Color Tone Research Articles

The Relationship between Color Preferences and Consumption Behaviors: Investigation of Afternoon Tea Consumers

ABSTRACT With the improvement of living standards, afternoon tea culture has developed into a popular lifestyle; and it is also a derivative of a new way of cultural meaning and life-style in Taiwan. In recent years, more and more consumers pay high attention to dining atmosphere of afternoon tea restaurants. This study amends the M-R environmental psychology model to explore the influences of color preference on consumption emotions and consumer behavior of afternoon-tea consumers. After empirical investigation, it was found that consumers preferred colors of afternoon tea restaurants have significant impact on both positive and negative emotions, and emotions can have positive correlation with consumption behaviors. Therefore, recommendations for restaurateurs are as follows: different color tones can be target-designed for different afternoon-tea restaurant segmentations, different color combinations can be added into design considerations, and further understanding of establishment of color preference rankings in terms of different residential areas can be important.

Visual monitoring of silver ions and cysteine using bi-ligand Eu-based metal organic framework as a reference signal: Color tonality

Multicolor visual sensing approach significantly improves accuracy, reproducibility and detection rate of targets. Herein, a novel red emitter bi-ligand Eu-based metal organic framework (BiL-Eu-MOF) was successfully synthesized using a one step solvothermal method and was evaluated as a reference signal for multicolor visual-based ratiometry detection. The synergistic effects offered by the double ligand and Eu significantly showed red shift excitation towards many cations and anions and fluorescence stability at least for 6 months. As a fluorescent multicolor-visual probe, selective blue emitter carbon dots to Ag+ ions were encapsulated into the pores of the red emissive of BiL-Eu-MOF to form blue-purple color. Addition of Ag+ ions changed emission color from blue-purple to red, while addition of cysteine (Cys) restored the original blue-purple color. Employing RGB analysis using smartphone, the detection mode showed good linearity of Ag+ and Cys in the range of 0–660 and 0–405 μM with limit of detection of 2.1 and 0.15 μM, respectively. Ultimately, our probe was applied for the quantification of silver ions in water samples and Cys in human serum samples showing excellent accuracy and precision.

Color-matching techniques for creating esthetic hand and finger prostheses.

Color matching is a critically important part of, and by far, also the most challenging aspect of producing esthetic silicone prosthesis. There is a knowledge gap in the literature and a lack of opportunities for training in the expertise, particularly regarding color-matching techniques. This article details a color-matching technique that is able to achieve life-like coloration in esthetic prosthesis. Each prosthesis is molded in an outer and inner layers of silicone tinted to different shades and opacities incorporating an intermediate touch-up layer to reproduce the detailed coloration of the hand (because of the presence of veins, finger joint/dermal pigmentations, a vascularized nail bed, and pinkish palm). This method of color-matching prosthesis combining intrinsic and extrinsic techniques simulates the layered anatomy and optical properties of the human skin to effectively replicate its esthetic and life-like coloration. Technical tips for achieving an accurate color match to the patient's skin, including pigment formulation adjustments for a tanned vs. a fair skin, and for painting the touch-up details are discussed. Methods for modifying the color tones of completed prosthesis and for minimizing metameric color differences when the prosthesis is viewed under different light sources are also presented. The technique is instrumental in achieving good outcomes for life-likeness and esthetic coloration in the prostheses fitted at our center. Studies previously published that investigated patients' evaluation of important esthetic characteristics of their prosthesis after a period of adjustment to fitting have shown a generally high level of patient satisfaction.

