Color Of Samples Research Articles

US of Lower Extremity Deep Vein Thrombosis: A Review.

The standard protocol for lower extremity venous US extends from the common femoral vein through the deep calf veins with color and spectral Doppler sampling, allowing evaluation of acute deep vein thrombosis and differentiation from postthrombotic change.

Examining differences in the effects and contexts of naturalistic psilocybin use for White participants vs. Participants of Color: A longitudinal online survey study

BackgroundPsilocybin (a psychoactive compound found in “magic mushrooms” or “shrooms”) has been gaining increased attention in research and popular culture as a number of clinical and observational studies have demonstrated that it may have potential for improving mental wellbeing. Relatedly, there has been a substantial uptick in naturalistic (e.g., real-world, non-clinical) psilocybin use in the United States. While a number of longitudinal studies have demonstrated that naturalistic psilocybin use is linked to positive mental health outcomes on average, few studies have examined how the effects of psilocybin and contexts for psilocybin use may differ for White populations compared to Populations of Color. ObjectiveTo examine differences in health outcomes, subjective effects, and contexts of naturalistic psilocybin use in White participants compared to Participants of Color. MethodsThis study used data from a large, online longitudinal study of individuals who planned to engage in naturalistic psilocybin use (N = 2833). We used mixed-effects models to assess whether race/ethnicity (White vs. Participant of Color) moderated associations between time (Time 2 [initial assessment point for longitudinal measures], Time 5 [2–4 weeks post-psilocybin experience, and Time 6 [2–3 months post-experience]) and outcomes related to mental health (depression, anxiety, spiritual wellbeing, cognitive flexibility, emotion regulation [expressive suppression + cognitive reappraisal]). We also used exploratory chi-squared tests to examine differences in contexts for psilocybin use as well as differences in subjective effects related to the psilocybin experience. ResultsRace/ethnicity moderated the associations between time for predicting spiritual wellbeing (beta = −1.8; 95 % CI [−3.4, −0.17]; p < 0.05), cognitive flexibility (beta = −1.5 [−2.7, −0.26]; p < 0.05), and emotion regulation – expressive suppression (beta = 0.25 [0.06, 0.44]; p < 0.05) at Time 6 (but not Time 5). Additionally, Participants of Color reported minor differences in subjective effects and context for use compared to White participants (e.g., more likely to have set an intention prior to use, report time speeding up during the experience, etc.). We found reductions in anxiety and depression for both Participants of Color and White participants, and our moderation tests for these outcomes were not significant. ConclusionRace/ethnicity impacts the associations between psilocybin use and various markers of mental wellbeing. Future longitudinal studies and experimental studies with larger samples of color can further elucidate the preliminary findings from this study.

Drying kinetics and mathematical modeling of coconut meat slices: Insight into pretreatment and drying synergic effect

Coconut consumption provides nutritional and health benefits to humans. Yet, poor postharvest and preservation methods result in the loss of coconut fruit bunches yearly. Investigations into achieving drying techniques that result in optimum drying rates coupled with consumer's desired end products that are both commercially and nutritionally viable remain paramount in the food industry. Consequently, osmotic dehydration is commendable for its low-cost pretreatment merit. Therefore, the study examined the drying-kinetics, energy consumption, effective moisture diffusivity (Deff), vitamin C retention, color, and rehydration behavior of coconut cultivars (Sri Lanka Green Dwarf × Vanuatu Tall (SGD × VTT), Catigan (CAT), and Tacunan Green Dwarf (TGD)) meat slices. Samples were osmotically pretreated with sucrose solution (30 %/30 min) and subjected to oven drying (80, 90, 100, and 110 °C (air velocity of 2 m/s) and lyophilization (−45 ± 2 °C) methods. A mathematical model was employed to predict the effect of osmotic pretreatment on drying dynamics and the assessment of utilized energy, vitamin C content, color, and rehydration of coconut meat slices at different drying conditions. The oven-dried sample's color changed (p < 0.05) compared to lyophilized samples. Drying-kinetics models were validated using determination coefficient (R2) and root mean square error (RMSE). The Asymptotic model satisfactorily suited the samples' drying data goodness fitting based on R2≥0.90−0.99 and low RMSE ≤0.01−0.12 compared to other models for both drying methods. Deff ranged between 1.10 × 10−07 m2s−1 and 7.90 × 10−08 m2s−1 for all the drying methods. CAT sample retained high vitamin C content compared to SGD × VTT and TGD samples. Rehydration ratio values were significant at lower temperatures among oven-dried experimental samples whereas TGD samples exhibited a significant rehydration values compared to SGD × VTT and CAT lyophilized samples. Among the drying methods, oven drying exhibited low energy consumption with shorter drying time and optimum Deff per adopted temperature ranges compared to lyophilization. The study revealed that temperature, time, the sucrose solution, and the thickness of the coconut slices strongly influenced the drying kinetics of the osmotically pre-treated coconut meat slice's drying features.

