Colloidal Semiconductor Quantum Dots Research Articles

Lower-Temperature Nucleation and Growth of Colloidal CdTe Quantum Dots Enabled by Prenucleation Clusters with Cd-Te Bond Conservation.

The reason why heating is required remains elusive for the traditional synthesis of colloidal semiconductor quantum dots (QDs) of II-VI metal chalcogenide (ME). Using CdTe as a model system, we show that the formation of Cd-Te covalent bonds with individual Cd- and Te-containing compounds can be decoupled from the nucleation and growth of CdTe QDs. Prepared at an elevated temperature, a prenucleation-stage sample contains clusters that are the precursor compound (PC) of magic-size clusters (MSCs); the Cd-Te bond formation occurs at temperatures higher than 120 °C in the reaction. Afterward, the PC-to-QD transformation appears via monomers at lower temperatures in dispersion. Our findings suggest that the number of Cd-Te bonds broken in the PC reactant is similar to that of Cd-Te bonds formed in the QD product. For the traditional synthesis of ME QDs, heating is responsible for the M-E bond formation rather than for nucleation.

The influence of solvent refractive index on the photoluminescence decay of thick-shell gradient-alloyed colloidal quantum dots investigated in a wide range of delay times.

Colloidal semiconductor quantum dots have many potential optical applications, including quantum dot light-emitting diodes, single-photon sources, or biological luminescent markers. The optical properties of colloidal quantum dots can be affected by their dielectric environment. This study investigated the photoluminescence (PL) decay of thick-shell gradient-alloyed colloidal semiconductor quantum dots as a function of solvent refractive index. These measurements were conducted in a wide range of delay times to account for both the initial spontaneous decay of excitons and the delayed emission of excitons that has the form of a power law. It is shown that whereas the initial spontaneous PL decay is very sensitive to the refractive index of the solvent, the power-law delayed emission of excitons is not. Our results seem to exclude the possibility of carrier self-trapping in the considered solvents and suggest the existence of trap states inside the quantum dots. Finally, our data show that the average exciton lifetime significantly decreases as a function of the solvent refractive index. The change in exciton lifetime is qualitatively modeled and discussed.

Pathway of Room-Temperature Formation of CdSeS Magic-Size Clusters from Mixtures of CdSe and CdS Samples.

The synthetic application of prenucleation-stage samples of colloidal semiconductor quantum dots (QDs) is in its infancy. It is shown that when two prenucleation-stage samples of binary CdSe and CdS are mixed, ternary CdSeS magic-size clusters (MSCs) grow at room temperature in dispersion. As the amount of the CdS sample increases, the optical absorption of the CdSeS MSCs blueshifts from ≈380 to ≈360 nm. It is proposed that the cluster in the CdSe sample reacts with the CdS monomer from the CdS sample. The monomer substitution reaction of CdSe by CdS can proceed continuously; thus, CdSeS MSCs with tunable compositions are obtained. The present study provides compelling evidence that clusters formed in the prenucleation stage of QDs. The clusters are precursor compounds (PCs) of MSCs, transforming at room temperature with the thermoneutrality principle of isodesmic reactions. The nucleation and growth of QDs follows a multi-step non-classical instead of one-step classical nucleation model.

Emission behaviour of CdTe/SiO2 core/shell quantum dots in external electric field

Optical properties of CdTe/SiO2 core/shell colloidal quantum dots were investigated in external electric field in the range of 0–140 kV/cm. Maximum of photoluminescence intensity was centered at 2.39 eV with the full width at half maximum of 0.26 eV. It was found that the photoluminescence intensity of quantum dots tends to decrease by 22% and the integrated luminescence intensity tends to decrease by 23% with increasing electric field to the maximum value. However, an increase in the integrated luminescence intensity in the region of 60 kV/cm was observed. We show that both interband and trap-state luminescence is affected by an external electric field with no Stark shift observed. Based on these results, we propose that relaxation of the excited states in CdTe/SiO2 core/shell colloidal quantum dots exposed to an external electric field is affected by two field-dependent mechanisms, i.e. field-induced quenching of luminescence and blocking of charge carrier trapping. The obtained results can be useful to gain better understanding of the electric field effect on the optical properties of CdTe/SiO2 colloidal semiconductor quantum dots and, in particular, on the operation of hybrid organic-inorganic LEDs with emitting layers based on the studied nanocrystals.

