Colloidal Semiconductor Nanocrystals Research Articles

Observation of Three-Photon Cascaded Emission from Triexcitons in Giant CsPbBr3 Quantum Dots at Room Temperature.

Colloidal semiconductor nanocrystals have long been considered a promising source of time-correlated and entangled photons via the cascaded emission of multiexcitonic states. The spectroscopy of such cascaded emission, however, is hindered by efficient nonradiative Auger-Meitner decay, rendering multiexcitonic states nonemissive. Here we present room-temperature heralded spectroscopy of three-photon cascades from triexcitons in giant CsPbBr3 nanocrystals. We show that this system exhibits second- and third-order correlation function values, g(2)(0) and g(3)(0,0), close to unity, identifying very weak binding of both biexcitons and triexcitons. Combining fluorescence lifetime analysis, photon statistics, and spectroscopy, we can readily identify emission from higher multiexcitonic states. We use this to verify emission from a single emitter despite high emission quantum yields of multiply excited states and comparable emission lifetimes of singly and multiply excited states. Finally, we present potential pathways toward control of the photon number statistics of multiexcitonic emission cascades.

Deciphering Surface Ligand Density of Colloidal Semiconductor Nanocrystals: Shape Matters.

Surface chemistry of colloidal semiconductor nanocrystals (NCs) is of paramount importance because it profoundly impacts their physical and chemical properties, processing, and performance. Herein, we report the effect of the shape of ZnS NCs in terms of nanodots, nanorods, and nanoplatelets (NPL) on the surface ligand density (LD) of the commonly used oleylamine (OLA) ligand by combining three experimental quantification techniques (e.g., thermogravimetric analysis-differential scanning calorimetry, 1H nuclear magnetic resonance spectroscopy, and inductively coupled plasma-optical emission spectrometry) with the semiempirical molecular dynamics (MD) simulations. Consistent results on the surface LD derived by the aforementioned three independent techniques were obtained, presenting an ascending order of LDdots < LDrods < LDNPLs. MD simulations reveal that the highest LD for ZnS NPLs can be attributed to their extremely flat and uniform surfaces with regular distribution of surface Zn atoms for the OLA molecules to achieve parallel and tight stacking, while for ZnS nanodots and nanorods, their surfaces may have staggered arrangement and multisteps, making it unlikely for the OLA ligand to adopt the tight ligand stacking mode. The finding revealed in this work not only sheds light on the constitution of the molecule ligand shell of NCs, which is helpful for their rational morphology control, but also provides an additional and important knob for tuning their chemical functionality.

Plasmon‐Enhanced Fluorescence of NIR‐Emitting CdxHg1‐xTe Quantum Dots by Ag Nanoprisms

AbstractNear‐infrared (NIR)‐emitting colloidal semiconductor nanocrystals (NCs) draw a lot of attention due to various fields of their potential application, such as bio‐imaging, photovoltaics, photodetectors, light‐emitting diodes, and optical amplifiers for telecommunication. Since they typically suffer from the partial loss of their fluorescence in a solid state, strategies to increase their quantum yields are of outstanding importance. One of the means to improve it is their coupling with structures exhibiting localized surface plasmon resonance (LSPR). As demonstrated for the visible range of light, plasmon‐exciton interactions can enhance the photoluminescence (PL) of CdSe and CdTe NCs. In this work, the influence of the electromagnetic field of plasmonic silver NCs on the PL of CdxHg1–xTe NCs in the NIR region with a special emphasis on tuning the distance between these particle species is studied. In a series of samples prepared by a layer‐by‐layer deposition through polyelectrolytes, a 1.4‐fold PL enhancement at a distance of 9–11 nm between the two layers is observed, while at any other separation emission quenching is a dominating effect. These findings corroborate well with theoretical predictions of an emission increase at these specific distances and can be applied to other types of plasmonic and emitting materials.