Beyond objective measurements: Danish nurses' identification of hospitalized pediatric patients at risk of clinical deterioration – A qualitative study

PurposeWhile the use of Pediatric Track and Trigger Tools as a standard to discriminate high level of urgency in pediatric care has received considerable attention, less focus has been given to other important factors such as nurses' clinical observations and judgement. The purpose of this study was to explore nurses' observational practice and focus on which non-measurable signs and symptoms nurses find important when identifying inpatient pediatric patients at risk of clinical deterioration. Design and methodsThis was an inductive qualitative study based on an interpretive description methodology. Data were obtained through participant observation of experienced nurses working in a Danish pediatric unit and focus group interviews with pediatric nurses. Field notes were taken, and focus group interviews were audio taped and transcribed. A thematic text condensation method was used to analyse data. ResultsFindings revealed the following four main themes of non-measurable signs and symptoms that nurses find important when identifying children at risk of clinical deterioration: Colour and skin tone; sounds; movement patterns; behavioural signs. ConclusionsThis study suggest that pediatric patients show signs and symptoms that go beyond the objective measurements integrated in Pediatric Track and Trigger Tools and they should not be ignored as they are highly valuable to nurses who are responsible for observing inpatient pediatric patients at risk of clinical deterioration. ImplicationsMore empirical research on nurses' observational practice is recommended, especially research to identify the signs and symptoms - both measurable and non-measurable – that are significant to nurses at the bedside.

Cost-effective test-bed for secure visible-light communication

This study presents a real-time hardware implementation of a novel physical layer security algorithm developed for visible-light communications (VLCs) based on precoded spatial modulation (SM). The demonstration was carried out on a low-cost 70 cm × 40 cm × 40 cm miniature room model with four light-emitting diodes (LEDs) as a test-bed for conducting experiments in the field of VLC. The test-bed is a 10:1 shrunk replica of a conventional room and can be built with simple office supplies totaling <$10, excluding drive and collection optoelectronic components. While being cost-friendly, the test-bed also allows for (i) integrating optical components and (ii) carving desired window and door patterns with different cardboard color tones. Hence, the effects of reflections from different colored walls and the effect of external light sources can be observed on the performance of the secure VLC system. We successfully demonstrate the operation of the zero-forcing precoder and the SM on the built set up to provide robust and secure communication among the transmitting LEDs and the receivers, representing the legitimate user and the eavesdropper, for the first time in the literature. The secrecy capacity improvement is also noted, validating the proposed approach in realistic environments.

GAN‐based tone curve learning for colour transfer

A new approach for reflecting the colour tone of a reference image on the input image is proposed. Depending on the source and reference image pairs, conventional statistical colour transfer methods often lead to undesirable colour transfer. Conversely, deep learning methods depend on prior learning, which results in unnatural output images when inappropriate images are learned; moreover, in such situations, analysing what kind of colour transformation has actually been performed is difficult. This state of the art motivates the proposal of a new colour transfer method that estimates tone curves based on generative adversarial nets. This method does not require any data set other than input and reference images, thus enabling a more appropriate colour transfer. The superior output of the proposed method compared with some baseline approaches is demonstrated through experiments.

Real-Time Assessment of Free Flap Capillary Circulation Using Videocapillaroscopy.

Free tissue transfer is a common method of reconstruction for various surgical defects. Many clinical assessment methods, including flap color monitoring and capillary refill time measurements, are commonly used to assess the microcirculation of the flap, yet there is no objective tool available that can clear real-time visualization of the flap microcirculation. The purpose of this study was to use a novel videocapillaroscope to evaluate the circulation changes on free flap skin surfaces while purposely clamping pedicle vessels. Ten patients who underwent free flap transfer for head and neck cancer from November of 2019 to June of 2020 were included in the study. Videocapillaroscopic observation was performed after flap elevation, and changes in the flap skin capillary circulation with artery-controlled and vein-controlled clamping were recorded. Average total surgery time was 517.91 minutes (SD, 73.3 minutes), average flap elevation time was 102.9 minutes (SD, 18.3 minutes). When the pedicle artery or vein was purposely clamped, the movement of red blood cells in blood vessels stopped; when clamps were removed after 60 seconds, the restoration of red blood cell movements was rapidly observed. When the pedicle artery was clamped, the number of visualizable blood vessels decreased and flap color became relatively white. When the pedicle vein was clamped, the number of visualizable blood vessels increased, and flap color tone had a tendency toward red. Novel videocapillaroscopy can be utilized for objective real-time flap monitoring by directly visualizing flap skin capillary microcirculation. Therapeutic, V.