Optical Activity and Excitonic Characteristics of Chiral CdSe Quantum Dots.

Introduction of chirality to colloidal semiconductor quantum dots (QDs) triggers a chiroptical effect. However, there remains a knowledge gap in the mechanism of chirality transfer and amplification from molecules to QDs. By time-dependent density functional theory calculations combined with a correlated electron-hole picture, we explored the chiroptical activity of CdSe QDs decorated with different chiral monocarboxylic acids from an excitonic perspective. Our calculations showed strong circular dichroism (CD) signals in the visible region for the chiral CdSe QDs. The excitonic states with large CD originate from QDs, while the chiral molecules break the orthogonality between electric and magnetic transition dipoles, which synergistically facilitates the prominent dissymmetric effect. The considered monocarboxylic acid chiral molecules all favor the bidentate adsorption configuration of the carboxyl group on the CdSe surface, endowing an identical CD signature but distinct excitonic characteristics. These findings are crucial for the regulation of chirality and excitons in semiconductor QDs to develop excitonic devices.

Direct Visualization of Confinement and Many‐Body Correlation Effects in 2D Spectroscopy of Quantum Dots

AbstractThe size tunable color of colloidal semiconductor quantum dots (QDs) is probably the most elegant illustration of the quantum confinement effect. As explained by the simple “particle‐in‐a‐box” model, the transition energies between the levels increase when the “box” becomes smaller. To investigate quantum confinement effects, typically a well‐defined narrow size distribution of the nanoparticles is needed. In this contribution, how coherent electronic two‐dimensional spectroscopy (2DES) can directly visualize the quantum size effect in a sample with broad size distribution of QDs is demonstrated. The method is based on two features of the 2DES – the ability to resolve inhomogeneous broadening and the capability to reveal correlations between the states. In QD samples, inhomogeneous spectral broadening is mainly caused by the size distribution and leads to elongated diagonal peaks of the spectra. Since the cross peaks correlate the energies of two states, they allow drawing conclusions about the size dependence of the corresponding states. It is also found that the biexciton binding energy changes between 3 and 8 meV with the QD size. Remarkably, the size dependence is non‐monotonic with a clear minimum.

Rational ligand design for enhanced carrier mobility in self-powered SWIR photodiodes based on colloidal InSb quantum dots.

Solution-processed colloidal III-V semiconductor quantum dot photodiodes (QPDs) have potential applications in short-wavelength infrared (SWIR) imaging due to their tunable spectral response range, possible multiple-exciton generation, operation at 0-V bias voltage and low-cost fabrication and are also expected to replace lead- and mercury-based counterparts that are hampered by reliance on restricted elements (RoHS). However, the use of III-V CQDs as photoactive layers in SWIR optoelectronic applications is still a challenge because of underdeveloped ligand engineering for improving the in-plane conductivity of the QD assembled films. Here, we report on ligand engineering of InSb CQDs to enhance the optical response performance of self-powered SWIR QPDs. Specifically, by replacing the conventional ligand (i.e., oleylamine) with sulfide, the interparticle distance between the CQDs was shortened from 5.0 ± 0.5 nm to 1.5 ± 0.5 nm, leading to improved carrier mobility for high photoresponse speed to SWIR light. Furthermore, the use of sulfide ligands resulted in a low dark current density (∼nA cm-2) with an improved EQE of 18.5%, suggesting their potential use in toxic-based infrared image sensors.

Thermally-Induced Isomerization of Prenucleation Clusters During the Prenucleation Stage of CdTe Quantum Dots.

The evolution of prenucleation clusters in the prenucleation stage of colloidal semiconductor quantum dots (QDs) has remained unexplored. With CdTe as a model system, we show that substances form and isomerize prior to the nucleation and growth of QDs. Called precursor compounds (PCs), the prenucleation clusters are relatively optically transparent and can transform to absorbing magic-size clusters (MSCs). When a prenucleation-stage sample at 25, 45, or 80 °C is dispersed in a mixture of cyclohexane (CH) and octylamine (OTA) at room temperature, either MSC-371, MSC-417, or MSC-448 evolves with absorption peaking at 371, 417, or 448 nm, respectively. We propose that PC-371 forms at 25 °C, and isomerizes to PC-417 at 45 °C and to PC-448 at 80 °C. The PCs and MSCs are quasi isomers. Relatively large and small amounts of OTA favor PC-371 and PC-448 in dispersion, respectively. The present findings suggest the existence of PC-to-PC isomerization in the QD prenucleation stage.