(Invited) Photoluminescence Dynamics in PbS/CdS Core/Shell Nanocrystal Films: Carrier Recombination and Energy Transfer

Colloidal semiconductor nanocrystals (NCs) exhibit highly controllable size-dependent optical properties due to the quantum confinement effect. Among other semiconductor NCs, the lead chalcogenides, especially PbS, are one of the most studied and promising NC systems. They are the material of choice for studies of fundamental phenomena as well as for the development of solution processed infrared optoelectronic devices including LEDs, lasers, solar cells, and photodetectors. Compared to organically passivated NCs, the core-shell approach (more specifically PbS/CdS core-shell NCs) offers not only the improved stability and higher photoluminescence (PL) quantum efficiency but also an opportunity of the core/shell interface nano-engineering resulting in suppression of Auger recombination, reduction of the exciton radiative lifetime and an improved lasing threshold. However, despite more than a decade of detailed studies there are conflicting reports on PL dynamics in PbS/CdS core-shell NCs, and there is no accepted model explaining the observed PL lifetimes ranging from hundred nanoseconds to tens of microseconds. In this work we use time-resolved PL measurements and demonstrate that low-temperature PL dynamics in PbS/CdS core shell NCs show strong dependence on the PL detection wavelengths. The presented experimental results allow us to distinguish between processes of energy transfer and exciton recombination. We propose a model, which considers energy transfer between NCs and various mechanisms of exciton recombination (non-radiative, radiative, spin-flip, diffusion limited, etc.).

(Invited) Photon Upconversion: Getting Molecules and Nanocrystals to Talk Triplets

Photon upconversion offers the prospect of combining low energy near-infrared radiation to make high energy photons in the visible wavelengths to improve photovoltaics and introduce new bioimaging techniques. In order to harness the intrinsic ability of colloidal semiconductor nanocrystals to couple strongly with light, it is important to efficiently outcouple energy from photoexcited quantum dots (QDs), much like how nature uses molecular antennas to direct light during photosynthesis. This talk focuses on the organic-inorganic interface for triplet-fusion based photon upconversion, where orbital overlap between the QD donor and molecular acceptor is critical for efficient energy transduction. In the past 8 years, we have learnt a great deal about how the electronic interactions between chalcogenide nanocrystals and acene conjugated molecules affect the photon upconversion quantum yield. We apply the lessons learnt to extending photon upconversion to silicon nanocrystal light absorbers, addressing synthetic challenges with invaluable insight from time-resolved spectroscopy.

Molecular Triplet Generation Enabled by Adjacent Metal Nanoparticles.

High-efficiency generation of spin-triplet states in organic molecules is of great interest in diverse areas such as photocatalysis, photodynamic therapy, and upconversion photonics. Recent studies have introduced colloidal semiconductor nanocrystals as a new class of photosensitizers that can efficiently transfer their photoexcitation energy to molecular triplets. Here, we demonstrate that metallic Ag nanoparticles can also assist in the generation of molecular triplets in polycyclic aromatic hydrocarbons (PAHs), but not through a conventional sensitization mechanism. Instead, the triplet formation is mediated by charge-separated states resulting from hole transfer from photoexcited PAHs (anthracene and pyrene) to Ag nanoparticles, which is established through the rapid formation and subsequent decay of molecular anions revealed in our transient absorption measurements. The dominance of hole transfer over electron transfer, while both are energetically allowed, could be attributed to a Marcus inverted region of charge transfer. Owing to the rapid charge separation and the rapid spin-flip in metals, the triplet formation yields are remarkably high, as confirmed by their engagement in production of singlet oxygen with a quantum efficiency reaching 58.5%. This study not only uncovers the fundamental interaction mechanisms between metallic nanoparticles and organic molecules in both charge and spin degrees of freedom but also greatly expands the scope of triplet "sensitization" using inorganic nanomaterials for a variety of emerging applications.

