Color Rendering Index Research Articles

Quality of Colour Rendering in Photographic Scenes Illuminated by Light Sources with Light-Shaping Attachments

In both commercial and scientific photography, achieving accurate colour reproduction is essential. This study investigates the influence of light-shaping attachments on colour rendering indices (CRIs) under various lighting conditions. Through 180 measurements of different lighting combinations, statistical analysis reveals significant interactions between light sources, modifiers, and CRI test colour samples (TCS). Snoots consistently produce superior CRIs, while interactions between light sources and other light modifiers vary, affecting CRIs differently based on spectral distributions and material properties of the modifiers. Combining light sources and modifiers from the same manufacturer is found to enhance colour accuracy. These findings offer valuable insights for photographers, highlighting the importance of understanding light properties and light-shaping attachment effects on colour rendition. By informing best practices, this research contributes to achieving high-quality photographs across commercial and scientific domains, ensuring both accurate data representation and visually appealing results.

A sp2-carbon-linked orange-emitting 2D covalent organic framework containing pyrene and tetraphenylethene units: Synthesis and application for rare-earth free white light-emitting diodes

A sp2-carbon-linked 2D covalent organic framework (COF) containing pyrene and tetraphenylethene units was synthesized via Knoevenagel condensation by using 4,4′,4″,4‴-(ethene-1,1,2,2-tetrayl)tetrabenzaldehyde (ETTBA) and 2,2′-(pyrene-1,6-diylbis(4,1-phenylene))diacetonitrile (PDPD) as monomers. This COF consisted of a periodic single-pore rhombic (R) structure and was in an eclipsed stacking mode (AA-R). Its powders emitted bright orange light which was mainly located at 555∼750 nm with the maximum emission wavelength (λem,max) of 612 nm, and its photoluminescence quantum yield (PLQY) was 21.0 %. The COF showed high thermal stability, its thermal decomposition temperature (Td) was up to 509 °C, and its relative emission intensity at 90 °C remained 93.1 % of that at 30 °C, at 150 °C was 70.4 % of that at 30 °C, which suggested it was suitable for LEDs. The COF together with a quasi-green-emitting graphitic C3N4 derivative (s-g-C3N4-Ph) as rare-earth free phosphors under the excitation of GaN-based blue light chips (around 460 nm, 25.0 lm·W−1), a series of cold/neutral/warm white LEDs with good light quality were successfully fabricated. For example, one of white LEDs showed high color rendering index (CRI) of 83.1, its correlated color temperature (CCT) was 6384 K, luminous efficacy (LE) was 19.19 lm·W−1, moreover, its CIE chromaticity coordinates (0.32, 0.32) was very close to (0.33, 0.33) of pure white light.

Novel Approach to Color‐Neutral Transparent Solar Cells: An Organic‐Si Hybrid Achieved by Laser Microhole Drilling

AbstractTransparent solar cells (TSCs) hold promise for applications in building‐integrated photovoltaics (BIPVs) and vehicles. However, existing TSCs often have compromised color neutrality and efficiency because of the distinctive colors arising from their photoactive materials. The study proposes a novel fabrication method for TSCs based on Si wafers with the average visible transmittance (AVT) controlled by creating a microhole pattern through a combination of nanosecond laser drilling and subsequent wet etching. Through this ambient‐air process, organic–Si hybrid TSCs are successfully realized by integrating an organic PEDOT:PSS layer onto this structure with a neutral color. The power conversion efficiency (PCE) is adjusted by the fraction of the perforated region, and it attained 6.20% at 30% AVT, 5.37% at 40% AVT, and 4.67% at 50% AVT. In this hybrid TSC approach, the CIE color coordinates are closely aligned with the neutral‐color points (0, 0), resulting in color rendering index (CRI) values exceeding 99. The strategy represents a significant step toward the development of efficient color‐neutral TSCs for transparent solar applications.