Thermally‐Induced Isomerization of Prenucleation Clusters During the Prenucleation Stage of CdTe Quantum Dots

AbstractThe evolution of prenucleation clusters in the prenucleation stage of colloidal semiconductor quantum dots (QDs) has remained unexplored. With CdTe as a model system, we show that substances form and isomerize prior to the nucleation and growth of QDs. Called precursor compounds (PCs), the prenucleation clusters are relatively optically transparent and can transform to absorbing magic‐size clusters (MSCs). When a prenucleation‐stage sample at 25, 45, or 80 °C is dispersed in a mixture of cyclohexane (CH) and octylamine (OTA) at room temperature, either MSC‐371, MSC‐417, or MSC‐448 evolves with absorption peaking at 371, 417, or 448 nm, respectively. We propose that PC‐371 forms at 25 °C, and isomerizes to PC‐417 at 45 °C and to PC‐448 at 80 °C. The PCs and MSCs are quasi isomers. Relatively large and small amounts of OTA favor PC‐371 and PC‐448 in dispersion, respectively. The present findings suggest the existence of PC‐to‐PC isomerization in the QD prenucleation stage.

Dipolar Ligands Tune Plasmonic Properties of Tin-Doped Indium Oxide Nanocrystals.

Surface functionalization with dipolar molecules is known to tune the electronic band alignment in semiconductor films and colloidal quantum dots. Yet, the influence of surface modification on plasmonic nanocrystals and their properties remains little explored. Here, we functionalize tin-doped indium oxide nanocrystals (ITO NCs) via ligand exchange with a series of cinnamic acids with different electron-withdrawing and -donating dipolar characters. Consistent with previous reports on semiconductors, we find that withdrawing (donating) ligands increase (decrease) the work function caused by an electrostatic potential shift across the molecular layer. Quantitative analyses of the plasmonic extinction spectra reveal that varying the ligand molecular dipole affects the near-surface depletion layer, with an anticorrelated trend between the electron concentration and electronic volume fraction, factors that are positively correlated in as-synthesized NCs. Electronic structure engineering through surface modification provides access to distinctive combinations of plasmonic properties that could enable optoelectronic applications, sensing, and hot electron-driven processes.

Electric-field-induced colour switching in colloidal quantum dot molecules at room temperature.

Colloidal semiconductor quantum dots are robust emitters implemented in numerous prototype and commercial optoelectronic devices. However, active fluorescence colour tuning, achieved so far by electric-field-induced Stark effect, has been limited to a small spectral range, and accompanied by intensity reduction due to the electron-hole charge separation effect. Utilizing quantum dot molecules that manifest two coupled emission centres, we present a unique electric-field-induced instantaneous colour-switching effect. Reversible emission colour switching without intensity loss is achieved on a single-particle level, as corroborated by correlated electron microscopy imaging. Simulations establish that this is due to the electron wavefunction toggling between the two centres, induced by the electric field, and affected by the coupling strength. Quantum dot molecules manifesting two coupled emission centres may be tailored to emit distinct colours, opening the path for sensitive field sensing and colour-switchable devices such as a novel pixel design for displays or an electric-field-induced colour-tunable single-photon source.

Nanoscale LiZnN - Luminescent Half-Heusler Quantum Dots.

Colloidal semiconductor quantum dots are a well-established technology, with numerous materials available either commercially or through the vast body of literature. The prevalent materials are cadmium-based and are unlikely to find general acceptance in most applications. While the III-V family of materials is a likely substitute, issues remain about its long-term suitability, and other earth-abundant materials are being explored. In this report, we highlight a nanoscale half-Heusler semiconductor, LiZnN, composed of readily available elements as a potential alternative system to luminescent II-VI and III-V nanoparticle quantum dots.

Highly polarized light emission from hybrid of quantum dots and plasmons in the intermediate coupling regime.