Bismuth sulfide quantum dots-CsPbBr3 perovskite nanocrystals heterojunction for enhanced broadband photodetection

Colloidal semiconductor nanocrystals (NCs) or quantum dots (QDs) have shown great potential for solution-processable photodetector due to their exceptional optical and electronic properties. However, broadband and sensitive photodetection from single QDs- based devices is quite challenging. Nano-heterojunction with proper band alignment based on two different materials offers significant advantages for developing broadband photodetector. Herein, we report ultraviolet–visible (UV–Vis) to near-infrared (NIR) light-responsive photodetector based on solution-processed nano-heterojunction of visible light absorber CsPbBr3 perovskite NCs and wide absorption range, environment-friendly Bi2S3 QDs. Our results demonstrate that the CsPbBr3–Bi2S3 nano-heterojunction-based photodetector has higher responsivity (380 μA/W at a wavelength of 532 nm) and higher specific detectivity (1.02 × 105 Jones), as compared to the individual CsPbBr3 or Bi2S3 QDs based devices. Interestingly, the detection wavelength range of our heterojunction device is further extended to the near-infrared region (1064 nm) due to the broadband absorption range of Bi2S3 QDs, which is not observed in the visible light absorber CsPbBr3 devices. Remarkably, the responsivity of the heterojunction device is 90 μA W−1. The enhanced specific detectivity and the broadband response of hybrid devices are attributed to the improved charge carrier generation, efficient charge separation and transfer at the interface between CsPbBr3 and Bi2S3 QDs.

A high temperature in situ optical probe for colloidal nanocrystal synthesis.

We report on the fabrication and utilization of a robust high-temperature (>300 °C), adjustable-path-length, vacuum-tolerant, configurable, in situ optical probe, which interfaces with widely used chemical glassware via a 14/20 ground glass joint. This probe allows for high-speed reaction monitoring of colloidal semiconductor nanocrystal solutions at temperatures that were previously inaccessible. We demonstrate this capability by monitoring the hot-injection synthesis of CdSe quantum dots via UV-Vis absorption spectroscopy at 380 °C with a time resolution of ∼10ms, with the primary limitation being the acquisition and data saving rate of the commercial spectrometer used. We further demonstrate that this probe can also be used for in situ photoluminescence measurements. This system is generally applicable to harsh solution environments where optical monitoring of reaction progress is desirable and/or necessary.

Metal-Solvent Complex Formation at the Surface of InP Colloidal Quantum Dots.

The surface chemistry of colloidal semiconductor nanocrystals (QDs) profoundly influences their physical and chemical attributes. The insulating organic shell ensuring colloidal stability impedes charge transfer, thus limiting optoelectronic applications. Exchanging these ligands with shorter inorganic ones enhances charge mobility and stability, which is pivotal for using these materials as active layers for LEDs, photodetectors, and transistors. Among those, InP QDs also serve as a model for surface chemistry investigations. This study focuses on group III metal salts as inorganic ligands for InP QDs. We explored the ligand exchange mechanism when metal halide, nitrate, and perchlorate salts of group III (Al, In Ga), common Lewis acids, are used as ligands for the conductive inks. Moreover, we compared the exchange mechanism for two starting model systems: InP QDs capped with myristate and oleylamine as X- and L-type native organic ligands, respectively. We found that all metal halide, nitrate, and perchlorate salts dissolved in polar solvents (such as n-methylformamide, dimethylformamide, dimethyl sulfoxide, H2O) with various polarity formed metal-solvent complex cations [M(Solvent)6]3+ (e.g., [Al(MFA)6]3+, [Ga(MFA)6]3+, [In(MFA)6]3+), which passivated the surface of InP QDs after the removal of the initial organic ligand. All metal halide capped InP/[M(Solvent)6]3+ QDs show excellent colloidal stability in polar solvents with high dielectric constant even after 6 months in concentrations up to 74 mg/mL. Our findings demonstrate the dominance of dissociation-complexation mechanisms in polar solvents, ensuring colloidal stability. This comprehensive understanding of InP QD surface chemistry paves the way for exploring more complex QD systems such as InAs and InSb QDs.

