a blue chip show a wide color gamut of 126 % National Television System Committee standard. The results show that Mn2+-doped aluminum-rich spinel transparent ceramics have great potential for application in wide color gamut WLED backlight devices.

Tunable MXene/WO3 Fabry−Pérot Microcavity Architecture for Bioinspired Soft Electrochromic Actuators with Vivid Colors

AbstractInspired by stimuli‐responsive creatures in nature, developing devices with synergistic color change and deformation will be of great value for realizing the adaptive variants. Yet, integrating adaptive color variation and deformation into a single device remains elusive. Herein, an intriguing electrochromic actuator based on MXene/WO3 bilayer film is developed with Fabry−Pérot (F–P) microcavity, which successfully integrates both functions of reversible deformation and vivid color variations into the same device. Upon applying a small electric field, the ion intercalation/de‐intercalation can synchronously alter the stress distribution and optical absorption of MXene/WO3, resulting in the dual response of electrochromic phenomenon and ultra‐fast deformation with a maximum angle of 95° within 10 s. Moreover, the F–P microcavity architecture with the physical light interaction additionally endows the bilayer film with a bright color gamut and high color tunability (yellow–green, purple, pink, blue, etc.). Furthermore, an asymmetric soft actuator based on MXene/WO3 bilayer film is assembled, which displays robust grasping ability and excellent cycling stability up to 1000 cycles. These findings may open new opportunities for somatosensory soft robots and next‐generation intelligent robots.

Ultrafast, Fano resonant colorimetric sensor with high chromaticity beyond standard RGB

Fast-responsive colorimetric sensors with a wide color gamut have garnered significant attention for real-time atmospheric monitoring observable to the naked eye. Although swelling medium-based Fabry–Perot cavities, which enable linear resonance shifts with high Q-factors, have been widely suggested, they face limitations such as a restricted color gamut within standard RGB due to subtractive colors and slow response times caused by the top layer blocking, delaying the swelling medium’s equilibrium time. Here, we present two-dimensionally nanostructured Fano resonant colorimetric sensors using a swelling medium with significantly improved responsiveness and color representation beyond standard RGB. The nanostructured Fano resonator is elaborately designed to transform the spectral line shape into a Lorentz state in terms of reflectance, resulting in additive color through controlled coupling parameters of the resonator systems. In addition, the nanostructuring of the surface provides direct channels to water vapors, ensuring fast and strong interaction with the swelling medium. Consequently, the fabricated sensor exhibits a wide color gamut, covering 141% of standard RGB and 105% of Adobe RGB, and demonstrates rapid responsiveness with response and recovery times of 287 ms and 87 ms, respectively.

Striking gold: study explores light resonance with layered metallic arrays

Overcoming the limitations of single gold nanostructures to expand color gamut

Quantitative analysis of the color accuracy and reproducibility in digital textile printing: Discrepancies within color reproduction media

In this study, the overall color reproducibility of a digital textile printing (DTP) process was investigated within a wide range of color gamuts, and the design color factors influencing color reproduction in the initial design stage of DTP were analyzed. During the DTP process, digital image samples, display samples, and fabric samples, each representing 1296 colors, were created. The color reproduction ranges of these samples and the discrepancies in their lightness, chroma, hue, and overall color were analyzed. It was found that the display samples exhibited the widest color reproduction range, particularly in terms of lightness and chroma. In contrast, the fabric samples showed the narrowest color reproduction range. Furthermore, it was shown that color reproducibility was significantly reduced when the medium transitions from display to fabric during the DTP process, with an average overall color difference of 24.34 Δ E*ab being detected between the display and fabric samples. The low color reproducibility of this DTP process was particularly influenced by the K ratio and the L*10 and C*ab,10 values of the initial design. More specifically, the K ratio and the L*10 value of the initial design imparted significant effects on the lightness reproducibility, whereas the C*ab,10 value of the initial design had a significant impact all on the lightness, chroma, hue, and overall color reproducibilities.