Semitransparent Near‐Infrared Organic Photodetectors: Flexible, Large‐Area, and Physical‐Vapor‐Deposited for Versatile Advanced Optical Applications

AbstractOrganic photodetectors (OPDs) have experienced remarkable performance improvements over the past decade thanks to significant advancements in organic material synthesis and device architecture engineering. In this study, high‐performance near‐infrared (NIR) OPDs with versatile advanced properties, including large detection areas, mechanical flexibility, and high transparency are realized. By incorporating a thin photo‐absorbing layer, functional blocking layers with a large energy gap, and semitransparent electrodes, the OPDs achieve an average visible transmittance (AVT) of up to 53.4% and color rendering index (CRI) of up to 95 within the human vision photopic response window of 380–780 nm. Both the small (6.44 mm2) and large (256 mm2) detection‐area semitransparent OPDs demonstrate an impressive external quantum efficiency (EQE) of 34% and 36%, and specific detectivity (D*) of 1.4 × 1013 and 1.1 × 1012 Jones, respectively, comparable to silicon‐based inorganic photodetectors. As application demonstrations, OPDs with rigid and flexible substrates are employed for NIR imaging and biosensing, respectively. Notably, the flexible semitransparent OPDs are utilized as signal receivers in conjunction with semitransparent NIR organic light‐emitting diodes (OLEDs) operating as signal producers, demonstrating the feasibility of invisible optical communication. These OPDs represent the best‐performing see‐through devices with flexibility, making them promising candidates for integratable, bio‐compatible, and invisible optical‐sensing applications.

Luminous Transmittance and Color Rendering Characteristics of Evaporated Chalcopyrite Thin Films for Semitransparent Photovoltaics

The luminous transmittance and the color rendering index of daylight through semitransparent photovoltaic glazing are essential parameters for visual comfort indoors, and they must be considered for different absorber materials that were traditionally developed for opaque solar cells, such as those of the chalcopyrite type. With this aim, various chalcopyrite compounds (CuInSe2, CuInS2 and CuGaS2) were prepared by means of evaporation and then measured to obtain their optical absorption spectra. These experimental data are used here to calculate the solar absorptance (αS), luminous transmittance (τL) and color rendering index (Ra) as a function of the chalcopyrite film thickness. The comparative analysis of the different factors indicates that 70 nm thick CuInSe2 is optimal to guarantee excellent visual comfort (τL = 50% and Ra = 93%) while absorbing as much solar irradiance (αS = 37%) as 130 nm thick CuInS2 or 900 nm thick CuGaS2. The second option (130 nm thick CuInS2) is also considered good (τL = 40% and Ra = 80%), but for CuGaS2, the thickness should be kept below 250 nm in order to obtain a suitable color rendering Ra ≥ 60%.

Full-Spectrum White-Light Emission from Triple Self-Trapped Excitons in Hybrid Mixed-Metal Halides.

Low-dimensional metal halides with broadband emissions are expected to serve as downconversion luminescent materials for solid-state lighting (SSL). However, efficiently generating full-spectrum white-light emission with a high color-rendering index (CRI) in single-phase emitters remains a challenge. Here, we report a novel zero-dimensional (0D) hybrid mixed-metal halide (TPA)2CuAgI4 (TPA = tetrapropylammonium), in which individual [CuAgI4]2- dimers are completely isolated and surrounded by the organic cations TPA+. Cu+ and Ag+ share the same crystallographic site in [CuAgI4]2- dimers with the same statistical probability. Upon photoexcitation, single crystals exhibit a full-spectrum white-light emission with a full width at half-maximum (fwhm) of up to 314 nm and a high quantum efficiency of 46.8%. Detailed photophysical studies and theoretical calculations reveal that the ultra-broadband emission of (TPA)2CuAgI4 originates from the radiative recombination of red-, green-, and blue-emitting self-trapped excitons in [CuAgI4]2- dimers. In addition, (TPA)2CuAgI4 nanocrystals were successfully synthesized and exhibited optical properties similar to those of single-crystal counterparts. Finally, a prototype ultraviolet (UV)-pumped white-light-emitting diode (WLED) and a composite thin film employing this new white-light emitter produces a well-distributed full-spectrum white light with a high CRI of 91.4 and a warm correlated color temperature (CCT) of 4135 K, indicating the potential application of this white-light emitter in SSL. These results provide a new perspective for designing superior single-phase white-light emitters.