On the Impact of Discrete Atomic Compression on Image Classification by Convolutional Neural Networks

Digital images play a particular role in a wide range of systems. Image processing, storing and transferring via networks require a lot of memory, time and traffic. Also, appropriate protection is required in the case of confidential data. Discrete atomic compression (DAC) is an approach providing image compression and encryption simultaneously. It has two processing modes: lossless and lossy. The latter one ensures a higher compression ratio in combination with inevitable quality loss that may affect decompressed image analysis, in particular, classification. In this paper, we explore the impact of distortions produced by DAC on performance of several state-of-the-art classifiers based on convolutional neural networks (CNNs). The classic, block-splitting and chroma subsampling modes of DAC are considered. It is shown that each of them produces a quite small effect on MobileNetV2, VGG16, VGG19, ResNet50, NASNetMobile and NASNetLarge models. This research shows that, using the DAC approach, memory expenses can be reduced without significant degradation of performance of the aforementioned CNN-based classifiers.

Inverted V-shaped size-dependent emission wavelength shift in InGaN micro-LEDs with size down to 1 μm

The size-dependent emission wavelength shift of micro-scale light emitting diodes (micro-LEDs) has been frequently reported in recent publications, but its underlying physical mechanism has not yet been thoroughly elucidated. Here, we fabricate and characterize the red, green, and blue InGaN micro-LED mesas with different diameters down to 1 μm. As the size decreases, all the samples of different colors show an inverted V-shaped photoluminescence wavelength variation trend, first a red shift and then a blue shift, and the shifting range is larger for samples with longer wavelengths. Micro-Raman spectrum confirms that the stress was significantly released after scaling down the size from epitaxial wafer to 1 μm. The theoretical simulations show that the red and blue shifts are, respectively, attributed to the bandgap narrowing and the weakening of the quantum-confined Stark effect caused by strain relaxation, which dominate successively.

Cr-Coot: Chronological Coot Algorithm-Based Deep Learning Model for Video Demosaicing

Usually, digital cameras comprise sensor arrays enclosed by Color Filter Arrays (CFAs), mosaics of minute color filters. Thus, every pixel sensor usually records limited spectral data regarding relevant pixels. Demosaicing is defined as the procedure of deducing the misplaced data for every pixel, which plays a vital role in recreating high-quality full-color images. Denoising and demosaicing are the major processes in the camera imaging chain for both videos and images. Here, reconstruction errors occur in these points and have undesirable effects on the final outcome, when it is not appropriately managed. The demosaicing process provokes color and spatial correlation of noises, and it is improved by means of imagining a pipeline. This organized noise usually destroys the quality of the image as well as fails to prevent accurate interpretation of an image. During the mitigation of this structured noise on processed data, denoising techniques diminish the texture and information. Therefore, an effectual demosaicing technique is essential for recreating the full-color image from the defective color samples. Thus, in this paper, an effectual video demosaicing model is proposed using an optimized deep learning system. The designed video demosaicing system achieved better performance with a Peak Signal-to-Noise Ratio (PSNR) of 59.74 dB, Second Derivative, like Measure of Enhancement (SDME) of 63.51, and Root Mean Squared Error (RMSE) of 0.3660.

Fading and Color Reproducibility of Nipple-Areola Tattoos in Asian Patients.