Observation of negative surface and interface energies of quantum dots

Surface energy is a fundamental property of materials and is particularly important in describing nanomaterials where atoms or molecules at the surface constitute a large fraction of the material. Traditionally, surface energy is considered to be a positive quantity, where atoms or molecules at the surface are less thermodynamically stable than their counterparts in the interior of the material because they have fewer bonds or interactions at the surface. Using calorimetric methods, we show that the surface energy is negative in some prototypical colloidal semiconductor nanocrystals, or quantum dots with organic ligand coatings. This implies that the surface atoms are more thermodynamically stable than those on the interior due to the strong bonds between these atoms and surfactant molecules, or ligands, that coat their surface. In addition, we extend this work to core/shell indium phosphide/zinc sulfide nanocrystals and show that the interfacial energy between these materials is highly thermodynamically favorable in spite of their large lattice mismatch. This work challenges many of the assumptions that have guided thinking about colloidal nanomaterial thermodynamics, investigates the fundamental stability of many technologically relevant colloidal nanomaterials, and paves the way for future experimental and theoretical work on nanocrystal thermodynamics.

Charge Transfer from Quantum-Confined 0D, 1D, and 2D Nanocrystals.

The properties of colloidal quantum-confined semiconductor nanocrystals (NCs), including zero-dimensional (0D) quantum dots, 1D nanorods, 2D nanoplatelets, and their heterostructures, can be tuned through their size, dimensionality, and material composition. In their photovoltaic and photocatalytic applications, a key step is to generate spatially separated and long-lived electrons and holes by interfacial charge transfer. These charge transfer properties have been extensively studied recently, which is the subject of this Review. The Review starts with a summary of the electronic structure and optical properties of 0D-2D nanocrystals, followed by the advances in wave function engineering, a novel way to control the spatial distribution of electrons and holes, through their size, dimension, and composition. It discusses the dependence of NC charge transfer on various parameters and the development of the Auger-assisted charge transfer model. Recent advances in understanding multiple exciton generation, decay, and dissociation are also discussed, with an emphasis on multiple carrier transfer. Finally, the applications of nanocrystal-based systems for photocatalysis are reviewed, focusing on the photodriven charge separation and recombination processes that dictate the function and performance of these materials. The Review ends with a summary and outlook of key remaining challenges and promising future directions in the field.

Constructing ZnTe Spherical Quantum Well for Efficient Light Emission.

ZnTe colloidal semiconductor nanocrystals (NCs) have shown promise for light-emitting diodes (LEDs) and displays, because they are free from toxic heavy metals (Cd). However, so far, their low photoluminescence (PL) efficiency (∼30%) has hindered their applications. Herein, we devised a novel structure of ZnTe NCs with the configuration of ZnSe (core)/ZnTe (spherical quantum well, SQW)/ZnSe (shell). The inner layer ZnTe was grown at the surface of ZnSe core with avoiding using highly active and high-risk Zn sources. Due to the formation of coherently strained heterostructure which reduced the lattice mismatch, and the thermodynamic growth of ZnTe, the surface or interface defects were suppressed. A high PL efficiency of >60% was obtained for the green light-emitting ZnSe/ZnTe/ZnSe SQWs after ZnS outer layer passivation, which is the highest value for colloidal ZnTe-based NCs. This work paves the way for the development of novel semiconductor NCs for luminescent and display applications.

Biotinylated Photocleavable Semiconductor Colloidal Quantum Dot Supraparticle Microlaser.

Luminescent supraparticles of colloidal semiconductor nanocrystals can act as microscopic lasers and are hugely attractive for biosensing, imaging, and drug delivery. However, biointerfacing these to increase functionality while retaining their main optical properties remains an unresolved challenge. Here, we propose and demonstrate red-emitting, silica-coated CdSxSe1-x/ZnS colloidal quantum dot supraparticles functionalized with a biotinylated photocleavable ligand. The success of each step of the synthesis is confirmed by scanning electron microscopy, energy dispersive X-ray and Fourier transform infrared spectroscopy, ζ-potential, and optical pumping measurements. The capture and release functionality of the supraparticle system is proven by binding to a neutravidin functionalized glass slide and subsequently cleaving off after UV-A irradiation. The biotinylated supraparticles still function as microlasers; e.g., a 9 μm diameter supraparticle has oscillating modes around 625 nm at a threshold of 58 mJ/cm2. This work is a first step toward using supraparticle lasers as enhanced labels for bionano applications.