High color purity aluminate phosphor SryCa1-x-yAl12O19: xEu2+ for lighting and backlight display applications

In the context of the rapid advances in electronic information technology, the advancement of novel high-efficiency narrow-band blue phosphors represents a pivotal step in the advancement of high-quality liquid crystal displays (LCDs), as well as the development of white light-emitting diodes (WLEDs) with a reduced correlated color temperature (CCT). In this study, based on the sensitivity of Eu2+ emission to local environment, the alkaline earth aluminate material CaAl12O19 with high structural symmetry was selected as the matrix, and the symmetry of crystal structure was improved by replacing Ca2+ with Sr2+, the narrow-band emission of the phosphor is realized. The Sr0.9Ca0.09Al12O19: 0.01Eu2+ (SCAO: Eu2+) phosphor exhibited narrow-band emission with the full width at half maximum (FWHM) of 45.76 nm, and the colour purity of up to 95.46 %. Moreover, the internal quantum efficiency (IQE) of SCAO: Eu2+ has been demonstrated to reach 81.70 %. In addition, SCAO: Eu2+ phosphor, (Ba, Sr)2SiO4: Eu2+ phosphor, CaAlSiN3: Eu2+ phosphor, and 275 nm UVLED chips were combined to prepare white LED devices exhibiting a low color temperature (3733 K). The three-band LEDs of SCAO: Eu2+, β-Sialon: Eu2+ and K2SiF6: Mn4+ exhibited a colour gamut covering 84.75 % of the National Television Standards Committee (NTSC) standard. This indicates that the phosphor possesses the characteristics of a highly effective narrow-band blue-light-emitting substance with considerable potential for utilization in lighting and backlighting displays.

Enhancing Color Gamut with Wavelength‐Selective Polarization Modulation in Chiral Liquid Crystals

Enhancing Color Gamut with Wavelength‐Selective Polarization Modulation in Chiral Liquid Crystals

Direct Photopatterning of Colloidal Quantum Dots with Electronically Optimized Diazirine Cross-Linkers.

Colloidal quantum dots (QDs) with a wide color gamut and high luminescent efficiency are promising for next-generation electronic and photonic devices. However, precise and scalable patterning of QDs without degrading their properties and their integration into commercially relevant devices, such as digitally addressable QD light-emitting diode (QLED) displays, remain challenging. Here, we develop electronically optimized diazirine-based cross-linkers for nondestructive, direct photopatterning of QDs and, ultimately, building the active-matrix QLED displays. The key to the cross-linker design is the introduction of electron-donating substituents that permit the formation of ground-state singlet carbenes for air-stable and benign QD photopatterning. Under ambient conditions, these cross-linkers enable the patterning of heavy metal-free QDs at a resolution of over 13,000 pixels per inch using commercial i-line photolithography. The patterned QD layers fully preserved their optical and optoelectronic properties. Pixelated electroluminescent devices with patterned InP/ZnSe/ZnS QD layers show a peak external quantum efficiency of 15.3% and a maximum luminance of about 40,000 cd m-2, outperforming those made by existing QD patterning approaches. We further show the seamless integration of patterned QLEDs with thin-film transistor circuits and the fabrication of dual-color active-matrix displays. These results underscore the importance of designing photochemistry for QD patterning, and promise the implementation of direct photopatterning methods in manufacturing commercial QLED displays and other integrated QD device platforms.

Influence of UV irradiation on the luminescence properties of CsPbBr3 perovskite quantum dots and CsPbBr3 perovskite quantum dots/PVDF composite film—for white LED application

Perovskite quantum dots (QDs) have been widely investigated for their excellent properties such as high color purity in displays, tunable emission wavelength, and high photoluminescence quantum yield. For device applications, improving the stability is an area of interest. In this study, the effects of UV irradiation on the structural and luminescence properties of CsPbBr3 perovskite quantum dots (CPB QDs) excited at 365 nm were investigated. To overcome the effects of UV irradiation, a CPB QDs/PVDF composite flexible film was prepared. It exhibits high structural and optical stability under UV irradiation and emits a highly intense green color. The emission wavelength and intensity were observed for three years, and the stability of the temperature-dependent emission intensity up to 400 K has been reported. In addition, it is stable in water. A white LED, fabricated by integrating a blue LED with CPB QDs/PVDF composite film and red phosphor, produces bright natural white light [(CIE x, CIE y) = (0.3704, 0.3611), and CCT = 4177 K] with a color gamut area coverage of 86.4% of the standard NTSC (1953) color space.&#xD.