Background The purpose of this study was to clarify fading, red, green, and blue values (RGB) change, and color reproducibility for nipple-areola complex (NAC) tattoos. Methods NAC tattooing was performed on 60 sites in 59 Japanese patients prospectively. The evaluation was assessed using digital photo, Casmatch standardization, and RGB and luminance values preoperatively, immediately after, 1 week, 1, 3, 6, and 12 months after tattooing. RGB and luminance values changes over time, time-adjusted fading rate, and the rate of luminance at 12 months were calculated. In color reproducibility study ( n = 34), RGB values after 12 months were compared with the color sample about dark/reddish and light/less reddish pigments. Results RGB varied widely from immediately after to 1 month after tattooing. For RGB and luminance, significant differences were seen between pre and immediate after, 1 and 3 months, 3 and 6 months, and 6 and 12 months. In G values, significant differences were seen between all neighboring points. The fading rate tended to decrease as time progresses, but was not significant, that is, fading continued even between 6 and 12 months. Luminance was 9% brighter than contralateral NAC at 12 months. Color reproducibility tended to be higher with dark/reddish pigments, despite no significant differences. Conclusion The fading rate of tattooed NACs tended to decrease as time progresses, but fading still occurs between 6 and 12 months. Luminance was 9% brighter than contralateral NAC at 12 months after.

Colour reproduction evaluation of whole-slide imaging scanners for digital pathology

ABSTRACT Digital pathology using whole-slide imaging (WSI) scanners aids pathologists challenged by diagnostic volume and novel diagnostic methods. Colour reproducibility of WSI scanners is crucial for accurate digital diagnoses. We propose an objective and quantitative method for evaluating colour reproduction in digital images of pathological specimens from two perspectives: true colour value reproduction and colour discrimination. We define 57 critical features for evaluation, extract tissue structures, and establish diagnostic criteria. Our method is unique and useful for clinical use. We tested a prototype scanner, and it satisfied all criteria for true colour value reproduction (all the colour samples corresponding to the selected tissue evaluation points were experimentally within the acceptable range) and colour discrimination (the colour difference ΔE2000 calculated from the corresponding colour sample combinations exceeded the lower permissible limit for the selected discrimination points). This evaluation method and WSI scanner can contribute to accurate colour reproduction in digital pathology.

Low-cost visible spectrophotometer for detecting absorption and emission in metallic blends of colorful samples solution

The innovative, affordable assembled visible spectrophotometer employed in this study aims to analyze the absorption and emission of colorful metallic blends of colorful samples solution. It features a tungsten white light bulb source, an ammeter as a detection element, a digital voltmeter, a diffraction grating for light dispersion, a converging lens for light collimation, and filters of various wavelengths (blue, red, yellow, and yellow-green). The light bulb source was powered by a standard supply set at 6 V. Using metallic solutions of chromium chloride (CrCl3) and copper sulphate (CuSO4) with different filter wavelengths, the performance was assessed. The transmittance and absorbance of these metallic solution samples exhibit a linear relationship with approximately 3 % deviation compared to results from a commercial UV–VIS spectrophotometer (DR-6000). Similar investigations were conducted with equivalent quantities of CuSO4, CrCl3, and nickel chloride (NiCl2) solutions, showing a discrepancy ranging from 2 % to 8 % when compared with the commercial UV–VIS spectrophotometer. Therefore, in low-income countries like Ethiopia, colorful metallic solution samples can be effectively analyzed using the newly designed low-cost spectrophotometer.

DESI complete calibration of the colour–redshift relation (DC3R2): results from early DESI data

ABSTRACT We present initial results from the Dark Energy Spectroscopic Instrument (DESI) complete calibration of the colour–redshift relation (DC3R2) secondary target survey. Our analysis uses 230 k galaxies that overlap with KiDS-VIKING ugriZYJHKs photometry to calibrate the colour–redshift relation and to inform photometric redshift (photo-z) inference methods of future weak lensing surveys. Together with emission line galaxies (ELGs), luminous red galaxies (LRGs), and the Bright Galaxy Survey (BGS) that provide samples of complementary colour, the DC3R2 targets help DESI to span 56 per cent of the colour space visible to Euclid and LSST with high confidence spectroscopic redshifts. The effects of spectroscopic completeness and quality are explored, as well as systematic uncertainties introduced with the use of common Self-Organizing Maps trained on different photometry than the analysis sample. We further examine the dependence of redshift on magnitude at fixed colour, important for the use of bright galaxy spectra to calibrate redshifts in a fainter photometric galaxy sample. We find that noise in the KiDS-VIKING photometry introduces a dominant, apparent magnitude dependence of redshift at fixed colour, which indicates a need for carefully chosen deep drilling fields, and survey simulation to model this effect for future weak lensing surveys.