Pomegranate (Punica granatum L.) Peel Flour as Functional Ingredient for Chorizo: Effect Physicochemical and Sensory Characteristics of Functional Meat Products

Abstract Functional meat products are necessary to improve the health of consumers without detrimental effects on high biological value protein consumption. The incorporation of natural antioxidants and dietary fibre from agro-industrial coproducts is a good alternative to improve the nutritional characteristics of meat products. Pomegranate peel flour was employed as a functional ingredient to replace part of the fat, in a raw meat product like chorizo, determining changes in instrumental colour and texture, sensory acceptation, and neophobia. Pomegranate peel flour presented high content of polyphenols with considerable antioxidant activity, and high content of dietary fibre as well. Fibre retained moisture, decreasing water activity of the chorizos, decreasing pH during storage. Pomegranate peel flour increased the colour tone of the chorizos and decreased colour intensity, with a tough but easy to crumble texture. Sensory acceptation of chorizos with pomegranate peel flour was higher than control, although taste and texture were scored lower than the control sample. Results show that incorporation of pomegranate peel flour decreased Aw and pH, besides increased the samples luminosity and tone. Chorizo with pomegranate peel flour were harder than control. Nonetheless, as a functional ingredient improved health benefits with a positive consumers’ acceptance, non-neophobic, particularly in older consumers (40-50 years old). Pomegranate peel flour is a viable ingredient in the formulation of functional meat products.

Chemical Changes and Environmental Issues of Heat Treatment of Wood

The paper gives an overview of chemical changes during heat treatment of wood and their influence on environment. Wood is one of the most used building materials because of its physical and technological properties. Various procedures improve its properties, and due to its environmental acceptability, heat treatment of wood is one of the most commonly used. Heat treatment causes changes in the cell walls and degradation of the main components of the wood structure (cellulose, hemicelluloses, lignin) and extractives. Hemicelluloses, as the most unstable components, are broken down first, followed by cellulose and finally lignin. Degradation results in a change in chemical composition and chemical reactions of colour change causing a technological problem because wood processing tends to make the colour as uniform as possible. The uniformity of colour and the desired colour tone are obtained by the process of steaming and thermal modification. The processing temperature is the most important factor that causes all the changes. Due to its wide use, need has arisen to investigate the ecological consequences of such a heat treatment process, as well as the impact of harmful substances and types of compounds released during the process and their toxicity.

Influence of Microstructure on Color Tone of Heat-Treated Red Paint Composed of Lead-Free Multicomponent Alkali Borosilicate Glass Frit and Hematite

Influence of Microstructure on Color Tone of Heat-Treated Red Paint Composed of Lead-Free Multicomponent Alkali Borosilicate Glass Frit and Hematite

Distinguishing the papilla of Vater during biliary cannulation using texture and color enhancement imaging: A pilot study.

ObjectivesUnderstanding the exact morphology of the bile duct opening is important for determining the success of bile duct cannulation. Texture and color enhancement imaging (TXI) has been reported to enhance slight changes in color tone and structure that are difficult to see with white light imaging. This study investigated whether TXI mode1 could improve papillary recognition by trainees inexperienced in endoscopic retrograde cholangiopancreatography.MethodsWe included 31 patients with naive papilla of Vater at a single institution in the study. Trainee endoscopists (n = 4) evaluated and identified the papilla according to the Inomata classification using white light imaging and TXI. The degree of agreement with the evaluation of supervising physicians (n = 4) was examined using the McNemar test.ResultsIn the trainee group, the kappa coefficient agreements were κ = 0.346 and κ = 0.754 for white light imaging and TXI, respectively. When further evaluated, the separate and septal types of papilla groups showed an increased concordance rate in one of the four trainees (76.67%–96.67%, p = 0.031, respectively). Moreover, comparison for two‐group evaluation showed an increased kappa coefficient in two of four trainees (0.34–0.92, p = 0.010, 0.45–0.92, p = 0.024).ConclusionsObservation of the duodenal papilla using TXI improved papillary differentiation and suggested the potential of TXI as a clinical tool. Further study of this method is necessary; it is expected to help reduce cannulation time and the incidence of pancreatitis.