Colloidal semiconductor quantum dots (QDs), with a size tunable bandgap and remarkably high quantum efficiency, have been recognized as ideal light sources in quantum information and light emitting devices. For light sources, besides the emission intensity and spectral profile, the degree of polarization (DoP) is an essential parameter. Here, by embedding a monolayer of QDs inside the nanogap between a bottom Au mirror and a top Ag nanowire, we have demonstrated highly polarized light emission from the QDs with an average DoP of 0.89. In addition to the anisotropic photoluminescence (PL) intensity, the PL spectra are distinct at different polarizations, with an asymmetric spectral shape or even two-peak features. Such an anisotropic emission behavior arises from the coupling between the QDs and the largely confined and polarization-dependent gap-plasmons in the Au/QD/Ag nanocavities in the intermediate coupling regime. Our results demonstrate the possibility of achieving highly polarized light sources by coupling spherical QDs to single anisotropic plasmonic nanocavities, to provide new opportunities in the future design of polarized QD-based display devices.

Tetrameric Antibody Complexes and Affinity Tag Peptides for the Selective Immobilization and Imaging of Single Quantum Dots.

Colloidal semiconductor quantum dots (QDs) are of widespread interest as fluorescent labels for bioanalysis and imaging applications. Single-particle measurements have proven to be a very powerful tool for better understanding the fundamental properties and behaviors of QDs and their bioconjugates; however, a recurring challenge is the immobilization of QDs in a solution-like environment that minimizes interactions with a bulk surface. Immobilization strategies for QD-peptide conjugates are particularly underdeveloped within this context. Here, we present a novel strategy for the selective immobilization of single QD-peptide conjugates using a combination of tetrameric antibody complexes (TACs) and affinity tag peptides. A glass substrate is modified with an adsorbed layer of concanavalin A (ConA) that binds a subsequent layer of dextran that minimizes nonspecific binding. A TAC with anti-dextran and anti-affinity tag antibodies binds to the dextran-coated glass surface and to the affinity tag sequence of QD-peptide conjugates. The result is spontaneous and sequence-selective immobilization of single QDs without any chemical activation or cross-linking. Controlled immobilization of multiple colors of QDs is possible using multiple affinity tag sequences. Experiments confirmed that this approach positions the QD away from the bulk surface. The method supports real-time imaging of binding and dissociation, measurements of Förster resonance energy transfer (FRET), tracking of dye photobleaching, and detection of proteolytic activity. We anticipate that this immobilization strategy will be useful for studies of QD-associated photophysics, biomolecular interactions and processes, and digital assays.

Enabling metallic behaviour in two-dimensional superlattice of semiconductor colloidal quantum dots

Semiconducting colloidal quantum dots and their assemblies exhibit superior optical properties owing to the quantum confinement effect. Thus, they are attracting tremendous interest from fundamental research to commercial applications. However, the electrical conducting properties remain detrimental predominantly due to the orientational disorder of quantum dots in the assembly. Here we report high conductivity and the consequent metallic behaviour of semiconducting colloidal quantum dots of lead sulphide. Precise facet orientation control to forming highly-ordered quasi-2-dimensional epitaxially-connected quantum dot superlattices is vital for high conductivity. The intrinsically high mobility over 10 cm2 V−1 s−1 and temperature-independent behaviour proved the high potential of semiconductor quantum dots for electrical conducting properties. Furthermore, the continuously tunable subband filling will enable quantum dot superlattices to be a future platform for emerging physical properties investigations, such as strongly correlated and topological states, as demonstrated in the moiré superlattices of twisted bilayer graphene.

Dextran-Functionalized Super-nanoparticle Assemblies of Quantum Dots for Enhanced Cellular Immunolabeling and Imaging

Colloidal semiconductor quantum dots (QDs) are a popular material for applications in bioanalysis and imaging. Although individual QDs are bright, some applications benefit from the use of even brighter materials. One approach to achieve higher brightness is to form super-nanoparticle (super-NP) assemblies of many QDs. Here, we present the preparation, characterization, and utility of dextran-functionalized super-NP assemblies of QDs. Amphiphilic dextran was synthesized and used to encapsulate many hydrophobic QDs via a simple emulsion-based method. The resulting super-NP assemblies or "super-QDs" had hydrodynamic diameters of ca. 90-160 nm, were characterized at the ensemble and single-particle levels, had orders-of-magnitude superior brightness compared to individual QDs, and were non-blinking. Additionally, binary mixtures of red, green, and blue (RGB) colors of QDs were used to prepare super-QDs, including colors difficult to obtain from individual QDs (e.g., magenta). Tetrameric antibody complexes (TACs) enabled simple antibody conjugation for selective cellular immunolabeling and imaging with both an epifluorescence microscope and a smartphone-based platform. The technical limitations of the latter platform were overcome by the increased per-particle brightness of the super-QDs, and the super-QDs outperformed individual QDs in both cases. Overall, the super-QDs are a very promising material for bioanalysis and imaging applications where brightness is paramount.