The influences of LaVO4:Eu3+,Cr3+ red phosphors on white light-emitting diode applications

<span>In this present paper, the </span><span lang="EN-ID">LaVO<sub>4</sub>:Eu<sup>3+</sup>,Cr<sup>3+</sup> (</span><span>LV:Eu,Cr) </span><span lang="EN-ID">red-orange phosphors</span><span>are introduced in WLED fabrication. The LV:Eu,Cr phosphor is synthesized with high-temperature solid-phase reaction</span><span lang="IN">.</span><span> The luminescence properties of the phosphor are monitored with ultraviolet-visible and near-infrared (UV-vis-NIR) measurements. The heat generating in the phosphor sample is also investigated with different power densities of the 980 nm laser. The phosphor exhibits absorption bands at 254 nm and 316 nm, suitable for UV light-emitting diodes (UV LED) applications. The Cr<sup>3+</sup> concentrations have noticeable effects on the luminescence of the phosphor. The increasing Cr<sup>3+ </sup>dosage initiates reduction in Eu<sup>3+</sup> emission intensity and luminescence lifetime average. The heat-activated amount in the phosphor is also significant with the higher concentration of Cr<sup>3+</sup> ions. When using the LV:Eu,Cr phosphor in white light-emitting model (WLED), the dominant red-orange emission centered at 595 nm is observed, in addition to the blue peak at 453 nm. The luminosity, color rendition, and color uniformity of the WLED light are also discussed. The findings indicate that the phosphor can be combined with other high-efficiency blue and green phosphors to obtain the improved color rendition and luminous performances and used in heat-creating optical applications.</span>

CaO:Tb<sup>3+ </sup> green-emitting phosphor for white light-emitted diode-phosphor applications: the improvement of light output intensity

The use of CaO:Tb3+ with light green emission on for improvement of both luminescent output and chromatic fidelity of the white light emitted from a light-emitting diode (LED). The CaO:Tb3+ is combined with the yellow-emitting phosphor of YAG:Ce3+ to provide sufficient colored spectral proportion for the white light generation, enhancing the color performance. The phosphor combination is utilized for the three most applied LED structures: conformal, in-cup, and remote phosphor structures. The changes in optical properties of these three LEDs are monitored with adjustments in the proportion of CaO:Tb3+. The higher proportion of the green phosphor results in higher scattering efficiency in all structures, offering better color coordination and stronger luminous flux. The color quality scale is somehow reduced when CaO:Tb3+ concentration is more than a certain level. Therefore, depending on the phosphor configuration of the white light-emitting diode (WLED), the concentration of CaO:Tb3+ should be modified to achieve a good color rendition with improved color consistency and luminous properties.

Blue-emitting fluorophosphate phosphor to enhance color rendition of near-ultraviolet LED white light

<span>This work presents a novel blue phosphor, Na<sub>2</sub>MgPO<sub>4</sub>F: Eu<sup>2+</sup> (NMPF: Eu) for violet 405-nm light-emitting diode (LED) devices. The compound is synthesized via a simple one-step sintering process using readily available precursors. Notably, NMPF: Eu exhibits highly efficient and thermally stable blue emission when excited by violet light. The NMPF: Eu is applied to produce a white LED device driven by a 405 nm LED chip and Y3Al5O12: Ce3+ (YAG: Ce) yellow phosphor. The impacts of NMPF: Eu phosphors are investigated by varying their particle size while maintaining consistent doping concentrations. Impressively, the LED prototype displays a substantial reduction in blue light emission while generating white light with enhanced color rendering and luminous properties. These results highlight the suitability and potential of NMPF: Eu as a promising phosphor for widening violet LED applications, especially in generating white light perceptible to the human eyes.</span>

Defect assisted self‐reduction and post annealing of Mn ions activated garnet transparent ceramics

AbstractTransition‐metal Mn2+ ion‐doped transparent ceramics (TCs) are promising color‐convertors to improve color rendition for solid‐state lighting. However, the stabilization of Mn2+ remains a challenge owing to the changeable atmosphere in the specific preparation of TC. In this work, the variations of valence states of Mn ions in typical garnet lattice host (YAG and LuAG) throughout the TC fabrication were demonstrated. By combined first principles calculation and experimental investigation, an enhanced self‐reduction of Mn ions was clarified in LuAG host, which was originated from the higher concentration of oxygen vacancy defects. Moreover, the air annealing treatment could significantly weaken and enhance the absorption of Mn2+ and Mn3+ respectively, degrading the orange–red emission peaking at 594 nm. On account of the oxidation of Mn2+ ions, a photoluminescence spectra redshift of 9 nm was observed with increasing air annealing temperature and oxygen content, owing to strengthened crystal field strength surrounding Mn2+ ions. Finally, a high color rendering index of 74.5 of resultant white laser diodes device structured by single‐phase LuAG:Ce,Mn TCs was obtained based on an efficient energy transfer process from Ce3+ to Mn2+. This study will deepen the understanding of the crystal defects inside TCs on luminescence properties, as well as inspiring more exploration on defect control to develop high performance ceramic color‐convertor.