Elevating Red Emission: Yb3+ Doped CsPbBr1I2 Nanocrystal Glass for Exceptional PLQY and Stability in Wide Color Gamut Backlit Displays

As display technologies progress towards enhanced visual performance, there was a growing demand for color conversion materials to meet increasingly stringent performance requirements. In recent years, all-inorganic perovskite CsPbX3 (X = Cl, Br, I) nanocrystals (NCs) had gained attention in the field of wide color gamut backlight displays due to their tunable full spectrum, narrow-band emission, high color purity, and ease of processing. However, red-emitting perovskite NCs were still facing challenges with photoluminescence quantum yield (PLQY) and stability. In this study, Yb3+ doped CsPbBr1I2 perovskite nanocrystal glass (Yb3+@CsPbBr1I2 PNG) was synthesized using a melt-quenching technique. Samples emitting at a narrow band centered at 630nm, with a full width at half maximum(FWHM) of 31.8nm, exhibited a high PLQY of 80.36% and retained fluorescence intensity at 98.2% of the initial value in water, maintaining to 92.6% after continuous blue light irradiation for 60 days. Moreover, the optical conversion film Yb3+@CsPbBr1I2@CsPbBr3@PET developed in our study showcased color gamut coverage surpassing 132.9% of the NTSC 1953 standard and 98.8% of the Rec.2020 standard. In summary, the highly efficient and remarkably stable red-emitting Yb3+@CsPbBr1I2 PNG composite material introduced in this study paved the way for future advancements in wide color gamut and ultra-high definition backlight display technologies.

Improving the color gamut of gold nanostructures using vertical tandem nano-disks

Metallic nanoparticles have been used in structural coloration applications since they provide an alternative for the synthesis of color filters, with extended color gamut, enhanced color saturation, and brightness. These optical properties can be further improved when integrating nanoparticles into coupled dimers that give rise to enhanced hybridized plasmon resonances. In this contribution, gold nano-disks are split into Au/SiO2/Au layered structures to enhance its plasmon resonances and evaluate its improved performance as reflective color filters. To do so, the reflectance spectra of the layered disks were obtained with numerical simulations, identifying high amplitude peaks in the visible band and low-amplitude peaks in the near infrared one, related to the hybridized resonances. By choosing the appropriate size of the intermediate dielectric and metallic layers, as well as the near-field coupling, peaks can be tuned along the visible and near infrared bands, respectively. The chromatic coordinates of the addressed nanostructures obtained from the reflectance spectra show that the nanostructures hold color gamut that extends toward magenta, orange, yellowish, and reddish shades of colors.

Structural determination, energy transfer and color-tunable photoluminescence of stable LiYSiO4: Ce/Tb/Sm Phosphors toward nUV pumped wLEDs application

Study on photon emission of Ce3+-doped phosphors is essential for advanced optoelectronic application. However, it remains quite difficult to design near-ultraviolet excitable Ce3+-activated silicate blue/cyan-emitting phosphors because of the combined influence of iconicity of Ce3+, crystal field strength, and nephelauxetic effect. Herein, Ce3+ incorporated into a proper host LiYSiO4 (LYS) phosphor is mechanistically investigated and shown efficient blue/cyan photoluminescence (PL) owing to Ce3+ 5d1 electronic state experiencing appropriate crystal field splitting. The comprehensive analysis based on structural refinement, dynamic/static spectra, and density functional theory calculations indicates that Ce3+ ions are energetically favored in octahedral Y site as compared with Li site in the host, resulting in attractive PL properties. According to the principle of color superposition and via cascading energy transfer (ET) from Ce3+ → Tb3+ → Sm3+, systematic PL tuning in a large color gamut is realized by further codoping with the green- and red-emissions of Tb3+ and Sm3+ in the phosphor LYS: Ce3+/Tb3+/Sm3+. The direct ET from Ce3+ → Sm3+ is difficult to occur due to the metal-metal charge transfer effect. Of note, the PL thermal-quenching of Ce3+ is mainly associated with multiphonon relaxation, while the quenching of Tb3+/ Sm3+ is primarily due to the cross relaxation (CR) process via dipole-dipole (d-d) interaction. The appropriate distance between the two nearest adjacent Y sites in the host together with the ET are conducive to weaken the CR process of Tb3+/Sm3+, leading to high PL efficiency. Finally, a prototype pc-wLED assembled via a remote ‘capping’ packaging strategy and by using only the stably composition-optimized white-emitting LYS: Ce3+/Tb3+/Sm3+ demonstrates that the phosphor is promising for high-quality of light.