Sulfidation of Iron - Based Nanomaterial as Catalyst for Water Splitting Using Hydrothermal

Consumption of fossil fuels causes greenhouse effect and global warming, hence the need for renewable energy sources that are environmentally friendly. Hydrogen is one of the abundant elements on earth. Hydrogen refers to a clean and renewable energy source, hydrogen can be a good choice to reduce greenhouse gas emissions. One way to produce hydrogen is by electrochemical water splitting. This study aims to determine the characterization of iron-based nanomaterials (iron sulfide - iron hydroxide) as a water splitting catalyst in general. Iron sulfide synthesis was carried out using hydrothermal sulfidation method for 6 hours at 80 oC with nickel foam as substrate. Synthesis of iron sulfide varying the concentration of sodium sulfide nonahydrate (0.0125 M, 0.025 M, 0.05 M and 0.1 M) produced brownish yellow to blackish grey colored samples. Characterization results using XRD showed that iron sulfide peaks were detected at higher concentrations of sodium sulfide nonahydrate. Based on the results of analyzing iron hydroxide using SEM, it is known that the sample is in the form of nano walls and on iron sulfide, it is known that the sample is in the form of nanoscale particles. Based on electrochemical measurement results, iron hydroxide can be a good catalyst for hydrogen evolution reaction (HER) compared with commercial Pt/C. The overpotential of iron hydroxide is smaller than Pt/C, which is only 15 mV at a current density 10 mA/cm2 and iron sulfide can be a good catalyst for oxygen evolution reaction (OER) with electrocatalytic measurement results close to commercial RuO2. This is indicated by the small overpotential (260 mV at current densisty 10 mA/cm2 and small tafel slope (51 mV/dec).

An Unknown 18th-Century Flemish Dyers Manuscript from Antwerp (1778–1802)

This paper presents a historical analysis of a rare dyer’s manuscript, preserved within the Museum of Industry in Ghent, Belgium. The manuscript, originating from a dyer in late 18th-century Antwerp, includes an extensive collection of recipes. The study will enable researchers to better grasp the practices of traditional dyeing techniques and materials in the region during that time. The manuscript focuses primarily on the dyeing of woolen fabrics. Approximately 90 of the 132 recipes utilize red dyes. Recipes for dying orange, brown, black, blue, and green colors are also described. The document mentions the use of madder, brazilwood, redwood, and cochineal. To create a variety of red shades, the dyer describes how fabrics were treated with different mordanting compounds, with alum and tin as the main ingredients, and how the dyeing solutions were prepared. The resulting colors include ‘madder red’, ‘formal red’, ‘crimson’, ‘scarlet’, ‘Turkish red’, ‘fire color’ and ‘flesh color’. In addition to the dyeing recipes, the manuscript contains various accounting documents and correspondences between the dyer, customers, and suppliers. Lastly, over 100 original, colored samples are attached to the described recipes. In this paper, the artifact’s contents will be disclosed, comprising recipes with attached samples and correspondence. Findings resulting from archive research will be included, contextualizing and placing the dyer in their urban and social context. The paper concludes by discussing its potential limitations and provides avenues for possible future research.

Reducing racial bias in scientific communication: Journal policies and their influence on reporting racial demographics.

Research titles with White samples, compared to research titles with samples of color, have been less likely to include the racial identity of the sample. This unequal writing practice has serious ramifications for both the history and future of psychological science, as it solidifies in the permanent scientific record the false notion that research with White samples is more generalizable and valuable than research with samples of color. In the present research, we experimentally tested the extent to which PhD students (63% White students, 27% students of color) engaged in this unequal writing practice, as well as the extent to which this practice might be disrupted by journal policies. In Study 1, PhD students who read about research conducted with a White sample, compared to those who read about the exact same research conducted with a Black sample, were significantly less likely to mention the sample's racial identity when generating research titles, keywords, and summaries. In Study 2, PhD students instructed to mention the racial identity of their samples, and PhD students instructed to not mention the identity of their samples (though to a lesser extent), were less likely to write about the White versus Black samples unequally. Across both studies, we found that PhD students were overall supportive of a policy to make the racial demographics of samples more transparent, believing that it would help to reduce racial biases in the field. (PsycInfo Database Record (c) 2024 APA, all rights reserved).