Optically Anisotropic Films of Colloidal Nanocrystals/Photoluminescent Dye Doped Polymers

Semiconductor colloidal nanocrystals are attractive materials since they can be adapted to polymers to form hybrid materials and are compatible with many optical applications. Here, synthesis of CdSe/CdS nanorods (NRs) via hot injection method is carried out, followed by preparation of hybrid polymer films from polyethylene glycol monomethyl ether-block-poly(glycidyl methacrylate)-block-poly[2-(diethylamino)ethyl methacrylate] triblock copolymer (MPEG-b-PGMA-b-DEAEMA) at a liquid-air interface. The optical properties of the films are finely adjusted to form optically anisotropic (i.e. dual-color emissive) films by using dyes for the other emitter as desired. Thiazolo[5,4-d] thiazole (TTz)-based dye and 6-carboxy fluorescein were used for this purpose. Tunable emission of TTz dye from blue to green dependent on changing pH value resulted in blue-green emissive polymer films, while red emission of CdSe/CdS NRs caused red emissive films. Phase separation of these materials is achieved by the hexane-insoluble nature of MPEG-b-PGMA-b-DEAEMA and the high solubility of NRs in it. These dual emissive films are promising candidates for waveguides and optical sensors.

Engineering colloidal semiconductor nanocrystals for quantum information processing.

Quantum information processing-which relies on spin defects or single-photon emission-has shown quantum advantage in proof-of-principle experiments including microscopic imaging of electromagnetic fields, strain and temperature in applications ranging from battery research to neuroscience. However, critical gaps remain on the path to wider applications, including a need for improved functionalization, deterministic placement, size homogeneity and greater programmability of multifunctional properties. Colloidal semiconductor nanocrystals can close these gaps in numerous application areas, following years of rapid advances in synthesis and functionalization. In this Review, we specifically focus on three key topics: optical interfaces to long-lived spin states, deterministic placement and delivery for sensing beyond the standard quantum limit, and extensions to multifunctional colloidal quantum circuits.

In situ Surface Reconstruction in Pure Water by Ice‐Confined Freeze‐Thaw Strategy for High‐Performance Core–Shell Structural Perovskite Nanocrystals

AbstractConstructing core–shell structure is recognized as an effective approach for the conventional colloidal semiconductor nanocrystals (NCs) to improve their stability and optical performance in optoelectronic applications. It is, however, still a challenge to develop green manufacture for core–shell lead halide perovskite NCs (PeNCs). Herein, an ice‐confined freeze‐thaw strategy using pure water solvent is devised, which results in the surface reconstruction of CsPbBr3 PeNCs thereby formatting the CsPb2Br5 shell on the CsPbBr3 core to achieve core–shell CsPbBr3@CsPb2Br5. The in situ formation of the CsPb2Br5 shell is attributed to the transformation of the intermediate polyhedral structure with the help of amphiphilic 4‐dodecylbenzene sulfonic acid ligand in the precursor solution. The PeNCs show ultrahigh photoluminescence quantum yield of 95%, remarkable stability and humidity‐resistance. Moreover, both light‐emitting diodes and stretchable fluorescence hydrogels based on the PeNCs exhibit a boosted optical performance and excellent operation stability. The organic solvent‐free and recyclability of this strategy pave a novel way to the environmentally friendly and large‐scale manufacture of high‐quality PeNCs for optoelectronic application.

Suppressed Magnitude of Spectral Diffusion in Cube-Shaped CdSe/CdS Core/Shell Nanocrystals with Exceedingly Stable Photoluminescence.