Unveiling the luminescence property of Pr-incorporated barium cerate perovskites for white LED applications

Abstract The various structural and conductive attributes of barium cerate, BaCeO3 position it as a highly promising matrix for energy storage purposes. The current study illustrates that barium cerate can be effectively tailored by introducing trivalent praseodymium ions, thereby enhancing its optical properties as well. In this work, single-phased orthorhombic crystalline powders of barium cerate incorporated with Pr3+ (BaCeO3: Pr3+) were synthesized using the gel combustion procedure, followed by calcination. We conducted a comprehensive investigation into their crystal structure, vibrational characteristics, optical properties, and potential applications in wLEDs. The structure refinement indicates that Pr3+ occupies Ce4+ site, which results in the expansion of the cell and facilitates the generation of defects such as Pr Ce ′ ${\mathrm{Pr}}_{\text{Ce}}^{\prime }$ and oxygen vacancies V O ⋅ ⋅ ${V}_{\text{O}}^{\cdot \cdot }$ . By correlating information gathered from diffuse reflectance spectra with that obtained from photoluminescence spectra, we gained a deeper understanding of the electronic level structure and the mechanism of energy transfer. We successfully achieved a finely tuned cool white light emission with very low color purity (CP), a high color rendering index (CRI), and a high correlated color temperature (CCT) with a quantum efficiency of 36.3 % by exciting the material with a 321 nm wavelength. Because of the transfer of energy within activators through dipole–dipole interaction, luminescence quenching occurs when Pr3+ concentration reaches 1 wt%. To the best of our knowledge, this is the initial investigation of luminescence properties of Pr-incorporated barium cerate perovskites.

Color‐Tunable TADF Conjugated Polymers Toward Voltage‐Regulating White OLEDs for Intelligent Lighting

AbstractColor‐tunable luminescent polymers are highly desirable materials for meeting the daily needs of humans in terms of circadian rhythm, yet they are rarely reported. Herein, a feasible approach is developed for color‐tunable thermally activated delayed fluorescence (TADF) conjugated polymers by incorporating green and red TADF units into blue fluorescent polymeric backbone. The solution‐processed OLEDs based on the synthesized polymers exhibit high‐efficiency red emission with a maximum external quantum efficiency (EQEmax) of 26.1% under low voltage (6 V). With a slight increase in voltage, warm white emission with EQEmax of 23.9%, color rendering index (CRI) of 76 and low corelated color temperature (CCT) of 1700 K is obtained. These results represent the highest efficiencies among the red and warm white OLEDs based on TADF polymers, respectively. Intriguingly, under higher voltage (10 V), warm white emission with high CRI of 87, CCT of 3216 K, and luminance of over 5300 cd m−2 is accessible. This work provides a promising approach for intelligent lighting by voltage‐regulating white OLEDs.

The design and synthesis of 1-phenylimidazo[1,5-a]pyridine – anthracene-based fluorophore for greenish-yellow organic light emitting diode and warm white LED

Solution-processed OLEDs offer a promising and affordable technology for solid-state lighting and superior self-luminous display panels. Herein, an imidazo[1,5-a]pyridine (ImPy)-based fluorophore decorated with an aromatic π-system anthracene is synthesized by a one-pot condensation approach. From the theoretical study, the energy difference between HOMO and LUMO is 3.1 eV. The molecule shows excellent thermal stability and electrochemical stability. It exhibits efficient intramolecular charge transfer and displays a positive solvatochromic photoluminescence emission band ranging from 528 nm in hexane to 586 nm in acetonitrile with large Stokes’ shift of ∼11,000 cm−1. The OLEDs made of this emitter displayed good device performance with luminous efficiency of 4.4 cd A–1, power efficiency of 2.2 lm W–1 and external quantum efficiency of 3.2%. Additionally, this OLED emitted greenish-yellow light with CIE coordinate (0.34, 0.45) and possessed a low turn-on voltage of 7 V. The material also used in white LED fabrication and the fabricated white LED displayed an excellent color rendering index (CRI), the luminous efficiency of radiation (LER), and correlated color temperatures (CCT) of 89328 lm W–1 , and 4907 K, respectively with CIE coordinate (0.35,0.32).