A photo-induced colorimetric reaction of N,N'-bis[2-(trimethylammonium)ethyl]-1,8:4,5-naphthalenetetracarboxdiimide for detection of carboxylate anions

Here we show a novel colorimetric sensor system with a photo-induced colorimetric reaction of N,N'-bis[2-(trimethylammonium)ethyl]-1,8:4,5-naphthalenetetracarboxdiimide (TENDI) to detect and quantify carboxylate derivatives. In the presence of CH3COONa, TENDI aqueous solution under UV irradiation shows a photo-induced colorimetric reaction, which is due to the production of naphthalenediimide (NDI)-based radical anions whose absorbance peaks appear at around 400–600 nm. In contrast, no color changes are observed in the cases of diverse inorganic salts. In addition, TENDI shows another ability to discriminate the structural features of carboxylate derivatives by color tone. Moreover, interestingly, the Hill equation can approximate the relationship between carboxylate concentrations and absorbance values on the maximum absorbance wavelengths of the absorbance peaks due to the NDI-radical anions.

Carbon dots based multicolor fluorescence sensor for ratiometric and colorimetric dual-model detection of Cu2+

Herein, a multicolor fluorescence sensor with two emission peaks at 445 nm (F445) and 560 nm (F560) under excitation wavelength of 365 nm was facilely fabricated by hybridizing blue and yellow fluorescence carbon dots (B-CDs and Y-CDs). Cu2+ could selectively coordinate with the aromatic amino groups of the Y-CDs, thus forming the Cu2+-Y-CDs complex through electron pair sharing to efficiently quench the fluorescence of B-CDs by Förster resonance energy transfer. Meanwhile, the complex could suppress photoinduced electron transfer thus enhancing the fluorescence of Y-CDs. The unique interrelated opposite responses of the sensor toward Cu2+ could generate a remarkable change in the value of F560/F445 and consequently give rise to more easily distinguishable fluorescent color tonality changes from blue to yellow for colorimetric detection. The sensor possessed a low detection limit of 44.05 nmol L−1 and 169.46 nmol L−1 to recognize Cu2+ by the ratiometric fluorescent and colorimetric detection, respectively. Recoveries of 96.8–105.9% (RSD <3.8%) and 94.4–108.5% (RSD <7.7%) were respectively obtained in spiked samples by the ratiometric fluorescent and colorimetric detection, indicating their promising potentials to quick pre-warning of Cu2+ for ensuring food safety and improving public health.

Correlation between structure, chromaticity, and dielectric properties of calcium copper pyrophosphates, Ca2\u2212xCuxP2O7

The solid-state reaction was employed to synthesize Ca2−xCuxP2O7 by varying the mole ratio between Ca and Cu. The structure and crystallography of the pyrophosphate compounds were identified and confirmed by using X-ray diffraction (XRD). The Rietveld refinement method and the extended X-ray absorption fine structure (EXAFS) least-squares fitting technique were also applied to refine the sample crystal structure. The single phases of the obtained Ca2P2O7, CaCuP2O7, and Cu2P2O7 samples and the mixing phases of the obtained Ca1.5Cu0.5P2O7 and Ca0.5Cu1.5P2O7 samples were identified, and then only a single phase of the samples was subjected to structural and dielectrical analyses. The structural results exhibit the tetragonal crystal system with the P41 space group for β-Ca2P2O7, the monoclinic crystal system with the P21/c space group for CaCuP2O7, and the C2/c space group for α-Cu2P2O7. The dielectric constant (εr) of the single metal pyrophosphates (Ca2P2O7 and Cu2P2O7) was higher than that of binary metal pyrophosphates (CaCuP2O7). The image sensor result of the Cu2P2O7 sample (x = 2.00) illustrated a yellowish-green color, while other compounds (x = 0.50−1.50) presented color tones that changed from blue-green to bluish-green. Raman and Fourier transform infrared (FTIR) spectrophotometers were employed to characterize and confirm the vibrational characteristics of the P2O74− group, which contains the O–P–O radical ([PO2]-) and the P–O–P bride ([OPO]-) and approximate M–O stretching modes. Furthermore, this work reports for the first time that the change in the crystal structure of Ca2−xCuxP2O7 (i.e., bond angle of P−O−P in P2O74− and distortion phenomena in the M−O6 octahedral site) are cause the correlation between the structure, chromaticity, and dielectric properties of calcium copper pyrophosphates, Ca2−xCuxP2O7.