One-pot synthesis of multicolor carbon quantum dots: One as pH sensor, one with ultra-narrow emission as fluorescent sensor for uric acid

In this work, tricolor carbon quantum dots (CQDs) including blue-, green-, and orange-CQDs were prepared in one-pot. Impressively, the full width at half maximum of blue-CQDs narrowed greatly to 8 nm, serving as the narrowest bandwidth emissive CQDs so far, to our knowledge, which even compared to colloidal semiconductor quantum dots. Based on the blue-CQDs exhibited highly selective and sensitive ‘on-off’ response towards Fe3+ and the outstanding antioxidant properties of uric acid, we constructed ‘on-off-on’ switching sensor to achieve quantitative measurement of uric acid. The green-CQDs served as simple pH sensor qualitatively judging acid rain based on ultrasensitive spectral redshift property at pH < 5.6. The sensors based on CQDs withstood actual sample matrix effects, pH and temperature change, and long-term storage. The ultra-narrow bandwidth emissive CQDs and fluorescent sensors based on distinctive optical properties of CQDs are meaningful and attractive research directions.

Strongly Confined CsPbBr3 Quantum Dots as Quantum Emitters and Building Blocks for Rhombic Superlattices.

The success of the colloidal semiconductor quantum dots (QDs) field is rooted in the precise synthetic control of QD size, shape, and composition, enabling electronically well-defined functional nanomaterials that foster fundamental science and motivate diverse fields of applications. While the exploitation of the strong confinement regime has been driving commercial and scientific interest in InP or CdSe QDs, such a regime has still not been thoroughly explored and exploited for lead-halide perovskite QDs, mainly due to a so far insufficient chemical stability and size monodispersity of perovskite QDs smaller than about 7 nm. Here, we demonstrate chemically stable strongly confined 5 nm CsPbBr3 colloidal QDs via a postsynthetic treatment employing didodecyldimethylammonium bromide ligands. The achieved high size monodispersity (7.5% ± 2.0%) and shape-uniformity enables the self-assembly of QD superlattices with exceptional long-range order, uniform thickness, an unusual rhombic packing with an obtuse angle of 104°, and narrow-band cyan emission. The enhanced chemical stability indicates the promise of strongly confined perovskite QDs for solution-processed single-photon sources, with single QDs showcasing a high single-photon purity of 73% and minimal blinking (78% "on" fraction), both at room temperature.

Optically Excited Lasing in a Cavity-Based, High-Current-Density Quantum Dot Electroluminescent Device.

Laser diodes based on solution-processable materials can benefit numerous technologies including integrated electronics and photonics, telecommunications, and medical diagnostics. An attractive system for implementing these devices is colloidal semiconductor quantum dots (QDs). The progress towards a QD laser diode has been hampered by rapid nonradiative Auger decay of optical-gain-active multicarrier states, fast device degradation at high current densities required for laser action, and unfavorable competition between optical gain and optical losses in a multicomponent device stack. Hereweresolve some of these challenges and demonstrate optically excited lasing from fully functional high-current density electroluminescent (EL) devices with an integrated optical resonator. This advance has become possible due to excellent optical gain properties of continuously graded QDs and a refined device architecture, which allows for highly efficient light amplification in a thin, EL-active QD layer.

Electronic structure study of dual-doped II-VI semiconductor quantum dots towards single-source white light emission.

Single-source white light emitting colloidal semiconductor quantum dots (QDs) is one of the most exciting and promising high-quality solid-state light sources to meet the current global demand for sustainable resources. While most of the previous methods involve dual (green-red) emissive nanostructures coated on blue LEDs to achieve white light, this work describes a single-source white light emitter of robust and superior quality using dual-doping. A modified synthesis method for intense white light emitting Cu, Mn dual-doped ZnSe QDs is engineered such that the extent of doping and concentration of ligands can alter their electronic structures. This is then customized to obtain various types of white light emissions ranging from warm white to cool white. Further, the composition-driven change in the electronic structure of the host QDs is exploited to achieve emission tunability over the entire visible range.