Modulating Luminescence of Double Perovskites by Intrinsic Strain Effect and Applications in White Light Emitting Devices

AbstractDouble perovskite (DP) is considered as a promising candidate for single‐component white‐light emitters. However, the photoluminescence (PL) efficiency of the small sized DP, such as microcrystals and nanocrystals, is generally unsatisfactory. In this work, by comparing the Sb/Bi co‐doped Cs2NaInCl6 microcrystals prepared at different conditions, it is revealed that the PL spectral profile and efficiency are highly dependent on intrinsic strain effect. All the Sb/Bi co‐doped Cs2NaInCl6 DPs exhibit blue PL at ≈445 nm and yellow PL at ≈560 nm. When the crystal size decreases, the release of local strain results in a significant quenching in the emission intensity. Accordingly, by optimizing the reaction conditions to introduce sufficient lattice mismatch, high PL quantum yields (QYs) of 76.38% and 86.44% are obtained for blue and yellow PL, respectively. Moreover, a white light‐emitting convertor with a high colour rendering index (CRI) of 90.0 is fabricated, which shows a luminous efficiency of 40.4 lm W−1.

Efficient Deep‐Blue Light‐Emitting 2D (100)‐Oriented Perovskites and Spectral Broadening by Exciton Self‐Trapping for White‐light Emissions

AbstractEfficient narrow deep‐blue and broadband emissions in layered 2D organic–inorganic hybrid metal halide perovskites (MHPs) are attracting more attention and need further study. In this work, two (100)‐oriented 2D organic‐inorganic hybrid MHPs of (TFI)2PbBr4 and (TFI)2PbCl4·H2O (TFI = 4‐(trifluoromethyl)‐1H‐imidazole) with efficient deep‐blue and bluish‐white emissions are synthesized and the photoluminescence quantum yields (PLQYs) reached up to 81.21% and 20.23%, respectively. As both intrinsic lattice distortions of two crystals with similar crystal structure are almost negligible, they have theoretical deep‐blue emissions empirically. However, the halogen substitution of chlorine (Cl) by bromine (Br) broadened the deep‐blue photoluminescence to a bluish‐white area. Here, the spectral broadening phenomenon is discussed in detail. The (TFI)2PbBr4 film shows a narrow emission with a 16 nm full width at half maximum (FWHM) peaking at 435 nm upon excitation, and an ultraviolet‐pumped light‐emitting diode (LED) prepared by bluish‐white (TFI)2PbCl4·H2O phosphor shows a color rendering index (CRI) of ≈93 and a related color temperature (CCT) of 4162K, indicating their potential applications in deep‐blue and white LEDs, respectively.

The effects of light emitting diodes on mitochondrial function and cellular viability of M-1 cell and mouse CD1 brain cortex neurons.

The invention of Light Emitting Diode (LED) revolutionized energy-efficient illumination, but concerns persist regarding the potential harm of blue light to our eyes. In this study, we scrutinized the impact of LED light characteristics on eyes using two cell types: M-1 (rich in mitochondria) and CD-1 (neuronal). Variations in color rendering index (CRI) and correlated color temperature (CCT) were investigated, alongside exposure durations ranging from 0 to 24 hours. The findings illuminated the potential benefits of high-quality LED lighting, characterized by a high CRI and low CCT, which emits a greater proportion of red light. This form of lighting was associated with enhanced cell proliferation, elevated ATP levels, and reduced oxidative stress. In contrast, LEDs with low CRI and high CCT exhibited adverse effects, diminishing cell viability and increasing oxidative stress. These results suggest that high-quality LED lighting may have neuroprotective potential as a treatment option, such as for retinal ganglion cells.

Highly thermostable RhB@Zr-Eddc for the selective sensing of nitrofurazone and efficient white light emitting diode.