Study supporting restoration of rapakivi granite in St. Petersburg

The focus of this ongoing study has been on two rapakivi granites, wiborgite and pyterlite, that have been utilized in St Petersburg since the 1760s but originate from south-eastern Finland. The aims of this study have been to describe the two types of rapakivi granites in their geological settings, to assess the needs for restoration of stones utilized in constructions and to establish databases of stones utilized in historical buildings and of the original and alternative quarries. The focus of this study has been on defining the original quarries for the old building stones or finding other similar substitute granite deposits. Chemical analysis with a handheld XRF instrument was found to be the most promising approach when combined with multivariate mathematical tools. In addition, the applicability of chemical treatment of the surface of rapakivi granite for changing the appearance of stones was investigated. The visual appearance and texture of natural stones used in restoration are the key factors, in addition to the stone type and quality. The chemical treatment of stone surfaces using acidic or metal salt treatments altered the colour tone and visual pattern. Thermal treatment was also found to be effective, but it might be harmful to the surface structure. With further optimisation, chemical treatment could be a feasible method to change the visual appearance of fresh stone in the case of substitution of weathered stone. In addition, this project has initiated cross-border activities that aim to create opportunities for establishing first contacts between the authorities, construction companies, stone producers and the manufacturer who produces the needed high-quality stone pieces.

Biodegradation of Azo Dye by Bacterial Species Isolated from Dye Contaminated Area of Jetpur, Gujarat

The varieties of synthetic azo dyes are widely used in textile industries to generate range of color tones in the textile and paper industries. Such textile dyes are toxic for the animals, birds and human along with environment. It is needful to remove those dyes from the effluent. The degradation of such dyes is accompanied by the involvement of dye degradating microorganisms. The purpose of this research is to isolate, identify, and screen bacterial species capable of decolorizing reactive pink, congo red, and malachite green. Soil and water samples were collected from the dye contaminated area of Jetpur, Gujarat, India. Dye degradating bacteria were isolated and selected through primary and secondary screening. The effect of yeast extract amount on the dye degradation properties of bacteria was examined using a visible spectrophotometer.&#x0D; After secondary screening MD2, MD8, MD20, MD31, MD33 and MD34 were selected for further analysis. All isolated are able to degrade reactive pink, congo red, and malachite green after 120hrs of incubation at a 4mgl-1 concentration of yeast extract. Dye degradation remains constant for 4 mgl-1 and 2 mgl-1 but gets reduced in 1 mgl-1 of yeast extract concentration. Wheat germination rate in control was 65% compared to 96%, 88%, and 85% in MD2, MD8, MD20 respectively. Sorghum germination rate in control was 62% while in isolates no MD31, MD33, MD34 were 96%, 87%, 83% and 65%.