Evaluation of the performance of a three-strains lactic acid bacteria cocktail for the control of Listeria monocytogenes on marinated lean pork

The aim of this study was to evaluate the addition of a cocktail of three lactic acid bacteria (LAB) (Lactococcus lactis, Lacticaseibacillus paracasei and Lactiplantibacillus plantarum) as a protective culture into marinated pork. The pork was artificially inoculated with two Listeria monocytogenes strains and stored for 12 days. Two packagings were used: vacuum or modified atmosphere packaging (MAP). LAB, L. monocytogenes, psychrotrophic bacteria, pH, aw, color, the metataxonomic profile and the sensorial quality of the product were evaluated. The growth of L. monocytogenes under vacuum and MAP was reduced with the use of the LAB up to 0.8 and 0.7 log10 CFU/g, respectively. LAB counts gradually increased, which was accompanied by a slight decrease in pH. In LAB samples, psychrotrophic bacteria showed a reduction at day 12 as compared to non-inoculated samples. Some minor differences were also observed among samples for color and sensory parameters. Regardless of the type of packaging, the microbiota of the marinated pork was dominated initially by Photobacterium and subsequently during storage by a diversity of LAB. The application of LAB could help to obtain a safe product, although further evaluation would be required to optimize the application of the LAB cocktail in real-scale commercial scenarios.

Cold-Flow Properties of Estolides: The Older (D97 and D2500) versus the Mini-(D5773 and D5949) Methods

There is growing research on developing new and sustainable lubricants. Sustainable lubricants with adequate cold-flow properties are of particular interest for many applications. One limitation of the established methods for measuring cold flow properties is the large volume needed to test samples. This makes initial screening of many hard-to-synthesize samples difficult. In the current study, we compared the results of the older, widely accepted ASTM methods D97 (pour point, PP) and D2500 (cloud point, CP) to the newer, smaller-volume, and easier-to-perform methods D5949 and D5773 for bio-based base oils (estolides and iso-estolides). The CP results were in good agreement for less colored samples, but D5773 gave lower values for some darker (Gardner color &gt;8) samples, especially esters. The D5949 showed a tendency to report slightly higher PP, especially for the lower values. Viscosities and densities in a wide temperature range (15 to 120 °C) were also measured. The surface tensions were estimated by a literature group method. Viscosity and density effects can only partially explain the differences in the PP values from the two methods. In conclusion, the newer mini-methods are an acceptable substitution when larger volumes are not accessible, unless the sample is too dark.

Exploring Digital Gingival Shade Matching in Students.

To study the degree of accuracy in gingival shade matching of undergraduate students using a computer application. In total, 76 undergraduate dental students' gingival shade selection abilities were evaluated using an in-house developed computer application. A total of 15 intraoral gingival photographs and 21 pink gingival color porcelain samples were used. The environmental conditions were standardized, and no time limit was set for answering in the computer application. Fourteen gingival color samples (66.6%) were not useful for representing the studied gingival shades. Not all natural gingival colors studied were represented within the 50.50% acceptability limits of the pink samples. There were no statistically significant differences between men and women in terms of "hit" percentages. The highest correlation coefficient (in absolute value) was for the L* coordinate (the darker the gingiva in the picture, the higher the hit rate for choosing the "ideal" shade tab); however, none of the linear correlation coefficients were statistically significant. Not all colors provided in the pink ceramic system were useful for subjective gingival selection. There were no statistically significant differences between male and female dental students in gingival color perception. The L* coordinate was the only one that influenced the correct perception of gingival color by dental students, and it did so more in women than in men.