Highly thermostable RhB@Zr-Eddc composites with the Rhodamine B (RhB) enclosed into the nanocages of Zr-Eddc was synthesized by one-pot method under hydrothermal conditions, whose structure, morphology and stability were characterized through the X-ray powder diffractometry (XRD), scanning electron microscopy (SEM) and thermogravimetric analysis (TGA). RhB@Zr-Eddc showed the highly thermal stability up to 550°C and emitted the bright red-light emission at 605nm, which could highly selective detect the nitrofurazone (NFZ) among eleven other antibiotics in aqueous solution. Furthermore, via combining the RhB@Zr-Eddc with commercial green phosphor (Y3Al5O12:Ce3+, Ga3+), the mixture was encapsulated onto a 455nm blue LED chip, creating an ex-cellent white light emitting diode (WLED) device with the correlated colour temperature (CCT) of 4710K, luminous efficiency (LE) of 43.17lm/w and Color Rendering Index (CRI) of 89.2.

Fluorescence properties of novel deep-red phosphor LiMg4SbO7:Mn4+ with excellent quantum efficiency and color purity for warm white LEDs.

Red fluorescent materials have important application value in the background light and LED lighting fields of displays. In this work, a novel type of rare earth free deep-red phosphor LiMg4SbO7:Mn4+ was prepared successfully, and its crystal structure, microstructure, fluorescence spectrum, quantum yield, thermal stability, fluorescence lifetime, color coordinates and color purity were studied in detail. The excitation spectra of LiMg4SbO7:Mn4+ phosphors are located at 200-600 nm, which can be matched with ultraviolet, near-ultraviolet, and blue-light chips. The exciting result is that the LiMg4SbO7:0.002Mn4+ phosphor exhibits astonishing quantum efficiency, thermal stability and color purity. Finally, the developed LiMg4SbO7:Mn4+ and the yellow phosphor Y3Al5O12:Ce3+ (YAG:Ce3+) were mixed and coated on a blue light chip (460 nm) to produce a w-LED, which exhibited warm white luminescence with color coordinates of (0.3575, 0.3809), correlated colour temperature (CCT) of 4687 K, and color rendering index (CRI) of 83.6. It is reasonable to consider that LiMg4SbO7:Mn4+ phosphors with excellent photoluminescence performance have great application value in LED lighting fields.

Defect Induced high-color-rendering white light emissions from Ag-doped ZnO

It is crucial to find high-quality white-light phosphors that are simple to synthesize in order to create efficient lighting. In this pursuit, the focus has been on achieving the emission of white light in ZnO and Ag-doped ZnO emerging as a promising phosphor candidate. The optimized ZnO nano phosphors demonstrated visible-light emission with ideal Commission international de I E “Eclairage frequently abbreviated as coordinates (x = 0.33, y = 0.33 ) and a correlated color temperature of 6200 K, and a color rendering index of 100 for equivalent to day white light. Furthermore, under certain ideal processing conditions, neutral white-light emission (x = 0.33, y = 0.33 at λex = 280 and 370 nm) with a Color correlated temperature (CCT) of 5500 K(approx.) was achieved. The Color Rendering Index (CRI) of the ZnO and Ag:ZnO nanoparticles exceeded 90, with high values approaching 96%, which is necessary for accurately portraying object colors in comparison to natural sunshine. The research findings revealed a decrease in the FS emission intensity with all the UV excitation when Ag doped in ZnO, which aligns well with the principles of Stern-Volmer quenching. A reduction in intensity was observed which may be due to the Ag dopant interacting with the luminescent nanoparticles and causing a reduction in their emitted light. The study successfully develops and optimizes ZnO-based nano phosphors with tailored white-light emission characteristics, presenting a promising solution for achieving energy-efficient and high-quality white-light sources for various lighting applications.

Phosphor-free micro-pyramid InGaN-based white light-emitting diode with a high color rendering index on a β-Ga2O3 substrate.

We demonstrate the InGaN/GaN-based monolithic micro-pyramid white (MPW) vertical LED (VLED) grown on (-201)-oriented β-Ga2O3 substrate by selective area growth. The transmission electron microscopy (TEM) reveals an almost defect-free GaN pyramid structure on (10-11) sidewalls, including stacked dual-wavelength multi-quantum wells (MQWs). From the electroluminescence (EL) spectra of the fabricated MPW VLED, a white light emission with a high color rendering index (CRI) of 97.4 is achieved. Furthermore, the simulation shows that the light extraction efficiency (LEE) of the MPW VLED is at least 4 times higher compared with the conventional planar LED. These results show that the MPW VLED grown on β-Ga2O3 has great potential for highly efficient phosphor-free white light emission.