Sol-silicate versus organic paints: Durability after outdoor and ultraviolet radiation exposures

Sol-silicate paints and polyvinyl acetate paints with similar red and green colour tones were applied to concrete and brick specimens and underwent either natural outdoor exposure in a marine setting for 12 months or accelerated ultraviolet radiation exposure (total exposure 4620 h). Chromatic changes were regularly monitored via spectrophotometer measurements. After exposure, physical, chemical, and mineralogical changes were evaluated using a multianalytical protocol based on stereomicroscopy, X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, and contact angle and peeling test measurements.After both tests, all the samples underwent colour changes whose intensity was independent of the type of substrate and type of exposure, being more related to the nature of the chromophore than to the nature of the base paint (organic or sol-silicate). After the outdoor test, the detachment of the pictorial layer was occurred in all the samples, more intensely in the sol-silicate painted brick mockups; this detachment process was related to salt precipitation-dissolution phenomena, mainly gypsum from marine aerosol, which causes effects that are more adverse when the adhesion between the paint and the substrate is weak.Compared to conventional organic paints, the use of sol-silicate paints in works of art in public spaces could meet the durability expectations of artists, always performing a prior evaluation focused to the selection of substrates that provide good adhesion and located in environments free from sources of salts.

Eco-Benign Orange-Hued Pigment Derived from Aluminum-Enriched Biogenous Iron Oxide Sheaths.

Inorganic pigments have been widely used due to their low cost of production, strong hiding power, and chemical resistance; nevertheless, they have limited hue width and chromaticity. To eliminate these disadvantages, we herein propose the use of an ingenious biotemplate technique to produce Al-enriched biogenic iron oxide (BIOX) materials. Spectrophotometric color analysis showed that high levels of Al inclusion on heat-treated BIOX samples produced heightened yellowish hues and lightness. The Al-enriched BIOX sheaths exhibited a stable tubular structure and excellent thermal stability of color tones after heating at high temperatures and repetitive heat treatments. Ultrastructural analysis and mechanical destruction experiments revealed that the highly chromatic orange-hue of these pigments are ascribed probably to an ingenious cylindrical nanocomposite architecture composed of putative Fe-included low crystalline Al oxide regions and hematite particles embedded therein. The present work therefore demonstrates that the bioengineered material can serve as an epochal orange-hued inorganic pigment with low toxicity and marked thermostability that should meet large industrial demand.

Ultra-sensitive detection of pyridine in water using zinc porphyrin incorporated in a transparent hydrophobic film

In this study, we investigated the axial coordination reaction between pyridine and zinc meso-tetra(4-sulfonatophenyl)porphyrin (ZnTPPS) incorporated in a transparent layered double hydroxide (LDH) film modified with 1-decanesulfonate (C10S) in an aqueous solution. The apparent equilibrium constant ({K}_{11}) of the axial coordination reaction between pyridine and ZnTPPS incorporated in the transparent ZnTPPS/C10S/LDH film was approximately 260 times that of the corresponding reaction in an aqueous solution. The hydrophobisation of the LDH interlayer space by C10S, which led to the elimination of water molecules surrounding ZnTPPS and enabled the accumulation of pyridine molecules, was responsible for such a significant increase in the apparent {K}_{11} value. The developed film can detect pyridine in aqueous solutions with ultra-high sensitivity in the order of 10−5 mol/L through changes in the colour tone, which is comparable to the molecular detection ability of insect antennae. The sensing response was also observed at pyridine concentrations as low as 10−9 mol/L.

Single underwater image restoration based on descattering and color correction

Underwater images typically exhibit color distortion and low contrast due to the absorption and scattering of the non-uniform medium during the propagation of light underwater. To address these problems, an effective underwater image restoration method is presented in this paper. Firstly, we adopted an adaptive dark channel prior that can be applied to underwater images with different color tones. Then, the local water light with strong robustness is obtained by utilizing maximum filtering and Gaussian low-pass filtering. Additionally, a linear relationship between blurred and clear images in the dark channel was introduced combining with the attenuation coefficient compensation to estimate the transmission of r, g and b channels. Ultimately, we designed a new adaptive color compensation method by taking into account the attenuation difference of the three color channels. Simulation and experimental results show that the proposed method can effectively improve the clarity and contrast of the image and eliminate color distortion.