Environmental color analysis and facade color design in a street rehabilitation: Adana, Kayalıbağ

AbstractStreets and buildings that become inactive within the historical texture of cities can be restored to the district through rehabilitation projects and color designs, which encourage urbanites to use them more actively. Such spaces are especially important for urban memory, yet they risk losing their integrity over time due to uncontrolled development. Therefore, making them available for urban use is important for socio‐cultural and economic development. This study involves the application, under a rehabilitation project, of a holistic approach to façade color design for buildings located on two streets in the center of Adana, a city in southern Turkey that dates back to the Common Era. The study began with collecting color samples from the area as part of environmental color analyses, after which the colors of the samples were measured. In line with the environmental characteristics that affect color perception, a range of colors with Munsell's equivalent value and hue contrast was considered appropriate for application to the facades of buildings in the Kayalıbağ neighborhood. In the color design, five different hues with high‐value (light) and low chroma were selected to increase the attractiveness of the historically and archeologically highly significant district. The aim of the color design was to increase the livability and attractiveness of the district, while not overshadowing the cultural qualities of the urban environment.

Rapid analysis and authentication of Chinese propolis using nanoelectrospray ionization mass spectrometry combined with machine learning

In this study, we established a simple, rapid, and high-throughput method for the analysis and classification of propolis samples. We utilized nanoESI-MS to analyze 37 samples of propolis from China for the first time, obtaining characteristic fingerprint spectra in negative ion mode, which were then integrated with multivariate analysis to explore variations between water extract of propolis (WEP) and ethanol extract of propolis (EEP). Furthermore, we categorized propolis samples based on different climate zones and colors, screening 10 differential metabolites among propolis from various climate zones, and 11 differential metabolites among propolis samples of different color. By employing machine learning models, we achieved high-precision discrimination and prediction between samples from different climate zones and colors, achieving predictive accuracies of 95.6% and 85.6%, respectively. These results highlight the significant potential of the nanoESI-MS coupled with machine learning methodology for precise classification within the realm of food products.

Union Dyeing of Cotton-Silk Blended Woven Fabric Using Tanin Bio-mordant and Thyme as a Colourant

The study explores the application of tea leaf-extracted tannin as a bio-mordant and thyme extract as a natural dye on cationized silk-cotton blend fabric to enhance colour fastness and absorption. The colour strength and depth (shown as DL, Da, and Db values) on silk-cotton blend fabric were investigated in the CIE lab test. The results showed that temperature, shade percentage, and mordanting had a substantial impact on the dyeing process efficacy at DL = 30.61, Da = 11.49 and Db = 12.77. When the temperature was raised to 90 °C and the dye content was increased to 120%, the dyed sample's colour fastness (as measured by wash, rubbing, and perspiration) significantly improved, acquiring a grade of 4 to 5, which indicates good to excellent. There was a slight change in wet rubbing fastness from grade 3 to grade 4, indicating good to fair. The K/S values of the silk and cotton fibres, which ranged from 8.89 to 7.94 on average, respectively, demonstrated that the processes of bio-mordanting and cationization enhanced the absorption of dye. Tensile strength and extension increased in the weft direction to 22.19 N force and 5.21% extension at break, while the warp direction showed a fall to 6.63 N force and a rise in extension of 0.72%. FTIR spectroscopy confirmed the presence of Amino (N-H) bonds, Carbohydrate bonds (CH), Tannins, and Terpenoid phytochemicals of thyme in the dyed sample. The study highlights the potential of thyme extract as a natural dye and its benefits in improving the dyeing properties of silk-cotton blend fabric.

Quality of Colour Rendering in Photographic Scenes Illuminated by Light Sources with Light-Shaping Attachments

In both commercial and scientific photography, achieving accurate colour reproduction is essential. This study investigates the influence of light-shaping attachments on colour rendering indices (CRIs) under various lighting conditions. Through 180 measurements of different lighting combinations, statistical analysis reveals significant interactions between light sources, modifiers, and CRI test colour samples (TCS). Snoots consistently produce superior CRIs, while interactions between light sources and other light modifiers vary, affecting CRIs differently based on spectral distributions and material properties of the modifiers. Combining light sources and modifiers from the same manufacturer is found to enhance colour accuracy. These findings offer valuable insights for photographers, highlighting the importance of understanding light properties and light-shaping attachment effects on colour rendition. By informing best practices, this research contributes to achieving high-quality photographs across commercial and scientific domains, ensuring both accurate data representation and visually appealing results.