Colloidal semiconductor nanocrystals are promising candidates for quantum light sources, yet their application has been impeded by photoluminescence instability due to blinking and spectral diffusion. This study introduces a new category of cube-shaped CdSe/CdS core/shell nanocrystals with exceptionally stable photoluminescence characteristics. Under continuous excitation, the emissive quantum state remained consistent without alterations of the charge state for 4000 s, and the average photon energy variation stayed within the bounds of spectral resolution throughout this extended duration. Systematic examination of single-nanocrystal photoluminescence, upon variation of the core and shell dimensions, revealed that a thicker CdS shell and increased core edge length significantly curtail spectral diffusion, considering that the nanocrystals possess well-controlled CdSe-CdS and facet-ligand interfaces. This study advances the optimization of colloidal semiconductor nanocrystals as high-performance quantum light sources.

Controlled Growth of Large SiO2 Shells onto Semiconductor Colloidal Nanocrystals: A Pathway Toward Photonic Integration.

The growth of SiO2 shells on semiconductor nanocrystals is an established procedure and it is widely employed to provide dispersibility in polar solvents, and increased stability or biocompatibility. However, to exploit this shell to integrate photonic components on semiconductor nanocrystals, the growth procedure must be finely tunable and able to reach large particle sizes (around 100 nm or above). Here, we demonstrate that these goals are achievable through a design of experiment approach. Indeed, the use of a sequential full-factorial design allows us to carefully tune the growth of SiO2 shells to large values while maintaining a reduced size dispersion. Moreover, we show that the growth of a dielectric shell alone can be beneficial in terms of emission efficiency for the nanocrystal. We also demonstrate that, according to our modeling, the subsequent growth of two shells with increasing refractive index leads to an improved emission efficiency already at a reduced SiO2 sphere radius.

Exploiting Organometallic Chemistry to Functionalize Small Cuprous Oxide Colloidal Nanocrystals.

The ligand chemistry of colloidal semiconductor nanocrystals mediates their solubility, band gap, and surface facets. Here, selective organometallic chemistry is used to prepare small, colloidal cuprous oxide nanocrystals and to control their surface chemistry by decorating them with metal complexes. The strategy is demonstrated using small (3-6 nm) cuprous oxide (Cu2O) colloidal nanocrystals (NC), soluble in organic solvents. Organometallic complexes are coordinated by reacting the surface Cu-OH bonds with organometallic reagents, M(C6F5)2, M = Zn(II) and Co(II), at room temperature. These reactions do not disrupt the Cu2O crystallinity or nanoparticle size; rather, they allow for the selective coordination of a specific metal complex at the surface. Subsequently, the surface-coordinated organometallic complex is reacted with three different carboxylic acids to deliver Cu-O-Zn(O2CR') complexes. Selective nanocrystal surface functionalization is established using spectroscopy (IR, 19F NMR), thermal gravimetric analyses (TGA), transmission electron microscopy (TEM, EELS), and X-ray photoelectron spectroscopy (XPS). Photoluminescence efficiency increases dramatically upon organometallic surface functionalization relative to that of the parent Cu2O NC, with the effect being most pronounced for Zn(II) decoration. The nanocrystal surfaces are selectively functionalized by both organic ligands and well-defined organometallic complexes; this synthetic strategy may be applicable to many other metal oxides, hydroxides, and semiconductors. In the future, it should allow NC properties to be designed for applications including catalysis, sensing, electronics, and quantum technologies.

2D Silver-Nanoplatelets Metasurface for Bright Directional Photoluminescence, Designed with the Local Kirchhoff's Law.

Semiconductor colloidal nanocrystals are excellent light emitters in terms of efficiency and spectral control. They can be integrated with a metasurface to make ultrathin photoluminescent devices with a reduced amount of active material and perform complex functionalities such as beam shaping or polarization control. To design such a metasurface, a quantitative model of the emitted power is needed. Here, we report the design, fabrication, and characterization of a ∼300 nm thick light-emitting device combining a plasmonic metasurface with an ensemble of nanoplatelets. The source has been designed with a methodology based on a local form of Kirchhoff's law. The source displays record high directionality and absorptivity.